From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752380AbcDZNai (ORCPT ); Tue, 26 Apr 2016 09:30:38 -0400 Received: from eusmtp01.atmel.com ([212.144.249.243]:13888 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752364AbcDZNad (ORCPT ); Tue, 26 Apr 2016 09:30:33 -0400 Date: Tue, 26 Apr 2016 15:29:22 +0200 From: Ludovic Desroches To: Prabu Thangamuthu CC: Jaehoon Chung , Ludovic Desroches , "Ulf Hansson (ulf.hansson@linaro.org)" , Adrian Hunter , Bjorn Helgaas , Andrew Morton , "David S. Miller" , Greg Kroah-Hartman , Kalle Valo , Mauro Carvalho Chehab , Guenter Roeck , Jiri Slaby , Chaotian Jing , Andrei Pistirica , Ben Hutchings , Joshua Henderson , Manjunath M Bettegowda , "linux-mmc@vger.kernel.org" , "linux-kernel@vger.kernel.org" , CPGS Subject: Re: [PATCH v3] mmc: sdhci-pci: add Support of Synopsys DWC_MSHC IP Message-ID: <20160426132922.GE8756@odux.rfo.atmel.com> Mail-Followup-To: Prabu Thangamuthu , Jaehoon Chung , "Ulf Hansson (ulf.hansson@linaro.org)" , Adrian Hunter , Bjorn Helgaas , Andrew Morton , "David S. Miller" , Greg Kroah-Hartman , Kalle Valo , Mauro Carvalho Chehab , Guenter Roeck , Jiri Slaby , Chaotian Jing , Andrei Pistirica , Ben Hutchings , Joshua Henderson , Manjunath M Bettegowda , "linux-mmc@vger.kernel.org" , "linux-kernel@vger.kernel.org" , CPGS References: <705D14B1C7978B40A723277C067CEDE2010A4B12F8@IN01WEMBXB.internal.synopsys.com> <20160426085845.GA8756@odux.rfo.atmel.com> <571F46C9.9050905@samsung.com> <705D14B1C7978B40A723277C067CEDE2010A4B4B87@IN01WEMBXB.internal.synopsys.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline In-Reply-To: <705D14B1C7978B40A723277C067CEDE2010A4B4B87@IN01WEMBXB.internal.synopsys.com> User-Agent: Mutt/1.5.24 (2015-08-30) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, Apr 26, 2016 at 12:31:50PM +0000, Prabu Thangamuthu wrote: > Hi Ludovic, Jaehoon Chung, > > Thank you for your review comments, > > On 04/26/2016 04:15 PM, Jaehoon Chung wrote: > > > > On 04/26/2016 05:58 PM, Ludovic Desroches wrote: > > > On Wed, Apr 20, 2016 at 12:22:59PM +0000, Prabu Thangamuthu wrote: > > >> Patch for Standard SD Host Controller Interface compliant Synopsys > > >> sdhci-dwc controller driver. This code supports PCI based interface. > > >> > > >> Signed-off-by: Prabu Thangamuthu > > >> --- > > >> Change log v3: > > >> -Removed unused code. > > >> -Updated review comments. > > >> > > >> Change log v2: > > >> -Removed Synopsys specific PCI device ID's from pci_ids.h. > > >> -Updated the PCI device ID's in sdhci-pci-core.c. > > >> > > >> MAINTAINERS | 7 + > > >> drivers/mmc/host/Makefile | 3 +- > > >> drivers/mmc/host/sdhci-pci-core.c | 14 ++ > > >> drivers/mmc/host/sdhci-pci-dwc.c | 260 > > >> ++++++++++++++++++++++++++++++++++++++ > > >> drivers/mmc/host/sdhci-pci-dwc.h | 55 ++++++++ > > >> 5 files changed, 338 insertions(+), 1 deletion(-) create mode > > >> 100644 drivers/mmc/host/sdhci-pci-dwc.c create mode 100644 > > >> drivers/mmc/host/sdhci-pci-dwc.h > > >> [snip] > > >> diff --git a/drivers/mmc/host/sdhci-pci-dwc.c > > >> b/drivers/mmc/host/sdhci-pci-dwc.c > > >> new file mode 100644 > > >> index 0000000..3490af8 > > >> --- /dev/null > > >> +++ b/drivers/mmc/host/sdhci-pci-dwc.c > > >> @@ -0,0 +1,260 @@ > > >> +/* > > >> + * Copyright (C) 2016 