From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Thu, 9 Jun 2016 22:07:10 +0200 Subject: [Buildroot] [PATCH 2/2] configs/arm_juno: Point to 4.6 mainline kernel In-Reply-To: References: Message-ID: <20160609220710.45d49169@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Thu, 9 Jun 2016 11:40:31 +0100, Joao Pinto wrote: > diff --git a/configs/arm_juno_defconfig b/configs/arm_juno_defconfig > index 5ce882c..153060a 100644 > --- a/configs/arm_juno_defconfig > +++ b/configs/arm_juno_defconfig > @@ -1,13 +1,12 @@ > BR2_aarch64=y > BR2_KERNEL_HEADERS_VERSION=y > -BR2_DEFAULT_KERNEL_VERSION="4.2.2" > -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y > +BR2_DEFAULT_KERNEL_VERSION="4.6" No, you should have kept using BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_X_Y, since this tells Buildroot to use the kernel sources specified below for the kernel headers used to build the toolchain. > BR2_TARGET_GENERIC_HOSTNAME="juno-buildroot" > BR2_TARGET_GENERIC_ISSUE="Welcome to SNPS Juno by Buildroot" > BR2_LINUX_KERNEL=y > BR2_LINUX_KERNEL_CUSTOM_GIT=y > -BR2_LINUX_KERNEL_CUSTOM_REPO_URL="http://git.linaro.org/kernel/linux-linaro-tracking.git" > -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="linux-linaro-4.3-2015.11" > +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git" > +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="v4.6" I've already applied, but when using such an official release, using the tarball would be much more download efficient. Applied with the kernel headers change. Thanks! Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com