All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michel Dänzer" <michel@daenzer.net>
To: dri-devel@lists.freedesktop.org
Subject: [PATCH libdrm v2 1/2] headers: Sync drm{,_mode}.h with the kernel
Date: Thu, 13 Oct 2016 17:04:35 +0900	[thread overview]
Message-ID: <20161013080436.16041-1-michel@daenzer.net> (raw)
In-Reply-To: <20161012094159.24842-1-michel@daenzer.net>

From: Michel Dänzer <michel.daenzer@amd.com>

Generated using make headers_install, based on linus master commit
b67be92feb486f800d80d72c67fd87b47b79b18e.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
---
 include/drm/drm.h      | 17 +++++++++++++++++
 include/drm/drm_mode.h | 49 ++++++++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 63 insertions(+), 3 deletions(-)

diff --git a/include/drm/drm.h b/include/drm/drm.h
index b4ebaa9..f6fd5c2 100644
--- a/include/drm/drm.h
+++ b/include/drm/drm.h
@@ -59,6 +59,10 @@ typedef unsigned long drm_handle_t;
 
 #endif
 
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
 #define DRM_NAME	"drm"	  /**< Name in kernel, /dev, and /proc */
 #define DRM_MIN_ORDER	5	  /**< At least 2^5 bytes = 32 bytes */
 #define DRM_MAX_ORDER	22	  /**< Up to 2^22 bytes = 4MB */
@@ -636,6 +640,7 @@ struct drm_gem_open {
 #define DRM_CAP_CURSOR_WIDTH		0x8
 #define DRM_CAP_CURSOR_HEIGHT		0x9
 #define DRM_CAP_ADDFB2_MODIFIERS	0x10
+#define DRM_CAP_PAGE_FLIP_TARGET	0x11
 
 /** DRM_IOCTL_GET_CAP ioctl argument type */
 struct drm_get_cap {
@@ -685,8 +690,16 @@ struct drm_prime_handle {
 	__s32 fd;
 };
 
+#if defined(__cplusplus)
+}
+#endif
+
 #include "drm_mode.h"
 
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
 #define DRM_IOCTL_BASE			'd'
 #define DRM_IO(nr)			_IO(DRM_IOCTL_BASE,nr)
 #define DRM_IOR(nr,type)		_IOR(DRM_IOCTL_BASE,nr,type)
@@ -878,4 +891,8 @@ typedef struct drm_agp_info drm_agp_info_t;
 typedef struct drm_scatter_gather drm_scatter_gather_t;
 typedef struct drm_set_version drm_set_version_t;
 
+#if defined(__cplusplus)
+}
+#endif
+
 #endif
diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h
index 7a7856e..df0e350 100644
--- a/include/drm/drm_mode.h
+++ b/include/drm/drm_mode.h
@@ -29,6 +29,10 @@
 
 #include "drm.h"
 
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
 #define DRM_DISPLAY_INFO_LEN	32
 #define DRM_CONNECTOR_NAME_LEN	32
 #define DRM_DISPLAY_MODE_LEN	32
@@ -202,6 +206,7 @@ struct drm_mode_get_plane_res {
 #define DRM_MODE_ENCODER_VIRTUAL 5
 #define DRM_MODE_ENCODER_DSI	6
 #define DRM_MODE_ENCODER_DPMST	7
+#define DRM_MODE_ENCODER_DPI	8
 
 struct drm_mode_get_encoder {
 	__u32 encoder_id;
@@ -241,6 +246,7 @@ struct drm_mode_get_encoder {
 #define DRM_MODE_CONNECTOR_eDP		14
 #define DRM_MODE_CONNECTOR_VIRTUAL      15
 #define DRM_MODE_CONNECTOR_DSI		16
+#define DRM_MODE_CONNECTOR_DPI		17
 
 struct drm_mode_get_connector {
 
@@ -514,7 +520,13 @@ struct drm_color_lut {
 
 #define DRM_MODE_PAGE_FLIP_EVENT 0x01
 #define DRM_MODE_PAGE_FLIP_ASYNC 0x02
-#define DRM_MODE_PAGE_FLIP_FLAGS (DRM_MODE_PAGE_FLIP_EVENT|DRM_MODE_PAGE_FLIP_ASYNC)
+#define DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE 0x4
+#define DRM_MODE_PAGE_FLIP_TARGET_RELATIVE 0x8
+#define DRM_MODE_PAGE_FLIP_TARGET (DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE | \
+				   DRM_MODE_PAGE_FLIP_TARGET_RELATIVE)
+#define DRM_MODE_PAGE_FLIP_FLAGS (DRM_MODE_PAGE_FLIP_EVENT | \
+				  DRM_MODE_PAGE_FLIP_ASYNC | \
+				  DRM_MODE_PAGE_FLIP_TARGET)
 
 /*
  * Request a page flip on the specified crtc.
@@ -537,8 +549,7 @@ struct drm_color_lut {
  * 'as soon as possible', meaning that it not delay waiting for vblank.
  * This may cause tearing on the screen.
  *
- * The reserved field must be zero until we figure out something
- * clever to use it for.
+ * The reserved field must be zero.
  */
 
 struct drm_mode_crtc_page_flip {
@@ -549,6 +560,34 @@ struct drm_mode_crtc_page_flip {
 	__u64 user_data;
 };
 
+/*
+ * Request a page flip on the specified crtc.
+ *
+ * Same as struct drm_mode_crtc_page_flip, but supports new flags and
+ * re-purposes the reserved field:
+ *
+ * The sequence field must be zero unless either of the
+ * DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags is specified. When
+ * the ABSOLUTE flag is specified, the sequence field denotes the absolute
+ * vblank sequence when the flip should take effect. When the RELATIVE
+ * flag is specified, the sequence field denotes the relative (to the
+ * current one when the ioctl is called) vblank sequence when the flip
+ * should take effect. NOTE: DRM_IOCTL_WAIT_VBLANK must still be used to
+ * make sure the vblank sequence before the target one has passed before
+ * calling this ioctl. The purpose of the
+ * DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags is merely to clarify
+ * the target for when code dealing with a page flip runs during a
+ * vertical blank period.
+ */
+
+struct drm_mode_crtc_page_flip_target {
+	__u32 crtc_id;
+	__u32 fb_id;
+	__u32 flags;
+	__u32 sequence;
+	__u64 user_data;
+};
+
 /* create a dumb scanout buffer */
 struct drm_mode_create_dumb {
 	__u32 height;
@@ -621,4 +660,8 @@ struct drm_mode_destroy_blob {
 	__u32 blob_id;
 };
 
+#if defined(__cplusplus)
+}
+#endif
+
 #endif
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2016-10-13  8:04 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-12  9:41 [PATCH libdrm] Add support for DRM_MODE_PAGE_FLIP_TARGET_* flags Michel Dänzer
2016-10-12 15:54 ` Emil Velikov
2016-10-13  8:07   ` Michel Dänzer
2016-10-13  8:04 ` Michel Dänzer [this message]
2016-10-13  8:04   ` [PATCH libdrm v2 2/2] Add drmModePageFlipTarget Michel Dänzer
2016-10-17  6:09     ` Daniel Vetter
2017-04-04 17:12 [PATCH libdrm 2/2] Add CRTC ID to vblank event Emil Velikov
2017-04-04 20:49 ` [PATCH libdrm v2 1/2] Headers: Sync drm{,_mode}.h with the kernel Daniel Stone

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161013080436.16041-1-michel@daenzer.net \
    --to=michel@daenzer.net \
    --cc=dri-devel@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.