Synopsys, Inc. > > >> + * > > >> + * Author: Manjunath M B > > >> + * > > >> + * This software is licensed under the terms of the GNU General > > >> +Public > > >> + * License version 2, as published by the Free Software Foundation, > > >> +and > > >> + * may be copied, distributed, and modified under those terms. > > >> + * > > >> + * This program is distributed in the hope that it will be useful, > > >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > >> + * GNU General Public License for more details. > > >> + * > > >> + */ > > >> + > > >> +#include > > >> +#include > > >> +#include > > >> +#include > > >> + > > >> +#include "sdhci.h" > > >> +#include "sdhci-pci.h" > > >> +#include "sdhci-pci-dwc.h" > > >> + > > >> > > +/********************************************************* > > ********************\ > > >> + * * > > >> + * Hardware specific clock handling * > > >> + * * > > >> > > +\********************************************************* > > ********************/ > > >> +static const struct sdhci_ops *sdhci_ops; /* Low level hw interface */ > > >> + [snip] > > >> +static void sdhci_set_clock_snps(struct sdhci_host *host, > > >> + unsigned int clock) > > >> +{ > > >> + int div = 0; > > >> + int mul = 0; > > >> + int div_val = 0; > > >> + int mul_val = 0; > > >> + int mul_div_val = 0; > > >> + u32 reg = 0; > > >> + u16 clk = 0; > > >> + u16 vendor_ptr = 0; > > >> + u32 mask = 0; > > >> + unsigned long timeout; > > >> + u32 tx_clk_phase_val = SDHC_DEF_TX_CLK_PH_VAL; > > >> + u32 rx_clk_phase_val = SDHC_DEF_RX_CLK_PH_VAL; > > >> + > > > > > > Some variables don't need to be initialized here. > > > > tx/rx_clk_phase_val don't need? > > i didn't see any modifying these vales. > > > > And some variables don't need to define..can be reused. > > > OK, We will update it accordingly. > > > > > > >> + /* > > >> + * if clock is less than 25MHz, divided clock is used. > > >> + * For divided clock, we can use the standard sdhci_set_clock(). > > >> + * For clock above 25MHz, DRP clock is used > > >> + * Here, we cannot use sdhci_set_clock(), we need to program > > >> + * TX RX CLOCK DCM DRP for appropriate clock > > >> + */ > > >> + > > >> + if (clock <= 25000000) { > > >> + /* Then call generic set_clock */ > > >> + if (sdhci_ops->set_clock) > > >> + sdhci_ops->set_clock(host, clock); > > > > > > I am not sure about this part. You may simply call sdhci_set_clock() > > > instead of sdhci_ops->set_clock(). See my latest comment, it is not > > > clear what is behind set_clock(). > > > > > As we have built our own clocking logic using DCM, we want to use our > own set_clock function for the frequency above 25MHz. > For lower frequencies, our clocking module program is same as sdhci_set_clock(). > So we are calling sdhci_ops->set_clock() which is same as sdhci_set_clock(). > > > >> + } else { > > >> + > > >> + host->mmc->actual_clock = 0; > > >> + vendor_ptr = sdhci_readw(host, SDHCI_UHS2_VENDOR); > > >> + > > >> + /* Select un-phase shifted clock before reset Tx Tuning > > DCM*/ > > >> + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); > > >> + reg &= ~SDHC_TX_CLK_SEL_TUNED; > > >> + sdhci_writel(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); > > >> + mdelay(10); > > >> + > > >> + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); > > >> + > > >> + /* Lets