* [PATCH v8 00/13] x86: multiboot2 protocol support
@ 2016-09-28 22:51 Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 01/13] x86: add " Daniel Kiper
` (12 more replies)
0 siblings, 13 replies; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
Hi,
I am sending eight version of multiboot2 protocol support for
legacy BIOS and EFI platforms. This patch series release contains
fixes for all known issues.
The final goal is xen.efi binary file which could be loaded by EFI
loader, multiboot (v1) protocol (only on legacy BIOS platforms) and
multiboot2 protocol. This way we will have:
- smaller Xen code base,
- one code base for xen.gz and xen.efi,
- one build method for xen.gz and xen.efi;
xen.efi will be extracted from xen(-syms)
file using objcopy or special custom tool,
- xen.efi build will not so strongly depend
on a given GCC and binutils version.
Here is short list of changes since v7:
- changed patches: 01, 04, 06, 07, 09, 11, 12.
Julien Grall raised some concerns in regards to EFI boot allocator
implementation on ARM. After some discussion with him and Jan I did
a few changes requested by them. Hence, I am asking especially ARM
guys to review patch #06 and check that everything is OK.
I hope that (at least some) features provided by this patch series
will be included in Xen 4.8 release in one way or another.
If you are not interested in this patch series at all please
drop me a line and I will remove you from distribution list.
Daniel
.gitignore | 5 +-
xen/arch/x86/Makefile | 8 +-
xen/arch/x86/Rules.mk | 3 +
xen/arch/x86/boot/Makefile | 12 +-
xen/arch/x86/boot/build32.mk | 2 +
xen/arch/x86/boot/cmdline.S | 367 --------------------------------------------------------
xen/arch/x86/boot/cmdline.c | 340 ++++++++++++++++++++++++++++++++++++++++++++++++++++
xen/arch/x86/boot/defs.h | 58 +++++++++
xen/arch/x86/boot/edd.S | 3 -
xen/arch/x86/boot/head.S | 538 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------
xen/arch/x86/boot/reloc.c | 151 +++++++++++++++++++++--
xen/arch/x86/boot/trampoline.S | 22 +++-
xen/arch/x86/boot/video.S | 7 --
xen/arch/x86/boot/wakeup.S | 4 +-
xen/arch/x86/boot/x86_64.S | 44 +++----
xen/arch/x86/dmi_scan.c | 4 +-
xen/arch/x86/domain_page.c | 2 +-
xen/arch/x86/efi/Makefile | 12 +-
xen/arch/x86/efi/efi-boot.h | 65 +++++++---
xen/arch/x86/efi/stub.c | 48 +++++++-
xen/arch/x86/mpparse.c | 4 +-
xen/arch/x86/setup.c | 36 +++---
xen/arch/x86/shutdown.c | 5 +-
xen/arch/x86/time.c | 2 +-
xen/arch/x86/x86_64/asm-offsets.c | 15 +++
xen/arch/x86/xen.lds.S | 10 +-
xen/common/efi/boot.c | 83 ++++++++++++-
xen/common/efi/runtime.c | 23 +++-
xen/common/version.c | 2 +-
xen/drivers/acpi/osl.c | 2 +-
xen/include/asm-x86/page.h | 2 +-
xen/include/xen/efi.h | 9 +-
xen/include/xen/multiboot2.h | 182 ++++++++++++++++++++++++++++
33 files changed, 1531 insertions(+), 539 deletions(-)
Daniel Kiper (13):
x86: add multiboot2 protocol support
efi: create efi_enabled()
x86: allow EFI reboot method neither on EFI platforms...
x86: properly calculate xen ELF end of image address
efi: build xen.gz with EFI code
efi: create new early memory allocator
x86: add multiboot2 protocol support for EFI platforms
x86/boot: implement early command line parser in C
x86: change default load address from 1 MiB to 2 MiB
x86/setup: use XEN_IMG_OFFSET instead of...
x86: make Xen early boot code relocatable
x86/boot: rename sym_phys() to sym_offs()
x86: add multiboot2 protocol support for relocatable images
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v8 01/13] x86: add multiboot2 protocol support
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
@ 2016-09-28 22:51 ` Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 02/13] efi: create efi_enabled() Daniel Kiper
` (11 subsequent siblings)
12 siblings, 0 replies; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
Add multiboot2 protocol support. Alter min memory limit handling as we
now may not find it from either multiboot (v1) or multiboot2.
This way we are laying the foundation for EFI + GRUB2 + Xen development.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
v8 - suggestions/fixes:
- use sizeof(<var>/<expr>) instead of sizeof(<type>)
if it is possible
(suggested by Jan Beulich).
v7 - suggestions/fixes:
- rename mbi_mbi/mbi2_mbi to mbi_reloc/mbi2_reloc respectively
(suggested by Jan Beulich),
- initialize mbi_out->flags using "|=" instead of "="
(suggested by Jan Beulich),
- use sizeof(*mmap_dst) instead of sizeof(memory_map_t)
if it makes sense
(suggested by Jan Beulich).
v6 - suggestions/fixes:
- properly index multiboot2_tag_mmap_t.entries[]
(suggested by Jan Beulich),
- do not index mbi_out_mods[] beyond its end
(suggested by Andrew Cooper),
- reduce number of casts
(suggested by Andrew Cooper and Jan Beulich),
- add braces to increase code readability
(suggested by Andrew Cooper).
v5 - suggestions/fixes:
- check multiboot2_tag_mmap_t.entry_size before
multiboot2_tag_mmap_t.entries[] use
(suggested by Jan Beulich),
- properly index multiboot2_tag_mmap_t.entries[]
(suggested by Jan Beulich),
- use "type name[]" instad of "type name[0]"
in xen/include/xen/multiboot2.h
(suggested by Jan Beulich),
- remove unneeded comment
(suggested by Jan Beulich).
v4 - suggestions/fixes:
- avoid assembly usage in xen/arch/x86/boot/reloc.c,
- fix boundary check issue and optimize
for() loops in mbi2_mbi(),
- move to stdcall calling convention,
- remove unneeded typeof() from ALIGN_UP() macro
(suggested by Jan Beulich),
- add and use NULL definition in xen/arch/x86/boot/reloc.c
(suggested by Jan Beulich),
- do not read data beyond the end of multiboot2
information in xen/arch/x86/boot/head.S
(suggested by Jan Beulich),
- add :req to some .macro arguments
(suggested by Jan Beulich),
- use cmovcc if possible,
- add .L to multiboot2_header_end label
(suggested by Jan Beulich),
- add .L to multiboot2_proto label
(suggested by Jan Beulich),
- improve label names
(suggested by Jan Beulich).
v3 - suggestions/fixes:
- reorder reloc() arguments
(suggested by Jan Beulich),
- remove .L from multiboot2 header labels
(suggested by Andrew Cooper, Jan Beulich and Konrad Rzeszutek Wilk),
- take into account alignment when skipping multiboot2 fixed part
(suggested by Konrad Rzeszutek Wilk),
- create modules data if modules count != 0
(suggested by Jan Beulich),
- improve macros
(suggested by Jan Beulich),
- reduce number of casts
(suggested by Jan Beulich),
- use const if possible
(suggested by Jan Beulich),
- drop static and __used__ attribute from reloc()
(suggested by Jan Beulich),
- remove isolated/stray __packed attribute from
multiboot2_memory_map_t type definition
(suggested by Jan Beulich),
- reformat xen/include/xen/multiboot2.h
(suggested by Konrad Rzeszutek Wilk),
- improve comments
(suggested by Konrad Rzeszutek Wilk),
- remove hard tabs
(suggested by Jan Beulich and Konrad Rzeszutek Wilk).
v2 - suggestions/fixes:
- generate multiboot2 header using macros
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich),
- simplify assembly in xen/arch/x86/boot/head.S
(suggested by Jan Beulich),
- do not include include/xen/compiler.h
in xen/arch/x86/boot/reloc.c
(suggested by Jan Beulich),
- do not read data beyond the end of multiboot2 information
(suggested by Jan Beulich).
v2 - not fixed yet:
- dynamic dependency generation for xen/arch/x86/boot/reloc.S;
this requires more work; I am not sure that it pays because
potential patch requires more changes than addition of just
multiboot2.h to Makefile
(suggested by Jan Beulich),
- isolated/stray __packed attribute usage for multiboot2_memory_map_t
(suggested by Jan Beulich).
---
xen/arch/x86/boot/Makefile | 3 +-
xen/arch/x86/boot/head.S | 107 ++++++++++++++++++++++-
xen/arch/x86/boot/reloc.c | 148 ++++++++++++++++++++++++++++++--
xen/arch/x86/x86_64/asm-offsets.c | 9 ++
xen/include/xen/multiboot2.h | 169 +++++++++++++++++++++++++++++++++++++
5 files changed, 426 insertions(+), 10 deletions(-)
create mode 100644 xen/include/xen/multiboot2.h
diff --git a/xen/arch/x86/boot/Makefile b/xen/arch/x86/boot/Makefile
index 5fdb5ae..06893d8 100644
--- a/xen/arch/x86/boot/Makefile
+++ b/xen/arch/x86/boot/Makefile
@@ -1,6 +1,7 @@
obj-bin-y += head.o
-RELOC_DEPS = $(BASEDIR)/include/asm-x86/config.h $(BASEDIR)/include/xen/multiboot.h
+RELOC_DEPS = $(BASEDIR)/include/asm-x86/config.h $(BASEDIR)/include/xen/multiboot.h \
+ $(BASEDIR)/include/xen/multiboot2.h
head.o: reloc.S
diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index 6f2c668..383ff79 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -1,5 +1,6 @@
#include <xen/config.h>
#include <xen/multiboot.h>
+#include <xen/multiboot2.h>
#include <public/xen.h>
#include <asm/asm_defns.h>
#include <asm/desc.h>
@@ -19,6 +20,28 @@
#define BOOT_PSEUDORM_CS 0x0020
#define BOOT_PSEUDORM_DS 0x0028
+#define MB2_HT(name) (MULTIBOOT2_HEADER_TAG_##name)
+#define MB2_TT(name) (MULTIBOOT2_TAG_TYPE_##name)
+
+ .macro mb2ht_args arg:req, args:vararg
+ .long \arg
+ .ifnb \args
+ mb2ht_args \args
+ .endif
+ .endm
+
+ .macro mb2ht_init type:req, req:req, args:vararg
+ .align MULTIBOOT2_TAG_ALIGN
+.Lmb2ht_init_start\@:
+ .short \type
+ .short \req
+ .long .Lmb2ht_init_end\@ - .Lmb2ht_init_start\@
+ .ifnb \args
+ mb2ht_args \args
+ .endif
+.Lmb2ht_init_end\@:
+ .endm
+
ENTRY(start)
jmp __start
@@ -34,6 +57,42 @@ multiboot1_header_start: /*** MULTIBOOT1 HEADER ****/
.long -(MULTIBOOT_HEADER_MAGIC + MULTIBOOT_HEADER_FLAGS)
multiboot1_header_end:
+/*** MULTIBOOT2 HEADER ****/
+/* Some ideas are taken from grub-2.00/grub-core/tests/boot/kernel-i386.S file. */
+ .align MULTIBOOT2_HEADER_ALIGN
+
+multiboot2_header_start:
+ /* Magic number indicating a Multiboot2 header. */
+ .long MULTIBOOT2_HEADER_MAGIC
+ /* Architecture: i386. */
+ .long MULTIBOOT2_ARCHITECTURE_I386
+ /* Multiboot2 header length. */
+ .long .Lmultiboot2_header_end - multiboot2_header_start
+ /* Multiboot2 header checksum. */
+ .long -(MULTIBOOT2_HEADER_MAGIC + MULTIBOOT2_ARCHITECTURE_I386 + \
+ (.Lmultiboot2_header_end - multiboot2_header_start))
+
+ /* Multiboot2 information request tag. */
+ mb2ht_init MB2_HT(INFORMATION_REQUEST), MB2_HT(REQUIRED), \
+ MB2_TT(BASIC_MEMINFO), MB2_TT(MMAP)
+
+ /* Align modules at page boundry. */
+ mb2ht_init MB2_HT(MODULE_ALIGN), MB2_HT(REQUIRED)
+
+ /* Console flags tag. */
+ mb2ht_init MB2_HT(CONSOLE_FLAGS), MB2_HT(OPTIONAL), \
+ MULTIBOOT2_CONSOLE_FLAGS_EGA_TEXT_SUPPORTED
+
+ /* Framebuffer tag. */
+ mb2ht_init MB2_HT(FRAMEBUFFER), MB2_HT(OPTIONAL), \
+ 0, /* Number of the columns - no preference. */ \
+ 0, /* Number of the lines - no preference. */ \
+ 0 /* Number of bits per pixel - no preference. */
+
+ /* Multiboot2 header end tag. */
+ mb2ht_init MB2_HT(END), MB2_HT(REQUIRED)
+.Lmultiboot2_header_end:
+
.section .init.rodata, "a", @progbits
.align 4
@@ -82,10 +141,52 @@ __start:
mov %ecx,%es
mov %ecx,%ss
- /* Check for Multiboot bootloader */
+ /* Bootloaders may set multiboot{1,2}.mem_lower to a nonzero value. */
+ xor %edx,%edx
+
+ /* Check for Multiboot2 bootloader. */
+ cmp $MULTIBOOT2_BOOTLOADER_MAGIC,%eax
+ je .Lmultiboot2_proto
+
+ /* Check for Multiboot bootloader. */
cmp $MULTIBOOT_BOOTLOADER_MAGIC,%eax
jne not_multiboot
+ /* Get mem_lower from Multiboot information. */
+ testb $MBI_MEMLIMITS,MB_flags(%ebx)
+
+ /* Not available? BDA value will be fine. */
+ cmovnz MB_mem_lower(%ebx),%edx
+ jmp trampoline_setup
+
+.Lmultiboot2_proto:
+ /* Skip Multiboot2 information fixed part. */
+ lea (MB2_fixed_sizeof+MULTIBOOT2_TAG_ALIGN-1)(%ebx),%ecx
+ and $~(MULTIBOOT2_TAG_ALIGN-1),%ecx
+
+0:
+ /* Check Multiboot2 information total size. */
+ mov %ecx,%edi
+ sub %ebx,%edi
+ cmp %edi,MB2_fixed_total_size(%ebx)
+ jbe trampoline_setup
+
+ /* Get mem_lower from Multiboot2 information. */
+ cmpl $MULTIBOOT2_TAG_TYPE_BASIC_MEMINFO,MB2_tag_type(%ecx)
+ cmove MB2_mem_lower(%ecx),%edx
+ je trampoline_setup
+
+ /* Is it the end of Multiboot2 information? */
+ cmpl $MULTIBOOT2_TAG_TYPE_END,MB2_tag_type(%ecx)
+ je trampoline_setup
+
+ /* Go to next Multiboot2 information tag. */
+ add MB2_tag_size(%ecx),%ecx
+ add $(MULTIBOOT2_TAG_ALIGN-1),%ecx
+ and $~(MULTIBOOT2_TAG_ALIGN-1),%ecx
+ jmp 0b
+
+trampoline_setup:
/* Set up trampoline segment 64k below EBDA */
movzwl 0x40e,%ecx /* EBDA segment */
cmp $0xa000,%ecx /* sanity check (high) */
@@ -100,9 +201,6 @@ __start:
* Compare the value in the BDA with the information from the
* multiboot structure (if available) and use the smallest.
*/
- testb $MBI_MEMLIMITS,(%ebx)
- jz 2f /* not available? BDA value will be fine */
- mov MB_mem_lower(%ebx),%edx
cmp $0x100,%edx /* is the multiboot value too small? */
jb 2f /* if so, do not use it */
shl $10-4,%edx
@@ -121,6 +219,7 @@ __start:
mov $sym_phys(cpu0_stack)+1024,%esp
push %ecx /* Boot trampoline address. */
push %ebx /* Multiboot information address. */
+ push %eax /* Multiboot magic. */
call reloc
mov %eax,sym_phys(multiboot_ptr)
diff --git a/xen/arch/x86/boot/reloc.c b/xen/arch/x86/boot/reloc.c
index ea8cb37..b22bf1e 100644
--- a/xen/arch/x86/boot/reloc.c
+++ b/xen/arch/x86/boot/reloc.c
@@ -5,15 +5,18 @@
* and modules. This is most easily done early with paging disabled.
*
* Copyright (c) 2009, Citrix Systems, Inc.
+ * Copyright (c) 2013-2016 Oracle and/or its affiliates. All rights reserved.
*
* Authors:
* Keir Fraser <keir@xen.org>
+ * Daniel Kiper <daniel.kiper@oracle.com>
*/
/*
* This entry point is entered from xen/arch/x86/boot/head.S with:
- * - 0x4(%esp) = MULTIBOOT_INFORMATION_ADDRESS,
- * - 0x8(%esp) = BOOT_TRAMPOLINE_ADDRESS.
+ * - 0x4(%esp) = MULTIBOOT_MAGIC,
+ * - 0x8(%esp) = MULTIBOOT_INFORMATION_ADDRESS,
+ * - 0xc(%esp) = BOOT_TRAMPOLINE_ADDRESS.
*/
asm (
" .text \n"
@@ -23,7 +26,12 @@ asm (
);
typedef unsigned int u32;
+typedef unsigned long long u64;
+
#include "../../../include/xen/multiboot.h"
+#include "../../../include/xen/multiboot2.h"
+
+#define NULL ((void *)0)
#define __stdcall __attribute__((__stdcall__))
@@ -32,6 +40,9 @@ typedef unsigned int u32;
#define _p(val) ((void *)(unsigned long)(val))
+#define get_mb2_data(tag, type, member) (((multiboot2_tag_##type##_t *)(tag))->member)
+#define get_mb2_string(tag, type, member) ((u32)get_mb2_data(tag, type, member))
+
static u32 alloc;
static u32 alloc_mem(u32 bytes)
@@ -39,6 +50,12 @@ static u32 alloc_mem(u32 bytes)
return alloc -= ALIGN_UP(bytes, 16);
}
+static void zero_mem(u32 s, u32 bytes)
+{
+ while ( bytes-- )
+ *(char *)s++ = 0;
+}
+
static u32 copy_mem(u32 src, u32 bytes)
{
u32 dst, dst_ret;
@@ -65,13 +82,11 @@ static u32 copy_string(u32 src)
return copy_mem(src, p - src + 1);
}
-multiboot_info_t __stdcall *reloc(u32 mbi_in, u32 trampoline)
+static multiboot_info_t *mbi_reloc(u32 mbi_in)
{
int i;
multiboot_info_t *mbi_out;
- alloc = trampoline;
-
mbi_out = _p(copy_mem(mbi_in, sizeof(*mbi_out)));
if ( mbi_out->flags & MBI_CMDLINE )
@@ -108,3 +123,126 @@ multiboot_info_t __stdcall *reloc(u32 mbi_in, u32 trampoline)
return mbi_out;
}
+
+static multiboot_info_t *mbi2_reloc(u32 mbi_in)
+{
+ const multiboot2_fixed_t *mbi_fix = _p(mbi_in);
+ const multiboot2_memory_map_t *mmap_src;
+ const multiboot2_tag_t *tag;
+ module_t *mbi_out_mods = NULL;
+ memory_map_t *mmap_dst;
+ multiboot_info_t *mbi_out;
+ u32 ptr;
+ unsigned int i, mod_idx = 0;
+
+ ptr = alloc_mem(sizeof(*mbi_out));
+ mbi_out = _p(ptr);
+ zero_mem(ptr, sizeof(*mbi_out));
+
+ /* Skip Multiboot2 information fixed part. */
+ ptr = ALIGN_UP(mbi_in + sizeof(*mbi_fix), MULTIBOOT2_TAG_ALIGN);
+
+ /* Get the number of modules. */
+ for ( tag = _p(ptr); (u32)tag - mbi_in < mbi_fix->total_size;
+ tag = _p(ALIGN_UP((u32)tag + tag->size, MULTIBOOT2_TAG_ALIGN)) )
+ {
+ if ( tag->type == MULTIBOOT2_TAG_TYPE_MODULE )
+ ++mbi_out->mods_count;
+ else if ( tag->type == MULTIBOOT2_TAG_TYPE_END )
+ break;
+ }
+
+ if ( mbi_out->mods_count )
+ {
+ mbi_out->flags |= MBI_MODULES;
+ mbi_out->mods_addr = alloc_mem(mbi_out->mods_count * sizeof(*mbi_out_mods));
+ mbi_out_mods = _p(mbi_out->mods_addr);
+ }
+
+ /* Skip Multiboot2 information fixed part. */
+ ptr = ALIGN_UP(mbi_in + sizeof(*mbi_fix), MULTIBOOT2_TAG_ALIGN);
+
+ /* Put all needed data into mbi_out. */
+ for ( tag = _p(ptr); (u32)tag - mbi_in < mbi_fix->total_size;
+ tag = _p(ALIGN_UP((u32)tag + tag->size, MULTIBOOT2_TAG_ALIGN)) )
+ switch ( tag->type )
+ {
+ case MULTIBOOT2_TAG_TYPE_BOOT_LOADER_NAME:
+ mbi_out->flags |= MBI_LOADERNAME;
+ ptr = get_mb2_string(tag, string, string);
+ mbi_out->boot_loader_name = copy_string(ptr);
+ break;
+
+ case MULTIBOOT2_TAG_TYPE_CMDLINE:
+ mbi_out->flags |= MBI_CMDLINE;
+ ptr = get_mb2_string(tag, string, string);
+ mbi_out->cmdline = copy_string(ptr);
+ break;
+
+ case MULTIBOOT2_TAG_TYPE_BASIC_MEMINFO:
+ mbi_out->flags |= MBI_MEMLIMITS;
+ mbi_out->mem_lower = get_mb2_data(tag, basic_meminfo, mem_lower);
+ mbi_out->mem_upper = get_mb2_data(tag, basic_meminfo, mem_upper);
+ break;
+
+ case MULTIBOOT2_TAG_TYPE_MMAP:
+ if ( get_mb2_data(tag, mmap, entry_size) < sizeof(*mmap_src) )
+ break;
+
+ mbi_out->flags |= MBI_MEMMAP;
+ mbi_out->mmap_length = get_mb2_data(tag, mmap, size);
+ mbi_out->mmap_length -= sizeof(multiboot2_tag_mmap_t);
+ mbi_out->mmap_length /= get_mb2_data(tag, mmap, entry_size);
+ mbi_out->mmap_length *= sizeof(*mmap_dst);
+
+ mbi_out->mmap_addr = alloc_mem(mbi_out->mmap_length);
+
+ mmap_src = get_mb2_data(tag, mmap, entries);
+ mmap_dst = _p(mbi_out->mmap_addr);
+
+ for ( i = 0; i < mbi_out->mmap_length / sizeof(*mmap_dst); i++ )
+ {
+ /* Init size member properly. */
+ mmap_dst[i].size = sizeof(*mmap_dst);
+ mmap_dst[i].size -= sizeof(mmap_dst[i].size);
+ /* Now copy a given region data. */
+ mmap_dst[i].base_addr_low = (u32)mmap_src->addr;
+ mmap_dst[i].base_addr_high = (u32)(mmap_src->addr >> 32);
+ mmap_dst[i].length_low = (u32)mmap_src->len;
+ mmap_dst[i].length_high = (u32)(mmap_src->len >> 32);
+ mmap_dst[i].type = mmap_src->type;
+ mmap_src = _p(mmap_src) + get_mb2_data(tag, mmap, entry_size);
+ }
+ break;
+
+ case MULTIBOOT2_TAG_TYPE_MODULE:
+ if ( mod_idx >= mbi_out->mods_count )
+ break;
+
+ mbi_out_mods[mod_idx].mod_start = get_mb2_data(tag, module, mod_start);
+ mbi_out_mods[mod_idx].mod_end = get_mb2_data(tag, module, mod_end);
+ ptr = get_mb2_string(tag, module, cmdline);
+ mbi_out_mods[mod_idx].string = copy_string(ptr);
+ mbi_out_mods[mod_idx].reserved = 0;
+ ++mod_idx;
+ break;
+
+ case MULTIBOOT2_TAG_TYPE_END:
+ return mbi_out;
+
+ default:
+ break;
+ }
+
+ return mbi_out;
+}
+
+multiboot_info_t __stdcall *reloc(u32 mb_magic, u32 mbi_in, u32 trampoline)
+{
+ alloc = trampoline;
+
+ if ( mb_magic == MULTIBOOT2_BOOTLOADER_MAGIC )
+ return mbi2_reloc(mbi_in);
+ else
+ return mbi_reloc(mbi_in);
+}
diff --git a/xen/arch/x86/x86_64/asm-offsets.c b/xen/arch/x86/x86_64/asm-offsets.c
index 64905c6..b437a8f 100644
--- a/xen/arch/x86/x86_64/asm-offsets.c
+++ b/xen/arch/x86/x86_64/asm-offsets.c
@@ -13,6 +13,7 @@
#include <asm/fixmap.h>
#include <asm/hardirq.h>
#include <xen/multiboot.h>
+#include <xen/multiboot2.h>
#define DEFINE(_sym, _val) \
asm volatile ("\n.ascii\"==>#define " #_sym " %0 /* " #_val " */<==\"" \
@@ -167,6 +168,14 @@ void __dummy__(void)
OFFSET(MB_flags, multiboot_info_t, flags);
OFFSET(MB_cmdline, multiboot_info_t, cmdline);
OFFSET(MB_mem_lower, multiboot_info_t, mem_lower);
+ BLANK();
+
+ DEFINE(MB2_fixed_sizeof, sizeof(multiboot2_fixed_t));
+ OFFSET(MB2_fixed_total_size, multiboot2_fixed_t, total_size);
+ OFFSET(MB2_tag_type, multiboot2_tag_t, type);
+ OFFSET(MB2_tag_size, multiboot2_tag_t, size);
+ OFFSET(MB2_mem_lower, multiboot2_tag_basic_meminfo_t, mem_lower);
+ BLANK();
OFFSET(DOMAIN_vm_assist, struct domain, vm_assist);
}
diff --git a/xen/include/xen/multiboot2.h b/xen/include/xen/multiboot2.h
new file mode 100644
index 0000000..8dd5800
--- /dev/null
+++ b/xen/include/xen/multiboot2.h
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 1999,2003,2007,2008,2009,2010 Free Software Foundation, Inc.
+ *
+ * multiboot2.h - Multiboot 2 header file.
+ *
+ * Based on grub-2.00/include/multiboot2.h file.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL ANY
+ * DEVELOPER OR DISTRIBUTOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
+ * IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __MULTIBOOT2_H__
+#define __MULTIBOOT2_H__
+
+/* The magic field should contain this. */
+#define MULTIBOOT2_HEADER_MAGIC 0xe85250d6
+
+/* This should be in %eax on x86 architecture. */
+#define MULTIBOOT2_BOOTLOADER_MAGIC 0x36d76289
+
+/* How many bytes from the start of the file we search for the header. */
+#define MULTIBOOT2_SEARCH 32768
+
+/* Multiboot 2 header alignment. */
+#define MULTIBOOT2_HEADER_ALIGN 8
+
+/* Alignment of multiboot 2 modules. */
+#define MULTIBOOT2_MOD_ALIGN 0x00001000
+
+/* Alignment of the multiboot 2 info structure. */
+#define MULTIBOOT2_INFO_ALIGN 0x00000008
+
+/* Multiboot 2 architectures. */
+#define MULTIBOOT2_ARCHITECTURE_I386 0
+#define MULTIBOOT2_ARCHITECTURE_MIPS32 4
+
+/* Header tag types. */
+#define MULTIBOOT2_HEADER_TAG_END 0
+#define MULTIBOOT2_HEADER_TAG_INFORMATION_REQUEST 1
+#define MULTIBOOT2_HEADER_TAG_ADDRESS 2
+#define MULTIBOOT2_HEADER_TAG_ENTRY_ADDRESS 3
+#define MULTIBOOT2_HEADER_TAG_CONSOLE_FLAGS 4
+#define MULTIBOOT2_HEADER_TAG_FRAMEBUFFER 5
+#define MULTIBOOT2_HEADER_TAG_MODULE_ALIGN 6
+#define MULTIBOOT2_HEADER_TAG_EFI_BS 7
+#define MULTIBOOT2_HEADER_TAG_ENTRY_ADDRESS_EFI32 8
+#define MULTIBOOT2_HEADER_TAG_ENTRY_ADDRESS_EFI64 9
+
+/* Header tag flags. */
+#define MULTIBOOT2_HEADER_TAG_REQUIRED 0
+#define MULTIBOOT2_HEADER_TAG_OPTIONAL 1
+
+/* Header console tag console_flags. */
+#define MULTIBOOT2_CONSOLE_FLAGS_CONSOLE_REQUIRED 1
+#define MULTIBOOT2_CONSOLE_FLAGS_EGA_TEXT_SUPPORTED 2
+
+/* Flags set in the 'flags' member of the multiboot header. */
+#define MULTIBOOT2_TAG_TYPE_END 0
+#define MULTIBOOT2_TAG_TYPE_CMDLINE 1
+#define MULTIBOOT2_TAG_TYPE_BOOT_LOADER_NAME 2
+#define MULTIBOOT2_TAG_TYPE_MODULE 3
+#define MULTIBOOT2_TAG_TYPE_BASIC_MEMINFO 4
+#define MULTIBOOT2_TAG_TYPE_BOOTDEV 5
+#define MULTIBOOT2_TAG_TYPE_MMAP 6
+#define MULTIBOOT2_TAG_TYPE_VBE 7
+#define MULTIBOOT2_TAG_TYPE_FRAMEBUFFER 8
+#define MULTIBOOT2_TAG_TYPE_ELF_SECTIONS 9
+#define MULTIBOOT2_TAG_TYPE_APM 10
+#define MULTIBOOT2_TAG_TYPE_EFI32 11
+#define MULTIBOOT2_TAG_TYPE_EFI64 12
+#define MULTIBOOT2_TAG_TYPE_SMBIOS 13
+#define MULTIBOOT2_TAG_TYPE_ACPI_OLD 14
+#define MULTIBOOT2_TAG_TYPE_ACPI_NEW 15
+#define MULTIBOOT2_TAG_TYPE_NETWORK 16
+#define MULTIBOOT2_TAG_TYPE_EFI_MMAP 17
+#define MULTIBOOT2_TAG_TYPE_EFI_BS 18
+#define MULTIBOOT2_TAG_TYPE_EFI32_IH 19
+#define MULTIBOOT2_TAG_TYPE_EFI64_IH 20
+
+/* Multiboot 2 tag alignment. */
+#define MULTIBOOT2_TAG_ALIGN 8
+
+/* Memory types. */
+#define MULTIBOOT2_MEMORY_AVAILABLE 1
+#define MULTIBOOT2_MEMORY_RESERVED 2
+#define MULTIBOOT2_MEMORY_ACPI_RECLAIMABLE 3
+#define MULTIBOOT2_MEMORY_NVS 4
+#define MULTIBOOT2_MEMORY_BADRAM 5
+
+/* Framebuffer types. */
+#define MULTIBOOT2_FRAMEBUFFER_TYPE_INDEXED 0
+#define MULTIBOOT2_FRAMEBUFFER_TYPE_RGB 1
+#define MULTIBOOT2_FRAMEBUFFER_TYPE_EGA_TEXT 2
+
+#ifndef __ASSEMBLY__
+typedef struct {
+ u32 total_size;
+ u32 reserved;
+} multiboot2_fixed_t;
+
+typedef struct {
+ u32 type;
+ u32 size;
+} multiboot2_tag_t;
+
+typedef struct {
+ u32 type;
+ u32 size;
+ char string[];
+} multiboot2_tag_string_t;
+
+typedef struct {
+ u32 type;
+ u32 size;
+ u32 mem_lower;
+ u32 mem_upper;
+} multiboot2_tag_basic_meminfo_t;
+
+typedef struct {
+ u64 addr;
+ u64 len;
+ u32 type;
+ u32 zero;
+} multiboot2_memory_map_t;
+
+typedef struct {
+ u32 type;
+ u32 size;
+ u32 entry_size;
+ u32 entry_version;
+ multiboot2_memory_map_t entries[];
+} multiboot2_tag_mmap_t;
+
+typedef struct {
+ u32 type;
+ u32 size;
+ u64 pointer;
+} multiboot2_tag_efi64_t;
+
+typedef struct {
+ u32 type;
+ u32 size;
+ u64 pointer;
+} multiboot2_tag_efi64_ih_t;
+
+typedef struct {
+ u32 type;
+ u32 size;
+ u32 mod_start;
+ u32 mod_end;
+ char cmdline[];
+} multiboot2_tag_module_t;
+#endif /* __ASSEMBLY__ */
+
+#endif /* __MULTIBOOT2_H__ */
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 02/13] efi: create efi_enabled()
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 01/13] x86: add " Daniel Kiper
@ 2016-09-28 22:51 ` Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 03/13] x86: allow EFI reboot method neither on EFI platforms Daniel Kiper
` (10 subsequent siblings)
12 siblings, 0 replies; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
First of all we need to differentiate between legacy BIOS
and EFI platforms during runtime, not during build, because
one image will have legacy and EFI code and can be executed
on both platforms. Additionally, we need more fine grained
knowledge about EFI environment and check for EFI platform
and EFI loader separately to properly support multiboot2
protocol. In general Xen loaded by this protocol uses memory
mappings and loaded modules in similar way to Xen loaded by
multiboot (v1) protocol. Hence, create efi_enabled() which
checks available features in efi_flags. This patch defines
EFI_BOOT, EFI_LOADER and EFI_RS features. EFI_BOOT is equal
to old efi_enabled == 1. EFI_RS ease control on runtime
services usage. EFI_LOADER tells that Xen was loaded
directly from EFI as PE executable.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
v7 - suggestions/fixes:
- remove efi_enabled(EFI_RS) check from mapcache_current_vcpu()
(suggested by Daniel Kiper and Jan Beulich),
- remove BUG() from xen/arch/x86/efi/stub.c:efi_rs_using_pgtables()
(suggested by Daniel Kiper and Jan Beulich).
v6 - suggestions/fixes:
- define efi_enabled() as "bool efi_enabled(unsigned int feature)"
instead of "bool_t efi_enabled(int feature)"
(suggested by Jan Beulich),
- define efi_flags as unsigned int
(suggested by Jan Beulich),
- various minor cleanups and fixes
(suggested by Jan Beulich).
v5 - suggestions/fixes:
- squash three patches into one
(suggested by Jan Beulich),
- introduce all features at once
(suggested by Jan Beulich),
- efi_enabled() returns bool_t
instead of unsigned int
(suggested by Jan Beulich),
- update commit message.
v4 - suggestions/fixes:
- rename EFI_PLATFORM to EFI_BOOT
(suggested by Jan Beulich),
- move EFI_BOOT definition to efi struct definition
(suggested by Jan Beulich),
- remove unneeded efi.flags initialization
(suggested by Jan Beulich),
- use __set_bit() instead of set_bit() if possible
(suggested by Jan Beulich),
- do efi_enabled() cleanup
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich),
- improve commit message.
v3 - suggestions/fixes:
- define efi struct in xen/arch/x86/efi/stub.c
in earlier patch
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich),
- improve commit message
(suggested by Jan Beulich).
---
xen/arch/x86/dmi_scan.c | 4 ++--
xen/arch/x86/domain_page.c | 2 +-
xen/arch/x86/efi/stub.c | 8 ++++----
xen/arch/x86/mpparse.c | 4 ++--
xen/arch/x86/setup.c | 12 +++++++-----
xen/arch/x86/shutdown.c | 2 +-
xen/arch/x86/time.c | 2 +-
xen/common/efi/boot.c | 19 +++++++++++++++----
xen/common/efi/runtime.c | 14 ++++++++------
xen/common/version.c | 2 +-
xen/drivers/acpi/osl.c | 2 +-
xen/include/xen/efi.h | 8 ++++++--
12 files changed, 49 insertions(+), 30 deletions(-)
diff --git a/xen/arch/x86/dmi_scan.c b/xen/arch/x86/dmi_scan.c
index b049e31..8dcb640 100644
--- a/xen/arch/x86/dmi_scan.c
+++ b/xen/arch/x86/dmi_scan.c
@@ -238,7 +238,7 @@ const char *__init dmi_get_table(paddr_t *base, u32 *len)
{
static unsigned int __initdata instance;
- if (efi_enabled) {
+ if (efi_enabled(EFI_BOOT)) {
if (efi_smbios3_size && !(instance & 1)) {
*base = efi_smbios3_address;
*len = efi_smbios3_size;
@@ -696,7 +696,7 @@ static void __init dmi_decode(struct dmi_header *dm)
void __init dmi_scan_machine(void)
{
- if ((!efi_enabled ? dmi_iterate(dmi_decode) :
+ if ((!efi_enabled(EFI_BOOT) ? dmi_iterate(dmi_decode) :
dmi_efi_iterate(dmi_decode)) == 0)
dmi_check_system(dmi_blacklist);
else
diff --git a/xen/arch/x86/domain_page.c b/xen/arch/x86/domain_page.c
index d86f8fe..a58ef8e 100644
--- a/xen/arch/x86/domain_page.c
+++ b/xen/arch/x86/domain_page.c
@@ -36,7 +36,7 @@ static inline struct vcpu *mapcache_current_vcpu(void)
* domain's page tables but current may point at another domain's VCPU.
* Return NULL as though current is not properly set up yet.
*/
- if ( efi_enabled && efi_rs_using_pgtables() )
+ if ( efi_rs_using_pgtables() )
return NULL;
/*
diff --git a/xen/arch/x86/efi/stub.c b/xen/arch/x86/efi/stub.c
index 07c2bd0..4158124 100644
--- a/xen/arch/x86/efi/stub.c
+++ b/xen/arch/x86/efi/stub.c
@@ -4,9 +4,10 @@
#include <xen/lib.h>
#include <asm/page.h>
-#ifndef efi_enabled
-const bool_t efi_enabled = 0;
-#endif
+bool efi_enabled(unsigned int feature)
+{
+ return false;
+}
void __init efi_init_memory(void) { }
@@ -14,7 +15,6 @@ void efi_update_l4_pgtable(unsigned int l4idx, l4_pgentry_t l4e) { }
bool_t efi_rs_using_pgtables(void)
{
- BUG();
return 0;
}
diff --git a/xen/arch/x86/mpparse.c b/xen/arch/x86/mpparse.c
index ef6557c..c3d5bdc 100644
--- a/xen/arch/x86/mpparse.c
+++ b/xen/arch/x86/mpparse.c
@@ -564,7 +564,7 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
static __init void efi_unmap_mpf(void)
{
- if (efi_enabled)
+ if (efi_enabled(EFI_BOOT))
clear_fixmap(FIX_EFI_MPF);
}
@@ -722,7 +722,7 @@ void __init find_smp_config (void)
{
unsigned int address;
- if (efi_enabled) {
+ if (efi_enabled(EFI_BOOT)) {
efi_check_config();
return;
}
diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index 8ae897a..06f3970 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -439,8 +439,8 @@ static void __init parse_video_info(void)
{
struct boot_video_info *bvi = &bootsym(boot_vid_info);
- /* The EFI loader fills vga_console_info directly. */
- if ( efi_enabled )
+ /* vga_console_info is filled directly on EFI platform. */
+ if ( efi_enabled(EFI_BOOT) )
return;
if ( (bvi->orig_video_isVGA == 1) && (bvi->orig_video_mode == 3) )
@@ -726,7 +726,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)
if ( !(mbi->flags & MBI_MODULES) || (mbi->mods_count == 0) )
panic("dom0 kernel not specified. Check bootloader configuration.");
- if ( efi_enabled )
+ if ( efi_enabled(EFI_LOADER) )
{
set_pdx_range(xen_phys_start >> PAGE_SHIFT,
(xen_phys_start + BOOTSTRAP_MAP_BASE) >> PAGE_SHIFT);
@@ -741,6 +741,8 @@ void __init noreturn __start_xen(unsigned long mbi_p)
memmap_type = loader;
}
+ else if ( efi_enabled(EFI_BOOT) )
+ memmap_type = "EFI";
else if ( e820_raw_nr != 0 )
{
memmap_type = "Xen-e820";
@@ -837,7 +839,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)
* we can relocate the dom0 kernel and other multiboot modules. Also, on
* x86/64, we relocate Xen to higher memory.
*/
- for ( i = 0; !efi_enabled && i < mbi->mods_count; i++ )
+ for ( i = 0; !efi_enabled(EFI_LOADER) && i < mbi->mods_count; i++ )
{
if ( mod[i].mod_start & (PAGE_SIZE - 1) )
panic("Bootloader didn't honor module alignment request.");
@@ -1078,7 +1080,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)
if ( !xen_phys_start )
panic("Not enough memory to relocate Xen.");
- reserve_e820_ram(&boot_e820, efi_enabled ? mbi->mem_upper : __pa(&_start),
+ reserve_e820_ram(&boot_e820, efi_enabled(EFI_LOADER) ? mbi->mem_upper : __pa(&_start),
__pa(&_end));
/* Late kexec reservation (dynamic start address). */
diff --git a/xen/arch/x86/shutdown.c b/xen/arch/x86/shutdown.c
index 0e1499d..54c2c79 100644
--- a/xen/arch/x86/shutdown.c
+++ b/xen/arch/x86/shutdown.c
@@ -116,7 +116,7 @@ void machine_halt(void)
static void default_reboot_type(void)
{
if ( reboot_type == BOOT_INVALID )
- reboot_type = efi_enabled ? BOOT_EFI
+ reboot_type = efi_enabled(EFI_RS) ? BOOT_EFI
: acpi_disabled ? BOOT_KBD
: BOOT_ACPI;
}
diff --git a/xen/arch/x86/time.c b/xen/arch/x86/time.c
index dda89d8..15c3657 100644
--- a/xen/arch/x86/time.c
+++ b/xen/arch/x86/time.c
@@ -814,7 +814,7 @@ static unsigned long get_cmos_time(void)
static bool_t __read_mostly cmos_rtc_probe;
boolean_param("cmos-rtc-probe", cmos_rtc_probe);
- if ( efi_enabled )
+ if ( efi_enabled(EFI_RS) )
{
res = efi_get_time();
if ( res )
diff --git a/xen/common/efi/boot.c b/xen/common/efi/boot.c
index 125c9ce..56544dc 100644
--- a/xen/common/efi/boot.c
+++ b/xen/common/efi/boot.c
@@ -934,6 +934,13 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
char *option_str;
bool_t use_cfg_file;
+ __set_bit(EFI_BOOT, &efi_flags);
+ __set_bit(EFI_LOADER, &efi_flags);
+
+#ifndef CONFIG_ARM /* Disabled until runtime services implemented. */
+ __set_bit(EFI_RS, &efi_flags);
+#endif
+
efi_init(ImageHandle, SystemTable);
use_cfg_file = efi_arch_use_config_file(SystemTable);
@@ -1153,7 +1160,6 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
#ifndef CONFIG_ARM /* TODO - runtime service support */
-static bool_t __initdata efi_rs_enable = 1;
static bool_t __initdata efi_map_uc;
static void __init parse_efi_param(char *s)
@@ -1171,7 +1177,12 @@ static void __init parse_efi_param(char *s)
*ss = '\0';
if ( !strcmp(s, "rs") )
- efi_rs_enable = val;
+ {
+ if ( val )
+ __set_bit(EFI_RS, &efi_flags);
+ else
+ __clear_bit(EFI_RS, &efi_flags);
+ }
else if ( !strcmp(s, "attr=uc") )
efi_map_uc = val;
@@ -1254,7 +1265,7 @@ void __init efi_init_memory(void)
desc->PhysicalStart, desc->PhysicalStart + len - 1,
desc->Type, desc->Attribute);
- if ( !efi_rs_enable ||
+ if ( !efi_enabled(EFI_RS) ||
(!(desc->Attribute & EFI_MEMORY_RUNTIME) &&
(!map_bs ||
(desc->Type != EfiBootServicesCode &&
@@ -1328,7 +1339,7 @@ void __init efi_init_memory(void)
}
}
- if ( !efi_rs_enable )
+ if ( !efi_enabled(EFI_RS) )
{
efi_fw_vendor = NULL;
return;
diff --git a/xen/common/efi/runtime.c b/xen/common/efi/runtime.c
index c256814..5f2de80 100644
--- a/xen/common/efi/runtime.c
+++ b/xen/common/efi/runtime.c
@@ -10,12 +10,6 @@ DEFINE_XEN_GUEST_HANDLE(CHAR16);
#ifndef COMPAT
-/*
- * Currently runtime services are not implemented on ARM. To boot Xen with ACPI,
- * set efi_enabled to 1, so that Xen can get the ACPI root pointer from EFI.
- */
-const bool_t efi_enabled = 1;
-
#ifndef CONFIG_ARM
# include <asm/i387.h>
# include <asm/xstate.h>
@@ -43,6 +37,9 @@ UINT64 __read_mostly efi_boot_max_var_store_size;
UINT64 __read_mostly efi_boot_remain_var_store_size;
UINT64 __read_mostly efi_boot_max_var_size;
+/* Bit field representing available EFI features/properties. */
+unsigned int efi_flags;
+
struct efi __read_mostly efi = {
.acpi = EFI_INVALID_TABLE_ADDR,
.acpi20 = EFI_INVALID_TABLE_ADDR,
@@ -53,6 +50,11 @@ struct efi __read_mostly efi = {
const struct efi_pci_rom *__read_mostly efi_pci_roms;
+bool efi_enabled(unsigned int feature)
+{
+ return test_bit(feature, &efi_flags);
+}
+
#ifndef CONFIG_ARM /* TODO - disabled until implemented on ARM */
unsigned long efi_rs_enter(void)
{
diff --git a/xen/common/version.c b/xen/common/version.c
index 0d31e38..223cb52 100644
--- a/xen/common/version.c
+++ b/xen/common/version.c
@@ -160,7 +160,7 @@ static int __init xen_build_init(void)
#ifdef CONFIG_X86
/* Alternatively we may have a CodeView record from an EFI build. */
- if ( rc && efi_enabled )
+ if ( rc && efi_enabled(EFI_LOADER) )
{
const struct pe_external_debug_directory *dir = (const void *)n;
diff --git a/xen/drivers/acpi/osl.c b/xen/drivers/acpi/osl.c
index 9a49029..3616dfd 100644
--- a/xen/drivers/acpi/osl.c
+++ b/xen/drivers/acpi/osl.c
@@ -66,7 +66,7 @@ void __init acpi_os_vprintf(const char *fmt, va_list args)
acpi_physical_address __init acpi_os_get_root_pointer(void)
{
- if (efi_enabled) {
+ if (efi_enabled(EFI_BOOT)) {
if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
return efi.acpi20;
else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
diff --git a/xen/include/xen/efi.h b/xen/include/xen/efi.h
index e74dad1..68c68a8 100644
--- a/xen/include/xen/efi.h
+++ b/xen/include/xen/efi.h
@@ -5,10 +5,13 @@
#include <xen/types.h>
#endif
-extern const bool_t efi_enabled;
-
#define EFI_INVALID_TABLE_ADDR (~0UL)
+extern unsigned int efi_flags;
+#define EFI_BOOT 0 /* Were we booted from EFI? */
+#define EFI_LOADER 1 /* Were we booted directly from EFI loader? */
+#define EFI_RS 2 /* Can we use runtime services? */
+
/* Add fields here only if they need to be referenced from non-EFI code. */
struct efi {
unsigned long mps; /* MPS table */
@@ -28,6 +31,7 @@ union compat_pf_efi_info;
struct xenpf_efi_runtime_call;
struct compat_pf_efi_runtime_call;
+bool efi_enabled(unsigned int feature);
void efi_init_memory(void);
bool_t efi_rs_using_pgtables(void);
unsigned long efi_get_time(void);
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 03/13] x86: allow EFI reboot method neither on EFI platforms...
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 01/13] x86: add " Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 02/13] efi: create efi_enabled() Daniel Kiper
@ 2016-09-28 22:51 ` Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 04/13] x86: properly calculate xen ELF end of image address Daniel Kiper
` (9 subsequent siblings)
12 siblings, 0 replies; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
..nor EFI platforms with runtime services enabled.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
---
v6 - suggestions/fixes:
- move this commit behind "efi: create efi_enabled()" commit
(suggested by Jan Beulich).
v5 - suggestions/fixes:
- fix build error
(suggested by Jan Beulich),
- improve commit message.
---
xen/arch/x86/shutdown.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/xen/arch/x86/shutdown.c b/xen/arch/x86/shutdown.c
index 54c2c79..b429fd0 100644
--- a/xen/arch/x86/shutdown.c
+++ b/xen/arch/x86/shutdown.c
@@ -80,6 +80,9 @@ static void __init set_reboot_type(char *str)
break;
str++;
}
+
+ if ( reboot_type == BOOT_EFI && !efi_enabled(EFI_RS) )
+ reboot_type = BOOT_INVALID;
}
custom_param("reboot", set_reboot_type);
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 04/13] x86: properly calculate xen ELF end of image address
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
` (2 preceding siblings ...)
2016-09-28 22:51 ` [PATCH v8 03/13] x86: allow EFI reboot method neither on EFI platforms Daniel Kiper
@ 2016-09-28 22:51 ` Daniel Kiper
2016-09-29 7:34 ` Jan Beulich
2016-09-28 22:51 ` [PATCH v8 05/13] efi: build xen.gz with EFI code Daniel Kiper
` (8 subsequent siblings)
12 siblings, 1 reply; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
Currently xen ELF end of image address is calculated using first line from
"nm -nr xen/xen-syms" output. However, potentially it may contain symbol
address not related to the end of image in any way. It can happen if a symbol
is introduced with address larger than _end symbol address. Such situation
encountered when I linked xen ELF binary with xen/arch/x86/efi/relocs-dummy.S.
