[ 0.404887] pci 0000:02:00.0: bridge window [mem 0xfb800000-0xfbafffff] [ 0.404923] pci 0000:02:00.2: PCI bridge to [bus 04] [ 0.404964] pci 0000:00:1c.0: PCI bridge to [bus 02-04] [ 0.404991] pci 0000:00:1c.0: bridge window [mem 0xfb800000-0xfbafffff] [ 0.405026] pci 0000:00:1c.6: PCI bridge to [bus 05] [ 0.405052] pci 0000:00:1c.6: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.405086] pci 0000:00:1e.0: PCI bridge to [bus 06] [ 0.405110] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.405139] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.405173] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.405174] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.405175] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.405176] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.405178] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.405179] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.405180] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff window] [ 0.405181] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.405183] pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.405184] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.405185] pci_bus 0000:02: resource 1 [mem 0xfb800000-0xfbafffff] [ 0.405186] pci_bus 0000:03: resource 1 [mem 0xfb800000-0xfbafffff] [ 0.405188] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.405189] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 0.405190] pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.405191] pci_bus 0000:06: resource 4 [io 0x0000-0x03af window] [ 0.405192] pci_bus 0000:06: resource 5 [io 0x03e0-0x0cf7 window] [ 0.405193] pci_bus 0000:06: resource 6 [io 0x03b0-0x03df window] [ 0.405194] pci_bus 0000:06: resource 7 [io 0x0d00-0xffff window] [ 0.405196] pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.405197] pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.405198] pci_bus 0000:06: resource 10 [mem 0xbfa00000-0xffffffff window] [ 0.425395] NET: Registered protocol family 2 [ 0.443428] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.443779] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.443917] TCP: Hash tables configured (established 262144 bind 65536) [ 0.443955] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.444046] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.461394] NET: Registered protocol family 1 [ 0.467397] RPC: Registered named UNIX socket transport module. [ 0.467430] RPC: Registered udp transport module. [ 0.467458] RPC: Registered tcp transport module. [ 0.467492] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.467526] pmd_set_huge: Cannot satisfy [mem 0xfb400000-0xfb600000] with a huge-page mapping due to MTRR override. [ 0.467572] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling [ 0.467619] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.814600] PCI: CLS 64 bytes, default 64 [ 0.819398] DMAR: Host address width 36 [ 0.819427] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.819464] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.819512] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.819536] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.819573] DMAR: RMRR base: 0x000000bcbac000 end: 0x000000bcbbafff [ 0.819596] DMAR: RMRR base: 0x000000bd800000 end: 0x000000bf9fffff [ 0.819625] DMAR: No ATSR found [ 0.819886] DMAR: dmar0: Using Queued invalidation [ 0.819916] DMAR: dmar1: Using Queued invalidation [ 0.820165] DMAR: Setting RMRR: [ 0.820215] DMAR: Setting identity map for device 0000:00:02.0 [0xbd800000 - 0xbf9fffff] [ 0.820447] DMAR: Setting identity map for device 0000:00:1a.0 [0xbcbac000 - 0xbcbbafff] [ 0.820513] DMAR: Setting identity map for device 0000:00:1d.0 [0xbcbac000 - 0xbcbbafff] [ 0.820558] DMAR: Prepare 0-16MiB unity mapping for LPC [ 0.820603] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 0.820847] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.820922] iommu: Adding device 0000:00:00.0 to group 0 [ 0.820962] iommu: Adding device 0000:00:01.0 to group 1 [ 0.820990] iommu: Adding device 0000:00:02.0 to group 2 [ 0.821025] iommu: Adding device 0000:00:16.0 to group 3 [ 0.821052] iommu: Adding device 0000:00:16.2 to group 3 [ 0.821080] iommu: Adding device 0000:00:16.3 to group 3 [ 0.821108] iommu: Adding device 0000:00:19.0 to group 4 [ 0.821136] iommu: Adding device 0000:00:1a.0 to group 5 [ 0.821842] iommu: Adding device 0000:00:1b.0 to group 6 [ 0.821871] iommu: Adding device 0000:00:1c.0 to group 7 [ 0.821899] iommu: Adding device 0000:00:1c.6 to group 8 [ 0.821928] iommu: Adding device 0000:00:1d.0 to group 9 [ 0.821957] iommu: Adding device 0000:00:1e.0 to group 10 [ 0.821992] iommu: Adding device 0000:00:1f.0 to group 11 [ 0.822021] iommu: Adding device 0000:00:1f.2 to group 11 [ 0.822049] iommu: Adding device 0000:00:1f.3 to group 11 [ 0.822074] iommu: Adding device 0000:01:00.0 to group 1 [ 0.822099] iommu: Adding device 0000:01:00.1 to group 1 [ 0.822132] iommu: Adding device 0000:02:00.0 to group 12 [ 0.822161] iommu: Adding device 0000:02:00.2 to group 12 [ 0.822185] iommu: Adding device 0000:03:0e.0 to group 12 [ 0.822214] iommu: Adding device 0000:05:00.0 to group 13 [ 0.822239] iommu: Adding device 0000:06:00.0 to group 10 [ 0.822264] iommu: Adding device 0000:06:00.1 to group 10 [ 0.823425] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 0.823461] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 0.823484] RAPL PMU: hw unit of domain package 2^-16 Joules [ 0.823506] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 0.846544] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.846587] audit: initializing netlink subsys (disabled) [ 0.846617] audit: type=2000 audit(1470037650.837:1): initialized [ 0.846866] workingset: timestamp_bits=60 max_order=23 bucket_order=0 [ 0.846899] zbud: loaded [ 0.959402] NILFS version 2 loaded [ 0.970417] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.970469] io scheduler noop registered [ 0.970500] io scheduler deadline registered [ 0.974400] io scheduler cfq registered (default) [ 0.974767] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.974809] ACPI: Power Button [PWRB] [ 0.974857] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.974898] ACPI: Power Button [PWRF] [ 0.975058] Monitor-Mwait will be used to enter C-2 state [ 0.975061] Monitor-Mwait will be used to enter C-3 state [ 0.975817] Linux agpgart interface v0.103 [ 0.975863] [drm] Initialized drm 1.1.0 20060810 [ 0.980818] [drm] DMAR active, disabling use of stolen memory [ 0.980842] [drm] Memory usable by graphics device = 2048M [ 0.980865] [drm] VT-d active for gfx access [ 0.980885] [drm] Disabling PPGTT because VT-d is on [ 0.980907] [drm] Replacing VGA console driver [ 0.981415] Console: switching to colour dummy device 80x25 [ 0.987472] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.987480] [drm] Driver supports precise vblank timestamp query. [ 0.989667] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 0.993003] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0 [ 0.994285] loop: module loaded [ 0.999606] Adaptec aacraid driver 1.2-1[41066]-ms [ 0.999812] aacraid 0000:03:0e.0: Changed firmware to INTX mode [ 1.203668] AAC0: kernel 5.2-0[17342] Aug 4 2010 [ 1.203672] AAC0: monitor 5.2-0[17342] [ 1.203675] AAC0: bios 5.2-0[17342] [ 1.203678] AAC0: serial 7C36110C3E2 [ 1.203680] AAC0: Non-DASD support enabled. [ 1.203682] AAC0: 64bit support enabled. [ 1.203685] AAC0: 64 Bit DAC enabled [ 1.210846] scsi host0: aacraid [ 1.211129] ahci 0000:00:1f.2: version 3.0 [ 1.221344] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.221351] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst [ 1.231776] scsi host1: ahci [ 1.231871] scsi host2: ahci [ 1.231953] scsi host3: ahci [ 1.232047] scsi host4: ahci [ 1.232132] scsi host5: ahci [ 1.232216] scsi host6: ahci [ 1.232266] ata1: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25100 irq 28 [ 1.232272] ata2: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25180 irq 28 [ 1.232277] ata3: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25200 irq 