From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756982AbcJXBuU (ORCPT ); Sun, 23 Oct 2016 21:50:20 -0400 Received: from mail-wm0-f41.google.com ([74.125.82.41]:37134 "EHLO mail-wm0-f41.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752973AbcJXBuS (ORCPT ); Sun, 23 Oct 2016 21:50:18 -0400 Date: Sun, 23 Oct 2016 21:50:13 -0400 From: Jarod Wilson To: Stefan Richter Cc: "David S. Miller" , netdev@vger.kernel.org, linux1394-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org Subject: Re: [PATCH net-next 2/2] firewire: net: set initial MTU = 1500 unconditionally, fix IPv6 on some CardBus cards Message-ID: <20161024015013.GB42084@redhat.com> References: <20161019023333.15760-1-jarod@redhat.com> <20161020175524.6184-1-jarod@redhat.com> <20161020175524.6184-8-jarod@redhat.com> <20161022211606.3b5d137d@kant> <20161022212759.228c7642@kant> <20161023011824.GE32569@redhat.com> <20161023162903.4166a35d@kant> <20161023163056.6bc38610@kant> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20161023163056.6bc38610@kant> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Sun, Oct 23, 2016 at 04:30:56PM +0200, Stefan Richter wrote: > firewire-net, like the older eth1394 driver, reduced the initial MTU to > less than 1500 octets if the local link layer controller's asynchronous > packet reception limit was lower. > > This is bogus, since this reception limit does not have anything to do > with the transmission limit. Neither did this reduction affect the TX > path positively, nor could it prevent link fragmentation at the RX path. > > Many FireWire CardBus cards have a max_rec of 9, causing an initial MTU > of 1024 - 16 = 1008. RFC 2734 and RFC 3146 allow a minimum max_rec = 8, > which would result in an initial MTU of 512 - 16 = 496. On such cards, > IPv6 could only be employed if the MTU was manually increased to 1280 or > more, i.e. IPv6 would not work without intervention from userland. > > We now always initialize the MTU to 1500, which is the default according > to RFC 2734 and RFC 3146. > > On a VIA VT6316 based CardBus card which was affected by this, changing > the MTU from 1008 to 1500 also increases TX bandwidth by 6 %. > RX remains unaffected. > > CC: netdev@vger.kernel.org > CC: linux1394-devel@lists.sourceforge.net > CC: Jarod Wilson > Signed-off-by: Stefan Richter > --- > drivers/firewire/net.c | 8 +------- > 1 file changed, 1 insertion(+), 7 deletions(-) > > diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c > index 99379542b263..03715e7d9d92 100644 > --- a/drivers/firewire/net.c > +++ b/drivers/firewire/net.c > @@ -1463,13 +1463,7 @@ static int fwnet_probe(struct fw_unit *unit, > goto out; > dev->local_fifo = dev->handler.offset; > > - /* > - * Use the RFC 2734 default 1500 octets or the maximum payload > - * as initial MTU > - */ > - net->mtu = min(1500U, > - (1U << (card->max_receive + 1)) > - - RFC2374_FRAG_HDR_SIZE - IEEE1394_GASP_HDR_SIZE); > + net->mtu = 1500U; Should be able to do just net->mtu = ETH_DATA_LEN; -- Jarod Wilson jarod@redhat.com