[Qemu-devel] [Bug 1588328] [NEW] Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Qemu-devel] [Bug 1588328] [NEW] Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Zhen Ning Lim]

Public bug reported:

Hi,
I tried the following command to boot Solaris 9 sparc:
qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

It seems there are a few Segmentation Faults, one from the starting of
the boot. Another at the beginning of the commandline installation.

Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Configuration device id QEMU version 1 machine id 32
Probing SBus slot 0 offset 0
Probing SBus slot 1 offset 0
Probing SBus slot 2 offset 0
Probing SBus slot 3 offset 0
Probing SBus slot 4 offset 0
Probing SBus slot 5 offset 0
Invalid FCode start byte
CPUs: 1 x FMI,MB86904
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
  Type 'help' for detailed information
Trying cdrom:d...
Not a bootable ELF image
Loading a.out image...
Loaded 7680 bytes
entry point is 0x4000
bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

Jumping to entry point 00004000 for type 00000005...
switching to new context:
SunOS Release 5.9 Version Generic_118558-34 32-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
	Corrupt label; wrong magic number

Segmentation Fault
Configuring /dev and /devices
NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
audio may not work correctly until it is stopped and restarted
Segmentation Fault
Using RPC Bootparams for network configuration information.
Skipping interface le0
Searching for configuration file(s)...
Search complete.

....

What type of terminal are you using?
 1) ANSI Standard CRT
 2) DEC VT52
 3) DEC VT100
 4) Heathkit 19
 5) Lear Siegler ADM31
 6) PC Console
 7) Sun Command Tool
 8) Sun Workstation
 9) Televideo 910
 10) Televideo 925
 11) Wyse Model 50
 12) X Terminal Emulator (xterms)
 13) CDE Terminal Emulator (dtterm)
 14) Other
Type the number of your choice and press Return: 3
syslog service starting.
savecore: no dump device configured
Running in command line mode
/sbin/disk0_install[109]: 143 Segmentation Fault
/sbin/run_install[130]: 155 Segmentation Fault

** Affects: qemu
     Importance: Undecided
         Status: New

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Mark Cave-Ayland]

That basically looks like it should work. The only time I've seen random
segfaults similar to this is with a corrupted disk, so the first
question to ask is whether you've verified the ISO image you are using?
Unfortunately this isn't an image I currently have access to, but I can
report my Solaris 8 32-bit ISO boots and installs fine with no issues
here. Does it make any difference if you remove the -hda part of the
command line?

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Zhen Ning Lim]

Hi Mark,

I compared the cksum provided and the dvd cksum that i did, seems to
match. I did try out Solaris 8 too. It seems to work fine with sun
formatted hda disk. I did try removing the -hda for solaris 9, the
problem still persist. I shall find if i can get another solaris 9 image
source to try out.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Mark Cave-Ayland]

If you can verify that the media is correct and you still see problems,
I'd be interested to take a look if you are able to provide me a copy of
the media for debugging.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Zhen Ning Lim]

Hi Mark,

I have uploaded a copy of it to mega.nz

https://mega.nz/#!94ZVXBra

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Zhen Ning Lim]

Hi Mark,

Attached is the new link:
https://mega.nz/#!94ZVXBra!8QMsQ2d9eKKkMuawg_0YelfyWTy47CyyD1f6tvSv1bQ

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Mark Cave-Ayland]

Thanks for the test case. It appears that this is a regression that
occurred somewhere between 2.5 and 2.6 - bisecting now.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

Re: [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Artyom Tarasenko]

Can you guys check if the problem persists when qemu is launched with
the -singlestep option?
I think it's in general a good idea always check TCG-related problems
with -singlestep , because it helps to find out whether a bug is in
the optimizer or generator module of TCG.

Artyom

On Tue, Jun 14, 2016 at 11:44 PM, Mark Cave-Ayland
<mark.cave-ayland@ilande.co.uk> wrote:
> Thanks for the test case. It appears that this is a regression that
> occurred somewhere between 2.5 and 2.6 - bisecting now.
>
> --
> You received this bug notification because you are a member of qemu-
> devel-ml, which is subscribed to QEMU.
> https://bugs.launchpad.net/bugs/1588328
>
> Title:
>   Qemu 2.6 Solaris 9 Sparc Segmentation Fault
>
> Status in QEMU:
>   New
>
> Bug description:
>   Hi,
>   I tried the following command to boot Solaris 9 sparc:
>   qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server
>
>   It seems there are a few Segmentation Faults, one from the starting of
>   the boot. Another at the beginning of the commandline installation.
>
>   Trying 127.0.0.1...
>   Connected to localhost.
>   Escape character is '^]'.
>   Configuration device id QEMU version 1 machine id 32
>   Probing SBus slot 0 offset 0
>   Probing SBus slot 1 offset 0
>   Probing SBus slot 2 offset 0
>   Probing SBus slot 3 offset 0
>   Probing SBus slot 4 offset 0
>   Probing SBus slot 5 offset 0
>   Invalid FCode start byte
>   CPUs: 1 x FMI,MB86904
>   UUID: 00000000-0000-0000-0000-000000000000
>   Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
>     Type 'help' for detailed information
>   Trying cdrom:d...
>   Not a bootable ELF image
>   Loading a.out image...
>   Loaded 7680 bytes
>   entry point is 0x4000
>   bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d
>
>   Jumping to entry point 00004000 for type 00000005...
>   switching to new context:
>   SunOS Release 5.9 Version Generic_118558-34 32-bit
>   Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
>   Use is subject to license terms.
>   WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
>         Corrupt label; wrong magic number
>
>   Segmentation Fault
>   Configuring /dev and /devices
>   NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
>   audio may not work correctly until it is stopped and restarted
>   Segmentation Fault
>   Using RPC Bootparams for network configuration information.
>   Skipping interface le0
>   Searching for configuration file(s)...
>   Search complete.
>
>   ....
>
>   What type of terminal are you using?
>    1) ANSI Standard CRT
>    2) DEC VT52
>    3) DEC VT100
>    4) Heathkit 19
>    5) Lear Siegler ADM31
>    6) PC Console
>    7) Sun Command Tool
>    8) Sun Workstation
>    9) Televideo 910
>    10) Televideo 925
>    11) Wyse Model 50
>    12) X Terminal Emulator (xterms)
>    13) CDE Terminal Emulator (dtterm)
>    14) Other
>   Type the number of your choice and press Return: 3
>   syslog service starting.
>   savecore: no dump device configured
>   Running in command line mode
>   /sbin/disk0_install[109]: 143 Segmentation Fault
>   /sbin/run_install[130]: 155 Segmentation Fault
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions
>



-- 
Regards,
Artyom Tarasenko

SPARC and PPC PReP under qemu blog: http://tyom.blogspot.com/search/label/qemu

Re: [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Mark Cave-Ayland]

On 17/06/16 12:42, Artyom Tarasenko wrote:

> Can you guys check if the problem persists when qemu is launched with
> the -singlestep option?
> I think it's in general a good idea always check TCG-related problems
> with -singlestep , because it helps to find out whether a bug is in
> the optimizer or generator module of TCG.
> 
> Artyom

Hi Artyom,

I did manage to bisect this down to a single commit in the end: see
http://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg04039.html
for the commit in question.


ATB,

Mark.

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Mark Cave-Ayland]

Artyom has located the regression and posted a patch here:
https://lists.gnu.org/archive/html/qemu-devel/2016-06/msg07226.html.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Zhen Ning Lim]

Hi all,

Thanks for the patch. I just tried, it seems to be not able to find the
disk when it try to start the installation. :(

...

Please specify the media from which you will install the Solaris Operating
Environment.

Media:

1. CD/DVD
2. Network File System
3. HTTP (Flash archive only)
4. FTP (Flash archive only)
5. Local Tape (Flash archive only)

   Media [1]: 1
Reading disc for Solaris Operating Environment...

The system is being initialized, please wait... /
No Disks found. 
Check to make sure disks are cabled and powered up.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Mark Cave-Ayland]

I ran all the way through the installer in order to test the patch, so
it should be working for you. Is your Spark9.disk labelled? See
http://virtuallyfun.superglobalmegacorp.com/2010/10/03/formatting-disks-
for-solaris/ for more information on how to do this.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Zhen Ning Lim]

Hmm.. strange. I did make a new disk went into the setup, then format
the disk. After that, i rebooted and start that installation. But, it
seems still there is no disk detected.

