From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753431AbcJELWG (ORCPT ); Wed, 5 Oct 2016 07:22:06 -0400 Received: from ec2-52-27-115-49.us-west-2.compute.amazonaws.com ([52.27.115.49]:52248 "EHLO s-opensource.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752105AbcJELWF (ORCPT ); Wed, 5 Oct 2016 07:22:05 -0400 Date: Wed, 5 Oct 2016 08:21:57 -0300 From: Mauro Carvalho Chehab To: Jiri Kosina Cc: Patrick Boettcher , =?UTF-8?B?SsO2cmc=?= Otte , Linux Kernel Mailing List , Andy Lutomirski , Michael Krufky , Mauro Carvalho Chehab , Linux Media Mailing List Subject: Re: Problem with VMAP_STACK=y Message-ID: <20161005082157.788255f2@vento.lan> In-Reply-To: <20161005060450.1b0f2152@vento.lan> References: <20161005093417.6e82bd97@vdr> <20161005060450.1b0f2152@vento.lan> Organization: Samsung X-Mailer: Claws Mail 3.13.2 (GTK+ 2.24.31; x86_64-redhat-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Em Wed, 5 Oct 2016 06:04:50 -0300 Mauro Carvalho Chehab escreveu: > Em Wed, 5 Oct 2016 09:50:42 +0200 (CEST) > Jiri Kosina escreveu: > > > On Wed, 5 Oct 2016, Patrick Boettcher wrote: > > > > > > > Thanks for the quick response. > > > > > Drivers are: > > > > > dvb_core, dvb_usb, dbv_usb_cynergyT2 > > > > > > > > This dbv_usb_cynergyT2 is not from Linus' tree, is it? I don't seem > > > > to be able to find it, and the only google hit I am getting is your > > > > very mail to LKML :) > > > > > > It's a typo, it should say dvb_usb_cinergyT2. > > > > Ah, thanks. Same issues there in > > > > cinergyt2_frontend_attach() > > cinergyt2_rc_query() > > > > I think this would require more in-depth review of all the media drivers > > and having all this fixed for 4.9. It should be pretty straightforward; > > all the instances I've seen so far should be just straightforward > > conversion to kmalloc() + kfree(), as the buffer is not being embedded in > > any structure etc. > > What we're doing on most cases is to put a buffer (usually with 80 > chars for USB drivers) inside the "state" struct (on DVB drivers), > in order to avoid doing kmalloc/kfree all the times. One such patch is > changeset c4a98793a63c4. > > I'm enclosing a non-tested patch fixing it for the cinergyT2-core.c > driver. > > Thanks, > Mauro And this is another such patch for af9005, also untested. If I remember well, the firmware load and warm/cold state logic calls happen before allocating space for struct state. So, it needs to call of kmalloc on two places. I may write similar patches for other drivers under drivers/media/usb, if I have enough time for that. Regards, Mauro [PATCH] af9005: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c index efa782ed6e2d..cc5815de1cfb 100644 --- a/drivers/media/usb/dvb-usb/af9005.c +++ b/drivers/media/usb/dvb-usb/af9005.c @@ -52,17 +52,15 @@ u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; struct af9005_device_state { u8 sequence; int led_state; + unsigned char data[256]; }; static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, int readwrite, int type, u8 * values, int len) { struct af9005_device_state *st = d->priv; - u8 obuf[16] = { 0 }; - u8 ibuf[17] = { 0 }; - u8 command; - int i; - int ret; + u8 command, seq; + int i, ret; if (len < 1) { err("generic read/write, less than 1 byte. Makes no sense."); @@ -73,16 +71,16 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, return -EINVAL; } - obuf[0] = 14; /* rest of buffer length low */ - obuf[1] = 0; /* rest of buffer length high */ + st->data[0] = 14; /* rest of buffer length low */ + st->data[1] = 0; /* rest of buffer length high */ - obuf[2] = AF9005_REGISTER_RW; /* register operation */ - obuf[3] = 12; /* rest of buffer length */ + st->data[2] = AF9005_REGISTER_RW; /* register operation */ + st->data[3] = 12; /* rest of buffer length */ - obuf[4] = st->sequence++; /* sequence number */ + st->data[4] = seq = st->sequence++; /* sequence number */ - obuf[5] = (u8) (reg >> 8); /* register address */ - obuf[6] = (u8) (reg & 0xff); + st->data[5] = (u8) (reg >> 8); /* register address */ + st->data[6] = (u8) (reg & 0xff); if (type == AF9005_OFDM_REG) { command = AF9005_CMD_OFDM_REG; @@ -96,49 +94,43 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, command |= readwrite; if (readwrite == AF9005_CMD_WRITE) for (i = 0; i < len; i++) - obuf[8 + i] = values[i]; + st->data[8 + i] = values[i]; else if (type == AF9005_TUNER_REG) /* read command for tuner, the first byte contains the i2c address */ - obuf[8] = values[0]; - obuf[7] = command; + st->data[8] = values[0]; + st->data[7] = command; - ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 17, 0); + ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 17, 0); if (ret) return ret; /* sanity check */ - if (ibuf[2] != AF9005_REGISTER_RW_ACK) { + if (st->data[2] != AF9005_REGISTER_RW_ACK) { err("generic read/write, wrong reply code."); return -EIO; } - if (ibuf[3] != 0x0d) { + if (st->data[3] != 0x0d) { err("generic read/write, wrong length in reply."); return -EIO; } - if (ibuf[4] != obuf[4]) { + if (st->data[4] != seq) { err("generic read/write, wrong sequence in reply."); return -EIO; } /* - Windows driver doesn't check these fields, in fact sometimes - the register in the reply is different that what has been sent - - if (ibuf[5] != obuf[5] || ibuf[6] != obuf[6]) { - err("generic read/write, wrong register in reply."); - return -EIO; - } - if (ibuf[7] != command) { - err("generic read/write wrong command in reply."); - return -EIO; - } + * In thesis, both input and output buffers should have + * identical values for st->data[5] to st->data[8]. + * However, windows driver doesn't check these fields, in fact + * sometimes the register in the reply is different that what + * has been sent */ - if (ibuf[16] != 0x01) { + if (st->data[16] != 0x01) { err("generic read/write wrong status code in reply."); return -EIO; } if (readwrite == AF9005_CMD_READ) for (i = 0; i < len; i++) - values[i] = ibuf[8 + i]; + values[i] = st->data[8 + i]; return 0; @@ -464,8 +456,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, struct af9005_device_state *st = d->priv; int ret, i, packet_len; - u8 buf[64]; - u8 ibuf[64]; + u8 seq; if (wlen < 0) { err("send command, wlen less than 0 bytes. Makes no sense."); @@ -480,37 +471,37 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, return -EINVAL; } packet_len = wlen + 5; - buf[0] = (u8) (packet_len & 0xff); - buf[1] = (u8) ((packet_len & 0xff00) >> 8); - - buf[2] = 0x26; /* packet type */ - buf[3] = wlen + 3; - buf[4] = st->sequence++; - buf[5] = command; - buf[6] = wlen; + st->data[0] = (u8) (packet_len & 0xff); + st->data[1] = (u8) ((packet_len & 0xff00) >> 8); + + st->data[2] = 0x26; /* packet type */ + st->data[3] = wlen + 3; + st->data[4] = seq = st->sequence++; + st->data[5] = command; + st->data[6] = wlen; for (i = 0; i < wlen; i++) - buf[7 + i] = wbuf[i]; - ret = dvb_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0); + st->data[7 + i] = wbuf[i]; + ret = dvb_usb_generic_rw(d, st->data, wlen + 7, st->data, rlen + 7, 0); if (ret) return ret; - if (ibuf[2] != 0x27) { + if (st->data[2] != 0x27) { err("send command, wrong reply code."); return -EIO; } - if (ibuf[4] != buf[4]) { + if (st->data[4] != seq) { err("send command, wrong sequence in reply."); return -EIO; } - if (ibuf[5] != 0x01) { + if (st->data[5] != 0x01) { err("send command, wrong status code in reply."); return -EIO; } - if (ibuf[6] != rlen) { + if (st->data[6] != rlen) { err("send command, invalid data length in reply."); return -EIO; } for (i = 0; i < rlen; i++) - rbuf[i] = ibuf[i + 7]; + rbuf[i] = st->data[i + 7]; return 0; } @@ -518,56 +509,56 @@ int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, int len) { struct af9005_device_state *st = d->priv; - u8 obuf[16], ibuf[14]; + u8 seq; int ret, i; - memset(obuf, 0, sizeof(obuf)); - memset(ibuf, 0, sizeof(ibuf)); + memset(st->data, 0, sizeof(st->data)); - obuf[0] = 14; /* length of rest of packet low */ - obuf[1] = 0; /* length of rest of packer high */ + st->data[0] = 14; /* length of rest of packet low */ + st->data[1] = 0; /* length of rest of packer high */ - obuf[2] = 0x2a; /* read/write eeprom */ + st->data[2] = 0x2a; /* read/write eeprom */ - obuf[3] = 12; /* size */ + st->data[3] = 12; /* size */ - obuf[4] = st->sequence++; + st->data[4] = seq = st->sequence++; - obuf[5] = 0; /* read */ + st->data[5] = 0; /* read */ - obuf[6] = len; - obuf[7] = address; - ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 14, 0); + st->data[6] = len; + st->data[7] = address; + ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 14, 0); if (ret) return ret; - if (ibuf[2] != 0x2b) { + if (st->data[2] != 0x2b) { err("Read eeprom, invalid reply code"); return -EIO; } - if (ibuf[3] != 10) { + if (st->data[3] != 10) { err("Read eeprom, invalid reply length"); return -EIO; } - if (ibuf[4] != obuf[4]) { + if (st->data[4] != seq) { err("Read eeprom, wrong sequence in reply "); return -EIO; } - if (ibuf[5] != 1) { + if (st->data[5] != 