[PATCHv4 net-next 0/2] Add support for IFLA_VF_MAC

[PATCHv4 net-next 0/2] Add support for IFLA_VF_MAC

[Hariprasad Shenai]

Hi,

We're struggling to implement the PCI SR-IOV management features for
administering Virtual Functions which represent networking devices using
the current Linux APIs. The problem is that these APIs incorporate all
sorts of assumptions which don't match chelsio networking cards.

For instance, the current APIs assume a 1-to-1 mapping of Network Ports,
Physical Functions and the SR-IOV Virtual Functions of those Physical
Functions. This is not the case with our cards where any Virtual Function
can be hooked up to any Port -- or any number of Ports the current Linux
APIs also assume only 1 Network Interface/Port can be accessed per Virtuali
Function.

Another issue is that these APIs assume that the Administrative Driver is
attached to the Physical Function Associated with a Virtual Function. This
is not the case with our card where all administration is performed by a
Driver which is not attached to any of the Physical Functions which have
SR-IOV PCI Capabilities.

Another consequence of these assumptions is the inability to utilize all
of the cards SR-IOV resources. For instance, our cards have SR-IOV
Capabilities on Physical Functions 0..3 and the administrative Driver
attaches to Physical Function 4. Each of the Physical Functions 0..3 can
support up to 16 Virtual Functions. With the current Linux APIs, a 2-Port
card would only be able to use the Virtual Functions on Physical
Function 0..1 and not allow the Virtual Functions on Physical
Functions 2..3 to be used since there are no Ports 2..3 on a 2-Port card.

Patch 1/2 adds support to create management interface for each PF to control
thier corresponding VF's. Patch 2/2 adds support for ndo_set_vf_mac.

This patch series has been created against net-next tree.

We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.

V4: Handle memory allocation failure for adapter->mbox_log in init_one().
    Based on review comment by Yuval Mintz <Yuval.Mintz@qlogic.com>

V3: Based on review comment by Yuval Mintz, removed extra parameter pf
    added to IFLA_VF API's and created a net_device corresponding to
    each PF for controling their VF. Based on review comment by
    Yuval Mintz <Yuval.Mintz@qlogic.com>

V2: Fixed check for MAC address in Patch 2/2, based on review comment by
    Yuval Mintz <Yuval.Mintz@qlogic.com>

Hariprasad Shenai (2):
  cxgb4: Add control net_device for configuring PCIe VF
  cxgb4/cxgb4vf: Add set VF mac address support

 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h         |    3 +
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c    |  141 +++++++++++++++++---
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c         |   41 ++++++
 .../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c    |   24 ++++
 drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h |    3 +
 drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c     |   63 ++++++++-
 6 files changed, 251 insertions(+), 24 deletions(-)

-- 
1.7.3

[PATCHv4 net-next 1/2] cxgb4: Add control net_device for configuring PCIe VF

[Hariprasad Shenai]

Issue:
For instance, the current APIs assume a 1-to-1 mapping of Network Ports,
Physical Functions and the SR-IOV Virtual Functions of those Physical
Functions. This is not the case with our cards where any Virtual
Function can be hooked up to any Port -- or any number of Ports the
current Linux APIs also assume only 1 Network Interface/Port can be
accessed per Virtual Function.

Another issue is that these APIs assume that the Administrative Driver
is attached to the Physical Function Associated with a Virtual Function.
This is not the case with our card where all administration is performed
by a Driver which is not attached to any of the Physical Functions which
have SR-IOV PCI Capabilities.

Another consequence of these assumptions is the inability to utilize all
of the cards SR-IOV resources. For instance, our cards have SR-IOV
Capabilities on Physical Functions 0..3 and the administrative Driver
attaches to Physical Function 4. Each of the Physical Functions 0..3 can
support up to 16 Virtual Functions. With the current Linux APIs, a
2-Port card would only be able to use the Virtual Functions on Physical
Function 0..1 and not allow the Virtual Functions on Physical Functions
2..3 to be used since there are no Ports 2..3 on a 2-Port card.

Fix:
Since the control node is always the netdevice for all VF ACL commands.
Created a dummy netdevice for each Physical Function from 0 to 3 through
which one could control their VFs. The device won't be associated with
any port, since it doesn't need to transmit/receive. Its purely used
for VF management purpose only. The device will be registered only when
VF for a particular PF is configured using PCI sysfs interface and
unregistered while pci_disable_sriov() for the PF is called.

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c |  119 +++++++++++++++++++----
 1 files changed, 101 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index c45de49..771e7ad 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -3139,6 +3139,24 @@ static const struct net_device_ops cxgb4_netdev_ops = {
 
 };
 
+static const struct net_device_ops cxgb4_mgmt_netdev_ops = {
+};
+
+static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct adapter *adapter = netdev2adap(dev);
+
+	strlcpy(info->driver, cxgb4_driver_name, sizeof(info->driver));
+	strlcpy(info->version, cxgb4_driver_version,
+		sizeof(info->version));
+	strlcpy(info->bus_info, pci_name(adapter->pdev),
+		sizeof(info->bus_info));
+}
+
+static const struct ethtool_ops cxgb4_mgmt_ethtool_ops = {
+	.get_drvinfo       = get_drvinfo,
+};
+
 void t4_fatal_err(struct adapter *adap)
 {
 	t4_set_reg_field(adap, SGE_CONTROL_A, GLOBALENABLE_F, 0);
@@ -4836,19 +4854,12 @@ static int get_chip_type(struct pci_dev *pdev, u32 pl_rev)
 #ifdef CONFIG_PCI_IOV
 static int cxgb4_iov_configure(struct pci_dev *pdev, int num_vfs)
 {
+	struct adapter *adap = pci_get_drvdata(pdev);
 	int err = 0;
 	int current_vfs = pci_num_vf(pdev);
 	u32 pcie_fw;
-	void __iomem *regs;
 
-	regs = pci_ioremap_bar(pdev, 0);
-	if (!regs) {
-		dev_err(&pdev->dev, "cannot map device registers\n");
-		return -ENOMEM;
-	}
-
-	pcie_fw = readl(regs + PCIE_FW_A);
-	iounmap(regs);
+	pcie_fw = readl(adap->regs + PCIE_FW_A);
 	/* Check if cxgb4 is the MASTER and fw is initialized */
 	if (!(pcie_fw & PCIE_FW_INIT_F) ||
 	    !(pcie_fw & PCIE_FW_MASTER_VLD_F) ||
@@ -4875,6 +4886,8 @@ static int cxgb4_iov_configure(struct pci_dev *pdev, int num_vfs)
 	 */
 	if (!num_vfs) {
 		pci_disable_sriov(pdev);
+		if (adap->port[0]->reg_state == NETREG_REGISTERED)
+			unregister_netdev(adap->port[0]);
 		return num_vfs;
 	}
 
@@ -4882,6 +4895,12 @@ static int cxgb4_iov_configure(struct pci_dev *pdev, int num_vfs)
 		err = pci_enable_sriov(pdev, num_vfs);
 		if (err)
 			return err;
+
+		if (adap->port[0]->reg_state == NETREG_UNINITIALIZED) {
+			err = register_netdev(adap->port[0]);
+			if (err < 0)
+				pr_info("Unable to register VF mgmt netdev\n");
+		}
 	}
 	return num_vfs;
 }
@@ -4893,9 +4912,12 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct port_info *pi;
 	bool highdma = false;
 	struct adapter *adapter = NULL;
+	struct net_device *netdev;
+	char name[IFNAMSIZ];
 	void __iomem *regs;
 	u32 whoami, pl_rev;
 	enum chip_type chip;
+	static int adap_idx = 1;
 
 	printk_once(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION);
 
