Re: [PATCH 04/12] drm/i915: Reject mixing MST and SST/HDMI on the same digital port

[Daniel Vetter <daniel@ffwll.ch>]

On Thu, Jul 28, 2016 at 05:50:40PM +0300, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> We can't mix MST with SST/HDMI on the same physical port, so we'll need
> to reject such configurations in check_digital_port_conflicts(). Nothing
> else will prevent this as MST has its fake encoders and its own connectors
> so the cloning checks won't catch this.
> 
> The same digital port can be used multiple times, but only if all the
> encoders involved are MST encoders, so we only want to check MST vs.
> SST/HDMI, not MST vs. MST. And SST/HDMI vs. SST/HDMI we already check.
> 
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

I'd be awesome if we could have some testcases for this. We can e.g. try
to enable HDMI without it being connected (it'll fall back to dvi mode),
so could use that to try enabling both hdmi and dp or dp mst out of sheer
nastiness. I don't even think we need to check that it gets rejected
correctly, just trying to do such a modeset on a broken kernel should
result in plenty of fireworks in dmesg (state checker for sure will be
unhapy) to make it obvious it's broken. Aka would absolutely love if this
patch gained a Testcase: line. Either way:

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

> ---
>  drivers/gpu/drm/i915/intel_display.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index c4c1c85366de..a6699c76bef3 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -12305,6 +12305,7 @@ static bool check_digital_port_conflicts(struct drm_atomic_state *state)
>  	struct drm_device *dev = state->dev;
>  	struct drm_connector *connector;
>  	unsigned int used_ports = 0;
> +	unsigned int used_mst_ports = 0;
>  
>  	/*
>  	 * Walk the connector list instead of the encoder
> @@ -12341,11 +12342,20 @@ static bool check_digital_port_conflicts(struct drm_atomic_state *state)
>  				return false;
>  
>  			used_ports |= port_mask;
> +			break;
> +		case INTEL_OUTPUT_DP_MST:
> +			used_mst_ports |=
> +				1 << enc_to_mst(&encoder->base)->primary->port;
> +			break;
>  		default:
>  			break;
>  		}
>  	}
>  
> +	/* can't mix MST and SST/HDMI on the same port */
> +	if (used_ports & used_mst_ports)
> +		return false;
> +
>  	return true;
>  }
>  
> -- 
> 2.7.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx