[ 0.000000] Linux version 4.6.0-0.bpo.1-686 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.6.4-1~bpo8+1 (2016-08-11) [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffcfff] usable [ 0.000000] BIOS-e820: [mem 0x000000001fffd000-0x000000001fffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000001ffff000-0x000000001fffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] Legacy DMI 2.0 present. [ 0.000000] DMI: System Manufacturer System Name/P2B, BIOS ASUS P2B ACPI BIOS Revision 1014 Beta 003 08/01/02 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x1fffd max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-AFFFF uncachable [ 0.000000] B0000-BFFFF write-combining [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-F7FFF uncachable [ 0.000000] F8000-FCFFF write-protect [ 0.000000] FD000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 base 0D8000000 mask FF8000000 write-combining [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] BRK [0x018bc000, 0x018bcfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x1eb88000-0x1fb1efff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F7F90 000014 (v00 ASUS ) [ 0.000000] ACPI: RSDT 0x000000001FFFD000 00002C (v01 ASUS P2B 42302E31 MSFT 31313031) [ 0.000000] ACPI: FACP 0x000000001FFFD080 000074 (v01 ASUS P2B 42302E31 MSFT 31313031) [ 0.000000] ACPI: DSDT 0x000000001FFFD100 001BA8 (v01 ASUS P2B 00001000 MSFT 01000001) [ 0.000000] ACPI: FACS 0x000000001FFFF000 000040 [ 0.000000] ACPI: BOOT 0x000000001FFFD040 000028 (v01 ASUS P2B 42302E31 MSFT 31313031) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fffd000 [ 0.000000] low ram: 0 - 1fffd000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000001fffcfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffcfff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001fffcfff] [ 0.000000] On node 0 totalpages: 130971 [ 0.000000] free_area_init_node: node 0, pgdat c1775600, node_mem_map dfb7d024 [ 0.000000] DMA zone: 36 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1116 pages used for memmap [ 0.000000] Normal zone: 126973 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xe408 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x20000000-0xfffeffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 18 pages/cpu @dfb67000 s41676 r0 d32052 u73728 [ 0.000000] pcpu-alloc: s41676 r0 d32052 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129819 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-0.bpo.1-686 root=UUID=f9e42749-d46b-465f-911a-46fa2db271ad ro quiet drm_kms_helper.edid_firmware=VGA-1:edid-iiyama.bin video=VGA-1:1024x768 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 493792K/523884K available (5424K kernel code, 664K rwdata, 1632K rodata, 688K init, 468K bss, 30092K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xffd36000 - 0xfffff000 (2852 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe07fd000 - 0xff7fe000 ( 496 MB) lowmem : 0xc0000000 - 0xdfffd000 ( 511 MB) .init : 0xc178d000 - 0xc1839000 ( 688 kB) .data : 0xc154c632 - 0xc178c000 (2302 kB) .text : 0xc1000000 - 0xc154c632 (5425 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:2304 nr_irqs:32 16 [ 0.000000] CPU 0 irqstacks, hard=de42c000 soft=de42e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1364.997 MHz processor [ 0.004021] Calibrating delay loop (skipped), value calculated using timer frequency.. 2729.99 BogoMIPS (lpj=5459988) [ 0.004031] pid_max: default: 32768 minimum: 301 [ 0.004082] ACPI: Core revision 20160108 [ 0.009394] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.009411] ACPI: setting ELCR to 0200 (from 0e00) [ 0.009475] Security Framework initialized [ 0.009482] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.009505] AppArmor: AppArmor disabled by boot time parameter [ 0.009534] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.009540] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.010311] Disabling memory control group subsystem [ 0.010425] mce: CPU supports 5 MCE banks [ 0.010464] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2 [ 0.010470] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0 [ 0.017077] Freeing SMP alternatives memory: 24K (c1839000 - c183f000) [ 0.019801] ftrace: allocating 23042 entries in 46 pages [ 0.032388] smpboot: Max logical packages: 1 [ 0.032406] smpboot: weird, boot CPU (#0) not listed by the BIOS [ 0.032409] smpboot: SMP motherboard not detected [ 0.032412] smpboot: SMP disabled [ 0.032416] smpboot: Local APIC not detected. Using dummy APIC emulation. [ 0.032447] Performance Events: [ 0.032456] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.032460] no hardware sampling interrupt available. [ 0.032465] p6 PMU driver. [ 0.032472] ... version: 0 [ 0.032475] ... bit width: 32 [ 0.032478] ... generic registers: 2 [ 0.032481] ... value mask: 00000000ffffffff [ 0.032485] ... max period: 000000007fffffff [ 0.032488] ... fixed-purpose events: 0 [ 0.032491] ... event mask: 0000000000000003 [ 0.037491] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.037559] x86: Booted up 1 node, 1 CPUs [ 0.037565] smpboot: Total of 1 processors activated (2729.99 BogoMIPS) [ 0.037913] devtmpfs: initialized [ 0.038555] PM: Registering ACPI NVS region [mem 0x1ffff000-0x1fffffff] (4096 bytes) [ 0.038754] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.038867] pinctrl core: initialized pinctrl subsystem [ 0.039294] NET: Registered protocol family 16 [ 0.039683] cpuidle: using governor ladder [ 0.039692] cpuidle: using governor menu [ 0.039800] Simple Boot Flag at 0x46 set to 0x1 [ 0.039824] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns [ 0.039935] ACPI: bus type PCI registered [ 0.039943] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.043822] PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1 [ 0.043827] PCI: Using configuration type 1 for base access [ 0.046101] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.046803] ACPI: Added _OSI(Module Device) [ 0.046812] ACPI: Added _OSI(Processor Device) [ 0.046816] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.046820] ACPI: Added _OSI(Processor Aggregator Device) [ 0.048956] ACPI: Interpreter enabled [ 0.049019] ACPI: (supports S0 S1 S4 S5) [ 0.049024] ACPI: Using PIC for interrupt routing [ 0.049072] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.056938] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.057135] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.057321] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.057506] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.057681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.057697] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.057711] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.057722] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.057847] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored) [ 0.057853] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored) [ 0.057859] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored) [ 0.057865] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored) [ 0.057870] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored) [ 0.057875] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfffdffff window] (ignored) [ 0.057879] PCI: root bus 00: using default resources [ 0.058084] PCI host bridge to bus 0000:00 [ 0.058092] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.058098] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.058105] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.058125] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000 [ 0.058143] pci 0000:00:00.0: reg 0x10: [mem 0xe4000000-0xe7ffffff pref] [ 0.058328] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400 [ 0.058468] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100 [ 0.058658] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180 [ 0.058702] pci 0000:00:04.1: reg 0x20: [io 0xb800-0xb80f] [ 0.058725] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.058731] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.058736] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.058741] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.058864] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300 [ 0.058908] pci 0000:00:04.2: reg 0x20: [io 0xb400-0xb41f] [ 0.058988] pci 0000:00:04.2: System wakeup disabled by ACPI [ 0.059093] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000 [ 0.059100] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources [ 0.059173] pci 0000:00:04.3: can't claim BAR 13 [io 0xe400-0xe43f]: address conflict with ACPI CPU throttle [io 0xe410-0xe415] [ 0.059181] pci 0000:00:04.3: quirk: [io 0xe800-0xe80f] claimed by PIIX4 SMB [ 0.059189] pci 0000:00:04.3: PIIX4 devres B PIO at 0290-0297 [ 0.059330] pci 0000:00:09.0: [10b7:9001] type 00 class 0x020000 [ 0.059346] pci 0000:00:09.0: reg 0x10: [io 0xb000-0xb03f] [ 0.059387] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.059512] pci 0000:00:0a.0: [10cd:1300] type 00 class 0x010000 [ 0.059528] pci 0000:00:0a.0: reg 0x10: [io 0xa800-0xa8ff] [ 0.059540] pci 0000:00:0a.0: reg 0x14: [mem 0xd6000000-0xd60000ff] [ 0.059574] pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.059697] pci 0000:00:0b.0: [109e:0350] type 00 class 0x040000 [ 0.059713] pci 0000:00:0b.0: reg 0x10: [mem 0xd7000000-0xd7000fff pref] [ 0.059950] pci 0000:01:00.0: [1002:514d] type 00 class 0x030000 [ 0.059968] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref] [ 0.059979] pci 0000:01:00.0: reg 0x14: [io 0xd800-0xd8ff] [ 0.060028] pci 0000:01:00.0: reg 0x18: [mem 0xd6800000-0xd680ffff] [ 0.060055] pci 0000:01:00.0: reg 0x30: [mem 0xd7fe0000-0xd7ffffff pref] [ 0.060090] pci 0000:01:00.0: supports D1 D2 [ 0.060205] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.060213] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.060219] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff] [ 0.060226] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref] [ 0.060236] pci_bus 0000:00: on NUMA node 0 [ 0.063561] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.063570] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.063573] vgaarb: loaded [ 0.063577] vgaarb: bridge control possible 0000:01:00.0 [ 0.063874] PCI: Using ACPI for IRQ routing [ 0.063883] PCI: pci_cache_line_size set to 32 bytes [ 0.063925] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.063931] e820: reserve RAM buffer [mem 0x1fffd000-0x1fffffff] [ 0.064609] clocksource: Switched to clocksource pit [ 0.089424] VFS: Disk quotas dquot_6.6.0 [ 0.089496] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.089898] pnp: PnP ACPI init [ 0.090294] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.090304] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.090310] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved [ 0.090317] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved [ 0.090330] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.090945] system 00:01: [io 0xe400-0xe43f] could not be reserved [ 0.090953] system 00:01: [io 0xe800-0xe80f] has been reserved [ 0.090959] system 00:01: [io 0x0294-0x0297] has been reserved [ 0.090965] system 00:01: [io 0x03f0-0x03f1] has been reserved [ 0.090971] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.090979] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.091077] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.091649] pnp 00:03: [dma 2] [ 0.091740] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.092667] pnp 00:04: [dma 3] [ 0.092777] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.093465] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.094271] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.094811] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.094832] pnp: PnP ACPI: found 8 devices [ 0.094855] PnPBIOS: Disabled by ACPI PNP [ 0.134355] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.134407] clocksource: Switched to clocksource acpi_pm [ 0.134450] pci 0000:00:04.3: BAR 13: [io size 0x0040] has bogus alignment [ 0.134471] pci 0000:00:09.0: BAR 6: assigned [mem 0x20000000-0x2000ffff pref] [ 0.134479] pci 0000:00:0a.0: BAR 6: assigned [mem 0x20010000-0x2001ffff pref] [ 0.134488] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.134495] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.134504] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff] [ 0.134510] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref] [ 0.134521] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.134527] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.134532] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.134537] pci_bus 0000:01: resource 1 [mem 0xd6800000-0xd6ffffff] [ 0.134543] pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xe3ffffff pref] [ 0.134647] NET: Registered protocol family 2 [ 0.135127] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.135176] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.135259] TCP: Hash tables configured (established 4096 bind 4096) [ 0.135335] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.135361] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.135642] NET: Registered protocol family 1 [ 0.135696] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.136474] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 0.136482] PCI: setting IRQ 9 as level-triggered [ 0.136637] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.136643] PCI: CLS 32 bytes, default 32 [ 0.136834] Unpacking initramfs... [ 1.039778] Freeing initrd memory: 15964K (deb88000 - dfb1f000) [ 1.041185] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.041271] audit: initializing netlink subsys (disabled) [ 1.041327] audit: type=2000 audit(1475088988.038:1): initialized [ 1.041958] Initialise system trusted keyring [ 1.042261] workingset: timestamp_bits=12 max_order=17 bucket_order=5 [ 1.042320] zbud: loaded [ 1.453856] Key type asymmetric registered [ 1.453869] Asymmetric key parser 'x509' registered [ 1.453955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.454069] io scheduler noop registered [ 1.454077] io scheduler deadline registered [ 1.454099] io scheduler cfq registered (default) [ 1.454352] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.454372] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.454418] intel_idle: does not run on family 6 model 11 [ 1.454473] GHES: HEST is not enabled! [ 1.454531] isapnp: Scanning for PnP cards... [ 1.577454] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8 [ 1.577461] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8 [ 1.577467] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8 [ 1.577570] pnp 01:01.02: added ioport region 0xe20-0xe20 to set 0 [ 1.577576] pnp 01:01.02: added ioport region 0xa20-0xa20 to set 0 [ 1.577582] pnp 01:01.02: added ioport region 0xe20-0xe80 to set 1 [ 1.577587] pnp 01:01.02: added ioport region 0xa20-0xa80 to set 1 [ 1.577655] 01:01: card 'Creative SB AWE64 PnP' [ 1.577660] isapnp: 1 Plug & Play card detected total [ 1.577814] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.598381] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.619069] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.639574] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 1.660079] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A [ 1.660447] Linux agpgart interface v0.103 [ 1.660643] agpgart-intel 0000:00:00.0: Intel 440BX Chipset [ 1.663978] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe4000000 [ 1.664424] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.667651] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.667669] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.668121] mousedev: PS/2 mouse device common for all mice [ 1.668261] rtc_cmos 00:02: RTC can wake from S4 [ 1.668454] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.668483] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 1.668565] ledtrig-cpu: registered to indicate activity on CPUs [ 1.669487] NET: Registered protocol family 10 [ 1.670100] mip6: Mobile IPv6 [ 1.670116] NET: Registered protocol family 17 [ 1.670130] mpls_gso: MPLS GSO support [ 1.670586] microcode: CPU0 sig=0x6b1, pf=0x10, revision=0x1c [ 1.670679] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.670708] Using IPI No-Shortcut mode [ 1.671074] registered taskstats version 1 [ 1.671109] Loading compiled-in X.509 certificates [ 1.676507] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) [ 1.678863] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 1.678930] zswap: loaded using pool lzo/zbud [ 1.679512] rtc_cmos 00:02: setting system clock to 2016-09-28 18:56:28 UTC (1475088988) [ 1.679644] PM: Hibernation image not present or could not be loaded. [ 1.682207] Freeing unused kernel memory: 688K (c178d000 - c1839000) [ 1.682324] Write protecting the kernel text: 5428k [ 1.682389] Write protecting the kernel read-only data: 1636k [ 1.697898] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.720514] systemd-udevd[68]: starting version 215 [ 1.721588] random: systemd-udevd urandom read with 6 bits of entropy available [ 1.786059] floppy: module verification failed: signature and/or required key missing - tainting kernel [ 1.807536] 3c59x: Donald Becker and others. [ 1.807569] 0000:00:09.0: 3Com PCI 3c900 Boomerang 10Mbps Combo at 0001b000. [ 1.835912] SCSI subsystem initialized [ 1.839927] ACPI: bus type USB registered [ 1.848968] usbcore: registered new interface driver usbfs [ 1.849038] usbcore: registered new interface driver hub [ 1.849106] usbcore: registered new device driver usb [ 1.850782] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.851947] uhci_hcd: USB Universal Host Controller Interface driver [ 1.868152] Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M [ 1.884954] libata version 3.00 loaded. [ 1.888185] FDC 0 is a post-1991 82077 [ 1.915191] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 [ 5.191651] tsc: Refined TSC clocksource calibration: 1364.999 MHz [ 5.191666] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13acf81e477, max_idle_ns: 440795209386 ns [ 5.237040] advansys 0000:00:0a.0: firmware: direct-loading firmware advansys/mcode.bin [ 5.239578] scsi host0: AdvanSys SCSI 3.5: PCI Ultra: IO 0xA800-0xA80F, IRQ 0x9 [ 5.240493] uhci_hcd 0000:00:04.2: UHCI Host Controller [ 5.240522] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 [ 5.240537] uhci_hcd 0000:00:04.2: detected 2 ports [ 5.240570] uhci_hcd 0000:00:04.2: irq 9, io base 0x0000b400 [ 5.240841] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.240847] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.240852] usb usb1: Product: UHCI Host Controller [ 5.240857] usb usb1: Manufacturer: Linux 4.6.0-0.bpo.1-686 uhci_hcd [ 5.240862] usb usb1: SerialNumber: 0000:00:04.2 [ 5.241476] hub 1-0:1.0: USB hub found [ 5.241605] hub 1-0:1.0: 2 ports detected [ 5.241930] ata_piix 0000:00:04.1: version 2.13 [ 5.246895] scsi host1: ata_piix [ 5.247422] scsi host2: ata_piix [ 5.247592] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14 [ 5.247598] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15 [ 5.292062] blk_update_request: I/O error, dev fd0, sector 0 [ 5.292112] floppy: error -5 while reading block 0 [ 5.336074] blk_update_request: I/O error, dev fd1, sector 0 [ 5.336123] floppy: error -5 while reading block 0 [ 5.407512] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-M1212, 1R22, max UDMA/33 [ 5.407530] ata2.01: ATAPI: ATAPI COMBO48XMAX, VER 1.50, max UDMA/100 [ 5.407642] ata1.00: ATA-7: SAMSUNG SP1213N, TL100-24, max UDMA/100 [ 5.407648] ata1.00: 234493056 sectors, multi 16: LBA48 [ 5.410333] ata1.00: configured for UDMA/33 [ 5.412383] ata2.00: configured for UDMA/33 [ 5.417014] ata2.01: configured for UDMA/33 [ 5.633723] psmouse serio1: hgpk: ID: 10 00 64 [ 6.188125] clocksource: Switched to clocksource tsc [ 6.715330] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP1213N 0-24 PQ: 0 ANSI: 5 [ 6.718103] scsi 2:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1212 1R22 PQ: 0 ANSI: 5 [ 6.726655] scsi 2:0:1:0: CD-ROM ATAPI COMBO48XMAX 1.50 PQ: 0 ANSI: 5 [ 6.742284] sd 1:0:0:0: [sda] 234493056 512-byte logical blocks: (120 GB/112 GiB) [ 6.742490] sd 1:0:0:0: [sda] Write Protect is off [ 6.742497] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.742551] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.750462] input: ImPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input2 [ 6.763212] sr 2:0:0:0: [sr0] scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray [ 6.763226] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.763740] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 6.772980] sr 2:0:1:0: [sr1] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 6.773472] sr 2:0:1:0: Attached scsi CD-ROM sr1 [ 6.775211] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 6.775317] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 6.775409] sr 2:0:1:0: Attached scsi generic sg2 type 5 [ 6.782512] sda: sda1 sda2 sda3 [ 6.783453] sd 1:0:0:0: [sda] Attached SCSI disk [ 7.135083] PM: Starting manual resume from disk [ 7.135103] PM: Hibernation image partition 8:2 present [ 7.135107] PM: Looking for hibernation image. [ 7.135659] PM: Image not found (code -22) [ 7.135666] PM: Hibernation image not present or could not be loaded. [ 7.532688] random: nonblocking pool is initialized [ 7.553907] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem [ 7.591627] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 10.355875] systemd-udevd[328]: starting version 215 [ 11.619994] media: Linux media interface: v0.10 [ 11.685887] parport_pc 00:04: reported by Plug and Play ACPI [ 11.686032] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 11.690402] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.701721] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 11.701738] ACPI: Power Button [PWRB] [ 11.701904] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 11.701910] ACPI: Power Button [PWRF] [ 11.780807] parport1: PC-style at 0x278 [PCSPP,TRISTATE] [ 11.780838] parport1: irq 0 detected [ 11.838897] piix4_smbus 0000:00:04.3: SMBus Host Controller at 0xe800, revision 0 [ 11.850093] tsc: Marking TSC unstable due to TSC halts in idle [ 11.855564] clocksource: Switched to clocksource acpi_pm [ 11.876508] Linux video capture interface: v2.00 [ 11.916287] blk_update_request: I/O error, dev fd0, sector 0 [ 11.916338] floppy: error -5 while reading block 0 [ 11.960429] blk_update_request: I/O error, dev fd1, sector 0 [ 11.960479] floppy: error -5 while reading block 0 [ 12.008383] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 12.104140] [drm] Initialized drm 1.1.0 20060810 [ 12.234841] bttv: driver version 0.9.19 loaded [ 12.234855] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 12.234858] bttv: Host bridge needs ETBF enabled [ 12.234939] bttv: Bt8xx card found (0) [ 12.235679] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 12.235686] PCI: setting IRQ 10 as level-triggered [ 12.235709] bttv: 0: Bt848 (rev 18) at 0000:00:0b.0, irq: 10, latency: 32, mmio: 0xd7000000 [ 12.239358] bttv: 0: using: Bt848 Capture 14MHz [card=163,insmod option] [ 12.239391] bttv: 0: enabling ETBF (430FX/VP3 compatibility) [ 12.239611] bttv: 0: tuner absent [ 12.239671] bttv: 0: Setting PLL: 14318181 => 35468950 (needs up to 100ms) [ 12.268124] bttv: PLL set ok [ 12.268366] bttv: 0: registered device video0 [ 12.268460] bttv: 0: registered device vbi0 [ 12.546460] ppdev: user-space parallel port driver [ 13.025157] [drm] radeon kernel modesetting enabled. [ 13.026125] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 13.026132] PCI: setting IRQ 11 as level-triggered [ 13.027255] [drm] initializing kernel modesetting (R200 0x1002:0x514D 0x148C:0x2054 0x00). [ 13.027286] [drm] register mmio base: 0xD6800000 [ 13.027289] [drm] register mmio size: 65536 [ 13.028148] agpgart-intel 0000:00:00.0: AGP 1.0 bridge [ 13.028167] agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode [ 13.028188] radeon 0000:01:00.0: putting AGP V2 device into 2x mode [ 13.028196] radeon 0000:01:00.0: GTT: 64M 0xE4000000 - 0xE7FFFFFF [ 13.028207] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (64M used) [ 13.028284] [drm] Detected VRAM RAM=128M, BAR=128M [ 13.028288] [drm] RAM width 128bits DDR [ 13.028450] [TTM] Zone kernel: Available graphics memory: 255234 kiB [ 13.028455] [TTM] Initializing pool allocator [ 13.028534] [drm] radeon: 64M of VRAM memory ready [ 13.028539] [drm] radeon: 64M of GTT memory ready. [ 13.029879] radeon 0000:01:00.0: WB disabled [ 13.029898] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000e4000000 and cpu addr 0xe081c000 [ 13.029905] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 13.029908] [drm] Driver supports precise vblank timestamp query. [ 13.029934] [drm] radeon: irq initialized. [ 13.029977] [drm] Loading R200 Microcode [ 13.176476] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R200_cp.bin [ 13.176803] [drm] radeon: ring at 0x00000000E4001000 [ 13.176832] [drm] ring test succeeded in 1 usecs [ 13.177086] [drm] ib test succeeded in 0 usecs [ 13.178410] [drm] Radeon Display Connectors [ 13.178420] [drm] Connector 0: [ 13.178423] [drm] VGA-1 [ 13.178428] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 13.178431] [drm] Encoders: [ 13.178434] [drm] CRT1: INTERNAL_DAC1 [ 13.178438] [drm] Connector 1: [ 13.178440] [drm] DVI-D-1 [ 13.178443] [drm] HPD1 [ 13.178448] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 13.178451] [drm] Encoders: [ 13.178454] [drm] DFP1: INTERNAL_TMDS1 [ 13.215232] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin [ 13.215929] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1" [ 13.248105] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 244 [ 13.248149] Raw EDID: [ 13.248185] 00 ff ff ff ff ff ff 00 26 cd 48 17 51 ac 31 01 [ 13.248220] 0e 0b 01 01 0e 20 18 94 c8 00 b8 a0 57 49 9b 26 [ 