 Media [1]: 1
Reading disc for Solaris Operating Environment...

The system is being initialized, please wait... |
No Disks found. 
Check to make sure disks are cabled and powered up. 

 Press OK to Exit.

   <Press ENTER to continue/

-# format -e
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <drive type unknown>
          /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0
Specify disk (enter its number): 0


AVAILABLE DRIVE TYPES:
        0. Auto configure
        1. Quantum ProDrive 80S
        2. Quantum ProDrive 105S
        3. CDC Wren IV 94171-344
        4. SUN0104
        5. SUN0207
        6. SUN0327
        7. SUN0340
        8. SUN0424
        9. SUN0535
        10. SUN0669
        11. SUN1.0G
        12. SUN1.05
        13. SUN1.3G
        14. SUN2.1G
        15. SUN2.9G
        16. Zip 100
        17. Zip 250
        18. other
Specify disk type (enter its number): 18
Enter number of data cylinders: 24620
Enter number of alternate cylinders[2]: 
Enter number of physical cylinders[24622]: 
Enter number of heads: 27
Enter physical number of heads[default]: 107
Enter number of data sectors/track: 107
Enter number of physical sectors/track[default]: 
Enter rpm of drive[3600]: 
Enter format time[default]: 
Enter cylinder skew[default]: 
Enter track skew[default]: 
Enter tracks per zone[default]: 
Enter alternate tracks[default]: 
Enter alternate sectors[default]: 
Enter cache control[default]: 
Enter prefetch threshold[default]: 
Enter minimum prefetch[default]: 
Enter maximum prefetch[default]: 
Enter disk type name (remember quotes): Sparc9
selecting c0t0d0
[disk formatted]


FORMAT MENU:
        disk       - select a disk
        type       - select (define) a disk type
        partition  - select (define) a partition table
        current    - describe the current disk
        format     - format and analyze the disk
        repair     - repair a defective sector
        label      - write label to the disk
        analyze    - surface analysis
        defect     - defect list management
        backup     - search for backup labels
        verify     - read and display labels
        save       - save new disk/partition definitions
        inquiry    - show vendor, product and revision
        scsi       - independent SCSI mode selects
        cache      - enable, disable or query SCSI disk cache
        volname    - set 8-character volume name
        !<cmd>     - execute <cmd>, then return
        quit
format> label
[0] SMI Label
[1] EFI Label
Specify Label type[0]: 1
Ready to label disk, continue?y

format> q

#reboot
Jun 28 23:37:16 rpcbind: rpcbind terminating on signal.
syncing file systems... done
rebooting...
rebooting ()
Configuration device id QEMU version 1 machine id 32
Probing SBus slot 0 offset 0
Probing SBus slot 1 offset 0
Probing SBus slot 2 offset 0
Probing SBus slot 3 offset 0
Probing SBus slot 4 offset 0
Probing SBus slot 5 offset 0
Invalid FCode start byte
CPUs: 1 x FMI,MB86904
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
  Type 'help' for detailed information
Trying cdrom:d...
Not a bootable ELF image
Loading a.out image...
Loaded 7680 bytes
entry point is 0x4000
bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

Jumping to entry point 00004000 for type 00000005...
switching to new context:
SunOS Release 5.9 Version Generic_118558-34 32-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Configuring /dev and /devices
NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
audio may not work correctly until it is stopped and restarted

Please specify the media from which you will install the Solaris Operating
Environment.

Media:

1. CD/DVD
2. Network File System
3. HTTP (Flash archive only)
4. FTP (Flash archive only)
5. Local Tape (Flash archive only)

   Media [1]: 1
Reading disc for Solaris Operating Environment...

The system is being initialized, please wait... -^[[6|^R
^[[/
No Disks found. 
Check to make sure disks are cabled and powered up. 

 Press OK to Exit.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Mark Cave-Ayland]

Okay. Can you confirm which version (or git revision) you've used to
apply the patch so I can try and reproduce locally?

