All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Haber <mh+linux-kernel@zugschlus.de>
To: Greg KH <gregkh@linuxfoundation.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	linux-usb@vger.kernel.org
Subject: Re: USB broken on Banana Pi in Linux 4.6
Date: Tue, 7 Jun 2016 19:06:00 +0200	[thread overview]
Message-ID: <20160607170600.GA22014@torres.zugschlus.de> (raw)
In-Reply-To: <20160603153511.GA28326@kroah.com>

[-- Attachment #1: Type: text/plain, Size: 1574 bytes --]

On Fri, Jun 03, 2016 at 08:35:11AM -0700, Greg KH wrote:
> On Fri, Jun 03, 2016 at 08:53:58AM +0200, Marc Haber wrote:
> > On Mon, May 30, 2016 at 01:47:12PM -0700, Greg KH wrote:
> > > On Mon, May 30, 2016 at 09:02:54PM +0200, Marc Haber wrote:
> > > > Hi,
> > > > 
> > > > on my Bananapis, in kernel 4.6 USB does not work. Kernel configuration
> > > > is USB-wise identical to 4.5 (grepped for differences in (hci|usb)),
> > > > and in 4.6 there is not even /dev/bus/usb.
> > > > 
> > > > In kernel 4.6, the message "ohci-platform: OHCI generic platform
> > > > driver" is the last one, and "ehci-platform 1c14000.usb: EHCI Host
> > > > Controller" is the first one that is missing.
> > > > 
> > > > Is this already a known issue? Or, does a 4.6 kernel need to be
> > > > configured differently if you want USB?
> > > 
> > > Are you sure you configured in the correct host controller that you
> > > want?  Have you done a diff of your .config files to see what you
> > > changed?  How did you create your 4.6 config?
> > 
> > I used make oldconfig, and I diffed the configs for (hci|usb), and
> > there is no difference.
> 
> There might be other things than HCI|USB that are the issue here...

Full config diff attached. Hints are appreciated.

Greetings
Marc

-- 
-----------------------------------------------------------------------------
Marc Haber         | "I don't trust Computers. They | Mailadresse im Header
Leimen, Germany    |  lose things."    Winona Ryder | Fon: *49 6224 1600402
Nordisch by Nature |  How to make an American Quilt | Fax: *49 6224 1600421

[-- Attachment #2: configdiff --]
[-- Type: text/plain, Size: 5481 bytes --]

--- /boot/config-4.5.4-zgbpi-armmp-lpae	2016-05-13 17:02:25.000000000 +0200
+++ /boot/config-4.6.0-zgbpi-armmp-lpae	2016-05-16 14:18:06.000000000 +0200
@@ -3 +3 @@
-# Linux/arm 4.5.4 Kernel Configuration
+# Linux/arm 4.6.0 Kernel Configuration
@@ -173,0 +174,2 @@
+# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
+CONFIG_KALLSYMS_BASE_RELATIVE=y
@@ -183 +185 @@
-# CONFIG_BPF_SYSCALL is not set
+CONFIG_BPF_SYSCALL=y
@@ -368,0 +371 @@
+# CONFIG_ARCH_ARTPEC is not set
@@ -463 +466,2 @@
-# CONFIG_ARM_KERNMEM_PERMS is not set
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_ALIGN_RODATA=y
@@ -712 +715,0 @@
-CONFIG_INET_LRO=m
@@ -1126 +1128,0 @@
-CONFIG_NETLINK_MMAP=y
@@ -1167,0 +1170 @@
+# CONFIG_BT_LEDS is not set
@@ -1181,0 +1185 @@
+CONFIG_AF_KCM=m
@@ -1207,0 +1212,3 @@
+CONFIG_DST_CACHE=y
+CONFIG_NET_DEVLINK=m
+CONFIG_MAY_USE_DEVLINK=m
@@ -1234 +1241 @@
-CONFIG_REGMAP_SPI=m
+CONFIG_REGMAP_SPI=y
@@ -1236 +1242,0 @@
-CONFIG_REGMAP_IRQ=y
@@ -1246 +1252 @@
-# CONFIG_ARM_CCI500_PMU is not set
+# CONFIG_ARM_CCI5xx_PMU is not set
@@ -1407,0 +1414 @@
+# CONFIG_PANEL is not set
@@ -1440,0 +1448,4 @@
+# VOP Bus Driver
+#
+
+#
@@ -1454,0 +1466,4 @@
+
+#
+# VOP Driver
+#
@@ -1575,0 +1591 @@
+# CONFIG_MACSEC is not set
@@ -1816,0 +1833 @@
+# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
@@ -1829 +1845,0 @@
-# CONFIG_TOUCHSCREEN_TS4800 is not set
@@ -1856 +1871,0 @@
-# CONFIG_INPUT_AXP20X_PEK is not set
@@ -1869,0 +1885 @@
+# CONFIG_RMI4_CORE is not set
@@ -1922 +1937,0 @@
-# CONFIG_SERIAL_8250_INGENIC is not set
@@ -1951,0 +1967 @@
+# CONFIG_SERIAL_MVEBU_UART is not set
@@ -1981,0 +1998 @@
+# CONFIG_I2C_DEMUX_PINCTRL is not set
@@ -2031,0 +2049 @@
+# CONFIG_SPI_AXI_SPI_ENGINE is not set
@@ -2034,0 +2053 @@
+# CONFIG_SPI_DESIGNWARE is not set
@@ -2048 +2066,0 @@
-# CONFIG_SPI_DESIGNWARE is not set
@@ -2097 +2115 @@
-CONFIG_PINCTRL_SUNXI_COMMON=y
+CONFIG_PINCTRL_SUNXI=y
@@ -2109,0 +2128 @@
+CONFIG_PINCTRL_SUN8I_H3_R=y
@@ -2131,0 +2151 @@
+# CONFIG_GPIO_MPC8XXX is not set
@@ -2147,0 +2168 @@
+# CONFIG_GPIO_TPIC2810 is not set
@@ -2159,0 +2181 @@
+# CONFIG_GPIO_PISOSR is not set
@@ -2195 +2216,0 @@
-CONFIG_AXP20X_POWER=y
@@ -2246,0 +2268 @@
+# CONFIG_SENSORS_LTC2990 is not set
@@ -2364 +2385,0 @@
-# CONFIG_TS4800_WATCHDOG is not set
@@ -2366 +2386,0 @@
-# CONFIG_BCM7038_WDT is not set
@@ -2389,0 +2410 @@
+# CONFIG_MFD_ACT8945A is not set
@@ -2397 +2418,2 @@
-CONFIG_MFD_AXP20X=y
+# CONFIG_MFD_AXP20X_I2C is not set
+# CONFIG_MFD_AXP20X_RSB is not set
@@ -2454,0 +2477 @@
+# CONFIG_MFD_TPS65086 is not set
@@ -2460 +2482,0 @@
-# CONFIG_MFD_TPS65912 is not set
@@ -2491 +2512,0 @@
-# CONFIG_REGULATOR_AXP20X is not set
@@ -2566,0 +2588,5 @@
+# ACP (Audio CoProcessor) Configuration
+#
+# CONFIG_DRM_AMD_ACP is not set
+
+#
@@ -2636,0 +2663 @@
+CONFIG_SND_JACK_INPUT_DEV=y
@@ -2702,0 +2730 @@
+# CONFIG_SND_SUN4I_SPDIF is not set
@@ -2732 +2760,2 @@
-# CONFIG_SND_SOC_PCM179X is not set
+# CONFIG_SND_SOC_PCM179X_I2C is not set
+# CONFIG_SND_SOC_PCM179X_SPI is not set
@@ -2736,0 +2766 @@
+# CONFIG_SND_SOC_RT5616 is not set
@@ -2801,0 +2832 @@
+# CONFIG_HID_CMEDIA is not set
@@ -3153,0 +3185 @@
