All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew F. Davis <afd@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC PATCH v2 07/11] omap: Use SD_BOOT in place of EMMC_BOOT
Date: Mon, 22 Aug 2016 10:21:27 -0500	[thread overview]
Message-ID: <20160822152131.15340-8-afd@ti.com> (raw)
In-Reply-To: <20160822152131.15340-1-afd@ti.com>

The config option EMMC_BOOT is used in several OMAP based platforms with
the same meaning as the existing SD_BOOT. Convert all uses, no functional
changes.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 board/ti/am335x/mux.c                    | 4 ++--
 configs/am335x_boneblack_defconfig       | 2 +-
 configs/am335x_boneblack_vboot_defconfig | 3 ++-
 configs/am335x_sl50_defconfig            | 2 +-
 configs/brppt1_mmc_defconfig             | 3 ++-
 configs/brppt1_spi_defconfig             | 3 ++-
 include/configs/am335x_evm.h             | 2 +-
 include/configs/am335x_sl50.h            | 2 +-
 include/configs/bav335x.h                | 2 +-
 include/configs/brppt1.h                 | 6 +++---
 10 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 8afa5f9..2d580d2 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -383,9 +383,9 @@ void enable_board_pin_mux(void)
 		/* Beaglebone LT pinmux */
 		configure_module_pin_mux(mii1_pin_mux);
 		configure_module_pin_mux(mmc0_pin_mux);
-#if defined(CONFIG_NAND) && defined(CONFIG_EMMC_BOOT)
+#if defined(CONFIG_NAND) && defined(CONFIG_SD_BOOT)
 		configure_module_pin_mux(nand_pin_mux);
-#elif defined(CONFIG_NOR) && defined(CONFIG_EMMC_BOOT)
+#elif defined(CONFIG_NOR) && defined(CONFIG_SD_BOOT)
 		configure_module_pin_mux(bone_norcape_pin_mux);
 #else
 		configure_module_pin_mux(mmc1_pin_mux);
diff --git a/configs/am335x_boneblack_defconfig b/configs/am335x_boneblack_defconfig
index 5fabff6..93e6678 100644
--- a/configs/am335x_boneblack_defconfig
+++ b/configs/am335x_boneblack_defconfig
@@ -5,7 +5,6 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_SPL=y
 CONFIG_SPL_STACK_R=y
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
 CONFIG_HUSH_PARSER=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
@@ -44,3 +43,4 @@ CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
 CONFIG_G_DNL_VENDOR_NUM=0x0451
 CONFIG_G_DNL_PRODUCT_NUM=0xd022
 CONFIG_OF_LIBFDT=y
+CONFIG_SD_BOOT=y
diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig
index b47b51f..4dfe04e 100644
--- a/configs/am335x_boneblack_vboot_defconfig
+++ b/configs/am335x_boneblack_vboot_defconfig
@@ -8,7 +8,7 @@ CONFIG_SPL_STACK_R=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
-CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT,ENABLE_VBOOT"
+CONFIG_SYS_EXTRA_OPTIONS="ENABLE_VBOOT"
 CONFIG_HUSH_PARSER=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
@@ -51,3 +51,4 @@ CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
 CONFIG_G_DNL_VENDOR_NUM=0x0451
 CONFIG_G_DNL_PRODUCT_NUM=0xd022
 CONFIG_DM_I2C=y
+CONFIG_SD_BOOT=y
diff --git a/configs/am335x_sl50_defconfig b/configs/am335x_sl50_defconfig
index 87ea29e..ff4c950 100644
--- a/configs/am335x_sl50_defconfig
+++ b/configs/am335x_sl50_defconfig
@@ -5,7 +5,6 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_SPL=y
 CONFIG_SPL_STACK_R=y
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
 CONFIG_HUSH_PARSER=y
 # CONFIG_AUTOBOOT is not set
 CONFIG_CMD_BOOTZ=y
@@ -27,3 +26,4 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y
+CONFIG_SD_BOOT=y
diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig
index cf2800b..9d36530 100644
--- a/configs/brppt1_mmc_defconfig
+++ b/configs/brppt1_mmc_defconfig
@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_BRPPT1=y
 CONFIG_SPL=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
 CONFIG_BOOTDELAY=-2
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
@@ -35,3 +35,4 @@ CONFIG_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_STORAGE=y
 CONFIG_OF_LIBFDT=y
+CONFIG_SD_BOOT=y
diff --git a/configs/brppt1_spi_defconfig b/configs/brppt1_spi_defconfig
index fee9973..65a5666 100644
--- a/configs/brppt1_spi_defconfig
+++ b/configs/brppt1_spi_defconfig
@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_BRPPT1=y
 CONFIG_SPL=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT"
 CONFIG_SPI_BOOT=y
 CONFIG_BOOTDELAY=-2
 CONFIG_HUSH_PARSER=y
@@ -41,3 +41,4 @@ CONFIG_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_STORAGE=y
 CONFIG_OF_LIBFDT=y
+CONFIG_SD_BOOT=y
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index ba4c215..6be0e22 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -418,7 +418,7 @@
 					"512k(u-boot),128k(u-boot-env1)," \
 					"128k(u-boot-env2),3464k(kernel)," \
 					"-(rootfs)"
-#elif defined(CONFIG_EMMC_BOOT)
+#elif defined(CONFIG_SD_BOOT)
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SYS_MMC_ENV_DEV		1
diff --git a/include/configs/am335x_sl50.h b/include/configs/am335x_sl50.h
index 8454872..2854536 100644
--- a/include/configs/am335x_sl50.h
+++ b/include/configs/am335x_sl50.h
@@ -114,7 +114,7 @@
 #define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
 #endif
 
