* [PATCH v5 0/4] arm64: renesas: enable H3ULCB board peripherals
@ 2016-09-02 16:23 ` Vladimir Barinov
0 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:23 UTC (permalink / raw)
To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Vladimir Barinov
Hello,
This adds the folowing:
- R8A7795 SoC based H3ULCB board peripherals
Vladimir Barinov (4):
[1/4] arm64: dts: h3ulcb: enable GPIO leds
[2/4] arm64: dts: h3ulcb: enable GPIO keys
[3/4] arm64: dts: h3ulcb: enable SDHI0
[4/4] arm64: dts: h3ulcb: Sound SSI support
---
This patchset is against the 'kernel/git/horms/renesas.git' repo.
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 189 +++++++++++++++++++++++++
1 file changed, 189 insertions(+)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v5 0/4] arm64: renesas: enable H3ULCB board peripherals
@ 2016-09-02 16:23 ` Vladimir Barinov
0 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:23 UTC (permalink / raw)
To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
Cc: devicetree, linux-renesas-soc, Vladimir Barinov
Hello,
This adds the folowing:
- R8A7795 SoC based H3ULCB board peripherals
Vladimir Barinov (4):
[1/4] arm64: dts: h3ulcb: enable GPIO leds
[2/4] arm64: dts: h3ulcb: enable GPIO keys
[3/4] arm64: dts: h3ulcb: enable SDHI0
[4/4] arm64: dts: h3ulcb: Sound SSI support
---
This patchset is against the 'kernel/git/horms/renesas.git' repo.
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 189 +++++++++++++++++++++++++
1 file changed, 189 insertions(+)
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v5 1/4] arm64: dts: h3ulcb: enable GPIO leds
2016-09-02 16:23 ` Vladimir Barinov
@ 2016-09-02 16:24 ` Vladimir Barinov
-1 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:24 UTC (permalink / raw)
To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Vladimir Barinov
This supports GPIO leds on H3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
Changes in version 3:
- initially added
Changes in version 4:
- removed led4 in favor of gpio-keys
- added label
Changes in version 5:
- nothing
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index fb694b8..3329f78 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -31,6 +31,19 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ led5 {
+ label = "LED5";
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+ led6 {
+ label = "LED6";
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&extal_clk {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 1/4] arm64: dts: h3ulcb: enable GPIO leds
@ 2016-09-02 16:24 ` Vladimir Barinov
0 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:24 UTC (permalink / raw)
To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
Cc: devicetree, linux-renesas-soc, Vladimir Barinov
This supports GPIO leds on H3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes in version 3:
- initially added
Changes in version 4:
- removed led4 in favor of gpio-keys
- added label
Changes in version 5:
- nothing
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index fb694b8..3329f78 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -31,6 +31,19 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ led5 {
+ label = "LED5";
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+ led6 {
+ label = "LED6";
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&extal_clk {
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys
2016-09-02 16:23 ` Vladimir Barinov
@ 2016-09-02 16:24 ` Vladimir Barinov
-1 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:24 UTC (permalink / raw)
To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Vladimir Barinov
This supports GPIO keys on H3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
---
Changes in version 4:
- initially added
Changes in version 5:
- nothing
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 14 +++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index fb694b8..3329f78 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "r8a7795.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Renesas H3ULCB board based on r8a7795";
@@ -31,6 +31,18 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ key-1 {
+ linux,code = <KEY_1>;
+ label = "SW3";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ };
+ };
leds {
compatible = "gpio-leds";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys
@ 2016-09-02 16:24 ` Vladimir Barinov
0 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:24 UTC (permalink / raw)
To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
Cc: devicetree, linux-renesas-soc, Vladimir Barinov
This supports GPIO keys on H3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
---
Changes in version 4:
- initially added
Changes in version 5:
- nothing
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 14 +++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index fb694b8..3329f78 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "r8a7795.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Renesas H3ULCB board based on r8a7795";
@@ -31,6 +31,18 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ key-1 {
+ linux,code = <KEY_1>;
+ label = "SW3";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ };
+ };
leds {
compatible = "gpio-leds";
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 3/4] arm64: dts: h3ulcb: enable SDHI0
2016-09-02 16:23 ` Vladimir Barinov
@ 2016-09-02 16:25 ` Vladimir Barinov
-1 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:25 UTC (permalink / raw)
To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Vladimir Barinov
This supports SDHI0 on H3ULCB board SD card slot
Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
Changes in version 3:
- initially added
Changes in version 4:
- added sd-uhs-sdr50
Changes in version 5:
- nothing
---
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 49 ++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 6842597..babe41c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -44,6 +44,30 @@
gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
};
};
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
};
&extal_clk {
@@ -78,6 +102,18 @@
function = "avb";
};
+ sdhi0_pins_3v3: sd0_3v3 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_1v8: sd0_1v8 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
usb1_pins: usb1 {
groups = "usb1";
function = "usb1";
@@ -108,6 +144,19 @@
status = "okay";
};
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins_3v3>;
+ pinctrl-1 = <&sdhi0_pins_1v8>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
&wdt0 {
timeout-sec = <60>;
status = "okay";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 3/4] arm64: dts: h3ulcb: enable SDHI0
@ 2016-09-02 16:25 ` Vladimir Barinov
0 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:25 UTC (permalink / raw)
To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
Cc: devicetree, linux-renesas-soc, Vladimir Barinov
This supports SDHI0 on H3ULCB board SD card slot
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes in version 3:
- initially added
Changes in version 4:
- added sd-uhs-sdr50
Changes in version 5:
- nothing
---
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 49 ++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 6842597..babe41c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -44,6 +44,30 @@
gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
};
};
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
};
&extal_clk {
@@ -78,6 +102,18 @@
function = "avb";
};
+ sdhi0_pins_3v3: sd0_3v3 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_1v8: sd0_1v8 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
usb1_pins: usb1 {
groups = "usb1";
function = "usb1";
@@ -108,6 +144,19 @@
status = "okay";
};
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins_3v3>;
+ pinctrl-1 = <&sdhi0_pins_1v8>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
&wdt0 {
timeout-sec = <60>;
status = "okay";
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support
2016-09-02 16:23 ` Vladimir Barinov
@ 2016-09-02 16:25 ` Vladimir Barinov
-1 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:25 UTC (permalink / raw)
To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Vladimir Barinov
This supports SSI sound for H3ULCB board.
SSI DMA mode used. CS2000 used as AUDIO_CLK_B.
Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
---
Changes in version 3:
- initially added
Changes in version 4:
- added comment for audio_clkout
Changes in version 5:
- renamed x12_clk node to x12
- renamed clk_multiplier node to clk-multiplier
- renamed audio_clkout node to audio-clkout
- renamed sound_clk node to sound-clk
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 115 +++++++++++++++++++++++++
1 file changed, 115 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index bbd7928..a254231 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -45,6 +45,12 @@
};
};
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
@@ -68,6 +74,32 @@
states = <3300000 1
1800000 0>;
};
+
+ audio_clkout: audio-clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
+ rsnd_ak4613: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcpu>;
+ simple-audio-card,frame-master = <&sndcpu>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4613>;
+ };
+ };
};
&extal_clk {
@@ -113,6 +141,17 @@
power-source = <1800>;
};
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound-clk {
+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+ "audio_clkout_a", "audio_clkout3_a";
+ function = "audio_clk";
+ };
+
usb1_pins: usb1 {
groups = "usb1";
function = "usb1";
@@ -136,6 +176,73 @@
pinctrl-names = "default";
status = "okay";
+
+ clock-frequency = <100000>;
+
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 3>;
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+ };
+
+ cs2000: clk-multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <11289600>;
+
+ status = "okay";
+
+ /* update <audio_clk_b> to <cs2000> */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&cs2000>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
+ };
};
&sdhi0 {
@@ -150,11 +257,19 @@
status = "okay";
};
+&ssi1 {
+ shared-pin;
+};
+
&wdt0 {
timeout-sec = <60>;
status = "okay";
};
+&audio_clk_a {
+ clock-frequency = <22579200>;
+};
+
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support
@ 2016-09-02 16:25 ` Vladimir Barinov
0 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:25 UTC (permalink / raw)
To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
Cc: devicetree, linux-renesas-soc, Vladimir Barinov
This supports SSI sound for H3ULCB board.