@@ -4930,7 +4952,9 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	func = CHELSIO_CHIP_VERSION(chip) <= CHELSIO_T5 ?
 		SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami);
 	if (func != ent->driver_data) {
+#ifndef CONFIG_PCI_IOV
 		iounmap(regs);
+#endif
 		pci_disable_device(pdev);
 		pci_save_state(pdev);        /* to restore SR-IOV later */
 		goto sriov;
@@ -4962,6 +4986,7 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		err = -ENOMEM;
 		goto out_unmap_bar0;
 	}
+	adap_idx++;
 
 	adapter->workq = create_singlethread_workqueue("cxgb4");
 	if (!adapter->workq) {
@@ -5048,8 +5073,6 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 			      T6_STATMODE_V(0)));
 
 	for_each_port(adapter, i) {
-		struct net_device *netdev;
-
 		netdev = alloc_etherdev_mq(sizeof(struct port_info),
 					   MAX_ETH_QSETS);
 		if (!netdev) {
@@ -5217,6 +5240,7 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		attach_ulds(adapter);
 
 	print_adapter_info(adapter);
+	return 0;
 
 sriov:
 #ifdef CONFIG_PCI_IOV
@@ -5230,9 +5254,58 @@ sriov:
 				 "instantiated %u virtual functions\n",
 				 num_vf[func]);
 	}
-#endif
+
+	adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
+	if (!adapter) {
+		err = -ENOMEM;
+		goto free_pci_region;
+	}
+
+	snprintf(name, IFNAMSIZ, "mgmtpf%d%d", adap_idx, func);
+	netdev = alloc_netdev(0, name, NET_NAME_UNKNOWN, ether_setup);
+	if (!netdev) {
+		err = -ENOMEM;
+		goto free_adapter;
+	}
+
+	adapter->pdev = pdev;
+	adapter->pdev_dev = &pdev->dev;
+	adapter->name = pci_name(pdev);
+	adapter->mbox = func;
+	adapter->pf = func;
+	adapter->regs = regs;
+	adapter->mbox_log = kzalloc(sizeof(*adapter->mbox_log) +
+				    (sizeof(struct mbox_cmd) *
+				     T4_OS_LOG_MBOX_CMDS),
+				    GFP_KERNEL);
+	if (!adapter->mbox_log) {
+		err = -ENOMEM;
+		goto free_netdevice;
+	}
+	pi = netdev_priv(netdev);
+	pi->adapter = adapter;
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+	pci_set_drvdata(pdev, adapter);
+
+	adapter->port[0] = netdev;
+	netdev->netdev_ops = &cxgb4_mgmt_netdev_ops;
+	netdev->ethtool_ops = &cxgb4_mgmt_ethtool_ops;
+
 	return 0;
 
+ free_netdevice:
+	free_netdev(adapter->port[0]);
+ free_adapter:
+	kfree(adapter);
+ free_pci_region:
+	iounmap(regs);
+	pci_disable_sriov(pdev);
+	pci_release_regions(pdev);
+	return err;
+#else
+	return 0;
+#endif
+
  out_free_dev:
 	free_some_resources(adapter);
  out_unmap_bar:
@@ -5258,12 +5331,12 @@ static void remove_one(struct pci_dev *pdev)
 {
 	struct adapter *adapter = pci_get_drvdata(pdev);
 
-#ifdef CONFIG_PCI_IOV
-	pci_disable_sriov(pdev);
-
-#endif
+	if (!adapter) {
+		pci_release_regions(pdev);
+		return;
+	}
 
-	if (adapter) {
+	if (adapter->pf == 4) {
 		int i;
 
 		/* Tear down per-adapter Work Queue first since it can contain
@@ -5312,8 +5385,18 @@ static void remove_one(struct pci_dev *pdev)
 		kfree(adapter->mbox_log);
 		synchronize_rcu();
 		kfree(adapter);
-	} else
+	}
+#ifdef CONFIG_PCI_IOV
+	else {
+		if (adapter->port[0]->reg_state == NETREG_REGISTERED)
+			unregister_netdev(adapter->port[0]);
+		free_netdev(adapter->port[0]);
+		iounmap(adapter->regs);
+		kfree(adapter);
+		pci_disable_sriov(pdev);
 		pci_release_regions(pdev);
+	}
+#endif
 }
 
 static struct pci_driver cxgb4_driver = {
-- 
1.7.3

[PATCHv4 net-next 2/2] cxgb4/cxgb4vf: Add set VF mac address support

[Hariprasad Shenai]

Add ndo_set_vf_mac support which allows to set the MAC address
for cxgb4vf interfaces from the host

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h         |    3 +
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c    |   24 +++++++-
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c         |   41 +++++++++++++
 .../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c    |   24 ++++++++
 drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h |    3 +
 drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c     |   63 ++++++++++++++++++--
 6 files changed, 151 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index b4fceb9..7ce076f 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -1520,4 +1520,7 @@ void t4_idma_monitor_init(struct adapter *adapter,
 void t4_idma_monitor(struct adapter *adapter,
 		     struct sge_idma_monitor_state *idma,
 		     int hz, int ticks);
+int t4_set_vf_mac_acl(struct adapter *adapter, unsigned int vf,
+		      unsigned int naddr, u8 *addr);
+
 #endif /* __CXGB4_H__ */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 771e7ad..4f196d9 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -3078,6 +3078,26 @@ static int cxgb_change_mtu(struct net_device *dev, int new_mtu)
 	return ret;
 }
 
+#ifdef CONFIG_PCI_IOV
+static int cxgb_set_vf_mac(struct net_device *dev, int vf, u8 *mac)
+{
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adap = pi->adapter;
+
+	/* verify MAC addr is valid */
+	if (!is_valid_ether_addr(mac)) {
+		dev_err(pi->adapter->pdev_dev,
+			"Invalid Ethernet address %pM for VF %d\n",
+			mac, vf);
+		return -EINVAL;
+	}
+
+	dev_info(pi->adapter->pdev_dev,
+		 "Setting MAC %pM on VF %d\n", mac, vf);
+	return t4_set_vf_mac_acl(adap, vf + 1, 1, mac);
+}
+#endif
+
 static int cxgb_set_mac_addr(struct net_device *dev, void *p)
 {
 	int ret;
@@ -3136,10 +3156,12 @@ static const struct net_device_ops cxgb4_netdev_ops = {
 #ifdef CONFIG_NET_RX_BUSY_POLL
 	.ndo_busy_poll        = cxgb_busy_poll,
 #endif
-
 };
 
 static const struct net_device_ops cxgb4_mgmt_netdev_ops = {
+#ifdef CONFIG_PCI_IOV
+	.ndo_set_vf_mac       = cxgb_set_vf_mac,
+#endif
 };
 
 static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index a63addb..065affe 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -8262,3 +8262,44 @@ void t4_idma_monitor(struct adapter *adapter,
 		t4_sge_decode_idma_state(adapter, idma->idma_state[i]);
 	}
 }
+
+/**
+ *	t4_set_vf_mac - Set MAC address for the specified VF
+ *	@adapter: The adapter
+ *	@vf: one of the VFs instantiated by the specified PF
+ *	@naddr: the number of MAC addresses
+ *	@addr: the MAC address(es) to be set to the specified VF
+ */
+int t4_set_vf_mac_acl(struct adapter *adapter, unsigned int vf,
+		      unsigned int naddr, u8 *addr)
+{
+	struct fw_acl_mac_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_ACL_MAC_CMD) |
+				    FW_CMD_REQUEST_F |
+				    FW_CMD_WRITE_F |
+				    FW_ACL_MAC_CMD_PFN_V(adapter->pf) |
+				    FW_ACL_MAC_CMD_VFN_V(vf));
+
+	/* Note: Do not enable the ACL */
+	cmd.en_to_len16 = cpu_to_be32((unsigned int)FW_LEN16(cmd));
+	cmd.nmac = naddr;
+
+	switch (adapter->pf) {
+	case 3:
+		memcpy(cmd.macaddr3, addr, sizeof(cmd.macaddr3));
+		break;
+	case 2:
+		memcpy(cmd.macaddr2, addr, sizeof(cmd.macaddr2));
+		break;
+	case 1:
+		memcpy(cmd.macaddr1, addr, sizeof(cmd.macaddr1));
+		break;
+	case 0:
+		memcpy(cmd.macaddr0, addr, sizeof(cmd.macaddr0));
+		break;
+	}
+
+	return t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &cmd);
+}
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index 8d9b2cb..9b42ad0 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -2695,6 +2695,7 @@ static int cxgb4vf_pci_probe(struct pci_dev *pdev,
 	struct adapter *adapter;
 	struct port_info *pi;
 	struct net_device *netdev;
+	unsigned int pf;
 
