From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 1/5] freescale: genimage: Factorize scripts
Date: Sat, 16 Jul 2016 12:41:25 +0200 [thread overview]
Message-ID: <20160716124125.7ed46855@free-electrons.com> (raw)
In-Reply-To: <20160709064004.8844-2-savoundg@gmail.com>
Hello,
On Fri, 8 Jul 2016 23:40:00 -0700, Georges Savoundararadj wrote:
> For the boards imx6ulevk, imx6sabresd, mx25pdk, mx51evk, mx53loco:
> * Replace genimage.cfg with a common Freescale genimage template named
> genimage.cfg.template because they all use the same layout. The only
> difference comes from the device tree blobs.
> * Replace each post-image.sh script with a generic post-image.sh script
> which is able to generate the right genimage.cfg depending on:
> ** the image type (zImage or uImage) from BR2_LINUX_KERNEL_UIMAGE
> ** the device tree blobs from BR2_LINUX_KERNEL_INTREE_DTS_NAME
> ** the rootfs type (ext2, ext3 or ext4) from BR2_TARGET_ROOTFS_EXT2
> * Fix the readme.txt files accordingly
>
> Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Peter, Yann, Fabio, could you have a look at this patch and let me know
what you think?
On one hand, yes the genimage.cfg files and post-image scripts for the
different freescale boards are very similar, so some factorization
seems to make sense.
On the other hand, the factorization implies a bit of additional
complexity, which is not that nice for defconfigs, that aim at being
simple.
What is your take on this factorization vs. complexity trade-off? I'm
keeping the full patch below so you can have a look.
Thanks,
Thomas
> ---
> .../genimage.cfg => common/genimage.cfg.template} | 13 ++--
> board/freescale/common/post-image.sh | 71 ++++++++++++++++++++++
> board/freescale/imx25pdk/post-image.sh | 16 -----
> board/freescale/imx25pdk/readme.txt | 2 +-
> board/freescale/imx51evk/genimage.cfg | 41 -------------
> board/freescale/imx51evk/post-image.sh | 16 -----
> board/freescale/imx51evk/readme.txt | 2 +-
> board/freescale/imx53loco/genimage.cfg | 42 -------------
> board/freescale/imx53loco/post-image.sh | 16 -----
> board/freescale/imx6ulevk/genimage.cfg | 41 -------------
> board/freescale/imx6ulevk/post-image.sh | 16 -----
> board/freescale/imx6ulevk/readme.txt | 2 +-
> board/freescale/imx7dsdb/genimage.cfg | 41 -------------
> board/freescale/imx7dsdb/post-image.sh | 16 -----
> board/freescale/imx7dsdb/readme.txt | 2 +-
> configs/freescale_imx6ulevk_defconfig | 2 +-
> configs/freescale_imx7dsabresd_defconfig | 2 +-
> configs/mx25pdk_defconfig | 2 +-
> configs/mx51evk_defconfig | 2 +-
> configs/mx53loco_defconfig | 2 +-
> 20 files changed, 86 insertions(+), 261 deletions(-)
> rename board/freescale/{imx25pdk/genimage.cfg => common/genimage.cfg.template} (58%)
> create mode 100755 board/freescale/common/post-image.sh
> delete mode 100755 board/freescale/imx25pdk/post-image.sh
> delete mode 100644 board/freescale/imx51evk/genimage.cfg
> delete mode 100755 board/freescale/imx51evk/post-image.sh
> delete mode 100644 board/freescale/imx53loco/genimage.cfg
> delete mode 100755 board/freescale/imx53loco/post-image.sh
> delete mode 100644 board/freescale/imx6ulevk/genimage.cfg
> delete mode 100755 board/freescale/imx6ulevk/post-image.sh
> delete mode 100644 board/freescale/imx7dsdb/genimage.cfg
> delete mode 100755 board/freescale/imx7dsdb/post-image.sh
>
> diff --git a/board/freescale/imx25pdk/genimage.cfg b/board/freescale/common/genimage.cfg.template
> similarity index 58%
> rename from board/freescale/imx25pdk/genimage.cfg
> rename to board/freescale/common/genimage.cfg.template
> index 9386e32..3adb12a 100644
> --- a/board/freescale/imx25pdk/genimage.cfg
> +++ b/board/freescale/common/genimage.cfg.template
> @@ -1,17 +1,16 @@
> -# Minimal SD card image for the Freescale's i.MX25 PDK board
> +# Minimal SD card image for the Freescale boards Template
> #
> -# We mimic the .sdcard Freescale's image format for i.MX25:
> +# We mimic the .sdcard Freescale's image format:
> # * the SD card must have 1 kB free space at the beginning,
> # * U-Boot is dumped as is,
> -# * a FAT partition at offset 8 MB is containing zImage and dtbs,
> -# * a single root filesystem partition is required (Ext4 in this case).
> +# * a FAT partition at offset 8 MB is containing zImage/uImage and DTB files
> +# * a single root filesystem partition is required (ext2, ext3 or ext4)
> #
>
> image boot.vfat {
> vfat {
> files = {
> - "imx25-pdk.dtb",
> - "zImage"
> + %FILES%
> }
> }
> size = 16M
> @@ -36,6 +35,6 @@ image sdcard.img {
>
> partition rootfs {
> partition-type = 0x83
> - image = "rootfs.ext4"
> + image = %ROOTFS%
> }
> }
> diff --git a/board/freescale/common/post-image.sh b/board/freescale/common/post-image.sh
> new file mode 100755
> index 0000000..6b22cf2
> --- /dev/null
> +++ b/board/freescale/common/post-image.sh
> @@ -0,0 +1,71 @@
> +#!/usr/bin/env bash
> +
> +#
> +# dtb_list extracts the list of DTB files from BR2_LINUX_KERNEL_INTREE_DTS_NAME
> +# in ${BR_CONFIG}, then prints the corresponding list of file names for the
> +# genimage configuration file
> +#
> +dtb_list()
> +{
> + local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})"
> +
> + for dt in $DTB_LIST; do
> + echo -n "\"$dt.dtb\", "
> + done
> +}
> +
> +#
> +# linux_image extracts the Linux image format from BR2_LINUX_KERNEL_UIMAGE in
> +# ${BR_CONFIG}, then prints the corresponding file name for the genimage
> +# configuration file
> +#
> +linux_image()
> +{
> + if grep -Eq "^BR2_LINUX_KERNEL_UIMAGE=y$" ${BR2_CONFIG}; then
> + echo "\"uImage\""
> + else
> + echo "\"zImage\""
> + fi
> +}
> +
> +#
> +# fstype extracts the type of the filesystem generated from BR_TARGET_ROOTFS_EXT2_*
> +# in ${BR_CONFIG}, then prints the extension
> +#
> +fstype()
> +{
> + if grep -Eq "^BR2_TARGET_ROOTFS_EXT2_4=y$" ${BR2_CONFIG}; then
> + echo "ext4"
> + elif grep -Eq "^BR2_TARGET_ROOTFS_EXT2_3=y$" ${BR2_CONFIG}; then
> + echo "ext3"
> + else
> + echo "ext2"
> + fi
> +}
> +
> +main()
> +{
> + local FILES="$(dtb_list) $(linux_image)"
> + local ROOTFS="\"rootfs.$(fstype)\""
> + local GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)"
> + local GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> +
> + sed -e "s/%FILES%/${FILES}/" \
> + -e "s/%ROOTFS%/${ROOTFS}/" \
> + board/freescale/common/genimage.cfg.template > ${GENIMAGE_CFG}
> +
> + rm -rf "${GENIMAGE_TMP}"
> +
> + genimage \
> + --rootpath "${TARGET_DIR}" \
> + --tmppath "${GENIMAGE_TMP}" \
> + --inputpath "${BINARIES_DIR}" \
> + --outputpath "${BINARIES_DIR}" \
> + --config "${GENIMAGE_CFG}"
> +
> + rm -f ${GENIMAGE_CFG}
> +
> + exit $?