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Zhen Ning Lim]

May 11 2016. qemu-2.6.0 from http://wiki.qemu.org/Download

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Mark Cave-Ayland]

I've just tried v2.6.0 with the recent ldstub patch applied and it looks
from the output above that you're using an incorrect format to put down
the disk label. I see the following:

$ ./qemu-system-sparc -cdrom sol-9-905hw-ga-sparc-dvd.iso -hda /home/build/src/qemu/image/sparc32/sol9.qcow2 -boot d -nographic -prom-env 'auto-boot?=false'
Configuration device id QEMU version 1 machine id 32
Probing SBus slot 0 offset 0
Probing SBus slot 1 offset 0
Probing SBus slot 2 offset 0
Probing SBus slot 3 offset 0
Probing SBus slot 4 offset 0
Probing SBus slot 5 offset 0
Invalid FCode start byte
CPUs: 1 x FMI,MB86904
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
  Type 'help' for detailed information

0 > boot cdrom:d -vs Not a bootable ELF image
Loading a.out image...
Loaded 7680 bytes
entry point is 0x4000
bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

Jumping to entry point 00004000 for type 00000005...
switching to new context:
Size: 0x4624f+0xdaf5+0x1d6a3 Bytes
SunOS Release 5.9 Version Generic_118558-34 32-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
...
...
INIT: SINGLE USER MODE
# format
Searching for disks...WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
        Corrupt label; wrong magic number

WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
        Corrupt label; wrong magic number

done


AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <drive type unknown>
          /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0
Specify disk (enter its number): 0


AVAILABLE DRIVE TYPES:
        0. Auto configure
        1. Quantum ProDrive 80S
        2. Quantum ProDrive 105S
        3. CDC Wren IV 94171-344
        4. SUN0104
        5. SUN0207
        6. SUN0327
        7. SUN0340
        8. SUN0424
        9. SUN0535
        10. SUN0669
        11. SUN1.0G
        12. SUN1.05
        13. SUN1.3G
        14. SUN2.1G
        15. SUN2.9G
        16. Zip 100
        17. Zip 250
        18. other
Specify disk type (enter its number): 18
Enter number of data cylinders: 24620
Enter number of alternate cylinders[2]: 
Enter number of physical cylinders[24622]: 
Enter number of heads: 27
Enter physical number of heads[default]: 
Enter number of data sectors/track: 107
Enter number of physical sectors/track[default]: 107
Enter rpm of drive[3600]: 
Enter format time[default]: 
Enter cylinder skew[default]: 
Enter track skew[default]: 
Enter tracks per zone[default]: 
Enter alternate tracks[default]: 
Enter alternate sectors[default]: 
Enter cache control[default]: 
Enter prefetch threshold[default]: 
Enter minimum prefetch[default]: 
Enter maximum prefetch[default]: 
Enter disk type name (remember quotes): Sparc9
selecting c0t0d0
[disk formatted]


FORMAT MENU:
        disk       - select a disk
        type       - select (define) a disk type
        partition  - select (define) a partition table
        current    - describe the current disk
        format     - format and analyze the disk
        repair     - repair a defective sector
        label      - write label to the disk
        analyze    - surface analysis
        defect     - defect list management
        backup     - search for backup labels
        verify     - read and display labels
        save       - save new disk/partition definitions
        inquiry    - show vendor, product and revision
        volname    - set 8-character volume name
        !<cmd>     - execute <cmd>, then return
        quit
format> label
Ready to label disk, continue? y

WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
        Corrupt label; wrong magic number

format> label
Ready to label disk, continue? y

format> q

And then after the reboot:

$ ./qemu-system-sparc -cdrom sol-9-905hw-ga-sparc-dvd.iso -hda /home/build/src/qemu/image/sparc32/sol9.qcow2 -boot d -nographic
Configuration device id QEMU version 1 machine id 32
Probing SBus slot 0 offset 0
Probing SBus slot 1 offset 0
Probing SBus slot 2 offset 0
Probing SBus slot 3 offset 0
Probing SBus slot 4 offset 0
Probing SBus slot 5 offset 0
Invalid FCode start byte
CPUs: 1 x FMI,MB86904
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
  Type 'help' for detailed information
Trying cdrom:d...
Not a bootable ELF image
Loading a.out image...
Loaded 7680 bytes
entry point is 0x4000
bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

Jumping to entry point 00004000 for type 00000005...
switching to new context:
SunOS Release 5.9 Version Generic_118558-34 32-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Configuring /dev and /devices
NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
audio may not work correctly until it is stopped and restarted
Using RPC Bootparams for network configuration information.
Skipping interface le0
Searching for configuration file(s)...
Search complete.

Select a Language

   0. English
   1. French
   2. German
   3. Italian
   4. Japanese
   5. Korean
   6. Simplified Chinese
   7. Spanish
   8. Swedish
   9. Traditional Chinese

Please make a choice (0 - 9), or press h or ? for help: 0

Select a Locale

   0. English (C - 7-bit ASCII)
   1. Albania (ISO8859-2)
   2. Australia (ISO8859-1)
   3. Belgium-Flemish (ISO8859-1)
   4. Belgium-Flemish (ISO8859-15 - Euro)
   5. Bosnia (ISO8859-2)
   6. Brazil (ISO8859-1)
   7. Brazil (UTF-8)
   8. Bulgaria (ISO8859-5)
   9. Canada-English (ISO8859-1)
  10. Catalan, Spain (ISO8859-1)
  11. Catalan, Spain (ISO8859-15 - Euro)
  12. Croatia (ISO8859-2)
  13. Czech Republic (ISO8859-2)
  14. Denmark (ISO8859-1)
  15. Denmark (ISO8859-15 - Euro)
  16. Egypt (ISO8859-6)
  17. Egypt (UTF-8)
  18. Estonia (ISO8859-15)

Press Return to show more choices.
Please make a choice (0 - 59), or press h or ? for help: 0

What type of terminal are you using?
 1) ANSI Standard CRT
 2) DEC VT52
 3) DEC VT100
 4) Heathkit 19
 5) Lear Siegler ADM31
 6) PC Console
 7) Sun Command Tool
 8) Sun Workstation
 9) Televideo 910
 10) Televideo 925
 11) Wyse Model 50
 12) X Terminal Emulator (xterms)
 13) CDE Terminal Emulator (dtterm)
 14) Other
Type the number of your choice and press Return: 3
syslog service starting.
savecore: no dump device configured
Running in command line mode

Please wait while the system information is loaded... |

...
...

Please wait while the system is configured with your settings...

Scanning system disk information...

Searching disks for upgradable Solaris root devices...
No Upgradable Solaris root devices were found.


Searching for locations to accommodate a temporary copy of the Solaris
installation software.  Swap slices are usually erased at reboot, so it is
preferable to place the Solaris installation software on slice labeled swap.

No swap slices that begin at the first usable cylinder have enough space
to accommodate a temporary copy of the Solaris installation software.

Using a slice that begins at the first usable cylinder allows the most
flexibility during filesystem layout. If you are doing an initial install and
you are not preserving any filesystems, you can re-partition a disk with the
swap slice starting at the first usable cylinder.

Would you like to re-partition a disk? [y,n,?,q] y

The default root disk is /dev/dsk/c0t0d0.
The selected disk will be re-partitioned before the Solaris installation
software is copied to the disk.

WARNING: ALL INFORMATION ON THE DISK WILL BE ERASED!


Do you want to re-partition /dev/dsk/c0t0d0 [y,n,?,q] y

NOTE: The swap size cannot be changed during file system layout.


Enter a swap slice size between 158MB and 34729MB, default = 512MB [?] 

Placing the swap slice at the beginning of the disk will allow the most
flexible file system partitioning later in the installation.

Can the swap slice start at the beginning of the disk  [y,n,?,q] y
Confirm Information:

        Disk Slice  : /dev/dsk/c0t0d0s1
        Size        : 512 MB
        Start Cyl.  : 0

WARNING: ALL INFORMATION ON THE DISK WILL BE ERASED!


Is this OK  [y,n,?,q] y

etc.

Please specify the media from which you will install the Solaris Operating
Environment.

Media:

1. CD/DVD
2. Network File System
3. HTTP (Flash archive only)
4. FTP (Flash archive only)
5. Local Tape (Flash archive only)

   Media [1]: 
Reading disc for Solaris Operating Environment...

The system is being initialized, please wait... /

Sun Microsystems, Inc.
Binary Code License Agreement

etc.

