All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
To: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
	Alexandre Courbot
	<gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH] ARM: tegra: add DT binding for Tegra186 BPMP I2C
Date: Thu,  7 Jul 2016 13:37:11 -0600	[thread overview]
Message-ID: <20160707193711.5891-1-swarren@wwwdotorg.org> (raw)

From: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

In Tegra186, the BPMP (Boot and Power Management Processor) owns certain
HW devices, such as the I2C controller for the power management I2C bus.
Software running on other CPUs must perform IPC to the BPMP in order to
execute transactions on that I2C bus. This binding describes an I2C bus
that is accessed in such a fashion.

Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 .../bindings/i2c/nvidia,tegra186-bpmp-i2c.txt      | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt

diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
new file mode 100644
index 000000000000..eb9f70723ab7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
@@ -0,0 +1,35 @@
+NVIDIA Tegra186 BPMP I2C controller
+
+In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW
+devices, such as the I2C controller for the power management I2C bus. Software
+running on other CPUs must perform IPC to the BPMP in order to execute
+transactions on that I2C bus. This binding describes an I2C bus that is
+accessed in such a fashion.
+
+Required properties:
+- compatible:
+    Array of strings.
+    One of:
+    - "nvidia,tegra186-bpmp-i2c".
+- address-cells: Address cells for I2C device address.
+    Single-cell integer.
+    Must be <1>.
+- size-cells:
+    Single-cell integer.
+    Must be <0>.
+- nvidia,bpmp:
+    The phandle to the BPMP device.
+- nvidia,bpmp-bus-id:
+    Single-cell integer.
+    Indicates the I2C bus number this DT node represent, as defined by the
+    BPMP firmware.
+
+Example:
+
+	bpmp-i2c {
+		compatible = "nvidia,tegra186-bpmp-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		nvidia,bpmp = <&bpmp>;
+		nvidia,bpmp-bus-id = <5>;
+	};
-- 
2.9.0

             reply	other threads:[~2016-07-07 19:37 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-07 19:37 Stephen Warren [this message]
     [not found] ` <20160707193711.5891-1-swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2016-07-16 21:07   ` [PATCH] ARM: tegra: add DT binding for Tegra186 BPMP I2C Rob Herring
2016-07-18 16:16     ` Stephen Warren
     [not found]       ` <578D00DB.4080307-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2016-07-18 21:00         ` Rob Herring
     [not found]           ` <CAL_JsqKuV+nMCBChBGAHzVWBPEbtDB3T=nOukR9159izEz6maQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-07-18 23:31             ` Stephen Warren
     [not found]               ` <578D66DA.5030307-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2016-07-19  1:52                 ` Rob Herring
     [not found]                   ` <CAL_JsqLqCC+rN61Wu5J08MsnV9anFrNr=2eHWWcjEcUZAapucA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-07-19  2:02                     ` Stephen Warren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160707193711.5891-1-swarren@wwwdotorg.org \
    --to=swarren-3lzwwm7+weoh9zmkesr00q@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    --cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.