> +}
> +
> +main $@
> diff --git a/board/freescale/imx25pdk/post-image.sh b/board/freescale/imx25pdk/post-image.sh
> deleted file mode 100755
> index 8757355..0000000
> --- a/board/freescale/imx25pdk/post-image.sh
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -#!/usr/bin/env bash
> -
> -BOARD_DIR="$(dirname $0)"
> -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
> -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> -
> -rm -rf "${GENIMAGE_TMP}"
> -
> -genimage \
> - --rootpath "${TARGET_DIR}" \
> - --tmppath "${GENIMAGE_TMP}" \
> - --inputpath "${BINARIES_DIR}" \
> - --outputpath "${BINARIES_DIR}" \
> - --config "${GENIMAGE_CFG}"
> -
> -exit $?
> diff --git a/board/freescale/imx25pdk/readme.txt b/board/freescale/imx25pdk/readme.txt
> index a154b99..df7c617 100644
> --- a/board/freescale/imx25pdk/readme.txt
> +++ b/board/freescale/imx25pdk/readme.txt
> @@ -40,7 +40,7 @@ command as root:
> *** WARNING! This will destroy all the card content. Use with care! ***
>
> For details about the medium image layout, see the definition in
> -board/freescale/imx25pdk/genimage.cfg.
> +board/freescale/common/genimage.cfg.template.
>
> Boot the i.MX25 PDK board
> =========================
> diff --git a/board/freescale/imx51evk/genimage.cfg b/board/freescale/imx51evk/genimage.cfg
> deleted file mode 100644
> index a44ed30..0000000
> --- a/board/freescale/imx51evk/genimage.cfg
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -# Minimal SD card image for the Freescale's i.MX51 EVK board
> -#
> -# We mimic the .sdcard Freescale's image format for i.MX51:
> -# * the microSD card must have 1 kB free space at the beginning,
> -# * U-Boot is dumped as is,
> -# * a FAT partition at offset 8 MB is containing zImage and dtbs,
> -# * a single root filesystem partition is required (Ext4 in this case).
> -#
> -
> -image boot.vfat {
> - vfat {
> - files = {
> - "imx51-babbage.dtb",
> - "zImage"
> - }
> - }
> - size = 16M
> -}
> -
> -image sdcard.img {
> - hdimage {
> - }
> -
> - partition u-boot {
> - in-partition-table = "no"
> - image = "u-boot.imx"
> - offset = 1024
> - }
> -
> - partition boot {
> - partition-type = 0xC
> - bootable = "true"
> - image = "boot.vfat"
> - offset = 8M
> - }
> -
> - partition rootfs {
> - partition-type = 0x83
> - image = "rootfs.ext4"
> - }
> -}
> diff --git a/board/freescale/imx51evk/post-image.sh b/board/freescale/imx51evk/post-image.sh
> deleted file mode 100755
> index 8757355..0000000
> --- a/board/freescale/imx51evk/post-image.sh
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -#!/usr/bin/env bash
> -
> -BOARD_DIR="$(dirname $0)"
> -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
> -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> -
> -rm -rf "${GENIMAGE_TMP}"
> -
> -genimage \
> - --rootpath "${TARGET_DIR}" \
> - --tmppath "${GENIMAGE_TMP}" \
> - --inputpath "${BINARIES_DIR}" \
> - --outputpath "${BINARIES_DIR}" \
> - --config "${GENIMAGE_CFG}"
> -
> -exit $?
> diff --git a/board/freescale/imx51evk/readme.txt b/board/freescale/imx51evk/readme.txt
> index 6639a92..bf739fd 100644
> --- a/board/freescale/imx51evk/readme.txt
> +++ b/board/freescale/imx51evk/readme.txt
> @@ -40,7 +40,7 @@ command as root:
> *** WARNING! This will destroy all the card content. Use with care! ***
>
> For details about the medium image layout, see the definition in
> -board/freescale/imx51evk/genimage.cfg.
> +board/freescale/common/genimage.cfg.template.
>
> Boot the i.MX51 EVK board
> =========================
> diff --git a/board/freescale/imx53loco/genimage.cfg b/board/freescale/imx53loco/genimage.cfg
> deleted file mode 100644
> index b56c168..0000000
> --- a/board/freescale/imx53loco/genimage.cfg
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -# Minimal microSD card image for the Freescale's i.MX53 QSB board
> -#
> -# We mimic the .sdcard Freescale's image format for i.MX53:
> -# * the microSD card must have 1 kB free space at the beginning,
> -# * U-Boot is dumped as is,
> -# * a FAT partition at offset 8 MB is containing zImage and dtbs,
> -# * a single root filesystem partition is required (Ext4 in this case).
> -#
> -
> -image boot.vfat {
> - vfat {
> - files = {
> - "imx53-qsb.dtb",
> - "imx53-qsrb.dtb",
> - "zImage"
> - }
> - }
> - size = 16M
> -}
> -
> -image sdcard.img {
> - hdimage {
> - }
> -
> - partition u-boot {
> - in-partition-table = "no"
> - image = "u-boot.imx"
> - offset = 1024
> - }
> -
> - partition boot {
> - partition-type = 0xC
> - bootable = "true"
> - image = "boot.vfat"
> - offset = 8M
> - }
> -
> - partition rootfs {
> - partition-type = 0x83
> - image = "rootfs.ext4"
> - }
> -}
> diff --git a/board/freescale/imx53loco/post-image.sh b/board/freescale/imx53loco/post-image.sh
> deleted file mode 100755
> index 8757355..0000000
> --- a/board/freescale/imx53loco/post-image.sh
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -#!/usr/bin/env bash
> -
> -BOARD_DIR="$(dirname $0)"
> -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
> -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> -
> -rm -rf "${GENIMAGE_TMP}"
> -
> -genimage \
> - --rootpath "${TARGET_DIR}" \
> - --tmppath "${GENIMAGE_TMP}" \
> - --inputpath "${BINARIES_DIR}" \
> - --outputpath "${BINARIES_DIR}" \
> - --config "${GENIMAGE_CFG}"
> -
> -exit $?
> diff --git a/board/freescale/imx6ulevk/genimage.cfg b/board/freescale/imx6ulevk/genimage.cfg
> deleted file mode 100644
> index b58193a..0000000
> --- a/board/freescale/imx6ulevk/genimage.cfg
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -# Minimal microSD card image for the Freescale's i.MX6UL EVK board
> -#
> -# We mimic the .sdcard Freescale's image format for i.MX6UL:
> -# * the microSD card must have 1 kB free space at the beginning,
> -# * U-Boot is dumped as is,
> -# * a FAT partition at offset 8 MB is containing zImage and dtbs,
> -# * a single root filesystem partition is required (Ext4 in this case).
> -#
> -
> -image boot.vfat {
> - vfat {
> - files = {
> - "imx6ul-14x14-evk.dtb",
> - "zImage"
> - }
> - }
> - size = 16M
> -}
> -
> -image sdcard.img {
> - hdimage {
> - }
> -
> - partition u-boot {
> - in-partition-table = "no"
> - image = "u-boot.imx"
> - offset = 1024
> - }
> -
> - partition boot {
> - partition-type = 0xC
> - bootable = "true"
> - image = "boot.vfat"
> - offset = 8M
> - }
> -
> - partition rootfs {
> - partition-type = 0x83
> - image = "rootfs.ext4"
> - }
> -}
> diff --git a/board/freescale/imx6ulevk/post-image.sh b/board/freescale/imx6ulevk/post-image.sh
> deleted file mode 100755
> index 8757355..0000000
> --- a/board/freescale/imx6ulevk/post-image.sh
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -#!/usr/bin/env bash
> -
> -BOARD_DIR="$(dirname $0)"
> -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
> -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> -
> -rm -rf "${GENIMAGE_TMP}"
> -
> -genimage \
> - --rootpath "${TARGET_DIR}" \
> - --tmppath "${GENIMAGE_TMP}" \
> - --inputpath "${BINARIES_DIR}" \
> - --outputpath "${BINARIES_DIR}" \
> - --config "${GENIMAGE_CFG}"
> -
> -exit $?
> diff --git a/board/freescale/imx6ulevk/readme.txt b/board/freescale/imx6ulevk/readme.txt
> index 462715c..98de277 100644
> --- a/board/freescale/imx6ulevk/readme.txt
> +++ b/board/freescale/imx6ulevk/readme.txt
> @@ -43,7 +43,7 @@ command as root:
> *** WARNING! This will destroy all the card content. Use with care! ***
>
> For details about the medium image layout, see the definition in
> -board/freescale/imx6ulevk/genimage.cfg.