+# CONFIG_LEDS_IS31FL32XX is not set
@@ -3208 +3239,0 @@
-# CONFIG_RTC_DRV_DS3232 is not set
@@ -3216 +3246,0 @@
-# CONFIG_RTC_DRV_PCF2127 is not set
@@ -3218 +3247,0 @@
-# CONFIG_RTC_DRV_PCF8563 is not set
@@ -3219,0 +3249 @@
+# CONFIG_RTC_DRV_PCF8563 is not set
@@ -3242 +3271,0 @@
-# CONFIG_RTC_DRV_MAX6902 is not set
@@ -3243,0 +3273,2 @@
+# CONFIG_RTC_DRV_RX4581 is not set
+# CONFIG_RTC_DRV_RX6110 is not set
@@ -3245 +3276 @@
-# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
@@ -3247 +3277,0 @@
-# CONFIG_RTC_DRV_RX4581 is not set
@@ -3248,0 +3279,7 @@
+CONFIG_RTC_I2C_AND_SPI=y
+
+#
+# SPI and I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_PCF2127 is not set
@@ -3298,0 +3336,2 @@
+# CONFIG_QCOM_HIDMA_MGMT is not set
+# CONFIG_QCOM_HIDMA is not set
@@ -3324 +3362,0 @@
-# CONFIG_PANEL is not set
@@ -3343 +3380,0 @@
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
@@ -3350 +3386,0 @@
-# CONFIG_WIMAX_GDM72XX is not set
@@ -3353,2 +3389 @@
-# CONFIG_LUSTRE_FS is not set
-# CONFIG_DGAP is not set
+# CONFIG_LNET is not set
@@ -3358,0 +3394 @@
+# CONFIG_GOLDFISH is not set
@@ -3372,0 +3409 @@
+# CONFIG_COMMON_CLK_CDCE706 is not set
@@ -3379 +3415,0 @@
-# CONFIG_COMMON_CLK_CDCE706 is not set
@@ -3417,0 +3454 @@
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
@@ -3455 +3491,0 @@
-# CONFIG_EXTCON_AXP288 is not set
@@ -3475 +3510,0 @@
-# CONFIG_TS4800_IRQ is not set
@@ -3504 +3539,2 @@
-# CONFIG_NVMEM is not set
+CONFIG_NVMEM=m
+CONFIG_NVMEM_SUNXI_SID=m
@@ -3506,2 +3541,0 @@
-# CONFIG_STM_DUMMY is not set
-# CONFIG_STM_SOURCE_CONSOLE is not set
@@ -3553,0 +3588 @@
+CONFIG_FS_ENCRYPTION=m
@@ -3590,0 +3626 @@
+# CONFIG_FAT_DEFAULT_UTF8 is not set
@@ -3608,0 +3645 @@
+# CONFIG_ORANGEFS_FS is not set
@@ -3654 +3691,3 @@
-# CONFIG_NFSD_PNFS is not set
+CONFIG_NFSD_PNFS=y
+CONFIG_NFSD_BLOCKLAYOUT=y
+CONFIG_NFSD_SCSILAYOUT=y
@@ -3763,0 +3803,2 @@
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DEBUG_PAGE_REF is not set
@@ -3829,0 +3871 @@
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
@@ -3861,0 +3904 @@
+CONFIG_BPF_EVENTS=y
@@ -3887,0 +3931 @@
+# CONFIG_TEST_BITMAP is not set
@@ -3922 +3966 @@
-# CONFIG_ENCRYPTED_KEYS is not set
+CONFIG_ENCRYPTED_KEYS=m
@@ -3959,2 +4002,0 @@
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_PCOMP2=y
@@ -4055 +4096,0 @@
-CONFIG_CRYPTO_ZLIB=m
@@ -4080 +4120,0 @@
-CONFIG_PUBLIC_KEY_ALGO_RSA=m

  reply	other threads:[~2016-06-07 17:06 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-30 19:02 USB broken on Banana Pi in Linux 4.6 Marc Haber
2016-05-30 20:47 ` Greg KH
2016-06-03  6:53   ` Marc Haber
2016-06-03 15:35     ` Greg KH
2016-06-07 17:06       ` Marc Haber [this message]
2016-06-07 17:30         ` Greg KH
2016-06-11 12:55           ` Marc Haber
2016-06-12 16:47             ` Marc Haber
2016-06-12 20:14               ` Alan Stern
2016-06-17 21:31               ` Sudip Mukherjee
2016-06-14  8:45 ` USB broken on Banana Pi in Linux 4.6 [solved] Marc Haber

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160607170600.GA22014@torres.zugschlus.de \
    --to=mh+linux-kernel@zugschlus.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.