28 [ 1.232284] ata4: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25280 irq 28 [ 1.232289] ata5: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25300 irq 28 [ 1.232295] ata6: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25380 irq 28 [ 1.232341] tun: Universal TUN/TAP device driver, 1.6 [ 1.232343] tun: (C) 1999-2004 Max Krasnyansky [ 1.232383] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.232386] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.232533] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.281141] fbcon: inteldrmfb (fb0) is primary device [ 1.333233] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.434814] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:54:74:d1 [ 1.434815] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.434867] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 1.434984] VFIO - User Level meta-driver version: 0.3 [ 1.435269] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=none [ 1.445444] vfio_pci: add [1002:9460[ffff:ffff]] class 0x000000/00000000 [ 1.456438] vfio_pci: add [1002:aa30[ffff:ffff]] class 0x000000/00000000 [ 1.467446] vfio_pci: add [8086:1c26[ffff:ffff]] class 0x000000/00000000 [ 1.467448] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.467448] ehci-pci: EHCI PCI platform driver [ 1.467563] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.467569] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.467582] ehci-pci 0000:00:1a.0: debug port 2 [ 1.471483] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.471492] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbe27000 [ 1.477445] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.477625] hub 1-0:1.0: USB hub found [ 1.477631] hub 1-0:1.0: 3 ports detected [ 1.477722] ehci-platform: EHCI generic platform driver [ 1.477730] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.477733] ohci-pci: OHCI PCI platform driver [ 1.477740] ohci-platform: OHCI generic platform driver [ 1.477745] uhci_hcd: USB Universal Host Controller Interface driver [ 1.477800] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 1.477803] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2 [ 1.478009] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 1.478289] hub 2-0:1.0: USB hub found [ 1.478300] hub 2-0:1.0: 2 ports detected [ 1.478365] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 1.478367] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3 [ 1.481397] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.481538] hub 3-0:1.0: USB hub found [ 1.481549] hub 3-0:1.0: 2 ports detected [ 1.481632] usbcore: registered new interface driver cdc_acm [ 1.481633] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.481647] usbcore: registered new interface driver usb-storage [ 1.481659] usbcore: registered new interface driver usbserial [ 1.481665] usbcore: registered new interface driver ftdi_sio [ 1.481669] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.481709] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.484924] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.484928] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.485055] mousedev: PS/2 mouse device common for all mice [ 1.485230] rtc_cmos 00:02: RTC can wake from S4 [ 1.485355] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.485384] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.485390] md: raid0 personality registered for level 0 [ 1.485390] md: raid1 personality registered for level 1 [ 1.491555] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.491566] hidraw: raw HID events driver (C) Jiri Kosina [ 1.517875] Netfilter messages via NETLINK v0.30. [ 1.517881] nf_tables: (c) 2007-2009 Patrick McHardy [ 1.517882] nf_tables_compat: (c) 2012 Pablo Neira Ayuso [ 1.517919] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.517935] NET: Registered protocol family 17 [ 1.517939] NET: Registered protocol family 37 [ 1.518093] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28 [ 1.518098] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28 [ 