From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ondrej Zary Subject: Re: 4.7 regression: ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off Date: Wed, 28 Sep 2016 10:32:34 +0200 Message-ID: <201609281032.35190.linux@rainbow-software.org> References: <201609251512.05657.linux@rainbow-software.org> <4220489.2ZUOL1U5cK@vostro.rjw.lan> Mime-Version: 1.0 Content-Type: Text/Plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: Received: from smtp-1b.atlantis.sk ([80.94.52.26]:60653 "EHLO smtp-1b.atlantis.sk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751521AbcI1Icm (ORCPT ); Wed, 28 Sep 2016 04:32:42 -0400 In-Reply-To: Content-Disposition: inline Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: Sinan Kaya Cc: "Rafael J. Wysocki" , linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org, linux-pci@vger.kernel.org, Bjorn Helgaas On Wednesday 28 September 2016, Sinan Kaya wrote: > On 9/27/2016 6:58 PM, Rafael J. Wysocki wrote: > >> :040000 040000 9bf16c388d23bb66e087809f069eafed18e46a8c > >> : bcac95fb33ee834aec7d23eab9eb0dc5e330c68c M drivers > > > > OK > > > > Sinan, can you help, please? > > Sure, let's see what's going on. I was writing an email. > > Can we apply this and collect the kernel log? It also helps to see the > kernel log from a working combination. This is from yet another machine with the same problem: [ 0.000000] Linux version 4.8.0-rc8+ (zary@gsql) (gcc version 4.7.2 (Debian 4.7.2-5) ) #100 SMP Wed Sep 28 10:19:26 CEST 2016 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000006ffbfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000006ffc000-0x0000000006ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000006fff000-0x0000000006ffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: System Manufacturer System Name/A7VL133, BIOS ASUS A7VL133-VM ACPI BIOS Revision 1008 06/10/2002 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x6ffc max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FFC000000 write-back [ 0.000000] 1 base 004000000 mask FFE000000 write-back [ 0.000000] 2 base 006000000 mask FFF000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 base 0F8000000 mask FFC000000 write-combining [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] BRK [0x016b7000, 0x016b7fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6DA0 000014 (v00 ASUS ) [ 0.000000] ACPI: RSDT 0x0000000006FFC000 00002C (v01 ASUS A7VL133 30303031 MSFT 31313031) [ 0.000000] ACPI: FACP 0x0000000006FFC080 000074 (v01 ASUS A7VL133 30303031 MSFT 31313031) [ 0.000000] ACPI: DSDT 0x0000000006FFC100 0027F0 (v01 ASUS A7VL133 00001000 MSFT 0100000B) [ 0.000000] ACPI: FACS 0x0000000006FFF000 000040 [ 0.000000] ACPI: BOOT 0x0000000006FFC040 000028 (v01 ASUS A7VL133 30303031 MSFT 31313031) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 111MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 06ffc000 [ 0.000000] low ram: 0 - 06ffc000 [ 0.000000] BRK [0x016b8000, 0x016b8fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x0000000006ffbfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000006ffbfff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000006ffbfff] [ 0.000000] On node 0 totalpages: 28570 [ 0.000000] free_area_init_node: node 0, pgdat c15b1840, node_mem_map c6f1c020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 192 pages used for memmap [ 0.000000] Normal zone: 24572 pages, LIFO batch:3 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xe408 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x07000000-0xfffeffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 19 pages/cpu @c6f06000 s47980 r0 d29844 u77824 [ 0.000000] pcpu-alloc: s47980 r0 d29844 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28346 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=/dev/sda1 ro quiet [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 106224K/114280K available (3918K kernel code, 436K rwdata, 1520K rodata, 524K init, 412K bss, 8056K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xc77fc000 - 0xff7fe000 ( 896 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc6ffc000 ( 111 MB) [ 0.000000] .init : 0xc15c1000 - 0xc1644000 ( 524 kB) [ 0.000000] .data : 0xc13d3cc1 - 0xc15bf2e0 (1965 kB) [ 0.000000] .text : 0xc1000000 - 0xc13d3cc1 (3919 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:2304 nr_irqs:32 16 [ 0.000000] CPU 0 irqstacks, hard=c681c000 soft=c681e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 857.600 MHz processor [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 1715.20 BogoMIPS (lpj=3430400) [ 0.004022] pid_max: default: 32768 minimum: 301 [ 0.004068] ACPI: Core revision 20160422 [ 0.010184] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.010197] [ 0.010206] ACPI: setting ELCR to 0200 (from 0e20) [ 0.010294] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.010300] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.011345] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.011355] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.017561] Freeing SMP alternatives memory: 16K (c1644000 - c1648000) [ 0.018157] smpboot: Max logical packages: 1 [ 0.018168] smpboot: weird, boot CPU (#0) not listed by the BIOS [ 0.018171] smpboot: SMP motherboard not detected [ 0.018173] smpboot: SMP disabled [ 0.018181] smpboot: Local APIC not detected. Using dummy APIC emulation. [ 0.018187] Performance Events: [ 0.018197] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.018200] no hardware sampling interrupt available. [ 0.018207] AMD PMU driver. [ 0.018218] ... version: 0 [ 0.018222] ... bit width: 48 [ 0.018224] ... generic registers: 4 [ 0.018227] ... value mask: 0000ffffffffffff [ 0.018230] ... max period: 00007fffffffffff [ 0.018233] ... fixed-purpose events: 0 [ 0.018236] ... event mask: 000000000000000f [ 0.019597] x86: Booted up 1 node, 1 CPUs [ 0.019609] smpboot: Total of 1 processors activated (1715.20 BogoMIPS) [ 0.020276] devtmpfs: initialized [ 0.021405] PM: Registering ACPI NVS region [mem 0x06fff000-0x06ffffff] (4096 bytes) [ 0.021676] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.022170] NET: Registered protocol family 16 [ 0.022847] cpuidle: using governor ladder [ 0.022857] cpuidle: using governor menu [ 0.022964] Simple Boot Flag at 0x3a set to 0x1 [ 0.022988] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns [ 0.023009] ACPI: bus type PCI registered [ 0.029726] PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1 [ 0.029734] PCI: Using configuration type 1 for base access [ 0.035763] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.036523] ACPI: Added _OSI(Module Device) [ 0.036530] ACPI: Added _OSI(Processor Device) [ 0.036534] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.036538] ACPI: Added _OSI(Processor Aggregator Device) [ 0.040657] ACPI: Interpreter enabled [ 0.040744] ACPI: (supports S0 S1 S4 S5) [ 0.040753] ACPI: Using PIC for interrupt routing [ 0.040871] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.054034] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.054245] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.054444] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.054640] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.054855] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.054877] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [ 0.054898] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.054914] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.055070] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored) [ 0.055077] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored) [ 0.055085] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored) [ 0.055092] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored) [ 0.055097] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored) [ 0.055104] acpi PNP0A03:00: host bridge window [mem 0x07000000-0xffffffff window] (ignored) [ 0.055108] PCI: root bus 00: using default resources [ 0.055345] PCI host bridge to bus 0000:00 [ 0.055354] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.055361] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.055371] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.055417] pci 0000:00:00.0: [1106:0305] type 00 class 0x060000 [ 0.055444] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] [ 0.055810] pci 0000:00:01.0: [1106:8305] type 01 class 0x060400 [ 0.055872] pci 0000:00:01.0: supports D1 [ 0.056082] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.056321] pci 0000:00:07.0: [1106:0686] type 00 class 0x060100 [ 0.056689] pci 0000:00:07.1: [1106:0571] type 00 class 0x01018a [ 0.056741] pci 0000:00:07.1: reg 0x20: [io 0xd800-0xd80f] [ 0.056766] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.056771] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.056777] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.056782] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.057053] pci 0000:00:07.2: [1106:3038] type 00 class 0x0c0300 [ 0.057100] pci 0000:00:07.2: reg 0x20: [io 0xd400-0xd41f] [ 0.057243] pci 0000:00:07.2: System wakeup disabled by ACPI [ 0.057436] pci 0000:00:07.3: [1106:3038] type 00 class 0x0c0300 [ 0.057482] pci 0000:00:07.3: reg 0x20: [io 0xd000-0xd01f] [ 0.057625] pci 0000:00:07.3: System wakeup disabled by ACPI [ 0.057836] pci 0000:00:07.4: [1106:3057] type 00 class 0x068000 [ 0.057912] pci 0000:00:07.4: quirk: [io 0xe200-0xe27f] claimed by vt82c686 HW-mon [ 0.057920] pci 0000:00:07.4: quirk: [io 0xe800-0xe80f] claimed by vt82c686 SMB [ 0.058190] pci 0000:00:07.5: [1106:3058] type 00 class 0x040100 [ 0.058211] pci 0000:00:07.5: reg 0x10: [io 0xb800-0xb8ff] [ 0.058224] pci 0000:00:07.5: reg 0x14: [io 0xb400-0xb403] [ 0.058237] pci 0000:00:07.5: reg 0x18: [io 0xb000-0xb003] [ 0.058555] pci 0000:00:0e.0: [10ec:8139] type 00 class 0x020000 [ 0.058576] pci 0000:00:0e.0: reg 0x10: [io 0xa400-0xa4ff] [ 0.058590] pci 0000:00:0e.0: reg 0x14: [mem 0xee800000-0xee8000ff] [ 0.058631] pci 0000:00:0e.0: reg 0x30: [mem 0x00000000-0x00007fff pref] [ 0.058671] pci 0000:00:0e.0: supports D1 D2 [ 0.058677] pci 0000:00:0e.0: PME# supported from D1 D2 D3hot D3cold [ 0.059066] pci 0000:01:00.0: [5333:8a26] type 00 class 0x030000 [ 0.059088] pci 0000:01:00.0: reg 0x10: [mem 0xef000000-0xef07ffff] [ 0.059101] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff pref] [ 0.059140] pci 0000:01:00.0: reg 0x30: [mem 0xefff0000-0xefffffff pref] [ 0.059187] pci 0000:01:00.0: supports D1 D2 [ 0.059361] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.059372] pci 0000:00:01.0: bridge window [mem 0xef000000-0xefdfffff] [ 0.059381] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref] [ 0.059394] pci_bus 0000:00: on NUMA node 0 [ 0.062505] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.062519] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.062522] vgaarb: loaded [ 0.062526] vgaarb: bridge control possible 0000:01:00.0 [ 0.062863] SCSI subsystem initialized [ 0.063130] libata version 3.00 loaded. [ 0.063166] ACPI: bus type USB registered [ 0.063311] usbcore: registered new interface driver usbfs [ 0.063363] usbcore: registered new interface driver hub [ 0.063430] usbcore: registered new device driver usb [ 0.063583] PCI: Using ACPI for IRQ routing [ 0.063597] PCI: pci_cache_line_size set to 32 bytes [ 0.063658] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.063666] e820: reserve RAM buffer [mem 0x06ffc000-0x07ffffff] [ 