On Mon, Mar 14, 2016 at 05:56:30PM +0100, Cédric Le Goater wrote: > From: Benjamin Herrenschmidt > > We use an env. flag which is set to the initial value of MSR_HVB in > the msr_mask. We also adjust the POWER8 mask to set SHV. > > Also use this to adjust ctx.hv so that it is *set* when the processor > doesn't have an HV mode (970 with Apple mode for example), thus enabling > hypervisor instructions/SPRs. > > Signed-off-by: Benjamin Herrenschmidt > Reviewed-by: David Gibson Since this seems to apply purely to improving HV mode support, I'm not yet seeing the case for including this in 2.6. > --- > target-ppc/cpu.h | 4 ++++ > target-ppc/translate.c | 4 +++- > target-ppc/translate_init.c | 19 +++++++++++++++---- > 3 files changed, 22 insertions(+), 5 deletions(-) > > diff --git a/target-ppc/cpu.h b/target-ppc/cpu.h > index a7da0d3e95a9..02aed6427ade 100644 > --- a/target-ppc/cpu.h > +++ b/target-ppc/cpu.h > @@ -1153,6 +1153,10 @@ struct CPUPPCState { > hwaddr mpic_iack; > /* true when the external proxy facility mode is enabled */ > bool mpic_proxy; > + /* set when the processor has an HV mode, thus HV priv > + * instructions and SPRs are diallowed if MSR:HV is 0 > + */ > + bool has_hv_mode; > #endif > > /* Those resources are used only during code translation */ > diff --git a/target-ppc/translate.c b/target-ppc/translate.c > index 327f3259b4be..11801ded62d2 100644 > --- a/target-ppc/translate.c > +++ b/target-ppc/translate.c > @@ -11456,8 +11456,10 @@ void gen_intermediate_code(CPUPPCState *env, struct TranslationBlock *tb) > ctx.exception = POWERPC_EXCP_NONE; > ctx.spr_cb = env->spr_cb; > ctx.pr = msr_pr; > - ctx.hv = !msr_pr && msr_hv; > ctx.mem_idx = env->mmu_idx; > +#if !defined(CONFIG_USER_ONLY) > + ctx.hv = msr_hv || !env->has_hv_mode; > +#endif > ctx.insns_flags = env->insns_flags; > ctx.insns_flags2 = env->insns_flags2; > ctx.access_type = -1; > diff --git a/target-ppc/translate_init.c b/target-ppc/translate_init.c > index 093ef036320d..59a68de0bce8 100644 > --- a/target-ppc/translate_init.c > +++ b/target-ppc/translate_init.c > @@ -8463,6 +8463,7 @@ POWERPC_FAMILY(POWER8)(ObjectClass *oc, void *data) > PPC2_ISA205 | PPC2_ISA207S | PPC2_FP_CVT_S64 | > PPC2_TM; > pcc->msr_mask = (1ull << MSR_SF) | > + (1ull << MSR_SHV) | > (1ull << MSR_TM) | > (1ull << MSR_VR) | > (1ull << MSR_VSX) | > @@ -9876,10 +9877,7 @@ static void ppc_cpu_reset(CPUState *s) > pcc->parent_reset(s); > > msr = (target_ulong)0; > - if (0) { > - /* XXX: find a suitable condition to enable the hypervisor mode */ > - msr |= (target_ulong)MSR_HVB; > - } > + msr |= (target_ulong)MSR_HVB; > msr |= (target_ulong)0 << MSR_AP; /* TO BE CHECKED */ > msr |= (target_ulong)0 << MSR_SA; /* TO BE CHECKED */ > msr |= (target_ulong)1 << MSR_EP; > @@ -9980,6 +9978,19 @@ static void ppc_cpu_initfn(Object *obj) > env->bfd_mach = pcc->bfd_mach; > env->check_pow = pcc->check_pow; > > + /* Mark HV mode as supported if the CPU has an MSR_HV bit > + * in the msr_mask. The mask can later be cleared by PAPR > + * mode but the hv mode support will remain, thus enforcing > + * that we cannot use priv. instructions in guest in PAPR > + * mode. For 970 we currently simply don't set HV in msr_mask > + * thus simulating an "Apple mode" 970. If we ever want to > + * support 970 HV mode, we'll have to add a processor attribute > + * of some sort. > + */ > +#if !defined(CONFIG_USER_ONLY) > + env->has_hv_mode = !!(env->msr_mask & MSR_HVB); > +#endif > + > #if defined(TARGET_PPC64) > if (pcc->sps) { > env->sps = *pcc->sps; -- David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson