[ 0.409490] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.409491] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 0.409493] pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.409494] pci_bus 0000:06: resource 4 [io 0x0000-0x03af window] [ 0.409495] pci_bus 0000:06: resource 5 [io 0x03e0-0x0cf7 window] [ 0.409496] pci_bus 0000:06: resource 6 [io 0x03b0-0x03df window] [ 0.409497] pci_bus 0000:06: resource 7 [io 0x0d00-0xffff window] [ 0.409499] pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.409500] pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.409501] pci_bus 0000:06: resource 10 [mem 0xbfa00000-0xffffffff window] [ 0.430673] NET: Registered protocol family 2 [ 0.449709] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.450059] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.450196] TCP: Hash tables configured (established 262144 bind 65536) [ 0.450234] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.450321] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.467674] NET: Registered protocol family 1 [ 0.473678] RPC: Registered named UNIX socket transport module. [ 0.473709] RPC: Registered udp transport module. [ 0.473737] RPC: Registered tcp transport module. [ 0.473771] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.473811] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling [ 0.473859] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.819902] PCI: CLS 64 bytes, default 64 [ 0.824701] DMAR: Host address width 36 [ 0.824729] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.824766] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.824815] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.824839] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.824876] DMAR: RMRR base: 0x000000bcbac000 end: 0x000000bcbbafff [ 0.824900] DMAR: RMRR base: 0x000000bd800000 end: 0x000000bf9fffff [ 0.824929] DMAR: No ATSR found [ 0.825193] DMAR: dmar0: Using Queued invalidation [ 0.825223] DMAR: dmar1: Using Queued invalidation [ 0.825473] DMAR: Setting RMRR: [ 0.825523] DMAR: Setting identity map for device 0000:00:02.0 [0xbd800000 - 0xbf9fffff] [ 0.825755] DMAR: Setting identity map for device 0000:00:1a.0 [0xbcbac000 - 0xbcbbafff] [ 0.825822] DMAR: Setting identity map for device 0000:00:1d.0 [0xbcbac000 - 0xbcbbafff] [ 0.825867] DMAR: Prepare 0-16MiB unity mapping for LPC [ 0.826572] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 0.826903] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.826981] iommu: Adding device 0000:00:00.0 to group 0 [ 0.827017] iommu: Adding device 0000:00:01.0 to group 1 [ 0.827047] iommu: Adding device 0000:00:02.0 to group 2 [ 0.827082] iommu: Adding device 0000:00:16.0 to group 3 [ 0.827110] iommu: Adding device 0000:00:16.2 to group 3 [ 0.827138] iommu: Adding device 0000:00:16.3 to group 3 [ 0.827166] iommu: Adding device 0000:00:19.0 to group 4 [ 0.827195] iommu: Adding device 0000:00:1a.0 to group 5 [ 0.827223] iommu: Adding device 0000:00:1b.0 to group 6 [ 0.827252] iommu: Adding device 0000:00:1c.0 to group 7 [ 0.827280] iommu: Adding device 0000:00:1c.6 to group 8 [ 0.827309] iommu: Adding device 0000:00:1d.0 to group 9 [ 0.827337] iommu: Adding device 0000:00:1e.0 to group 10 [ 0.827372] iommu: Adding device 0000:00:1f.0 to group 11 [ 0.827401] iommu: Adding device 0000:00:1f.2 to group 11 [ 0.827430] iommu: Adding device 0000:00:1f.3 to group 11 [ 0.827455] iommu: Adding device 0000:01:00.0 to group 1 [ 0.827480] iommu: Adding device 0000:01:00.1 to group 1 [ 0.827514] iommu: Adding device 0000:02:00.0 to group 12 [ 0.827543] iommu: Adding device 0000:02:00.2 to group 12 [ 0.827568] iommu: Adding device 0000:03:0e.0 to group 12 [ 0.827596] iommu: Adding device 0000:05:00.0 to group 13 [ 0.827621] iommu: Adding device 0000:06:00.0 to group 10 [ 0.827646] iommu: Adding device 0000:06:00.1 to group 10 [ 0.828766] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 0.828803] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 0.828826] RAPL PMU: hw unit of domain package 