chose the Mulitplier value to be 0x2 */ > > >> + mul = 0x2; > > >> + for (div = 1; div <= 32; div++) { > > >> + if (((host->max_clk * mul) / div) > > >> + <= clock) > > >> + break; > > >> + } > > >> + /* > > >> + * Set Programmable Clock Mode in the Clock > > >> + * Control register. > > >> + */ > > >> + div_val = div - 1; > > >> + mul_val = mul - 1; > > >> + > > >> + host->mmc->actual_clock = (host->max_clk * mul) / div; > > >> + /* > > >> + * Program the DCM DRP > > >> + * Step 1: Assert DCM Reset > > >> + * Step 2: Program the mul and div values in DRP > > >> + * Step 3: Read from DRP base 0x00 to restore DCM output as > > per > > >> + * > > www.xilinx.com/support/documentation/user_guides/ug191.pdf > > >> + * Step 4: De-Assert reset to DCM > > >> + */ > > >> + > > >> + mask = SDHC_CARD_TX_CLK_DCM_RST; > > >> + snps_reset_dcm(host, mask, 1); > > >> + > > >> + mul_div_val = (mul_val << 8) | div_val; > > >> + sdhci_writew(host, mul_div_val, > > TXRX_CLK_DCM_MUL_DIV_DRP); > > >> + > > >> + reg = sdhci_readl(host, TXRX_CLK_DCM_DRP_BASE_51); > > >> + > > >> + snps_reset_dcm(host, mask, 0); > > >> + > > >> + clk |= SDHCI_PROG_CLOCK_MODE | SDHCI_CLOCK_INT_EN; > > >> + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); > > >> + > > >> + /* Wait max 20 ms */ > > >> + timeout = 20; > > >> + while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) > > >> + & SDHCI_CLOCK_INT_STABLE)) { > > >> + if (timeout == 0) { > > >> + pr_err("%s: Internal clock never stabilised\n", > > >> + mmc_hostname(host- > > >mmc)); > > >> + return; > > >> + } > > >> + timeout--; > > >> + mdelay(1); > > >> + } > > >> + > > >> + clk |= SDHCI_CLOCK_CARD_EN; > > >> + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); > > >> + > > >> + /* > > >> + * This Clock might have affected the TX CLOCK DCM and RX > > CLOCK > > >> + * DCM which are used for Phase control; Reset these DCM's > > >> + * for proper clock output > > >> + * > > >> + * Step 1: Reset the DCM > > >> + * Step 2: De-Assert reset to DCM > > >> + */ > > >> + > > >> + mask = SDHC_TUNING_TX_CLK_DCM_RST | > > SDHC_TUNING_RX_CLK_DCM_RST; > > >> + snps_reset_dcm(host, mask, 1); > > >> + mdelay(10); > > >> + snps_reset_dcm(host, mask, 0); > > >> + > > >> + /* Select working phase value if clock is <= 50MHz */ > > >> + if (clock <= 50000000) { > > >> + /*Change the Tx Phase value here */ > > >> + reg = sdhci_readl(host, (SDHC_GPIO_OUT + > > vendor_ptr)); > > >> + reg |= (SDHC_TUNING_TX_CLK_SEL_MASK & > > >> + (tx_clk_phase_val << > > SDHC_TUNING_TX_CLK_SEL_SHIFT)); > > >> + > > >> + sdhci_writel(host, reg, (SDHC_GPIO_OUT + > > vendor_ptr)); > > >> + mdelay(10); > > >> + > > >> + /* Program to select phase shifted clock */ > > >> + reg |= SDHC_TX_CLK_SEL_TUNED; > > >> + sdhci_writel(host, reg, (SDHC_GPIO_OUT + > > vendor_ptr)); > > >> + > > >> + /* > > >> + * For 50Mhz, tuning is not possible. > > >> + * Lets fix the sampling Phase of Rx Clock here. > > >> + */ > > >> + reg = sdhci_readl(host, (SDHC_DBOUNCE + > > vendor_ptr)); > > >> + reg &= ~SDHC_TUNING_RX_CLK_SEL_MASK; > > >> + reg |= (SDHC_TUNING_RX_CLK_SEL_MASK & > > >> + rx_clk_phase_val); > > >> + sdhci_writel(host, reg, (SDHC_DBOUNCE + > > vendor_ptr)); > > >> + } > > >> + mdelay(10); > > >> + } > > >> +} [snip] > > >> +static struct