Hi Dave, On Fri, Aug 12, 2016 at 08:02:08PM +1000, Dave Chinner wrote: >On Fri, Aug 12, 2016 at 04:51:24PM +0800, Ye Xiaolong wrote: >> On 08/12, Ye Xiaolong wrote: >> >On 08/12, Dave Chinner wrote: >> >> [snip] >> >> >>lkp-folk: the patch I've just tested it attached below - can you >> >>feed that through your test and see if it fixes the regression? >> >> >> > >> >Hi, Dave >> > >> >I am verifying your fix patch in lkp environment now, will send the >> >result once I get it. >> > >> >> Here is the test result. > >Which says "no change". Oh well, back to the drawing board... > >Can you send me the aim7 config file and command line you are using >for the test? The test scripts can be found here: https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/tree/setup/disk https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/tree/setup/fs https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/tree/tests/aim7 Here are the real commands they executed in this test: modprobe -r brd modprobe brd rd_nr=1 rd_size=50331648 part_show=1 dmsetup remove_all wipefs -a --force /dev/ram0 mkfs -t xfs /dev/ram0 mkdir -p /fs/ram0 mount -t xfs -o nobarrier,inode64 /dev/ram0 /fs/ram0 for file in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor do echo performance > $file done echo "500 32000 128 512" > /proc/sys/kernel/sem cat > workfile < config ( echo ivb44 echo disk_wrt echo 1 echo 3000 echo 2 echo 3000 echo 1 ) | ./multitask -t Thanks, Fengguang