0.065228] clocksource: Switched to clocksource pit [ 0.089545] pnp: PnP ACPI init [ 0.090193] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.090206] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.090213] system 00:00: [mem 0x00100000-0x06ffffff] could not be reserved [ 0.090221] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved [ 0.090228] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.090247] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.090961] system 00:01: [io 0x03f0-0x03f1] has been reserved [ 0.090972] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.090988] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.091223] system 00:02: [io 0xe400-0xe47f] has been reserved [ 0.091232] system 00:02: [io 0xe800-0xe80f] has been reserved [ 0.091239] system 00:02: [io 0xe200-0xe27f] has been reserved [ 0.091249] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.091507] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[8]=0x110000 active = 1 [ 0.091628] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.092009] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[6]=0x11005c active = 1 [ 0.092019] pnp 00:04: [dma 2] [ 0.092052] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[6]=0x11105c active = 0 [ 0.092162] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.092939] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11005c active = 1 [ 0.092947] pnp 00:05: [dma 3] [ 0.092992] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1105c active = 0 [ 0.092997] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11105c active = 0 [ 0.093019] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1205c active = 0 [ 0.093023] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11205c active = 0 [ 0.093044] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1305c active = 0 [ 0.093049] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11305c active = 0 [ 0.093167] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.093653] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11005c active = 1 [ 0.093691] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11105c active = 0 [ 0.093705] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1105c active = 0 [ 0.093719] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11205c active = 0 [ 0.093732] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1205c active = 0 [ 0.093745] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1305c active = 0 [ 0.093750] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11305c active = 0 [ 0.093754] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1405c active = 0 [ 0.093758] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11405c active = 0 [ 0.093763] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x105c active = 0 [ 0.093767] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x10105c active = 0 [ 0.093927] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.094485] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11305c active = 1 [ 0.094521] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11405c active = 0 [ 0.094535] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11405c active = 0 [ 0.094548] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11505c active = 0 [ 0.094561] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11505c active = 0 [ 0.094574] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11605c active = 0 [ 0.094579] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11605c active = 0 [ 0.094583] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1505c active = 0 [ 0.094587] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11505c active = 0 [ 0.094592] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x205c active = 0 [ 0.094596] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x10205c active = 0 [ 0.094735] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.095186] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[1]=0x1100000 active = 1 [ 0.095309] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.095458] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x20205c active = 1 [ 0.095560] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.095767] pnp: PnP ACPI: found 10 devices [ 0.095783] PnPBIOS: Disabled [ 0.138561] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.138631] clocksource: Switched to clocksource acpi_pm [ 0.138719] pci 0000:00:0e.0: BAR 6: assigned [mem 0x08000000-0x08007fff pref] [ 0.138733] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.138746] pci 0000:00:01.0: bridge window [mem 0xef000000-0xefdfffff] [ 0.138809] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref] [ 0.138825] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.138831] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.138839] pci_bus 0000:01: resource 1 [mem 0xef000000-0xefdfffff] [ 0.138845] pci_bus 0000:01: resource 2 [mem 0xeff00000-0xf7ffffff pref] [ 0.138987] NET: Registered protocol family 2 [ 0.139741] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.139775] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.139823] TCP: Hash tables configured (established 1024 bind 1024) [ 0.139978] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.140121] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.140394] NET: Registered protocol family 1 [ 0.140472] pci 0000:00:00.0: Applying VIA southbridge workaround [ 0.140485] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.140500] pci 0000:00:07.0: Disabling VIA external APIC routing [ 0.140936] acpi_irq_get_penalty:512 adding SCI penalty: 16777216 [ 0.140942] penalty[15] = 0x10005c [ 0.140944] penalty[14] = 0x10005c [ 0.140947] penalty[12] = 0x20205c [ 0.140950] penalty[11] = 