> +board/freescale/common/genimage.cfg.template.
>
> Boot the i.MX6UL EVK board
> =========================
> diff --git a/board/freescale/imx7dsdb/genimage.cfg b/board/freescale/imx7dsdb/genimage.cfg
> deleted file mode 100644
> index aa6ae9e..0000000
> --- a/board/freescale/imx7dsdb/genimage.cfg
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -# Minimal microSD card image for the Freescale's i.MX7D SDB board
> -#
> -# We mimic the .sdcard Freescale's image format for i.MX7D:
> -# * the microSD card must have 1 kB free space at the beginning,
> -# * U-Boot is dumped as is,
> -# * a FAT partition at offset 8 MB is containing zImage and dtbs,
> -# * a single root filesystem partition is required (Ext4 in this case).
> -#
> -
> -image boot.vfat {
> - vfat {
> - files = {
> - "imx7d-sdb.dtb",
> - "zImage"
> - }
> - }
> - size = 16M
> -}
> -
> -image sdcard.img {
> - hdimage {
> - }
> -
> - partition u-boot {
> - in-partition-table = "no"
> - image = "u-boot.imx"
> - offset = 1024
> - }
> -
> - partition boot {
> - partition-type = 0xC
> - bootable = "true"
> - image = "boot.vfat"
> - offset = 8M
> - }
> -
> - partition rootfs {
> - partition-type = 0x83
> - image = "rootfs.ext4"
> - }
> -}
> diff --git a/board/freescale/imx7dsdb/post-image.sh b/board/freescale/imx7dsdb/post-image.sh
> deleted file mode 100755
> index 8757355..0000000
> --- a/board/freescale/imx7dsdb/post-image.sh
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -#!/usr/bin/env bash
> -
> -BOARD_DIR="$(dirname $0)"
> -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
> -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> -
> -rm -rf "${GENIMAGE_TMP}"
> -
> -genimage \
> - --rootpath "${TARGET_DIR}" \
> - --tmppath "${GENIMAGE_TMP}" \
> - --inputpath "${BINARIES_DIR}" \
> - --outputpath "${BINARIES_DIR}" \
> - --config "${GENIMAGE_CFG}"
> -
> -exit $?
> diff --git a/board/freescale/imx7dsdb/readme.txt b/board/freescale/imx7dsdb/readme.txt
> index c72e9a9..9aeeb16 100644
> --- a/board/freescale/imx7dsdb/readme.txt
> +++ b/board/freescale/imx7dsdb/readme.txt
> @@ -40,7 +40,7 @@ command as root:
> *** WARNING! This will destroy all the card content. Use with care! ***
>
> For details about the medium image layout, see the definition in
> -board/freescale/imx7dsdb/genimage.cfg.
> +board/freescale/common/genimage.cfg.template.
>
> Boot the i.MX7D SDB board
> =========================
> diff --git a/configs/freescale_imx6ulevk_defconfig b/configs/freescale_imx6ulevk_defconfig
> index 5a18c1d..fb860b5 100644
> --- a/configs/freescale_imx6ulevk_defconfig
> +++ b/configs/freescale_imx6ulevk_defconfig
> @@ -31,6 +31,6 @@ BR2_PACKAGE_HOST_GENIMAGE=y
> BR2_PACKAGE_HOST_MTOOLS=y
>
> # filesystem / image
> -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/imx6ulevk/post-image.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh"
> BR2_TARGET_ROOTFS_EXT2=y
> BR2_TARGET_ROOTFS_EXT2_4=y
> diff --git a/configs/freescale_imx7dsabresd_defconfig b/configs/freescale_imx7dsabresd_defconfig
> index 6768041..311f8ac 100644
> --- a/configs/freescale_imx7dsabresd_defconfig
> +++ b/configs/freescale_imx7dsabresd_defconfig
> @@ -33,4 +33,4 @@ BR2_TARGET_UBOOT_FORMAT_IMX=y
> BR2_PACKAGE_HOST_DOSFSTOOLS=y
> BR2_PACKAGE_HOST_GENIMAGE=y
> BR2_PACKAGE_HOST_MTOOLS=y