sdhci_ops sdhci_pci_ops_snps = { > > >> + .set_clock = sdhci_set_clock_snps, > > >> +}; > > >> + > > >> +int sdhci_pci_probe_slot_snps(struct sdhci_pci_slot *slot) { > > >> + int ret = 0; > > >> + struct sdhci_host *host; > > >> + > > >> + host = slot->host; > > >> + sdhci_ops = host->ops; > > >> + > > >> + sdhci_pci_ops_snps.enable_dma = sdhci_ops- > > >enable_dma; > > >> + sdhci_pci_ops_snps.set_bus_width = sdhci_ops->set_bus_width; > > >> + sdhci_pci_ops_snps.reset = sdhci_ops->reset; > > >> + sdhci_pci_ops_snps.set_uhs_signaling = sdhci_ops- > > >set_uhs_signaling; > > >> + sdhci_pci_ops_snps.hw_reset = sdhci_ops->hw_reset; > > >> + > > >> + host->ops = &sdhci_pci_ops_snps; > > > > > > I am lost. sdhci_ops is a kind of backup of the original ops from pci > > > core. Your sdhci_pci_ops_snps is a copy of ops from pci core excepting > > > set_clock and finally you update pci core ops with sdhci_pci_ops_snps. > > > > > > It seems a bit complex. At the end, unless I have missed something, > > > you have only changed set_clock from pci ops. > > > > > You are correct, sdhci_pci_ops_snps is using pci core ops except set_clock. > As I mentioned at the top, We have built our own clocking logic using DCM. > So, we have to use our own set_clock function and We are reusing the pci core > ops for the reaming ops. Ok so I have well understood. Any reason to not do it this way: -static const struct sdhci_ops *sdhci_ops; -static struct sdhci_ops sdhci_pci_ops_snps = { - .set_clock = sdhci_set_clock_snps, -}; +int sdhci_pci_probe_slot_snps(struct sdhci_pci_slot *slot) { + int ret = 0; + struct sdhci_host *host; + + host = slot->host; + host->ops->set_clock = &sdhci_set_clock_snps; And use sdhci_set_clock() instead of sdhci_ops->set_clock. At the first read, I thought you are not calling sdhci_set_clock() but sdhci_set_clock_snps() but I understood later that sdhci_ops is different from host->ops which is a bit confusing. Regards Ludovic From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ludovic Desroches Subject: Re: [PATCH v3] mmc: sdhci-pci: add Support of Synopsys DWC_MSHC IP Date: Tue, 26 Apr 2016 15:29:22 +0200 Message-ID: <20160426132922.GE8756@odux.rfo.atmel.com> References: <705D14B1C7978B40A723277C067CEDE2010A4B12F8@IN01WEMBXB.internal.synopsys.com> <20160426085845.GA8756@odux.rfo.atmel.com> <571F46C9.9050905@samsung.com> <705D14B1C7978B40A723277C067CEDE2010A4B4B87@IN01WEMBXB.internal.synopsys.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Return-path: Content-Disposition: inline In-Reply-To: <705D14B1C7978B40A723277C067CEDE2010A4B4B87@IN01WEMBXB.internal.synopsys.com> Sender: linux-kernel-owner@vger.kernel.org To: Prabu Thangamuthu Cc: Jaehoon Chung , Ludovic Desroches , "Ulf Hansson (ulf.hansson@linaro.org)" , Adrian Hunter , Bjorn Helgaas , Andrew Morton , "David S. Miller" , Greg Kroah-Hartman , Kalle Valo , Mauro Carvalho Chehab , Guenter Roeck , Jiri Slaby , Chaotian Jing , Andrei Pistirica , Ben Hutchings , Joshua Henderson , Manjunath M Bettegowda , "linux-mmc@vger.kernel.org" , "linux-kernel@vger.kernel.org" List-Id: linux-mmc@vger.kernel.org On Tue, Apr 26, 2016 at 12:31:50PM +0000, Prabu Thangamuthu wrote: > Hi Ludovic, Jaehoon Chung, > > Thank you for your review comments, > > On 04/26/2016 04:15 PM, Jaehoon Chung