From: Stephan Linz <linz@li-pro.net>
To: linux-leds@vger.kernel.org, linux-ide@vger.kernel.org
Cc: "Stephan Linz" <linz@li-pro.net>,
"Joseph Jezak" <josejx@gentoo.org>,
"Nico Macrionitis" <acrux@cruxppc.org>,
"Jörg Sommer" <joerg@alea.gnuu.de>,
"Rob Herring" <robh+dt@kernel.org>,
"Pawel Moll" <pawel.moll@arm.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
"Kumar Gala" <galak@codeaurora.org>,
"Benjamin Herrenschmidt" <benh@kernel.crashing.org>,
"Paul Mackerras" <paulus@samba.org>,
"Michael Ellerman" <mpe@ellerman.id.au>,
devicetree@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/7] powerpc: use the new LED disk activity trigger
Date: Thu, 9 Jun 2016 00:29:38 +0200 [thread overview]
Message-ID: <20160608223000.433-3-linz@li-pro.net> (raw)
In-Reply-To: <20160608223000.433-1-linz@li-pro.net>
- dts: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'ADB_PMU_LED_IDE' to 'ADB_PMU_LED_DISK'
Cc: Joseph Jezak <josejx@gentoo.org>
Cc: Nico Macrionitis <acrux@cruxppc.org>
Cc: Jörg Sommer <joerg@alea.gnuu.de>
Signed-off-by: Stephan Linz <linz@li-pro.net>
---
arch/powerpc/boot/dts/mpc8315erdb.dts | 2 +-
arch/powerpc/boot/dts/mpc8377_rdb.dts | 2 +-
arch/powerpc/boot/dts/mpc8378_rdb.dts | 2 +-
arch/powerpc/boot/dts/mpc8379_rdb.dts | 2 +-
arch/powerpc/configs/pmac32_defconfig | 2 +-
arch/powerpc/configs/ppc6xx_defconfig | 2 +-
drivers/macintosh/Kconfig | 13 ++++++-------
drivers/macintosh/via-pmu-led.c | 4 ++--
8 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 4354684..ca5139e 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -472,7 +472,7 @@
hdd {
gpios = <&mcu_pio 1 0>;
- linux,default-trigger = "ide-disk";
+ linux,default-trigger = "disk-activity";
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 2b4b653..e326139 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -496,7 +496,7 @@
hdd {
gpios = <&mcu_pio 1 0>;
- linux,default-trigger = "ide-disk";
+ linux,default-trigger = "disk-activity";
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 74b6a53..71842fc 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -480,7 +480,7 @@
hdd {
gpios = <&mcu_pio 1 0>;
- linux,default-trigger = "ide-disk";
+ linux,default-trigger = "disk-activity";
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 3b5cbac..e442a29 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -446,7 +446,7 @@
hdd {
gpios = <&mcu_pio 1 0>;
- linux,default-trigger = "ide-disk";
+ linux,default-trigger = "disk-activity";
};
};
};
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index ea8705f..3f6c9a6 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -158,7 +158,7 @@ CONFIG_ADB=y
CONFIG_ADB_CUDA=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_LED=y
-CONFIG_ADB_PMU_LED_IDE=y
+CONFIG_ADB_PMU_LED_DISK=y
CONFIG_PMAC_APM_EMU=m
CONFIG_PMAC_MEDIABAY=y
CONFIG_PMAC_BACKLIGHT=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 99ccbeba..1dde0be 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -442,7 +442,7 @@ CONFIG_ADB=y
CONFIG_ADB_CUDA=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_LED=y
-CONFIG_ADB_PMU_LED_IDE=y
+CONFIG_ADB_PMU_LED_DISK=y
CONFIG_PMAC_APM_EMU=y
CONFIG_PMAC_MEDIABAY=y
CONFIG_PMAC_BACKLIGHT=y
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 3e8b29e..d28690f 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -96,19 +96,18 @@ config ADB_PMU_LED
Support the front LED on Power/iBooks as a generic LED that can
be triggered by any of the supported triggers. To get the
behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
- and the ide-disk LED trigger and configure appropriately through
- sysfs.
+ and the disk LED trigger and configure appropriately through sysfs.
-config ADB_PMU_LED_IDE
- bool "Use front LED as IDE LED by default"
+config ADB_PMU_LED_DISK
+ bool "Use front LED as DISK LED by default"
depends on ADB_PMU_LED
depends on LEDS_CLASS
depends on IDE_GD_ATA
select LEDS_TRIGGERS
- select LEDS_TRIGGER_IDE_DISK
+ select LEDS_TRIGGER_DISK
help
- This option makes the front LED default to the IDE trigger
- so that it blinks on IDE activity.
+ This option makes the front LED default to the disk trigger
+ so that it blinks on disk activity.
config PMAC_SMU
bool "Support for SMU based PowerMacs"
diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c
index 19c3718..ae067ab 100644
--- a/drivers/macintosh/via-pmu-led.c
+++ b/drivers/macintosh/via-pmu-led.c
@@ -73,8 +73,8 @@ static void pmu_led_set(struct led_classdev *led_cdev,
static struct led_classdev pmu_led = {
.name = "pmu-led::front",
-#ifdef CONFIG_ADB_PMU_LED_IDE
- .default_trigger = "ide-disk",
+#ifdef CONFIG_ADB_PMU_LED_DISK
+ .default_trigger = "disk-activity",
#endif
.brightness_set = pmu_led_set,
};
--
2.8.4
next prev parent reply other threads:[~2016-06-08 22:29 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-08 22:29 [PATCH v3 1/7] leds: convert IDE trigger to common disk trigger Stephan Linz
2016-06-08 22:29 ` [PATCH v3 2/7] leds: documentation: 'ide-disk' to 'disk-activity' Stephan Linz
2016-06-21 15:05 ` Mark Rutland
2016-06-22 7:55 ` Jacek Anaszewski
2016-06-22 10:16 ` Mark Rutland
2016-06-22 16:05 ` Stephan Linz
2016-06-23 6:40 ` Jacek Anaszewski
2016-06-23 19:38 ` [PATCH v5] " Stephan Linz
2016-06-24 6:50 ` Jacek Anaszewski
2016-06-24 17:18 ` Stephan Linz
2016-06-08 22:29 ` Stephan Linz [this message]
2016-06-08 22:29 ` [PATCH v3 4/7] arm: use the new LED disk activity trigger Stephan Linz
2016-06-09 7:18 ` Gregory CLEMENT
2016-06-08 22:29 ` [PATCH v3 5/7] mips: " Stephan Linz
2016-06-08 22:29 ` [PATCH v3 6/7] parisc: " Stephan Linz
2016-06-08 22:29 ` [PATCH v3 7/7] unicore32: " Stephan Linz
2016-06-09 7:29 ` [PATCH v3 1/7] leds: convert IDE trigger to common disk trigger Jacek Anaszewski
2016-06-09 22:27 ` Stephan Linz
2016-06-20 8:36 ` Jacek Anaszewski
2016-06-20 21:28 ` Stephan Linz
2016-06-21 7:13 ` Jacek Anaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160608223000.433-3-linz@li-pro.net \
--to=linz@li-pro.net \
--cc=acrux@cruxppc.org \
--cc=benh@kernel.crashing.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=joerg@alea.gnuu.de \
--cc=josejx@gentoo.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.