0x5c [ 0.140953] penalty[10] = 0x205c [ 0.140957] acpi_irq_get_penalty:512 adding SCI penalty: 16777216 [ 0.140960] penalty[9] = 0x100005c [ 0.140962] penalty[7] = 0x11505c [ 0.140966] penalty[6] = 0x11105c [ 0.140969] penalty[5] = 0x1505c [ 0.140971] penalty[4] = 0x11605c [ 0.140974] penalty[3] = 0x11605c [ 0.140978] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off [ 0.141058] acpi_irq_get_penalty:512 adding SCI penalty: 16777216 [ 0.141068] pci 0000:00:07.2: PCI INT D: no GSI [ 0.141312] acpi_irq_get_penalty:512 adding SCI penalty: 16777216 [ 0.141316] penalty[15] = 0x10005c [ 0.141319] penalty[14] = 0x10005c [ 0.141321] penalty[12] = 0x20205c [ 0.141324] penalty[11] = 0x5c [ 0.141327] penalty[10] = 0x205c [ 0.141330] acpi_irq_get_penalty:512 adding SCI penalty: 16777216 [ 0.141333] penalty[9] = 0x100005c [ 0.141336] penalty[7] = 0x11505c [ 0.141338] penalty[6] = 0x11105c [ 0.141341] penalty[5] = 0x1505c [ 0.141344] penalty[4] = 0x11605c [ 0.141348] penalty[3] = 0x11605c [ 0.141351] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off [ 0.141409] acpi_irq_get_penalty:512 adding SCI penalty: 16777216 [ 0.141415] pci 0000:00:07.3: PCI INT D: no GSI [ 0.141478] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.141483] PCI: CLS 32 bytes, default 32 [ 0.143494] futex hash table entries: 256 (order: 1, 8192 bytes) [ 0.145297] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.159183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.159199] io scheduler noop registered [ 0.159202] io scheduler deadline registered [ 0.159355] io scheduler cfq registered (default) [ 0.160660] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.160679] ACPI: Power Button [PWRB] [ 0.160964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.160970] ACPI: Power Button [PWRF] [ 0.161146] tsc: Marking TSC unstable due to TSC halts in idle [ 0.161338] Warning: Processor Platform Limit event detected, but not handled. [ 0.161341] Consider compiling CPUfreq support into your kernel. [ 0.162248] isapnp: Scanning for PnP cards... [ 0.517039] isapnp: No Plug & Play device found [ 0.517342] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.538160] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.559014] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.560699] Non-volatile memory driver v1.3 [ 0.560710] Linux agpgart interface v0.103 [ 0.560832] [drm] Initialized drm 1.1.0 20060810 [ 0.571352] loop: module loaded [ 0.571762] pata_via 0000:00:07.1: version 0.3.4 [ 0.574838] scsi host0: pata_via [ 0.575344] scsi host1: pata_via [ 0.575585] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd800 irq 14 [ 0.575594] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd808 irq 15 [ 0.575826] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 0.575835] 8139cp 0000:00:0e.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 0.575919] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 0.577052] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 0.577062] PCI: setting IRQ 10 as level-triggered [ 0.578035] 8139too 0000:00:0e.0 eth0: RealTek RTL8139 at 0x0001a400, 00:40:95:08:18:34, IRQ 10 [ 0.578127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.578131] ehci-pci: EHCI PCI platform driver [ 0.578206] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.578248] ohci-pci: OHCI PCI platform driver [ 0.578299] uhci_hcd: USB Universal Host Controller Interface driver [ 0.578691] acpi_irq_get_penalty:512 adding SCI penalty: 16777216 [ 0.578697] penalty[15] = 0x10005c [ 0.578700] penalty[14] = 0x10005c [ 0.578703] penalty[12] = 0x20205c [ 0.578705] penalty[11] = 0x5c [ 0.578708] penalty[10] = 0x205c [ 0.578712] acpi_irq_get_penalty:512 adding SCI penalty: 16777216 [ 0.578715] penalty[9] = 0x100005c [ 0.578718] penalty[7] = 0x11505c [ 0.578720] penalty[6] = 0x11105c [ 0.578723] penalty[5] = 0x1505c [ 0.578725] penalty[4] = 0x11605c [ 0.578728] penalty[3] = 0x11605c [ 0.578732] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off [ 0.578808] acpi_irq_get_penalty:512 adding SCI penalty: 16777216 [ 0.578816] uhci_hcd 0000:00:07.2: PCI INT D: no GSI [ 0.578860] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 0.578909] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 0.578984] uhci_hcd 0000:00:07.2: irq 9, io base 0x0000d400 [ 0.580387] hub 1-0:1.0: USB hub found [ 0.580465] hub 1-0:1.0: 2 ports detected [ 0.581316] acpi_irq_get_penalty:512 adding SCI penalty: 16777216 [ 0.581326] penalty[15] = 0x10005c [ 0.581329] penalty[14] = 0x10005c [ 0.581332] penalty[12] = 0x20205c [ 0.581334] penalty[11] = 0x5c [ 0.581337] penalty[10] = 0x205c [ 0.581341] acpi_irq_get_penalty:512 adding SCI penalty: 16777216 [ 0.581344] penalty[9] = 0x100005c [ 0.581346] penalty[7] = 0x11505c [ 0.581349] penalty[6] = 0x11105c [ 0.581352] penalty[5] = 0x1505c [ 0.581354] penalty[4] = 0x11605c [ 0.581357] penalty[3] = 0x11605c [ 0.581361] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off [ 0.581438] acpi_irq_get_penalty:512 adding SCI penalty: 16777216 [ 0.581446] uhci_hcd 0000:00:07.3: PCI INT D: no GSI [ 0.581486] uhci_hcd 0000:00:07.3: UHCI Host Controller [ 0.581516] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 [ 0.581586] uhci_hcd 0000:00:07.3: irq 9, io base 0x0000d000 [ 0.582600] hub 2-0:1.0: USB hub found [ 0.582638] hub 2-0:1.0: 2 ports detected [ 0.583338] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.583973] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.584010] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.584986] mousedev: PS/2 mouse device common for all mice [ 0.585896] rtc_cmos 00:03: RTC can wake from S4 [ 0.586419] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.586512] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram [ 0.587333] NET: Registered protocol family 17 [ 0.587494] Using IPI No-Shortcut mode [ 0.588475] registered taskstats version 1 [ 0.589475] rtc_cmos 00:03: setting system clock to 2016-09-28 08:21:05 UTC (1475050865) [ 0.589623] PM: Hibernation image not present or could not be loaded. [ 0.616362] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.738820] ata1.00: ATA-4: ST33210A, 3.02, max UDMA/33 [ 0.738831] ata1.00: 6346368 sectors, multi 16: LBA [ 0.743732] ata1.00: configured for UDMA/33 [ 0.744539] scsi 0:0:0:0: Direct-Access ATA ST33210A 3.02 PQ: 0 ANSI: 5 [ 0.745531] sd 0:0:0:0: [sda] 6346368 512-byte logical blocks: (3.25 GB/3.03 GiB) [ 0.745740] sd 0:0:0:0: [sda] Write Protect is off [ 0.745749] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.745835] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.772855] sda: sda1 sda2 < sda5 > [ 0.774617] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.078722] random: fast init done [ 1.152069] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xc5c9f0f1ca, max_idle_ns: 440795218091 ns [ 2.211907] input: PS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input4 [ 2.234159] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 2.271764] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.271839] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 2.274668] Freeing unused kernel memory: 524K (c15c1000 - c1644000) [ 2.274995] Write protecting the kernel text: 3920k [ 2.275086] Write protecting the kernel read-only data: 1528k [ 4.398129] udevd (114): /proc/114/oom_adj is deprecated, please use /proc/114/oom_score_adj instead. [ 5.637243] random: crng init done [ 6.630603] Adding 112416k swap on /dev/sda5. Priority:-1 extents:1 across:112416k [ 6.653208] EXT4-fs (sda1): re-mounted. Opts: (null) [ 7.122483] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 9.045160] 8139too 0000:00:0e.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 No IRQ problems when I move the ethernet card to another PCI slot: [ 0.000000] Linux version 4.8.0-rc8+ (zary@gsql) (gcc version 4.7.2 (Debian 4.7.2-5) ) #100 SMP Wed Sep 28 10:19:26 CEST 2016 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000006ffbfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000006ffc000-0x0000000006ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000006fff000-0x0000000006ffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: System Manufacturer System Name/A7VL133, BIOS ASUS A7VL133-VM ACPI BIOS Revision 1008 06/10/2002 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x6ffc max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FFC000000 write-back [ 0.000000] 1 base 004000000 mask FFE000000 write-back [ 0.000000] 2 base 006000000 mask FFF000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 base 0F8000000 mask FFC000000 write-combining [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] BRK [0x016b7000, 0x016b7fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6DA0 000014 (v00 ASUS ) [ 0.000000] ACPI: RSDT 0x0000000006FFC000 00002C (v01 ASUS A7VL133 30303031 MSFT 31313031) [ 0.000000] ACPI: FACP 0x0000000006FFC080 000074 (v01 ASUS A7VL133 30303031 MSFT 31313031) [ 0.000000] ACPI: DSDT 0x0000000006FFC100 0027F0 (v01 ASUS A7VL133 00001000 MSFT 0100000B) [ 0.000000] ACPI: FACS 0x0000000006FFF000 000040 [ 0.000000] ACPI: BOOT 0x0000000006FFC040 000028 (v01 ASUS A7VL133 30303031 MSFT 31313031) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 111MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 06ffc000 [ 0.000000] low ram: 0 - 06ffc000 [ 0.000000] BRK [0x016b8000, 0x016b8fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x0000000006ffbfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000006ffbfff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000006ffbfff] [ 0.000000] On node 0 totalpages: 28570 [ 0.000000] free_area_init_node: node 0, pgdat c15b1840, node_mem_map c6f1c020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 192 pages used for memmap [ 0.000000] Normal zone: 24572 pages, LIFO batch:3 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xe408 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x07000000-0xfffeffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 19 pages/cpu @c6f06000 s47980 r0 d29844 u77824 [ 0.000000] pcpu-alloc: s47980 r0 d29844 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28346 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=/dev/sda1 ro quiet [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 106224K/114280K available (3918K kernel code, 436K rwdata, 1520K rodata, 524K init, 412K bss, 8056K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xc77fc000 - 0xff7fe000 ( 896 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc6ffc000 ( 111 MB) [ 0.000000] .init : 0xc15c1000 - 0xc1644000 ( 524 kB) [ 0.000000] .data : 0xc13d3cc1 - 0xc15bf2e0 (1965 kB) [ 0.000000] .text : 0xc1000000 - 0xc13d3cc1 (3919 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:2304 nr_irqs:32 16 [ 0.000000] CPU 0 irqstacks, hard=c681c000 soft=c681e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 857.704 MHz processor [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 1715.40 BogoMIPS (lpj=3430816) [ 0.004022] pid_max: default: 32768 minimum: 301 [ 0.004071] ACPI: Core revision 20160422 [ 0.010224] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.010240] [ 0.010249] ACPI: setting ELCR to 0200 (from 0c20) [ 0.010344] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.010350] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.011572] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.011582] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.017658] Freeing SMP