On Saturday 18 June 2016 17:22:59 Pavel Machek wrote:
> > +/*
> > + *
> > + * Stingray sensor mode settings for Scooby
> > + *
> > + *
> > + */
> 
> I'd fix it to normal comment style... and possibly remove it. Can you
> understand what it says?
> 
> > +	},
> > +	.regs = {
> > +		{ ET8EK8_REG_8BIT, 0x1239, 0x4F },	/*        */
> > +		{ ET8EK8_REG_8BIT, 0x1238, 0x02 },	/*        */
> > +		{ ET8EK8_REG_8BIT, 0x123B, 0x70 },	/*        */
> > +		{ ET8EK8_REG_8BIT, 0x123A, 0x05 },	/*        */
> > +		{ ET8EK8_REG_8BIT, 0x121B, 0x63 },	/*        */
> > +		{ ET8EK8_REG_8BIT, 0x1220, 0x85 },	/*        */
> > +		{ ET8EK8_REG_8BIT, 0x1221, 0x00 },	/*        */
> > +		{ ET8EK8_REG_8BIT, 0x1222, 0x58 },	/*        */
> > +		{ ET8EK8_REG_8BIT, 0x1223, 0x00 },	/*        */
> > +		{ ET8EK8_REG_8BIT, 0x121D, 0x63 },	/*        */
> > +		{ ET8EK8_REG_8BIT, 0x125D, 0x83 },	/*        */
> > +		{ ET8EK8_REG_TERM, 0, 0}
> > +	}
> 
> I'd remove the empty comments...
> 
> > +struct et8ek8_meta_reglist meta_reglist = {
> > +	.version = "V14 03-June-2008",
> 
> Do we need the version?
> 
> > +	.reglist = {
> > +		{ .ptr = &mode1_poweron_mode2_16vga_2592x1968_12_07fps },
> > +		{ .ptr = &mode1_16vga_2592x1968_13_12fps_dpcm10_8 },
> > +		{ .ptr = &mode3_4vga_1296x984_29_99fps_dpcm10_8 },
> > +		{ .ptr = &mode4_svga_864x656_29_88fps },
> > +		{ .ptr = &mode5_vga_648x492_29_93fps },
> > +		{ .ptr = &mode2_16vga_2592x1968_3_99fps },
> > +		{ .ptr = &mode_648x492_5fps },
> > +		{ .ptr = &mode3_4vga_1296x984_5fps },
> > +		{ .ptr = &mode_4vga_1296x984_25fps_dpcm10_8 },
> > +		{ .ptr = 0 }
> > +	}
> > +};
> 
> I'd say .ptr = NULL.
> 

Anyway, this code was generated from configuration ini files and perl 
script available from: https://gitorious.org/omap3camera/camera-firmware

Originally in Maemo above C structure is compiled into binary file and 
via request_firmware() loaded from userspace to kernel driver.

For me this sounds like a big overkill, so I included above reglist code 
direcly into et8ek8 kernel driver to avoid request_firmware() and 
separate userspace storage...

And for smia-sensor (front webcam) in that gitorious repository is also 
reglist structure. It is not needed? Can somebody investigate why it is 
not needed?

-- 
Pali Rohár
pali.rohar@gmail.com