From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark D Rustad Date: Fri, 01 Apr 2016 12:18:25 -0700 Subject: [Intel-wired-lan] [PATCH V5 06/11] ixgbe: Read and parse NW_MNG_IF_SEL register In-Reply-To: <20160401191701.120975.34684.stgit@mdrustad-wks.jf.intel.com> References: <20160401191701.120975.34684.stgit@mdrustad-wks.jf.intel.com> Message-ID: <20160401191825.120975.32732.stgit@mdrustad-wks.jf.intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: intel-wired-lan@osuosl.org List-ID: Read the IXGBE_NW_MNG_IF_SEL register and use it to set interface attributes. Signed-off-by: Mark Rustad --- drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 5 +++ drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 37 ++++++++++++++++++++++--- 2 files changed, 37 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index ec67cf06066c..b430c48595ff 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -3648,5 +3648,10 @@ struct ixgbe_info { #define IXGBE_SB_IOSF_TARGET_KX4_PCS1 3 #define IXGBE_NW_MNG_IF_SEL 0x00011178 +#define IXGBE_NW_MNG_IF_SEL_MDIO_ACT BIT(1) +#define IXGBE_NW_MNG_IF_SEL_ENABLE_10_100M BIT(23) #define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE BIT(24) +#define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT 3 +#define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD \ + (0x1F << IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT) #endif /* _IXGBE_TYPE_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index ad5a2d3c42ef..ec06dd4f9804 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -2137,6 +2137,36 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) return status; } +/** + * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register + * @hw: pointer to hardware structure + * + * Read NW_MNG_IF_SEL register and save field values. + */ +static void ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw) +{ + /* Save NW management interface connected on board. This is used + * to determine internal PHY mode. + */ + hw->phy.nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); + + /* If X552 (X550EM_a) and MDIO is connected to external PHY, then set + * PHY address. This register field was has only been used for X552. + */ + if (!hw->phy.nw_mng_if_sel) { + if (hw->mac.type == ixgbe_mac_x550em_a) { + struct ixgbe_adapter *adapter = hw->back; + + e_warn(drv, "nw_mng_if_sel not set\n"); + } + return; + } + + hw->phy.mdio.prtad = (hw->phy.nw_mng_if_sel & + IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD) >> + IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT; +} + /** ixgbe_init_phy_ops_X550em - PHY/SFP specific init * @hw: pointer to hardware structure * @@ -2151,14 +2181,11 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) hw->mac.ops.set_lan_id(hw); + ixgbe_read_mng_if_sel_x550em(hw); + if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) { phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; ixgbe_setup_mux_ctl(hw); - - /* Save NW management interface connected on board. This is used - * to determine internal PHY mode. - */ - phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); } /* Identify the PHY or SFP module */