From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from relmlor2.renesas.com ([210.160.252.172]:63531 "EHLO relmlie1.idc.renesas.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753839AbcIKVEM (ORCPT ); Sun, 11 Sep 2016 17:04:12 -0400 From: Chris Brandt To: Ulf Hansson , Wolfram Sang , Sergei Shtylyov , Geert Uytterhoeven Cc: Simon Horman , linux-mmc@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Chris Brandt Subject: [PATCH v2 0/3] mmc: sh_mobile_sdhi: Add r7s72100 support Date: Sun, 11 Sep 2016 17:03:25 -0400 Message-Id: <20160911210328.30641-1-chris.brandt@renesas.com> Sender: linux-renesas-soc-owner@vger.kernel.org List-ID: For the most part, the SDHI controller in the RZ/A1 (r7s72100) is the same as other Renesas SoC...except for the fact that the data port register was widened to 32-bits and the 16-bit accesses in the current tmio driver aren't going to cut it. Also, the tmio driver allows you to pass in what voltages you support via the ocr_mask. For the RZ/A1, it's just simple 3.3v. So, I added the ability to pass that when using DT. Chris Brandt (3): mmc: sh_mobile_sdhi: add ocr_mask option mmc: tmio-mmc: add support for 32bit data port mmc: sh_mobile_sdhi: Add r7s72100 support Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 1 + drivers/mmc/host/sh_mobile_sdhi.c | 9 ++++++ drivers/mmc/host/tmio_mmc.h | 12 ++++++++ drivers/mmc/host/tmio_mmc_pio.c | 35 ++++++++++++++++++++++ include/linux/mfd/tmio.h | 5 ++++ 5 files changed, 62 insertions(+) -- 2.9.2