From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shaun Tancheff Subject: [PATCH v6 2/4] Add support for SCT Write Same Date: Sun, 21 Aug 2016 23:23:19 -0500 Message-ID: <20160822042321.24367-3-shaun@tancheff.com> References: <20160822042321.24367-1-shaun@tancheff.com> Return-path: In-Reply-To: <20160822042321.24367-1-shaun@tancheff.com> Sender: linux-kernel-owner@vger.kernel.org To: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Shaun Tancheff , Tejun Heo , Christoph Hellwig , Tom Yan , "Martin K . Petersen" , Damien Le Moal , Hannes Reinecke , Josh Bingaman , Hannes Reinecke , Shaun Tancheff List-Id: linux-ide@vger.kernel.org SATA drives may support write same via SCT. This is useful for setting the drive contents to a specific pattern (0's). Translate a SCSI WRITE SAME 16 command to be either a DSM TRIM command or an SCT Write Same command. Based on the UNMAP flag: - When set translate to DSM TRIM - When not set translate to SCT Write Same Signed-off-by: Shaun Tancheff --- v6: - Change to use sg_copy_from_buffer as per Christoph Hellwig v5: - Addressed review comments - Report support for ZBC only for zoned devices. - kmap page during rewrite - Fix unmap set to require trim or error, if not unmap then sct write same or error. v4: - Added partial MAINTENANCE_IN opcode simulation - Dropped all changes in drivers/scsi/* - Changed to honor the UNMAP flag -> TRIM, no UNMAP -> SCT. v3: - Demux UNMAP/TRIM from WRITE SAME v2: - Remove fugly ata hacking from sd.c drivers/ata/libata-scsi.c | 199 +++++++++++++++++++++++++++++++++++++++------- include/linux/ata.h | 43 ++++++++++ 2 files changed, 213 insertions(+), 29 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 7990cb2..ebf1a04 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1159,8 +1159,6 @@ static void ata_scsi_sdev_config(struct scsi_device *sdev) { sdev->use_10_for_rw = 1; sdev->use_10_for_ms = 1; - sdev->no_report_opcodes = 1; - sdev->no_write_same = 1; /* Schedule policy is determined by ->qc_defer() callback and * it needs to see every deferred qc. Set dev_blocked to 1 to @@ -3287,7 +3285,7 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) * @cmd: SCSI command being translated * @num: Maximum number of entries (nominally 64). * @sector: Starting sector - * @count: Total Range of request + * @count: Total Range of request in logical sectors * * Rewrite the WRITE SAME descriptor to be a DSM TRIM little-endian formatted * descriptor. @@ -3330,6 +3328,45 @@ static unsigned int ata_format_dsm_trim_descr(struct scsi_cmnd *cmd, u32 num, return used_bytes; } +/** + * ata_format_dsm_trim_descr() - SATL Write Same to ATA SCT Write Same + * @cmd: SCSI command being translated + * @lba: Starting sector + * @num: Number of logical sectors to be zero'd. + * + * Rewrite the WRITE SAME descriptor to be an SCT Write Same formatted + * descriptor. + * NOTE: Writes a pattern (0's) in the foreground. + * Large write-same requents can timeout. + */ +static void ata_format_sct_write_same(struct scsi_cmnd *cmd, u64 lba, u64 num) +{ + u16 *sctpg; + unsigned long flags; + + spin_lock_irqsave(&ata_scsi_rbuf_lock, flags); + sctpg = ((void *)ata_scsi_rbuf); + + put_unaligned_le16(0x0002, &sctpg[0]); /* SCT_ACT_WRITE_SAME */ + put_unaligned_le16(0x0101, &sctpg[1]); /* WRITE PTRN FG */ + put_unaligned_le64(lba, &sctpg[2]); + put_unaligned_le64(num, &sctpg[6]); + put_unaligned_le32(0u, &sctpg[10]); + + sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), sctpg, 512); + spin_unlock_irqrestore(&ata_scsi_rbuf_lock, flags); +} + +/** + * ata_scsi_write_same_xlat() - SATL