Comparing your output with mine I can see two obvious differences:

1) You are using a different version of Solaris to label the disk in a
way that can't be understood by Solaris 9

2) You've mistyped the "Physical number of heads" as 27 rather than
accepting the default


ATB,

Mark.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Zhen Ning Lim]

Hi Mark,

Thanks a lot. Got it working now. When formatting the label, there are 2
options, SMI and EFI. Once I format it with SMI, it seems to be able to
find the disk.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Mark Cave-Ayland]

Great news! FWIW with newer versions of QEMU, including 2.6.0, the
framebuffer emulation is good enough to install and run Solaris
(including X) without the -nographic/-serial options if you need it.
I've also CCd the relevant patch to qemu-stable so it should appear in
2.6.1 also.

Many thanks for the report!


** Changed in: qemu
       Status: New => Fix Committed

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  Fix Committed

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Zhen Ning Lim]

** Changed in: qemu
       Status: Fix Committed => Fix Released

** Changed in: qemu
       Status: Fix Released => New

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  New

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Zhen Ning Lim]

** Changed in: qemu
       Status: New => Fix Committed

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  Fix Committed

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Zhen Ning Lim]

Hi Mark,

Thanks for the update. I would definitely be nice to have other than the
black screen. Still got a problem though. I managed to install sparc9
but after i removed the cdrom, it fails to boot.

qemu-system-sparc -nographic -monitor null -serial
mon:telnet:0.0.0.0:3000,server -hda ./Sparc9.disk -m 256 -net
nic,macaddr=52:54:0:12:34:56 -net
tap,ifname=tap0,script=no,downscript=no

>From an article written by Artyom, i did add

# cat >> /a/etc/system

set scsi_options=0x58

^d

to solaris 2.6.

However, i think i didnt do this with solaris 8, it works fine.

For the solaris 9, it will allow you to either set it to not reboot but
once you reached the end of the installation, it will reboot when you
press enter. And the Sparc9.disk cannot be booted :(


telnet 0.0.0.0 3000
Trying 0.0.0.0...
Connected to 0.0.0.0.
Escape character is '^]'.
Configuration device id QEMU version 1 machine id 32
Probing SBus slot 0 offset 0
Probing SBus slot 1 offset 0
Probing SBus slot 2 offset 0
Probing SBus slot 3 offset 0
Probing SBus slot 4 offset 0
Probing SBus slot 5 offset 0
Invalid FCode start byte
CPUs: 1 x FMI,MB86904
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
  Type 'help' for detailed information
Trying disk...
Not a bootable ELF image
Not a bootable a.out image
No valid state has been set by load or init-program

0 >

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  Fix Committed

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Mark Cave-Ayland]

If you use OpenBIOS then you don't explicitly have to set scsi-options
since the value can be overridden via the device tree which is exactly
what OpenBIOS does.

Interestingly enough it seems that the default bootloader for Solaris 9
is installed in the slice rather than the root of the disk as per my
Solaris 8 installation. Fortunately you can manually boot Solaris 9 from
the slice by entering "boot disk:d" at the Forth prompt.

Based upon this it probably makes sense to add "disk:d" to the bootpath
used by OpenBIOS - I'll send a patch through to the OpenBIOS mailing
list shortly.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  Fix Committed

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Zhen Ning Lim]

Hi Mark,

I have tried boot diisk:d. After this

Not a bootable ELF image
Not a bootable a.out image
No valid state has been set by load or init-program

0 > boot disk:d No valid state has been set by load or init-program
 ok
0 > 


Somehow I am getting invalid boot

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  Fix Committed

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Mark Cave-Ayland]

It works here as per my post above, so I think the problem is still with
the disk label. With the above ISO image, I don't get asked for the type
of label which makes me think you are using a newer version of Solaris
for labelling than you are for installation.

Can you re-label the disk using the exact same image used for the
installation and see if that makes a difference?

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  Fix Committed

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Mark Cave-Ayland]

Hmmm I've just tried a second installation of Solaris 9 with a
completely blank disk image and now it appears that "boot disk:a" is
correct, i.e. boot from slice a. Not sure yet if this is the correct
convention for HDs.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  Fix Committed

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Zhen Ning Lim]

Hi Mark,

We are finally in:)

By the way, how do you figure out which slice its in?

>From solaris 8 dvd onwards, i seems to see 2 disk label options: SMI and
EFI. Not sure why you didnt see those.

