From mboxrd@z Thu Jan 1 00:00:00 1970 From: Georges Savoundararadj Date: Fri, 8 Jul 2016 23:40:01 -0700 Subject: [Buildroot] [PATCH 2/5] freescale: genimage: Use the common genimage template In-Reply-To: <20160709064004.8844-1-savoundg@gmail.com> References: <20160709064004.8844-1-savoundg@gmail.com> Message-ID: <20160709064004.8844-3-savoundg@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net The boards imx6dlsabreauto, imx6dlsabresd, imx6qsabreauto, imx6qsabresd, imx6sxsabresd were referring to board/freescale/create-boot-sd.sh for the sdcard image generation: * Remove board/freescale/create-boot-sd.sh * Use the common Freescale genimage template instead. The offset of the first partition was 1MB in the script and is modified to 8MB in the template. * Fix the readme.txt file accordingly Signed-off-by: Georges Savoundararadj --- board/freescale/create-boot-sd.sh | 93 ----------------------------- board/freescale/imx6sabre/readme.txt | 10 +++- configs/freescale_imx6dlsabreauto_defconfig | 6 ++ configs/freescale_imx6dlsabresd_defconfig | 6 ++ configs/freescale_imx6qsabreauto_defconfig | 6 ++ configs/freescale_imx6qsabresd_defconfig | 6 ++ configs/freescale_imx6sxsabresd_defconfig | 6 ++ 7 files changed, 37 insertions(+), 96 deletions(-) delete mode 100755 board/freescale/create-boot-sd.sh diff --git a/board/freescale/create-boot-sd.sh b/board/freescale/create-boot-sd.sh deleted file mode 100755 index af45115..0000000 --- a/board/freescale/create-boot-sd.sh +++ /dev/null @@ -1,93 +0,0 @@ -#!/bin/sh - -set -u -set -e - -PROGNAME=$(basename $0) - -usage() -{ - echo "Create an SD card that boots on an i.MX53/6 board." - echo - echo "Note: all data on the the card will be completely deleted!" - echo "Use with care!" - echo "Superuser permissions may be required to write to the device." - echo - echo "Usage: ${PROGNAME} " - echo "Arguments:" - echo " The device to be written to" - echo - echo "Example: ${PROGNAME} /dev/mmcblk0" - echo -} - -if [ $# -ne 1 ]; then - usage - exit 1 -fi - -if [ $(id -u) -ne 0 ]; then - echo "${PROGNAME} must be run as root" - exit 1 -fi - -DEV=${1} - -# The partition name prefix depends on the device name: -# - /dev/sde -> /dev/sde1 -# - /dev/mmcblk0 -> /dev/mmcblk0p1 -if echo ${DEV}|grep -q mmcblk ; then - PART="p" -else - PART="" -fi - -PART1=${DEV}${PART}1 -PART2=${DEV}${PART}2 - -# Unmount the partitions if mounted -umount ${PART1} || true -umount ${PART2} || true - -# First, clear the card -dd if=/dev/zero of=${DEV} bs=1M count=20 - -sync - -# Partition the card. -# SD layout for i.MX6 boot: -# - Bootloader at offset 1024 -# - FAT partition starting at 1MB offset, containing uImage and *.dtb -# - ext2/3 partition formatted as ext2 or ext3, containing the root filesystem. -sfdisk ${DEV} < *** WARNING! The script will destroy all the card content. Use with care! *** - ./board/freescale/create-boot-sd.sh +For details about the medium image layout, see the definition in +board/freescale/common/genimage.cfg.template. Boot the SABRE board ==================== diff --git a/configs/freescale_imx6dlsabreauto_defconfig b/configs/freescale_imx6dlsabreauto_defconfig index a58ab5d..5a8d4ce 100644 --- a/configs/freescale_imx6dlsabreauto_defconfig +++ b/configs/freescale_imx6dlsabreauto_defconfig @@ -23,8 +23,14 @@ BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-sabreauto" # filesystem +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh" BR2_TARGET_ROOTFS_EXT2=y +# required tools to create the microSD image +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y + # bootloader BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="mx6dlsabreauto" diff --git a/configs/freescale_imx6dlsabresd_defconfig b/configs/freescale_imx6dlsabresd_defconfig index ecb5f8b..c01bf7a 100644 --- a/configs/freescale_imx6dlsabresd_defconfig +++ b/configs/freescale_imx6dlsabresd_defconfig @@ -23,8 +23,14 @@ BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-sabresd" # filesystem +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh" BR2_TARGET_ROOTFS_EXT2=y +# required tools to create the microSD image +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y + # bootloader BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="mx6dlsabresd" diff --git a/configs/freescale_imx6qsabreauto_defconfig b/configs/freescale_imx6qsabreauto_defconfig index 6ed33ee..b9a9446 100644 --- a/configs/freescale_imx6qsabreauto_defconfig +++ b/configs/freescale_imx6qsabreauto_defconfig @@ -23,8 +23,14 @@ BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-sabreauto" # filesystem +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh" BR2_TARGET_ROOTFS_EXT2=y +# required tools to create the microSD image +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y + # bootloader BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="mx6qsabreauto" diff --git a/configs/freescale_imx6qsabresd_defconfig b/configs/freescale_imx6qsabresd_defconfig index bd01f05..b7419b0 100644 --- a/configs/freescale_imx6qsabresd_defconfig +++ b/configs/freescale_imx6qsabresd_defconfig @@ -23,8 +23,14 @@ BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-sabresd" # filesystem +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh" BR2_TARGET_ROOTFS_EXT2=y +# required tools to create the microSD image +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y + # bootloader BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="mx6qsabresd" diff --git a/configs/freescale_imx6sxsabresd_defconfig b/configs/freescale_imx6sxsabresd_defconfig index 2519f49..9f8df63 100644 --- a/configs/freescale_imx6sxsabresd_defconfig +++ b/configs/freescale_imx6sxsabresd_defconfig @@ -21,8 +21,14 @@ BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-sdb" # filesystem +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh" BR2_TARGET_ROOTFS_EXT2=y +# required tools to create the microSD image +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y + # bootloader BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="mx6sxsabresd" -- 2.9.0