13.248254] 10 48 4c 3f ef 80 31 4a 49 4f a9 40 81 8f 61 59 [ 13.248288] 01 01 01 01 01 01 00 00 00 fe 00 00 00 00 00 00 [ 13.248322] 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 00 00 [ 13.248356] 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 [ 13.248390] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe [ 13.248423] 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e1 [ 13.277207] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 244 [ 13.277254] Raw EDID: [ 13.277289] 00 ff ff ff ff ff ff 00 26 cd 48 17 51 ac 31 01 [ 13.277325] 0e 0b 01 01 0e 20 18 94 c8 00 b8 a0 57 49 9b 26 [ 13.277361] 10 48 4c 3f ef 80 31 4a 49 4f a9 40 81 8f 61 59 [ 13.277398] 01 01 01 01 01 01 00 00 00 fe 00 00 00 00 00 00 [ 13.277433] 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 00 00 [ 13.277470] 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 [ 13.277505] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe [ 13.277541] 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e1 [ 13.307210] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 244 [ 13.307264] Raw EDID: [ 13.307301] 00 ff ff ff ff ff ff 00 26 cd 48 17 51 ac 31 01 [ 13.307337] 0e 0b 01 01 0e 20 18 94 c8 00 b8 a0 57 49 9b 26 [ 13.307373] 10 48 4c 3f ef 80 31 4a 49 4f a9 40 81 8f 61 59 [ 13.307408] 01 01 01 01 01 01 00 00 00 fe 00 00 00 00 00 00 [ 13.307445] 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 00 00 [ 13.307480] 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 [ 13.307516] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe [ 13.307552] 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e1 [ 13.354770] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 244 [ 13.354825] Raw EDID: [ 13.354862] 00 ff ff ff ff ff ff 00 26 cd 48 17 51 ac 31 01 [ 13.354899] 0e 0b 01 01 0e 20 18 94 c8 00 b8 a0 57 49 9b 26 [ 13.354935] 10 48 4c 3f ef 80 31 4a 49 4f a9 40 81 8f 61 59 [ 13.354970] 01 01 01 01 01 01 00 00 00 fe 00 00 00 00 00 00 [ 13.355006] 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 00 00 [ 13.355042] 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 [ 13.355078] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe [ 13.355114] 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e1 [ 13.355155] radeon 0000:01:00.0: DVI-D-1: EDID block 0 invalid. [ 13.355573] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [ 13.542079] [drm] fb mappable at 0xD8040000 [ 13.542089] [drm] vram apper at 0xD8000000 [ 13.542092] [drm] size 3145728 [ 13.542096] [drm] fb depth is 24 [ 13.542099] [drm] pitch is 4096 [ 13.542743] fbcon: radeondrmfb (fb0) is primary device [ 13.666095] Console: switching to colour frame buffer device 128x48 [ 13.683804] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 13.683825] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0 [ 13.923232] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k FS [ 14.215756] EXT4-fs (sda3): re-mounted. Opts: (null) [ 15.695493] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 16.495658] device-mapper: uevent: version 1.0.3 [ 16.497041] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 16.799373] lp0: using parport0 (interrupt-driven). [ 16.800840] lp1: using parport1 (polling). [ 16.889228] loop: module loaded [ 17.022545] w83781d: Found a W83781D chip at 0x290 [ 17.597067] sbawe 01:01.00: [irq 5] [ 17.597083] sbawe 01:01.00: [dma 1] [ 17.597089] sbawe 01:01.00: [dma 5] [ 17.597103] sbawe 01:01.00: [io 0x0220-0x022f] [ 17.597111] sbawe 01:01.00: [io 0x0330-0x0331] [ 17.597120] sbawe 01:01.00: [io 0x0388-0x038b] [ 17.599438] sbawe 01:01.00: activated [ 17.599448] sbawe 01:01.02: [io 0x0620-0x0623] [ 17.599456] sbawe 01:01.02: [io 0x0a20-0x0a23] [ 17.599464] sbawe 01:01.02: [io 0x0e20-0x0e23] [ 17.601710] sbawe 01:01.02: activated [ 17.652094] EMU8000 [0x620]: 512 KiB on-board DRAM detected [ 19.180711] fuse init (API version 7.24) [ 21.756729] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 21.858427] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 22.867383] eth0: setting half-duplex. [ 23.717991] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin [ 23.718526] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1" [ 23.847833] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [ 33.505269] /dev/vmmon[1902]: Module vmmon: registered with major=10 minor=165 [ 