0 > boot disk:a Not a bootable ELF image
Loading a.out image...
Loaded 7680 bytes
entry point is 0x4000
bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0:a

Jumping to entry point 00004000 for type 00000005...
switching to new context:
SunOS Release 5.9 Version Generic_118558-34 32-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
configuring IPv4 interfaces: le0.
starting DHCP on primary interface le0
Hostname: unknown
The system is coming up.  Please wait.
checking ufs filesystems
/dev/rdsk/c0t0d0s7: is logging.
starting rpc services: rpcbind done.
syslog service starting.
syslogd: line 24: WARNING: loghost could not be resolved
Jul  3 14:06:40 unknown sendmail[239]: My unqualified host name (unknown) unknown; sleeping for retry
Jul  3 14:06:40 unknown sendmail[240]: My unqualified host name (unknown) unknown; sleeping for retry
volume management starting.
Creating new rsa public/private host key pair
Creating new dsa public/private host key pair
Jul  3 14:06:54 unknown snmpXdmid: Error in Adding Row for Subscription Table Entry
Jul  3 14:06:55 unknown snmpXdmid: Failed to add filter to SP for Event delivery
The system is ready.

unknown console login: root
Password: 
Jul  3 14:07:09 unknown login: ROOT LOGIN /dev/console
Sun Microsystems Inc.   SunOS 5.9       Generic May 2002
# ls
bin         etc         lib         opt         tmp         xfn
cdrom       export      lost+found  platform    usr
dev         home        mnt         proc        var
devices     kernel      net         sbin        vol
# Jul  3 14:07:41 unknown sendmail[240]: unable to qualify my own domain name (unknown) -- using short name
Jul  3 14:07:41 unknown sendmail[240]: [ID 702911 mail.alert] unable to qualify my own domain name (unknown) -- using short name
Jul  3 14:07:46 unknown sendmail[239]: unable to qualify my own domain name (unknown) -- using short name
Jul  3 14:07:46 unknown sendmail[239]: [ID 702911 mail.alert] unable to qualify my own domain name (unknown) -- using short name

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  Fix Committed

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Mark Cave-Ayland]

Great news! AFAICT it's just convention that the first disk slice is
used, and I've also proposed a patch for OpenBIOS to include this in the
boot search path in future, hopefully in time for 2.7.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  Fix Committed

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions

[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault

[Thomas Huth]

** Changed in: qemu
       Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328

Title:
  Qemu 2.6 Solaris 9 Sparc Segmentation Fault

Status in QEMU:
  Fix Released

Bug description:
  Hi,
  I tried the following command to boot Solaris 9 sparc:
  qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server 

  It seems there are a few Segmentation Faults, one from the starting of
  the boot. Another at the beginning of the commandline installation.

  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Configuration device id QEMU version 1 machine id 32
  Probing SBus slot 0 offset 0
  Probing SBus slot 1 offset 0
  Probing SBus slot 2 offset 0
  Probing SBus slot 3 offset 0
  Probing SBus slot 4 offset 0
  Probing SBus slot 5 offset 0
  Invalid FCode start byte
  CPUs: 1 x FMI,MB86904
  UUID: 00000000-0000-0000-0000-000000000000
  Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
    Type 'help' for detailed information
  Trying cdrom:d...
  Not a bootable ELF image
  Loading a.out image...
  Loaded 7680 bytes
  entry point is 0x4000
  bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d

  Jumping to entry point 00004000 for type 00000005...
  switching to new context:
  SunOS Release 5.9 Version Generic_118558-34 32-bit
  Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
  Use is subject to license terms.
  WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
  	Corrupt label; wrong magic number

  Segmentation Fault
  Configuring /dev and /devices
  NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
  audio may not work correctly until it is stopped and restarted
  Segmentation Fault
  Using RPC Bootparams for network configuration information.
  Skipping interface le0
  Searching for configuration file(s)...
  Search complete.

  ....

  What type of terminal are you using?
   1) ANSI Standard CRT
   2) DEC VT52
   3) DEC VT100
   4) Heathkit 19
   5) Lear Siegler ADM31
   6) PC Console
   7) Sun Command Tool
   8) Sun Workstation
   9) Televideo 910
   10) Televideo 925
   11) Wyse Model 50
   12) X Terminal Emulator (xterms)
   13) CDE Terminal Emulator (dtterm)
   14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode
  /sbin/disk0_install[109]: 143 Segmentation Fault
  /sbin/run_install[130]: 155 Segmentation Fault

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions