All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v5 0/4] arm64: renesas: enable H3ULCB board peripherals
@ 2016-09-02 16:23 ` Vladimir Barinov
  0 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:23 UTC (permalink / raw)
  To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
  Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Vladimir Barinov

Hello,

This adds the folowing:
- R8A7795 SoC based H3ULCB board peripherals

Vladimir Barinov (4):
[1/4] arm64: dts: h3ulcb: enable GPIO leds
[2/4] arm64: dts: h3ulcb: enable GPIO keys
[3/4] arm64: dts: h3ulcb: enable SDHI0
[4/4] arm64: dts: h3ulcb: Sound SSI support

---
This patchset is against the 'kernel/git/horms/renesas.git' repo.

 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts     | 189 +++++++++++++++++++++++++
 1 file changed, 189 insertions(+)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 0/4] arm64: renesas: enable H3ULCB board peripherals
@ 2016-09-02 16:23 ` Vladimir Barinov
  0 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:23 UTC (permalink / raw)
  To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
  Cc: devicetree, linux-renesas-soc, Vladimir Barinov

Hello,

This adds the folowing:
- R8A7795 SoC based H3ULCB board peripherals

Vladimir Barinov (4):
[1/4] arm64: dts: h3ulcb: enable GPIO leds
[2/4] arm64: dts: h3ulcb: enable GPIO keys
[3/4] arm64: dts: h3ulcb: enable SDHI0
[4/4] arm64: dts: h3ulcb: Sound SSI support

---
This patchset is against the 'kernel/git/horms/renesas.git' repo.

 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts     | 189 +++++++++++++++++++++++++
 1 file changed, 189 insertions(+)

^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 1/4] arm64: dts: h3ulcb: enable GPIO leds
  2016-09-02 16:23 ` Vladimir Barinov
@ 2016-09-02 16:24     ` Vladimir Barinov
  -1 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:24 UTC (permalink / raw)
  To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
  Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Vladimir Barinov

This supports GPIO leds on H3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
Changes in version 3:
- initially added
Changes in version 4:
- removed led4 in favor of gpio-keys
- added label
Changes in version 5:
- nothing

 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index fb694b8..3329f78 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -31,6 +31,19 @@
 		/* first 128MB is reserved for secure area. */
 		reg = <0x0 0x48000000 0x0 0x38000000>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led5 {
+			label = "LED5";
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+		led6 {
+			label = "LED6";
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };
 
 &extal_clk {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH v5 1/4] arm64: dts: h3ulcb: enable GPIO leds
@ 2016-09-02 16:24     ` Vladimir Barinov
  0 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:24 UTC (permalink / raw)
  To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
  Cc: devicetree, linux-renesas-soc, Vladimir Barinov

This supports GPIO leds on H3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes in version 3:
- initially added
Changes in version 4:
- removed led4 in favor of gpio-keys
- added label
Changes in version 5:
- nothing

 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index fb694b8..3329f78 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -31,6 +31,19 @@
 		/* first 128MB is reserved for secure area. */
 		reg = <0x0 0x48000000 0x0 0x38000000>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led5 {
+			label = "LED5";
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+		led6 {
+			label = "LED6";
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };
 
 &extal_clk {
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys
  2016-09-02 16:23 ` Vladimir Barinov
@ 2016-09-02 16:24     ` Vladimir Barinov
  -1 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:24 UTC (permalink / raw)
  To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
  Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Vladimir Barinov

This supports GPIO keys on H3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
---
Changes in version 4:
- initially added
Changes in version 5:
- nothing

 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 14 +++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index fb694b8..3329f78 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -12,6 +12,7 @@
 /dts-v1/;
 #include "r8a7795.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Renesas H3ULCB board based on r8a7795";
@@ -31,6 +31,18 @@
 		/* first 128MB is reserved for secure area. */
 		reg = <0x0 0x48000000 0x0 0x38000000>;
 	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		};
+	};
 
 	leds {
 		compatible = "gpio-leds";
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys
@ 2016-09-02 16:24     ` Vladimir Barinov
  0 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:24 UTC (permalink / raw)
  To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
  Cc: devicetree, linux-renesas-soc, Vladimir Barinov

This supports GPIO keys on H3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
---
Changes in version 4:
- initially added
Changes in version 5:
- nothing

 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 14 +++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index fb694b8..3329f78 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -12,6 +12,7 @@
 /dts-v1/;
 #include "r8a7795.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Renesas H3ULCB board based on r8a7795";
@@ -31,6 +31,18 @@
 		/* first 128MB is reserved for secure area. */
 		reg = <0x0 0x48000000 0x0 0x38000000>;
 	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		};
+	};
 
 	leds {
 		compatible = "gpio-leds";
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH v5 3/4] arm64: dts: h3ulcb: enable SDHI0
  2016-09-02 16:23 ` Vladimir Barinov
@ 2016-09-02 16:25     ` Vladimir Barinov
  -1 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:25 UTC (permalink / raw)
  To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
  Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Vladimir Barinov

This supports SDHI0 on H3ULCB board SD card slot

Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
Changes in version 3:
- initially added
Changes in version 4:
- added sd-uhs-sdr50
Changes in version 5:
- nothing

---
 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 49 ++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 6842597..babe41c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -44,6 +44,30 @@
 			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
 };
 
 &extal_clk {
@@ -78,6 +102,18 @@
 		function = "avb";
 	};
 
+	sdhi0_pins_3v3: sd0_3v3 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_1v8: sd0_1v8 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
 	usb1_pins: usb1 {
 		groups = "usb1";
 		function = "usb1";
@@ -108,6 +144,19 @@
 	status = "okay";
 };
 
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins_3v3>;
+	pinctrl-1 = <&sdhi0_pins_1v8>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
 &wdt0 {
 	timeout-sec = <60>;
 	status = "okay";
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH v5 3/4] arm64: dts: h3ulcb: enable SDHI0
@ 2016-09-02 16:25     ` Vladimir Barinov
  0 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:25 UTC (permalink / raw)
  To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
  Cc: devicetree, linux-renesas-soc, Vladimir Barinov

This supports SDHI0 on H3ULCB board SD card slot

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes in version 3:
- initially added
Changes in version 4:
- added sd-uhs-sdr50
Changes in version 5:
- nothing

---
 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 49 ++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 6842597..babe41c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -44,6 +44,30 @@
 			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
 };
 
 &extal_clk {
@@ -78,6 +102,18 @@
 		function = "avb";
 	};
 
+	sdhi0_pins_3v3: sd0_3v3 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_1v8: sd0_1v8 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
 	usb1_pins: usb1 {
 		groups = "usb1";
 		function = "usb1";
@@ -108,6 +144,19 @@
 	status = "okay";
 };
 
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins_3v3>;
+	pinctrl-1 = <&sdhi0_pins_1v8>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
 &wdt0 {
 	timeout-sec = <60>;
 	status = "okay";
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support
  2016-09-02 16:23 ` Vladimir Barinov
@ 2016-09-02 16:25     ` Vladimir Barinov
  -1 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:25 UTC (permalink / raw)
  To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
  Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Vladimir Barinov

This supports SSI sound for H3ULCB board.
SSI DMA mode used. CS2000 used as AUDIO_CLK_B.

Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
---
Changes in version 3:
- initially added
Changes in version 4:
- added comment for audio_clkout
Changes in version 5:
- renamed x12_clk node to x12
- renamed clk_multiplier node to clk-multiplier
- renamed audio_clkout node to audio-clkout
- renamed sound_clk node to sound-clk

 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 115 +++++++++++++++++++++++++
 1 file changed, 115 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index bbd7928..a254231 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -45,6 +45,12 @@
 		};
 	};
 
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -68,6 +74,32 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4613: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4613>;
+		};
+	};
 };
 
 &extal_clk {
@@ -113,6 +141,17 @@
 		power-source = <1800>;
 	};
 
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout3_a";
+		function = "audio_clk";
+	};
+
 	usb1_pins: usb1 {
 		groups = "usb1";
 		function = "usb1";
@@ -136,6 +176,73 @@
 	pinctrl-names = "default";
 
 	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+			capture  = <&ssi1 &src1 &dvc1>;
+		};
+	};
 };
 
 &sdhi0 {
@@ -150,11 +257,19 @@
 	status = "okay";
 };
 
+&ssi1 {
+	shared-pin;
+};
+
 &wdt0 {
 	timeout-sec = <60>;
 	status = "okay";
 };
 
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
 &avb {
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support
@ 2016-09-02 16:25     ` Vladimir Barinov
  0 siblings, 0 replies; 20+ messages in thread
From: Vladimir Barinov @ 2016-09-02 16:25 UTC (permalink / raw)
  To: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
  Cc: devicetree, linux-renesas-soc, Vladimir Barinov

This supports SSI sound for H3ULCB board.
SSI DMA mode used. CS2000 used as AUDIO_CLK_B.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
Changes in version 3:
- initially added
Changes in version 4:
- added comment for audio_clkout
Changes in version 5:
- renamed x12_clk node to x12
- renamed clk_multiplier node to clk-multiplier
- renamed audio_clkout node to audio-clkout
- renamed sound_clk node to sound-clk

 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 115 +++++++++++++++++++++++++
 1 file changed, 115 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index bbd7928..a254231 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -45,6 +45,12 @@
 		};
 	};
 
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -68,6 +74,32 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4613: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4613>;
+		};
+	};
 };
 
 &extal_clk {
@@ -113,6 +141,17 @@
 		power-source = <1800>;
 	};
 
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout3_a";
+		function = "audio_clk";
+	};
+
 	usb1_pins: usb1 {
 		groups = "usb1";
 		function = "usb1";
@@ -136,6 +176,73 @@
 	pinctrl-names = "default";
 
 	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+			capture  = <&ssi1 &src1 &dvc1>;
+		};
+	};
 };
 
 &sdhi0 {
@@ -150,11 +257,19 @@
 	status = "okay";
 };
 
+&ssi1 {
+	shared-pin;
+};
+
 &wdt0 {
 	timeout-sec = <60>;
 	status = "okay";
 };
 
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
 &avb {
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support
  2016-09-02 16:25     ` Vladimir Barinov
@ 2016-09-05  0:27         ` Kuninori Morimoto
  -1 siblings, 0 replies; 20+ messages in thread
From: Kuninori Morimoto @ 2016-09-05  0:27 UTC (permalink / raw)
  To: Vladimir Barinov
  Cc: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA


Hi 

> This supports SSI sound for H3ULCB board.
> SSI DMA mode used. CS2000 used as AUDIO_CLK_B.
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support
@ 2016-09-05  0:27         ` Kuninori Morimoto
  0 siblings, 0 replies; 20+ messages in thread
From: Kuninori Morimoto @ 2016-09-05  0:27 UTC (permalink / raw)
  To: Vladimir Barinov
  Cc: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland, devicetree,
	linux-renesas-soc


Hi 

> This supports SSI sound for H3ULCB board.
> SSI DMA mode used. CS2000 used as AUDIO_CLK_B.
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys
  2016-09-02 16:24     ` Vladimir Barinov
  (?)
@ 2016-09-05  7:57     ` Geert Uytterhoeven
       [not found]       ` <CAMuHMdWXq8enfSUcwFK=6NXoZgJkqo=iScjO8A3ZO-sGrcxb4w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
  -1 siblings, 1 reply; 20+ messages in thread
From: Geert Uytterhoeven @ 2016-09-05  7:57 UTC (permalink / raw)
  To: Vladimir Barinov
  Cc: Simon Horman, Magnus Damm, Rob Herring, Mark Rutland, devicetree,
	Linux-Renesas

On Fri, Sep 2, 2016 at 6:24 PM, Vladimir Barinov
<vladimir.barinov@cogentembedded.com> wrote:
> This supports GPIO keys on H3ULCB board
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys
  2016-09-05  7:57     ` Geert Uytterhoeven
@ 2016-09-05 12:17           ` Simon Horman
  0 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:17 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Vladimir Barinov, Magnus Damm, Rob Herring, Mark Rutland,
	devicetree-u79uwXL29TY76Z2rM5mHXA, Linux-Renesas

On Mon, Sep 05, 2016 at 09:57:21AM +0200, Geert Uytterhoeven wrote:
> On Fri, Sep 2, 2016 at 6:24 PM, Vladimir Barinov
> <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> wrote:
> > This supports GPIO keys on H3ULCB board
> >
> > Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>

Thanks, I have queued this up.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys
@ 2016-09-05 12:17           ` Simon Horman
  0 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:17 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Vladimir Barinov, Magnus Damm, Rob Herring, Mark Rutland,
	devicetree, Linux-Renesas

On Mon, Sep 05, 2016 at 09:57:21AM +0200, Geert Uytterhoeven wrote:
> On Fri, Sep 2, 2016 at 6:24 PM, Vladimir Barinov
> <vladimir.barinov@cogentembedded.com> wrote:
> > This supports GPIO keys on H3ULCB board
> >
> > Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, I have queued this up.

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 3/4] arm64: dts: h3ulcb: enable SDHI0
  2016-09-02 16:25     ` Vladimir Barinov
@ 2016-09-05 12:25         ` Simon Horman
  -1 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:25 UTC (permalink / raw)
  To: Vladimir Barinov
  Cc: Magnus Damm, Rob Herring, Mark Rutland,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA

On Fri, Sep 02, 2016 at 07:25:08PM +0300, Vladimir Barinov wrote:
> This supports SDHI0 on H3ULCB board SD card slot
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>

Thanks, I have queued this up.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 3/4] arm64: dts: h3ulcb: enable SDHI0
@ 2016-09-05 12:25         ` Simon Horman
  0 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:25 UTC (permalink / raw)
  To: Vladimir Barinov
  Cc: Magnus Damm, Rob Herring, Mark Rutland, devicetree, linux-renesas-soc

On Fri, Sep 02, 2016 at 07:25:08PM +0300, Vladimir Barinov wrote:
> This supports SDHI0 on H3ULCB board SD card slot
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, I have queued this up.

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support
  2016-09-05  0:27         ` Kuninori Morimoto
@ 2016-09-05 12:26             ` Simon Horman
  -1 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:26 UTC (permalink / raw)
  To: Kuninori Morimoto
  Cc: Vladimir Barinov, Magnus Damm, Rob Herring, Mark Rutland,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA

On Mon, Sep 05, 2016 at 12:27:30AM +0000, Kuninori Morimoto wrote:
> 
> Hi 
> 
> > This supports SSI sound for H3ULCB board.
> > SSI DMA mode used. CS2000 used as AUDIO_CLK_B.
> > 
> > Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> > Acked-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> 
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>

Thanks, I have queued this up.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support
@ 2016-09-05 12:26             ` Simon Horman
  0 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:26 UTC (permalink / raw)
  To: Kuninori Morimoto
  Cc: Vladimir Barinov, Magnus Damm, Rob Herring, Mark Rutland,
	devicetree, linux-renesas-soc

On Mon, Sep 05, 2016 at 12:27:30AM +0000, Kuninori Morimoto wrote:
> 
> Hi 
> 
> > This supports SSI sound for H3ULCB board.
> > SSI DMA mode used. CS2000 used as AUDIO_CLK_B.
> > 
> > Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> > Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> 
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Thanks, I have queued this up.

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 1/4] arm64: dts: h3ulcb: enable GPIO leds
  2016-09-02 16:24     ` Vladimir Barinov
  (?)
@ 2016-09-05 12:26     ` Simon Horman
  -1 siblings, 0 replies; 20+ messages in thread
From: Simon Horman @ 2016-09-05 12:26 UTC (permalink / raw)
  To: Vladimir Barinov
  Cc: Magnus Damm, Rob Herring, Mark Rutland, devicetree, linux-renesas-soc

On Fri, Sep 02, 2016 at 07:24:48PM +0300, Vladimir Barinov wrote:
> This supports GPIO leds on H3ULCB board
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Changes in version 3:
> - initially added
> Changes in version 4:
> - removed led4 in favor of gpio-keys
> - added label
> Changes in version 5:
> - nothing
> 
>  arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> index fb694b8..3329f78 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> @@ -31,6 +31,19 @@
>  		/* first 128MB is reserved for secure area. */
>  		reg = <0x0 0x48000000 0x0 0x38000000>;
>  	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led5 {
> +			label = "LED5";
> +			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
> +		};
> +		led6 {
> +			label = "LED6";
> +			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
>  };

Please remove the label properties.

^ permalink raw reply	[flat|nested] 20+ messages in thread

end of thread, other threads:[~2016-09-05 12:32 UTC | newest]

Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-02 16:23 [PATCH v5 0/4] arm64: renesas: enable H3ULCB board peripherals Vladimir Barinov
2016-09-02 16:23 ` Vladimir Barinov
     [not found] ` <1472833419-26139-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2016-09-02 16:24   ` [PATCH v5 1/4] arm64: dts: h3ulcb: enable GPIO leds Vladimir Barinov
2016-09-02 16:24     ` Vladimir Barinov
2016-09-05 12:26     ` Simon Horman
2016-09-02 16:24   ` [PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys Vladimir Barinov
2016-09-02 16:24     ` Vladimir Barinov
2016-09-05  7:57     ` Geert Uytterhoeven
     [not found]       ` <CAMuHMdWXq8enfSUcwFK=6NXoZgJkqo=iScjO8A3ZO-sGrcxb4w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-09-05 12:17         ` Simon Horman
2016-09-05 12:17           ` Simon Horman
2016-09-02 16:25   ` [PATCH v5 3/4] arm64: dts: h3ulcb: enable SDHI0 Vladimir Barinov
2016-09-02 16:25     ` Vladimir Barinov
     [not found]     ` <1472833508-26267-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2016-09-05 12:25       ` Simon Horman
2016-09-05 12:25         ` Simon Horman
2016-09-02 16:25   ` [PATCH v5 4/4] arm64: dts: h3ulcb: Sound SSI support Vladimir Barinov
2016-09-02 16:25     ` Vladimir Barinov
     [not found]     ` <1472833529-26308-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2016-09-05  0:27       ` Kuninori Morimoto
2016-09-05  0:27         ` Kuninori Morimoto
     [not found]         ` <8737lf42rx.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
2016-09-05 12:26           ` Simon Horman
2016-09-05 12:26             ` Simon Horman

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.