33.505297] /dev/vmmon[1902]: Module vmmon: initialized [ 33.774009] /dev/vmci[1912]: VMCI: Driver initialized. [ 33.775258] /dev/vmci[1912]: Module vmci: registered with major=10 minor=58 [ 33.775270] /dev/vmci[1912]: Module vmci: initialized [ 34.861891] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin [ 34.862513] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1" [ 34.986158] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [ 35.021149] /dev/vmnet: open called by PID 1968 (vmnet-bridge) [ 35.021173] /dev/vmnet: hub 0 does not exist, allocating memory. [ 35.021229] /dev/vmnet: port on hub 0 successfully opened [ 35.021261] bridge-eth0: up [ 35.021269] bridge-eth0: attached [ 35.190680] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin [ 35.191284] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1" [ 35.346853] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [ 36.489789] /dev/vmnet: open called by PID 2015 (vmnet-dhcpd) [ 36.489815] /dev/vmnet: hub 1 does not exist, allocating memory. [ 36.489865] /dev/vmnet: port on hub 1 successfully opened [ 36.693868] /dev/vmnet: open called by PID 2017 (vmnet-netifup) [ 36.693903] /dev/vmnet: port on hub 1 successfully opened [ 36.940293] /dev/vmnet: open called by PID 2019 (vmnet-dhcpd) [ 36.940323] /dev/vmnet: hub 8 does not exist, allocating memory. [ 36.940381] /dev/vmnet: port on hub 8 successfully opened [ 37.188528] /dev/vmnet: open called by PID 2028 (vmnet-natd) [ 37.188565] /dev/vmnet: port on hub 8 successfully opened [ 37.353293] /dev/vmnet: open called by PID 2030 (vmnet-netifup) [ 37.353333] /dev/vmnet: port on hub 8 successfully opened [ 41.486843] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin [ 41.487454] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1" [ 41.606640] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [ 41.728136] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin [ 41.728793] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1" [ 41.848582] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [ 41.968521] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin [ 41.969129] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1" [ 42.101880] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [ 50.247288] systemd-logind[2180]: New seat seat0. [ 50.272662] systemd-logind[2180]: Watching system buttons on /dev/input/event3 (Power Button) [ 50.272890] systemd-logind[2180]: Watching system buttons on /dev/input/event2 (Power Button) [ 50.291427] systemd-logind[2180]: Failed to start user service: Unknown unit: user@1000.service [ 50.307693] systemd-logind[2180]: New session c1 of user rainbow. [ 55.626314] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin [ 55.626845] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1" [ 55.747297] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [ 55.867910] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin [ 55.868916] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1" [ 55.987477] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [ 56.107247] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin [ 56.107855] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1" [ 56.226627] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID [ 97.010370] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 97.077658] JFS: nTxBlock = 3988, nTxLock = 31904 [ 97.191115] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 97.384418] QNX4 filesystem 0.2.3 registered. [ 97.556056] raid6: mmxx1 gen() 1302 MB/s [ 97.624061] raid6: mmxx2 gen() 1561 MB/s [ 97.692074] raid6: sse1x1 gen() 1152 MB/s [ 97.760064] raid6: sse1x2 gen() 1522 MB/s [ 97.828165] raid6: int32x1 gen() 420 MB/s [ 97.896057] raid6: int32x1 xor() 208 MB/s [ 97.964139] raid6: int32x2 gen() 539 MB/s [ 98.032076] raid6: int32x2 xor() 297 MB/s [ 98.100153] raid6: int32x4 gen() 466 MB/s [ 98.168082] raid6: int32x4 xor() 291 MB/s [ 98.236134] raid6: int32x8 gen() 428 MB/s [ 98.304042] raid6: int32x8 xor() 263 MB/s [ 98.304046] raid6: using algorithm mmxx2 gen() 1561 MB/s [ 98.304050] raid6: using intx1 recovery algorithm [ 99.244489] xor: measuring software checksum speed [ 99.284036] pIII_sse : 3069.000 MB/sec [ 99.324034] prefetch64-sse: 3294.000 MB/sec [ 99.324039] xor: using function: prefetch64-sse (3294.000 MB/sec) [ 99.576155] Btrfs loaded