From: embedded0n3 <jainformatyka@interia.pl>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [Bug 1579327] [NEW] emulation of vexpress-a9 vexpress-a15 in multicore mode seems to be broken
Date: Sat, 07 May 2016 08:08:57 -0000 [thread overview]
Message-ID: <20160507080857.903.95152.malonedeb@chaenomeles.canonical.com> (raw)
Public bug reported:
Report based on:
https://stackoverflow.com/questions/37068688/have-you-got-issues-with-running-u-boot-for-versatile-express-a9-platform-under
I don't see any bug reports about vexpress boards emulation here, so I
decided to let you know:
version tested: qemu 2.0.0 on 32 bit Debian GNU/Linux
There are issues with running u-boot on qemu vexpress-a9 ( it was reported to work ok at physical multicore board ) and vexpress-a15 with parameters -smp cores=2 r 3 or 4.
So far those are two tested. I dont know ATM if any other board emulation works in multiprocessor mode
Original post at stackoverflow:
---------------------------------------------------------------------------------------------------
I have tried numerous releases of u-boot since vexpress-a9 was introduced in u-bot stable release. Under qemu with multicore emulation its behaving unstable - mostly crashes instantly after loading. Sometimes it loads without issues but its rare. My version of qemu is 2.0.0 on x86 32bit Debian. I would be interested to hear if you succeeded in runing it under qemu with multicore emulation ( if yes which version of qemu and u-boot ) or physical versatile express board with multiple cores.
Example outputs are
$ qemu-system-arm -M vexpress-a9 -nographic -kernel u-boot -smp cores=2
U-Boot 2013.01.01-dirty (May 05 2016 - 08:27:19)
DRAM: 128 MiB
WARNING: Caches not enabled
undefined instruction
pc : [<00000000>] lr : [<00000000>]
sp : 60000ef0 ip : 67eedfd8 fp : 00000000
r10: 00000000 r9 : 00000000 r8 : 60000f00
r7 : 00000000 r6 : 608146ac r5 : 60828365 r4 : 0000004d
r3 : 00000000 r2 : 00000000 r1 : 60000f80 r0 : 47cc9e10
Flags: nzcv IRQs on FIQs on Mode USER_26
Resetting CPU ...
resetting ...
Flash: 256 MiB
MMC: MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: smc911x-0
Warning: smc911x-0 using MAC address from net device
Hit any key to stop autoboot: 0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
VExpress#
This time it was loaded
Other time it was not...
$ qemu-system-arm -M vexpress-a9 -nographic -kernel u-boot -smp cores=2
U-Boot 2013.01.01-dirty (May 05 2016 - 08:27:19)
DRAM: 128 MiB
WARNING: Caches not enabled
U-Boot 2013.01.01-dirty (May 05 2016 - 08:27:19)
DRAM: 128 MiB
WARNING: Caches not enabled
Flash: 256 MiB
MMC: MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: smc911x-0
Warning: smc911x-0 using MAC address from net device
Hit any key to stop autoboot: 2 qemu: fatal: Trying to execute code
outside RAM or ROM at 0x6f71c004
R00=00418937 R01=000003e8 R02=00418937 R03=00000000
R04=00000000 R05=67eedf58 R06=67f8e000 R07=00000002
R08=00418937 R09=0778e000 R10=6082f688 R11=00000000
R12=67eedfd8 R13=00000000 R14=67fb82c0 R15=6f71c004
PSR=200001db --C- A und32
s00=00000000 s01=00000000 d00=0000000000000000
s02=00000000 s03=00000000 d01=0000000000000000
s04=00000000 s05=00000000 d02=0000000000000000
s06=00000000 s07=00000000 d03=0000000000000000
s08=00000000 s09=00000000 d04=0000000000000000
s10=00000000 s11=00000000 d05=0000000000000000
vs12=00000000 s13=00000000 d06=0000000000000000
s14=00000000 s15=00000000 d07=0000000000000000
s16=00000000 s17=00000000 d08=0000000000000000
s18=00000000 s19=00000000 d09=0000000000000000
s20=00000000 s21=00000000 d10=0000000000000000
s22=00000000 s23=00000000 d11=0000000000000000
