From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754853AbcKCM0T (ORCPT ); Thu, 3 Nov 2016 08:26:19 -0400 Received: from mailout3.samsung.com ([203.254.224.33]:36201 "EHLO mailout3.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752590AbcKCM0O (ORCPT ); Thu, 3 Nov 2016 08:26:14 -0400 X-AuditID: cbfee61b-f796f6d000004092-da-581b2cda00cd Date: Thu, 03 Nov 2016 21:26:02 +0900 From: Andi Shyti To: Chanwoo Choi Cc: krzk@kernel.org, kgene@kernel.org, javier@osg.samsung.com, robh+dt@kernel.org, mark.rutland@arm.com, catalin.marinas@arm.com, will.deacon@arm.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, jh80.chung@samsung.com, sw0312.kim@samsung.com, jy0922.shim@samsung.com, inki.dae@samsung.com, jonghwa3.lee@samsung.com, beomho.seo@samsung.com, jaewon02.kim@samsung.com, human.hwang@samsung.com, ideal.song@samsung.com, ingi2.kim@samsung.com, m.szyprowski@samsung.com, a.hajda@samsung.com, s.nawrocki@samsung.com, chanwoo@kernel.org Subject: Re: [PATCH v3 3/5] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC Message-id: <20161103122602.zchqbxo5tbcidmdl@gangnam.samsung> References: <1478155149-28527-1-git-send-email-cw00.choi@samsung.com> <1478155149-28527-4-git-send-email-cw00.choi@samsung.com> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-disposition: inline In-reply-to: <1478155149-28527-4-git-send-email-cw00.choi@samsung.com> User-Agent: NeoMutt/20161014 (1.7.1) X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFprDKsWRmVeSWpSXmKPExsVy+t9jAd1bOtIRBv/eqlncWneO1eL0p23s Fu+X9TBaTLxxhcXi+pfnrBbzjwAlls7oY7XY9fc+o8WOm1/YLCbdn8BisaPhCKvFm7drmCxu /Gpjteg8+4TZ4sW9iywW/Y9fM1ucP7+B3WLT42usFpd3zWGzmHF+H5PF2iN32S2WXr/IZNG6 9wi7xeE37awWMya/ZLN4+fEEi4OUx5p5axg9Nq3qZPPYvKTeY0v/XXaPvi2rGD0+b5ILYIty s8lITUxJLVJIzUvOT8nMS7dVCg1x07VQUshLzE21VYrQ9Q0JUlIoS8wpBfKMDNCAg3OAe7CS vl2CW0bT7W2MBf3nWCq6+mewNzA+3sfcxcjJISFgIvFvyjQ2CFtM4sK99UA2F4eQwFJGiYnP DjNCOB8ZJaa/2QtWxSKgKvGn+Qs7iM0moCnRdPsHWFxEQENi5t8rYA3MAt9YJCZsu8UKkhAW SJDonDeFCcTmFbCVON31lAVi6lVGiSNbTjJCJAQlfky+xwJiMwtoSazfeZwJwpaWePR3Btg2 TgE3iYPvL4LViwqoSMy6PIdlAqPALCTts5C0z0LSvoCReRWjRGpBckFxUnquUV5quV5xYm5x aV66XnJ+7iZGcMp4Jr2D8fAu90OMAhyMSjy8DxKlIoRYE8uKK3MPMUpwMCuJ8DZpSUcI8aYk VlalFuXHF5XmpBYfYjQFBslEZinR5HxgOssriTc0MTcxNzawMLe0NDFSEudtnP0sXEggPbEk NTs1tSC1CKaPiYNTqoFRKHvmtTkNSxy3JHaKnWAScDG/zzzn4I3Q1z+jDO8fTZA3iN3bt+/f 4VvTo7peuumscrVbuv1ucXJD9vzMt3lWt2RTVVoZ+rNf7eiT3v1IUXamUGaysrJ91Iq9vpPv H3+yL0TZ7dOFrTq3DvPPkHg47zj/jt6wr5l9j8MWKXwxNf5XO1m7zeOgEktxRqKhFnNRcSIA lDOVzi8DAAA= X-MTR: 20000000000000000@CPGS Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Chanwoo, Tested-by: Andi Shyti Andi On Thu, Nov 03, 2016 at 03:39:07PM +0900, Chanwoo Choi wrote: > This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on > Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports > PSCI (Power State Coordination Interface) v0.1. > > This patch includes following Device Tree node to support Exynos5433 SoC: > 1. Octa cores for big.LITTLE architecture > - Cortex-A53 LITTLE Quad-core > - Cortex-A57 big Quad-core > - Support PSCI v0.1 > > 2. Clock controller node > - CMU_TOP : clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS > - CMU_CPIF : clocks for LLI (Low Latency Interface) > - CMU_MIF : clocks for DRAM Memory Controller > - CMU_PERIC : clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS > - CMU_PERIS : clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC > - CMU_FSYS : clocks for USB/UFS/SDMMC/TSI/PDMA > - CMU_G2D : clocks for G2D/MDMA > - CMU_DISP : clocks for DECON/HDMI/DSIM/MIXER > - CMU_AUD : clocks for Cortex-A5/BUS/AUDIO > - CMU_BUS{0|1|2} : clocks for global data buses and global peripheral buses > - CMU_G3D : clocks for 3D Graphics Engine > - CMU_GSCL : clocks for GSCALER > - CMU_APOLLO: clocks for Cortex-A53 Quad-core processor. > - CMU_ATLAS : clocks for Cortex-A57 Quad-core processor, > CoreSight and L2 cache controller. > - CMU_MSCL : clocks for M2M (Memory to Memory) scaler and JPEG IPs. > - CMU_MFC : clocks for MFC (Multi-Format Codec) IP. > - CMU_HEVC : clocks for HEVC(High Efficiency Video Codec) decoder IP. > - CMU_ISP : clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. > - CMU_CAM0 : clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs. > - CMU_CAM1 : clocks for COrtex-A5/MIPI_CSIS2/FIMC_LITE_C/FIMC-FD IPs. > > 3. pinctrl node for GPIO > - alive/aud/cpif/ese/finger/fsys/imem/nfc/peric/touch pad > > 4. Timer > - ARM architecture timer (armv8-timer) > - MCT (Multi Core Timer) timer > > 5. Interrupt controller (GIC-400) > > 6. BUS devices > - HS-I2C (High-Speed I2C) device > - SPI (Serial Peripheral Interface) device > > 7. Sound devices > - I2S bus > - LPASS (Low Power Audio Subsystem) > > 8. Power management devices > - CPUFREQ for for Cortex-A53/A57 > - TMU (Thermal Management Unit) for Cortex-A53/A57, G3D, ISP > > 9. Display controller devices > - DECON (Display and enhancement controller) for panel output > - DSI (Display Serial Interface) > - MIC (Mobile Image Compressor) > > 10. USB > - USB 3.0 DRD (Dual Role Device) controller > - USB 3.0 Host controller > > 11. Storage devices > - MSHC (Mobile Storage Host Controller) > > 12. Misc devices > - UART device > - ADC (Analog Digital Converter) > - PWM (Pulse Width Modulation) > - ADMA (Advanced DMA) and PDMA (Peripheral DMA) > > Signed-off-by: Chanwoo Choi > Signed-off-by: Jaehoon Chung > Signed-off-by: Seung-Woo Kim > Signed-off-by: Joonyoung Shim > Signed-off-by: Inki Dae > Signed-off-by: Jonghwa Lee > Signed-off-by: Beomho Seo > Signed-off-by: Jaewon Kim > Signed-off-by: Hyungwon Hwang > Signed-off-by: Inha Song > Signed-off-by: Ingi kim > Signed-off-by: Krzysztof Kozlowski > Signed-off-by: Marek Szyprowski > Signed-off-by: Andrzej Hajda > Signed-off-by: Sylwester Nawrocki > Reviewed-by: Javier Martinez Canillas > --- > arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 794 ++++++++++++ > .../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 23 + > .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 + > arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 296 +++++ > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1356 ++++++++++++++++++++ > 5 files changed, 2491 insertions(+) > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > new file mode 100644 > index 000000000000..796881310bf6 > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > @@ -0,0 +1,794 @@ > +/* > + * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source > + * > + * Copyright (c) 2016 Samsung Electronics Co., Ltd. > + * Chanwoo Choi > + * > + * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device > + * tree nodes are listed in this file. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#define PIN_PULL_NONE 0 > +#define PIN_PULL_DOWN 1 > +#define PIN_PULL_UP 3 > + > +#define PIN_DRV_LV1 0 > +#define PIN_DRV_LV2 2 > +#define PIN_DRV_LV3 1 > +#define PIN_DRV_LV4 3 > + > +#define PIN_IN 0 > +#define PIN_OUT 1 > +#define PIN_FUNC1 2 > + > +#define PIN(_func, _pin, _pull, _drv) \ > + _pin { \ > + samsung,pins = #_pin; \ > + samsung,pin-function = ; \ > + samsung,pin-pud = ; \ > + samsung,pin-drv = ; \ > + } > + > +&pinctrl_alive { > + gpa0: gpa0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + interrupt-parent = <&gic>; > + interrupts = , , , > + , , , > + , ; > + #interrupt-cells = <2>; > + }; > + > + gpa1: gpa1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + interrupt-parent = <&gic>; > + interrupts = , , , > + , , , > + , ; > + #interrupt-cells = <2>; > + }; > + > + gpa2: gpa2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpa3: gpa3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf1: gpf1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf2: gpf2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf3: gpf3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf4: gpf4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf5: gpf5 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +&pinctrl_aud { > + gpz0: gpz0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpz1: gpz1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + i2s0_bus: i2s0-bus { > + samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3", > + "gpz0-4", "gpz0-5", "gpz0-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + pcm0_bus: pcm0-bus { > + samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + uart_aud_bus: uart-aud-bus { > + samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > +}; > + > +&pinctrl_cpif { > + gpv6: gpv6 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +&pinctrl_ese { > + gpj2: gpj2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +&pinctrl_finger { > + gpd5: gpd5 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + spi2_bus: spi2-bus { > + samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c6_bus: hs-i2c6-bus { > + samsung,pins = "gpd5-3", "gpd5-2"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > +}; > + > +&pinctrl_fsys { > + gph1: gph1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr4: gpr4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr0: gpr0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr1: gpr1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr2: gpr2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr3: gpr3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + sd0_clk: sd0-clk { > + samsung,pins = "gpr0-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_cmd: sd0-cmd { > + samsung,pins = "gpr0-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_rdqs: sd0-rdqs { > + samsung,pins = "gpr0-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_qrdy: sd0-qrdy { > + samsung,pins = "gpr0-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus1: sd0-bus-width1 { > + samsung,pins = "gpr1-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus4: sd0-bus-width4 { > + samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus8: sd0-bus-width8 { > + samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_clk: sd1-clk { > + samsung,pins = "gpr2-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_cmd: sd1-cmd { > + samsung,pins = "gpr2-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus1: sd1-bus-width1 { > + samsung,pins = "gpr3-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus4: sd1-bus-width4 { > + samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus8: sd1-bus-width8 { > + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + pcie_bus: pcie_bus { > + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + }; > + > + sd2_clk: sd2-clk { > + samsung,pins = "gpr4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_cmd: sd2-cmd { > + samsung,pins = "gpr4-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_cd: sd2-cd { > + samsung,pins = "gpr4-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_bus1: sd2-bus-width1 { > + samsung,pins = "gpr4-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_bus4: sd2-bus-width4 { > + samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_clk_output: sd2-clk-output { > + samsung,pins = "gpr4-0"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <2>; > + }; > + > + sd2_cmd_output: sd2-cmd-output { > + samsung,pins = "gpr4-1"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <2>; > + }; > +}; > + > +&pinctrl_imem { > + gpf0: gpf0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +&pinctrl_nfc { > + gpj0: gpj0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + hs_i2c4_bus: hs-i2c4-bus { > + samsung,pins = "gpj0-1", "gpj0-0"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > +}; > + > +&pinctrl_peric { > + gpv7: gpv7 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb0: gpb0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc0: gpc0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc1: gpc1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc2: gpc2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc3: gpc3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg0: gpg0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd0: gpd0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd1: gpd1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd2: gpd2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd4: gpd4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd8: gpd8 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd6: gpd6 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd7: gpd7 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg1: gpg1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg2: gpg2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg3: gpg3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + hs_i2c8_bus: hs-i2c8-bus { > + samsung,pins = "gpb0-1", "gpb0-0"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c9_bus: hs-i2c9-bus { > + samsung,pins = "gpb0-3", "gpb0-2"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + i2s1_bus: i2s1-bus { > + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", > + "gpd4-3", "gpd4-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + pcm1_bus: pcm1-bus { > + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", > + "gpd4-3", "gpd4-4"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + spdif_bus: spdif-bus { > + samsung,pins = "gpd4-3", "gpd4-4"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_spi_pin0: fimc-is-spi-pin0 { > + samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_spi_pin1: fimc-is-spi-pin1 { > + samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + uart0_bus: uart0-bus { > + samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + hs_i2c2_bus: hs-i2c2-bus { > + samsung,pins = "gpd0-3", "gpd0-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + uart2_bus: uart2-bus { > + samsung,pins = "gpd1-5", "gpd1-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + uart1_bus: uart1-bus { > + samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + hs_i2c3_bus: hs-i2c3-bus { > + samsung,pins = "gpd1-3", "gpd1-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c0_bus: hs-i2c0-bus { > + samsung,pins = "gpd2-1", "gpd2-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c1_bus: hs-i2c1-bus { > + samsung,pins = "gpd2-3", "gpd2-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + pwm0_out: pwm0-out { > + samsung,pins = "gpd2-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + pwm1_out: pwm1-out { > + samsung,pins = "gpd2-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + pwm2_out: pwm2-out { > + samsung,pins = "gpd2-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + pwm3_out: pwm3-out { > + samsung,pins = "gpd2-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + spi1_bus: spi1-bus { > + samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c7_bus: hs-i2c7-bus { > + samsung,pins = "gpd2-7", "gpd2-6"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + spi0_bus: spi0-bus { > + samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c10_bus: hs-i2c10-bus { > + samsung,pins = "gpg3-1", "gpg3-0"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c11_bus: hs-i2c11-bus { > + samsung,pins = "gpg3-3", "gpg3-2"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + spi3_bus: spi3-bus { > + samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + spi4_bus: spi4-bus { > + samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_uart: fimc-is-uart { > + samsung,pins = "gpc1-1", "gpc0-7"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch0_i2c: fimc-is-ch0_i2c { > + samsung,pins = "gpc2-1", "gpc2-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch0_mclk: fimc-is-ch0_mclk { > + samsung,pins = "gpd7-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch1_i2c: fimc-is-ch1-i2c { > + samsung,pins = "gpc2-3", "gpc2-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch1_mclk: fimc-is-ch1-mclk { > + samsung,pins = "gpd7-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch2_i2c: fimc-is-ch2-i2c { > + samsung,pins = "gpc2-5", "gpc2-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch2_mclk: fimc-is-ch2-mclk { > + samsung,pins = "gpd7-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > +}; > + > +&pinctrl_touch { > + gpj1: gpj1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + hs_i2c5_bus: hs-i2c5-bus { > + samsung,pins = "gpj1-1", "gpj1-0"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi > new file mode 100644 > index 000000000000..9be2978f1b9a > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi > @@ -0,0 +1,23 @@ > +/* > + * Device tree sources for Exynos5433 TMU sensor configuration > + * > + * Copyright (c) 2016 Jonghwa Lee > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include > + > +#thermal-sensor-cells = <0>; > +samsung,tmu_gain = <8>; > +samsung,tmu_reference_voltage = <23>; > +samsung,tmu_noise_cancel_mode = <4>; > +samsung,tmu_efuse_value = <75>; > +samsung,tmu_min_efuse_value = <40>; > +samsung,tmu_max_efuse_value = <150>; > +samsung,tmu_first_point_trim = <25>; > +samsung,tmu_second_point_trim = <85>; > +samsung,tmu_default_temp_offset = <50>; > +samsung,tmu_mux_addr = <6>; > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi > new file mode 100644 > index 000000000000..125fe58d77ce > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi > @@ -0,0 +1,22 @@ > +/* > + * Device tree sources for Exynos5433 TMU sensor configuration > + * > + * Copyright (c) 2016 Chanwoo Choi > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include > + > +#thermal-sensor-cells = <0>; > +samsung,tmu_gain = <8>; > +samsung,tmu_reference_voltage = <16>; > +samsung,tmu_noise_cancel_mode = <4>; > +samsung,tmu_efuse_value = <75>; > +samsung,tmu_min_efuse_value = <40>; > +samsung,tmu_max_efuse_value = <150>; > +samsung,tmu_first_point_trim = <25>; > +samsung,tmu_second_point_trim = <85>; > +samsung,tmu_default_temp_offset = <50>; > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi > new file mode 100644 > index 000000000000..ceaa05145b8a > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi > @@ -0,0 +1,296 @@ > +/* > + * Device tree sources for Exynos5433 thermal zone > + * > + * Copyright (c) 2016 Chanwoo Choi > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include > + > +/ { > +thermal-zones { > + atlas0_thermal: atlas0-thermal { > + thermal-sensors = <&tmu_atlas0>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + atlas0_alert_0: atlas0-alert-0 { > + temperature = <65000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_1: atlas0-alert-1 { > + temperature = <70000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_2: atlas0-alert-2 { > + temperature = <75000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_3: atlas0-alert-3 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_4: atlas0-alert-4 { > + temperature = <85000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_5: atlas0-alert-5 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_6: atlas0-alert-6 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + > + cooling-maps { > + map0 { > + /* Set maximum frequency as 1800MHz */ > + trip = <&atlas0_alert_0>; > + cooling-device = <&cpu4 1 2>; > + }; > + map1 { > + /* Set maximum frequency as 1700MHz */ > + trip = <&atlas0_alert_1>; > + cooling-device = <&cpu4 2 3>; > + }; > + map2 { > + /* Set maximum frequency as 1600MHz */ > + trip = <&atlas0_alert_2>; > + cooling-device = <&cpu4 3 4>; > + }; > + map3 { > + /* Set maximum frequency as 1500MHz */ > + trip = <&atlas0_alert_3>; > + cooling-device = <&cpu4 4 5>; > + }; > + map4 { > + /* Set maximum frequency as 1400MHz */ > + trip = <&atlas0_alert_4>; > + cooling-device = <&cpu4 5 7>; > + }; > + map5 { > + /* Set maximum frequencyas 1200MHz */ > + trip = <&atlas0_alert_5>; > + cooling-device = <&cpu4 7 9>; > + }; > + map6 { > + /* Set maximum frequency as 1000MHz */ > + trip = <&atlas0_alert_6>; > + cooling-device = <&cpu4 9 14>; > + }; > + }; > + }; > + > + atlas1_thermal: atlas1-thermal { > + thermal-sensors = <&tmu_atlas1>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + atlas1_alert_0: atlas1-alert-0 { > + temperature = <65000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_1: atlas1-alert-1 { > + temperature = <70000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_2: atlas1-alert-2 { > + temperature = <75000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_3: atlas1-alert-3 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_4: atlas1-alert-4 { > + temperature = <85000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_5: atlas1-alert-5 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_6: atlas1-alert-6 