1) { err("Read eeprom, wrong status in reply "); return -EIO; } for (i = 0; i < len; i++) { - values[i] = ibuf[6 + i]; + values[i] = st->data[6 + i]; } return 0; } -static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply) +static int af9005_boot_packet(struct usb_device *udev, int type, u8 *reply, + u8 *buf, int size) { - u8 buf[FW_BULKOUT_SIZE + 2]; u16 checksum; int act_len, i, ret; - memset(buf, 0, sizeof(buf)); + + memset(buf, 0, size); buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); switch (type) { @@ -720,15 +711,21 @@ static int af9005_download_firmware(struct usb_device *udev, const struct firmwa { int i, packets, ret, act_len; - u8 buf[FW_BULKOUT_SIZE + 2]; + u8 *buf; u8 reply; - ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf, + FW_BULKOUT_SIZE + 2); if (ret) - return ret; + goto err; if (reply != 0x01) { err("before downloading firmware, FW_CONFIG expected 0x01, received 0x%x", reply); - return -EIO; + ret = -EIO; + goto err; } packets = fw->size / FW_BULKOUT_SIZE; buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); @@ -743,28 +740,35 @@ static int af9005_download_firmware(struct usb_device *udev, const struct firmwa buf, FW_BULKOUT_SIZE + 2, &act_len, 1000); if (ret) { err("firmware download failed at packet %d with code %d", i, ret); - return ret; + goto err; } } - ret = af9005_boot_packet(udev, FW_CONFIRM, &reply); + ret = af9005_boot_packet(udev, FW_CONFIRM, &reply, + buf, FW_BULKOUT_SIZE + 2); if (ret) - return ret; + goto err; if (reply != (u8) (packets & 0xff)) { err("after downloading firmware, FW_CONFIRM expected 0x%x, received 0x%x", packets & 0xff, reply); - return -EIO; + ret = -EIO; + goto err; } - ret = af9005_boot_packet(udev, FW_BOOT, &reply); + ret = af9005_boot_packet(udev, FW_BOOT, &reply, buf, + FW_BULKOUT_SIZE + 2); if (ret) - return ret; - ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + goto err; + ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf, + FW_BULKOUT_SIZE + 2); if (ret) - return ret; + goto err; if (reply != 0x02) { err("after downloading firmware, FW_CONFIG expected 0x02, received 0x%x", reply); - return -EIO; + ret = -EIO; + goto err; } - return 0; +err: + kfree(buf); + return ret; } @@ -823,9 +827,7 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) { struct af9005_device_state *st = d->priv; int ret, len; - - u8 obuf[5]; - u8 ibuf[256]; + u8 seq; *state = REMOTE_NO_KEY_PRESSED; if (rc_decode == NULL) { @@ -833,33 +835,33 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) return 0; } /* deb_info("rc_query\n"); */ - obuf[0] = 3; /* rest of packet length low */ - obuf[1] = 0; /* rest of packet lentgh high */ - obuf[2] = 0x40; /* read remote */ - obuf[3] = 1; /* rest of packet length */ - obuf[4] = st->sequence++; /* sequence number */ - ret = dvb_usb_generic_rw(d, obuf, 5, ibuf, 256, 0); + st->data[0] = 3; /* rest of packet length low */ + st->data[1] = 0; /* rest of packet lentgh high */ + st->data[2] = 0x40; /* read remote */ + st->data[3] = 1; /* rest of packet length */ + st->data[4] = seq = st->sequence++; /* sequence number */ + ret = dvb_usb_generic_rw(d, st->data, 5, st->data, 256, 0); if (ret) { err("rc query failed"); return ret; } - if (ibuf[2] != 0x41) { + if (st->data[2] != 0x41) { err("rc query bad header."); return -EIO; } - if (ibuf[4] != obuf[4]) { + if (st->data[4] != seq) { err("rc query bad sequence."); return -EIO; } - len = ibuf[5]; + len = st->data[5]; if (len > 246) { err("rc query invalid length"); return -EIO; } if (len > 0) { deb_rc("rc data (%d) ", len); - debug_dump((ibuf + 6), len, deb_rc); - ret = rc_decode(d, &ibuf[6], len, event, state); + debug_dump((st->data + 6), len, deb_rc); + ret = rc_decode(d, &st->data[6], len, event, state); if (ret) { err("rc_decode failed"); return ret; @@ -953,10 +955,16 @@ static int af9005_identify_state(struct usb_device *udev, int *cold) { int ret; - u8 reply; - ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + u8 reply, *buf; + + buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = af9005_boot_packet(udev, FW_CONFIG, &reply, + buf, FW_BULKOUT_SIZE + 2); if (ret) - return ret; + goto err; deb_info("result of FW_CONFIG in identify state %d\n", reply); if (reply == 0x01) *cold = 1; @@ -965,7 +973,10 @@ static int af9005_identify_state(struct usb_device *udev, else return -EIO; deb_info("Identify state cold = %d\n", *cold); - return 0; + +err: + kfree(buf); + return ret; } static struct dvb_usb_device_properties af9005_properties; Thanks, Mauro