s24=00000000 s25=00000000 d12=0000000000000000
s26=00000000 s27=00000000 d13=0000000000000000
s28=00000000 s29=00000000 d14=0000000000000000
s30=00000000 s31=00000000 d15=0000000000000000
s32=00000000 s33=00000000 d16=0000000000000000
s34=00000000 s35=00000000 d17=0000000000000000
s36=00000000 s37=00000000 d18=0000000000000000
s38=00000000 s39=00000000 d19=0000000000000000
s40=00000000 s41=00000000 d20=0000000000000000
s42=00000000 s43=00000000 d21=0000000000000000
s44=00000000 s45=00000000 d22=0000000000000000
s46=00000000 s47=00000000 d23=0000000000000000
s48=00000000 s49=00000000 d24=0000000000000000
s50=00000000 s51=00000000 d25=0000000000000000
s52=00000000 s53=00000000 d26=0000000000000000
s54=00000000 s55=00000000 d27=0000000000000000
s56=00000000 s57=00000000 d28=0000000000000000
s58=00000000 s59=00000000 d29=0000000000000000
s60=00000000 s61=00000000 d30=0000000000000000
s62=00000000 s63=00000000 d31=0000000000000000
FPSCR: 00000000
-------------------------------------------------------------------------------------------------
end of post
Original discussion at ( includes comments of head custodian of Das U-boot about u-boot working on physical board versatile express a9 and him having issues with runing Linux distro at qemu vexpress-a9 board emulation ):
https://stackoverflow.com/questions/37068688/have-you-got-issues-with-running-u-boot-for-versatile-express-a9-platform-under
** Affects: qemu
Importance: Undecided
Status: New
** Tags: arm armv7 multicore
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1579327
Title:
emulation of vexpress-a9 vexpress-a15 in multicore mode seems to be
broken
Status in QEMU:
New
Bug description:
Report based on:
https://stackoverflow.com/questions/37068688/have-you-got-issues-with-running-u-boot-for-versatile-express-a9-platform-under
I don't see any bug reports about vexpress boards emulation here, so I
decided to let you know:
version tested: qemu 2.0.0 on 32 bit Debian GNU/Linux
There are issues with running u-boot on qemu vexpress-a9 ( it was reported to work ok at physical multicore board ) and vexpress-a15 with parameters -smp cores=2 r 3 or 4.
So far those are two tested. I dont know ATM if any other board emulation works in multiprocessor mode
Original post at stackoverflow:
---------------------------------------------------------------------------------------------------
I have tried numerous releases of u-boot since vexpress-a9 was introduced in u-bot stable release. Under qemu with multicore emulation its behaving unstable - mostly crashes instantly after loading. Sometimes it loads without issues but its rare. My version of qemu is 2.0.0 on x86 32bit Debian. I would be interested to hear if you succeeded in runing it under qemu with multicore emulation ( if yes which version of qemu and u-boot ) or physical versatile express board with multiple cores.
Example outputs are
$ qemu-system-arm -M vexpress-a9 -nographic -kernel u-boot -smp cores=2
U-Boot 2013.01.01-dirty (May 05 2016 - 08:27:19)
DRAM: 128 MiB
WARNING: Caches not enabled
undefined instruction
pc : [<00000000>] lr : [<00000000>]
sp : 60000ef0 ip : 67eedfd8 fp : 00000000
r10: 00000000 r9 : 00000000 r8 : 60000f00
r7 : 00000000 r6 : 608146ac r5 : 60828365 r4 : 0000004d
r3 : 00000000 r2 : 00000000 r1 : 60000f80 r0 : 47cc9e10
Flags: nzcv IRQs on FIQs on Mode USER_26
Resetting CPU ...
resetting ...
Flash: 256 MiB
MMC: MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: smc911x-0
Warning: smc911x-0 using MAC address from net device
Hit any key to stop autoboot: 0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
VExpress#
This time it was loaded
Other time it was not...
$ qemu-system-arm -M vexpress-a9 -nographic -kernel u-boot -smp
cores=2
U-Boot 2013.01.01-dirty (May 05 2016 - 08:27:19)
DRAM: 128 MiB
WARNING: Caches not enabled
U-Boot 2013.01.01-dirty (May 05 2016 - 08:27:19)
DRAM: 128 MiB
WARNING: Caches not enabled
Flash: 256 MiB
MMC: MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: smc911x-0
Warning: smc911x-0 using MAC address from net device
Hit any key to stop autoboot: 2 qemu: fatal: Trying to execute code
outside RAM or ROM at 0x6f71c004
R00=00418937 R01=000003e8 R02=00418937 R03=00000000
R04=00000000 R05=67eedf58 R06=67f8e000 R07=00000002
R08=00418937 R09=0778e000 R10=6082f688 R11=00000000
R12=67eedfd8 R13=00000000 R14=67fb82c0 R15=6f71c004
PSR=200001db --C- A und32
s00=00000000 s01=00000000 d00=0000000000000000
s02=00000000 s03=00000000 d01=0000000000000000
s04=00000000 s05=00000000 d02=0000000000000000
s06=00000000 s07=00000000 d03=0000000000000000
s08=00000000 s09=00000000 d04=0000000000000000
s10=00000000 s11=00000000 d05=0000000000000000
vs12=00000000 s13=00000000 d06=0000000000000000
s14=00000000 s15=00000000 d07=0000000000000000
s16=00000000 s17=00000000 d08=0000000000000000
s18=00000000 s19=00000000 d09=0000000000000000
s20=00000000 s21=00000000 d10=0000000000000000
s22=00000000 s23=00000000 d11=0000000000000000
s24=00000000 s25=00000000 d12=0000000000000000
s26=00000000 s27=00000000 d13=0000000000000000
s28=00000000 s29=00000000 d14=0000000000000000
s30=00000000 s31=00000000 d15=0000000000000000
s32=00000000 s33=00000000 d16=0000000000000000
s34=00000000 s35=00000000 d17=0000000000000000
s36=00000000 s37=00000000 d18=0000000000000000
s38=00000000 s39=00000000 d19=0000000000000000
s40=00000000 s41=00000000 d20=0000000000000000
s42=00000000 s43=00000000 d21=0000000000000000
s44=00000000 s45=00000000 d22=0000000000000000
s46=00000000 s47=00000000 d23=0000000000000000
s48=00000000 s49=00000000 d24=0000000000000000
s50=00000000 s51=00000000 d25=0000000000000000
s52=00000000 s53=00000000 d26=0000000000000000
s54=00000000 s55=00000000 d27=0000000000000000
s56=00000000 s57=00000000 d28=0000000000000000
s58=00000000 s59=00000000 d29=0000000000000000
s60=00000000 s61=00000000 d30=0000000000000000
s62=00000000 s63=00000000 d31=0000000000000000
FPSCR: 00000000
-------------------------------------------------------------------------------------------------
end of post
Original discussion at ( includes comments of head custodian of Das U-boot about u-boot working on physical board versatile express a9 and him having issues with runing Linux distro at qemu vexpress-a9 board emulation ):
https://stackoverflow.com/questions/37068688/have-you-got-issues-with-running-u-boot-for-versatile-express-a9-platform-under
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1579327/+subscriptions
next reply other threads:[~2016-05-07 8:15 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-07 8:08 embedded0n3 [this message]
2016-05-07 14:54 ` [Qemu-devel] [Bug 1579327] [NEW] emulation of vexpress-a9 vexpress-a15 in multicore mode seems to be broken Peter Maydell
2016-05-09 1:08 ` [Qemu-devel] [Bug 1579327] " embedded0n3
2016-05-09 1:11 ` embedded0n3
2016-05-09 1:18 ` embedded0n3
2016-05-09 9:31 ` Peter Maydell
2016-05-09 12:47 ` embedded0n3
2016-05-09 13:01 ` Peter Maydell
2016-05-09 13:12 ` embedded0n3
2016-05-09 13:20 ` embedded0n3
2016-10-27 11:51 ` Nicolae Rosia
2016-10-28 14:38 ` Nicolae Rosia
2019-04-24 6:14 ` Thomas Huth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160507080857.903.95152.malonedeb@chaenomeles.canonical.com \
--to=jainformatyka@interia.pl \
--cc=1579327@bugs.launchpad.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.