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + }; > + > + g3d_thermal: g3d-thermal { > + thermal-sensors = <&tmu_g3d>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + g3d_alert_0: g3d-alert-0 { > + temperature = <70000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_1: g3d-alert-1 { > + temperature = <75000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_2: g3d-alert-2 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_3: g3d-alert-3 { > + temperature = <85000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_4: g3d-alert-4 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_5: g3d-alert-5 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_6: g3d-alert-6 { > + temperature = <100000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + }; > + > + apollo_thermal: apollo-thermal { > + thermal-sensors = <&tmu_apollo>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + apollo_alert_0: apollo-alert-0 { > + temperature = <65000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_1: apollo-alert-1 { > + temperature = <70000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_2: apollo-alert-2 { > + temperature = <75000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_3: apollo-alert-3 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_4: apollo-alert-4 { > + temperature = <85000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_5: apollo-alert-5 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_6: apollo-alert-6 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + > + cooling-maps { > + map0 { > + /* Set maximum frequency as 1200MHz */ > + trip = <&apollo_alert_2>; > + cooling-device = <&cpu0 1 2>; > + }; > + map1 { > + /* Set maximum frequency as 1100MHz */ > + trip = <&apollo_alert_3>; > + cooling-device = <&cpu0 2 3>; > + }; > + map2 { > + /* Set maximum frequency as 1000MHz */ > + trip = <&apollo_alert_4>; > + cooling-device = <&cpu0 3 4>; > + }; > + map3 { > + /* Set maximum frequency as 900MHz */ > + trip = <&apollo_alert_5>; > + cooling-device = <&cpu0 4 5>; > + }; > + map4 { > + /* Set maximum frequency as 800MHz */ > + trip = <&apollo_alert_6>; > + cooling-device = <&cpu0 5 9>; > + }; > + }; > + }; > + > + isp_thermal: isp-thermal { > + thermal-sensors = <&tmu_isp>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + isp_alert_0: isp-alert-0 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_1: isp-alert-1 { > + temperature = <85000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_2: isp-alert-2 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_3: isp-alert-3 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_4: isp-alert-4 { > + temperature = <100000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_5: isp-alert-5 { > + temperature = <105000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_6: isp-alert-6 { > + temperature = <110000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + }; > +}; > +}; > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > new file mode 100644 > index 000000000000..1188630823a7 > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -0,0 +1,1356 @@ > +/* > + * Samsung's Exynos5433 SoC device tree source > + * > + * Copyright (c) 2016 Samsung Electronics Co., Ltd. > + * > + * Samsung's Exynos5433 SoC device nodes are listed in this file. > + * Exynos5433 based board files can include this file and provide > + * values for board specific bindings. > + * > + * Note: This file does not include device nodes for all the controllers in > + * Exynos5433 SoC. As device tree coverage for Exynos5433 increases, > + * additional nodes can be added to this file. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include > +#include > + > +/ { > + compatible = "samsung,exynos5433"; > + #address-cells = <2>; > + #size-cells = <2>; > + > + interrupt-parent = <&gic>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu0: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x100>; > + clock-frequency = <1300000000>; > + clocks = <&cmu_apollo CLK_SCLK_APOLLO>; > + clock-names = "apolloclk"; > + operating-points-v2 = <&cluster_a53_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu1: cpu@101 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x101>; > + clock-frequency = <1300000000>; > + operating-points-v2 = <&cluster_a53_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu2: cpu@102 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x102>; > + clock-frequency = <1300000000>; > + operating-points-v2 = <&cluster_a53_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu3: cpu@103 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x103>; > + clock-frequency = <1300000000>; > + operating-points-v2 = <&cluster_a53_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu4: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0>; > + clock-frequency = <1900000000>; > + clocks = <&cmu_atlas CLK_SCLK_ATLAS>; > + clock-names = "atlasclk"; > + operating-points-v2 = <&cluster_a57_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu5: cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x1>; > + clock-frequency = <1900000000>; > + operating-points-v2 = <&cluster_a57_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu6: cpu@2 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x2>; > + clock-frequency = <1900000000>; > + operating-points-v2 = <&cluster_a57_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu7: cpu@3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x3>; > + clock-frequency = <1900000000>; > + operating-points-v2 = <&cluster_a57_opp_table>; > + #cooling-cells = <2>; > + }; > + }; > + > + cluster_a53_opp_table: opp_table0 { > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp@400000000 { > + opp-hz = /bits/ 64 <400000000>; > + opp-microvolt = <900000>; > + }; > + opp@500000000 { > + opp-hz = /bits/ 64 <500000000>; > + opp-microvolt = <925000>; > + }; > + opp@600000000 { > + opp-hz = /bits/ 64 <600000000>; > + opp-microvolt = <950000>; > + }; > + opp@700000000 { > + opp-hz = /bits/ 64 <700000000>; > + opp-microvolt = <975000>; > + }; > + opp@800000000 { > + opp-hz = /bits/ 64 <800000000>; > + opp-microvolt = <1000000>; > + }; > + opp@900000000 { > + opp-hz = /bits/ 64 <900000000>; > + opp-microvolt = <1050000>; > + }; > + opp@1000000000 { > + opp-hz = /bits/ 64 <1000000000>; > + opp-microvolt = <1075000>; > + }; > + opp@1100000000 { > + opp-hz = /bits/ 64 <1100000000>; > + opp-microvolt = <1112500>; > + }; > + opp@1200000000 { > + opp-hz = /bits/ 64 <1200000000>; > + opp-microvolt = <1112500>; > + }; > + opp@1300000000 { > + opp-hz = /bits/ 64 <1300000000>; > + opp-microvolt = <1150000>; > + }; > + }; > + > + cluster_a57_opp_table: opp_table1 { > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp@500000000 { > + opp-hz = /bits/ 64 <500000000>; > + opp-microvolt = <900000>; > + }; > + opp@600000000 { > + opp-hz = /bits/ 64 <600000000>; > + opp-microvolt = <900000>; > + }; > + opp@700000000 { > + opp-hz = /bits/ 64 <700000000>; > + opp-microvolt = <912500>; > + }; > + opp@800000000 { > + opp-hz = /bits/ 64 <800000000>; > + opp-microvolt = <912500>; > + }; > + opp@900000000 { > + opp-hz = /bits/ 64 <900000000>; > + opp-microvolt = <937500>; > + }; > + opp@1000000000 { > + opp-hz = /bits/ 64 <1000000000>; > + opp-microvolt = <975000>; > + }; > + opp@1100000000 { > + opp-hz = /bits/ 64 <1100000000>; > + opp-microvolt = <1012500>; > + }; > + opp@1200000000 { > + opp-hz = /bits/ 64 <1200000000>; > + opp-microvolt = <1037500>; > + }; > + opp@1300000000 { > + opp-hz = /bits/ 64 <1300000000>; > + opp-microvolt = <1062500>; > + }; > + opp@1400000000 { > + opp-hz = /bits/ 64 <1400000000>; > + opp-microvolt = <1087500>; > + }; > + opp@1500000000 { > + opp-hz = /bits/ 64 <1500000000>; > + opp-microvolt = <1125000>; > + }; > + opp@1600000000 { > + opp-hz = /bits/ 64 <1600000000>; > + opp-microvolt = <1137500>; > + }; > + opp@1700000000 { > + opp-hz = /bits/ 64 <1700000000>; > + opp-microvolt = <1175000>; > + }; > + opp@1800000000 { > + opp-hz = /bits/ 64 <1800000000>; > + opp-microvolt = <1212500>; > + }; > + opp@1900000000 { > + opp-hz = /bits/ 64 <1900000000>; > + opp-microvolt = <1262500>; > + }; > + }; > + > + psci { > + compatible = "arm,psci"; > + method = "smc"; > + cpu_off = <0x84000002>; > + cpu_on = <0xC4000003>; > + }; > + > + reboot: syscon-reboot { > + compatible = "syscon-reboot"; > + regmap = <&pmu_system_controller>; > + offset = <0x400>; /* SWRESET */ > + mask = <0x1>; > + }; > + > + soc: soc { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x0 0x0 0x18000000>; > + > + chipid@10000000 { > + compatible = "samsung,exynos4210-chipid"; > + reg = <0x10000000 0x100>; > + }; > + > + xxti: xxti { > + compatible = "fixed-clock"; > + clock-output-names = "oscclk"; > + #clock-cells = <0>; > + }; > + > + cmu_top: clock-controller@10030000 { > + compatible = "samsung,exynos5433-cmu-top"; > + reg = <0x10030000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_mphy_pll", > + "sclk_mfc_pll", > + "sclk_bus_pll"; > + clocks = <&xxti>, > + <&cmu_cpif CLK_SCLK_MPHY_PLL>, > + <&cmu_mif CLK_SCLK_MFC_PLL>, > + <&cmu_mif CLK_SCLK_BUS_PLL>; > + }; > + > + cmu_cpif: clock-controller@10fc0000 { > + compatible = "samsung,exynos5433-cmu-cpif"; > + reg = <0x10fc0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk"; > + clocks = <&xxti>; > + }; > + > + cmu_mif: clock-controller@105b0000 { > + compatible = "samsung,exynos5433-cmu-mif"; > + reg = <0x105b0000 0x2000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_mphy_pll"; > + clocks = <&xxti>, > + <&cmu_cpif CLK_SCLK_MPHY_PLL>; > + }; > + > + cmu_peric: clock-controller@14c80000 { > + compatible = "samsung,exynos5433-cmu-peric"; > + reg = <0x14c80000 0x1000>; > + #clock-cells = <1>; > + }; > + > + cmu_peris: clock-controller@0x10040000 { > + compatible = "samsung,exynos5433-cmu-peris"; > + reg = <0x10040000 0x1000>; > + #clock-cells = <1>; > + }; > + > + cmu_fsys: clock-controller@156e0000 { > + compatible = "samsung,exynos5433-cmu-fsys"; > + reg = <0x156e0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_ufs_mphy", > + "div_aclk_fsys_200", > + "sclk_pcie_100_fsys", > + "sclk_ufsunipro_fsys", > + "sclk_mmc2_fsys", > + "sclk_mmc1_fsys", > + "sclk_mmc0_fsys", > + "sclk_usbhost30_fsys", > + "sclk_usbdrd30_fsys"; > + clocks = <&xxti>, > + <&cmu_cpif CLK_SCLK_UFS_MPHY>, > + <&cmu_top CLK_DIV_ACLK_FSYS_200>, > + <&cmu_top CLK_SCLK_PCIE_100_FSYS>, > + <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>, > + <&cmu_top CLK_SCLK_MMC2_FSYS>, > + <&cmu_top CLK_SCLK_MMC1_FSYS>, > + <&cmu_top CLK_SCLK_MMC0_FSYS>, > + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, > + <&cmu_top CLK_SCLK_USBDRD30_FSYS>; > + }; > + > + cmu_g2d: clock-controller@12460000 { > + compatible = "samsung,exynos5433-cmu-g2d"; > + reg = <0x12460000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "aclk_g2d_266", > + "aclk_g2d_400"; > + clocks = <&xxti>, > + <&cmu_top CLK_ACLK_G2D_266>, > + <&cmu_top CLK_ACLK_G2D_400>; > + }; > + > + cmu_disp: clock-controller@13b90000 { > + compatible = "samsung,exynos5433-cmu-disp"; > + reg = <0x13b90000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_dsim1_disp", > + "sclk_dsim0_disp", > + "sclk_dsd_disp", > + "sclk_decon_tv_eclk_disp", > + "sclk_decon_vclk_disp", > + "sclk_decon_eclk_disp", > + "sclk_decon_tv_vclk_disp", > + "aclk_disp_333"; > + clocks = <&xxti>, > + <&cmu_mif CLK_SCLK_DSIM1_DISP>, > + <&cmu_mif CLK_SCLK_DSIM0_DISP>, > + <&cmu_mif CLK_SCLK_DSD_DISP>, > + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, > + <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>, > + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, > + <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, > + <&cmu_mif CLK_ACLK_DISP_333>; > + }; > + > + cmu_aud: clock-controller@114c0000 { > + compatible = "samsung,exynos5433-cmu-aud"; > + reg = <0x114c0000 0x1000>; > + #clock-cells = <1>; > + }; > + > + cmu_bus0: clock-controller@13600000 { > + compatible = "samsung,exynos5433-cmu-bus0"; > + reg = <0x13600000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "aclk_bus0_400"; > + clocks = <&cmu_top CLK_ACLK_BUS0_400>; > + }; > + > + cmu_bus1: clock-controller@14800000 { > + compatible = "samsung,exynos5433-cmu-bus1"; > + reg = <0x14800000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "aclk_bus1_400"; > + clocks = <&cmu_top CLK_ACLK_BUS1_400>; > + }; > + > + cmu_bus2: clock-controller@13400000 { > + compatible = "samsung,exynos5433-cmu-bus2"; > + reg = <0x13400000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "aclk_bus2_400"; > + clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>; > + }; > + > + cmu_g3d: clock-controller@14aa0000 { > + compatible = "samsung,exynos5433-cmu-g3d"; > + reg = <0x14aa0000 0x2000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "aclk_g3d_400"; > + clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; > + }; > + > + cmu_gscl: clock-controller@13cf0000 { > + compatible = "samsung,exynos5433-cmu-gscl"; > + reg = <0x13cf0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "aclk_gscl_111", > + "aclk_gscl_333"; > + clocks = <&xxti>, > + <&cmu_top CLK_ACLK_GSCL_111>, > + <&cmu_top CLK_ACLK_GSCL_333>; > + }; > + > + cmu_apollo: clock-controller@11900000 { > + compatible = "samsung,exynos5433-cmu-apollo"; > + reg = <0x11900000 0x2000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "sclk_bus_pll_apollo"; > + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>; > + }; > + > + cmu_atlas: clock-controller@11800000 { > + compatible = "samsung,exynos5433-cmu-atlas"; > + reg = <0x11800000 0x2000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "sclk_bus_pll_atlas"; > + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; > + }; > + > + cmu_mscl: clock-controller@105d0000 { > + compatible = "samsung,exynos5433-cmu-mscl"; > + reg = <0x150d0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_jpeg_mscl", > + "aclk_mscl_400"; > + clocks = <&xxti>, > + <&cmu_top CLK_SCLK_JPEG_MSCL>, > + <&cmu_top CLK_ACLK_MSCL_400>; > + }; > + > + cmu_mfc: clock-controller@15280000 { > + compatible = "samsung,exynos5433-cmu-mfc"; > + reg = <0x15280000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "aclk_mfc_400"; > + clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; > + }; > + > + cmu_hevc: clock-controller@14f80000 { > + compatible = "samsung,exynos5433-cmu-hevc"; > + reg = <0x14f80000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "aclk_hevc_400"; > + clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; > + }; > + > + cmu_isp: clock-controller@146d0000 { > + compatible = "samsung,exynos5433-cmu-isp"; > + reg = <0x146d0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "aclk_isp_dis_400", > + "aclk_isp_400"; > + clocks = <&xxti>, > + <&cmu_top CLK_ACLK_ISP_DIS_400>, > + <&cmu_top CLK_ACLK_ISP_400>; > + }; > + > + cmu_cam0: clock-controller@120d0000 { > + compatible = "samsung,exynos5433-cmu-cam0"; > + reg = <0x120d0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "aclk_cam0_333", > + "aclk_cam0_400", > + "aclk_cam0_552"; > + clocks = <&xxti>, > + <&cmu_top CLK_ACLK_CAM0_333>, > + <&cmu_top CLK_ACLK_CAM0_400>, > + <&cmu_top CLK_ACLK_CAM0_552>; > + }; > + > + cmu_cam1: clock-controller@145d0000 { > + compatible = "samsung,exynos5433-cmu-cam1"; > + reg = <0x145d0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_isp_uart_cam1", > + "sclk_isp_spi1_cam1", > + "sclk_isp_spi0_cam1", > + "aclk_cam1_333", > + "aclk_cam1_400", > + "aclk_cam1_552"; > + clocks = <&xxti>, > + <&cmu_top CLK_SCLK_ISP_UART_CAM1>, > + <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>, > + <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>, > + <&cmu_top CLK_ACLK_CAM1_333>, > + <&cmu_top CLK_ACLK_CAM1_400>, > + <&cmu_top CLK_ACLK_CAM1_552>; > + }; > + > + tmu_atlas0: tmu@10060000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x10060000 0x200>; > + interrupts = ; > + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, > + <&cmu_peris CLK_SCLK_TMU0>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + tmu_atlas1: tmu@10068000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x10068000 0x200>; > + interrupts = ; > + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, > + <&cmu_peris CLK_SCLK_TMU0>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + tmu_g3d: tmu@10070000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x10070000 0x200>; > + interrupts = ; > + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, > + <&cmu_peris CLK_SCLK_TMU1>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-g3d-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + tmu_apollo: tmu@10078000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x10078000 0x200>; > + interrupts = ; > + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, > + <&cmu_peris CLK_SCLK_TMU1>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + tmu_isp: tmu@1007c000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x1007c000 0x200>; > + interrupts = ; > + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, > + <&cmu_peris CLK_SCLK_TMU1>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + mct@101c0000 { > + compatible = "samsung,exynos4210-mct"; > + reg = <0x101c0000 0x800>; > + interrupts = , , > + , , > + , , > + , , > + , , > + , ; > + clocks = <&xxti>, <&cmu_peris CLK_PCLK_MCT>; > + clock-names = "fin_pll", "mct"; > + }; > + > + pinctrl_alive: pinctrl@10580000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x10580000 0x1a20>, <0x11090000 0x100>; > + > + wakeup-interrupt-controller { > + compatible = "samsung,exynos7-wakeup-eint"; > + interrupts = ; > + }; > + }; > + > + pinctrl_aud: pinctrl@114b0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x114b0000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_cpif: pinctrl@10fe0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x10fe0000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_ese: pinctrl@14ca0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14ca0000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_finger: pinctrl@14cb0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14cb0000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_fsys: pinctrl@15690000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x15690000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_imem: pinctrl@11090000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x11090000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_nfc: pinctrl@14cd0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14cd0000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_peric: pinctrl@14cc0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14cc0000 0x1100>; > + interrupts = ; > + }; > + > + pinctrl_touch: pinctrl@14ce0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14ce0000 0x1100>; > + interrupts = ; > + }; > + > + pmu_system_controller: system-controller@105c0000 { > + compatible = "samsung,exynos5433-pmu", "syscon"; > + reg = <0x105c0000 0x5008>; > + #clock-cells = <1>; > + clock-names = "clkout16"; > + clocks = <&xxti>; > + }; > + > + gic: interrupt-controller@11001000 { > + compatible = "arm,gic-400"; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x11001000 0x1000>, > + <0x11002000 0x2000>, > + <0x11004000 0x2000>, > + <0x11006000 0x2000>; > + interrupts = ; > + }; > + > + mipi_phy: video-phy@105c0710 { > + compatible = "samsung,exynos5433-mipi-video-phy"; > + #phy-cells = <1>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + samsung,cam0-sysreg = <&syscon_cam0>; > + samsung,cam1-sysreg = <&syscon_cam1>; > + samsung,disp-sysreg = <&syscon_disp>; > + }; > + > + decon: decon@13800000 { > + compatible = "samsung,exynos5433-decon"; > + reg = <0x13800000 0x2104>; > + clocks = <&cmu_disp CLK_PCLK_DECON>, > + <&cmu_disp CLK_ACLK_DECON>, > + <&cmu_disp CLK_ACLK_SMMU_DECON0X>, > + <&cmu_disp CLK_ACLK_XIU_DECON0X>, > + <&cmu_disp CLK_PCLK_SMMU_DECON0X>, > + <&cmu_disp CLK_SCLK_DECON_VCLK>, > + <&cmu_disp CLK_SCLK_DECON_ECLK>; > + clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", > + "aclk_xiu_decon0x", "pclk_smmu_decon0x", > + "sclk_decon_vclk", "sclk_decon_eclk"; > + interrupt-names = "fifo", "vsync", "lcd_sys"; > + interrupts = , , > + ; > + samsung,disp-sysreg = <&syscon_disp>; > + status = "disabled"; > + iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>; > + iommu-names = "m0", "m1"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + decon_to_mic: endpoint { > + remote-endpoint = > + <&mic_to_decon>; > + }; > + }; > + }; > + }; > + > + dsi: dsi@13900000 { > + compatible = "samsung,exynos5433-mipi-dsi"; > + reg = <0x13900000 0xC0>; > + interrupts = ; > + phys = <&mipi_phy 1>; > + phy-names = "dsim"; > + clocks = <&cmu_disp CLK_PCLK_DSIM0>, > + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>, > + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>, > + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>, > + <&cmu_disp CLK_SCLK_DSIM0>; > + clock-names = "bus_clk", > + "phyclk_mipidphy0_bitclkdiv8", > + "phyclk_mipidphy0_rxclkesc0", > + "sclk_rgb_vclk_to_dsim0", > + "sclk_mipi"; > + status = "disabled"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dsi_to_mic: endpoint { > + remote-endpoint = <&mic_to_dsi>; > + }; > + }; > + }; > + }; > + > + mic: mic@13930000 { > + compatible = "samsung,exynos5433-mic"; > + reg = <0x13930000 0x48>; > + clocks = <&cmu_disp CLK_PCLK_MIC0>, > + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; > + clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; > + samsung,disp-syscon = <&syscon_disp>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + mic_to_decon: endpoint { > + remote-endpoint = > + <&decon_to_mic>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + mic_to_dsi: endpoint { > + remote-endpoint = <&dsi_to_mic>; > + }; > + }; > + }; > + }; > + > + syscon_disp: syscon@13b80000 { > + compatible = "syscon"; > + reg = <0x13b80000 0x1010>; > + }; > + > + syscon_cam0: syscon@120f0000 { > + compatible = "syscon"; > + reg = <0x120f0000 0x1020>; > + }; > + > + syscon_cam1: syscon@145f0000 { > + compatible = "syscon"; > + reg = <0x145f0000 0x1038>; > + }; > + > + sysmmu_decon0x: sysmmu@0x13a00000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x13a00000 0x1000>; > + interrupts = ; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>, > + <&cmu_disp CLK_ACLK_SMMU_DECON0X>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_decon1x: sysmmu@0x13a10000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x13a10000 0x1000>; > + interrupts = ; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>, > + <&cmu_disp CLK_ACLK_SMMU_DECON1X>; > + #iommu-cells = <0>; > + }; > + > + serial_0: serial@14c10000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x14c10000 0x100>; > + interrupts = ; > + clocks = <&cmu_peric CLK_PCLK_UART0>, > + <&cmu_peric CLK_SCLK_UART0>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_bus>; > + status = "disabled"; > + }; > + > + serial_1: serial@14c20000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x14c20000 0x100>; > + interrupts = ; > + clocks = <&cmu_peric CLK_PCLK_UART1>, > + <&cmu_peric CLK_SCLK_UART1>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart1_bus>; > + status = "disabled"; > + }; > + > + serial_2: serial@14c30000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x14c30000 0x100>; > + interrupts = ; > + clocks = <&cmu_peric CLK_PCLK_UART2>, > + <&cmu_peric CLK_SCLK_UART2>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart2_bus>; > + status = "disabled"; > + }; > + > + spi_0: spi@14d20000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d20000 0x100>; > + interrupts = ; > + dmas = <&pdma0 9>, <&pdma0 8>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI0>, > + <&cmu_peric CLK_SCLK_SPI0>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI0>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi0_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + spi_1: spi@14d30000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d30000 0x100>; > + interrupts = ; > + dmas = <&pdma0 11>, <&pdma0 10>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI1>, > + <&cmu_peric CLK_SCLK_SPI1>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI1>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi1_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + spi_2: spi@14d40000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d40000 0x100>; > + interrupts = ; > + dmas = <&pdma0 13>, <&pdma0 12>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI2>, > + <&cmu_peric CLK_SCLK_SPI2>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI2>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi2_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + spi_3: spi@14d50000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d50000 0x100>; > + interrupts = ; > + dmas = <&pdma0 23>, <&pdma0 22>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI3>, > + <&cmu_peric CLK_SCLK_SPI3>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI3>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi3_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + spi_4: spi@14d00000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d00000 0x100>; > + interrupts = ; > + dmas = <&pdma0 25>, <&pdma0 24>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI4>, > + <&cmu_peric CLK_SCLK_SPI4>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI4>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi4_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + adc: adc@14d10000 { > + compatible = "samsung,exynos7-adc"; > + reg = <0x14d10000 0x100>; > + interrupts = ; > + clock-names = "adc"; > + clocks = <&cmu_peric CLK_PCLK_ADCIF>; > + #io-channel-cells = <1>; > + io-channel-ranges; > + status = "disabled"; > + }; > + > + pwm: pwm@14dd0000 { > + compatible = "samsung,exynos4210-pwm"; > + reg = <0x14dd0000 0x100>; > + interrupts = , , > + , , > + ; > + samsung,pwm-outputs = <0>, <1>, <2>, <3>; > + clocks = <&cmu_peric CLK_PCLK_PWM>; > + clock-names = "timers"; > + #pwm-cells = <3>; > + status = "disabled"; > + }; > + > + hsi2c_0: hsi2c@14e40000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e40000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c0_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C0>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_1: hsi2c@14e50000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e50000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c1_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C1>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_2: hsi2c@14e60000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e60000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c2_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C2>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_3: hsi2c@14e70000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e70000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c3_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C3>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_4: hsi2c@14ec0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14ec0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c4_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C4>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_5: hsi2c@14ed0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14ed0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c5_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C5>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_6: hsi2c@14ee0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14ee0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c6_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C6>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_7: hsi2c@14ef0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14ef0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c7_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C7>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_8: hsi2c@14d90000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14d90000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c8_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C8>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_9: hsi2c@14da0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14da0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c9_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C9>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_10: hsi2c@14de0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14de0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c10_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C10>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_11: hsi2c@14df0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14df0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c11_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C11>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + usbdrd30: usb@15400000 { > + compatible = "samsung,exynos5250-dwusb3"; > + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, > + <&cmu_fsys CLK_SCLK_USBDRD30>; > + clock-names = "usbdrd30", "usbdrd30_susp_clk"; > + assigned-clocks = > + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, > + <&cmu_top CLK_MOUT_SCLK_USBDRD30>, > + <&cmu_top CLK_DIV_SCLK_USBDRD30>; > + assigned-clock-parents = > + <&cmu_top CLK_SCLK_USBDRD30_FSYS>, > + <&cmu_top CLK_MOUT_BUS_PLL_USER>; > + assigned-clock-rates = <0>, <0>, <66700000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + status = "disabled"; > + > + dwc3@15400000 { > + compatible = "snps,dwc3"; > + reg = <0x15400000 0x10000>; > + interrupts = ; > + phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>; > + phy-names = "usb2-phy", "usb3-phy"; > + }; > + }; > + > + usbdrd30_phy: phy@15500000 { > + compatible = "samsung,exynos5433-usbdrd-phy"; > + reg = <0x15500000 0x100>; > + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>, > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>, > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>, > + <&cmu_fsys CLK_SCLK_USBDRD30>; > + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", > + "itp"; > + assigned-clocks = > + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, > + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>; > + assigned-clock-parents = > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>; > + #phy-cells = <1>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + status = "disabled"; > + }; > + > + usbhost30_phy: phy@15580000 { > + compatible = "samsung,exynos5433-usbdrd-phy"; > + reg = <0x15580000 