Then first line from "nm -nr xen/xen-syms" contained "ffff82d0c0000000 A ALT_START"
and xen ELF image memory size was silently set to 1023 MiB. This issue happened
because there is no check which symbol address is used to calculate end of
image address. So, let's fix it and take ELF end of image address by reading
_end symbol address from nm output. This way xen ELF image build process is
not prone to changes in order of nm output.
This patch is prereq for "efi: build xen.gz with EFI code" patch which adds,
among others, xen/arch/x86/efi/relocs-dummy.S to xen.gz output.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
---
v8 - suggestions/fixes:
- use spaces instead of tab in indentation
(suggested by Jan Beulich and Konrad Rzeszutek Wilk),
- improve commit message
(suggested by Jan Beulich).
v7 - suggestions/fixes:
- use sed instead of awk
(suggested by Jan Beulich),
- improve commit message
(suggested by Jan Beulich).
---
xen/arch/x86/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/xen/arch/x86/Makefile b/xen/arch/x86/Makefile
index 931917d..8e003ff 100644
--- a/xen/arch/x86/Makefile
+++ b/xen/arch/x86/Makefile
@@ -91,7 +91,7 @@ endif
$(TARGET): $(TARGET)-syms $(efi-y) boot/mkelf32
./boot/mkelf32 $(notes_phdrs) $(TARGET)-syms $(TARGET) 0x100000 \
- `$(NM) -nr $(TARGET)-syms | head -n 1 | sed -e 's/^\([^ ]*\).*/0x\1/'`
+ `$(NM) $(TARGET)-syms | sed -ne 's/^\([^ ]*\) . _end$$/0x\1/p'`
ALL_OBJS := $(BASEDIR)/arch/x86/boot/built_in.o $(BASEDIR)/arch/x86/efi/built_in.o $(ALL_OBJS)
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 05/13] efi: build xen.gz with EFI code
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
` (3 preceding siblings ...)
2016-09-28 22:51 ` [PATCH v8 04/13] x86: properly calculate xen ELF end of image address Daniel Kiper
@ 2016-09-28 22:51 ` Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 06/13] efi: create new early memory allocator Daniel Kiper
` (7 subsequent siblings)
12 siblings, 0 replies; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
Build xen.gz with EFI code. We need this to support multiboot2
protocol on EFI platforms.
If we wish to load non-ELF file using multiboot (v1) or multiboot2 then
it must contain "linear" (or "flat") representation of code and data.
This is requirement of both boot protocols. Currently, PE file contains
many sections which are not "linear" (one after another without any holes)
or even do not have representation in a file (e.g. BSS). From EFI point
of view everything is OK and works. However, this file layout cannot be
properly interpreted by multiboot protocols family. In theory there is
a chance that we could build proper PE file (from multiboot protocols POV)
using current build system. However, it means that xen.efi further diverge
from Xen ELF file (in terms of contents and build method). On the other
hand ELF has all needed properties. So, it means that this is good starting
point for further development. Additionally, I think that this is also good
starting point for further xen.efi code and build optimizations. It looks
that there is a chance that finally we can generate xen.efi directly from
Xen ELF using just simple objcopy or other tool. This way we will have one
Xen binary which can be loaded by three boot protocols: EFI native loader,
multiboot (v1) and multiboot2.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
---
v6 - suggestions/fixes:
- improve efi_enabled() checks in efi_runtime_call()
(suggested by Jan Beulich).
v5 - suggestions/fixes:
- properly calculate efi symbol address in
xen/arch/x86/xen.lds.S (I hope that this
change does not invalidate Jan's ACK).
v4 - suggestions/fixes:
- functions should return -ENOSYS instead
of -EOPNOTSUPP if EFI runtime services
are not available
(suggested by Jan Beulich),
- remove stale bits from xen/arch/x86/Makefile
(suggested by Jan Beulich).
v3 - suggestions/fixes:
- check for EFI platform in EFI code
(suggested by Jan Beulich),
- fix Makefiles
(suggested by Jan Beulich),
- improve commit message
(suggested by Jan Beulich).
v2 - suggestions/fixes:
- build EFI code only if it is supported in a given build environment
(suggested by Jan Beulich).
---
xen/arch/x86/Makefile | 2 +-
xen/arch/x86/efi/Makefile | 12 ++++--------
xen/arch/x86/xen.lds.S | 4 ++--
xen/common/efi/boot.c | 3 +++
xen/common/efi/runtime.c | 9 +++++++++
5 files changed, 19 insertions(+), 11 deletions(-)
diff --git a/xen/arch/x86/Makefile b/xen/arch/x86/Makefile
index 8e003ff..3972dd5 100644
--- a/xen/arch/x86/Makefile
+++ b/xen/arch/x86/Makefile
@@ -219,6 +219,6 @@ efi/mkreloc: efi/mkreloc.c
clean::
rm -f asm-offsets.s *.lds boot/*.o boot/*~ boot/core boot/mkelf32
rm -f $(BASEDIR)/.xen-syms.[0-9]* boot/.*.d
- rm -f $(BASEDIR)/.xen.efi.[0-9]* efi/*.o efi/.*.d efi/*.efi efi/disabled efi/mkreloc
+ rm -f $(BASEDIR)/.xen.efi.[0-9]* efi/*.efi efi/disabled efi/mkreloc
rm -f boot/reloc.S boot/reloc.lnk boot/reloc.bin
rm -f note.o
diff --git a/xen/arch/x86/efi/Makefile b/xen/arch/x86/efi/Makefile
index ad3fdf7..442f3fc 100644
--- a/xen/arch/x86/efi/Makefile
+++ b/xen/arch/x86/efi/Makefile
@@ -1,18 +1,14 @@
CFLAGS += -fshort-wchar
-obj-y += stub.o
-
-create = test -e $(1) || touch -t 199901010000 $(1)
-
efi := y$(shell rm -f disabled)
efi := $(if $(efi),$(shell $(CC) $(filter-out $(CFLAGS-y) .%.d,$(CFLAGS)) -c check.c 2>disabled && echo y))
efi := $(if $(efi),$(shell $(LD) -mi386pep --subsystem=10 -o check.efi check.o 2>disabled && echo y))
-efi := $(if $(efi),$(shell rm disabled)y,$(shell $(call create,boot.init.o); $(call create,runtime.o)))
-
-extra-$(efi) += boot.init.o relocs-dummy.o runtime.o compat.o buildid.o
+efi := $(if $(efi),$(shell rm disabled)y)
%.o: %.ihex
$(OBJCOPY) -I ihex -O binary $< $@
-stub.o: $(extra-y)
+obj-y := stub.o
+obj-$(efi) := boot.init.o compat.o relocs-dummy.o runtime.o
+extra-$(efi) += buildid.o
nogcov-$(efi) += stub.o
diff --git a/xen/arch/x86/xen.lds.S b/xen/arch/x86/xen.lds.S
index 7676de9..b0b1c9b 100644
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -270,10 +270,10 @@ SECTIONS
.pad : {
. = ALIGN(MB(16));
} :text
-#else
- efi = .;
#endif
+ efi = DEFINED(efi) ? efi : .;
+
/* Sections to be discarded */
/DISCARD/ : {
*(.exit.text)
diff --git a/xen/common/efi/boot.c b/xen/common/efi/boot.c
index 56544dc..1ef5d0b 100644
--- a/xen/common/efi/boot.c
+++ b/xen/common/efi/boot.c
@@ -1251,6 +1251,9 @@ void __init efi_init_memory(void)
} *extra, *extra_head = NULL;
#endif
+ if ( !efi_enabled(EFI_BOOT) )
+ return;
+
printk(XENLOG_INFO "EFI memory map:%s\n",
map_bs ? " (mapping BootServices)" : "");
for ( i = 0; i < efi_memmap_size; i += efi_mdesc_size )
diff --git a/xen/common/efi/runtime.c b/xen/common/efi/runtime.c
index 5f2de80..41f49f7 100644
--- a/xen/common/efi/runtime.c
+++ b/xen/common/efi/runtime.c
@@ -174,6 +174,9 @@ int efi_get_info(uint32_t idx, union xenpf_efi_info *info)
{
unsigned int i, n;
+ if ( !efi_enabled(EFI_BOOT) )
+ return -ENOSYS;
+
switch ( idx )
{
case XEN_FW_EFI_VERSION:
@@ -308,6 +311,12 @@ int efi_runtime_call(struct xenpf_efi_runtime_call *op)
EFI_STATUS status = EFI_NOT_STARTED;
int rc = 0;
+ if ( !efi_enabled(EFI_BOOT) )
+ return -ENOSYS;
+
+ if ( !efi_enabled(EFI_RS) )
+ return -EOPNOTSUPP;
+
switch ( op->function )
{
case XEN_EFI_get_time:
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 06/13] efi: create new early memory allocator
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
` (4 preceding siblings ...)
2016-09-28 22:51 ` [PATCH v8 05/13] efi: build xen.gz with EFI code Daniel Kiper
@ 2016-09-28 22:51 ` Daniel Kiper
2016-09-29 7:40 ` Jan Beulich
2016-09-28 22:51 ` [PATCH v8 07/13] x86: add multiboot2 protocol support for EFI platforms Daniel Kiper
` (6 subsequent siblings)
12 siblings, 1 reply; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
There is a problem with place_string() which is used as early memory
allocator. It gets memory chunks starting from start symbol and goes
down. Sadly this does not work when Xen is loaded using multiboot2
protocol because then the start lives on 1 MiB address and we should
not allocate a memory from below of it. So, I tried to use mem_lower
address calculated by GRUB2. However, this solution works only on some
machines. There are machines in the wild (e.g. Dell PowerEdge R820)
which uses first ~640 KiB for boot services code or data... :-(((
Hence, we need new memory allocator for Xen EFI boot code which is
quite simple and generic and could be used by place_string() and
efi_arch_allocate_mmap_buffer(). I think about following solutions:
1) We could use native EFI allocation functions (e.g. AllocatePool()
or AllocatePages()) to get memory chunk. However, later (somewhere
in __start_xen()) we must copy its contents to safe place or reserve
it in e820 memory map and map it in Xen virtual address space. This
means that the code referring to Xen command line, loaded modules and
EFI memory map, mostly in __start_xen(), will be further complicated
and diverge from legacy BIOS cases. Additionally, both former things
have to be placed below 4 GiB because their addresses are stored in
multiboot_info_t structure which has 32-bit relevant members.
2) We may allocate memory area statically somewhere in Xen code which
could be used as memory pool for early dynamic allocations. Looks
quite simple. Additionally, it would not depend on EFI at all and
could be used on legacy BIOS platforms if we need it. However, we
must carefully choose size of this pool. We do not want increase Xen
binary size too much and waste too much memory but also we must fit
at least memory map on x86 EFI platforms. As I saw on small machine,
e.g. IBM System x3550 M2 with 8 GiB RAM, memory map may contain more
than 200 entries. Every entry on x86-64 platform is 40 bytes in size.
So, it means that we need more than 8 KiB for EFI memory map only.
Additionally, if we use this memory pool for Xen and modules command
line storage (it would be used when xen.efi is executed as EFI application)
then we should add, I think, about 1 KiB. In this case, to be on safe
side, we should assume at least 64 KiB pool for early memory allocations.
Which is about 4 times of our earlier calculations. However, during
discussion on Xen-devel Jan Beulich suggested that just in case we should
use 1 MiB memory pool like it is in original place_string() implementation.
So, let's use 1 MiB as it was proposed. If we think that we should not
waste unallocated memory in the pool on running system then we can mark
this region as __initdata and move all required data to dynamically
allocated places somewhere in __start_xen().
2a) We could put memory pool into .bss.page_aligned section. Then allocate
memory chunks starting from the lowest address. After init phase we can
free unused portion of the memory pool as in case of .init.text or .init.data
sections. This way we do not need to allocate any space in image file and
freeing of unused area in the memory pool is very simple.
Now #2a solution is implemented because it is quite simple and requires
limited number of changes, especially in __start_xen().
New allocator is quite generic and can be used on ARM platforms too.
Though it is not enabled on ARM yet due to lack of some prereq.
List of them is placed before ebmalloc code.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
---
v8 - suggestions/fixes:
- disable whole ebmalloc machinery on ARM platforms,
- add comment saying what should be done before
enabling ebmalloc on ARM,
(suggested by Julien Grall),
- move ebmalloc code before efi-boot.h inclusion and
remove unneeded forward declaration
(suggested by Jan Beulich),
- remove free_ebmalloc_unused_mem() call from
xen/arch/arm/setup.c:init_done()
(suggested by Julien Grall),
- improve commit message.
v7 - suggestions/fixes:
- enable most of ebmalloc machinery on ARM platforms
(suggested by Jan Beulich),
- remove unneeded cast
(suggested by Jan Beulich),
- wrap long line
(suggested by Jan Beulich),
- improve commit message.
v6 - suggestions/fixes:
- optimize ebmalloc allocator,
- move ebmalloc machinery to xen/common/efi/boot.c
(suggested by Jan Beulich),
- enforce PAGE_SIZE ebmalloc_mem alignment
(suggested by Jan Beulich),
- ebmalloc() must allocate properly
aligned memory regions
(suggested by Jan Beulich),
- printk() should use XENLOG_INFO
(suggested by Jan Beulich).
v4 - suggestions/fixes:
- move from #2 solution to #2a solution,
- improve commit message.
---
xen/arch/x86/efi/efi-boot.h | 11 +++-------
xen/arch/x86/efi/stub.c | 2 ++
xen/arch/x86/setup.c | 5 +++--
xen/common/efi/boot.c | 50 +++++++++++++++++++++++++++++++++++++++++++
xen/include/xen/efi.h | 1 +
5 files changed, 59 insertions(+), 10 deletions(-)
diff --git a/xen/arch/x86/efi/efi-boot.h b/xen/arch/x86/efi/efi-boot.h
index 388c4ea..62c010e 100644
--- a/xen/arch/x86/efi/efi-boot.h
+++ b/xen/arch/x86/efi/efi-boot.h
@@ -114,7 +114,7 @@ static void __init relocate_trampoline(unsigned long phys)
static void __init place_string(u32 *addr, const char *s)
{
- static char *__initdata alloc = start;
+ char *alloc = NULL;
if ( s && *s )
{
@@ -122,7 +122,7 @@ static void __init place_string(u32 *addr, const char *s)
const char *old = (char *)(long)*addr;
size_t len2 = *addr ? strlen(old) + 1 : 0;
- alloc -= len1 + len2;
+ alloc = ebmalloc(len1 + len2);
/*
* Insert new string before already existing one. This is needed
* for options passed on the command line to override options from
@@ -205,12 +205,7 @@ static void __init efi_arch_process_memory_map(EFI_SYSTEM_TABLE *SystemTable,
static void *__init efi_arch_allocate_mmap_buffer(UINTN map_size)
{
- place_string(&mbi.mem_upper, NULL);
- mbi.mem_upper -= map_size;
- mbi.mem_upper &= -__alignof__(EFI_MEMORY_DESCRIPTOR);
- if ( mbi.mem_upper < xen_phys_start )
- return NULL;
- return (void *)(long)mbi.mem_upper;
+ return ebmalloc(map_size);
}
static void __init efi_arch_pre_exit_boot(void)
diff --git a/xen/arch/x86/efi/stub.c b/xen/arch/x86/efi/stub.c
index 4158124..bc9919c 100644
--- a/xen/arch/x86/efi/stub.c
+++ b/xen/arch/x86/efi/stub.c
@@ -9,6 +9,8 @@ bool efi_enabled(unsigned int feature)
return false;
}
+void __init free_ebmalloc_unused_mem(void) { }
+
void __init efi_init_memory(void) { }
void efi_update_l4_pgtable(unsigned int l4idx, l4_pgentry_t l4e) { }
diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index 06f3970..5b17783 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -520,6 +520,8 @@ static void noinline init_done(void)
system_state = SYS_STATE_active;
+ free_ebmalloc_unused_mem();
+
/* MUST be done prior to removing .init data. */
unregister_init_virtual_region();
@@ -1080,8 +1082,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)
if ( !xen_phys_start )
panic("Not enough memory to relocate Xen.");
- reserve_e820_ram(&boot_e820, efi_enabled(EFI_LOADER) ? mbi->mem_upper : __pa(&_start),
- __pa(&_end));
+ reserve_e820_ram(&boot_e820, __pa(&_start), __pa(&_end));
/* Late kexec reservation (dynamic start address). */
kexec_reserve_area(&boot_e820);
diff --git a/xen/common/efi/boot.c b/xen/common/efi/boot.c
index 1ef5d0b..fc76695 100644
--- a/xen/common/efi/boot.c
+++ b/xen/common/efi/boot.c
@@ -98,6 +98,56 @@ static CHAR16 __initdata newline[] = L"\r\n";
#define PrintStr(s) StdOut->OutputString(StdOut, s)
#define PrintErr(s) StdErr->OutputString(StdErr, s)
+#ifndef CONFIG_ARM
+
+/*
+ * TODO: Enable EFI boot allocator on ARM.
+ * This code can be common for x86 and ARM.
+ * Things TODO on ARM before enabling ebmalloc:
+ * - estimate required EBMALLOC_SIZE value,
+ * - where (in which section) ebmalloc_mem[]
+ * should live; if in .bss.page_aligned
+ * then whole BSS zeroing have to be
+ * disabled in xen/arch/arm/arm64/head.S;
+ * though BSS should be initialized somehow
+ * before use of variables living there,
+ * - add free_ebmalloc_unused_mem() call to
+ * e.g. xen/arch/arm/setup.c:init_done().
+ */
+
+#define EBMALLOC_SIZE MB(1)
+
+static char __section(".bss.page_aligned") __aligned(PAGE_SIZE)
+ ebmalloc_mem[EBMALLOC_SIZE];
+static unsigned long __initdata ebmalloc_allocated;
+
+/* EFI boot allocator. */
+static void __init *ebmalloc(size_t size)
+{
+ void *ptr = ebmalloc_mem + ebmalloc_allocated;
+
+ ebmalloc_allocated += (size + sizeof(void *) - 1) & ~(sizeof(void *) - 1);
+
+ if ( ebmalloc_allocated > sizeof(ebmalloc_mem) )
+ blexit(L"Out of static memory\r\n");
+
+ return ptr;
+}
+
+void __init free_ebmalloc_unused_mem(void)
+{
+ unsigned long start, end;
+
+ start = (unsigned long)ebmalloc_mem + PAGE_ALIGN(ebmalloc_allocated);
+ end = (unsigned long)ebmalloc_mem + sizeof(ebmalloc_mem);
+
+ destroy_xen_mappings(start, end);
+ init_xenheap_pages(__pa(start), __pa(end));
+
+ printk(XENLOG_INFO "Freed %lukB unused BSS memory\n", (end - start) >> 10);
+}
+#endif
+
/*
* Include architecture specific implementation here, which references the
* static globals defined above.
diff --git a/xen/include/xen/efi.h b/xen/include/xen/efi.h
index 68c68a8..6c7f601 100644
--- a/xen/include/xen/efi.h
+++ b/xen/include/xen/efi.h
@@ -32,6 +32,7 @@ struct xenpf_efi_runtime_call;
struct compat_pf_efi_runtime_call;
bool efi_enabled(unsigned int feature);
+void free_ebmalloc_unused_mem(void);
void efi_init_memory(void);
bool_t efi_rs_using_pgtables(void);
unsigned long efi_get_time(void);
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 07/13] x86: add multiboot2 protocol support for EFI platforms
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
` (5 preceding siblings ...)
2016-09-28 22:51 ` [PATCH v8 06/13] efi: create new early memory allocator Daniel Kiper
@ 2016-09-28 22:51 ` Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 08/13] x86/boot: implement early command line parser in C Daniel Kiper
` (5 subsequent siblings)
12 siblings, 0 replies; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
This way Xen can be loaded on EFI platforms using GRUB2 and
other boot loaders which support multiboot2 protocol.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
---
v8 - suggestions/fixes:
- use __bss_start(%rip)/__bss_end(%rip) instead of
of .startof.(.bss)(%rip)/$.sizeof.(.bss) because
latter is not tested extensively in different
built environments yet
(suggested by Andrew Cooper),
- fix multiboot2 data scanning loop in x86_32 code
(suggested by Jan Beulich),
- add check for extra mem for mbi data if Xen is loaded
via multiboot2 protocol on EFI platform
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich).
v7 - suggestions/fixes:
- do not allocate twice memory for trampoline if we were
loaded via multiboot2 protocol on EFI platform,
- wrap long line
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich).
v6 - suggestions/fixes:
- improve label names in assembly
error printing code
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich),
- various minor cleanups and fixes
(suggested by Jan Beulich).
v4 - suggestions/fixes:
- remove redundant BSS alignment,
- update BSS alignment check,
- use __set_bit() instead of set_bit() if possible
(suggested by Jan Beulich),
- call efi_arch_cpu() from efi_multiboot2()
even if the same work is done later in
other place right now
(suggested by Jan Beulich),
- xen/arch/x86/efi/stub.c:efi_multiboot2()
fail properly on EFI platforms,
- do not read data beyond the end of multiboot2
information in xen/arch/x86/boot/head.S
(suggested by Jan Beulich),
- use 32-bit registers in x86_64 code if possible
(suggested by Jan Beulich),
- multiboot2 information address is 64-bit
in x86_64 code, so, treat it is as is
(suggested by Jan Beulich),
- use cmovcc if possible,
- leave only one space between rep and stosq
(suggested by Jan Beulich),
- improve error handling,
- improve early error messages,
(suggested by Jan Beulich),
- improve early error messages printing code,
- improve label names
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich),
- various minor cleanups.
v3 - suggestions/fixes:
- take into account alignment when skipping multiboot2 fixed part
(suggested by Konrad Rzeszutek Wilk),
- improve segment registers initialization
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich and Konrad Rzeszutek Wilk),
- improve commit message
(suggested by Jan Beulich).
v2 - suggestions/fixes:
- generate multiboot2 header using macros
(suggested by Jan Beulich),
- switch CPU to x86_32 mode before
jumping to 32-bit code
(suggested by Andrew Cooper),
- reduce code changes to increase patch readability
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich),
- ignore MULTIBOOT2_TAG_TYPE_BASIC_MEMINFO tag on EFI platform
and find on my own multiboot2.mem_lower value,
- stop execution if EFI platform is detected
in legacy BIOS path.
---
xen/arch/x86/boot/head.S | 260 ++++++++++++++++++++++++++++++++++---
xen/arch/x86/efi/efi-boot.h | 54 +++++++-
xen/arch/x86/efi/stub.c | 38 ++++++
xen/arch/x86/x86_64/asm-offsets.c | 2 +
xen/arch/x86/xen.lds.S | 4 +-
xen/common/efi/boot.c | 11 ++
6 files changed, 346 insertions(+), 23 deletions(-)
diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index 383ff79..3c4b1e2 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -89,6 +89,13 @@ multiboot2_header_start:
0, /* Number of the lines - no preference. */ \
0 /* Number of bits per pixel - no preference. */
+ /* Inhibit bootloader from calling ExitBootServices(). */
+ mb2ht_init MB2_HT(EFI_BS), MB2_HT(OPTIONAL)
+
+ /* EFI64 entry point. */
+ mb2ht_init MB2_HT(ENTRY_ADDRESS_EFI64), MB2_HT(OPTIONAL), \
+ sym_phys(__efi64_start)
+
/* Multiboot2 header end tag. */
mb2ht_init MB2_HT(END), MB2_HT(REQUIRED)
.Lmultiboot2_header_end:
@@ -100,20 +107,49 @@ multiboot2_header_start:
gdt_boot_descr:
.word 6*8-1
.long sym_phys(trampoline_gdt)
+ .long 0 /* Needed for 64-bit lgdt */
+
+cs32_switch_addr:
+ .long sym_phys(cs32_switch)
+ .word BOOT_CS32
+
+ .align 4
+vga_text_buffer:
+ .long 0xb8000
.Lbad_cpu_msg: .asciz "ERR: Not a 64-bit CPU!"
.Lbad_ldr_msg: .asciz "ERR: Not a Multiboot bootloader!"
+.Lbad_ldr_nbs: .asciz "ERR: Bootloader shutdown EFI x64 boot services!"
+.Lbad_ldr_nst: .asciz "ERR: EFI SystemTable is not provided by bootloader!"
+.Lbad_ldr_nih: .asciz "ERR: EFI ImageHandle is not provided by bootloader!"
+.Lbad_efi_msg: .asciz "ERR: EFI IA-32 platforms are not supported!"