 	/*
 	 * Print our driver banner the first time we're called to initialize a
@@ -2819,8 +2820,11 @@ static int cxgb4vf_pci_probe(struct pci_dev *pdev,
 	 * Allocate our "adapter ports" and stitch everything together.
 	 */
 	pmask = adapter->params.vfres.pmask;
+	pf = t4vf_get_pf_from_vf(adapter);
 	for_each_port(adapter, pidx) {
 		int port_id, viid;
+		u8 mac[ETH_ALEN];
+		unsigned int naddr = 1;
 
 		/*
 		 * We simplistically allocate our virtual interfaces
@@ -2891,6 +2895,26 @@ static int cxgb4vf_pci_probe(struct pci_dev *pdev,
 				pidx);
 			goto err_free_dev;
 		}
+
+		err = t4vf_get_vf_mac_acl(adapter, pf, &naddr, mac);
+		if (err) {
+			dev_err(&pdev->dev,
+				"unable to determine MAC ACL address, "
+				"continuing anyway.. (status %d)\n", err);
+		} else if (naddr && adapter->params.vfres.nvi == 1) {
+			struct sockaddr addr;
+
+			ether_addr_copy(addr.sa_data, mac);
+			err = cxgb4vf_set_mac_addr(netdev, &addr);
+			if (err) {
+				dev_err(&pdev->dev,
+					"unable to set MAC address %pM\n",
+					mac);
+				goto err_free_dev;
+			}
+			dev_info(&pdev->dev,
+				 "Using assigned MAC ACL: %pM\n", mac);
+		}
 	}
 
 	/* See what interrupts we'll be using.  If we've been configured to
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
index 438374a..b880401 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
@@ -346,6 +346,7 @@ int t4vf_bar2_sge_qregs(struct adapter *adapter,
 			u64 *pbar2_qoffset,
 			unsigned int *pbar2_qid);
 
+unsigned int t4vf_get_pf_from_vf(struct adapter *);
 int t4vf_get_sge_params(struct adapter *);
 int t4vf_get_vpd_params(struct adapter *);
 int t4vf_get_dev_params(struct adapter *);
@@ -380,5 +381,7 @@ int t4vf_eth_eq_free(struct adapter *, unsigned int);
 
 int t4vf_handle_fw_rpl(struct adapter *, const __be64 *);
 int t4vf_prep_adapter(struct adapter *);
+int t4vf_get_vf_mac_acl(struct adapter *adapter, unsigned int pf,
+			unsigned int *naddr, u8 *addr);
 
 #endif /* __T4VF_COMMON_H__ */
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
index 955ff7c..da3dec0 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
@@ -583,6 +583,15 @@ int t4vf_bar2_sge_qregs(struct adapter *adapter,
 	return 0;
 }
 
+unsigned int t4vf_get_pf_from_vf(struct adapter *adapter)
+{
+	u32 whoami;
+
+	whoami = t4_read_reg(adapter, T4VF_PL_BASE_ADDR + PL_VF_WHOAMI_A);
+	return (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
+			SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami));
+}
+
 /**
  *	t4vf_get_sge_params - retrieve adapter Scatter gather Engine parameters
  *	@adapter: the adapter
@@ -660,7 +669,6 @@ int t4vf_get_sge_params(struct adapter *adapter)
 	 * read.
 	 */
 	if (!is_t4(adapter->params.chip)) {
-		u32 whoami;
 		unsigned int pf, s_hps, s_qpp;
 