-#if defined(CONFIG_EMMC_BOOT)
+#if defined(CONFIG_SD_BOOT)
 #undef CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SPL_ENV_SUPPORT
diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h
index e391c91..8743db4 100644
--- a/include/configs/bav335x.h
+++ b/include/configs/bav335x.h
@@ -548,7 +548,7 @@ DEFAULT_LINUX_BOOT_ENV \
 					"512k(u-boot),128k(u-boot-env1)," \
 					"128k(u-boot-env2),3464k(kernel)," \
 					"-(rootfs)"
-#elif defined(CONFIG_EMMC_BOOT)
+#elif defined(CONFIG_SD_BOOT)
 #undef CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SPL_ENV_SUPPORT
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 6a239b5..69a1adc 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -50,7 +50,7 @@
 #define CONFIG_MACH_TYPE		0xFFFFFFFF /* TODO: check with kernel*/
 
 /* MMC/SD IP block */
-#if defined(CONFIG_EMMC_BOOT)
+#if defined(CONFIG_SD_BOOT)
  #define CONFIG_MMC
  #define CONFIG_GENERIC_MMC
  #define CONFIG_OMAP_HSMMC
@@ -59,7 +59,7 @@
  #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /*addr. 0x60000 */
  #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x200 /* 256 KB */
  #define CONFIG_SPL_MMC_SUPPORT
-#endif /* CONFIG_EMMC_BOOT */
+#endif /* CONFIG_SD_BOOT */
 
 /*
  * When we have SPI or NAND flash we expect to be making use of mtdparts,
@@ -269,7 +269,7 @@ MMCARGS
 #define CONFIG_ENV_OFFSET		(768 << 10) /* 768 KiB in */
 #define CONFIG_ENV_OFFSET_REDUND	(896 << 10) /* 896 KiB in */
 
-#elif defined(CONFIG_EMMC_BOOT)
+#elif defined(CONFIG_SD_BOOT)
 #undef CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
-- 
2.9.3

  parent reply	other threads:[~2016-08-22 15:21 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-22 15:21 [U-Boot] [PATCH v2 00/11] Allow secure boot on AM33xx devices Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [PATCH v2 01/11] Kconfig: Separate AM33XX SOC config from target board config Andrew F. Davis
2016-08-26 20:12   ` Tom Rini
2016-08-22 15:21 ` [U-Boot] [PATCH v2 02/11] am33xx: config.mk: Add support for additional secure boot image types Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [PATCH v2 03/11] am33xx: config.mk: Fix option used to enable SPI SPL image type Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [PATCH v2 04/11] doc: Update info on using AM33xx secure devices from TI Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [PATCH v2 05/11] ti: omap-common: Allow AM33xx devices to be built securely Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [PATCH v2 06/11] board: am33xx-hs: spl: Allow post-processing of FIT image on AM33xx Andrew F. Davis
2016-08-22 15:21 ` Andrew F. Davis [this message]
2016-08-22 15:21 ` [U-Boot] [RFC PATCH v2 08/11] config: Remove usage of CONFIG_STORAGE_EMMC Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [RFC PATCH v2 09/11] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Andrew F. Davis
2016-08-23  6:08   ` Masahiro Yamada
2016-08-23 15:02     ` Andrew F. Davis
2016-08-26 20:06     ` Tom Rini
2016-08-22 15:21 ` [U-Boot] [RFC PATCH v2 10/11] spl: Kconfig: Add SPL_<media>_BOOT " Andrew F. Davis
2016-08-22 15:21 ` [U-Boot] [RFC PATCH v2 11/11] spl: Kconfig: Add CONFIG_SPL_TEXT_BASE " Andrew F. Davis
2016-08-23  5:45   ` Masahiro Yamada
2016-08-23 14:57     ` Andrew F. Davis
2016-08-26 17:59       ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160822152131.15340-8-afd@ti.com \
    --to=afd@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.