SSI DMA mode used. CS2000 used as AUDIO_CLK_B.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
Changes in version 3:
- initially added
Changes in version 4:
- added comment for audio_clkout
Changes in version 5:
- renamed x12_clk node to x12
- renamed clk_multiplier node to clk-multiplier
- renamed audio_clkout node to audio-clkout
- renamed sound_clk node to sound-clk
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 115 +++++++++++++++++++++++++
1 file changed, 115 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index bbd7928..a254231 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -45,6 +45,12 @@
};
};
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
@@ -68,6 +74,32 @@
states = <3300000 1
1800000 0>;
};
+
+ audio_clkout: audio-clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
+ rsnd_ak4613: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcpu>;
+ simple-audio-card,frame-master = <&sndcpu>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4613>;
+ };
+ };
};
&extal_clk {
@@ -113,6 +141,17 @@
power-source = <1800>;
};
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound-clk {
+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+ "audio_clkout_a", "audio_clkout3_a";
+ function = "audio_clk";
+ };
+
usb1_pins: usb1 {
groups = "usb1";
function = "usb1";
@@ -136,6 +176,73 @@
pinctrl-names = "default";
status = "okay";
+
+ clock-frequency = <100000>;
+
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 3>;
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+ };
+
+ cs2000: clk-multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <11289600>;
+
+ status = "okay";
+
+ /* update <audio_clk_b> to <cs2000> */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&cs2000>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
+ };
};
&sdhi0 {
@@ -150,11 +257,19 @@
status = "okay";
};
+&ssi1 {
+ shared-pin;
+};
+
&wdt0 {
timeout-sec = <60>;
status = "okay";
};
+&audio_clk_a {
+ clock-frequency = <22579200>;
+};
+
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support
2016-09-02 16:25 ` Vladimir Barinov
@ 2016-09-05 0:27 ` Kuninori Morimoto
-1 siblings, 0 replies; 20+ messages in thread
From: Kuninori Morimoto @ 2016-09-05 0:27 UTC (permalink / raw)
To: Vladimir Barinov
Cc: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA
Hi
> This supports SSI sound for H3ULCB board.
> SSI DMA mode used. CS2000 used as AUDIO_CLK_B.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support
@ 2016-09-05 0:27 ` Kuninori Morimoto
0 siblings, 0 replies; 20+ messages in thread
From: Kuninori Morimoto @ 2016-09-05 0:27 UTC (permalink / raw)
To: Vladimir Barinov
Cc: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland, devicetree,
linux-renesas-soc
Hi
> This supports SSI sound for H3ULCB board.
> SSI DMA mode used. CS2000 used as AUDIO_CLK_B.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys
2016-09-02 16:24 ` Vladimir Barinov
(?)
@ 2016-09-05 7:57 ` Geert Uytterhoeven
[not found] ` <CAMuHMdWXq8enfSUcwFK=6NXoZgJkqo=iScjO8A3ZO-sGrcxb4w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
-1 siblings, 1 reply; 20+ messages in thread
From: Geert Uytterhoeven @ 2016-09-05 7:57 UTC (permalink / raw)
To: Vladimir Barinov
Cc: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland, devicetree,
Linux-Renesas
On Fri, Sep 2, 2016 at 6:24 PM, Vladimir Barinov
<vladimir.barinov@cogentembedded.com> wrote:
> This supports GPIO keys on H3ULCB board
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys
2016-09-05 7:57 ` Geert Uytterhoeven
@ 2016-09-05 12:17 ` Simon Horman
0 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:17 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Vladimir Barinov, Magnus Damm, Rob Herring, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA, Linux-Renesas
On Mon, Sep 05, 2016 at 09:57:21AM +0200, Geert Uytterhoeven wrote:
> On Fri, Sep 2, 2016 at 6:24 PM, Vladimir Barinov
> <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> wrote:
> > This supports GPIO keys on H3ULCB board
> >
> > Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Thanks, I have queued this up.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys
@ 2016-09-05 12:17 ` Simon Horman
0 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:17 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Vladimir Barinov, Magnus Damm, Rob Herring, Mark Rutland,
devicetree, Linux-Renesas
On Mon, Sep 05, 2016 at 09:57:21AM +0200, Geert Uytterhoeven wrote:
> On Fri, Sep 2, 2016 at 6:24 PM, Vladimir Barinov
> <vladimir.barinov@cogentembedded.com> wrote:
> > This supports GPIO keys on H3ULCB board
> >
> > Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Thanks, I have queued this up.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v5 3/4] arm64: dts: h3ulcb: enable SDHI0
2016-09-02 16:25 ` Vladimir Barinov
@ 2016-09-05 12:25 ` Simon Horman
-1 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:25 UTC (permalink / raw)
To: Vladimir Barinov
Cc: Magnus Damm, Rob Herring, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA
On Fri, Sep 02, 2016 at 07:25:08PM +0300, Vladimir Barinov wrote:
> This supports SDHI0 on H3ULCB board SD card slot
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Thanks, I have queued this up.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v5 3/4] arm64: dts: h3ulcb: enable SDHI0
@ 2016-09-05 12:25 ` Simon Horman
0 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:25 UTC (permalink / raw)
To: Vladimir Barinov
Cc: Magnus Damm, Rob Herring, Mark Rutland, devicetree, linux-renesas-soc
On Fri, Sep 02, 2016 at 07:25:08PM +0300, Vladimir Barinov wrote:
> This supports SDHI0 on H3ULCB board SD card slot
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Thanks, I have queued this up.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support
2016-09-05 0:27 ` Kuninori Morimoto
@ 2016-09-05 12:26 ` Simon Horman
-1 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:26 UTC (permalink / raw)
To: Kuninori Morimoto
Cc: Vladimir Barinov, Magnus Damm, Rob Herring, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA
On Mon, Sep 05, 2016 at 12:27:30AM +0000, Kuninori Morimoto wrote:
>
> Hi
>
> > This supports SSI sound for H3ULCB board.
> > SSI DMA mode used. CS2000 used as AUDIO_CLK_B.
> >
> > Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> > Acked-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
>
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Thanks, I have queued this up.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support
@ 2016-09-05 12:26 ` Simon Horman
0 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:26 UTC (permalink / raw)
To: Kuninori Morimoto
Cc: Vladimir Barinov, Magnus Damm, Rob Herring, Mark Rutland,
devicetree, linux-renesas-soc
On Mon, Sep 05, 2016 at 12:27:30AM +0000, Kuninori Morimoto wrote:
>
> Hi
>
> > This supports SSI sound for H3ULCB board.
> > SSI DMA mode used. CS2000 used as AUDIO_CLK_B.
> >
> > Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> > Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Thanks, I have queued this up.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v5 1/4] arm64: dts: h3ulcb: enable GPIO leds
2016-09-02 16:24 ` Vladimir Barinov
(?)
@ 2016-09-05 12:26 ` Simon Horman
-1 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:26 UTC (permalink / raw)
To: Vladimir Barinov
Cc: Magnus Damm, Rob Herring, Mark Rutland, devicetree, linux-renesas-soc
On Fri, Sep 02, 2016 at 07:24:48PM +0300, Vladimir Barinov wrote:
> This supports GPIO leds on H3ULCB board
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Changes in version 3:
> - initially added
> Changes in version 4:
> - removed led4 in favor of gpio-keys
> - added label
> Changes in version 5:
> - nothing
>
> arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> index fb694b8..3329f78 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> @@ -31,6 +31,19 @@
> /* first 128MB is reserved for secure area. */
> reg = <0x0 0x48000000 0x0 0x38000000>;
> };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led5 {
> + label = "LED5";
> + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
> + };
> + led6 {
> + label = "LED6";
> + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
> + };
> + };
> };
Please remove the label properties.
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2016-09-05 12:32 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-02 16:23 [PATCH v5 0/4] arm64: renesas: enable H3ULCB board peripherals Vladimir Barinov
2016-09-02 16:23 ` Vladimir Barinov
[not found] ` <1472833419-26139-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2016-09-02 16:24 ` [PATCH v5 1/4] arm64: dts: h3ulcb: enable GPIO leds Vladimir Barinov
2016-09-02 16:24 ` Vladimir Barinov
2016-09-05 12:26 ` Simon Horman
2016-09-02 16:24 ` [PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys Vladimir Barinov
2016-09-02 16:24 ` Vladimir Barinov
2016-09-05 7:57 ` Geert Uytterhoeven
[not found] ` <CAMuHMdWXq8enfSUcwFK=6NXoZgJkqo=iScjO8A3ZO-sGrcxb4w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-09-05 12:17 ` Simon Horman
2016-09-05 12:17 ` Simon Horman
2016-09-02 16:25 ` [PATCH v5 3/4] arm64: dts: h3ulcb: enable SDHI0 Vladimir Barinov
2016-09-02 16:25 ` Vladimir Barinov
[not found] ` <1472833508-26267-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2016-09-05 12:25 ` Simon Horman
2016-09-05 12:25 ` Simon Horman
2016-09-02 16:25 ` [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support Vladimir Barinov
2016-09-02 16:25 ` Vladimir Barinov
[not found] ` <1472833529-26308-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2016-09-05 0:27 ` Kuninori Morimoto
2016-09-05 0:27 ` Kuninori Morimoto
[not found] ` <8737lf42rx.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
2016-09-05 12:26 ` Simon Horman
2016-09-05 12:26 ` Simon Horman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.