Write Same to ATA SCT Write Same + * @qc: Command to be translated + * + * Translate a SCSI WRITE SAME command to be either a DSM TRIM command or + * an SCT Write Same command. + * Based on WRITE SAME has the UNMAP flag + * When set translate to DSM TRIM + * When clear translate to SCT Write Same + */ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc) { struct ata_taskfile *tf = &qc->tf; @@ -3342,6 +3379,7 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc) u32 size; u16 fp; u8 bp = 0xff; + u8 unmap = cdb[1] & 0x8; /* we may not issue DMA commands if no DMA mode is set */ if (unlikely(!dev->dma_mode)) @@ -3353,11 +3391,26 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc) } scsi_16_lba_len(cdb, &block, &n_block); - /* for now we only support WRITE SAME with the unmap bit set */ - if (unlikely(!(cdb[1] & 0x8))) { - fp = 1; - bp = 3; - goto invalid_fld; + if (unmap) { + /* If trim is not enabled the cmd is invalid. */ + if ((dev->horkage & ATA_HORKAGE_NOTRIM) || + !ata_id_has_trim(dev->id)) { + fp = 1; + bp = 3; + goto invalid_fld; + } + /* If the request is too large the cmd is invalid */ + if (n_block > 0xffff * trmax) { + fp = 2; + goto invalid_fld; + } + } else { + /* If write same is not available the cmd is invalid */ + if (!ata_id_sct_write_same(dev->id)) { + fp = 1; + bp = 3; + goto invalid_fld; + } } /* @@ -3367,30 +3420,42 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc) if (!scsi_sg_count(scmd)) goto invalid_param_len; - if (n_block <= 0xffff * trmax) { + if (unmap) { size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block); + if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) { + /* Newer devices support queued TRIM commands */ + tf->protocol = ATA_PROT_NCQ; + tf->command = ATA_CMD_FPDMA_SEND; + tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f; + tf->nsect = qc->tag << 3; + tf->hob_feature = (size / 512) >> 8; + tf->feature = size / 512; + + tf->auxiliary = 1; + } else { + tf->protocol = ATA_PROT_DMA; + tf->hob_feature = 0; + tf->feature = ATA_DSM_TRIM; + tf->hob_nsect = (size / 512) >> 8; + tf->nsect = size / 512; + tf->command = ATA_CMD_DSM; + } } else { - fp = 2; - goto invalid_fld; - } - - if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) { - /* Newer devices support queued TRIM commands */ - tf->protocol = ATA_PROT_NCQ; - tf->command = ATA_CMD_FPDMA_SEND; - tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f; - tf->nsect = qc->tag << 3; - tf->hob_feature = (size / 512) >> 8; - tf->feature = size / 512; + ata_format_sct_write_same(scmd, block, n_block); - tf->auxiliary = 1; - } else { - tf->protocol = ATA_PROT_DMA; tf->hob_feature = 0; - tf->feature = ATA_DSM_TRIM; - tf->hob_nsect = (size / 512) >> 8; - tf->nsect = size / 512; - tf->command = ATA_CMD_DSM; + tf->feature = 0; + tf->hob_nsect = 0; + tf->nsect = 1; + tf->lbah = 0; + tf->lbam = 0; + tf->lbal = ATA_CMD_STANDBYNOW1; + tf->hob_lbah = 0; + tf->hob_lbam = 0; + tf->hob_lbal = 0; + tf->device = ATA_CMD_STANDBYNOW1; + tf->protocol = ATA_PROT_DMA; + tf->command = ATA_CMD_WRITE_LOG_DMA_EXT; } tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | @@ -3414,6 +3479,76 @@ invalid_opcode: } /** + * ata_scsiop_maint_in - Simulate a subset of MAINTENANCE_IN + * @args: device MAINTENANCE_IN data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * + * Yields a subset to satisfy scsi_report_opcode() + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static unsigned int ata_scsiop_maint_in(struct ata_scsi_args *args, u8 *rbuf) +{ + struct ata_device *dev = args->dev; + u8 *cdb = args->cmd->cmnd; + u8 supported = 0; + unsigned int err = 0; + + if (cdb[2] != 1) { + ata_dev_warn(dev, "invalid command format %d\n", cdb[2]); + err = 2; + goto out; + } + switch (cdb[3]) { + case INQUIRY: + case MODE_SENSE: + case MODE_SENSE_10: + case READ_CAPACITY: + case SERVICE_ACTION_IN_16: + case REPORT_LUNS: + case REQUEST_SENSE: + case SYNCHRONIZE_CACHE: + case REZERO_UNIT: + case SEEK_6: + case SEEK_10: + case TEST_UNIT_READY: + case SEND_DIAGNOSTIC: + case MAINTENANCE_IN: + case READ_6: + case READ_10: + case READ_16: + case WRITE_6: + case WRITE_10: + case WRITE_16: + case ATA_12: + case ATA_16: + case VERIFY: + case VERIFY_16: + case MODE_SELECT: + case MODE_SELECT_10: + case START_STOP: + supported = 3; + break; + case WRITE_SAME_16: + if (ata_id_sct_write_same(dev->id)) + supported = 3; + break; + case ZBC_IN: + case ZBC_OUT: + if (ata_id_zoned_cap(dev->id) || + dev->class == ATA_DEV_ZAC) + supported = 3; + break; + default: + break; + } +out: + rbuf[1] = supported; /* supported */ + return err; +} + +/** * ata_scsi_report_zones_complete - convert ATA output * @qc: command structure returning the data * @@ -4193,6 +4328,13 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd) ata_scsi_invalid_field(dev, cmd, 1); break; + case MAINTENANCE_IN: + if (scsicmd[1] == MI_REPORT_SUPPORTED_OPERATION_CODES) + ata_scsi_rbuf_fill(&args, ata_scsiop_maint_in); + else + ata_scsi_invalid_field(dev, cmd, 1); + break; + /* all other commands */ default: ata_scsi_set_sense(dev, cmd, ILLEGAL_REQUEST, 0x20, 0x0); @@ -4225,7 +4367,6 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) shost->max_lun = 1; shost->max_channel = 1; shost->max_cmd_len = 16; - shost->no_write_same = 1; /* Schedule policy is determined by ->qc_defer() * callback and it needs to see every deferred qc. diff --git a/include/linux/ata.h b/include/linux/ata.h index 45a1d71..fdb1803 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -105,6 +105,7 @@ enum { ATA_ID_CFA_KEY_MGMT = 162, ATA_ID_CFA_MODES = 163, ATA_ID_DATA_SET_MGMT = 169, + ATA_ID_SCT_CMD_XPORT = 206, ATA_ID_ROT_SPEED = 217, ATA_ID_PIO4 = (1 << 1), @@ -789,6 +790,48 @@ static inline bool ata_id_sense_reporting_enabled(const u16 *id) } /** + * + * Word: 206 - SCT Command Transport + * 15:12 - Vendor Specific + * 11:6 - Reserved + * 5 - SCT Command Transport Data Tables supported + * 4 - SCT Command Transport Features Control supported + * 3 - SCT Command Transport Error Recovery Control supported + * 2 - SCT Command Transport Write Same supported + * 1 - SCT Command Transport Long Sector Access supported + * 0 - SCT Command Transport supported + */ +static inline bool ata_id_sct_data_tables(const u16 *id) +{ + return id[ATA_ID_SCT_CMD_XPORT] & (1 << 5) ? true : false; +} + +static inline bool ata_id_sct_features_ctrl(const u16 *id) +{ + return id[ATA_ID_SCT_CMD_XPORT] & (1 << 4) ? true : false; +} + +static inline bool ata_id_sct_error_recovery_ctrl(const u16 *id) +{ + return id[ATA_ID_SCT_CMD_XPORT] & (1 << 3) ? true : false; +} + +static inline bool ata_id_sct_write_same(const u16 *id) +{ + return id[ATA_ID_SCT_CMD_XPORT] & (1 << 2) ? true : false; +} + +static inline bool ata_id_sct_long_sector_access(const u16 *id) +{ + return id[ATA_ID_SCT_CMD_XPORT] & (1 << 1) ? true : false; +} + +static inline bool ata_id_sct_supported(const u16 *id) +{ + return id[ATA_ID_SCT_CMD_XPORT] & (1 << 0) ? true : false; +} + +/** * ata_id_major_version - get ATA level of drive * @id: Identify data * -- 2.9.3