From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ludovic Desroches <ludovic.desroches@atmel.com>
Date: Fri, 8 Apr 2016 16:32:02 +0200
Subject: [Buildroot] [RFC PATCH] configs: atmel: add sd card demo for
	sama5d2 xplained
In-Reply-To: <1460125841-7648-3-git-send-email-ludovic.desroches@atmel.com>
References: <1460125841-7648-1-git-send-email-ludovic.desroches@atmel.com>
 <1460125841-7648-3-git-send-email-ludovic.desroches@atmel.com>
Message-ID: <20160408143202.GA21807@odux.rfo.atmel.com>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

Sorry, sent by mistake.

On Fri, Apr 08, 2016 at 04:30:38PM +0200, Ludovic Desroches wrote:
> This demo defconfig adds packages to have an equivalent root filesystem
> to the one generated by Yocto with atmel-xplained-demo-image.
> ---
> 
> Hi,
> 
> Since we will remove the at91 fork of the Buildroot repository. We would like
> to provide a turnkey solution as we do with Yocto. At the moment, it is only
> a basic set of packages.
> 
> My concern is we would like to provide a SD card demo but also a NAND demo. It
> means about 6 demo defconfigs to add. Is it an issue?
> 
> Regards
> 
> Ludovic
> 
>  configs/atmel_sama5d2_xplained_mmc_demo_defconfig | 85 +++++++++++++++++++++++
>  1 file changed, 85 insertions(+)
>  create mode 100644 configs/atmel_sama5d2_xplained_mmc_demo_defconfig
> 
> diff --git a/configs/atmel_sama5d2_xplained_mmc_demo_defconfig b/configs/atmel_sama5d2_xplained_mmc_demo_defconfig
> new file mode 100644
> index 0000000..792b8cc
> --- /dev/null
> +++ b/configs/atmel_sama5d2_xplained_mmc_demo_defconfig
> @@ -0,0 +1,85 @@
> +BR2_arm=y
> +BR2_cortex_a5=y
> +BR2_ARM_ENABLE_NEON=y
> +BR2_ARM_ENABLE_VFP=y
> +BR2_ARM_FPU_VFPV4=y
> +BR2_ARM_INSTRUCTIONS_THUMB2=y
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
> +BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
> +BR2_PTHREAD_DEBUG=y
> +BR2_TOOLCHAIN_BUILDROOT_CXX=y
> +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/atmel/sama5d2_xplained_mmc/post-image.sh"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux4sam/linux-at91.git"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="linux4sam_5.2"
> +BR2_LINUX_KERNEL_DEFCONFIG="sama5"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d2_xplained at91-sama5d2_xplained_pda4 at91-sama5d2_xplained_pda7 at91-sama5d2_xplained_pda7b"
> +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
> +BR2_PACKAGE_ALSA_UTILS=y
> +BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
> +BR2_PACKAGE_ALSA_UTILS_APLAY=y
> +BR2_PACKAGE_FFMPEG=y
> +BR2_PACKAGE_FFMPEG_GPL=y
> +BR2_PACKAGE_FFMPEG_SWSCALE=y
> +BR2_PACKAGE_MPG123=y
> +BR2_PACKAGE_BZIP2=y
> +BR2_PACKAGE_GZIP=y
> +BR2_PACKAGE_UNZIP=y
> +BR2_PACKAGE_XZ=y
> +BR2_PACKAGE_ZIP=y
> +BR2_PACKAGE_GDB=y
> +BR2_PACKAGE_LMBENCH=y
> +BR2_PACKAGE_DOSFSTOOLS=y
> +BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y
> +BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y
> +BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
> +BR2_PACKAGE_MMC_UTILS=y
> +BR2_PACKAGE_MTD=y
> +BR2_PACKAGE_WILC1000_FIRMWARE=y
> +BR2_PACKAGE_DEVMEM2=y
> +BR2_PACKAGE_EVTEST=y
> +BR2_PACKAGE_I2C_TOOLS=y
> +BR2_PACKAGE_SETSERIAL=y
> +BR2_PACKAGE_SPI_TOOLS=y
> +BR2_PACKAGE_USBUTILS=y
> +BR2_PACKAGE_LIBDRM=y
> +BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y
> +BR2_PACKAGE_DTC=y
> +BR2_PACKAGE_DTC_PROGRAMS=y
> +BR2_PACKAGE_BLUEZ_UTILS=y
> +BR2_PACKAGE_BRIDGE_UTILS=y
> +BR2_PACKAGE_CAN_UTILS=y
> +BR2_PACKAGE_DROPBEAR=y
> +BR2_PACKAGE_ETHTOOL=y
> +BR2_PACKAGE_IPERF=y
> +BR2_PACKAGE_IPROUTE2=y
> +BR2_PACKAGE_IPTABLES=y
> +BR2_PACKAGE_IW=y
> +BR2_PACKAGE_LRZSZ=y
> +BR2_PACKAGE_MII_DIAG=y
> +BR2_PACKAGE_OPENSSH=y
> +BR2_PACKAGE_WGET=y
> +BR2_PACKAGE_WIRELESS_TOOLS=y
> +BR2_PACKAGE_WPA_SUPPLICANT=y
> +BR2_PACKAGE_BASH=y
> +BR2_PACKAGE_HTOP=y
> +BR2_PACKAGE_VIM=y
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_AT91BOOTSTRAP3=y
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.4"
> +BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d2_xplainedsd_uboot"
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> +BR2_TARGET_UBOOT_CUSTOM_GIT=y
> +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
> +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.2"
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d2_xplained_mmc"
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> -- 
> 2.5.0
>