2^-16 Joules [ 0.828848] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 0.852848] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.852888] audit: initializing netlink subsys (disabled) [ 0.852916] audit: type=2000 audit(1470735632.840:1): initialized [ 0.853164] workingset: timestamp_bits=60 max_order=23 bucket_order=0 [ 0.853198] zbud: loaded [ 0.963713] NILFS version 2 loaded [ 0.974722] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.974773] io scheduler noop registered [ 0.974806] io scheduler deadline registered [ 0.978718] io scheduler cfq registered (default) [ 0.979150] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.979176] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.979200] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 0.979226] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 0.979251] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.979276] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.979300] pci 0000:03:0e.0: Signaling PME through PCIe PME interrupt [ 0.979324] pci 0000:02:00.2: Signaling PME through PCIe PME interrupt [ 0.979351] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded [ 0.979376] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt [ 0.979401] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 0.979428] pcie_pme 0000:00:1c.6:pcie001: service driver pcie_pme loaded [ 0.979483] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.979526] ACPI: Power Button [PWRB] [ 0.979573] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.979616] ACPI: Power Button [PWRF] [ 0.979803] Monitor-Mwait will be used to enter C-2 state [ 0.979811] Monitor-Mwait will be used to enter C-3 state [ 0.980556] Linux agpgart interface v0.103 [ 0.980600] [drm] Initialized drm 1.1.0 20060810 [ 0.987137] [drm] DMAR active, disabling use of stolen memory [ 0.987162] [drm] Memory usable by graphics device = 2048M [ 0.987184] [drm] VT-d active for gfx access [ 0.987205] [drm] Disabling PPGTT because VT-d is on [ 0.987227] [drm] Replacing VGA console driver [ 0.987747] Console: switching to colour dummy device 80x25 [ 0.993786] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.993793] [drm] Driver supports precise vblank timestamp query. [ 0.995906] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 0.999041] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0 [ 1.000197] loop: module loaded [ 1.005643] ahci 0000:00:1f.2: version 3.0 [ 1.015852] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.015865] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst [ 1.026206] scsi host0: ahci [ 1.026330] scsi host1: ahci [ 1.026442] scsi host2: ahci [ 1.026525] scsi host3: ahci [ 1.026609] scsi host4: ahci [ 1.026689] scsi host5: ahci [ 1.026757] ata1: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25100 irq 31 [ 1.026763] ata2: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25180 irq 31 [ 1.026769] ata3: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25200 irq 31 [ 1.026775] ata4: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25280 irq 31 [ 1.026780] ata5: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25300 irq 31 [ 1.026786] ata6: SATA max UDMA/133 abar m2048@0xfbe25000 port 0xfbe25380 irq 31 [ 1.026824] tun: Universal TUN/TAP device driver, 1.6 [ 1.026827] tun: (C) 1999-2004 Max Krasnyansky [ 1.026872] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.026875] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.026989] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.127982] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.224919] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:54:74:d1 [ 1.224925] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.224977] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 1.225019] VFIO - User Level meta-driver version: 0.3 [ 1.225108] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=none [ 1.235739] vfio_pci: add [1002:9460[ffff:ffff]] class 0x000000/00000000 [ 1.246738] vfio_pci: add [1002:aa30[ffff:ffff]] class 0x000000/00000000 [ 1.257728] vfio_pci: add [8086:1c26[ffff:ffff]] class 0x000000/00000000 [ 1.257732] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.257735] ehci-pci: EHCI PCI platform driver [ 1.257802] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.257809] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.257826] ehci-pci 0000:00:1a.0: debug port 2 [ 1.261734] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.261743] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbe27000 [ 1.267733] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.267841] hub 1-0:1.0: USB hub found [ 1.267847] hub 1-0:1.0: 3 ports detected [ 1.267942] ehci-platform: EHCI generic platform driver [ 1.267953] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.267959] ohci-pci: OHCI PCI platform driver [ 1.267969] ohci-platform: OHCI generic platform driver [ 1.267978] uhci_hcd: USB Universal Host Controller Interface driver [ 1.268032] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 1.268038] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2 [ 1.268254] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 1.268476] hub 2-0:1.0: USB hub found [ 1.268486] hub 2-0:1.0: 2 ports detected [ 1.268547] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 1.268551] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3 [ 1.271632] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.271708] hub 3-0:1.0: USB hub found [ 1.271719] hub 3-0:1.0: 2 ports detected [ 1.271805] usbcore: registered new interface driver cdc_acm [ 1.271808] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.271826] usbcore: registered new interface driver usb-storage [ 1.271843] usbcore: registered new interface driver usbserial [ 1.271851] usbcore: registered new interface driver ftdi_sio [ 1.271859] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.271918] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.274897] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.274902] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.274986] mousedev: PS/2 mouse device common for all mice [ 1.275103] rtc_cmos 00:02: RTC can wake from S4 [ 1.275226] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.275255] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.275265] md: raid0 personality registered for level 0 [ 1.275267] md: raid1 personality registered for level 1 [ 1.278754] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.278769] hidraw: raw HID events driver (C) Jiri Kosina [ 1.286686] fbcon: inteldrmfb (fb0) is primary device [ 1.305279] Netfilter messages via NETLINK v0.30. [ 1.305285] nf_tables: (c) 2007-2009 Patrick McHardy [ 1.305285] nf_tables_compat: (c) 2012 Pablo Neira Ayuso [ 1.305325] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.305341] NET: Registered protocol family 17 [ 1.305344] NET: Registered protocol family 37 [ 1.305500] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28 [ 1.305506] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28 [ 1.305512] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28 [ 1.305518] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28 [ 1.305538] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.305542] AVX version of gcm_enc/dec engaged. [ 1.305543] AES CTR mode by8 optimization enabled [ 1.305942] registered taskstats version 1 [ 1.305952] zswap: loaded using pool lzo/zbud [ 1.330058] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.330078] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.330098] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.330144] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.330188] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.330669] ata1.00: ATA-8: KINGSTON SNV425S264GB, C091126a, max UDMA/100 [ 1.330672] ata1.00: 125045424 sectors, multi 16: LBA48 [ 1.331220] ata1.00: configured for UDMA/100 [ 1.331285] ata3.00: ATA-8: ST3500418AS, CC49, max UDMA/133 [ 1.331286] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.331346] ata5.00: NCQ Send/Recv Log not supported [ 1.331347] ata5.00: ATA-9: SAMSUNG MZMTD128HAFV-000, DXT41K0Q, max UDMA/133 [ 1.331347] ata5.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.331667] ata6.00: HPA detected: current 976771055, native 976773168 [ 1.331672] ata6.00: ATA-8: ST3500320AS, SD1A, max UDMA/133 [ 1.331673] ata6.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.331752] ata5.00: NCQ Send/Recv Log not supported [ 1.331860] ata5.00: configured for UDMA/133 [ 1.332401] ata2.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133 [ 1.332402] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.332582] ata3.00: configured for UDMA/133 [ 1.333647] ata6.00: configured for UDMA/133 [ 1.334588] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.335125] ata2.00: configured for UDMA/133 [ 1.336995] ata4.00: ATA-8: WDC WD7500BPKT-22PK4T0, 01.01A01, max UDMA/133 [ 1.336997] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.340260] ata4.00: configured for UDMA/133 [ 1.388914] Btrfs loaded, crc32c=crc32c-generic [ 1.388914] BTRFS: selftest: sectorsize: 4096 nodesize: 4096 [ 1.388915] BTRFS: selftest: sectorsize: 4096 nodesize: 8192 [ 1.388915] BTRFS: selftest: sectorsize: 4096 nodesize: 16384 [ 1.388916] BTRFS: selftest: sectorsize: 4096 nodesize: 32768 [ 1.388916] BTRFS: selftest: sectorsize: 4096 nodesize: 65536 [ 1.389593] Key type encrypted registered [ 1.390140] rtc_cmos 00:02: setting system clock to 2016-08-09 09:40:34 UTC (1470735634) [ 1.390189] ALSA device list: [ 1.390190] #0: SB Live! 5.1 (rev.10, serial:0x80641102) at 0xd000, irq 16 [ 1.569754] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.644562] Console: switching to colour frame buffer device 240x67 [ 1.663425] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.667912] scsi 0:0:0:0: Direct-Access ATA KINGSTON SNV425S 126a PQ: 0 ANSI: 5 [ 1.682920] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 1.682929] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.683004] scsi 1:0:0:0: Direct-Access ATA WDC WD7500BPKT-7 1A01 PQ: 0 ANSI: 5 [ 1.684482] hub 1-1:1.0: USB hub found [ 1.684561] hub 1-1:1.0: 6 ports detected [ 1.688553] sd 0:0:0:0: [sda] Write Protect is off [ 1.689678] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.689686] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.693361] sda: sda1 sda2 sda3 sda4 [ 1.694726] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.694838] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 1.694839] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.694848] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.694850] sd 1:0:0:0: [sdb] Write Protect is off [ 1.694851] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.694857] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.694928] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC49 PQ: 0 ANSI: 5 [ 1.710924] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.710935] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.711007] scsi 3:0:0:0: Direct-Access ATA WDC WD7500BPKT-2 1A01 PQ: 0 ANSI: 5 [ 1.714479] sd 2:0:0:0: [sdc] Write Protect is off [ 1.715685] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.715693] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.721891] sd 3:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 1.721926] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.722030] scsi 4:0:0:0: Direct-Access ATA SAMSUNG MZMTD128 1K0Q PQ: 0 ANSI: 5 [ 1.725245] sdc: sdc1 sdc2 sdc3 sdc4 [ 1.725496] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.728045] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 1.729288] sd 3:0:0:0: [sdd] Write Protect is off [ 1.730526] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.730532] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.741909] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 1.741916] sd 4:0:0:0: [sde] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.741932] sd 4:0:0:0: [sde] Write Protect is off [ 1.741933] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.741939] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.747155] scsi 5:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5 [ 1.748767] sde: sde1 [ 1.750159] sd 4:0:0:0: [sde] Attached SCSI removable disk [ 1.759881] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 1.759895] sd 5:0:0:0: [sdf] 976771055 512-byte logical blocks: (500 GB/466 GiB) [ 1.759909] sd 5:0:0:0: [sdf] Write Protect is off [ 1.759910] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1.759916] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.767958] sdf: sdf1 sdf2 sdf3 sdf4 [ 1.769504] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 1.849790] tsc: Refined TSC clocksource calibration: 3092.975 MHz [ 1.851154] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955bbc01b, max_idle_ns: 440795312352 ns [ 1.958801] usb 1-1.5: new high-speed USB device number 3 using ehci-pci [ 2.045517] hub 1-1.5:1.0: USB hub found [ 2.047031] hub 1-1.5:1.0: 4 ports detected [ 2.072793] sdb: sdb1 [ 2.074333] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.121817] usb 1-1.6: new low-speed USB device number 4 using ehci-pci [ 2.127049] sdd: sdd1 [ 2.128570] sd 3:0:0:0: [sdd] Attached SCSI disk [ 2.129975] md: Waiting for all devices to be available before autodetect [ 2.131322] md: If you don't use raid, use raid=noautodetect [ 2.132857] md: Autodetecting RAID arrays. [ 2.157893] md: invalid raid superblock magic on sdc3 [ 2.159279] md: sdc3 does not have a valid v0.90 superblock, not importing! [ 2.209367] md: invalid raid superblock magic on sdf3 [ 2.210768] md: sdf3 does not have a valid v0.90 superblock, not importing! [ 2.234421] md: Scanned 8 and added 6 devices. [ 2.235847] md: autorun ... [ 2.237248] md: considering sdf4 ... [ 2.238642] md: adding sdf4 ... [ 2.240027] md: sdf2 has different UUID to sdf4 [ 2.241408] md: sdf1 has different UUID to sdf4 [ 2.242771] md: adding sdc4 ... [ 2.244127] md: sdc2 has different UUID to sdf4 [ 2.245476] md: sdc1 has different UUID to sdf4 [ 2.247052] md: created md124 [ 2.248359] md: bind [ 2.249659] md: bind [ 2.250959] md: running: [ 2.252473] md/raid1:md124: active with 2 out of 2 mirrors [ 2.253788] md124: detected capacity change from 0 to 464588374016 [ 2.255102] md: considering sdf2 ... [ 2.256395] md: adding sdf2 ... [ 2.257674] md: sdf1 has different UUID to sdf2 [ 2.258953] md: adding sdc2 ... [ 2.260215] md: sdc1 has different UUID to sdf2 [ 2.261609] md: created md1 [ 2.262883] md: bind [ 2.264147] md: bind [ 2.265390] md: running: [ 2.266727] md/raid1:md1: active with 2 out of 2 mirrors [ 2.267975] md1: detected capacity change from 0 to 34365112320 [ 2.269202] md: considering sdf1 ... [ 2.270405] md: adding sdf1 ... [ 2.271604] md: adding sdc1 ... [ 2.272784] md: created md0 [ 2.273952] md: bind [ 2.275110] md: bind [ 2.276250] md: running: [ 2.277619] md/raid1:md0: active with 2 out of 2 mirrors [ 2.278783] md0: detected capacity change from 0 to 65667072 [ 2.279939] md: ... autorun DONE. [ 2.282199] NILFS: Can't find nilfs on dev sda4. [ 2.284098] BTRFS: device label RUT devid 1 transid 58464 /dev/root [ 2.286050] BTRFS info (device sda4): disk space caching is enabled [ 2.287188] BTRFS info (device sda4): has skinny extents [ 2.314978] BTRFS info (device sda4): detected SSD devices, enabling SSD mode [ 2.321816] usb 1-1.5.1: new full-speed USB device number 5 using ehci-pci [ 2.324827] VFS: Mounted root (btrfs filesystem) on device 0:14. [ 2.326679] Freeing unused kernel memory: 880K (ffffffff81c80000 - ffffffff81d5c000) [ 2.327815] Write protecting the kernel read-only data: 12288k [ 2.329216] Freeing unused kernel memory: 268K (ffff8800017bd000 - ffff880001800000) [ 2.332847] Freeing unused kernel memory: 1504K (ffff880001a88000 - ffff880001c00000) [ 2.770417] random: systemd-udevd urandom read with 18 bits of entropy available [ 2.816223] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.821428] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 2.828940] Adaptec aacraid driver 1.2-1[41066]-ms [ 2.833422] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C31C.0001/input/input5 [ 2.834884] aacraid 