.section .init.text, "ax", @progbits
bad_cpu:
mov $(sym_phys(.Lbad_cpu_msg)),%esi # Error message
- jmp print_err
+ jmp .Lget_vtb
not_multiboot:
mov $(sym_phys(.Lbad_ldr_msg)),%esi # Error message
-print_err:
- mov $0xB8000,%edi # VGA framebuffer
-1: mov (%esi),%bl
+ jmp .Lget_vtb
+.Lmb2_no_st:
+ mov $(sym_phys(.Lbad_ldr_nst)),%esi # Error message
+ jmp .Lget_vtb
+.Lmb2_no_ih:
+ mov $(sym_phys(.Lbad_ldr_nih)),%esi # Error message
+ jmp .Lget_vtb
+.Lmb2_no_bs:
+ mov $(sym_phys(.Lbad_ldr_nbs)),%esi # Error message
+ xor %edi,%edi # No VGA text buffer
+ jmp .Lsend_chr
+.Lmb2_efi_ia_32:
+ mov $(sym_phys(.Lbad_efi_msg)),%esi # Error message
+ xor %edi,%edi # No VGA text buffer
+ jmp .Lsend_chr
+.Lget_vtb:
+ mov sym_phys(vga_text_buffer),%edi
+.Lsend_chr:
+ mov (%esi),%bl
test %bl,%bl # Terminate on '\0' sentinel
je .Lhalt
mov $0x3f8+5,%dx # UART Line Status Register
@@ -123,13 +159,182 @@ print_err:
mov $0x3f8+0,%dx # UART Transmit Holding Register
mov %bl,%al
out %al,%dx # Send a character over the serial line
- movsb # Write a character to the VGA framebuffer
+ test %edi,%edi # Is the VGA text buffer available?
+ jz .Lsend_chr
+ movsb # Write a character to the VGA text buffer
mov $7,%al
- stosb # Write an attribute to the VGA framebuffer
- jmp 1b
+ stosb # Write an attribute to the VGA text buffer
+ jmp .Lsend_chr
.Lhalt: hlt
jmp .Lhalt
+ .code64
+
+__efi64_start:
+ cld
+
+ /* VGA is not available on EFI platforms. */
+ movl $0,vga_text_buffer(%rip)
+
+ /* Check for Multiboot2 bootloader. */
+ cmp $MULTIBOOT2_BOOTLOADER_MAGIC,%eax
+ je .Lefi_multiboot2_proto
+
+ /* Jump to not_multiboot after switching CPU to x86_32 mode. */
+ lea not_multiboot(%rip),%edi
+ jmp x86_32_switch
+
+.Lefi_multiboot2_proto:
+ /* Zero EFI SystemTable and EFI ImageHandle addresses. */
+ xor %esi,%esi
+ xor %edi,%edi
+
+ /* Skip Multiboot2 information fixed part. */
+ lea (MB2_fixed_sizeof+MULTIBOOT2_TAG_ALIGN-1)(%rbx),%ecx
+ and $~(MULTIBOOT2_TAG_ALIGN-1),%ecx
+
+0:
+ /* Check Multiboot2 information total size. */
+ mov %ecx,%r8d
+ sub %ebx,%r8d
+ cmp %r8d,MB2_fixed_total_size(%rbx)
+ jbe run_bs
+
+ /* Are EFI boot services available? */
+ cmpl $MULTIBOOT2_TAG_TYPE_EFI_BS,MB2_tag_type(%rcx)
+ jne 1f
+
+ /*
+ * Yes, store that info in skip_realmode variable. I agree that
+ * its name is a bit unfortunate in this context, however, by the
+ * way we disable real mode and other legacy stuff which should
+ * not be run on EFI platforms.
+ */
+ incb skip_realmode(%rip)
+ jmp 9f
+
+1:
+ /* Get EFI SystemTable address from Multiboot2 information. */
+ cmpl $MULTIBOOT2_TAG_TYPE_EFI64,MB2_tag_type(%rcx)
+ cmove MB2_efi64_st(%rcx),%rsi
+ je 9f
+
+ /* Get EFI ImageHandle address from Multiboot2 information. */
+ cmpl $MULTIBOOT2_TAG_TYPE_EFI64_IH,MB2_tag_type(%rcx)
+ cmove MB2_efi64_ih(%rcx),%rdi
+ je 9f
+
+ /* Is it the end of Multiboot2 information? */
+ cmpl $MULTIBOOT2_TAG_TYPE_END,MB2_tag_type(%rcx)
+ je run_bs
+
+9:
+ /* Go to next Multiboot2 information tag. */
+ add MB2_tag_size(%rcx),%ecx
+ add $(MULTIBOOT2_TAG_ALIGN-1),%ecx
+ and $~(MULTIBOOT2_TAG_ALIGN-1),%ecx
+ jmp 0b
+
+run_bs:
+ /* Are EFI boot services available? */
+ cmpb $0,skip_realmode(%rip)
+ jnz 0f
+
+ /* Jump to .Lmb2_no_bs after switching CPU to x86_32 mode. */
+ lea .Lmb2_no_bs(%rip),%edi
+ jmp x86_32_switch
+
+0:
+ /* Is EFI SystemTable address provided by boot loader? */
+ test %rsi,%rsi
+ jnz 1f
+
+ /* Jump to .Lmb2_no_st after switching CPU to x86_32 mode. */
+ lea .Lmb2_no_st(%rip),%edi
+ jmp x86_32_switch
+
+1:
+ /* Is EFI ImageHandle address provided by boot loader? */
+ test %rdi,%rdi
+ jnz 2f
+
+ /* Jump to .Lmb2_no_ih after switching CPU to x86_32 mode. */
+ lea .Lmb2_no_ih(%rip),%edi
+ jmp x86_32_switch
+
+2:
+ push %rax
+ push %rdi
+
+ /*
+ * Initialize BSS (no nasty surprises!).
+ * It must be done earlier than in BIOS case
+ * because efi_multiboot2() touches it.
+ */
+ lea __bss_start(%rip),%edi
+ lea __bss_end(%rip),%ecx
+ sub %edi,%ecx
+ shr $3,%ecx
+ xor %eax,%eax
+ rep stosq
+
+ pop %rdi
+
+ /*
+ * efi_multiboot2() is called according to System V AMD64 ABI:
+ * - IN: %rdi - EFI ImageHandle, %rsi - EFI SystemTable,
+ * - OUT: %rax - highest usable memory address below 1 MiB;
+ * memory above this address is reserved for trampoline;
+ * memory below this address is used as a storage for
+ * mbi struct created in reloc().
+ *
+ * MULTIBOOT2_TAG_TYPE_BASIC_MEMINFO tag is not provided
+ * on EFI platforms. Hence, it could not be used like
+ * on legacy BIOS platforms.
+ */
+ call efi_multiboot2
+
+ /* Convert memory address to bytes/16 and store it in safe place. */
+ shr $4,%eax
+ mov %eax,%ecx
+
+ pop %rax
+
+ /* Jump to trampoline_setup after switching CPU to x86_32 mode. */
+ lea trampoline_setup(%rip),%edi
+
+x86_32_switch:
+ cli
+
+ /* Initialize GDTR. */
+ lgdt gdt_boot_descr(%rip)
+
+ /* Reload code selector. */
+ ljmpl *cs32_switch_addr(%rip)
+
+ .code32
+
+cs32_switch:
+ /* Initialize basic data segments. */
+ mov $BOOT_DS,%edx
+ mov %edx,%ds
+ mov %edx,%es
+ mov %edx,%ss
+ /* %esp is initialized later. */
+
+ /* Load null descriptor to unused segment registers. */
+ xor %edx,%edx
+ mov %edx,%fs
+ mov %edx,%gs
+
+ /* Disable paging. */
+ mov %cr0,%edx
+ and $(~X86_CR0_PG),%edx
+ mov %edx,%cr0
+
+ /* Jump to earlier loaded address. */
+ jmp *%edi
+
__start:
cld
cli
@@ -157,7 +362,7 @@ __start:
/* Not available? BDA value will be fine. */
cmovnz MB_mem_lower(%ebx),%edx
- jmp trampoline_setup
+ jmp trampoline_bios_setup
.Lmultiboot2_proto:
/* Skip Multiboot2 information fixed part. */
@@ -169,24 +374,33 @@ __start:
mov %ecx,%edi
sub %ebx,%edi
cmp %edi,MB2_fixed_total_size(%ebx)
- jbe trampoline_setup
+ jbe trampoline_bios_setup
/* Get mem_lower from Multiboot2 information. */
cmpl $MULTIBOOT2_TAG_TYPE_BASIC_MEMINFO,MB2_tag_type(%ecx)
cmove MB2_mem_lower(%ecx),%edx
- je trampoline_setup
+ je 9f
+
+ /* EFI IA-32 platforms are not supported. */
+ cmpl $MULTIBOOT2_TAG_TYPE_EFI32,MB2_tag_type(%ecx)
+ je .Lmb2_efi_ia_32
+
+ /* Bootloader shutdown EFI x64 boot services. */
+ cmpl $MULTIBOOT2_TAG_TYPE_EFI64,MB2_tag_type(%ecx)
+ je .Lmb2_no_bs
/* Is it the end of Multiboot2 information? */
cmpl $MULTIBOOT2_TAG_TYPE_END,MB2_tag_type(%ecx)
- je trampoline_setup
+ je trampoline_bios_setup
+9:
/* Go to next Multiboot2 information tag. */
add MB2_tag_size(%ecx),%ecx
add $(MULTIBOOT2_TAG_ALIGN-1),%ecx
and $~(MULTIBOOT2_TAG_ALIGN-1),%ecx
jmp 0b
-trampoline_setup:
+trampoline_bios_setup:
/* Set up trampoline segment 64k below EBDA */
movzwl 0x40e,%ecx /* EBDA segment */
cmp $0xa000,%ecx /* sanity check (high) */
@@ -202,16 +416,19 @@ trampoline_setup:
* multiboot structure (if available) and use the smallest.
*/
cmp $0x100,%edx /* is the multiboot value too small? */
- jb 2f /* if so, do not use it */
+ jb trampoline_setup /* if so, do not use it */
shl $10-4,%edx
cmp %ecx,%edx /* compare with BDA value */
cmovb %edx,%ecx /* and use the smaller */
-2: /* Reserve 64kb for the trampoline */
+ /* Reserve 64kb for the trampoline. */
sub $0x1000,%ecx
/* From arch/x86/smpboot.c: start_eip had better be page-aligned! */
xor %cl, %cl
+
+trampoline_setup:
+ /* Save trampoline address for later use. */
shl $4, %ecx
mov %ecx,sym_phys(trampoline_phys)
@@ -223,7 +440,14 @@ trampoline_setup:
call reloc
mov %eax,sym_phys(multiboot_ptr)
- /* Initialize BSS (no nasty surprises!) */
+ /*
+ * Do not zero BSS on EFI platform here.
+ * It was initialized earlier.
+ */
+ cmpb $0,sym_phys(skip_realmode)
+ jnz 1f
+
+ /* Initialize BSS (no nasty surprises!). */
mov $sym_phys(__bss_start),%edi
mov $sym_phys(__bss_end),%ecx
sub %edi,%ecx
@@ -231,6 +455,7 @@ trampoline_setup:
shr $2,%ecx
rep stosl
+1:
/* Interrogate CPU extended features via CPUID. */
mov $0x80000000,%eax
cpuid
@@ -282,8 +507,13 @@ trampoline_setup:
cmp $sym_phys(__trampoline_seg_stop),%edi
jb 1b
+ /* Do not parse command line on EFI platform here. */
+ cmpb $0,sym_phys(skip_realmode)
+ jnz 1f
+
call cmdline_parse_early
+1:
/* Switch to low-memory stack. */
mov sym_phys(trampoline_phys),%edi
lea 0x10000(%edi),%esp
diff --git a/xen/arch/x86/efi/efi-boot.h b/xen/arch/x86/efi/efi-boot.h
index 62c010e..dc857d8 100644
--- a/xen/arch/x86/efi/efi-boot.h
+++ b/xen/arch/x86/efi/efi-boot.h
@@ -146,6 +146,8 @@ static void __init efi_arch_process_memory_map(EFI_SYSTEM_TABLE *SystemTable,
{
struct e820entry *e;
unsigned int i;
+ /* Check for extra mem for mbi data if Xen is loaded via multiboot2 protocol. */
+ UINTN extra_mem = efi_enabled(EFI_LOADER) ? 0 : (64 << 10);
/* Populate E820 table and check trampoline area availability. */
e = e820map - 1;
@@ -168,7 +170,8 @@ static void __init efi_arch_process_memory_map(EFI_SYSTEM_TABLE *SystemTable,
/* fall through */
case EfiConventionalMemory:
if ( !trampoline_phys && desc->PhysicalStart + len <= 0x100000 &&
- len >= cfg.size && desc->PhysicalStart + len > cfg.addr )
+ len >= cfg.size + extra_mem &&
+ desc->PhysicalStart + len > cfg.addr )
cfg.addr = (desc->PhysicalStart + len - cfg.size) & PAGE_MASK;
/* fall through */
case EfiLoaderCode:
@@ -210,12 +213,14 @@ static void *__init efi_arch_allocate_mmap_buffer(UINTN map_size)
static void __init efi_arch_pre_exit_boot(void)
{
- if ( !trampoline_phys )
- {
- if ( !cfg.addr )
- blexit(L"No memory for trampoline");
+ if ( trampoline_phys )
+ return;
+
+ if ( !cfg.addr )
+ blexit(L"No memory for trampoline");
+
+ if ( efi_enabled(EFI_LOADER) )
relocate_trampoline(cfg.addr);
- }
}
static void __init noreturn efi_arch_post_exit_boot(void)
@@ -653,6 +658,43 @@ static bool_t __init efi_arch_use_config_file(EFI_SYSTEM_TABLE *SystemTable)
static void efi_arch_flush_dcache_area(const void *vaddr, UINTN size) { }
+paddr_t __init efi_multiboot2(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
+{
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *gop;
+ UINTN cols, gop_mode = ~0, rows;
+
+ __set_bit(EFI_BOOT, &efi_flags);
+ __set_bit(EFI_RS, &efi_flags);
+
+ efi_init(ImageHandle, SystemTable);
+
+ efi_console_set_mode();
+
+ if ( StdOut->QueryMode(StdOut, StdOut->Mode->Mode,
+ &cols, &rows) == EFI_SUCCESS )
+ efi_arch_console_init(cols, rows);
+
+ gop = efi_get_gop();
+
+ if ( gop )
+ gop_mode = efi_find_gop_mode(gop, 0, 0, 0);
+
+ efi_arch_edd();
+ efi_arch_cpu();
+
+ efi_tables();
+ setup_efi_pci();
+ efi_variables();
+
+ if ( gop )
+ efi_set_gop_mode(gop, gop_mode);
+
+ efi_exit_boot(ImageHandle, SystemTable);
+
+ /* Return highest usable memory address below 1 MiB. */
+ return cfg.addr;
+}
+
/*
* Local variables:
* mode: C
diff --git a/xen/arch/x86/efi/stub.c b/xen/arch/x86/efi/stub.c
index bc9919c..232dd12 100644
--- a/xen/arch/x86/efi/stub.c
+++ b/xen/arch/x86/efi/stub.c
@@ -3,6 +3,44 @@
#include <xen/init.h>
#include <xen/lib.h>
#include <asm/page.h>
+#include <asm/efibind.h>
+#include <efi/efidef.h>
+#include <efi/eficapsule.h>
+#include <efi/eficon.h>
+#include <efi/efidevp.h>
+#include <efi/efiapi.h>
+
+/*
+ * Here we are in EFI stub. EFI calls are not supported due to lack
+ * of relevant functionality in compiler and/or linker.
+ *
+ * efi_multiboot2() is an exception. Please look below for more details.
+ */
+
+paddr_t __init noreturn efi_multiboot2(EFI_HANDLE ImageHandle,
+ EFI_SYSTEM_TABLE *SystemTable)
+{
+ CHAR16 *err = L"Xen does not have EFI code build in!!!\r\nSystem halted!!!\r\n";
+ SIMPLE_TEXT_OUTPUT_INTERFACE *StdErr;
+
+ StdErr = SystemTable->StdErr ? SystemTable->StdErr : SystemTable->ConOut;
+
+ /*
+ * Print error message and halt the system.
+ *
+ * We have to open code MS x64 calling convention
+ * in assembly because here this convention may
+ * not be directly supported by C compiler.
+ */
+ asm volatile(
+ " call %2 \n"
+ "0: hlt \n"
+ " jmp 0b \n"
+ : "+c" (StdErr), "+d" (err) : "g" (StdErr->OutputString)
+ : "rax", "r8", "r9", "r10", "r11", "memory");
+
+ unreachable();
+}
bool efi_enabled(unsigned int feature)
{
diff --git a/xen/arch/x86/x86_64/asm-offsets.c b/xen/arch/x86/x86_64/asm-offsets.c
index b437a8f..2a22659 100644
--- a/xen/arch/x86/x86_64/asm-offsets.c
+++ b/xen/arch/x86/x86_64/asm-offsets.c
@@ -175,6 +175,8 @@ void __dummy__(void)
OFFSET(MB2_tag_type, multiboot2_tag_t, type);
OFFSET(MB2_tag_size, multiboot2_tag_t, size);
OFFSET(MB2_mem_lower, multiboot2_tag_basic_meminfo_t, mem_lower);
+ OFFSET(MB2_efi64_st, multiboot2_tag_efi64_t, pointer);
+ OFFSET(MB2_efi64_ih, multiboot2_tag_efi64_ih_t, pointer);
BLANK();
OFFSET(DOMAIN_vm_assist, struct domain, vm_assist);
diff --git a/xen/arch/x86/xen.lds.S b/xen/arch/x86/xen.lds.S
index b0b1c9b..e0e2529 100644
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -331,5 +331,5 @@ ASSERT(IS_ALIGNED(__init_end, PAGE_SIZE), "__init_end misaligned")
ASSERT(IS_ALIGNED(trampoline_start, 4), "trampoline_start misaligned")
ASSERT(IS_ALIGNED(trampoline_end, 4), "trampoline_end misaligned")
-ASSERT(IS_ALIGNED(__bss_start, 4), "__bss_start misaligned")
-ASSERT(IS_ALIGNED(__bss_end, 4), "__bss_end misaligned")
+ASSERT(IS_ALIGNED(__bss_start, 8), "__bss_start misaligned")
+ASSERT(IS_ALIGNED(__bss_end, 8), "__bss_end misaligned")
diff --git a/xen/common/efi/boot.c b/xen/common/efi/boot.c
index fc76695..fd0f981 100644
--- a/xen/common/efi/boot.c
+++ b/xen/common/efi/boot.c
@@ -79,6 +79,17 @@ static size_t wstrlen(const CHAR16 * s);
static int set_color(u32 mask, int bpp, u8 *pos, u8 *sz);
static bool_t match_guid(const EFI_GUID *guid1, const EFI_GUID *guid2);
+static void efi_init(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable);
+static void efi_console_set_mode(void);
+static EFI_GRAPHICS_OUTPUT_PROTOCOL *efi_get_gop(void);
+static UINTN efi_find_gop_mode(EFI_GRAPHICS_OUTPUT_PROTOCOL *gop,
+ UINTN cols, UINTN rows, UINTN depth);
+static void efi_tables(void);
+static void setup_efi_pci(void);
+static void efi_variables(void);
+static void efi_set_gop_mode(EFI_GRAPHICS_OUTPUT_PROTOCOL *gop, UINTN gop_mode);
+static void efi_exit_boot(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable);
+
static const EFI_BOOT_SERVICES *__initdata efi_bs;
static UINT32 __initdata efi_bs_revision;
static EFI_HANDLE __initdata efi_ih;
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 08/13] x86/boot: implement early command line parser in C
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
` (6 preceding siblings ...)
2016-09-28 22:51 ` [PATCH v8 07/13] x86: add multiboot2 protocol support for EFI platforms Daniel Kiper
@ 2016-09-28 22:51 ` Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 09/13] x86: change default load address from 1 MiB to 2 MiB Daniel Kiper
` (4 subsequent siblings)
12 siblings, 0 replies; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
Current early command line parser implementation in assembler
is very difficult to change to relocatable stuff using segment
registers. This requires a lot of changes in very weird and
fragile code. So, reimplement this functionality in C. This
way code will be relocatable out of the box (without playing
with segment registers) and much easier to maintain.
Additionally, put all common cmdline.c and reloc.c definitions
into defs.h header. This way we do not duplicate needlessly
some stuff.
And finally remove unused xen/include/asm-x86/config.h
header from reloc.c dependencies.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
---
v7 - suggestions/fixes:
- add min() macro
(suggested by Jan Beulich),
- add padding to early_boot_opts_t
in more standard way
(suggested by Jan Beulich),
- simplify defs.h dependencies
(suggested by Jan Beulich).
v6 - suggestions/fixes:
- put common cmdline.c and reloc.c
definitions into defs.h header
(suggested by Jan Beulich),
- use xen/include/xen/stdbool.h
and bool type from it instead
of own defined bool_t
(suggested by Jan Beulich),
- define delim_chars as constant
(suggested by Jan Beulich),
- properly align trampoline.S:early_boot_opts struct
(suggested by Jan Beulich),
- fix overflow check in strtoui()
(suggested by Jan Beulich),
- remove unused xen/include/asm-x86/config.h
header from reloc.c dependencies,
- improve commit message.
v4 - suggestions/fixes:
- move to stdcall calling convention
(suggested by Jan Beulich),
- define bool_t and use it properly
(suggested by Jan Beulich),
- put list of delimiter chars into
static const char[]
(suggested by Jan Beulich),
- use strlen() instead of strlen_opt()
(suggested by Jan Beulich),
- change strtoi() to strtoui() and
optimize it a bit
(suggested by Jan Beulich),
- define strchr() and use it in strtoui()
(suggested by Jan Beulich),
- optimize vga_parse()
(suggested by Jan Beulich),
- move !cmdline check from assembly to C
(suggested by Jan Beulich),
- remove my name from copyright (Oracle requirement)
(suggested by Konrad Rzeszutek Wilk).
v3 - suggestions/fixes:
- optimize some code
(suggested by Jan Beulich),
- put VESA data into early_boot_opts_t members
(suggested by Jan Beulich),
- rename some functions and variables
(suggested by Jan Beulich),
- move around video.h include in xen/arch/x86/boot/trampoline.S
(suggested by Jan Beulich),
- fix coding style
(suggested by Jan Beulich),
- fix build with older GCC
(suggested by Konrad Rzeszutek Wilk),
- remove redundant comments
(suggested by Jan Beulich),
- add some comments
- improve commit message
(suggested by Jan Beulich).
---
.gitignore | 5 +-
xen/arch/x86/Makefile | 2 +-
xen/arch/x86/boot/Makefile | 11 +-
xen/arch/x86/boot/build32.mk | 2 +
xen/arch/x86/boot/cmdline.S | 367 ----------------------------------------
xen/arch/x86/boot/cmdline.c | 340 +++++++++++++++++++++++++++++++++++++
xen/arch/x86/boot/defs.h | 58 +++++++
xen/arch/x86/boot/edd.S | 3 -
xen/arch/x86/boot/head.S | 8 +
xen/arch/x86/boot/reloc.c | 13 +-
xen/arch/x86/boot/trampoline.S | 15 ++
xen/arch/x86/boot/video.S | 7 -
12 files changed, 437 insertions(+), 394 deletions(-)
delete mode 100644 xen/arch/x86/boot/cmdline.S
create mode 100644 xen/arch/x86/boot/cmdline.c
create mode 100644 xen/arch/x86/boot/defs.h
diff --git a/.gitignore b/.gitignore
index eeabe0b..1cd886f 100644
--- a/.gitignore
+++ b/.gitignore
@@ -247,9 +247,10 @@ xen/arch/arm/xen.lds
xen/arch/x86/asm-offsets.s
xen/arch/x86/boot/mkelf32
xen/arch/x86/xen.lds
+xen/arch/x86/boot/cmdline.S
xen/arch/x86/boot/reloc.S
-xen/arch/x86/boot/reloc.bin
-xen/arch/x86/boot/reloc.lnk
+xen/arch/x86/boot/*.bin
+xen/arch/x86/boot/*.lnk
xen/arch/x86/efi.lds
xen/arch/x86/efi/check.efi
xen/arch/x86/efi/disabled
diff --git a/xen/arch/x86/Makefile b/xen/arch/x86/Makefile
index 3972dd5..8b68c06 100644
--- a/xen/arch/x86/Makefile
+++ b/xen/arch/x86/Makefile
@@ -220,5 +220,5 @@ clean::
rm -f asm-offsets.s *.lds boot/*.o boot/*~ boot/core boot/mkelf32
rm -f $(BASEDIR)/.xen-syms.[0-9]* boot/.*.d
rm -f $(BASEDIR)/.xen.efi.[0-9]* efi/*.efi efi/disabled efi/mkreloc
- rm -f boot/reloc.S boot/reloc.lnk boot/reloc.bin
+ rm -f boot/cmdline.S boot/reloc.S boot/*.lnk boot/*.bin
rm -f note.o
diff --git a/xen/arch/x86/boot/Makefile b/xen/arch/x86/boot/Makefile
index 06893d8..c6246c8 100644
--- a/xen/arch/x86/boot/Makefile
+++ b/xen/arch/x86/boot/Makefile
@@ -1,9 +1,16 @@
obj-bin-y += head.o
-RELOC_DEPS = $(BASEDIR)/include/asm-x86/config.h $(BASEDIR)/include/xen/multiboot.h \
+DEFS_H_DEPS = defs.h $(BASEDIR)/include/xen/stdbool.h
+
+CMDLINE_DEPS = $(DEFS_H_DEPS) video.h
+
+RELOC_DEPS = $(DEFS_H_DEPS) $(BASEDIR)/include/xen/multiboot.h \
$(BASEDIR)/include/xen/multiboot2.h
-head.o: reloc.S
+head.o: cmdline.S reloc.S
+
+cmdline.S: cmdline.c $(CMDLINE_DEPS)
+ $(MAKE) -f build32.mk $@ CMDLINE_DEPS="$(CMDLINE_DEPS)"
reloc.S: reloc.c $(RELOC_DEPS)
$(MAKE) -f build32.mk $@ RELOC_DEPS="$(RELOC_DEPS)"
diff --git a/xen/arch/x86/boot/build32.mk b/xen/arch/x86/boot/build32.mk
index 39e6453..3d01698 100644
--- a/xen/arch/x86/boot/build32.mk
+++ b/xen/arch/x86/boot/build32.mk
@@ -32,6 +32,8 @@ CFLAGS := $(filter-out -flto,$(CFLAGS))
%.o: %.c
$(CC) $(CFLAGS) -c -fpic $< -o $@
+cmdline.o: cmdline.c $(CMDLINE_DEPS)
+
reloc.o: reloc.c $(RELOC_DEPS)
.PRECIOUS: %.bin %.lnk
diff --git a/xen/arch/x86/boot/cmdline.S b/xen/arch/x86/boot/cmdline.S
deleted file mode 100644
index 00687eb..0000000
--- a/xen/arch/x86/boot/cmdline.S
+++ /dev/null
@@ -1,367 +0,0 @@
-/******************************************************************************
- * cmdline.S
- *
- * Early command-line parsing.