wrote: > > > > On 04/26/2016 05:58 PM, Ludovic Desroches wrote: > > > On Wed, Apr 20, 2016 at 12:22:59PM +0000, Prabu Thangamuthu wrote: > > >> Patch for Standard SD Host Controller Interface compliant Synopsys > > >> sdhci-dwc controller driver. This code supports PCI based interface. > > >> > > >> Signed-off-by: Prabu Thangamuthu > > >> --- > > >> Change log v3: > > >> -Removed unused code. > > >> -Updated review comments. > > >> > > >> Change log v2: > > >> -Removed Synopsys specific PCI device ID's from pci_ids.h. > > >> -Updated the PCI device ID's in sdhci-pci-core.c. > > >> > > >> MAINTAINERS | 7 + > > >> drivers/mmc/host/Makefile | 3 +- > > >> drivers/mmc/host/sdhci-pci-core.c | 14 ++ > > >> drivers/mmc/host/sdhci-pci-dwc.c | 260 > > >> ++++++++++++++++++++++++++++++++++++++ > > >> drivers/mmc/host/sdhci-pci-dwc.h | 55 ++++++++ > > >> 5 files changed, 338 insertions(+), 1 deletion(-) create mode > > >> 100644 drivers/mmc/host/sdhci-pci-dwc.c create mode 100644 > > >> drivers/mmc/host/sdhci-pci-dwc.h > > >> [snip] > > >> diff --git a/drivers/mmc/host/sdhci-pci-dwc.c > > >> b/drivers/mmc/host/sdhci-pci-dwc.c > > >> new file mode 100644 > > >> index 0000000..3490af8 > > >> --- /dev/null > > >> +++ b/drivers/mmc/host/sdhci-pci-dwc.c > > >> @@ -0,0 +1,260 @@ > > >> +/* > > >> + * Copyright (C) 2016 Synopsys, Inc. > > >> + * > > >> + * Author: Manjunath M B > > >> + * > > >> + * This software is licensed under the terms of the GNU General > > >> +Public > > >> + * License version 2, as published by the Free Software Foundation, > > >> +and > > >> + * may be copied, distributed, and modified under those terms. > > >> + * > > >> + * This program is distributed in the hope that it will be useful, > > >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > >> + * GNU General Public License for more details. > > >> + * > > >> + */ > > >> + > > >> +#include > > >> +#include > > >> +#include > > >> +#include > > >> + > > >> +#include "sdhci.h" > > >> +#include "sdhci-pci.h" > > >> +#include "sdhci-pci-dwc.h" > > >> + > > >> > > +/********************************************************* > > ********************\ > > >> + * * > > >> + * Hardware specific clock handling * > > >> + * * > > >> > > +\********************************************************* > > ********************/ > > >> +static const struct sdhci_ops *sdhci_ops; /* Low level hw interface */ > > >> + [snip] > > >> +static void sdhci_set_clock_snps(struct sdhci_host *host, > > >> + unsigned int clock) > > >> +{ > > >> + int div = 0; > > >> + int mul = 0; > > >> + int div_val = 0; > > >> + int mul_val = 0; > > >> + int mul_div_val = 0; > > >> + u32 reg = 0; > > >> + u16 clk = 0; > > >> + u16 vendor_ptr = 0; > > >> + u32 mask = 0; > > >> + unsigned long timeout; > > >> + u32 tx_clk_phase_val = SDHC_DEF_TX_CLK_PH_VAL; > > >> + u32 rx_clk_phase_val = SDHC_DEF_RX_CLK_PH_VAL; > > >> + > > > > > > Some variables don't need to be initialized here. > > > > tx/rx_clk_phase_val don't need? > > i didn't see any modifying these vales. > > > > And some variables don't need to define..can be reused. > > > OK, We will update it accordingly. > > > > > > >> + /* > > >> + * if clock is less than 25MHz, divided clock is used. > > >> + * For divided clock, we can use the standard sdhci_set_clock(). > > >> + * For clock above 25MHz, DRP clock is used > > >> + * Here, we cannot use sdhci_set_clock(), we need to program > > >> + * TX RX CLOCK DCM DRP for appropriate clock > > >> + */ > > >> + > > >> + if (clock <= 25000000) { > > >> + /* Then call generic set_clock */ > > >> + if (sdhci_ops->set_clock) > > >> + sdhci_ops->set_clock(host, clock); > > > > > > I am not sure about this part. You may simply call sdhci_set_clock() > > > instead of sdhci_ops->set_clock(). See my latest comment, it is not > > > clear what is behind set_clock(). > > > > > As we have built our own clocking logic using DCM, we want to use our > own set_clock function for the frequency above 25MHz. > For lower frequencies, our clocking module program is same as sdhci_set_clock(). > So we are calling sdhci_ops->set_clock() which is same as sdhci_set_clock(). > > > >> + } else { > > >> + > > >> + host->mmc->actual_clock = 0; > > >> + vendor_ptr = sdhci_readw(host, SDHCI_UHS2_VENDOR); > > >> + > > >> + /* Select un-phase shifted clock before reset Tx Tuning > > DCM*/ > > >> + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); > > >> + reg &= ~SDHC_TX_CLK_SEL_TUNED; > > >> + sdhci_writel(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); > > >> + mdelay(10); > > >> + > > >> + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); > > >> + > > >> + /* Lets chose the Mulitplier value to be 0x2 */ > > >> + mul = 0x2; > > >> + for (div = 1; div <= 32; div++) { > > >> + if (((host->max_clk * mul) / div) > > >> + <= clock) > > >> + break; > > >> + } > > >> + /* > > >> + * Set Programmable Clock Mode in the Clock > > >> + * Control register. > > >> + */ > > >> + div_val = div - 1; > > >> + mul_val = mul - 1; > > >> + > > >> + host->mmc->actual_clock = (host->max_clk * mul) / div; > > >> + /* > > >> + * Program the DCM DRP > > >> + * Step 1: Assert DCM Reset > > >> + * Step 2: Program the mul and div values in DRP > > >> + * Step 3: Read from DRP base 0x00 to restore DCM output as > > per > > >> + * > > www.xilinx.com/support/documentation/user_guides/ug191.pdf > > >> + * Step 4: De-Assert reset to DCM > > >> + */ > > >> + > > >> + mask = SDHC_CARD_TX_CLK_DCM_RST; > > >> + snps_reset_dcm(host, mask, 1); > > >> + > > >> + mul_div_val = (mul_val << 8) | div_val; > > >> + sdhci_writew(host, mul_div_val, > > TXRX_CLK_DCM_MUL_DIV_DRP); > > >> + > > >> + reg = sdhci_readl(host, TXRX_CLK_DCM_DRP_BASE_51); > > >> + > > >> + snps_reset_dcm(host, mask, 0); > > >> + > > >> + clk |= SDHCI_PROG_CLOCK_MODE | SDHCI_CLOCK_INT_EN; > > >> + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); > > >> + > > >> + /* Wait max 20 ms */ > > >> + timeout = 20; > > >> + while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) > > >> + & SDHCI_CLOCK_INT_STABLE)) { > > >> + if (timeout == 0) { > > >> + pr_err("%s: Internal clock never stabilised\n", > > >> + mmc_hostname(host- > > >mmc)); > > >> + return; > > >> + } > > >> + timeout--; > > >> + mdelay(1); > > >> + } > > >> + > > >> + clk |= SDHCI_CLOCK_CARD_EN; > > >> + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); > > >> + > > >> + /* > > >> + * This Clock might have affected the TX CLOCK DCM and RX > > CLOCK > > >> + * DCM which are used for Phase control; Reset these DCM's > > >> + * for proper clock output > > >> + * > > >> + * Step 