> -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/imx7dsdb/post-image.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh"
> diff --git a/configs/mx25pdk_defconfig b/configs/mx25pdk_defconfig
> index d682f0f..645fe8a 100644
> --- a/configs/mx25pdk_defconfig
> +++ b/configs/mx25pdk_defconfig
> @@ -14,7 +14,7 @@ BR2_PACKAGE_HOST_GENIMAGE=y
> BR2_PACKAGE_HOST_MTOOLS=y
>
> # Filesystem
> -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/imx25pdk/post-image.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh"
> BR2_TARGET_ROOTFS_EXT2=y
> BR2_TARGET_ROOTFS_EXT2_4=y
>
> diff --git a/configs/mx51evk_defconfig b/configs/mx51evk_defconfig
> index 0e2682a..aee4d6b 100644
> --- a/configs/mx51evk_defconfig
> +++ b/configs/mx51evk_defconfig
> @@ -17,7 +17,7 @@ BR2_PACKAGE_HOST_GENIMAGE=y
> BR2_PACKAGE_HOST_MTOOLS=y
>
> # Filesystem
> -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/imx51evk/post-image.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh"
> BR2_TARGET_ROOTFS_EXT2=y
> BR2_TARGET_ROOTFS_EXT2_4=y
>
> diff --git a/configs/mx53loco_defconfig b/configs/mx53loco_defconfig
> index 72389e4..b549bd2 100644
> --- a/configs/mx53loco_defconfig
> +++ b/configs/mx53loco_defconfig
> @@ -17,7 +17,7 @@ BR2_PACKAGE_HOST_GENIMAGE=y
> BR2_PACKAGE_HOST_MTOOLS=y
>
> # Filesystem
> -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/imx53loco/post-image.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/post-image.sh"
> BR2_TARGET_ROOTFS_EXT2=y
> BR2_TARGET_ROOTFS_EXT2_4=y
>
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2016-07-16 10:41 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-09 6:39 [Buildroot] [PATCH 0/5] freescale: Factorize SD card generation scripts Georges Savoundararadj
2016-07-09 6:40 ` [Buildroot] [PATCH 1/5] freescale: genimage: Factorize scripts Georges Savoundararadj
2016-07-16 10:41 ` Thomas Petazzoni [this message]
2016-07-16 20:36 ` Fabio Estevam
2016-07-20 23:55 ` Fabio Estevam
2016-07-09 6:40 ` [Buildroot] [PATCH 2/5] freescale: genimage: Use the common genimage template Georges Savoundararadj
2016-07-09 6:40 ` [Buildroot] [PATCH 3/5] imx6sololiteevk: use " Georges Savoundararadj
2016-07-09 6:40 ` [Buildroot] [PATCH 4/5] imx6sololiteevk: use zImage Georges Savoundararadj
2016-07-09 6:40 ` [Buildroot] [PATCH 5/5] imx6dlsabresd: " Georges Savoundararadj
2016-09-07 22:29 ` [Buildroot] [PATCH v2 1/5] freescale: genimage: Factorize scripts Georges Savoundararadj
2016-09-07 22:29 ` [Buildroot] [PATCH v2 2/5] freescale: genimage: Use the common genimage template Georges Savoundararadj
2016-09-11 21:28 ` Thomas Petazzoni
2016-09-07 22:29 ` [Buildroot] [PATCH v2 3/5] imx6sololiteevk: use " Georges Savoundararadj
2016-09-11 21:28 ` Thomas Petazzoni
2016-09-07 22:29 ` [Buildroot] [PATCH v2 4/5] imx6sololiteevk: use zImage Georges Savoundararadj
2016-09-11 21:28 ` Thomas Petazzoni
2016-09-07 22:29 ` [Buildroot] [PATCH v2 5/5] imx6dlsabresd: " Georges Savoundararadj
2016-09-11 21:28 ` Thomas Petazzoni
2016-09-11 21:27 ` [Buildroot] [PATCH v2 1/5] freescale: genimage: Factorize scripts Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160716124125.7ed46855@free-electrons.com \
--to=thomas.petazzoni@free-electrons.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.