- */
-
- .code32
-
-#include "video.h"
-
-# NB. String pointer on stack is modified to point past parsed digits.
-.Latoi:
- push %ebx
- push %ecx
- push %edx
- push %esi
- xor %ebx,%ebx /* %ebx = accumulator */
- mov $10,%ecx /* %ecx = base (default base 10) */
- mov 16+4(%esp),%esi /* %esi = pointer into ascii string. */
- lodsb
- cmpb $'0',%al
- jne 2f
- mov $8,%ecx /* Prefix '0' => octal (base 8) */
- lodsb
- cmpb $'x',%al
- jne 2f
- mov $16,%ecx /* Prefix '0x' => hex (base 16) */
-1: lodsb
-2: sub $'0',%al
- jb 4f
- cmp $9,%al
- jbe 3f
- sub $'A'-'0'-10,%al
- jb 4f
- cmp $15,%al
- jbe 3f
- sub $'a'-'A',%al
- jb 4f
-3: cmp %cl,%al
- jae 4f
- movzbl %al,%eax
- xchg %eax,%ebx
- mul %ecx
- xchg %eax,%ebx
- add %eax,%ebx
- jmp 1b
-4: mov %ebx,%eax
- dec %esi
- mov %esi,16+4(%esp)
- pop %esi
- pop %edx
- pop %ecx
- pop %ebx
- ret
-
-.Lstrstr:
- push %ecx
- push %edx
- push %esi
- push %edi
- xor %eax,%eax
- xor %ecx,%ecx
- not %ecx
- mov 16+4(%esp),%esi
- mov 16+8(%esp),%edi
- repne scasb
- not %ecx
- dec %ecx
- mov %ecx,%edx
-1: mov 16+8(%esp),%edi
- mov %esi,%eax
- mov %edx,%ecx
- repe cmpsb
- je 2f
- xchg %eax,%esi
- inc %esi
- cmpb $0,-1(%eax)
- jne 1b
- xor %eax,%eax
-2: pop %edi
- pop %esi
- pop %edx
- pop %ecx
- ret
-
-.Lstr_prefix:
- push %esi
- push %edi
- mov 8+4(%esp),%esi /* 1st arg is prefix string */
- mov 8+8(%esp),%edi /* 2nd arg is main string */
-1: lodsb
- test %al,%al
- jz 2f
- scasb
- je 1b
- sbb %eax,%eax
- or $1,%al
- jmp 3f
-2: xor %eax,%eax
-3: pop %edi
- pop %esi
- ret
-
-.Lstrlen:
- push %ecx
- push %esi
- push %edi
- xor %eax,%eax
- xor %ecx,%ecx
- not %ecx
- mov 12+4(%esp),%edi
- repne scasb
- not %ecx
- dec %ecx
- mov %ecx,%eax
- pop %edi
- pop %esi
- pop %ecx
- ret
-
-.Lfind_option:
- mov 4(%esp),%eax
- dec %eax
- push %ebx
-1: pushl 4+8(%esp)
- inc %eax
- push %eax
- call .Lstrstr
- add $8,%esp
- test %eax,%eax
- jz 3f
- cmp %eax,4+4(%esp)
- je 2f
- cmpb $' ',-1(%eax)
- jne 1b
-2: mov %eax,%ebx
- pushl 4+8(%esp)
- call .Lstrlen
- add $4,%esp
- xadd %eax,%ebx
- /* NUL check (as $'\0' == 0x30 in GAS) */
- cmpb $0,(%ebx)
- je 3f
- cmpb $' ',(%ebx)
- je 3f
- cmpb $'=',(%ebx)
- jne 1b
-3: pop %ebx
- ret
-
-cmdline_parse_early:
- pusha
-
- /* Bail if there is no command line to parse. */
- mov sym_phys(multiboot_ptr),%ebx
- mov MB_flags(%ebx),%eax
- test $4,%al
- jz .Lcmdline_exit
- mov MB_cmdline(%ebx),%eax
- test %eax,%eax
- jz .Lcmdline_exit
-
- /* Check for 'no-real-mode' command-line option. */
- pushl $sym_phys(.Lno_rm_opt)
- pushl MB_cmdline(%ebx)
- call .Lfind_option
- test %eax,%eax
- setnz %al
- or %al,sym_phys(skip_realmode)
-
- /* Check for 'tboot=' command-line option. */
- movl $sym_phys(.Ltboot_opt),4(%esp)
- call .Lfind_option
- test %eax,%eax
- setnz %al
- or %al,sym_phys(skip_realmode) /* tboot= implies no-real-mode */
-
-.Lparse_edd:
- /* Check for 'edd=' command-line option. */
- movl $sym_phys(.Ledd_opt),4(%esp)
- call .Lfind_option
- test %eax,%eax
- jz .Lparse_edid
- cmpb $'=',3(%eax)
- jne .Lparse_edid
- add $4,%eax
- movb $2,sym_phys(opt_edd) /* opt_edd=2: edd=off */
- cmpw $0x666f,(%eax) /* 0x666f == "of" */
- je .Lparse_edid
- decb sym_phys(opt_edd) /* opt_edd=1: edd=skipmbr */
- cmpw $0x6b73,(%eax) /* 0x6b73 == "sk" */
- je .Lparse_edid
- decb sym_phys(opt_edd) /* opt_edd=0: edd=on (default) */
-
-.Lparse_edid:
- /* Check for 'edid=' command-line option. */
- movl $sym_phys(.Ledid_opt),4(%esp)
- call .Lfind_option
- test %eax,%eax
- jz .Lparse_vga
- cmpb $'=',4(%eax)
- jne .Lparse_vga
- add $5,%eax
- mov %eax,%ebx
- push %ebx
- pushl $sym_phys(.Ledid_force)
- call .Lstr_prefix
- add $8,%esp
- movb $2,sym_phys(opt_edid) /* opt_edid=2: edid=force */
- test %eax,%eax
- jz .Lparse_vga
- push %ebx
- pushl $sym_phys(.Ledid_no)
- call .Lstr_prefix
- add $8,%esp
- decb sym_phys(opt_edid) /* opt_edid=1: edid=no */
- test %eax,%eax
- jz .Lparse_vga
- decb sym_phys(opt_edid) /* opt_edid=0: default */
-
-.Lparse_vga:
- /* Check for 'vga=' command-line option. */
- movl $sym_phys(.Lvga_opt),4(%esp)
- call .Lfind_option
- add $8,%esp
- test %eax,%eax
- jz .Lcmdline_exit
- cmpb $'=',3(%eax)
- jne .Lcmdline_exit
- add $4,%eax
-
- /* Found the 'vga=' option. Default option is to display vga menu. */
- movw $ASK_VGA,sym_phys(boot_vid_mode)
-
- /* Check for 'vga=text-80x<rows>. */
- mov %eax,%ebx
- push %ebx
- pushl $sym_phys(.Lvga_text80)
- call .Lstr_prefix
- add $8,%esp
- test %eax,%eax
- jnz .Lparse_vga_gfx
-
- /* We have 'vga=text-80x<rows>'. */
- add $8,%ebx
- push %ebx
- call .Latoi
- add $4,%esp
- mov %ax,%bx
- lea sym_phys(.Lvga_text_modes),%esi
-1: lodsw
- test %ax,%ax
- jz .Lcmdline_exit
- cmp %ax,%bx
- lodsw
- jne 1b
- mov %ax,sym_phys(boot_vid_mode)
- jmp .Lcmdline_exit
-
-.Lparse_vga_gfx:
- /* Check for 'vga=gfx-<width>x<height>x<depth>'. */
- push %ebx
- pushl $sym_phys(.Lvga_gfx)
- call .Lstr_prefix
- add $8,%esp
- test %eax,%eax
- jnz .Lparse_vga_mode
-
- /* We have 'vga=gfx-<width>x<height>x<depth>'. */
- /* skip 'gfx-' */
- add $4,%ebx
- /* parse <width> */
- push %ebx
- call .Latoi
- pop %esi
- mov %ax,sym_phys(vesa_size)+0
- /* skip 'x' */
- lodsb
- cmpb $'x',%al
- jne .Lcmdline_exit
- /* parse <height> */
- push %esi
- call .Latoi
- pop %esi
- mov %ax,sym_phys(vesa_size)+2
- /* skip 'x' */
- lodsb
- cmpb $'x',%al
- jne .Lcmdline_exit
- /* parse <depth> */
- push %esi
- call .Latoi
- pop %esi
- mov %ax,sym_phys(vesa_size)+4
- /* commit to vesa mode */
- movw $VIDEO_VESA_BY_SIZE,sym_phys(boot_vid_mode)
- jmp .Lcmdline_exit
-
-.Lparse_vga_mode:
- /* Check for 'vga=mode-<mode>'. */
- push %ebx
- pushl $sym_phys(.Lvga_mode)
- call .Lstr_prefix
- add $8,%esp
- test %eax,%eax
- jnz .Lparse_vga_current
-
- /* We have 'vga=mode-<mode>'. */
- add $5,%ebx
- push %ebx
- call .Latoi
- add $4,%esp
- mov %ax,sym_phys(boot_vid_mode)
- jmp .Lcmdline_exit
-
-.Lparse_vga_current:
- /* Check for 'vga=current'. */
- push %ebx
- pushl $sym_phys(.Lvga_current)
- call .Lstr_prefix
- add $8,%esp
- test %eax,%eax
- jnz .Lcmdline_exit
-
- /* We have 'vga=current'. */
- movw $VIDEO_CURRENT_MODE,sym_phys(boot_vid_mode)
-
-.Lcmdline_exit:
- popa
- ret
-
- .pushsection .init.rodata, "a", @progbits
-
-.Lvga_text_modes: /* rows, mode_number */
- .word 25,VIDEO_80x25
- .word 50,VIDEO_80x50
- .word 43,VIDEO_80x43
- .word 28,VIDEO_80x28
- .word 30,VIDEO_80x30
- .word 34,VIDEO_80x34
- .word 60,VIDEO_80x60
- .word 0
-
-.Lvga_opt:
- .asciz "vga"
-.Lvga_text80:
- .asciz "text-80x"
-.Lvga_gfx:
- .asciz "gfx-"
-.Lvga_mode:
- .asciz "mode-"
-.Lvga_current:
- .asciz "current"
-.Lno_rm_opt:
- .asciz "no-real-mode"
-.Ltboot_opt:
- .asciz "tboot"
-.Ledid_opt:
- .asciz "edid"
-.Ledid_force:
- .asciz "force"
-.Ledid_no:
- .asciz "no"
-.Ledd_opt:
- .asciz "edd"
-
- .popsection
diff --git a/xen/arch/x86/boot/cmdline.c b/xen/arch/x86/boot/cmdline.c
new file mode 100644
index 0000000..06aa064
--- /dev/null
+++ b/xen/arch/x86/boot/cmdline.c
@@ -0,0 +1,340 @@
+/*
+ * Copyright (c) 2015, 2016 Oracle and/or its affiliates. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * strlen(), strncmp(), strchr(), strspn() and strcspn() were copied from
+ * Linux kernel source (linux/lib/string.c).
+ */
+
+/*
+ * This entry point is entered from xen/arch/x86/boot/head.S with:
+ * - 0x4(%esp) = &cmdline,
+ * - 0x8(%esp) = &early_boot_opts.
+ */
+asm (
+ " .text \n"
+ " .globl _start \n"
+ "_start: \n"
+ " jmp cmdline_parse_early \n"
+ );
+
+#include "defs.h"
+#include "video.h"
+
+/* Keep in sync with trampoline.S:early_boot_opts label! */
+typedef struct __packed {
+ u8 skip_realmode;
+ u8 opt_edd;
+ u8 opt_edid;
+ u8 padding;
+ u16 boot_vid_mode;
+ u16 vesa_width;
+ u16 vesa_height;
+ u16 vesa_depth;
+} early_boot_opts_t;
+
+/*
+ * Space and TAB are obvious delimiters. However, I am
+ * adding "\n" and "\r" here too. Just in case when
+ * crazy bootloader/user puts them somewhere.
+ */
+static const char delim_chars_comma[] = ", \n\r\t";
+
+#define delim_chars (delim_chars_comma + 1)
+
+static size_t strlen(const char *s)
+{
+ const char *sc;
+
+ for ( sc = s; *sc != '\0'; ++sc )
+ /* nothing */;
+ return sc - s;
+}
+
+static int strncmp(const char *cs, const char *ct, size_t count)
+{
+ unsigned char c1, c2;
+
+ while ( count )
+ {
+ c1 = *cs++;
+ c2 = *ct++;
+ if ( c1 != c2 )
+ return c1 < c2 ? -1 : 1;
+ if ( !c1 )
+ break;
+ count--;
+ }
+ return 0;
+}
+
+static char *strchr(const char *s, int c)
+{
+ for ( ; *s != (char)c; ++s )
+ if ( *s == '\0' )
+ return NULL;
+ return (char *)s;
+}
+
+static size_t strspn(const char *s, const char *accept)
+{
+ const char *p;
+ const char *a;
+ size_t count = 0;
+
+ for ( p = s; *p != '\0'; ++p )
+ {
+ for ( a = accept; *a != '\0'; ++a )
+ {
+ if ( *p == *a )
+ break;
+ }
+ if ( *a == '\0' )
+ return count;
+ ++count;
+ }
+ return count;
+}
+
+static size_t strcspn(const char *s, const char *reject)
+{
+ const char *p;
+ const char *r;
+ size_t count = 0;
+
+ for ( p = s; *p != '\0'; ++p )
+ {
+ for ( r = reject; *r != '\0'; ++r )
+ {
+ if ( *p == *r )
+ return count;
+ }
+ ++count;
+ }
+ return count;
+}
+
+static unsigned int strtoui(const char *s, const char *stop, const char **next)
+{
+ char base = 10, l;
+ unsigned long long res = 0;
+
+ if ( *s == '0' )
+ base = (tolower(*++s) == 'x') ? (++s, 16) : 8;
+
+ for ( ; *s != '\0'; ++s )
+ {
+ if ( stop && strchr(stop, *s) )
+ goto out;
+
+ if ( *s < '0' || (*s > '7' && base == 8) )
+ {
+ res = UINT_MAX;
+ goto out;
+ }
+
+ l = tolower(*s);
+
+ if ( *s > '9' && (base != 16 || l < 'a' || l > 'f') )
+ {
+ res = UINT_MAX;
+ goto out;
+ }
+
+ res *= base;
+ res += (l >= 'a') ? (l - 'a' + 10) : (*s - '0');
+
+ if ( res >= UINT_MAX )
+ {
+ res = UINT_MAX;
+ goto out;
+ }
+ }
+
+ out:
+ if ( next )
+ *next = s;
+
+ return res;
+}
+
+static int strmaxcmp(const char *cs, const char *ct, const char *_delim_chars)
+{
+ return strncmp(cs, ct, max(strcspn(cs, _delim_chars), strlen(ct)));
+}
+
+static int strsubcmp(const char *cs, const char *ct)
+{
+ return strncmp(cs, ct, strlen(ct));
+}
+
+static const char *find_opt(const char *cmdline, const char *opt, bool arg)
+{
+ size_t lc, lo;
+
+ lo = strlen(opt);
+
+ for ( ; ; )
+ {
+ cmdline += strspn(cmdline, delim_chars);
+
+ if ( *cmdline == '\0' )
+ return NULL;
+
+ if ( !strmaxcmp(cmdline, "--", delim_chars) )
+ return NULL;
+
+ lc = strcspn(cmdline, delim_chars);
+
+ if ( !strncmp(cmdline, opt, arg ? lo : max(lc, lo)) )
+ return cmdline + lo;
+
+ cmdline += lc;
+ }
+}
+
+static bool skip_realmode(const char *cmdline)
+{
+ return find_opt(cmdline, "no-real-mode", false) || find_opt(cmdline, "tboot=", true);
+}
+
+static u8 edd_parse(const char *cmdline)
+{
+ const char *c;
+
+ c = find_opt(cmdline, "edd=", true);
+
+ if ( !c )
+ return 0;
+
+ if ( !strmaxcmp(c, "off", delim_chars) )
+ return 2;
+
+ return !strmaxcmp(c, "skipmbr", delim_chars);
+}
+
+static u8 edid_parse(const char *cmdline)
+{
+ const char *c;
+
+ c = find_opt(cmdline, "edid=", true);
+
+ if ( !c )
+ return 0;
+
+ if ( !strmaxcmp(c, "force", delim_chars) )
+ return 2;
+
+ return !strmaxcmp(c, "no", delim_chars);
+}
+
+static u16 rows2vmode(unsigned int rows)
+{
+ switch ( rows )
+ {
+ case 25:
+ return VIDEO_80x25;
+
+ case 28:
+ return VIDEO_80x28;
+
+ case 30:
+ return VIDEO_80x30;
+
+ case 34:
+ return VIDEO_80x34;
+
+ case 43:
+ return VIDEO_80x43;
+
+ case 50:
+ return VIDEO_80x50;
+
+ case 60:
+ return VIDEO_80x60;
+
+ default:
+ return ASK_VGA;
+ }
+}
+
+static void vga_parse(const char *cmdline, early_boot_opts_t *ebo)
+{
+ const char *c;
+ unsigned int tmp, vesa_depth, vesa_height, vesa_width;
+
+ c = find_opt(cmdline, "vga=", true);
+
+ if ( !c )
+ return;
+
+ ebo->boot_vid_mode = ASK_VGA;
+
+ if ( !strmaxcmp(c, "current", delim_chars_comma) )
+ ebo->boot_vid_mode = VIDEO_CURRENT_MODE;
+ else if ( !strsubcmp(c, "text-80x") )
+ {
+ c += strlen("text-80x");
+ ebo->boot_vid_mode = rows2vmode(strtoui(c, delim_chars_comma, NULL));
+ }
+ else if ( !strsubcmp(c, "gfx-") )
+ {
+ vesa_width = strtoui(c + strlen("gfx-"), "x", &c);
+
+ if ( vesa_width > U16_MAX )
+ return;
+
+ /*
+ * Increment c outside of strtoui() because otherwise some
+ * compiler may complain with following message:
+ * warning: operation on 'c' may be undefined.
+ */
+ ++c;
+ vesa_height = strtoui(c, "x", &c);
+
+ if ( vesa_height > U16_MAX )
+ return;
+
+ vesa_depth = strtoui(++c, delim_chars_comma, NULL);
+
+ if ( vesa_depth > U16_MAX )
+ return;
+
+ ebo->vesa_width = vesa_width;
+ ebo->vesa_height = vesa_height;
+ ebo->vesa_depth = vesa_depth;
+ ebo->boot_vid_mode = VIDEO_VESA_BY_SIZE;
+ }
+ else if ( !strsubcmp(c, "mode-") )
+ {
+ tmp = strtoui(c + strlen("mode-"), delim_chars_comma, NULL);
+
+ if ( tmp > U16_MAX )
+ return;
+
+ ebo->boot_vid_mode = tmp;
+ }
+}
+
+void __stdcall cmdline_parse_early(const char *cmdline, early_boot_opts_t *ebo)
+{
+ if ( !cmdline )
+ return;
+
+ ebo->skip_realmode = skip_realmode(cmdline);
+ ebo->opt_edd = edd_parse(cmdline);
+ ebo->opt_edid = edid_parse(cmdline);
+ vga_parse(cmdline, ebo);
+}
diff --git a/xen/arch/x86/boot/defs.h b/xen/arch/x86/boot/defs.h
new file mode 100644
index 0000000..6abdc15
--- /dev/null
+++ b/xen/arch/x86/boot/defs.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2016 Oracle and/or its affiliates. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * max() was copied from xen/xen/include/xen/kernel.h.
+ */
+
+#ifndef __BOOT_DEFS_H__
+#define __BOOT_DEFS_H__
+
+#include "../../../include/xen/stdbool.h"
+
+#define __packed __attribute__((__packed__))
+#define __stdcall __attribute__((__stdcall__))
+
+#define NULL ((void *)0)
+
+#define ALIGN_UP(arg, align) \
+ (((arg) + (align) - 1) & ~((typeof(arg))(align) - 1))
+
+#define min(x,y) ({ \
+ const typeof(x) _x = (x); \
+ const typeof(y) _y = (y); \
+ (void) (&_x == &_y); \
+ _x < _y ? _x : _y; })
+
+#define max(x,y) ({ \
+ const typeof(x) _x = (x); \
+ const typeof(y) _y = (y); \
+ (void) (&_x == &_y); \
+ _x > _y ? _x : _y; })
+
+#define _p(val) ((void *)(unsigned long)(val))
+
+#define tolower(c) ((c) | 0x20)
+
+typedef unsigned char u8;
+typedef unsigned short u16;
+typedef unsigned int u32;
+typedef unsigned long long u64;
+typedef unsigned int size_t;
+
+#define U16_MAX ((u16)(~0U))
+#define UINT_MAX (~0U)
+
+#endif /* __BOOT_DEFS_H__ */
diff --git a/xen/arch/x86/boot/edd.S b/xen/arch/x86/boot/edd.S
index 5c80da6..73371f9 100644
--- a/xen/arch/x86/boot/edd.S
+++ b/xen/arch/x86/boot/edd.S
@@ -142,9 +142,6 @@ edd_next:
edd_done:
ret
-opt_edd:
- .byte 0 # edd=on/off/skipmbr
-
GLOBAL(boot_edd_info_nr)
.byte 0
GLOBAL(boot_mbr_signature_nr)
diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index 3c4b1e2..bda7248 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -511,6 +511,13 @@ trampoline_setup:
cmpb $0,sym_phys(skip_realmode)
jnz 1f
+ /* Bail if there is no command line to parse. */
+ mov sym_phys(multiboot_ptr),%ebx
+ testl $MBI_CMDLINE,MB_flags(%ebx)
+ jz 1f
+
+ pushl $sym_phys(early_boot_opts)
+ pushl MB_cmdline(%ebx)
call cmdline_parse_early
1:
@@ -529,6 +536,7 @@ trampoline_setup:
/* Jump into the relocated trampoline. */
lret
+cmdline_parse_early:
#include "cmdline.S"
reloc:
diff --git a/xen/arch/x86/boot/reloc.c b/xen/arch/x86/boot/reloc.c
index b22bf1e..0f2e372 100644
--- a/xen/arch/x86/boot/reloc.c
+++ b/xen/arch/x86/boot/reloc.c
@@ -25,21 +25,10 @@ asm (
" jmp reloc \n"
);
-typedef unsigned int u32;
-typedef unsigned long long u64;
-
+#include "defs.h"
#include "../../../include/xen/multiboot.h"
#include "../../../include/xen/multiboot2.h"
-#define NULL ((void *)0)
-
-#define __stdcall __attribute__((__stdcall__))
-
-#define ALIGN_UP(arg, align) \
- (((arg) + (align) - 1) & ~((typeof(arg))(align) - 1))
-
-#define _p(val) ((void *)(unsigned long)(val))
-
#define get_mb2_data(tag, type, member) (((multiboot2_tag_##type##_t *)(tag))->member)
#define get_mb2_string(tag, type, member) ((u32)get_mb2_data(tag, type, member))
diff --git a/xen/arch/x86/boot/trampoline.S b/xen/arch/x86/boot/trampoline.S
index b013614..2715d17 100644
--- a/xen/arch/x86/boot/trampoline.S
+++ b/xen/arch/x86/boot/trampoline.S
@@ -220,8 +220,23 @@ trampoline_boot_cpu_entry:
/* Jump to the common bootstrap entry point. */
jmp trampoline_protmode_entry
+#include "video.h"
+
+ .align 2
+/* Keep in sync with cmdline.c:early_boot_opts_t type! */
+early_boot_opts:
skip_realmode:
.byte 0
+opt_edd:
+ .byte 0 /* edd=on/off/skipmbr */
+opt_edid:
+ .byte 0 /* EDID parsing option (force/no/default). */
+/* Padding. */
+ .byte 0
+GLOBAL(boot_vid_mode)
+ .word VIDEO_80x25 /* If we don't run at all, assume basic video mode 3 at 80x25. */
+vesa_size:
+ .word 0,0,0 /* width x depth x height */
GLOBAL(kbd_shift_flags)
.byte 0
diff --git a/xen/arch/x86/boot/video.S b/xen/arch/x86/boot/video.S
index 2aafbeb..335a51c 100644
--- a/xen/arch/x86/boot/video.S
+++ b/xen/arch/x86/boot/video.S
@@ -945,7 +945,6 @@ store_edid:
#endif
ret
-opt_edid: .byte 0 # EDID parsing option (force/no/default)
mt_end: .word 0 # End of video mode table if built
edit_buf: .space 6 # Line editor buffer
card_name: .word 0 # Pointer to adapter name
@@ -991,12 +990,6 @@ name_bann: .asciz "Video adapter: "
force_size: .word 0 # Use this size instead of the one in BIOS vars
-vesa_size: .word 0,0,0 # width x depth x height
-
-/* If we don't run at all, assume basic video mode 3 at 80x25. */
- .align 2
-GLOBAL(boot_vid_mode)
- .word VIDEO_80x25
GLOBAL(boot_vid_info)
.byte 0, 0 /* orig_x, orig_y */
.byte 3 /* text mode 3 */
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 09/13] x86: change default load address from 1 MiB to 2 MiB
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
` (7 preceding siblings ...)
2016-09-28 22:51 ` [PATCH v8 08/13] x86/boot: implement early command line parser in C Daniel Kiper
@ 2016-09-28 22:51 ` Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 10/13] x86/setup: use XEN_IMG_OFFSET instead of Daniel Kiper
` (3 subsequent siblings)
12 siblings, 0 replies; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
Subsequent patches introducing relocatable early boot code play with
page tables using 2 MiB huge pages. If load address is not aligned at
2 MiB then code touching such page tables must have special cases for
start and end of Xen image memory region. So, let's make life easier
and move default load address from 1 MiB to 2 MiB. This way page table
code will be nice and easy. Hence, there is a chance that it will be
less error prone too... :-)))
Additionally, drop first 2 MiB mapping from Xen image mapping.
It is no longer needed.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
---
v8 - suggestions/fixes:
- drop first 2 MiB mapping from Xen image mapping
(suggested by Jan Beulich),
- improve commit message.
v7 - suggestions/fixes:
- minor cleanups
(suggested by Jan Beulich).
---
xen/arch/x86/Makefile | 2 +-
xen/arch/x86/Rules.mk | 3 +++
xen/arch/x86/boot/head.S | 8 --------
xen/arch/x86/boot/x86_64.S | 5 +++--
xen/arch/x86/setup.c | 3 ++-
xen/arch/x86/xen.lds.S | 2 +-
6 files changed, 10 insertions(+), 13 deletions(-)
diff --git a/xen/arch/x86/Makefile b/xen/arch/x86/Makefile
index 8b68c06..b3c4a40 100644
--- a/xen/arch/x86/Makefile
+++ b/xen/arch/x86/Makefile
@@ -90,7 +90,7 @@ all_symbols =
endif
$(TARGET): $(TARGET)-syms $(efi-y) boot/mkelf32
- ./boot/mkelf32 $(notes_phdrs) $(TARGET)-syms $(TARGET) 0x100000 \
+ ./boot/mkelf32 $(notes_phdrs) $(TARGET)-syms $(TARGET) $(XEN_IMG_OFFSET) \
`$(NM) $(TARGET)-syms | sed -ne 's/^\([^ ]*\) . _end$$/0x\1/p'`
ALL_OBJS := $(BASEDIR)/arch/x86/boot/built_in.o $(BASEDIR)/arch/x86/efi/built_in.o $(ALL_OBJS)
diff --git a/xen/arch/x86/Rules.mk b/xen/arch/x86/Rules.mk
index 42be4bc..36e6386 100644
--- a/xen/arch/x86/Rules.mk
+++ b/xen/arch/x86/Rules.mk
@@ -1,9 +1,12 @@
########################################
# x86-specific definitions
+XEN_IMG_OFFSET := 0x200000
+
CFLAGS += -I$(BASEDIR)/include
CFLAGS += -I$(BASEDIR)/include/asm-x86/mach-generic
CFLAGS += -I$(BASEDIR)/include/asm-x86/mach-default
+CFLAGS += -DXEN_IMG_OFFSET=$(XEN_IMG_OFFSET)
CFLAGS += '-D__OBJECT_LABEL__=$(subst /,$$,$(subst -,_,$(subst $(BASEDIR)/,,$(CURDIR))/$@))'
# Prevent floating-point variables from creeping into Xen.
diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index bda7248..1de4f1a 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -479,14 +479,6 @@ trampoline_setup:
mov %eax,sym_phys(boot_tsc_stamp)
mov %edx,sym_phys(boot_tsc_stamp+4)
- /*
- * During boot, hook 4kB mappings of first 2MB of memory into L2.
- * This avoids mixing cachability for the legacy VGA region, and is
- * corrected when Xen relocates itself.
- */
- mov $sym_phys(l1_identmap)+__PAGE_HYPERVISOR,%edi
- mov %edi,sym_phys(l2_xenmap)
-
/* Apply relocations to bootstrap trampoline. */
mov sym_phys(trampoline_phys),%edx
mov $sym_phys(__trampoline_rel_start),%edi
diff --git a/xen/arch/x86/boot/x86_64.S b/xen/arch/x86/boot/x86_64.S
index 139b2ca..7890374 100644
--- a/xen/arch/x86/boot/x86_64.S
+++ b/xen/arch/x86/boot/x86_64.S
@@ -121,8 +121,9 @@ GLOBAL(l2_identmap)
* page.
*/
GLOBAL(l2_xenmap)
- idx = 0
- .rept 8
+ .quad 0
+ idx = 1
+ .rept 7
.quad sym_phys(__image_base__) + (idx << L2_PAGETABLE_SHIFT) + (PAGE_HYPERVISOR | _PAGE_PSE)
idx = idx + 1
.endr
diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index 5b17783..f19af6e 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -957,7 +957,8 @@ void __init noreturn __start_xen(unsigned long mbi_p)
* Undo the temporary-hooking of the l1_identmap. __2M_text_start
* is contained in this PTE.
*/
- BUG_ON(l2_table_offset((unsigned long)_erodata) ==
+ BUG_ON(using_2M_mapping() &&
+ l2_table_offset((unsigned long)_erodata) ==
l2_table_offset((unsigned long)_stext));
*pl2e++ = l2e_from_pfn(xen_phys_start >> PAGE_SHIFT,
PAGE_HYPERVISOR_RX | _PAGE_PSE);
diff --git a/xen/arch/x86/xen.lds.S b/xen/arch/x86/xen.lds.S
index e0e2529..45251fd 100644
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -55,7 +55,7 @@ SECTIONS
__2M_text_start = .; /* Start of 2M superpages, mapped RX. */
#endif
- . = __XEN_VIRT_START + MB(1);
+ . = __XEN_VIRT_START + XEN_IMG_OFFSET;
_start = .;
.text : {
_stext = .; /* Text and read-only data */
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 10/13] x86/setup: use XEN_IMG_OFFSET instead of...
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
` (8 preceding siblings ...)
2016-09-28 22:51 ` [PATCH v8 09/13] x86: change default load address from 1 MiB to 2 MiB Daniel Kiper
@ 2016-09-28 22:51 ` Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 11/13] x86: make Xen early boot code relocatable Daniel Kiper
` (2 subsequent siblings)
12 siblings, 0 replies; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
..calculating its value during runtime.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
---
xen/arch/x86/setup.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index f19af6e..ca1a97a 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -901,7 +901,6 @@ void __init noreturn __start_xen(unsigned long mbi_p)
l4_pgentry_t *pl4e;
l3_pgentry_t *pl3e;
l2_pgentry_t *pl2e;
- uint64_t load_start;
int i, j, k;
/* Select relocation address. */
@@ -915,9 +914,8 @@ void __init noreturn __start_xen(unsigned long mbi_p)
* with a barrier(). After this we must *not* modify static/global
* data until after we have switched to the relocated pagetables!
*/
- load_start = (unsigned long)_start - XEN_VIRT_START;
barrier();
- move_memory(e + load_start, load_start, _end - _start, 1);
+ move_memory(e + XEN_IMG_OFFSET, XEN_IMG_OFFSET, _end - _start, 1);
/* Walk initial pagetables, relocating page directory entries. */
pl4e = __va(__pa(idle_pg_table));
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 11/13] x86: make Xen early boot code relocatable
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
` (9 preceding siblings ...)
2016-09-28 22:51 ` [PATCH v8 10/13] x86/setup: use XEN_IMG_OFFSET instead of Daniel Kiper
@ 2016-09-28 22:51 ` Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 12/13] x86/boot: rename sym_phys() to sym_offs() Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 13/13] x86: add multiboot2 protocol support for relocatable images Daniel Kiper
12 siblings, 0 replies; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
Every multiboot protocol (regardless of version) compatible image must
specify its load address (in ELF or multiboot header). Multiboot protocol
compatible loader have to load image at specified address. However, there
is no guarantee that the requested memory region (in case of Xen it starts
at 2 MiB and ends at ~5 MiB) where image should be loaded initially is a RAM
and it is free (legacy BIOS platforms are merciful for Xen but I found at
least one EFI platform on which Xen load address conflicts with EFI boot
services; it is Dell PowerEdge R820 with latest firmware). To cope with that
problem we must make Xen early boot code relocatable and help boot loader to
relocate image in proper way by suggesting, not requesting specific load
addresses as it is right now, allowed address ranges. This patch does former.
It does not add multiboot2 protocol interface which is done in "x86: add
multiboot2 protocol support for relocatable images" patch.
This patch changes following things:
- %esi and %r15d registers are used as a storage for Xen image load base
address (%r15d shortly because %rsi is used for EFI SystemTable address
in 64-bit code); both registers are (%esi is mostly) unused in early
boot code and preserved during C functions calls (%esi in 32-bit code
and %r15d in 64-bit code),
- %fs is used as base for Xen data relative addressing in 32-bit code
if it is possible; %esi is used for that thing during error printing
because it is not always possible to properly and efficiently
initialize %fs.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
---
v8 - suggestions/fixes:
- use shld instead of mov and shr in BOOT_FS segment
descriptor base address initialization
(suggested by Jan Beulich),
- simplify code updating frame addresses in page tables
(suggested by Jan Beulich),
- print Xen image base addresses using "%#lx" format
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich).
v6 - suggestions/fixes:
- leave static mapping of first
16 MiB in l2_identmap as is
(suggested by Jan Beulich),
- use xen_phys_start instead of xen_img_load_base_addr
(suggested by Daniel Kiper and Jan Beulich),
- simplify BOOT_FS segment descriptor
base address initialization
(suggested by Jan Beulich),
- fix BOOT_FS segment limit
(suggested by Jan Beulich),
- do not rename sym_phys in this patch
(suggested by Jan Beulich),
- rename esi_offset/fs_offset to
sym_esi/sym_fs respectively
(suggested by Jan Beulich),
- use add instead of lea in assembly
error printing code
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich),
- improve commit message
(suggested by Jan Beulich),
- various minor cleanups and fixes
(suggested by Jan Beulich).
v4 - suggestions/fixes:
- do not relocate Xen image if boot loader did work for us
(suggested by Andrew Cooper and Jan Beulich),
- initialize xen_img_load_base_addr in EFI boot code too,
- properly initialize trampoline_xen_phys_start,
- calculate Xen image load base address in
x86_64 code ourselves,
(suggested by Jan Beulich),
- change how and when Xen image base address is printed,
- use %fs instead of %esi for relative addressing
(suggested by Andrew Cooper and Jan Beulich),
- create esi_offset and fs_offset() macros in assembly,
- calculate <final-exec-addr> mkelf32 argument automatically,
- optimize and cleanup code,
- improve comments,
- improve commit message.
v3 - suggestions/fixes:
- improve segment registers initialization
(suggested by Jan Beulich),
- simplify Xen image load base address calculation
(suggested by Jan Beulich),
- use %esi and %r15d instead of %ebp to store
Xen image load base address,
- use %esi instead of %fs for relative addressing;
this way we get shorter and simpler code,
- rename some variables and constants
(suggested by Jan Beulich),
- improve comments
(suggested by Konrad Rzeszutek Wilk),
- improve commit message
(suggested by Jan Beulich).
---
xen/arch/x86/boot/head.S | 161 +++++++++++++++++++++++++++++--------
xen/arch/x86/boot/trampoline.S | 5 ++
xen/arch/x86/boot/x86_64.S | 21 +++--
xen/arch/x86/setup.c | 14 ++--
xen/arch/x86/x86_64/asm-offsets.c | 3 +
xen/include/asm-x86/page.h | 2 +-
6 files changed, 156 insertions(+), 50 deletions(-)
diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index 1de4f1a..ce25a5e 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -13,12 +13,15 @@
.code32
#define sym_phys(sym) ((sym) - __XEN_VIRT_START)
+#define sym_esi(sym) sym_phys(sym)(%esi)
+#define sym_fs(sym) %fs:sym_phys(sym)
#define BOOT_CS32 0x0008
#define BOOT_CS64 0x0010
#define BOOT_DS 0x0018
#define BOOT_PSEUDORM_CS 0x0020
#define BOOT_PSEUDORM_DS 0x0028
+#define BOOT_FS 0x0030
#define MB2_HT(name) (MULTIBOOT2_HEADER_TAG_##name)
#define MB2_TT(name) (MULTIBOOT2_TAG_TYPE_##name)
@@ -105,7 +108,8 @@ multiboot2_header_start:
.word 0
gdt_boot_descr:
- .word 6*8-1
+ .word 7*8-1
+gdt_boot_base:
.long sym_phys(trampoline_gdt)
.long 0 /* Needed for 64-bit lgdt */
@@ -127,27 +131,27 @@ vga_text_buffer:
.section .init.text, "ax", @progbits
bad_cpu:
- mov $(sym_phys(.Lbad_cpu_msg)),%esi # Error message
+ add $sym_phys(.Lbad_cpu_msg),%esi # Error message
jmp .Lget_vtb
not_multiboot:
- mov $(sym_phys(.Lbad_ldr_msg)),%esi # Error message
+ add $sym_phys(.Lbad_ldr_msg),%esi # Error message
jmp .Lget_vtb
.Lmb2_no_st:
- mov $(sym_phys(.Lbad_ldr_nst)),%esi # Error message
+ add $sym_phys(.Lbad_ldr_nst),%esi # Error message
jmp .Lget_vtb
.Lmb2_no_ih:
- mov $(sym_phys(.Lbad_ldr_nih)),%esi # Error message
+ add $sym_phys(.Lbad_ldr_nih),%esi # Error message
jmp .Lget_vtb
.Lmb2_no_bs:
- mov $(sym_phys(.Lbad_ldr_nbs)),%esi # Error message
+ add $sym_phys(.Lbad_ldr_nbs),%esi # Error message
xor %edi,%edi # No VGA text buffer
jmp .Lsend_chr
.Lmb2_efi_ia_32:
- mov $(sym_phys(.Lbad_efi_msg)),%esi # Error message
+ add $sym_phys(.Lbad_efi_msg),%esi # Error message
xor %edi,%edi # No VGA text buffer
jmp .Lsend_chr
.Lget_vtb:
- mov sym_phys(vga_text_buffer),%edi
+ mov sym_esi(vga_text_buffer),%edi
.Lsend_chr:
mov (%esi),%bl
test %bl,%bl # Terminate on '\0' sentinel
@@ -176,6 +180,9 @@ __efi64_start:
/* VGA is not available on EFI platforms. */
movl $0,vga_text_buffer(%rip)
+ /* Load Xen image load base address. */
+ lea __image_base__(%rip),%r15d
+
/* Check for Multiboot2 bootloader. */
cmp $MULTIBOOT2_BOOTLOADER_MAGIC,%eax
je .Lefi_multiboot2_proto
@@ -300,6 +307,9 @@ run_bs:
pop %rax
+ /* Store Xen image load base address in place accessible for 32-bit code. */
+ mov %r15d,%esi
+
/* Jump to trampoline_setup after switching CPU to x86_32 mode. */
lea trampoline_setup(%rip),%edi
@@ -307,9 +317,11 @@ x86_32_switch:
cli
/* Initialize GDTR. */
+ add %esi,gdt_boot_base(%rip)
lgdt gdt_boot_descr(%rip)
/* Reload code selector. */
+ add %esi,cs32_switch_addr(%rip)
ljmpl *cs32_switch_addr(%rip)
.code32
@@ -339,12 +351,8 @@ __start:
cld
cli
- /* Initialise GDT and basic data segments. */
- lgdt %cs:sym_phys(gdt_boot_descr)
- mov $BOOT_DS,%ecx
- mov %ecx,%ds
- mov %ecx,%es
- mov %ecx,%ss
+ /* Load default Xen image load base address. */
+ mov $sym_phys(__image_base__),%esi
/* Bootloaders may set multiboot{1,2}.mem_lower to a nonzero value. */
xor %edx,%edx
@@ -401,6 +409,25 @@ __start:
jmp 0b
trampoline_bios_setup:
+ /*
+ * Called on legacy BIOS platforms only.
+ *
+ * Initialize GDTR and basic data segments.
+ */
+ add %esi,sym_esi(gdt_boot_base)
+ lgdt sym_esi(gdt_boot_descr)
+
+ mov $BOOT_DS,%ecx
+ mov %ecx,%ds
+ mov %ecx,%es
+ mov %ecx,%ss
+ /* %esp is initialized later. */
+
+ /* Load null descriptor to unused segment registers. */
+ xor %ecx,%ecx
+ mov %ecx,%fs
+ mov %ecx,%gs
+
/* Set up trampoline segment 64k below EBDA */
movzwl 0x40e,%ecx /* EBDA segment */
cmp $0xa000,%ecx /* sanity check (high) */
@@ -428,32 +455,64 @@ trampoline_bios_setup:
xor %cl, %cl
trampoline_setup:
+ /*
+ * Called on legacy BIOS and EFI platforms.
+ *
+ * Initialize 0-15 bits of BOOT_FS segment descriptor base address.
+ */
+ mov %si,BOOT_FS+2+sym_esi(trampoline_gdt)
+
+ /* Initialize 16-23 bits of BOOT_FS segment descriptor base address. */
+ shld $16,%esi,%edx
+ mov %dl,BOOT_FS+4+sym_esi(trampoline_gdt)
+
+ /* Initialize 24-31 bits of BOOT_FS segment descriptor base address. */
+ mov %dh,BOOT_FS+7+sym_esi(trampoline_gdt)
+
+ /*
+ * Initialize %fs and later use it to access Xen data if possible.
+ * According to Intel 64 and IA-32 Architectures Software Developer's
+ * Manual it is safe to do that without reloading GDTR before.
+ */
+ mov $BOOT_FS,%edx
+ mov %edx,%fs
+
/* Save trampoline address for later use. */
shl $4, %ecx
- mov %ecx,sym_phys(trampoline_phys)
+ mov %ecx,sym_fs(trampoline_phys)
+
+ /* Save Xen image load base address for later use. */
+ mov %esi,sym_fs(xen_phys_start)
+ mov %esi,sym_fs(trampoline_xen_phys_start)
+
+ /* Setup stack. %ss was initialized earlier. */
+ lea 1024+sym_esi(cpu0_stack),%esp
/* Save the Multiboot info struct (after relocation) for later use. */
- mov $sym_phys(cpu0_stack)+1024,%esp
push %ecx /* Boot trampoline address. */
push %ebx /* Multiboot information address. */
push %eax /* Multiboot magic. */
call reloc
- mov %eax,sym_phys(multiboot_ptr)
+ mov %eax,sym_fs(multiboot_ptr)
/*
* Do not zero BSS on EFI platform here.
* It was initialized earlier.
*/
- cmpb $0,sym_phys(skip_realmode)
+ cmpb $0,sym_fs(skip_realmode)
jnz 1f
/* Initialize BSS (no nasty surprises!). */
mov $sym_phys(__bss_start),%edi
mov $sym_phys(__bss_end),%ecx
+ push %fs
+ pop %es
sub %edi,%ecx
xor %eax,%eax
shr $2,%ecx
rep stosl
+ push %ds
+ pop %es
1:
/* Interrogate CPU extended features via CPUID. */
@@ -467,8 +526,8 @@ trampoline_setup:
jbe 1f
mov $0x80000001,%eax
cpuid
-1: mov %edx,sym_phys(cpuid_ext_features)
- mov %edx,sym_phys(boot_cpu_data)+CPUINFO_FEATURE_OFFSET(X86_FEATURE_LM)
+1: mov %edx,sym_fs(cpuid_ext_features)
+ mov %edx,sym_fs(boot_cpu_data)+CPUINFO_FEATURE_OFFSET(X86_FEATURE_LM)
/* Check for availability of long mode. */
bt $cpufeat_bit(X86_FEATURE_LM),%edx
@@ -476,15 +535,52 @@ trampoline_setup:
/* Stash TSC to calculate a good approximation of time-since-boot */
rdtsc
- mov %eax,sym_phys(boot_tsc_stamp)
- mov %edx,sym_phys(boot_tsc_stamp+4)
+ mov %eax,sym_fs(boot_tsc_stamp)
+ mov %edx,sym_fs(boot_tsc_stamp)+4
+
+ /*
+ * Update frame addresses in page tables excluding l2_identmap
+ * without its first entry which points to l1_identmap.
+ */
+ mov $((__page_tables_end-__page_tables_start)/8),%ecx
+ mov $(((l2_identmap-__page_tables_start)/8)+1),%edx
+1: cmp $((l2_identmap+l2_identmap_sizeof-__page_tables_start)/8),%ecx
+ cmove %edx,%ecx
+ testl $_PAGE_PRESENT,sym_fs(__page_tables_start)-8(,%ecx,8)
+ jz 2f
+ add %esi,sym_fs(__page_tables_start)-8(,%ecx,8)
+2: loop 1b
+
+ /* Initialize L2 boot-map/direct map page table entries (16MB). */
+ lea sym_esi(start),%ebx
+ lea (1<<L2_PAGETABLE_SHIFT)*7+(PAGE_HYPERVISOR|_PAGE_PSE)(%ebx),%eax
+ shr $(L2_PAGETABLE_SHIFT-3),%ebx
+ mov $8,%ecx
+1: mov %eax,sym_fs(l2_bootmap)-8(%ebx,%ecx,8)
+ mov %eax,sym_fs(l2_identmap)-8(%ebx,%ecx,8)
+ sub $(1<<L2_PAGETABLE_SHIFT),%eax
+ loop 1b
+
+ /* Initialize L3 boot-map page directory entry. */
+ lea __PAGE_HYPERVISOR+(L2_PAGETABLE_ENTRIES*8)*3+sym_esi(l2_bootmap),%eax
+ mov $4,%ecx
+1: mov %eax,sym_fs(l3_bootmap)-8(,%ecx,8)
+ sub $(L2_PAGETABLE_ENTRIES*8),%eax
+ loop 1b
+
+ /*
+ * During boot, hook 4kB mappings of first 2MB of memory into L2.
+ * This avoids mixing cachability for the legacy VGA region.
