From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones To: linux-hwmon@vger.kernel.org Date: Mon, 09 May 2016 09:02:34 -0700 Subject: Re: [PATCH 03/11] mfd: altr_a10sr: Add Altera Arria10 DevKit System Resource Chip In-Reply-To: <1461339219-15255-1-git-send-email-tthayer@opensource.altera.com> Message-ID: <20160509160215.GF19473@dell> MIME-Version: 1.0 Content-Type: text/plain List-ID: On Fri, 22 Apr 2016, ttha...@opensource.altera.com wrote: > From: Thor Thayer > > Add support for the Altera Arria10 Development Kit System Resource > chip which is implemented using a MAX5 as a external gpio extender, > and power supply alarm (hwmon) with the regmap framework over a SPI bus. > > Signed-off-by: Thor Thayer > --- > drivers/mfd/Kconfig | 11 +++ > drivers/mfd/Makefile | 2 + > drivers/mfd/altera-a10sr.c | 179 > ++++++++++++++++++++++++++++++++++++++ > include/linux/mfd/altera-a10sr.h | 87 ++++++++++++++++++ > 4 files changed, 279 insertions(+) > create mode 100644 drivers/mfd/altera-a10sr.c > create mode 100644 include/linux/mfd/altera-a10sr.h > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index eea61e3..4fc27c6 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -18,6 +18,17 @@ config MFD_CS5535 > This is the core driver for CS5535/CS5536 MFD functions. This is > necessary for using the board's GPIO and MFGPT functionality. > > +config MFD_ALTERA_A10SR > + bool "Altera Arria10 DevKit System Resource chip" > + depends on ARCH_SOCFPGA && SPI_MASTER=y && OF > + select REGMAP_SPI > + select MFD_CORE > + help > + Support for the Altera Arria10 DevKit MAX5 System Resource chip > + using the SPI interface. This driver provides common support for > + accessing the external gpio extender (LEDs & buttons) and > + power supply alarms (hwmon). > + > config MFD_ACT8945A > tristate "Active-semi ACT8945A" > select MFD_CORE > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 5eaa6465d..4f1ff91 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -203,3 +203,5 @@ intel-soc-pmic-objs := > intel_soc_pmic_core.o intel_soc_pmic_crc.o > intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o > obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o > obj-$(CONFIG_MFD_MT6397) += mt6397-core.o > + > +obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o > diff --git a/drivers/mfd/altera-a10sr.c b/drivers/mfd/altera-a10sr.c > new file mode 100644 > index 0000000..2ff08e3 > --- /dev/null > +++ b/drivers/mfd/altera-a10sr.c > @@ -0,0 +1,179 @@ > +/* > + * Copyright Altera Corporation (C) 2014-2016. All Rights Reserved > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along > with > + * this program. If not, see . > + * > + * SPI access for Altera Arria10 MAX5 System Resource Chip > + * > + * Adapted from DA9052 > + * Copyright(c) 2011 Dialog Semiconductor Ltd. > + * Author: David Dajun Chen You don't need to carry the copyright or authorship tags over. > + */ > + > +#include > +#include > +#include > +#include > +#include > + > +static const struct mfd_cell altr_a10sr_subdev_info[] = { > + { > + .name = "altr_a10sr_gpio", > + .of_compatible = "altr,a10sr-gpio", > + }, > +}; > + > +static bool altr_a10sr_reg_readable(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case ALTR_A10SR_VERSION_READ: > + case ALTR_A10SR_LED_REG: > + case ALTR_A10SR_PBDSW_REG: > + case ALTR_A10SR_PBDSW_IRQ_REG: > + case ALTR_A10SR_PWR_GOOD1_REG: > + case ALTR_A10SR_PWR_GOOD2_REG: > + case ALTR_A10SR_PWR_GOOD3_REG: > + case ALTR_A10SR_FMCAB_REG: > + case ALTR_A10SR_HPS_RST_REG: > + case ALTR_A10SR_USB_QSPI_REG: > + case ALTR_A10SR_SFPA_REG: > + case ALTR_A10SR_SFPB_REG: > + case ALTR_A10SR_I2C_M_REG: > + case ALTR_A10SR_WARM_RST_REG: > + case ALTR_A10SR_WR_KEY_REG: > + case ALTR_A10SR_PMBUS_REG: > + return true; > + default: > + return false; > + } > +} > + > +static bool altr_a10sr_reg_writeable(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case ALTR_A10SR_LED_REG: > + case ALTR_A10SR_PBDSW_IRQ_REG: > + case ALTR_A10SR_FMCAB_REG: > + case ALTR_A10SR_HPS_RST_REG: > + case ALTR_A10SR_USB_QSPI_REG: > + case ALTR_A10SR_SFPA_REG: > + case ALTR_A10SR_SFPB_REG: > + case ALTR_A10SR_WARM_RST_REG: > + case ALTR_A10SR_WR_KEY_REG: > + case ALTR_A10SR_PMBUS_REG: > + return true; > + default: > + return false; > + } > +} > + > +static bool altr_a10sr_reg_volatile(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case ALTR_A10SR_PBDSW_REG: > + case ALTR_A10SR_PBDSW_IRQ_REG: > + case ALTR_A10SR_PWR_GOOD1_REG: > + case ALTR_A10SR_PWR_GOOD2_REG: > + case ALTR_A10SR_PWR_GOOD3_REG: > + case ALTR_A10SR_HPS_RST_REG: > + case ALTR_A10SR_I2C_M_REG: > + case ALTR_A10SR_WARM_RST_REG: > + case ALTR_A10SR_WR_KEY_REG: > + case ALTR_A10SR_PMBUS_REG: > + return true; > + default: > + return false; > + } > +} > + > +const struct regmap_config altr_a10sr_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + > + .cache_type = REGCACHE_NONE, > + > + .use_single_rw = true, > + .read_flag_mask = 1, > + .write_flag_mask = 0, > + > + .max_register = ALTR_A10SR_WR_KEY_REG, > + .readable_reg = altr_a10sr_reg_readable, > + .writeable_reg = altr_a10sr_reg_writeable, > + .volatile_reg = altr_a10sr_reg_volatile, > + > +}; > + > +static int altr_a10sr_spi_probe(struct spi_device *spi) > +{ > + int ret; > + struct altr_a10sr *a10sr; > + > + a10sr = devm_kzalloc(&spi->dev, sizeof(*a10sr), > + GFP_KERNEL); > + if (!a10sr) > + return -ENOMEM; > + > + spi->mode = SPI_MODE_3; > + spi->bits_per_word = 8; > + spi_setup(spi); > + > + a10sr->dev = &spi->dev; > + > + spi_set_drvdata(spi, a10sr); > + > + a10sr->regmap = devm_regmap_init_spi(spi, &altr_a10sr_regmap_config); > + if (IS_ERR(a10sr->regmap)) { > + ret = PTR_ERR(a10sr->regmap); > + dev_err(&spi->dev, "Failed to allocate register map: %d\n", > + ret); > + return ret; > + } Is this regmap used it more than one driver? > + ret = mfd_add_devices(a10sr->dev, PLATFORM_DEVID_AUTO, > + altr_a10sr_subdev_info, > + ARRAY_SIZE(altr_a10sr_subdev_info), > + NULL, 0, NULL); > + if (ret) > + dev_err(a10sr->dev, "Failed to register sub-devices: %d\n", > + ret); > + > + return ret; > +} > + > +static int altr_a10sr_spi_remove(struct spi_device *spi) > +{ > + mfd_remove_devices(&spi->dev); > + > + return 0; > +} Use devm_mfd_add_devices() and remove this function. > +static const struct of_device_id altr_a10sr_spi_of_match[] = { > + { .compatible = "altr,a10sr" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, altr_a10sr_spi_of_match); > + > +static struct spi_driver altr_a10sr_spi_driver = { > + .probe = altr_a10sr_spi_probe, > + .remove = altr_a10sr_spi_remove, Remove .remove. > + .driver = { > + .name = "altr_a10sr", > + .of_match_table = of_match_ptr(altr_a10sr_spi_of_match), > + }, > +}; > + > +module_spi_driver(altr_a10sr_spi_driver); > + > +MODULE_LICENSE("GPL v2"); > +MODULE_AUTHOR("Thor Thayer "); > +MODULE_DESCRIPTION("Altera Arria10 DevKit System Resource MFD Driver"); > diff --git a/include/linux/mfd/altera-a10sr.h > b/include/linux/mfd/altera-a10sr.h > new file mode 100644 > index 0000000..c869fe7 > --- /dev/null > +++ b/include/linux/mfd/altera-a10sr.h > @@ -0,0 +1,87 @@ > +/* > + * Copyright Altera Corporation (C) 2014-2016. All Rights Reserved > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along > with > + * this program. If not, see . > + * > + * Declarations for Altera Arria10 MAX5 System Resource Chip > + * > + * Adapted from DA9052 > + * Copyright(c) 2011 Dialog Semiconductor Ltd. > + * Author: David Dajun Chen Remove these two lines. > + */ > + > +#ifndef __MFD_ALTERA_A10SR_H > +#define __MFD_ALTERA_A10SR_H > + > +#include > +#include > +#include > +#include > +#include > + > +/* Write registers are always on even addresses */ > +#define WRITE_REG_MASK 0xFE > +/* Odd registers are always on odd addresses */ > +#define READ_REG_MASK 0x01 > + > +#define ALTR_A10SR_BITS_PER_REGISTER 8 > +/* > + * To find the correct register, we divide the input GPIO by > + * the number of GPIO in each register. We then need to multiply > + * by 2 because the reads are at odd addresses. > + */ > +#define ALTR_A10SR_REG_OFFSET(X) (((X) / ALTR_A10SR_BITS_PER_REGISTER) > << 1) > +#define ALTR_A10SR_REG_BIT(X) ((X) % ALTR_A10SR_BITS_PER_REGISTER) > +#define ALTR_A10SR_REG_BIT_CHG(X, Y) ((X) << ALTR_A10SR_REG_BIT(Y)) > +#define ALTR_A10SR_REG_BIT_MASK(X) (1 << ALTR_A10SR_REG_BIT(X)) > + > +/* Arria10 System Controller Register Defines */ > +#define ALTR_A10SR_NOP 0x00 /* No Change */ > +#define ALTR_A10SR_VERSION_READ 0x00 /* MAX5 Version Read */ > + > +#define ALTR_A10SR_LED_REG 0x02 /* LED - Upper 4 bits */ > +/* LED register Bit Definitions */ > +#define ALTR_A10SR_LED_VALID_SHIFT 4 /* LED - Upper 4 bits > valid */ > +#define ALTR_A10SR_OUT_VALID_RANGE_LO ALTR_A10SR_LED_VALID_SHIFT > +#define ALTR_A10SR_OUT_VALID_RANGE_HI 7 > + > +#define ALTR_A10SR_PBDSW_REG 0x04 /* PB & DIP SW - Input only */ > +#define ALTR_A10SR_PBDSW_IRQ_REG 0x06 /* PB & DIP SW Flag Clear */ > +/* Pushbutton & DIP Switch Bit Definitions */ > +#define ALTR_A10SR_IN_VALID_RANGE_LO 8 > +#define ALTR_A10SR_IN_VALID_RANGE_HI 15 > + > +#define ALTR_A10SR_PWR_GOOD1_REG 0x08 /* Power Good1 Read */ > +#define ALTR_A10SR_PWR_GOOD2_REG 0x0A /* Power Good2 Read */ > +#define ALTR_A10SR_PWR_GOOD3_REG 0x0C /* Power Good3 Read */ > +#define ALTR_A10SR_FMCAB_REG 0x0E /* FMCA/B & PCIe Pwr Enable */ > +#define ALTR_A10SR_HPS_RST_REG 0x10 /* HPS Reset */ > +#define ALTR_A10SR_USB_QSPI_REG 0x12 /* USB, BQSPI, FILE Reset */ > +#define ALTR_A10SR_SFPA_REG 0x14 /* SFPA Control Reg */ > +#define ALTR_A10SR_SFPB_REG 0x16 /* SFPB Control Reg */ > +#define ALTR_A10SR_I2C_M_REG 0x18 /* I2C Master Select */ > +#define ALTR_A10SR_WARM_RST_REG 0x1A /* HPS Warm Reset */ > +#define ALTR_A10SR_WR_KEY_REG 0x1C /* HPS Warm Reset Key */ > +#define ALTR_A10SR_PMBUS_REG 0x1E /* HPS PM Bus */ > + > +/** > + * struct altr_a10sr - Altera Max5 MFD device private data structure > + * @dev: : this device > + * @regmap: the regmap assigned to the parent device. > + */ > +struct altr_a10sr { > + struct device *dev; > + struct regmap *regmap; > +}; > + > +#endif /* __MFD_ALTERA_A10SR_H */ -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH 03/11] mfd: altr_a10sr: Add Altera Arria10 DevKit System Resource Chip Date: Mon, 9 May 2016 17:02:15 +0100 Message-ID: <20160509160215.GF19473@dell> References: <1461339219-15255-1-git-send-email-tthayer@opensource.altera.com> <1461339219-15255-4-git-send-email-tthayer@opensource.altera.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from mail-wm0-f46.google.com ([74.125.82.46]:36198 "EHLO mail-wm0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751430AbcEIQCF (ORCPT ); Mon, 9 May 2016 12:02:05 -0400 Received: by mail-wm0-f46.google.com with SMTP id n129so144180289wmn.1 for ; Mon, 09 May 2016 09:02:04 -0700 (PDT) Content-Disposition: inline In-Reply-To: <1461339219-15255-4-git-send-email-tthayer@opensource.altera.com> Sender: linux-gpio-owner@vger.kernel.org List-Id: linux-gpio@vger.kernel.org To: tthayer@opensource.altera.com Cc: linus.walleij@linaro.org, gnurou@gmail.com, jdelvare@suse.com, linux@roeck-us.net, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, dinguyen@opensource.altera.com, linux-gpio@vger.kernel.org, linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org On Fri, 22 Apr 2016, tthayer@opensource.altera.com wrote: > From: Thor Thayer >=20 > Add support for the Altera Arria10 Development Kit System Resource > chip which is implemented using a MAX5 as a external gpio extender, > and power supply alarm (hwmon) with the regmap framework over a SPI b= us. >=20 > Signed-off-by: Thor Thayer > --- > drivers/mfd/Kconfig | 11 +++ > drivers/mfd/Makefile | 2 + > drivers/mfd/altera-a10sr.c | 179 ++++++++++++++++++++++++++++= ++++++++++ > include/linux/mfd/altera-a10sr.h | 87 ++++++++++++++++++ > 4 files changed, 279 insertions(+) > create mode 100644 drivers/mfd/altera-a10sr.c > create mode 100644 include/linux/mfd/altera-a10sr.h >=20 > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index eea61e3..4fc27c6 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -18,6 +18,17 @@ config MFD_CS5535 > This is the core driver for CS5535/CS5536 MFD functions. This is > necessary for using the board's GPIO and MFGPT functionali= ty. > =20 > +config MFD_ALTERA_A10SR > + bool "Altera Arria10 DevKit System Resource chip" > + depends on ARCH_SOCFPGA && SPI_MASTER=3Dy && OF > + select REGMAP_SPI > + select MFD_CORE > + help > + Support for the Altera Arria10 DevKit MAX5 System Resource = chip > + using the SPI interface. This driver provides common suppor= t for > + accessing the external gpio extender (LEDs & buttons) and > + power supply alarms (hwmon). > + > config MFD_ACT8945A > tristate "Active-semi ACT8945A" > select MFD_CORE > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 5eaa6465d..4f1ff91 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -203,3 +203,5 @@ intel-soc-pmic-objs :=3D intel_soc_pmic_core.o i= ntel_soc_pmic_crc.o > intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) +=3D intel_soc_pmic_bxtwc.o > obj-$(CONFIG_INTEL_SOC_PMIC) +=3D intel-soc-pmic.o > obj-$(CONFIG_MFD_MT6397) +=3D mt6397-core.o > + > +obj-$(CONFIG_MFD_ALTERA_A10SR) +=3D altera-a10sr.o > diff --git a/drivers/mfd/altera-a10sr.c b/drivers/mfd/altera-a10sr.c > new file mode 100644 > index 0000000..2ff08e3 > --- /dev/null > +++ b/drivers/mfd/altera-a10sr.c > @@ -0,0 +1,179 @@ > +/* > + * Copyright Altera Corporation (C) 2014-2016. All Rights Reserved > + * > + * This program is free software; you can redistribute it and/or mod= ify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WI= THOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILIT= Y or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public Lic= ense for > + * more details. > + * > + * You should have received a copy of the GNU General Public License= along with > + * this program. If not, see . > + * > + * SPI access for Altera Arria10 MAX5 System Resource Chip > + * > + * Adapted from DA9052 > + * Copyright(c) 2011 Dialog Semiconductor Ltd. > + * Author: David Dajun Chen You don't need to carry the copyright or authorship tags over. > + */ > + > +#include > +#include > +#include > +#include > +#include > + > +static const struct mfd_cell altr_a10sr_subdev_info[] =3D { > + { > + .name =3D "altr_a10sr_gpio", > + .of_compatible =3D "altr,a10sr-gpio", > + }, > +}; > + > +static bool altr_a10sr_reg_readable(struct device *dev, unsigned int= reg) > +{ > + switch (reg) { > + case ALTR_A10SR_VERSION_READ: > + case ALTR_A10SR_LED_REG: > + case ALTR_A10SR_PBDSW_REG: > + case ALTR_A10SR_PBDSW_IRQ_REG: > + case ALTR_A10SR_PWR_GOOD1_REG: > + case ALTR_A10SR_PWR_GOOD2_REG: > + case ALTR_A10SR_PWR_GOOD3_REG: > + case ALTR_A10SR_FMCAB_REG: > + case ALTR_A10SR_HPS_RST_REG: > + case ALTR_A10SR_USB_QSPI_REG: > + case ALTR_A10SR_SFPA_REG: > + case ALTR_A10SR_SFPB_REG: > + case ALTR_A10SR_I2C_M_REG: > + case ALTR_A10SR_WARM_RST_REG: > + case ALTR_A10SR_WR_KEY_REG: > + case ALTR_A10SR_PMBUS_REG: > + return true; > + default: > + return false; > + } > +} > + > +static bool altr_a10sr_reg_writeable(struct device *dev, unsigned in= t reg) > +{ > + switch (reg) { > + case ALTR_A10SR_LED_REG: > + case ALTR_A10SR_PBDSW_IRQ_REG: > + case ALTR_A10SR_FMCAB_REG: > + case ALTR_A10SR_HPS_RST_REG: > + case ALTR_A10SR_USB_QSPI_REG: > + case ALTR_A10SR_SFPA_REG: > + case ALTR_A10SR_SFPB_REG: > + case ALTR_A10SR_WARM_RST_REG: > + case ALTR_A10SR_WR_KEY_REG: > + case ALTR_A10SR_PMBUS_REG: > + return true; > + default: > + return false; > + } > +} > + > +static bool altr_a10sr_reg_volatile(struct device *dev, unsigned int= reg) > +{ > + switch (reg) { > + case ALTR_A10SR_PBDSW_REG: > + case ALTR_A10SR_PBDSW_IRQ_REG: > + case ALTR_A10SR_PWR_GOOD1_REG: > + case ALTR_A10SR_PWR_GOOD2_REG: > + case ALTR_A10SR_PWR_GOOD3_REG: > + case ALTR_A10SR_HPS_RST_REG: > + case ALTR_A10SR_I2C_M_REG: > + case ALTR_A10SR_WARM_RST_REG: > + case ALTR_A10SR_WR_KEY_REG: > + case ALTR_A10SR_PMBUS_REG: > + return true; > + default: > + return false; > + } > +} > + > +const struct regmap_config altr_a10sr_regmap_config =3D { > + .reg_bits =3D 8, > + .val_bits =3D 8, > + > + .cache_type =3D REGCACHE_NONE, > + > + .use_single_rw =3D true, > + .read_flag_mask =3D 1, > + .write_flag_mask =3D 0, > + > + .max_register =3D ALTR_A10SR_WR_KEY_REG, > + .readable_reg =3D altr_a10sr_reg_readable, > + .writeable_reg =3D altr_a10sr_reg_writeable, > + .volatile_reg =3D altr_a10sr_reg_volatile, > + > +}; > + > +static int altr_a10sr_spi_probe(struct spi_device *spi) > +{ > + int ret; > + struct altr_a10sr *a10sr; > + > + a10sr =3D devm_kzalloc(&spi->dev, sizeof(*a10sr), > + GFP_KERNEL); > + if (!a10sr) > + return -ENOMEM; > + > + spi->mode =3D SPI_MODE_3; > + spi->bits_per_word =3D 8; > + spi_setup(spi); > + > + a10sr->dev =3D &spi->dev; > + > + spi_set_drvdata(spi, a10sr); > + > + a10sr->regmap =3D devm_regmap_init_spi(spi, &altr_a10sr_regmap_conf= ig); > + if (IS_ERR(a10sr->regmap)) { > + ret =3D PTR_ERR(a10sr->regmap); > + dev_err(&spi->dev, "Failed to allocate register map: %d\n", > + ret); > + return ret; > + } Is this regmap used it more than one driver? > + ret =3D mfd_add_devices(a10sr->dev, PLATFORM_DEVID_AUTO, > + altr_a10sr_subdev_info, > + ARRAY_SIZE(altr_a10sr_subdev_info), > + NULL, 0, NULL); > + if (ret) > + dev_err(a10sr->dev, "Failed to register sub-devices: %d\n", > + ret); > + > + return ret; > +} > + > +static int altr_a10sr_spi_remove(struct spi_device *spi) > +{ > + mfd_remove_devices(&spi->dev); > + > + return 0; > +} Use devm_mfd_add_devices() and remove this function. > +static const struct of_device_id altr_a10sr_spi_of_match[] =3D { > + { .compatible =3D "altr,a10sr" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, altr_a10sr_spi_of_match); > + > +static struct spi_driver altr_a10sr_spi_driver =3D { > + .probe =3D altr_a10sr_spi_probe, > + .remove =3D altr_a10sr_spi_remove, Remove .remove. > + .driver =3D { > + .name =3D "altr_a10sr", > + .of_match_table =3D of_match_ptr(altr_a10sr_spi_of_match), > + }, > +}; > + > +module_spi_driver(altr_a10sr_spi_driver); > + > +MODULE_LICENSE("GPL v2"); > +MODULE_AUTHOR("Thor Thayer "); > +MODULE_DESCRIPTION("Altera Arria10 DevKit System Resource MFD Driver= "); > diff --git a/include/linux/mfd/altera-a10sr.h b/include/linux/mfd/alt= era-a10sr.h > new file mode 100644 > index 0000000..c869fe7 > --- /dev/null > +++ b/include/linux/mfd/altera-a10sr.h > @@ -0,0 +1,87 @@ > +/* > + * Copyright Altera Corporation (C) 2014-2016. All Rights Reserved > + * > + * This program is free software; you can redistribute it and/or mod= ify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WI= THOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILIT= Y or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public Lic= ense for > + * more details. > + * > + * You should have received a copy of the GNU General Public License= along with > + * this program. If not, see . > + * > + * Declarations for Altera Arria10 MAX5 System Resource Chip > + * > + * Adapted from DA9052 > + * Copyright(c) 2011 Dialog Semiconductor Ltd. > + * Author: David Dajun Chen Remove these two lines. > + */ > + > +#ifndef __MFD_ALTERA_A10SR_H > +#define __MFD_ALTERA_A10SR_H > + > +#include > +#include > +#include > +#include > +#include > + > +/* Write registers are always on even addresses */ > +#define WRITE_REG_MASK 0xFE > +/* Odd registers are always on odd addresses */ > +#define READ_REG_MASK 0x01 > + > +#define ALTR_A10SR_BITS_PER_REGISTER 8 > +/* > + * To find the correct register, we divide the input GPIO by > + * the number of GPIO in each register. We then need to multiply > + * by 2 because the reads are at odd addresses. > + */ > +#define ALTR_A10SR_REG_OFFSET(X) (((X) / ALTR_A10SR_BITS_PER_REG= ISTER) << 1) > +#define ALTR_A10SR_REG_BIT(X) ((X) % ALTR_A10SR_BITS_PER_REGI= STER) > +#define ALTR_A10SR_REG_BIT_CHG(X, Y) ((X) << ALTR_A10SR_REG_BIT(Y)) > +#define ALTR_A10SR_REG_BIT_MASK(X) (1 << ALTR_A10SR_REG_BIT(X)) > + > +/* Arria10 System Controller Register Defines */ > +#define ALTR_A10SR_NOP 0x00 /* No Change */ > +#define ALTR_A10SR_VERSION_READ 0x00 /* MAX5 Version Read *= / > + > +#define ALTR_A10SR_LED_REG 0x02 /* LED - Upper 4 bits = */ > +/* LED register Bit Definitions */ > +#define ALTR_A10SR_LED_VALID_SHIFT 4 /* LED - Upper 4 b= its valid */ > +#define ALTR_A10SR_OUT_VALID_RANGE_LO ALTR_A10SR_LED_VALID_SHIFT > +#define ALTR_A10SR_OUT_VALID_RANGE_HI 7 > + > +#define ALTR_A10SR_PBDSW_REG 0x04 /* PB & DIP SW - Input= only */ > +#define ALTR_A10SR_PBDSW_IRQ_REG 0x06 /* PB & DIP SW Flag Cl= ear */ > +/* Pushbutton & DIP Switch Bit Definitions */ > +#define ALTR_A10SR_IN_VALID_RANGE_LO 8 > +#define ALTR_A10SR_IN_VALID_RANGE_HI 15 > + > +#define ALTR_A10SR_PWR_GOOD1_REG 0x08 /* Power Good1 Read */ > +#define ALTR_A10SR_PWR_GOOD2_REG 0x0A /* Power Good2 Read */ > +#define ALTR_A10SR_PWR_GOOD3_REG 0x0C /* Power Good3 Read */ > +#define ALTR_A10SR_FMCAB_REG 0x0E /* FMCA/B & PCIe Pwr E= nable */ > +#define ALTR_A10SR_HPS_RST_REG 0x10 /* HPS Reset */ > +#define ALTR_A10SR_USB_QSPI_REG 0x12 /* USB, BQSPI, FILE Re= set */ > +#define ALTR_A10SR_SFPA_REG 0x14 /* SFPA Control Reg */ > +#define ALTR_A10SR_SFPB_REG 0x16 /* SFPB Control Reg */ > +#define ALTR_A10SR_I2C_M_REG 0x18 /* I2C Master Select *= / > +#define ALTR_A10SR_WARM_RST_REG 0x1A /* HPS Warm Reset */ > +#define ALTR_A10SR_WR_KEY_REG 0x1C /* HPS Warm Reset Key = */ > +#define ALTR_A10SR_PMBUS_REG 0x1E /* HPS PM Bus */ > + > +/** > + * struct altr_a10sr - Altera Max5 MFD device private data structure > + * @dev: : this device > + * @regmap: the regmap assigned to the parent device. > + */ > +struct altr_a10sr { > + struct device *dev; > + struct regmap *regmap; > +}; > + > +#endif /* __MFD_ALTERA_A10SR_H */ --=20 Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org =E2=94=82 Open source software for ARM SoCs =46ollow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html