1.518101] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28 [ 1.518108] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28 [ 1.518127] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.518133] AVX version of gcm_enc/dec engaged. [ 1.518133] AES CTR mode by8 optimization enabled [ 1.518533] registered taskstats version 1 [ 1.518544] zswap: loaded using pool lzo/zbud [ 1.535008] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.535078] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.535096] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.535532] ata1.00: ATA-8: KINGSTON SNV425S264GB, C091126a, max UDMA/100 [ 1.535534] ata1.00: 125045424 sectors, multi 16: LBA48 [ 1.535925] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.536031] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.536046] ata1.00: configured for UDMA/100 [ 1.536147] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.536164] ata3.00: ATA-8: ST3500418AS, CC49, max UDMA/133 [ 1.536166] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.537241] ata5.00: NCQ Send/Recv Log not supported [ 1.537242] ata5.00: ATA-9: SAMSUNG MZMTD128HAFV-000, DXT41K0Q, max UDMA/133 [ 1.537243] ata5.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.537340] ata2.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133 [ 1.537341] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.537485] ata6.00: HPA detected: current 976771055, native 976773168 [ 1.537488] ata6.00: ATA-8: ST3500320AS, SD1A, max UDMA/133 [ 1.537489] ata6.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.537528] ata3.00: configured for UDMA/133 [ 1.537656] ata5.00: NCQ Send/Recv Log not supported [ 1.537727] ata5.00: configured for UDMA/133 [ 1.539084] ata4.00: ATA-8: WDC WD7500BPKT-22PK4T0, 01.01A01, max UDMA/133 [ 1.539086] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.539457] ata6.00: configured for UDMA/133 [ 1.539971] ata2.00: configured for UDMA/133 [ 1.541613] ata4.00: configured for UDMA/133 [ 1.598430] Btrfs loaded, crc32c=crc32c-generic [ 1.598430] BTRFS: selftest: sectorsize: 4096 nodesize: 4096 [ 1.598431] BTRFS: selftest: sectorsize: 4096 nodesize: 8192 [ 1.598431] BTRFS: selftest: sectorsize: 4096 nodesize: 16384 [ 1.598431] BTRFS: selftest: sectorsize: 4096 nodesize: 32768 [ 1.598432] BTRFS: selftest: sectorsize: 4096 nodesize: 65536 [ 1.598626] Key type encrypted registered [ 1.599106] rtc_cmos 00:02: setting system clock to 2016-08-01 07:47:32 UTC (1470037652) [ 1.599154] ALSA device list: [ 1.599154] #0: SB Live! 5.1 (rev.10, serial:0x80641102) at 0xd000, irq 16 [ 1.630687] Console: switching to colour frame buffer device 240x67 [ 1.713978] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.718547] scsi 1:0:0:0: Direct-Access ATA KINGSTON SNV425S 126a PQ: 0 ANSI: 5 [ 1.730563] sd 1:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 1.730637] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.730794] scsi 2:0:0:0: Direct-Access ATA WDC WD7500BPKT-7 1A01 PQ: 0 ANSI: 5 [ 1.734217] sd 1:0:0:0: [sda] Write Protect is off [ 1.735443] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.735451] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.740005] sda: sda1 sda2 sda3 sda4 [ 1.741490] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.744541] sd 2:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 1.744552] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.744657] scsi 3:0:0:0: Direct-Access ATA ST3500418AS CC49 PQ: 0 ANSI: 5 [ 1.748289] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 1.749545] sd 2:0:0:0: [sdb] Write Protect is off [ 1.750782] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.750789] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.756528] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.756609] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.756840] scsi 4:0:0:0: Direct-Access ATA WDC WD7500BPKT-2 1A01 PQ: 0 ANSI: 5 [ 1.760299] sd 3:0:0:0: [sdc] Write Protect is off [ 1.761573] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.761579] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.768542] sd 4:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 1.768557] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 1.768640] scsi 5:0:0:0: Direct-Access ATA SAMSUNG MZMTD128 1K0Q PQ: 0 ANSI: 5 [ 1.772503] sd 4:0:0:0: [sdd] 4096-byte physical blocks [ 1.773848] sd 4:0:0:0: [sdd] Write Protect is off [ 1.775164] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.775169] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.779421] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.782533] sd 5:0:0:0: [sde] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.782558] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 1.782667] scsi 6:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5 [ 1.782809] sdc: sdc1 sdc2 sdc3 sdc4 [ 1.783097] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.789403] sd 5:0:0:0: [sde] Write Protect is off [ 1.790784] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.790792] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.795518] sd 6:0:0:0: [sdf] 976771055 512-byte logical blocks: (500 GB/466 GiB) [ 1.795528] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 1.796249] sde: sde1 [ 1.796349] sd 5:0:0:0: [sde] Attached SCSI removable disk [ 1.801138] sd 6:0:0:0: [sdf] Write Protect is off [ 1.802533] sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1.802539] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.811867] sdf: sdf1 sdf2 sdf3 sdf4 [ 1.813571] sd 6:0:0:0: [sdf] Attached SCSI removable disk [ 1.843418] tsc: Refined TSC clocksource calibration: 3092.973 MHz [ 1.844867] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c95594edb3, max_idle_ns: 440795220223 ns [ 1.895343] hub 1-1:1.0: USB hub found [ 1.897027] hub 1-1:1.0: 6 ports detected [ 2.123348] sdb: sdb1 [ 2.124918] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.174450] usb 1-1.5: new high-speed USB device number 3 using ehci-pci [ 2.178183] sdd: sdd1 [ 2.179797] sd 4:0:0:0: [sdd] Attached SCSI disk [ 2.181272] md: Waiting for all devices to be available before autodetect [ 2.182728] md: If you don't use raid, use raid=noautodetect [ 2.184311] md: Autodetecting RAID arrays. [ 2.203450] AAC: Host adapter dead -1 [ 2.207022] md: invalid raid superblock magic on sdc3 [ 2.208518] md: sdc3 does not have a valid v0.90 superblock, not importing! [ 2.251598] hub 1-1.5:1.0: USB hub found [ 2.253070] md: invalid raid superblock magic on sdf3 [ 2.253071] md: sdf3 does not have a valid v0.90 superblock, not importing! [ 2.256207] hub 1-1.5:1.0: 4 ports detected [ 2.269772] md: Scanned 8 and added 6 devices. [ 2.271324] md: autorun ... [ 2.272824] md: considering sdf4 ... [ 2.274318] md: adding sdf4 ... [ 2.275797] md: sdf2 has different UUID to sdf4 [ 2.277272] md: sdf1 has different UUID to sdf4 [ 2.278732] md: adding sdc4 ... [ 2.280178] md: sdc2 has different UUID to sdf4 [ 2.281618] md: sdc1 has different UUID to sdf4 [ 2.283144] md: created md124 [ 2.284553] md: bind [ 2.285949] md: bind [ 2.287331] md: running: [ 2.288856] md/raid1:md124: active with 2 out of 2 mirrors [ 2.290236] md124: detected capacity change from 0 to 464588374016 [ 2.291603] md: considering sdf2 ... [ 2.292955] md: adding sdf2 ... [ 2.294294] md: sdf1 has different UUID to sdf2 [ 2.295620] md: adding sdc2 ... [ 2.296948] md: sdc1 has different UUID to sdf2 [ 2.298369] md: created md1 [ 2.299689] md: bind [ 2.300991] md: bind [ 2.302273] md: running: [ 2.303732] md/raid1:md1: active with 2 out of 2 mirrors [ 2.305014] md1: detected capacity change from 0 to 34365112320 [ 2.306282] md: considering sdf1 ... [ 2.307535] md: adding sdf1 ... [ 2.308772] md: adding sdc1 ... [ 2.309989] md: created md0 [ 2.311203] md: bind [ 2.312410] md: bind [ 2.313641] md: running: [ 2.315109] md/raid1:md0: active with 2 out of 2 mirrors [ 2.316304] md0: detected capacity change from 0 to 65667072 [ 2.317478] md: ... autorun DONE. [ 2.319890] NILFS: Can't find nilfs on dev sda4. [ 2.321985] BTRFS: device label RUT devid 1 transid 54387 /dev/root [ 2.323982] BTRFS info (device sda4): disk space caching is enabled [ 2.325178] BTRFS info (device sda4): has skinny extents [ 2.339424] usb 1-1.6: new low-speed USB device number 4 using ehci-pci [ 2.352779] BTRFS info (device sda4): detected SSD devices, enabling SSD mode [ 2.362434] VFS: Mounted root (btrfs filesystem) on device 0:14. [ 2.364343] Freeing unused kernel memory: 880K (ffffffff81c81000 - ffffffff81d5d000) [ 2.365521] Write protecting the kernel read-only data: 12288k [ 2.366938] Freeing unused kernel memory: 228K (ffff8800017c7000 - ffff880001800000) [ 2.370605] Freeing unused kernel memory: 1500K (ffff880001a89000 - ffff880001c00000) [ 2.532437] usb 1-1.5.1: new full-speed USB device number 5 using ehci-pci [ 2.819844] random: systemd-udevd urandom read with 31 bits of entropy available [ 2.846895] clocksource: Switched to clocksource tsc [ 2.867009] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.870480] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 2.887588] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.889780] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.891138] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C31C.0001/input/input5 [ 2.912371] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 17, base_baud = 115200) is a 16550A [ 2.941479] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1.6/input0 [ 2.947706] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C31C.0002/input/input6 [ 2.998608] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1.6/input1 [ 3.001963] input: Telink 2.4G Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/0003:248A:8366.0003/input/input7 [ 3.005051] BTRFS: device label RUT devid 1 transid 177468 /dev/sda2 [ 3.011705] md: bind [ 3.013792] md: bind [ 3.017028] md/raid0:md2: md_size is 4235264 sectors. [ 3.017031] md: RAID0 configuration for md2 - 1 zone [ 3.017032] md: zone0=[sdc3/sdf3] [ 3.017035] zone-offset= 0KB, device-offset= 0KB, size= 2117632KB [ 3.017046] md2: detected capacity change from 0 to 2168455168 [ 3.052588] hid-generic 0003:248A:8366.0003: input,hidraw2: USB HID v1.11 Mouse [Telink 2.4G Mouse] on usb-0000:00:1a.0-1.5.1/input0 [ 3.052606] usbcore: registered new interface driver usbhid [ 3.052607] usbhid: USB HID core driver [ 3.070835] BTRFS: device label STORAZ devid 1 transid 2876 /dev/sdb1 [ 3.080198] BTRFS: device label STORAZ devid 2 transid 2876 /dev/sdd1 [ 3.098429] AAC: Host adapter dead -1 [ 4.893589] Adding 2117628k swap on /dev/md2. Priority:1 extents:1 across:2117628k FS [ 4.895065] Adding 2097148k swap on /dev/sda3. Priority:5 extents:1 across:2097148k SSFS [ 4.973960] EXT4-fs (md124): mounted filesystem with ordered data mode. Opts: (null) [ 5.012151] BTRFS info (device sdd1): use lzo compression [ 5.012156] BTRFS info (device sdd1): disk space caching is enabled [ 5.012158] BTRFS info (device sdd1): has skinny extents [ 6.607468] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28 [ 6.608154] microcode: CPU0 updated to revision 0x29, date = 2013-06-12 [ 6.608420] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28 [ 6.608833] microcode: CPU1 updated to revision 0x29, date = 2013-06-12 [ 6.609130] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28 [ 6.609538] microcode: CPU2 updated to revision 0x29, date = 2013-06-12 [ 6.609831] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28 [ 6.610240] microcode: CPU3 updated to revision 0x29, date = 2013-06-12 [ 7.661464] NET: Registered protocol family 10 [ 7.661866] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 9.970839] random: nonblocking pool is initialized [ 10.700517] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 10.700568] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 13.098488] AAC: Host adapter dead -1 [ 13.491516] AAC: Host adapter dead -1 [ 23.491563] AAC: Host adapter dead -1 [ 33.491651] AAC: Host adapter dead -1 [ 43.491711] AAC: Host adapter dead -1 [ 53.491777] AAC: Host adapter dead -1 [ 63.491839] AAC: Host adapter dead -1 [ 73.491882] AAC: Host adapter dead -1 [ 83.491969] AAC: Host adapter dead -1