+ */
+ lea __PAGE_HYPERVISOR+sym_esi(l1_identmap),%edi
+ mov %edi,sym_fs(l2_bootmap)
/* Apply relocations to bootstrap trampoline. */
- mov sym_phys(trampoline_phys),%edx
+ mov sym_fs(trampoline_phys),%edx
mov $sym_phys(__trampoline_rel_start),%edi
1:
- mov (%edi),%eax
- add %edx,(%edi,%eax)
+ mov %fs:(%edi),%eax
+ add %edx,%fs:(%edi,%eax)
add $4,%edi
cmp $sym_phys(__trampoline_rel_stop),%edi
jb 1b
@@ -493,28 +589,29 @@ trampoline_setup:
shr $4,%edx
mov $sym_phys(__trampoline_seg_start),%edi
1:
- mov (%edi),%eax
- mov %dx,(%edi,%eax)
+ mov %fs:(%edi),%eax
+ mov %dx,%fs:(%edi,%eax)
add $4,%edi
cmp $sym_phys(__trampoline_seg_stop),%edi
jb 1b
/* Do not parse command line on EFI platform here. */
- cmpb $0,sym_phys(skip_realmode)
+ cmpb $0,sym_fs(skip_realmode)
jnz 1f
/* Bail if there is no command line to parse. */
- mov sym_phys(multiboot_ptr),%ebx
+ mov sym_fs(multiboot_ptr),%ebx
testl $MBI_CMDLINE,MB_flags(%ebx)
jz 1f
- pushl $sym_phys(early_boot_opts)
+ lea sym_esi(early_boot_opts),%eax
+ push %eax
pushl MB_cmdline(%ebx)
call cmdline_parse_early
1:
/* Switch to low-memory stack. */
- mov sym_phys(trampoline_phys),%edi
+ mov sym_fs(trampoline_phys),%edi
lea 0x10000(%edi),%esp
lea trampoline_boot_cpu_entry-trampoline_start(%edi),%eax
pushl $BOOT_CS32
@@ -523,7 +620,7 @@ trampoline_setup:
/* Copy bootstrap trampoline to low memory, below 1MB. */
mov $sym_phys(trampoline_start),%esi
mov $((trampoline_end - trampoline_start) / 4),%ecx
- rep movsl
+ rep movsl %fs:(%esi),%es:(%edi)
/* Jump into the relocated trampoline. */
lret
diff --git a/xen/arch/x86/boot/trampoline.S b/xen/arch/x86/boot/trampoline.S
index 2715d17..64f8efd 100644
--- a/xen/arch/x86/boot/trampoline.S
+++ b/xen/arch/x86/boot/trampoline.S
@@ -54,6 +54,11 @@ trampoline_gdt:
/* 0x0028: real-mode data @ BOOT_TRAMPOLINE */
.long 0x0000ffff
.long 0x00009200
+ /*
+ * 0x0030: ring 0 Xen data, 16 MiB size, base
+ * address is computed during runtime.
+ */
+ .quad 0x00c0920000000fff
.pushsection .trampoline_rel, "a"
.long trampoline_gdt + BOOT_PSEUDORM_CS + 2 - .
diff --git a/xen/arch/x86/boot/x86_64.S b/xen/arch/x86/boot/x86_64.S
index 7890374..7392004 100644
--- a/xen/arch/x86/boot/x86_64.S
+++ b/xen/arch/x86/boot/x86_64.S
@@ -81,7 +81,6 @@ GLOBAL(boot_cpu_compat_gdt_table)
.quad 0x0000910000000000 /* per-CPU entry (limit == cpu) */
.align PAGE_SIZE, 0
-GLOBAL(__page_tables_start)
/*
* Mapping of first 2 megabytes of memory. This is mapped with 4kB mappings
* to avoid type conflicts with fixed-range MTRRs covering the lowest megabyte
@@ -102,6 +101,13 @@ l1_identmap:
.size l1_identmap, . - l1_identmap
/*
+ * __page_tables_start does not cover l1_identmap because it (l1_identmap)
+ * contains 1-1 mappings. This means that frame addresses of these mappings
+ * are static and should not be updated during runtime.
+ */
+GLOBAL(__page_tables_start)
+
+/*
* Space for mapping the first 4GB of memory, with the first 16 megabytes
* actualy mapped (mostly using superpages). Uses 4x 4k pages.
*/
@@ -186,21 +192,14 @@ GLOBAL(idle_pg_table)
GLOBAL(__page_tables_end)
-/* Init pagetables. Enough page directories to map into the bottom 1GB. */
+/* Init pagetables. Enough page directories to map into 4GB. */
.section .init.data, "a", @progbits
.align PAGE_SIZE, 0
GLOBAL(l2_bootmap)
- .quad sym_phys(l1_identmap) + __PAGE_HYPERVISOR
- idx = 1
- .rept 7
- .quad (idx << L2_PAGETABLE_SHIFT) | __PAGE_HYPERVISOR | _PAGE_PSE
- idx = idx + 1
- .endr
- .fill L2_PAGETABLE_ENTRIES - 8, 8, 0
+ .fill 4 * L2_PAGETABLE_ENTRIES, 8, 0
.size l2_bootmap, . - l2_bootmap
GLOBAL(l3_bootmap)
- .quad sym_phys(l2_bootmap) + __PAGE_HYPERVISOR
- .fill L3_PAGETABLE_ENTRIES - 1, 8, 0
+ .fill L3_PAGETABLE_ENTRIES, 8, 0
.size l3_bootmap, . - l3_bootmap
diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index ca1a97a..a24fc36 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -286,9 +286,6 @@ static void *__init bootstrap_map(const module_t *mod)
if ( start >= end )
return NULL;
- if ( end <= BOOTSTRAP_MAP_BASE )
- return (void *)(unsigned long)start;
-
ret = (void *)(map_cur + (unsigned long)(start & mask));
start &= ~mask;
end = (end + mask) & ~mask;
@@ -674,6 +671,8 @@ void __init noreturn __start_xen(unsigned long mbi_p)
printk("Command line: %s\n", cmdline);
+ printk("Xen image load base address: %#lx\n", xen_phys_start);
+
printk("Video information:\n");
/* Print VGA display mode information. */
@@ -931,7 +930,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)
/* Not present, 1GB mapping, or already relocated? */
if ( !(l3e_get_flags(*pl3e) & _PAGE_PRESENT) ||
(l3e_get_flags(*pl3e) & _PAGE_PSE) ||
- (l3e_get_pfn(*pl3e) > 0x1000) )
+ (l3e_get_pfn(*pl3e) > PFN_DOWN(xen_phys_start)) )
continue;
*pl3e = l3e_from_intpte(l3e_get_intpte(*pl3e) +
xen_phys_start);
@@ -941,7 +940,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)
/* Not present, PSE, or already relocated? */
if ( !(l2e_get_flags(*pl2e) & _PAGE_PRESENT) ||
(l2e_get_flags(*pl2e) & _PAGE_PSE) ||
- (l2e_get_pfn(*pl2e) > 0x1000) )
+ (l2e_get_pfn(*pl2e) > PFN_DOWN(xen_phys_start)) )
continue;
*pl2e = l2e_from_intpte(l2e_get_intpte(*pl2e) +
xen_phys_start);
@@ -964,7 +963,8 @@ void __init noreturn __start_xen(unsigned long mbi_p)
{
unsigned int flags;
- if ( !(l2e_get_flags(*pl2e) & _PAGE_PRESENT) )
+ if ( !(l2e_get_flags(*pl2e) & _PAGE_PRESENT) ||
+ (l2e_get_pfn(*pl2e) > PFN_DOWN(xen_phys_start)) )
continue;
if ( !using_2M_mapping() )
@@ -1018,6 +1018,8 @@ void __init noreturn __start_xen(unsigned long mbi_p)
: "memory" );
bootstrap_map(NULL);
+
+ printk("New Xen image base address: %#lx\n", xen_phys_start);
}
/* Is the region suitable for relocating the multiboot modules? */
diff --git a/xen/arch/x86/x86_64/asm-offsets.c b/xen/arch/x86/x86_64/asm-offsets.c
index 2a22659..5d7a8e5 100644
--- a/xen/arch/x86/x86_64/asm-offsets.c
+++ b/xen/arch/x86/x86_64/asm-offsets.c
@@ -179,5 +179,8 @@ void __dummy__(void)
OFFSET(MB2_efi64_ih, multiboot2_tag_efi64_ih_t, pointer);
BLANK();
+ DEFINE(l2_identmap_sizeof, sizeof(l2_identmap));
+ BLANK();
+
OFFSET(DOMAIN_vm_assist, struct domain, vm_assist);
}
diff --git a/xen/include/asm-x86/page.h b/xen/include/asm-x86/page.h
index af7d3e8..a54fdd1 100644
--- a/xen/include/asm-x86/page.h
+++ b/xen/include/asm-x86/page.h
@@ -288,7 +288,7 @@ extern root_pgentry_t idle_pg_table[ROOT_PAGETABLE_ENTRIES];
extern l2_pgentry_t *compat_idle_pg_table_l2;
extern unsigned int m2p_compat_vstart;
extern l2_pgentry_t l2_xenmap[L2_PAGETABLE_ENTRIES],
- l2_bootmap[L2_PAGETABLE_ENTRIES];
+ l2_bootmap[4*L2_PAGETABLE_ENTRIES];
extern l3_pgentry_t l3_bootmap[L3_PAGETABLE_ENTRIES];
extern l2_pgentry_t l2_identmap[4*L2_PAGETABLE_ENTRIES];
extern l1_pgentry_t l1_fixmap[L1_PAGETABLE_ENTRIES];
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 12/13] x86/boot: rename sym_phys() to sym_offs()
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
` (10 preceding siblings ...)
2016-09-28 22:51 ` [PATCH v8 11/13] x86: make Xen early boot code relocatable Daniel Kiper
@ 2016-09-28 22:51 ` Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 13/13] x86: add multiboot2 protocol support for relocatable images Daniel Kiper
12 siblings, 0 replies; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
This way macro name better describes its function.
Currently it is used to calculate symbol offset in
relation to the beginning of Xen image mapping.
However, value returned by sym_offs() for a given
symbol is not always equal its physical address.
There is no functional change.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
---
v8 - suggestions/fixes:
- improve commit message
(suggested by Jan Beulich).
---
xen/arch/x86/boot/head.S | 40 ++++++++++++++++++++--------------------
xen/arch/x86/boot/trampoline.S | 2 +-
xen/arch/x86/boot/wakeup.S | 4 ++--
xen/arch/x86/boot/x86_64.S | 18 +++++++++---------
4 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index ce25a5e..b217c5f 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -12,9 +12,9 @@
.text
.code32
-#define sym_phys(sym) ((sym) - __XEN_VIRT_START)
-#define sym_esi(sym) sym_phys(sym)(%esi)
-#define sym_fs(sym) %fs:sym_phys(sym)
+#define sym_offs(sym) ((sym) - __XEN_VIRT_START)
+#define sym_esi(sym) sym_offs(sym)(%esi)
+#define sym_fs(sym) %fs:sym_offs(sym)
#define BOOT_CS32 0x0008
#define BOOT_CS64 0x0010
@@ -97,7 +97,7 @@ multiboot2_header_start:
/* EFI64 entry point. */
mb2ht_init MB2_HT(ENTRY_ADDRESS_EFI64), MB2_HT(OPTIONAL), \
- sym_phys(__efi64_start)
+ sym_offs(__efi64_start)
/* Multiboot2 header end tag. */
mb2ht_init MB2_HT(END), MB2_HT(REQUIRED)
@@ -110,11 +110,11 @@ multiboot2_header_start:
gdt_boot_descr:
.word 7*8-1
gdt_boot_base:
- .long sym_phys(trampoline_gdt)
+ .long sym_offs(trampoline_gdt)
.long 0 /* Needed for 64-bit lgdt */
cs32_switch_addr:
- .long sym_phys(cs32_switch)
+ .long sym_offs(cs32_switch)
.word BOOT_CS32
.align 4
@@ -131,23 +131,23 @@ vga_text_buffer:
.section .init.text, "ax", @progbits
bad_cpu:
- add $sym_phys(.Lbad_cpu_msg),%esi # Error message
+ add $sym_offs(.Lbad_cpu_msg),%esi # Error message
jmp .Lget_vtb
not_multiboot:
- add $sym_phys(.Lbad_ldr_msg),%esi # Error message
+ add $sym_offs(.Lbad_ldr_msg),%esi # Error message
jmp .Lget_vtb
.Lmb2_no_st:
- add $sym_phys(.Lbad_ldr_nst),%esi # Error message
+ add $sym_offs(.Lbad_ldr_nst),%esi # Error message
jmp .Lget_vtb
.Lmb2_no_ih:
- add $sym_phys(.Lbad_ldr_nih),%esi # Error message
+ add $sym_offs(.Lbad_ldr_nih),%esi # Error message
jmp .Lget_vtb
.Lmb2_no_bs:
- add $sym_phys(.Lbad_ldr_nbs),%esi # Error message
+ add $sym_offs(.Lbad_ldr_nbs),%esi # Error message
xor %edi,%edi # No VGA text buffer
jmp .Lsend_chr
.Lmb2_efi_ia_32:
- add $sym_phys(.Lbad_efi_msg),%esi # Error message
+ add $sym_offs(.Lbad_efi_msg),%esi # Error message
xor %edi,%edi # No VGA text buffer
jmp .Lsend_chr
.Lget_vtb:
@@ -352,7 +352,7 @@ __start:
cli
/* Load default Xen image load base address. */
- mov $sym_phys(__image_base__),%esi
+ mov $sym_offs(__image_base__),%esi
/* Bootloaders may set multiboot{1,2}.mem_lower to a nonzero value. */
xor %edx,%edx
@@ -503,8 +503,8 @@ trampoline_setup:
jnz 1f
/* Initialize BSS (no nasty surprises!). */
- mov $sym_phys(__bss_start),%edi
- mov $sym_phys(__bss_end),%ecx
+ mov $sym_offs(__bss_start),%edi
+ mov $sym_offs(__bss_end),%ecx
push %fs
pop %es
sub %edi,%ecx
@@ -577,22 +577,22 @@ trampoline_setup:
/* Apply relocations to bootstrap trampoline. */
mov sym_fs(trampoline_phys),%edx
- mov $sym_phys(__trampoline_rel_start),%edi
+ mov $sym_offs(__trampoline_rel_start),%edi
1:
mov %fs:(%edi),%eax
add %edx,%fs:(%edi,%eax)
add $4,%edi
- cmp $sym_phys(__trampoline_rel_stop),%edi
+ cmp $sym_offs(__trampoline_rel_stop),%edi
jb 1b
/* Patch in the trampoline segment. */
shr $4,%edx
- mov $sym_phys(__trampoline_seg_start),%edi
+ mov $sym_offs(__trampoline_seg_start),%edi
1:
mov %fs:(%edi),%eax
mov %dx,%fs:(%edi,%eax)
add $4,%edi
- cmp $sym_phys(__trampoline_seg_stop),%edi
+ cmp $sym_offs(__trampoline_seg_stop),%edi
jb 1b
/* Do not parse command line on EFI platform here. */
@@ -618,7 +618,7 @@ trampoline_setup:
push %eax
/* Copy bootstrap trampoline to low memory, below 1MB. */
- mov $sym_phys(trampoline_start),%esi
+ mov $sym_offs(trampoline_start),%esi
mov $((trampoline_end - trampoline_start) / 4),%ecx
rep movsl %fs:(%esi),%es:(%edi)
diff --git a/xen/arch/x86/boot/trampoline.S b/xen/arch/x86/boot/trampoline.S
index 64f8efd..b96607a 100644
--- a/xen/arch/x86/boot/trampoline.S
+++ b/xen/arch/x86/boot/trampoline.S
@@ -92,7 +92,7 @@ trampoline_protmode_entry:
mov %ecx,%cr4
/* Load pagetable base register. */
- mov $sym_phys(idle_pg_table),%eax
+ mov $sym_offs(idle_pg_table),%eax
add bootsym_rel(trampoline_xen_phys_start,4,%eax)
mov %eax,%cr3
diff --git a/xen/arch/x86/boot/wakeup.S b/xen/arch/x86/boot/wakeup.S
index 08ea9b2..42d57ab 100644
--- a/xen/arch/x86/boot/wakeup.S
+++ b/xen/arch/x86/boot/wakeup.S
@@ -120,7 +120,7 @@ wakeup_32:
mov $bootsym_rel(wakeup_stack, 4, %esp)
# check saved magic again
- mov $sym_phys(saved_magic), %eax
+ mov $sym_offs(saved_magic),%eax
add bootsym_rel(trampoline_xen_phys_start, 4, %eax)
mov (%eax), %eax
cmp $0x9abcdef0, %eax
@@ -133,7 +133,7 @@ wakeup_32:
mov %ecx, %cr4
/* Load pagetable base register */
- mov $sym_phys(idle_pg_table),%eax
+ mov $sym_offs(idle_pg_table),%eax
add bootsym_rel(trampoline_xen_phys_start,4,%eax)
mov %eax,%cr3
diff --git a/xen/arch/x86/boot/x86_64.S b/xen/arch/x86/boot/x86_64.S
index 7392004..86d3775 100644
--- a/xen/arch/x86/boot/x86_64.S
+++ b/xen/arch/x86/boot/x86_64.S
@@ -112,7 +112,7 @@ GLOBAL(__page_tables_start)
* actualy mapped (mostly using superpages). Uses 4x 4k pages.
*/
GLOBAL(l2_identmap)
- .quad sym_phys(l1_identmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l1_identmap) + __PAGE_HYPERVISOR
idx = 1
.rept 7
.quad (idx << L2_PAGETABLE_SHIFT) | PAGE_HYPERVISOR | _PAGE_PSE
@@ -130,7 +130,7 @@ GLOBAL(l2_xenmap)
.quad 0
idx = 1
.rept 7
- .quad sym_phys(__image_base__) + (idx << L2_PAGETABLE_SHIFT) + (PAGE_HYPERVISOR | _PAGE_PSE)
+ .quad sym_offs(__image_base__) + (idx << L2_PAGETABLE_SHIFT) + (PAGE_HYPERVISOR | _PAGE_PSE)
idx = idx + 1
.endr
.fill L2_PAGETABLE_ENTRIES - 8, 8, 0
@@ -141,7 +141,7 @@ l2_fixmap:
idx = 0
.rept L2_PAGETABLE_ENTRIES
.if idx == l2_table_offset(FIXADDR_TOP - 1)
- .quad sym_phys(l1_fixmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l1_fixmap) + __PAGE_HYPERVISOR
.else
.quad 0
.endif
@@ -153,7 +153,7 @@ l2_fixmap:
l3_identmap:
idx = 0
.rept 4
- .quad sym_phys(l2_identmap) + (idx << PAGE_SHIFT) + __PAGE_HYPERVISOR
+ .quad sym_offs(l2_identmap) + (idx << PAGE_SHIFT) + __PAGE_HYPERVISOR
idx = idx + 1
.endr
.fill L3_PAGETABLE_ENTRIES - 4, 8, 0
@@ -164,9 +164,9 @@ l3_xenmap:
idx = 0
.rept L3_PAGETABLE_ENTRIES
.if idx == l3_table_offset(XEN_VIRT_START)
- .quad sym_phys(l2_xenmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l2_xenmap) + __PAGE_HYPERVISOR
.elseif idx == l3_table_offset(FIXADDR_TOP - 1)
- .quad sym_phys(l2_fixmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l2_fixmap) + __PAGE_HYPERVISOR
.else
.quad 0
.endif
@@ -176,13 +176,13 @@ l3_xenmap:
/* Top-level master (and idle-domain) page directory. */
GLOBAL(idle_pg_table)
- .quad sym_phys(l3_bootmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l3_bootmap) + __PAGE_HYPERVISOR
idx = 1
.rept L4_PAGETABLE_ENTRIES - 1
.if idx == l4_table_offset(DIRECTMAP_VIRT_START)
- .quad sym_phys(l3_identmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l3_identmap) + __PAGE_HYPERVISOR
.elseif idx == l4_table_offset(XEN_VIRT_START)
- .quad sym_phys(l3_xenmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l3_xenmap) + __PAGE_HYPERVISOR
.else
.quad 0
.endif
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 13/13] x86: add multiboot2 protocol support for relocatable images
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
` (11 preceding siblings ...)
2016-09-28 22:51 ` [PATCH v8 12/13] x86/boot: rename sym_phys() to sym_offs() Daniel Kiper
@ 2016-09-28 22:51 ` Daniel Kiper
2016-09-29 7:46 ` Jan Beulich
12 siblings, 1 reply; 23+ messages in thread
From: Daniel Kiper @ 2016-09-28 22:51 UTC (permalink / raw)
To: xen-devel
Cc: jgross, sstabellini, andrew.cooper3, cardoe, pgnet.dev, ning.sun,
julien.grall, david.vrabel, jbeulich, qiaowei.ren, gang.wei,
fu.wei
Add multiboot2 protocol support for relocatable images. Only GRUB2 with
"multiboot2: Add support for relocatable images" patch understands
that feature. Older multiboot protocol (regardless of version)
compatible loaders ignore it and everything works as usual.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
---
v4 - suggestions/fixes:
- do not get Xen image load base address from
multiboot2 information in x86_64 code
(suggested by Jan Beulich),
- improve label names
(suggested by Jan Beulich),
- improve comments,
(suggested by Jan Beulich).
v3 - suggestions/fixes:
- use %esi and %r15d instead of %ebp to store
Xen image load base address,
- rename some types and constants,
- reformat xen/include/xen/multiboot2.h
(suggested by Konrad Rzeszutek Wilk),
- improve comments,
- improve commit message
(suggested by Konrad Rzeszutek Wilk).
---
xen/arch/x86/boot/head.S | 16 ++++++++++++++++
xen/arch/x86/x86_64/asm-offsets.c | 1 +
xen/include/xen/multiboot2.h | 13 +++++++++++++
3 files changed, 30 insertions(+)
diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index b217c5f..b744a55 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -82,6 +82,13 @@ multiboot2_header_start:
/* Align modules at page boundry. */
mb2ht_init MB2_HT(MODULE_ALIGN), MB2_HT(REQUIRED)
+ /* Load address preference. */
+ mb2ht_init MB2_HT(RELOCATABLE), MB2_HT(OPTIONAL), \
+ sym_offs(start), /* Min load address. */ \
+ 0xffffffff, /* The end of image max load address (4 GiB - 1). */ \
+ 0x200000, /* Load address alignment (2 MiB). */ \
+ MULTIBOOT2_LOAD_PREFERENCE_HIGH
+
/* Console flags tag. */
mb2ht_init MB2_HT(CONSOLE_FLAGS), MB2_HT(OPTIONAL), \
MULTIBOOT2_CONSOLE_FLAGS_EGA_TEXT_SUPPORTED
@@ -384,6 +391,15 @@ __start:
cmp %edi,MB2_fixed_total_size(%ebx)
jbe trampoline_bios_setup
+ /* Get Xen image load base address from Multiboot2 information. */
+ cmpl $MULTIBOOT2_TAG_TYPE_LOAD_BASE_ADDR,MB2_tag_type(%ecx)
+ jne 1f
+
+ mov MB2_load_base_addr(%ecx),%esi
+ sub $XEN_IMG_OFFSET,%esi
+ jmp 9f
+
+1:
/* Get mem_lower from Multiboot2 information. */
cmpl $MULTIBOOT2_TAG_TYPE_BASIC_MEMINFO,MB2_tag_type(%ecx)
cmove MB2_mem_lower(%ecx),%edx
diff --git a/xen/arch/x86/x86_64/asm-offsets.c b/xen/arch/x86/x86_64/asm-offsets.c
index 5d7a8e5..beac5ca 100644
--- a/xen/arch/x86/x86_64/asm-offsets.c
+++ b/xen/arch/x86/x86_64/asm-offsets.c
@@ -174,6 +174,7 @@ void __dummy__(void)
OFFSET(MB2_fixed_total_size, multiboot2_fixed_t, total_size);
OFFSET(MB2_tag_type, multiboot2_tag_t, type);
OFFSET(MB2_tag_size, multiboot2_tag_t, size);
+ OFFSET(MB2_load_base_addr, multiboot2_tag_load_base_addr_t, load_base_addr);
OFFSET(MB2_mem_lower, multiboot2_tag_basic_meminfo_t, mem_lower);
OFFSET(MB2_efi64_st, multiboot2_tag_efi64_t, pointer);
OFFSET(MB2_efi64_ih, multiboot2_tag_efi64_ih_t, pointer);
diff --git a/xen/include/xen/multiboot2.h b/xen/include/xen/multiboot2.h
index 8dd5800..feb4297 100644
--- a/xen/include/xen/multiboot2.h
+++ b/xen/include/xen/multiboot2.h
@@ -59,11 +59,17 @@
#define MULTIBOOT2_HEADER_TAG_EFI_BS 7
#define MULTIBOOT2_HEADER_TAG_ENTRY_ADDRESS_EFI32 8
#define MULTIBOOT2_HEADER_TAG_ENTRY_ADDRESS_EFI64 9
+#define MULTIBOOT2_HEADER_TAG_RELOCATABLE 10
/* Header tag flags. */
#define MULTIBOOT2_HEADER_TAG_REQUIRED 0
#define MULTIBOOT2_HEADER_TAG_OPTIONAL 1
+/* Where image should be loaded (suggestion not requirement). */
+#define MULTIBOOT2_LOAD_PREFERENCE_NONE 0
+#define MULTIBOOT2_LOAD_PREFERENCE_LOW 1
+#define MULTIBOOT2_LOAD_PREFERENCE_HIGH 2
+
/* Header console tag console_flags. */
#define MULTIBOOT2_CONSOLE_FLAGS_CONSOLE_REQUIRED 1
#define MULTIBOOT2_CONSOLE_FLAGS_EGA_TEXT_SUPPORTED 2
@@ -90,6 +96,7 @@
#define MULTIBOOT2_TAG_TYPE_EFI_BS 18
#define MULTIBOOT2_TAG_TYPE_EFI32_IH 19
#define MULTIBOOT2_TAG_TYPE_EFI64_IH 20
+#define MULTIBOOT2_TAG_TYPE_LOAD_BASE_ADDR 21
/* Multiboot 2 tag alignment. */
#define MULTIBOOT2_TAG_ALIGN 8
@@ -120,6 +127,12 @@ typedef struct {
typedef struct {
u32 type;
u32 size;
+ u32 load_base_addr;
+} multiboot2_tag_load_base_addr_t;
+
+typedef struct {
+ u32 type;
+ u32 size;
char string[];
} multiboot2_tag_string_t;
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH v8 04/13] x86: properly calculate xen ELF end of image address
2016-09-28 22:51 ` [PATCH v8 04/13] x86: properly calculate xen ELF end of image address Daniel Kiper
@ 2016-09-29 7:34 ` Jan Beulich
2016-09-29 7:51 ` Daniel Kiper
0 siblings, 1 reply; 23+ messages in thread
From: Jan Beulich @ 2016-09-29 7:34 UTC (permalink / raw)
To: Daniel Kiper
Cc: Juergen Gross, sstabellini, andrew.cooper3, cardoe, pgnet.dev,
ning.sun, julien.grall, david.vrabel, xen-devel, qiaowei.ren,
gang.wei, fu.wei
>>> On 29.09.16 at 00:51, <daniel.kiper@oracle.com> wrote:
> Currently xen ELF end of image address is calculated using first line from
> "nm -nr xen/xen-syms" output. However, potentially it may contain symbol
> address not related to the end of image in any way. It can happen if a symbol
> is introduced with address larger than _end symbol address. Such situation
> encountered when I linked xen ELF binary with xen/arch/x86/efi/relocs-dummy.S.