1: Reset the DCM > > >> + * Step 2: De-Assert reset to DCM > > >> + */ > > >> + > > >> + mask = SDHC_TUNING_TX_CLK_DCM_RST | > > SDHC_TUNING_RX_CLK_DCM_RST; > > >> + snps_reset_dcm(host, mask, 1); > > >> + mdelay(10); > > >> + snps_reset_dcm(host, mask, 0); > > >> + > > >> + /* Select working phase value if clock is <= 50MHz */ > > >> + if (clock <= 50000000) { > > >> + /*Change the Tx Phase value here */ > > >> + reg = sdhci_readl(host, (SDHC_GPIO_OUT + > > vendor_ptr)); > > >> + reg |= (SDHC_TUNING_TX_CLK_SEL_MASK & > > >> + (tx_clk_phase_val << > > SDHC_TUNING_TX_CLK_SEL_SHIFT)); > > >> + > > >> + sdhci_writel(host, reg, (SDHC_GPIO_OUT + > > vendor_ptr)); > > >> + mdelay(10); > > >> + > > >> + /* Program to select phase shifted clock */ > > >> + reg |= SDHC_TX_CLK_SEL_TUNED; > > >> + sdhci_writel(host, reg, (SDHC_GPIO_OUT + > > vendor_ptr)); > > >> + > > >> + /* > > >> + * For 50Mhz, tuning is not possible. > > >> + * Lets fix the sampling Phase of Rx Clock here. > > >> + */ > > >> + reg = sdhci_readl(host, (SDHC_DBOUNCE + > > vendor_ptr)); > > >> + reg &= ~SDHC_TUNING_RX_CLK_SEL_MASK; > > >> + reg |= (SDHC_TUNING_RX_CLK_SEL_MASK & > > >> + rx_clk_phase_val); > > >> + sdhci_writel(host, reg, (SDHC_DBOUNCE + > > vendor_ptr)); > > >> + } > > >> + mdelay(10); > > >> + } > > >> +} [snip] > > >> +static struct sdhci_ops sdhci_pci_ops_snps = { > > >> + .set_clock = sdhci_set_clock_snps, > > >> +}; > > >> + > > >> +int sdhci_pci_probe_slot_snps(struct sdhci_pci_slot *slot) { > > >> + int ret = 0; > > >> + struct sdhci_host *host; > > >> + > > >> + host = slot->host; > > >> + sdhci_ops = host->ops; > > >> + > > >> + sdhci_pci_ops_snps.enable_dma = sdhci_ops- > > >enable_dma; > > >> + sdhci_pci_ops_snps.set_bus_width = sdhci_ops->set_bus_width; > > >> + sdhci_pci_ops_snps.reset = sdhci_ops->reset; > > >> + sdhci_pci_ops_snps.set_uhs_signaling = sdhci_ops- > > >set_uhs_signaling; > > >> + sdhci_pci_ops_snps.hw_reset = sdhci_ops->hw_reset; > > >> + > > >> + host->ops = &sdhci_pci_ops_snps; > > > > > > I am lost. sdhci_ops is a kind of backup of the original ops from pci > > > core. Your sdhci_pci_ops_snps is a copy of ops from pci core excepting > > > set_clock and finally you update pci core ops with sdhci_pci_ops_snps. > > > > > > It seems a bit complex. At the end, unless I have missed something, > > > you have only changed set_clock from pci ops. > > > > > You are correct, sdhci_pci_ops_snps is using pci core ops except set_clock. > As I mentioned at the top, We have built our own clocking logic using DCM. > So, we have to use our own set_clock function and We are reusing the pci core > ops for the reaming ops. Ok so I have well understood. Any reason to not do it this way: -static const struct sdhci_ops *sdhci_ops; -static struct sdhci_ops sdhci_pci_ops_snps = { - .set_clock = sdhci_set_clock_snps, -}; +int sdhci_pci_probe_slot_snps(struct sdhci_pci_slot *slot) { + int ret = 0; + struct sdhci_host *host; + + host = slot->host; + host->ops->set_clock = &sdhci_set_clock_snps; And use sdhci_set_clock() instead of sdhci_ops->set_clock. At the first read, I thought you are not calling sdhci_set_clock() but sdhci_set_clock_snps() but I understood later that sdhci_ops is different from host->ops which is a bit confusing. Regards Ludovic