All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zhiyuan Lv <zhiyuan.lv@intel.com>
To: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: daniel.vetter@ffwll.ch, intel-gfx@lists.freedesktop.org,
	igvt-g@lists.01.org, david.j.cowperthwaite@intel.com
Subject: Re: Ask for comments of getting guest framebuffer in igvt-g
Date: Fri, 4 Mar 2016 23:38:25 +0800	[thread overview]
Message-ID: <20160304153824.GA11819@zlv-hp-dev> (raw)
In-Reply-To: <1457100027.8300.5.camel@linux.intel.com>

Hi Joonas,

On Fri, Mar 04, 2016 at 04:00:27PM +0200, Joonas Lahtinen wrote:
> Hi,
> 
> On to, 2016-03-03 at 17:50 +0800, Zhiyuan Lv wrote:
> > Dear i915 developers,
> > 
> > Here I have one topic hoping to get your comments and suggestions.
> > Basically it is about graphics virtualization(igvt-g), for the purpose
> > of host system to get virtual machine's framebuffer. We would like to
> > hear your opinions about some design opens. Below is the
> > patch and some more detailed description. We appreciate your time
> > on that, and thanks in advance for any comments!
> > 
> > https://patchwork.freedesktop.org/patch/71852/
> > 
> > When people try igvt-g, one common question we heard is how to get
> > guest VM's framebuffer. It is for various purposes:
> > 
> >  - A compositor in host (it can be QEMU itself or other viewer
> >    applications) can use the contents to render a window in host;
> > 
> >  - Remote protocol can easily handle it to support 3D/Media
> >    accelerated VMs;
> > 
> > The specific requirements include:
> > 
> >  - Be able to map the guest framebuffer so that host CPU can read it;
> >  - Be able to export guest framebuffer through dam_buf;
> >  - Be able to direct render with guest framebuffers;
> > 
> > In order to support that, we introduced a new gem object called
> > gvtbuffer. It is a special object with guest framebuffer's pages as
> > its backing storage. Meanwhile, it could behave normally like other
> > gem objects. It can be mapped, exported and used by EGL APIs.
> > 
> > Although we say guest fb pages for gvtbuffer, the solution itself is
> > safe. Because gvtbuffer gets entries from physical GGTT which cannot
> > be accessed by guest VM directly. igvt-g device model is responsible
> > for filling physical GGTT after translating the iova from guest GGTT
> > table. Even if a malicious guest uses a bad framebuffer, the pages
> > filled in GGTT are always valid. Then when gvtbuffer tries to get some
> > entries, they are always valid address not causing hardware problems.
> > 
> > It is possible, however, that the guest VM performs page flip while
> > gvtbuffer is attached with the framebuffer, and is being used for
> > rendering. That may cause some tearing in theory. But in practice, we
> > did not see that. If that is a concern, we can consider to delay the
> > VBLANK irq injection to guest as a solution.
> > 
> 
> Could you elborate here? I guess the idea is to make the guest think it
> is operating with regular hardware. So I think the owner of a gvtbuffer
> will inject the vblank when it has consumed the current framebuffer
> data, pretty much like with real hardware. Or what else would trigger
> vblank?

The igvt device model is responsible for injecting vblank interrupts to VMs
for i915 running inside. Currently we have a timer for the regular vblank
injection. So if needed, host i915 can notify gvt device model to delay
vblank for a VM, hence delay the flip from VM's point of view. BTW, the idea
of delay is not in current gvt code. We are not sure whether it is a must to
have and whether it is the best way. Just feel that it is doable. Thanks!

Regards,
-Zhiyuan

> 
> Otherwise tearing can not be avoided. Or will the guest be more aware
> of being under graphics virtualization than that?
> 
> Regards, Joonas
> 
> > So in general, do you think it is OK to introduce the gvtbuffer gem
> > object, or there could be better way to handle it in gem framework?
> > 
> > Currently we have a new IOCTL added for the gvtbuffer, and we also
> > added some data structures to describe the framebuffer format for user
> > mode. Do you think that is fine? Thanks again!
> > 
> > Regards,
> > -Zhiyuan
> -- 
> Joonas Lahtinen
> Open Source Technology Center
> Intel Corporation
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-03-04 15:50 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-03  9:50 Ask for comments of getting guest framebuffer in igvt-g Zhiyuan Lv
2016-03-04 14:00 ` Joonas Lahtinen
2016-03-04 15:38   ` Zhiyuan Lv [this message]
2016-03-07 10:20     ` Joonas Lahtinen
2016-03-08  1:25       ` Zhiyuan Lv
2016-03-08  1:44         ` [iGVT-g] " Tian, Kevin
2016-03-08  8:36           ` Gerd Hoffmann
2016-03-10  5:59             ` Tian, Kevin
2016-03-10 10:00             ` Joonas Lahtinen
2016-03-08  2:44 ` Tian, Kevin
2016-03-08  3:09   ` Zhiyuan Lv

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160304153824.GA11819@zlv-hp-dev \
    --to=zhiyuan.lv@intel.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=david.j.cowperthwaite@intel.com \
    --cc=igvt-g@lists.01.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=joonas.lahtinen@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.