alternatives memory: 16K (c1644000 - c1648000) [ 0.018159] smpboot: Max logical packages: 1 [ 0.018167] smpboot: weird, boot CPU (#0) not listed by the BIOS [ 0.018170] smpboot: SMP motherboard not detected [ 0.018172] smpboot: SMP disabled [ 0.018178] smpboot: Local APIC not detected. Using dummy APIC emulation. [ 0.018184] Performance Events: [ 0.018192] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.018195] no hardware sampling interrupt available. [ 0.018201] AMD PMU driver. [ 0.018210] ... version: 0 [ 0.018213] ... bit width: 48 [ 0.018215] ... generic registers: 4 [ 0.018218] ... value mask: 0000ffffffffffff [ 0.018221] ... max period: 00007fffffffffff [ 0.018224] ... fixed-purpose events: 0 [ 0.018227] ... event mask: 000000000000000f [ 0.019460] x86: Booted up 1 node, 1 CPUs [ 0.019474] smpboot: Total of 1 processors activated (1715.40 BogoMIPS) [ 0.020170] devtmpfs: initialized [ 0.021311] PM: Registering ACPI NVS region [mem 0x06fff000-0x06ffffff] (4096 bytes) [ 0.021593] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.022112] NET: Registered protocol family 16 [ 0.022794] cpuidle: using governor ladder [ 0.022802] cpuidle: using governor menu [ 0.022914] Simple Boot Flag at 0x3a set to 0x1 [ 0.022940] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns [ 0.022963] ACPI: bus type PCI registered [ 0.029946] PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1 [ 0.029952] PCI: Using configuration type 1 for base access [ 0.036035] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.036762] ACPI: Added _OSI(Module Device) [ 0.036768] ACPI: Added _OSI(Processor Device) [ 0.036772] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.036776] ACPI: Added _OSI(Processor Aggregator Device) [ 0.040978] ACPI: Interpreter enabled [ 0.041065] ACPI: (supports S0 S1 S4 S5) [ 0.041072] ACPI: Using PIC for interrupt routing [ 0.041182] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.054351] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.054571] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.054775] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.054972] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.055186] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.055207] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [ 0.055228] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.055244] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.055399] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored) [ 0.055406] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored) [ 0.055412] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored) [ 0.055419] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored) [ 0.055424] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored) [ 0.055431] acpi PNP0A03:00: host bridge window [mem 0x07000000-0xffffffff window] (ignored) [ 0.055435] PCI: root bus 00: using default resources [ 0.055669] PCI host bridge to bus 0000:00 [ 0.055679] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.055685] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.055694] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.055738] pci 0000:00:00.0: [1106:0305] type 00 class 0x060000 [ 0.055763] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] [ 0.056254] pci 0000:00:01.0: [1106:8305] type 01 class 0x060400 [ 0.056324] pci 0000:00:01.0: supports D1 [ 0.056430] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.056648] pci 0000:00:07.0: [1106:0686] type 00 class 0x060100 [ 0.056992] pci 0000:00:07.1: [1106:0571] type 00 class 0x01018a [ 0.057044] pci 0000:00:07.1: reg 0x20: [io 0xd800-0xd80f] [ 0.057069] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.057074] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.057079] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.057085] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.057350] pci 0000:00:07.2: [1106:3038] type 00 class 0x0c0300 [ 0.057398] pci 0000:00:07.2: reg 0x20: [io 0xd400-0xd41f] [ 0.057534] pci 0000:00:07.2: System wakeup disabled by ACPI [ 0.057726] pci 0000:00:07.3: [1106:3038] type 00 class 0x0c0300 [ 0.057772] pci 0000:00:07.3: reg 0x20: [io 0xd000-0xd01f] [ 0.057911] pci 0000:00:07.3: System wakeup disabled by ACPI [ 0.058114] pci 0000:00:07.4: [1106:3057] type 00 class 0x068000 [ 0.058189] pci 0000:00:07.4: quirk: [io 0xe200-0xe27f] claimed by vt82c686 HW-mon [ 0.058198] pci 0000:00:07.4: quirk: [io 0xe800-0xe80f] claimed by vt82c686 SMB [ 0.058459] pci 0000:00:07.5: [1106:3058] type 00 class 0x040100 [ 0.058480] pci 0000:00:07.5: reg 0x10: [io 0xb800-0xb8ff] [ 0.058493] pci 0000:00:07.5: reg 0x14: [io 0xb400-0xb403] [ 0.058506] pci 0000:00:07.5: reg 0x18: [io 0xb000-0xb003] [ 0.058826] pci 0000:00:0f.0: [10ec:8139] type 00 class 0x020000 [ 0.058847] pci 0000:00:0f.0: reg 0x10: [io 0xa400-0xa4ff] [ 0.058860] pci 0000:00:0f.0: reg 0x14: [mem 0xee800000-0xee8000ff] [ 0.058901] pci 0000:00:0f.0: reg 0x30: [mem 0x00000000-0x00007fff pref] [ 0.058940] pci 0000:00:0f.0: supports D1 D2 [ 0.058946] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold [ 0.059325] pci 0000:01:00.0: [5333:8a26] type 00 class 0x030000 [ 0.059346] pci 0000:01:00.0: reg 0x10: [mem 0xef000000-0xef07ffff] [ 0.059359] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff pref] [ 0.059398] pci 0000:01:00.0: reg 0x30: [mem 0xefff0000-0xefffffff pref] [ 0.059445] pci 0000:01:00.0: supports D1 D2 [ 0.059621] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.059632] pci 0000:00:01.0: bridge window [mem 0xef000000-0xefdfffff] [ 0.059642] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref] [ 0.059655] pci_bus 0000:00: on NUMA node 0 [ 0.062726] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.062738] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.062740] vgaarb: loaded [ 0.062744] vgaarb: bridge control possible 0000:01:00.0 [ 0.063093] SCSI subsystem initialized [ 0.063371] libata version 3.00 loaded. [ 0.063409] ACPI: bus type USB registered [ 0.063558] usbcore: registered new interface driver usbfs [ 0.063611] usbcore: registered new interface driver hub [ 0.063680] usbcore: registered new device driver usb [ 0.063831] PCI: Using ACPI for IRQ routing [ 0.063845] PCI: pci_cache_line_size set to 32 bytes [ 0.063909] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.063917] e820: reserve RAM buffer [mem 0x06ffc000-0x07ffffff] [ 0.065500] clocksource: Switched to clocksource pit [ 0.089303] pnp: PnP ACPI init [ 0.089966] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.089980] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.089987] system 00:00: [mem 0x00100000-0x06ffffff] could not be reserved [ 0.089994] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved [ 0.090001] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.090019] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.090752] system 00:01: [io 0x03f0-0x03f1] has been reserved [ 0.090762] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.090779] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.091016] system 00:02: [io 0xe400-0xe47f] has been reserved [ 0.091024] system 00:02: [io 0xe800-0xe80f] has been reserved [ 0.091031] system 00:02: [io 0xe200-0xe27f] has been reserved [ 0.091041] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.091311] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[8]=0x110000 active = 1 [ 0.091433] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.091820] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[6]=0x11005c active = 1 [ 0.091830] pnp 00:04: [dma 2] [ 0.091863] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[6]=0x11105c active = 0 [ 0.091975] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.092749] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11005c active = 1 [ 0.092757] pnp 00:05: [dma 3] [ 0.092802] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1105c active = 0 [ 0.092807] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11105c active = 0 [ 0.092830] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1205c active = 0 [ 0.092835] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11205c active = 0 [ 0.092858] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1305c active = 0 [ 0.092863] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11305c active = 0 [ 0.092985] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.093472] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11005c active = 1 [ 0.093511] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11105c active = 0 [ 0.093526] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1105c active = 0 [ 0.093539] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11205c active = 0 [ 0.093552] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1205c active = 0 [ 0.093565] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1305c active = 0 [ 0.093570] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11305c active = 0 [ 0.093574] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1405c active = 0 [ 0.093579] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11405c active = 0 [ 0.093583] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x105c active = 0 [ 0.093588] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x10105c active = 0 [ 0.093748] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.094311] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11305c active = 1 [ 0.094349] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11405c active = 0 [ 0.094364] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11405c active = 0 [ 0.094377] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11505c active = 0 [ 0.094390] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11505c active = 0 [ 0.094403] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11605c active = 0 [ 0.094408] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11605c active = 0 [ 0.094413] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1505c active = 0 [ 0.094417] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11505c active = 0 [ 0.094422] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x205c active = 0 [ 0.094426] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x10205c active = 0 [ 0.094722] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.095087] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[1]=0x1100000 active = 1 [ 0.095202] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.095351] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x20205c active = 1 [ 0.095456] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.095669] pnp: PnP ACPI: found 10 devices [ 0.095684] PnPBIOS: Disabled [ 0.138327] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.138394] clocksource: Switched to clocksource acpi_pm [ 0.138478] pci 0000:00:0f.0: BAR 6: assigned [mem 0x08000000-0x08007fff pref] [ 0.138546] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.138559] pci 0000:00:01.0: bridge window [mem 0xef000000-0xefdfffff] [ 0.138567] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref] [ 0.138582] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.138588] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.138595] pci_bus 0000:01: resource 1 [mem 0xef000000-0xefdfffff] [ 0.138601] pci_bus 0000:01: resource 2 [mem 0xeff00000-0xf7ffffff pref] [ 0.138734] NET: Registered protocol family 2 [ 0.139467] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.139499] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.139546] TCP: Hash tables configured (established 1024 bind 1024) [ 0.139695] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.139731] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.139989] NET: Registered protocol family 1 [ 0.140180] pci 0000:00:00.0: Applying VIA southbridge workaround [ 0.140194] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.140209] pci 0000:00:07.0: Disabling VIA external APIC routing [ 0.141111] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [ 0.141120] PCI: setting IRQ 5 as level-triggered [ 0.141821] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.141828] PCI: CLS 32 bytes, default 32 [ 0.143758] futex hash table entries: 256 (order: 1, 8192 bytes) [ 0.145391] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.159112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.159124] io scheduler noop registered [ 0.159127] io scheduler deadline registered [ 0.159279] io scheduler cfq registered (default) [ 0.160529] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.160550] ACPI: Power Button [PWRB] [ 0.160845] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.160853] ACPI: Power Button [PWRF] [ 0.161033] tsc: Marking TSC unstable due to TSC halts in idle [ 0.161222] Warning: Processor Platform Limit event detected, but not handled. [ 0.161224] Consider compiling CPUfreq support into your kernel. [ 0.162142] isapnp: Scanning for PnP cards... [ 0.516729] isapnp: No Plug & Play device found [ 0.517050] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.537878] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.558719] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.560392] Non-volatile memory driver v1.3 [ 0.560403] Linux agpgart interface v0.103 [ 0.560533] [drm] Initialized drm 1.1.0 20060810 [ 0.571177] loop: module loaded [ 0.571577] pata_via 0000:00:07.1: version 0.3.4 [ 0.574532] scsi host0: pata_via [ 0.575050] scsi host1: pata_via [ 0.575294] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd800 irq 14 [ 0.575302] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd808 irq 15 [ 0.575540] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 0.575549] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 0.575633] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 0.576791] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 0.576801] PCI: setting IRQ 10 as level-triggered [ 0.577784] 8139too 0000:00:0f.0 eth0: RealTek RTL8139 at 0x0001a400, 00:40:95:08:18:34, IRQ 10 [ 0.577878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.577884] ehci-pci: EHCI PCI platform driver [ 0.577958] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.578000] ohci-pci: OHCI PCI platform driver [ 0.578050] uhci_hcd: USB Universal Host Controller Interface driver [ 0.578491] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 0.578539] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 0.578624] uhci_hcd 0000:00:07.2: irq 5, io base 0x0000d400 [ 0.580177] hub 1-0:1.0: USB hub found [ 0.580268] hub 1-0:1.0: 2 ports detected [ 0.581151] uhci_hcd 0000:00:07.3: UHCI Host Controller [ 0.581187] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 [ 0.581257] uhci_hcd 0000:00:07.3: irq 5, io base 0x0000d000 [ 0.582242] hub 2-0:1.0: USB hub found [ 0.582278] hub 2-0:1.0: 2 ports detected [ 0.582973] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.583598] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.583636] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.584562] mousedev: PS/2 mouse device common for all mice [ 0.585431] rtc_cmos 00:03: RTC can wake from S4 [ 0.585934] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.586017] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram [ 0.586772] NET: Registered protocol family 17 [ 0.586909] Using IPI No-Shortcut mode [ 0.587561] registered taskstats version 1 [ 0.588603] rtc_cmos 00:03: setting system clock to 2016-09-28 08:28:58 UTC (1475051338) [ 0.588757] PM: Hibernation image not present or could not be loaded. [ 0.617033] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.738836] ata1.00: ATA-4: ST33210A, 3.02, max UDMA/33 [ 0.738849] ata1.00: 6346368 sectors, multi 16: LBA [ 0.743726] ata1.00: configured for UDMA/33 [ 0.744375] scsi 0:0:0:0: Direct-Access ATA ST33210A 3.02 PQ: 0 ANSI: 5 [ 0.745371] sd 0:0:0:0: [sda] 6346368 512-byte logical blocks: (3.25 GB/3.03 GiB) [ 0.745570] sd 0:0:0:0: [sda] Write Protect is off [ 0.745581] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.745667] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.772809] sda: sda1 sda2 < sda5 > [ 0.774448] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.082625] random: fast init done [ 1.152066] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xc5d014da3d, max_idle_ns: 440795221743 ns [ 2.212784] input: PS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input4 [ 2.234158] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 2.271701] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.271774] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 2.274774] Freeing unused kernel memory: 524K (c15c1000 - c1644000) [ 2.275178] Write protecting the kernel text: 3920k [ 2.275270] Write protecting the kernel read-only data: 1528k [ 4.408748] udevd (114): /proc/114/oom_adj is deprecated, please use /proc/114/oom_score_adj instead. [ 5.696720] random: crng init done [ 6.430485] Adding 112416k swap on /dev/sda5. Priority:-1 extents:1 across:112416k [ 6.449765] EXT4-fs (sda1): re-mounted. Opts: (null) [ 6.922465] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 8.856611] 8139too 0000:00:0f.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 -- Ondrej Zary