0000:03:0e.0: Changed firmware to INTX mode [ 2.836816] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.861804] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 17, base_baud = 115200) is a 16550A [ 2.861844] clocksource: Switched to clocksource tsc [ 2.863573] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.883904] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1.6/input0 [ 2.890297] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C31C.0002/input/input6 [ 2.940911] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1.6/input1 [ 2.944192] input: Telink 2.4G Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/0003:248A:8366.0003/input/input7 [ 2.949580] BTRFS: device label RUT devid 1 transid 177468 /dev/sda2 [ 2.956799] md: bind [ 2.986496] md: bind [ 2.988783] md/raid0:md2: md_size is 4235264 sectors. [ 2.988785] md: RAID0 configuration for md2 - 1 zone [ 2.988786] md: zone0=[sdc3/sdf3] [ 2.988789] zone-offset= 0KB, device-offset= 0KB, size= 2117632KB [ 2.988796] md2: detected capacity change from 0 to 2168455168 [ 2.994994] hid-generic 0003:248A:8366.0003: input,hidraw2: USB HID v1.11 Mouse [Telink 2.4G Mouse] on usb-0000:00:1a.0-1.5.1/input0 [ 2.995014] usbcore: registered new interface driver usbhid [ 2.995016] usbhid: USB HID core driver [ 3.020381] BTRFS: device label STORAZ devid 1 transid 2997 /dev/sdb1 [ 3.021171] BTRFS: device label STORAZ devid 2 transid 2997 /dev/sdd1 [ 3.039181] AAC0: kernel 5.2-0[17342] Aug 4 2010 [ 3.039184] AAC0: monitor 5.2-0[17342] [ 3.039186] AAC0: bios 5.2-0[17342] [ 3.039189] AAC0: serial 7C36110C3E2 [ 3.039190] AAC0: Non-DASD support enabled. [ 3.039192] AAC0: 64bit support enabled. [ 3.039194] AAC0: 64 Bit DAC enabled [ 3.046330] scsi host6: aacraid [ 3.046702] scsi 6:0:0:0: Direct-Access Adaptec test V1.0 PQ: 0 ANSI: 2 [ 3.061048] scsi 6:1:4:0: Direct-Access APPLE HDD D70F PQ: 0 ANSI: 5 [ 3.088744] scsi 6:1:5:0: Direct-Access ST975042 3AS SDM1 PQ: 0 ANSI: 5 [ 3.205457] sd 6:0:0:0: [sdg] 2927624192 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 3.205464] sd 6:0:0:0: [sdg] Write Protect is off [ 3.205467] sd 6:0:0:0: [sdg] Mode Sense: 12 00 10 08 [ 3.205475] sd 6:0:0:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 3.205494] sd 6:0:0:0: Attached scsi generic sg6 type 0 [ 3.205613] scsi 6:1:4:0: Attached scsi generic sg7 type 0 [ 3.205720] scsi 6:1:5:0: Attached scsi generic sg8 type 0 [ 3.546739] sd 6:0:0:0: [sdg] Attached SCSI removable disk [ 3.720516] BTRFS: device fsid 125f10d2-fbad-46ed-a521-ad44a94b038a devid 1 transid 690 /dev/sdg [ 4.038945] AAC: Host adapter dead -1 [ 4.777959] Adding 2117628k swap on /dev/md2. Priority:1 extents:1 across:2117628k FS [ 4.779455] Adding 2097148k swap on /dev/sda3. Priority:5 extents:1 across:2097148k SSFS [ 4.890022] AAC: Host adapter dead -1 [ 4.929117] EXT4-fs (md124): mounted filesystem with ordered data mode. Opts: (null) [ 4.976454] BTRFS info (device sdd1): use lzo compression [ 4.976459] BTRFS info (device sdd1): disk space caching is enabled [ 4.976461] BTRFS info (device sdd1): has skinny extents [ 5.383037] AAC: Host adapter dead -1 [ 6.672006] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28 [ 6.672848] microcode: CPU0 updated to revision 0x29, date = 2013-06-12 [ 6.673152] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28 [ 6.673560] microcode: CPU1 updated to revision 0x29, date = 2013-06-12 [ 6.673853] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28 [ 6.674262] microcode: CPU2 updated to revision 0x29, date = 2013-06-12 [ 6.674554] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28 [ 6.674963] microcode: CPU3 updated to revision 0x29, date = 2013-06-12 [ 7.744198] NET: Registered protocol family 10 [ 7.744600] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 10.623514] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 10.623551] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 12.665816] random: nonblocking pool is initialized [ 15.383740] AAC: Host adapter dead -1 [ 25.384456] AAC: Host adapter dead -1