From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934118AbcIOIWR (ORCPT ); Thu, 15 Sep 2016 04:22:17 -0400 Received: from mga01.intel.com ([192.55.52.88]:28036 "EHLO mga01.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1763275AbcIOIUm (ORCPT ); Thu, 15 Sep 2016 04:20:42 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.30,338,1470726000"; d="scan'208";a="8840566" Date: Thu, 15 Sep 2016 11:20:37 +0300 From: Jarkko Sakkinen To: "Winkler, Tomas" Cc: "tpmdd-devel@lists.sourceforge.net" , Jason Gunthorpe , "linux-kernel@vger.kernel.org" Subject: Re: [PATCH v3 1/4] tpm/tpm_crb: implement tpm crb idle state Message-ID: <20160915082037.GA16233@intel.com> References: <1473685461-6540-1-git-send-email-tomas.winkler@intel.com> <1473685461-6540-2-git-send-email-tomas.winkler@intel.com> <20160915062204.GA12289@intel.com> <5B8DA87D05A7694D9FA63FD143655C1B542DBC0D@hasmsx108.ger.corp.intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5B8DA87D05A7694D9FA63FD143655C1B542DBC0D@hasmsx108.ger.corp.intel.com> Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo User-Agent: Mutt/1.5.24 (2015-08-30) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Thu, Sep 15, 2016 at 06:28:27AM +0000, Winkler, Tomas wrote: > > Subject: Re: [PATCH v3 1/4] tpm/tpm_crb: implement tpm crb idle state > > > > On Mon, Sep 12, 2016 at 04:04:18PM +0300, Tomas Winkler wrote: > > > The register TPM_CRB_CTRL_REQ_x contains bits goIdle and cmdReady for > > > SW to indicate that the device can enter or should exit the idle state. > > > > > > The legacy ACPI-start (SMI + DMA) based devices do not support these > > > bits and the idle state management is not exposed to the host SW. > > > Thus, this functionality only is enabled only for a CRB start (MMIO) > > > based devices. > > > > > > Based on Jarkko Sakkinen oringal > > > patch: > > > 'tpm_crb: implement power tpm crb power management' > > > > > > > > > Signed-off-by: Tomas Winkler > > > --- > > > V2: do not export the functions via tpm ops > > > V3: fix lower case corruption; adjust function documentation > > > > > > drivers/char/tpm/tpm_crb.c | 69 > > > ++++++++++++++++++++++++++++++++++++++++++++++ > > > 1 file changed, 69 insertions(+) > > > > > > diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c > > > index 6e9d1bca712f..b6923a8b3ff7 100644 > > > --- a/drivers/char/tpm/tpm_crb.c > > > +++ b/drivers/char/tpm/tpm_crb.c > > > @@ -83,6 +83,75 @@ struct crb_priv { > > > u32 cmd_size; > > > }; > > > > > > +/** > > > + * crb_go_idle - request tpm crb device to go the idle state > > > + * > > > + * @dev: crb device > > > + * @priv: crb private data > > > + * > > > + * Write CRB_CTRL_REQ_GO_IDLE to TPM_CRB_CTRL_REQ > > > + * The device should respond within TIMEOUT_C by clearing the bit. > > > + * Anyhow, we do not wait here as a consequent CMD_READY request > > > + * will be handled correctly even if idle was not completed. > > > + * > > > + * The function does nothing for devices with ACPI-start method. > > > + * > > > + * Return: 0 always > > > + */ > > > +static int __maybe_unused crb_go_idle(struct device *dev, struct > > > +crb_priv *priv) { > > > + if (priv->flags & CRB_FL_ACPI_START) > > > + return 0; > > > + > > > + iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->cca->req); > > > + /* we don't really care when this settles */ > > > + > > > + return 0; > > > +} > > > + > > > +/** > > > + * crb_cmd_ready - request tpm crb device to enter ready state > > > + * > > > + * @dev: crb device > > > + * @priv: crb private data > > > + * > > > + * Write CRB_CTRL_REQ_CMD_READY to TPM_CRB_CTRL_REQ > > > + * and poll till the device acknowledge it by clearing the bit. > > > + * The device should respond within TIMEOUT_C. > > > + * > > > + * The function does nothing for devices with ACPI-start method > > > + * > > > + * Return: 0 on success -ETIME on timeout; */ static int > > > +__maybe_unused crb_cmd_ready(struct device *dev, > > > + struct crb_priv *priv) > > > +{ > > > + ktime_t stop, start; > > > + > > > + if (priv->flags & CRB_FL_ACPI_START) > > > + return 0; > > > + > > > + iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->cca->req); > > > + > > > + start = ktime_get(); > > > + stop = ktime_add(start, ms_to_ktime(TPM2_TIMEOUT_C)); > > > + do { > > > + if (!(ioread32(&priv->cca->req) & > > CRB_CTRL_REQ_CMD_READY)) { > > > + dev_dbg(dev, "cmdReady in %lld usecs\n", > > > + ktime_to_us(ktime_sub(ktime_get(), start))); > > > + return 0; > > > + } > > > + usleep_range(50, 100); > > > + } while (ktime_before(ktime_get(), stop)); > > > > Since this is HW specific this is right thing to do and not abuse > > wait_for_tpm_stat. However, this should be documented to the commit > > message. > I will respin just this patch and not the whole series, as the fix is only in the commit message. > Tomas Works for me. I can update pm_runtime_sync(). Then I'm ready to apply these. /Jarkko From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jarkko Sakkinen Subject: Re: [PATCH v3 1/4] tpm/tpm_crb: implement tpm crb idle state Date: Thu, 15 Sep 2016 11:20:37 +0300 Message-ID: <20160915082037.GA16233@intel.com> References: <1473685461-6540-1-git-send-email-tomas.winkler@intel.com> <1473685461-6540-2-git-send-email-tomas.winkler@intel.com> <20160915062204.GA12289@intel.com> <5B8DA87D05A7694D9FA63FD143655C1B542DBC0D@hasmsx108.ger.corp.intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <5B8DA87D05A7694D9FA63FD143655C1B542DBC0D-Jy8z56yoSI8MvF1YICWikbfspsVTdybXVpNB7YpNyf8@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: tpmdd-devel-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org To: "Winkler, Tomas" Cc: "tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org" , "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" List-Id: tpmdd-devel@lists.sourceforge.net On Thu, Sep 15, 2016 at 06:28:27AM +0000, Winkler, Tomas wrote: > > Subject: Re: [PATCH v3 1/4] tpm/tpm_crb: implement tpm crb idle state > > > > On Mon, Sep 12, 2016 at 04:04:18PM +0300, Tomas Winkler wrote: > > > The register TPM_CRB_CTRL_REQ_x contains bits goIdle and cmdReady for > > > SW to indicate that the device can enter or should exit the idle state. > > > > > > The legacy ACPI-start (SMI + DMA) based devices do not support these > > > bits and the idle state management is not exposed to the host SW. > > > Thus, this functionality only is enabled only for a CRB start (MMIO) > > > based devices. > > > > > > Based on Jarkko Sakkinen oringal > > > patch: > > > 'tpm_crb: implement power tpm crb power management' > > > > > > > > > Signed-off-by: Tomas Winkler > > > --- > > > V2: do not export the functions via tpm ops > > > V3: fix lower case corruption; adjust function documentation > > > > > > drivers/char/tpm/tpm_crb.c | 69 > > > ++++++++++++++++++++++++++++++++++++++++++++++ > > > 1 file changed, 69 insertions(+) > > > > > > diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c > > > index 6e9d1bca712f..b6923a8b3ff7 100644 > > > --- a/drivers/char/tpm/tpm_crb.c > > > +++ b/drivers/char/tpm/tpm_crb.c > > > @@ -83,6 +83,75 @@ struct crb_priv { > > > u32 cmd_size; > > > }; > > > > > > +/** > > > + * crb_go_idle - request tpm crb device to go the idle state > > > + * > > > + * @dev: crb device > > > + * @priv: crb private data > > > + * > > > + * Write CRB_CTRL_REQ_GO_IDLE to TPM_CRB_CTRL_REQ > > > + * The device should respond within TIMEOUT_C by clearing the bit. > > > + * Anyhow, we do not wait here as a consequent CMD_READY request > > > + * will be handled correctly even if idle was not completed. > > > + * > > > + * The function does nothing for devices with ACPI-start method. > > > + * > > > + * Return: 0 always > > > + */ > > > +static int __maybe_unused crb_go_idle(struct device *dev, struct > > > +crb_priv *priv) { > > > + if (priv->flags & CRB_FL_ACPI_START) > > > + return 0; > > > + > > > + iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->cca->req); > > > + /* we don't really care when this settles */ > > > + > > > + return 0; > > > +} > > > + > > > +/** > > > + * crb_cmd_ready - request tpm crb device to enter ready state > > > + * > > > + * @dev: crb device > > > + * @priv: crb private data > > > + * > > > + * Write CRB_CTRL_REQ_CMD_READY to TPM_CRB_CTRL_REQ > > > + * and poll till the device acknowledge it by clearing the bit. > > > + * The device should respond within TIMEOUT_C. > > > + * > > > + * The function does nothing for devices with ACPI-start method > > > + * > > > + * Return: 0 on success -ETIME on timeout; */ static int > > > +__maybe_unused crb_cmd_ready(struct device *dev, > > > + struct crb_priv *priv) > > > +{ > > > + ktime_t stop, start; > > > + > > > + if (priv->flags & CRB_FL_ACPI_START) > > > + return 0; > > > + > > > + iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->cca->req); > > > + > > > + start = ktime_get(); > > > + stop = ktime_add(start, ms_to_ktime(TPM2_TIMEOUT_C)); > > > + do { > > > + if (!(ioread32(&priv->cca->req) & > > CRB_CTRL_REQ_CMD_READY)) { > > > + dev_dbg(dev, "cmdReady in %lld usecs\n", > > > + ktime_to_us(ktime_sub(ktime_get(), start))); > > > + return 0; > > > + } > > > + usleep_range(50, 100); > > > + } while (ktime_before(ktime_get(), stop)); > > > > Since this is HW specific this is right thing to do and not abuse > > wait_for_tpm_stat. However, this should be documented to the commit > > message. > I will respin just this patch and not the whole series, as the fix is only in the commit message. > Tomas Works for me. I can update pm_runtime_sync(). Then I'm ready to apply these. /Jarkko ------------------------------------------------------------------------------