 		params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) |
@@ -684,11 +692,7 @@ int t4vf_get_sge_params(struct adapter *adapter)
 		 * register we just read. Do it once here so other code in
 		 * the driver can just use it.
 		 */
-		whoami = t4_read_reg(adapter,
-				     T4VF_PL_BASE_ADDR + PL_VF_WHOAMI_A);
-		pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
-			SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami);
-
+		pf = t4vf_get_pf_from_vf(adapter);
 		s_hps = (HOSTPAGESIZEPF0_S +
 			 (HOSTPAGESIZEPF1_S - HOSTPAGESIZEPF0_S) * pf);
 		sge_params->sge_vf_hps =
@@ -1749,3 +1753,50 @@ int t4vf_prep_adapter(struct adapter *adapter)
 
 	return 0;
 }
+
+/**
+ *	t4vf_get_vf_mac_acl - Get the MAC address to be set to
+ *			      the VI of this VF.
+ *	@adapter: The adapter
+ *	@pf: The pf associated with vf
+ *	@naddr: the number of ACL MAC addresses returned in addr
+ *	@addr: Placeholder for MAC addresses
+ *
+ *	Find the MAC address to be set to the VF's VI. The requested MAC address
+ *	is from the host OS via callback in the PF driver.
+ */
+int t4vf_get_vf_mac_acl(struct adapter *adapter, unsigned int pf,
+			unsigned int *naddr, u8 *addr)
+{
+	struct fw_acl_mac_cmd cmd;
+	int ret;
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_ACL_MAC_CMD) |
+				    FW_CMD_REQUEST_F |
+				    FW_CMD_READ_F);
+	cmd.en_to_len16 = cpu_to_be32((unsigned int)FW_LEN16(cmd));
+	ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &cmd);
+	if (ret)
+		return ret;
+
+	if (cmd.nmac < *naddr)
+		*naddr = cmd.nmac;
+
+	switch (pf) {
+	case 3:
+		memcpy(addr, cmd.macaddr3, sizeof(cmd.macaddr3));
+		break;
+	case 2:
+		memcpy(addr, cmd.macaddr2, sizeof(cmd.macaddr2));
+		break;
+	case 1:
+		memcpy(addr, cmd.macaddr1, sizeof(cmd.macaddr1));
+		break;
+	case 0:
+		memcpy(addr, cmd.macaddr0, sizeof(cmd.macaddr0));
+		break;
+	}
+
+	return ret;
+}
-- 
1.7.3

Re: [PATCHv4 net-next 1/2] cxgb4: Add control net_device for configuring PCIe VF

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1634 bytes --]

Hi Hariprasad,

[auto build test WARNING on net-next/master]

url:    https://github.com/0day-ci/linux/commits/Hariprasad-Shenai/Add-support-for-IFLA_VF_MAC/20160811-193707
config: x86_64-acpi-redef (attached as .config)
compiler: gcc-6 (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All warnings (new ones prefixed by >>):

   drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c: In function 'init_one':
>> drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:4916:7: warning: unused variable 'name' [-Wunused-variable]
     char name[IFNAMSIZ];
          ^~~~

vim +/name +4916 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c

  4900				err = register_netdev(adap->port[0]);
  4901				if (err < 0)
  4902					pr_info("Unable to register VF mgmt netdev\n");
  4903			}
  4904		}
  4905		return num_vfs;
  4906	}
  4907	#endif
  4908	
  4909	static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
  4910	{
  4911		int func, i, err, s_qpp, qpp, num_seg;
  4912		struct port_info *pi;
  4913		bool highdma = false;
  4914		struct adapter *adapter = NULL;
  4915		struct net_device *netdev;
> 4916		char name[IFNAMSIZ];
  4917		void __iomem *regs;
  4918		u32 whoami, pl_rev;
  4919		enum chip_type chip;
  4920		static int adap_idx = 1;
  4921	
  4922		printk_once(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION);
  4923	
  4924		err = pci_request_regions(pdev, KBUILD_MODNAME);

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 28417 bytes --]