> Then first line from "nm -nr xen/xen-syms" contained "ffff82d0c0000000 A ALT_START"
> and xen ELF image memory size was silently set to 1023 MiB. This issue happened
> because there is no check which symbol address is used to calculate end of
> image address. So, let's fix it and take ELF end of image address by reading
> _end symbol address from nm output. This way xen ELF image build process is
> not prone to changes in order of nm output.
>
> This patch is prereq for "efi: build xen.gz with EFI code" patch which adds,
> among others, xen/arch/x86/efi/relocs-dummy.S to xen.gz output.
I still dislike how you put this. It would make a lot more sense if this
extra paragraph came much earlier (perhaps right after the first
sentence), and the rest of the description would then be slightly
re-worded to fit this aspect.
> --- a/xen/arch/x86/Makefile
> +++ b/xen/arch/x86/Makefile
> @@ -91,7 +91,7 @@ endif
>
> $(TARGET): $(TARGET)-syms $(efi-y) boot/mkelf32
> ./boot/mkelf32 $(notes_phdrs) $(TARGET)-syms $(TARGET) 0x100000 \
> - `$(NM) -nr $(TARGET)-syms | head -n 1 | sed -e 's/^\([^ ]*\).*/0x\1/'`
> + `$(NM) $(TARGET)-syms | sed -ne 's/^\([^ ]*\) . _end$$/0x\1/p'`
I thought we had agreed to use __2M_rwdata_end here.
And also note that I had said "such that the command line argument
here aligns with the first one on the previous line" in my reply to v7
regarding the indentation change.
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v8 06/13] efi: create new early memory allocator
2016-09-28 22:51 ` [PATCH v8 06/13] efi: create new early memory allocator Daniel Kiper
@ 2016-09-29 7:40 ` Jan Beulich
2016-09-29 8:08 ` Daniel Kiper
0 siblings, 1 reply; 23+ messages in thread
From: Jan Beulich @ 2016-09-29 7:40 UTC (permalink / raw)
To: Daniel Kiper
Cc: Juergen Gross, sstabellini, andrew.cooper3, cardoe, pgnet.dev,
ning.sun, julien.grall, david.vrabel, xen-devel, qiaowei.ren,
gang.wei, fu.wei
>>> On 29.09.16 at 00:51, <daniel.kiper@oracle.com> wrote:
> v8 - suggestions/fixes:
> - disable whole ebmalloc machinery on ARM platforms,
This is certainly not in line with my understanding of the outcome of
that discussion.
> --- a/xen/arch/x86/efi/stub.c
> +++ b/xen/arch/x86/efi/stub.c
> @@ -9,6 +9,8 @@ bool efi_enabled(unsigned int feature)
> return false;
> }
>
> +void __init free_ebmalloc_unused_mem(void) { }
> +
> void __init efi_init_memory(void) { }
Looking at this I wonder - can't the freeing be put into
efi_init_memory()?
> --- a/xen/common/efi/boot.c
> +++ b/xen/common/efi/boot.c
> @@ -98,6 +98,56 @@ static CHAR16 __initdata newline[] = L"\r\n";
> #define PrintStr(s) StdOut->OutputString(StdOut, s)
> #define PrintErr(s) StdErr->OutputString(StdErr, s)
>
> +#ifndef CONFIG_ARM
> +
> +/*
> + * TODO: Enable EFI boot allocator on ARM.
> + * This code can be common for x86 and ARM.
> + * Things TODO on ARM before enabling ebmalloc:
> + * - estimate required EBMALLOC_SIZE value,
> + * - where (in which section) ebmalloc_mem[]
> + * should live; if in .bss.page_aligned
> + * then whole BSS zeroing have to be
> + * disabled in xen/arch/arm/arm64/head.S;
> + * though BSS should be initialized somehow
> + * before use of variables living there,
> + * - add free_ebmalloc_unused_mem() call to
> + * e.g. xen/arch/arm/setup.c:init_done().
> + */
Please make better use of line length in such longer comments -
the longest line here ends at column 48 or so.
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v8 13/13] x86: add multiboot2 protocol support for relocatable images
2016-09-28 22:51 ` [PATCH v8 13/13] x86: add multiboot2 protocol support for relocatable images Daniel Kiper
@ 2016-09-29 7:46 ` Jan Beulich
0 siblings, 0 replies; 23+ messages in thread
From: Jan Beulich @ 2016-09-29 7:46 UTC (permalink / raw)
To: Daniel Kiper
Cc: Juergen Gross, sstabellini, andrew.cooper3, cardoe, pgnet.dev,
ning.sun, julien.grall, david.vrabel, xen-devel, qiaowei.ren,
gang.wei, fu.wei
>>> On 29.09.16 at 00:51, <daniel.kiper@oracle.com> wrote:
> @@ -384,6 +391,15 @@ __start:
> cmp %edi,MB2_fixed_total_size(%ebx)
> jbe trampoline_bios_setup
>
> + /* Get Xen image load base address from Multiboot2 information. */
> + cmpl $MULTIBOOT2_TAG_TYPE_LOAD_BASE_ADDR,MB2_tag_type(%ecx)
> + jne 1f
> +
> + mov MB2_load_base_addr(%ecx),%esi
> + sub $XEN_IMG_OFFSET,%esi
> + jmp 9f
> +
> +1:
> /* Get mem_lower from Multiboot2 information. */
> cmpl $MULTIBOOT2_TAG_TYPE_BASIC_MEMINFO,MB2_tag_type(%ecx)
> cmove MB2_mem_lower(%ecx),%edx
This demonstrates the downsides of using numeric labels for other
than branching across a few instructions: Without digging out where
(and which) other patch places that label, it is impossible to judge
whether this is correct now. If the label had been a suitably named
.L one, this would be much less of a problem (and much easier to
look for in the other patches).
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v8 04/13] x86: properly calculate xen ELF end of image address
2016-09-29 7:34 ` Jan Beulich
@ 2016-09-29 7:51 ` Daniel Kiper
2016-09-29 8:01 ` Jan Beulich
0 siblings, 1 reply; 23+ messages in thread
From: Daniel Kiper @ 2016-09-29 7:51 UTC (permalink / raw)
To: Jan Beulich
Cc: Juergen Gross, sstabellini, andrew.cooper3, cardoe, pgnet.dev,
ning.sun, julien.grall, david.vrabel, xen-devel, qiaowei.ren,
gang.wei, fu.wei
On Thu, Sep 29, 2016 at 01:34:30AM -0600, Jan Beulich wrote:
> >>> On 29.09.16 at 00:51, <daniel.kiper@oracle.com> wrote:
> > Currently xen ELF end of image address is calculated using first line from
> > "nm -nr xen/xen-syms" output. However, potentially it may contain symbol
> > address not related to the end of image in any way. It can happen if a symbol
> > is introduced with address larger than _end symbol address. Such situation
> > encountered when I linked xen ELF binary with xen/arch/x86/efi/relocs-dummy.S.
> > Then first line from "nm -nr xen/xen-syms" contained "ffff82d0c0000000 A ALT_START"
> > and xen ELF image memory size was silently set to 1023 MiB. This issue happened
> > because there is no check which symbol address is used to calculate end of
> > image address. So, let's fix it and take ELF end of image address by reading
> > _end symbol address from nm output. This way xen ELF image build process is
> > not prone to changes in order of nm output.
> >
> > This patch is prereq for "efi: build xen.gz with EFI code" patch which adds,
> > among others, xen/arch/x86/efi/relocs-dummy.S to xen.gz output.
>
> I still dislike how you put this. It would make a lot more sense if this
> extra paragraph came much earlier (perhaps right after the first
> sentence), and the rest of the description would then be slightly
> re-worded to fit this aspect.
OK.
> > --- a/xen/arch/x86/Makefile
> > +++ b/xen/arch/x86/Makefile
> > @@ -91,7 +91,7 @@ endif
> >
> > $(TARGET): $(TARGET)-syms $(efi-y) boot/mkelf32
> > ./boot/mkelf32 $(notes_phdrs) $(TARGET)-syms $(TARGET) 0x100000 \
> > - `$(NM) -nr $(TARGET)-syms | head -n 1 | sed -e 's/^\([^ ]*\).*/0x\1/'`
> > + `$(NM) $(TARGET)-syms | sed -ne 's/^\([^ ]*\) . _end$$/0x\1/p'`
>
> I thought we had agreed to use __2M_rwdata_end here.
Oh, I forgot about that.
> And also note that I had said "such that the command line argument
> here aligns with the first one on the previous line" in my reply to v7
> regarding the indentation change.
$(TARGET)-syms starts in the same column as $(notes_phdrs) does in the
final output as you requested. However, here it looks that it is
misaligned due to tab at the begging of the line.
Daniel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v8 04/13] x86: properly calculate xen ELF end of image address
2016-09-29 7:51 ` Daniel Kiper
@ 2016-09-29 8:01 ` Jan Beulich
2016-09-29 8:17 ` Daniel Kiper
0 siblings, 1 reply; 23+ messages in thread
From: Jan Beulich @ 2016-09-29 8:01 UTC (permalink / raw)
To: Daniel Kiper
Cc: Juergen Gross, sstabellini, andrew.cooper3, cardoe, pgnet.dev,
ning.sun, julien.grall, david.vrabel, xen-devel, qiaowei.ren,
gang.wei, fu.wei
>>> On 29.09.16 at 09:51, <daniel.kiper@oracle.com> wrote:
> On Thu, Sep 29, 2016 at 01:34:30AM -0600, Jan Beulich wrote:
>> >>> On 29.09.16 at 00:51, <daniel.kiper@oracle.com> wrote:
>> > --- a/xen/arch/x86/Makefile
>> > +++ b/xen/arch/x86/Makefile
>> > @@ -91,7 +91,7 @@ endif
>> >
>> > $(TARGET): $(TARGET)-syms $(efi-y) boot/mkelf32
>> > ./boot/mkelf32 $(notes_phdrs) $(TARGET)-syms $(TARGET) 0x100000 \
>> > - `$(NM) -nr $(TARGET)-syms | head -n 1 | sed -e 's/^\([^ ]*\).*/0x\1/'`
>> > + `$(NM) $(TARGET)-syms | sed -ne 's/^\([^ ]*\) . _end$$/0x\1/p'`
>>
>> I thought we had agreed to use __2M_rwdata_end here.
>
> Oh, I forgot about that.
>
>> And also note that I had said "such that the command line argument
>> here aligns with the first one on the previous line" in my reply to v7
>> regarding the indentation change.
>
> $(TARGET)-syms starts in the same column as $(notes_phdrs) does in the
> final output as you requested. However, here it looks that it is
> misaligned due to tab at the begging of the line.
I specifically looked at this in an editor using a fixed width font,
and I just took a look another time: I cannot confirm what you
say - the first back quote sits under the k of mkelf32. Or wait -
what you say is true, but is not what I had asked for. The whole
back-quoted string is an argument to mkelf32.
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v8 06/13] efi: create new early memory allocator
2016-09-29 7:40 ` Jan Beulich
@ 2016-09-29 8:08 ` Daniel Kiper
2016-09-29 12:47 ` Daniel Kiper
0 siblings, 1 reply; 23+ messages in thread
From: Daniel Kiper @ 2016-09-29 8:08 UTC (permalink / raw)
To: Jan Beulich
Cc: Juergen Gross, sstabellini, andrew.cooper3, cardoe, pgnet.dev,
ning.sun, julien.grall, david.vrabel, xen-devel, qiaowei.ren,
gang.wei, fu.wei
On Thu, Sep 29, 2016 at 01:40:44AM -0600, Jan Beulich wrote:
> >>> On 29.09.16 at 00:51, <daniel.kiper@oracle.com> wrote:
> > v8 - suggestions/fixes:
> > - disable whole ebmalloc machinery on ARM platforms,
>
> This is certainly not in line with my understanding of the outcome of
> that discussion.
Well, I understand that you would like to reduce number of changes
needed to enable ebmalloc ARM in the future. However, on the other
hand Julien wish to not have any calls to ebmalloc on ARM now. So,
if the ebmalloc code and data is not referenced anywhere on ARM then
I do not think that it make sens to build it into ARM xen image.
Especially if I am not sure that 1 MiB ebmalloc region is correct
or not on ARM. So, I would like to wait for Julien final opinion
about that. If he likes your proposal (maybe with some adjustments)
then I am not going to object.
> > --- a/xen/arch/x86/efi/stub.c
> > +++ b/xen/arch/x86/efi/stub.c
> > @@ -9,6 +9,8 @@ bool efi_enabled(unsigned int feature)
> > return false;
> > }
> >
> > +void __init free_ebmalloc_unused_mem(void) { }
> > +
> > void __init efi_init_memory(void) { }
>
> Looking at this I wonder - can't the freeing be put into
> efi_init_memory()?
I am not sure that all mem infrastructure needed to free ebmalloc unused
region exists then. Anyway, I will try it. However, I think that init_done()
is more natural place to do that because later we free .init* sections there.
> > --- a/xen/common/efi/boot.c
> > +++ b/xen/common/efi/boot.c
> > @@ -98,6 +98,56 @@ static CHAR16 __initdata newline[] = L"\r\n";
> > #define PrintStr(s) StdOut->OutputString(StdOut, s)
> > #define PrintErr(s) StdErr->OutputString(StdErr, s)
> >
> > +#ifndef CONFIG_ARM
> > +
> > +/*
> > + * TODO: Enable EFI boot allocator on ARM.
> > + * This code can be common for x86 and ARM.
> > + * Things TODO on ARM before enabling ebmalloc:
> > + * - estimate required EBMALLOC_SIZE value,
> > + * - where (in which section) ebmalloc_mem[]
> > + * should live; if in .bss.page_aligned
> > + * then whole BSS zeroing have to be
> > + * disabled in xen/arch/arm/arm64/head.S;
> > + * though BSS should be initialized somehow
> > + * before use of variables living there,
> > + * - add free_ebmalloc_unused_mem() call to
> > + * e.g. xen/arch/arm/setup.c:init_done().
> > + */
>
> Please make better use of line length in such longer comments -
> the longest line here ends at column 48 or so.
OK.
Daniel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v8 04/13] x86: properly calculate xen ELF end of image address
2016-09-29 8:01 ` Jan Beulich
@ 2016-09-29 8:17 ` Daniel Kiper
2016-09-29 8:34 ` Jan Beulich
0 siblings, 1 reply; 23+ messages in thread
From: Daniel Kiper @ 2016-09-29 8:17 UTC (permalink / raw)
To: Jan Beulich
Cc: Juergen Gross, sstabellini, andrew.cooper3, cardoe, pgnet.dev,
ning.sun, julien.grall, david.vrabel, xen-devel, qiaowei.ren,
gang.wei, fu.wei
On Thu, Sep 29, 2016 at 02:01:46AM -0600, Jan Beulich wrote:
> >>> On 29.09.16 at 09:51, <daniel.kiper@oracle.com> wrote:
> > On Thu, Sep 29, 2016 at 01:34:30AM -0600, Jan Beulich wrote:
> >> >>> On 29.09.16 at 00:51, <daniel.kiper@oracle.com> wrote:
> >> > --- a/xen/arch/x86/Makefile
> >> > +++ b/xen/arch/x86/Makefile
> >> > @@ -91,7 +91,7 @@ endif
> >> >
> >> > $(TARGET): $(TARGET)-syms $(efi-y) boot/mkelf32
> >> > ./boot/mkelf32 $(notes_phdrs) $(TARGET)-syms $(TARGET) 0x100000 \
> >> > - `$(NM) -nr $(TARGET)-syms | head -n 1 | sed -e 's/^\([^ ]*\).*/0x\1/'`
> >> > + `$(NM) $(TARGET)-syms | sed -ne 's/^\([^ ]*\) . _end$$/0x\1/p'`
> >>
> >> I thought we had agreed to use __2M_rwdata_end here.
> >
> > Oh, I forgot about that.
> >
> >> And also note that I had said "such that the command line argument
> >> here aligns with the first one on the previous line" in my reply to v7
> >> regarding the indentation change.
> >
> > $(TARGET)-syms starts in the same column as $(notes_phdrs) does in the
> > final output as you requested. However, here it looks that it is
> > misaligned due to tab at the begging of the line.
>
> I specifically looked at this in an editor using a fixed width font,
> and I just took a look another time: I cannot confirm what you
> say - the first back quote sits under the k of mkelf32. Or wait -
> what you say is true, but is not what I had asked for. The whole
> back-quoted string is an argument to mkelf32.
Ahhh... It looks that I misunderstood you. You wish to have first
back-quote under "$" sign which is the beginning of "$(notes_phdrs)".
Am I right?
Daniel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v8 04/13] x86: properly calculate xen ELF end of image address
2016-09-29 8:17 ` Daniel Kiper
@ 2016-09-29 8:34 ` Jan Beulich
0 siblings, 0 replies; 23+ messages in thread
From: Jan Beulich @ 2016-09-29 8:34 UTC (permalink / raw)
To: Daniel Kiper
Cc: Juergen Gross, sstabellini, andrew.cooper3, cardoe, pgnet.dev,
ning.sun, julien.grall, david.vrabel, xen-devel, qiaowei.ren,
gang.wei, fu.wei
>>> On 29.09.16 at 10:17, <daniel.kiper@oracle.com> wrote:
> On Thu, Sep 29, 2016 at 02:01:46AM -0600, Jan Beulich wrote:
>> >>> On 29.09.16 at 09:51, <daniel.kiper@oracle.com> wrote:
>> > On Thu, Sep 29, 2016 at 01:34:30AM -0600, Jan Beulich wrote:
>> >> >>> On 29.09.16 at 00:51, <daniel.kiper@oracle.com> wrote:
>> >> > --- a/xen/arch/x86/Makefile
>> >> > +++ b/xen/arch/x86/Makefile
>> >> > @@ -91,7 +91,7 @@ endif
>> >> >
>> >> > $(TARGET): $(TARGET)-syms $(efi-y) boot/mkelf32
>> >> > ./boot/mkelf32 $(notes_phdrs) $(TARGET)-syms $(TARGET) 0x100000 \
>> >> > - `$(NM) -nr $(TARGET)-syms | head -n 1 | sed -e 's/^\([^ ]*\).*/0x\1/'`
>> >> > + `$(NM) $(TARGET)-syms | sed -ne 's/^\([^ ]*\) . _end$$/0x\1/p'`
>> >>
>> >> I thought we had agreed to use __2M_rwdata_end here.
>> >
>> > Oh, I forgot about that.
>> >
>> >> And also note that I had said "such that the command line argument
>> >> here aligns with the first one on the previous line" in my reply to v7
>> >> regarding the indentation change.
>> >
>> > $(TARGET)-syms starts in the same column as $(notes_phdrs) does in the
>> > final output as you requested. However, here it looks that it is
>> > misaligned due to tab at the begging of the line.
>>
>> I specifically looked at this in an editor using a fixed width font,
>> and I just took a look another time: I cannot confirm what you
>> say - the first back quote sits under the k of mkelf32. Or wait -
>> what you say is true, but is not what I had asked for. The whole
>> back-quoted string is an argument to mkelf32.
>
> Ahhh... It looks that I misunderstood you. You wish to have first
> back-quote under "$" sign which is the beginning of "$(notes_phdrs)".
> Am I right?
Yes.
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v8 06/13] efi: create new early memory allocator
2016-09-29 8:08 ` Daniel Kiper
@ 2016-09-29 12:47 ` Daniel Kiper
0 siblings, 0 replies; 23+ messages in thread
From: Daniel Kiper @ 2016-09-29 12:47 UTC (permalink / raw)
To: julien.grall
Cc: Juergen Gross, sstabellini, andrew.cooper3, cardoe, pgnet.dev,
ning.sun, david.vrabel, jbeulich, xen-devel, qiaowei.ren,
gang.wei, fu.wei
On Thu, Sep 29, 2016 at 10:08:30AM +0200, Daniel Kiper wrote:
> On Thu, Sep 29, 2016 at 01:40:44AM -0600, Jan Beulich wrote:
> > >>> On 29.09.16 at 00:51, <daniel.kiper@oracle.com> wrote:
> > > v8 - suggestions/fixes:
> > > - disable whole ebmalloc machinery on ARM platforms,
> >
> > This is certainly not in line with my understanding of the outcome of
> > that discussion.
>
> Well, I understand that you would like to reduce number of changes
> needed to enable ebmalloc ARM in the future. However, on the other
> hand Julien wish to not have any calls to ebmalloc on ARM now. So,
> if the ebmalloc code and data is not referenced anywhere on ARM then
> I do not think that it make sens to build it into ARM xen image.
> Especially if I am not sure that 1 MiB ebmalloc region is correct
> or not on ARM. So, I would like to wait for Julien final opinion
> about that. If he likes your proposal (maybe with some adjustments)
> then I am not going to object.
Julien, ping? Sorry for fire drill but tomorrow is last day before
hard code freeze. Please tell us what do you think about this patch.
Then I will prepare v9 and post it today evening or tomorrow morning.
Daniel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2016-09-29 12:48 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-28 22:51 [PATCH v8 00/13] x86: multiboot2 protocol support Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 01/13] x86: add " Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 02/13] efi: create efi_enabled() Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 03/13] x86: allow EFI reboot method neither on EFI platforms Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 04/13] x86: properly calculate xen ELF end of image address Daniel Kiper
2016-09-29 7:34 ` Jan Beulich
2016-09-29 7:51 ` Daniel Kiper
2016-09-29 8:01 ` Jan Beulich
2016-09-29 8:17 ` Daniel Kiper
2016-09-29 8:34 ` Jan Beulich
2016-09-28 22:51 ` [PATCH v8 05/13] efi: build xen.gz with EFI code Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 06/13] efi: create new early memory allocator Daniel Kiper
2016-09-29 7:40 ` Jan Beulich
2016-09-29 8:08 ` Daniel Kiper
2016-09-29 12:47 ` Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 07/13] x86: add multiboot2 protocol support for EFI platforms Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 08/13] x86/boot: implement early command line parser in C Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 09/13] x86: change default load address from 1 MiB to 2 MiB Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 10/13] x86/setup: use XEN_IMG_OFFSET instead of Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 11/13] x86: make Xen early boot code relocatable Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 12/13] x86/boot: rename sym_phys() to sym_offs() Daniel Kiper
2016-09-28 22:51 ` [PATCH v8 13/13] x86: add multiboot2 protocol support for relocatable images Daniel Kiper
2016-09-29 7:46 ` Jan Beulich
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.