0x100>; > + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>, > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>, > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>, > + <&cmu_fsys CLK_SCLK_USBHOST30>; > + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", > + "itp"; > + assigned-clocks = > + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, > + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>; > + assigned-clock-parents = > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; > + #phy-cells = <1>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + status = "disabled"; > + }; > + > + usbhost30: usb@15a00000 { > + compatible = "samsung,exynos5250-dwusb3"; > + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, > + <&cmu_fsys CLK_SCLK_USBHOST30>; > + clock-names = "usbdrd30", "usbdrd30_susp_clk"; > + assigned-clocks = > + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, > + <&cmu_top CLK_MOUT_SCLK_USBHOST30>, > + <&cmu_top CLK_DIV_SCLK_USBHOST30>; > + assigned-clock-parents = > + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, > + <&cmu_top CLK_MOUT_BUS_PLL_USER>; > + assigned-clock-rates = <0>, <0>, <66700000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + status = "disabled"; > + > + usbdrd_dwc3_0: dwc3@15a00000 { > + compatible = "snps,dwc3"; > + reg = <0x15a00000 0x10000>; > + interrupts = ; > + phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>; > + phy-names = "usb2-phy", "usb3-phy"; > + }; > + }; > + > + mshc_0: mshc@15540000 { > + compatible = "samsung,exynos7-dw-mshc-smu"; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x15540000 0x2000>; > + clocks = <&cmu_fsys CLK_ACLK_MMC0>, > + <&cmu_fsys CLK_SCLK_MMC0>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > + mshc_1: mshc@15550000 { > + compatible = "samsung,exynos7-dw-mshc-smu"; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x15550000 0x2000>; > + clocks = <&cmu_fsys CLK_ACLK_MMC1>, > + <&cmu_fsys CLK_SCLK_MMC1>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > + mshc_2: mshc@15560000 { > + compatible = "samsung,exynos7-dw-mshc-smu"; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x15560000 0x2000>; > + clocks = <&cmu_fsys CLK_ACLK_MMC2>, > + <&cmu_fsys CLK_SCLK_MMC2>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > + amba { > + compatible = "arm,amba-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + pdma0: pdma@15610000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x15610000 0x1000>; > + interrupts = ; > + clocks = <&cmu_fsys CLK_PDMA0>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + pdma1: pdma@15600000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x15600000 0x1000>; > + interrupts = ; > + clocks = <&cmu_fsys CLK_PDMA1>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + }; > + > + audio-subsystem@11400000 { > + compatible = "samsung,exynos5433-lpass"; > + reg = <0x11400000 0x100>, <0x11500000 0x08>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + adma: adma@11420000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x11420000 0x1000>; > + interrupts = ; > + clocks = <&cmu_aud CLK_ACLK_DMAC>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + i2s0: i2s0@11440000 { > + compatible = "samsung,exynos7-i2s"; > + reg = <0x11440000 0x100>; > + dmas = <&adma 0 &adma 2>; > + dma-names = "tx", "rx"; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, > + <&cmu_aud CLK_SCLK_AUD_I2S>, > + <&cmu_aud CLK_SCLK_I2S_BCLK>; > + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s0_bus>; > + status = "disabled"; > + }; > + > + serial_3: serial@11460000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x11460000 0x100>; > + interrupts = ; > + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, > + <&cmu_aud CLK_SCLK_AUD_UART>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart_aud_bus>; > + status = "disabled"; > + }; > + }; > + }; > + > + timer: timer { > + compatible = "arm,armv8-timer"; > + interrupts = + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, > + + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, > + + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, > + + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; > + }; > +}; > + > +#include "exynos5433-pinctrl.dtsi" > +#include "exynos5433-tmu.dtsi" > -- > 1.9.1 > From mboxrd@z Thu Jan 1 00:00:00 1970 From: andi.shyti@samsung.com (Andi Shyti) Date: Thu, 03 Nov 2016 21:26:02 +0900 Subject: [PATCH v3 3/5] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC In-Reply-To: <1478155149-28527-4-git-send-email-cw00.choi@samsung.com> References: <1478155149-28527-1-git-send-email-cw00.choi@samsung.com> <1478155149-28527-4-git-send-email-cw00.choi@samsung.com> Message-ID: <20161103122602.zchqbxo5tbcidmdl@gangnam.samsung> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Chanwoo, Tested-by: Andi Shyti Andi On Thu, Nov 03, 2016 at 03:39:07PM +0900, Chanwoo Choi wrote: > This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on > Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports > PSCI (Power State Coordination Interface) v0.1. > > This patch includes following Device Tree node to support Exynos5433 SoC: > 1. Octa cores for big.LITTLE architecture > - Cortex-A53 LITTLE Quad-core > - Cortex-A57 big Quad-core > - Support PSCI v0.1 > > 2. Clock controller node > - CMU_TOP : clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS > - CMU_CPIF : clocks for LLI (Low Latency Interface) > - CMU_MIF : clocks for DRAM Memory Controller > - CMU_PERIC : clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS > - CMU_PERIS : clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC > - CMU_FSYS : clocks for USB/UFS/SDMMC/TSI/PDMA > - CMU_G2D : clocks for G2D/MDMA > - CMU_DISP : clocks for DECON/HDMI/DSIM/MIXER > - CMU_AUD : clocks for Cortex-A5/BUS/AUDIO > - CMU_BUS{0|1|2} : clocks for global data buses and global peripheral buses > - CMU_G3D : clocks for 3D Graphics Engine > - CMU_GSCL : clocks for GSCALER > - CMU_APOLLO: clocks for Cortex-A53 Quad-core processor. > - CMU_ATLAS : clocks for Cortex-A57 Quad-core processor, > CoreSight and L2 cache controller. > - CMU_MSCL : clocks for M2M (Memory to Memory) scaler and JPEG IPs. > - CMU_MFC : clocks for MFC (Multi-Format Codec) IP. > - CMU_HEVC : clocks for HEVC(High Efficiency Video Codec) decoder IP. > - CMU_ISP : clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. > - CMU_CAM0 : clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs. > - CMU_CAM1 : clocks for COrtex-A5/MIPI_CSIS2/FIMC_LITE_C/FIMC-FD IPs. > > 3. pinctrl node for GPIO > - alive/aud/cpif/ese/finger/fsys/imem/nfc/peric/touch pad > > 4. Timer > - ARM architecture timer (armv8-timer) > - MCT (Multi Core Timer) timer > > 5. Interrupt controller (GIC-400) > > 6. BUS devices > - HS-I2C (High-Speed I2C) device > - SPI (Serial Peripheral Interface) device > > 7. Sound devices > - I2S bus > - LPASS (Low Power Audio Subsystem) > > 8. Power management devices > - CPUFREQ for for Cortex-A53/A57 > - TMU (Thermal Management Unit) for Cortex-A53/A57, G3D, ISP > > 9. Display controller devices > - DECON (Display and enhancement controller) for panel output > - DSI (Display Serial Interface) > - MIC (Mobile Image Compressor) > > 10. USB > - USB 3.0 DRD (Dual Role Device) controller > - USB 3.0 Host controller > > 11. Storage devices > - MSHC (Mobile Storage Host Controller) > > 12. Misc devices > - UART device > - ADC (Analog Digital Converter) > - PWM (Pulse Width Modulation) > - ADMA (Advanced DMA) and PDMA (Peripheral DMA) > > Signed-off-by: Chanwoo Choi > Signed-off-by: Jaehoon Chung > Signed-off-by: Seung-Woo Kim > Signed-off-by: Joonyoung Shim > Signed-off-by: Inki Dae > Signed-off-by: Jonghwa Lee > Signed-off-by: Beomho Seo > Signed-off-by: Jaewon Kim > Signed-off-by: Hyungwon Hwang > Signed-off-by: Inha Song > Signed-off-by: Ingi kim > Signed-off-by: Krzysztof Kozlowski > Signed-off-by: Marek Szyprowski > Signed-off-by: Andrzej Hajda > Signed-off-by: Sylwester Nawrocki > Reviewed-by: Javier Martinez Canillas > --- > arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 794 ++++++++++++ > .../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 23 + > .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 + > arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 296 +++++ > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1356 ++++++++++++++++++++ > 5 files changed, 2491 insertions(+) > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > new file mode 100644 > index 000000000000..796881310bf6 > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > @@ -0,0 +1,794 @@ > +/* > + * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source > + * > + * Copyright (c) 2016 Samsung Electronics Co., Ltd. > + * Chanwoo Choi > + * > + * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device > + * tree nodes are listed in this file. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#define PIN_PULL_NONE 0 > +#define PIN_PULL_DOWN 1 > +#define PIN_PULL_UP 3 > + > +#define PIN_DRV_LV1 0 > +#define PIN_DRV_LV2 2 > +#define PIN_DRV_LV3 1 > +#define PIN_DRV_LV4 3 > + > +#define PIN_IN 0 > +#define PIN_OUT 1 > +#define PIN_FUNC1 2 > + > +#define PIN(_func, _pin, _pull, _drv) \ > + _pin { \ > + samsung,pins = #_pin; \ > + samsung,pin-function = ; \ > + samsung,pin-pud = ; \ > + samsung,pin-drv = ; \ > + } > + > +&pinctrl_alive { > + gpa0: gpa0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + interrupt-parent = <&gic>; > + interrupts = , , , > + , , , > + , ; > + #interrupt-cells = <2>; > + }; > + > + gpa1: gpa1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + interrupt-parent = <&gic>; > + interrupts = , , , > + , , , > + , ; > + #interrupt-cells = <2>; > + }; > + > + gpa2: gpa2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpa3: gpa3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf1: gpf1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf2: gpf2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf3: gpf3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf4: gpf4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf5: gpf5 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +&pinctrl_aud { > + gpz0: gpz0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpz1: gpz1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + i2s0_bus: i2s0-bus { > + samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3", > + "gpz0-4", "gpz0-5", "gpz0-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + pcm0_bus: pcm0-bus { > + samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + uart_aud_bus: uart-aud-bus { > + samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > +}; > + > +&pinctrl_cpif { > + gpv6: gpv6 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +&pinctrl_ese { > + gpj2: gpj2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +&pinctrl_finger { > + gpd5: gpd5 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + spi2_bus: spi2-bus { > + samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c6_bus: hs-i2c6-bus { > + samsung,pins = "gpd5-3", "gpd5-2"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > +}; > + > +&pinctrl_fsys { > + gph1: gph1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr4: gpr4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr0: gpr0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr1: gpr1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr2: gpr2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpr3: gpr3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + sd0_clk: sd0-clk { > + samsung,pins = "gpr0-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_cmd: sd0-cmd { > + samsung,pins = "gpr0-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_rdqs: sd0-rdqs { > + samsung,pins = "gpr0-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_qrdy: sd0-qrdy { > + samsung,pins = "gpr0-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus1: sd0-bus-width1 { > + samsung,pins = "gpr1-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus4: sd0-bus-width4 { > + samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus8: sd0-bus-width8 { > + samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_clk: sd1-clk { > + samsung,pins = "gpr2-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_cmd: sd1-cmd { > + samsung,pins = "gpr2-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus1: sd1-bus-width1 { > + samsung,pins = "gpr3-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus4: sd1-bus-width4 { > + samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus8: sd1-bus-width8 { > + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + pcie_bus: pcie_bus { > + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + }; > + > + sd2_clk: sd2-clk { > + samsung,pins = "gpr4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_cmd: sd2-cmd { > + samsung,pins = "gpr4-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_cd: sd2-cd { > + samsung,pins = "gpr4-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_bus1: sd2-bus-width1 { > + samsung,pins = "gpr4-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_bus4: sd2-bus-width4 { > + samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_clk_output: sd2-clk-output { > + samsung,pins = "gpr4-0"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <2>; > + }; > + > + sd2_cmd_output: sd2-cmd-output { > + samsung,pins = "gpr4-1"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <2>; > + }; > +}; > + > +&pinctrl_imem { > + gpf0: gpf0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +&pinctrl_nfc { > + gpj0: gpj0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + hs_i2c4_bus: hs-i2c4-bus { > + samsung,pins = "gpj0-1", "gpj0-0"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > +}; > + > +&pinctrl_peric { > + gpv7: gpv7 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb0: gpb0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc0: gpc0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc1: gpc1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc2: gpc2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc3: gpc3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg0: gpg0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd0: gpd0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd1: gpd1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd2: gpd2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd4: gpd4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd8: gpd8 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd6: gpd6 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd7: gpd7 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg1: gpg1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg2: gpg2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg3: gpg3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + hs_i2c8_bus: hs-i2c8-bus { > + samsung,pins = "gpb0-1", "gpb0-0"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c9_bus: hs-i2c9-bus { > + samsung,pins = "gpb0-3", "gpb0-2"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + i2s1_bus: i2s1-bus { > + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", > + "gpd4-3", "gpd4-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + pcm1_bus: pcm1-bus { > + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", > + "gpd4-3", "gpd4-4"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + spdif_bus: spdif-bus { > + samsung,pins = "gpd4-3", "gpd4-4"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <1>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_spi_pin0: fimc-is-spi-pin0 { > + samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_spi_pin1: fimc-is-spi-pin1 { > + samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + uart0_bus: uart0-bus { > + samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + hs_i2c2_bus: hs-i2c2-bus { > + samsung,pins = "gpd0-3", "gpd0-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + uart2_bus: uart2-bus { > + samsung,pins = "gpd1-5", "gpd1-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + uart1_bus: uart1-bus { > + samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + hs_i2c3_bus: hs-i2c3-bus { > + samsung,pins = "gpd1-3", "gpd1-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c0_bus: hs-i2c0-bus { > + samsung,pins = "gpd2-1", "gpd2-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c1_bus: hs-i2c1-bus { > + samsung,pins = "gpd2-3", "gpd2-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + pwm0_out: pwm0-out { > + samsung,pins = "gpd2-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + pwm1_out: pwm1-out { > + samsung,pins = "gpd2-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + pwm2_out: pwm2-out { > + samsung,pins = "gpd2-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + pwm3_out: pwm3-out { > + samsung,pins = "gpd2-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + spi1_bus: spi1-bus { > + samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c7_bus: hs-i2c7-bus { > + samsung,pins = "gpd2-7", "gpd2-6"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + spi0_bus: spi0-bus { > + samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c10_bus: hs-i2c10-bus { > + samsung,pins = "gpg3-1", "gpg3-0"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + hs_i2c11_bus: hs-i2c11-bus { > + samsung,pins = "gpg3-3", "gpg3-2"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + spi3_bus: spi3-bus { > + samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + spi4_bus: spi4-bus { > + samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_uart: fimc-is-uart { > + samsung,pins = "gpc1-1", "gpc0-7"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch0_i2c: fimc-is-ch0_i2c { > + samsung,pins = "gpc2-1", "gpc2-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch0_mclk: fimc-is-ch0_mclk { > + samsung,pins = "gpd7-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch1_i2c: fimc-is-ch1-i2c { > + samsung,pins = "gpc2-3", "gpc2-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch1_mclk: fimc-is-ch1-mclk { > + samsung,pins = "gpd7-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch2_i2c: fimc-is-ch2-i2c { > + samsung,pins = "gpc2-5", "gpc2-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + fimc_is_ch2_mclk: fimc-is-ch2-mclk { > + samsung,pins = "gpd7-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > +}; > + > +&pinctrl_touch { > + gpj1: gpj1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + hs_i2c5_bus: hs-i2c5-bus { > + samsung,pins = "gpj1-1", "gpj1-0"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi > new file mode 100644 > index 000000000000..9be2978f1b9a > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi > @@ -0,0 +1,23 @@ > +/* > + * Device tree sources for Exynos5433 TMU sensor configuration > + * > + * Copyright (c) 2016 Jonghwa Lee > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include > + > +#thermal-sensor-cells = <0>; > +samsung,tmu_gain = <8>; > +samsung,tmu_reference_voltage = <23>; > +samsung,tmu_noise_cancel_mode = <4>; > +samsung,tmu_efuse_value = <75>; > +samsung,tmu_min_efuse_value = <40>; > +samsung,tmu_max_efuse_value = <150>; > +samsung,tmu_first_point_trim = <25>; > +samsung,tmu_second_point_trim = <85>; > +samsung,tmu_default_temp_offset = <50>; > +samsung,tmu_mux_addr = <6>; > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi > new file mode 100644 > index 000000000000..125fe58d77ce > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi > @@ -0,0 +1,22 @@ > +/* > + * Device tree sources for Exynos5433 TMU sensor configuration > + * > + * Copyright (c) 2016 Chanwoo Choi > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include > + > +#thermal-sensor-cells = <0>; > +samsung,tmu_gain = <8>; > +samsung,tmu_reference_voltage = <16>; > +samsung,tmu_noise_cancel_mode = <4>; > +samsung,tmu_efuse_value = <75>; > +samsung,tmu_min_efuse_value = <40>; > +samsung,tmu_max_efuse_value = <150>; > +samsung,tmu_first_point_trim = <25>; > +samsung,tmu_second_point_trim = <85>; > +samsung,tmu_default_temp_offset = <50>; > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi > new file mode 100644 > index 000000000000..ceaa05145b8a > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi > @@ -0,0 +1,296 @@ > +/* > + * Device tree sources for Exynos5433 thermal zone > + * > + * Copyright (c) 2016 Chanwoo Choi > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include > + > +/ { > +thermal-zones { > + atlas0_thermal: atlas0-thermal { > + thermal-sensors = <&tmu_atlas0>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + atlas0_alert_0: atlas0-alert-0 { > + temperature = <65000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_1: atlas0-alert-1 { > + temperature = <70000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_2: atlas0-alert-2 { > + temperature = <75000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_3: atlas0-alert-3 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_4: atlas0-alert-4 { > + temperature = <85000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_5: atlas0-alert-5 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas0_alert_6: atlas0-alert-6 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + > + cooling-maps { > + map0 { > + /* Set maximum frequency as 1800MHz */ > + trip = <&atlas0_alert_0>; > + cooling-device = <&cpu4 1 2>; > + }; > + map1 { > + /* Set maximum frequency as 1700MHz */ > + trip = <&atlas0_alert_1>; > + cooling-device = <&cpu4 2 3>; > + }; > + map2 { > + /* Set maximum frequency as 1600MHz */ > + trip = <&atlas0_alert_2>; > + cooling-device = <&cpu4 3 4>; > + }; > + map3 { > + /* Set maximum frequency as 1500MHz */ > + trip = <&atlas0_alert_3>; > + cooling-device = <&cpu4 4 5>; > + }; > + map4 { > + /* Set maximum frequency as 1400MHz */ > + trip = <&atlas0_alert_4>; > + cooling-device = <&cpu4 5 7>; > + }; > + map5 { > + /* Set maximum frequencyas 1200MHz */ > + trip = <&atlas0_alert_5>; > + cooling-device = <&cpu4 7 9>; > + }; > + map6 { > + /* Set maximum frequency as 1000MHz */ > + trip = <&atlas0_alert_6>; > + cooling-device = <&cpu4 9 14>; > + }; > + }; > + }; > + > + atlas1_thermal: atlas1-thermal { > + thermal-sensors = <&tmu_atlas1>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + atlas1_alert_0: atlas1-alert-0 { > + temperature = <65000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_1: atlas1-alert-1 { > + temperature = <70000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_2: atlas1-alert-2 { > + temperature = <75000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_3: atlas1-alert-3 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_4: atlas1-alert-4 { > + temperature = <85000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_5: atlas1-alert-5 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + atlas1_alert_6: atlas1-alert-6 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + }; > + > + g3d_thermal: g3d-thermal { > + thermal-sensors = <&tmu_g3d>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + g3d_alert_0: g3d-alert-0 { > + temperature = <70000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_1: g3d-alert-1 { > + temperature = <75000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_2: g3d-alert-2 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_3: g3d-alert-3 { > + temperature = <85000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_4: g3d-alert-4 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_5: g3d-alert-5 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + g3d_alert_6: g3d-alert-6 { > + temperature = <100000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + }; > + > + apollo_thermal: apollo-thermal { > + thermal-sensors = <&tmu_apollo>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + apollo_alert_0: apollo-alert-0 { > + temperature = <65000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_1: apollo-alert-1 { > + temperature = <70000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_2: apollo-alert-2 { > + temperature = <75000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_3: apollo-alert-3 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_4: apollo-alert-4 { > + temperature = <85000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_5: apollo-alert-5 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + apollo_alert_6: apollo-alert-6 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + > + cooling-maps { > + map0 { > + /* Set maximum frequency as 1200MHz */ > + trip = <&apollo_alert_2>; > + cooling-device = <&cpu0 1 2>; > + }; > + map1 { > + /* Set maximum frequency as 1100MHz */ > + trip = <&apollo_alert_3>; > + cooling-device = <&cpu0 2 3>; > + }; > + map2 { > + /* Set maximum frequency as 1000MHz */ > + trip = <&apollo_alert_4>; > + cooling-device = <&cpu0 3 4>; > + }; > + map3 { > + /* Set maximum frequency as 900MHz */ > + trip = <&apollo_alert_5>; > + cooling-device = <&cpu0 4 5>; > + }; > + map4 { > + /* Set maximum frequency as 800MHz */ > + trip = <&apollo_alert_6>; > + cooling-device = <&cpu0 5 9>; > + }; > + }; > + }; > + > + isp_thermal: isp-thermal { > + thermal-sensors = <&tmu_isp>; > + polling-delay-passive = <0>; > + polling-delay = <0>; > + trips { > + isp_alert_0: isp-alert-0 { > + temperature = <80000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_1: isp-alert-1 { > + temperature = <85000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_2: isp-alert-2 { > + temperature = <90000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_3: isp-alert-3 { > + temperature = <95000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_4: isp-alert-4 { > + temperature = <100000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_5: isp-alert-5 { > + temperature = <105000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + isp_alert_6: isp-alert-6 { > + temperature = <110000>; /* millicelsius */ > + hysteresis = <1000>; /* millicelsius */ > + type = "active"; > + }; > + }; > + }; > +}; > +}; > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > new file mode 100644 > index 000000000000..1188630823a7 > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -0,0 +1,1356 @@ > +/* > + * Samsung's Exynos5433 SoC device tree source > + * > + * Copyright (c) 2016 Samsung Electronics Co., Ltd. > + * > + * Samsung's Exynos5433 SoC device nodes are listed in this file. > + * Exynos5433 based board files can include this file and provide > + * values for board specific bindings. > + * > + * Note: This file does not include device nodes for all the controllers in > + * Exynos5433 SoC. As device tree coverage for Exynos5433 increases, > + * additional nodes can be added to this file. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include > +#include > + > +/ { > + compatible = "samsung,exynos5433"; > + #address-cells = <2>; > + #size-cells = <2>; > + > + interrupt-parent = <&gic>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu0: cpu at 100 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x100>; > + clock-frequency = <1300000000>; > + clocks = <&cmu_apollo CLK_SCLK_APOLLO>; > + clock-names = "apolloclk"; > + operating-points-v2 = <&cluster_a53_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu1: cpu at 101 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x101>; > + clock-frequency = <1300000000>; > + operating-points-v2 = <&cluster_a53_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu2: cpu at 102 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x102>; > + clock-frequency = <1300000000>; > + operating-points-v2 = <&cluster_a53_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu3: cpu at 103 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x103>; > + clock-frequency = <1300000000>; > + operating-points-v2 = <&cluster_a53_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu4: cpu at 0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x0>; > + clock-frequency = <1900000000>; > + clocks = <&cmu_atlas CLK_SCLK_ATLAS>; > + clock-names = "atlasclk"; > + operating-points-v2 = <&cluster_a57_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu5: cpu at 1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x1>; > + clock-frequency = <1900000000>; > + operating-points-v2 = <&cluster_a57_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu6: cpu at 2 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x2>; > + clock-frequency = <1900000000>; > + operating-points-v2 = <&cluster_a57_opp_table>; > + #cooling-cells = <2>; > + }; > + > + cpu7: cpu at 3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a57", "arm,armv8"; > + enable-method = "psci"; > + reg = <0x3>; > + clock-frequency = <1900000000>; > + operating-points-v2 = <&cluster_a57_opp_table>; > + #cooling-cells = <2>; > + }; > + }; > + > + cluster_a53_opp_table: opp_table0 { > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp at 400000000 { > + opp-hz = /bits/ 64 <400000000>; > + opp-microvolt = <900000>; > + }; > + opp at 500000000 { > + opp-hz = /bits/ 64 <500000000>; > + opp-microvolt = <925000>; > + }; > + opp at 600000000 { > + opp-hz = /bits/ 64 <600000000>; > + opp-microvolt = <950000>; > + }; > + opp at 700000000 { > + opp-hz = /bits/ 64 <700000000>; > + opp-microvolt = <975000>; > + }; > + opp at 800000000 { > + opp-hz = /bits/ 64 <800000000>; > + opp-microvolt = <1000000>; > + }; > + opp at 900000000 { > + opp-hz = /bits/ 64 <900000000>; > + opp-microvolt = <1050000>; > + }; > + opp at 1000000000 { > + opp-hz = /bits/ 64 <1000000000>; > + opp-microvolt = <1075000>; > + }; > + opp at 1100000000 { > + opp-hz = /bits/ 64 <1100000000>; > + opp-microvolt = <1112500>; > + }; > + opp at 1200000000 { > + opp-hz = /bits/ 64 <1200000000>; > + opp-microvolt = <1112500>; > + }; > + opp at 1300000000 { > + opp-hz = /bits/ 64 <1300000000>; > + opp-microvolt = <1150000>; > + }; > + }; > + > + cluster_a57_opp_table: opp_table1 { > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp at 500000000 { > + opp-hz = /bits/ 64 <500000000>; > + opp-microvolt = <900000>; > + }; > + opp at 600000000 { > + opp-hz = /bits/ 64 <600000000>; > + opp-microvolt = <900000>; > + }; > + opp at 700000000 { > + opp-hz = /bits/ 64 <700000000>; > + opp-microvolt = <912500>; > + }; > + opp at 800000000 { > + opp-hz = /bits/ 64 <800000000>; > + opp-microvolt = <912500>; > + }; > + opp at 900000000 { > + opp-hz = /bits/ 64 <900000000>; > + opp-microvolt = <937500>; > + }; > + opp at 1000000000 { > + opp-hz = /bits/ 64 <1000000000>; > + opp-microvolt = <975000>; > + }; > + opp at 1100000000 { > + opp-hz = /bits/ 64 <1100000000>; > + opp-microvolt = <1012500>; > + }; > + opp at 1200000000 { > + opp-hz = /bits/ 64 <1200000000>; > + opp-microvolt = <1037500>; > + }; > + opp at 1300000000 { > + opp-hz = /bits/ 64 <1300000000>; > + opp-microvolt = <1062500>; > + }; > + opp at 1400000000 { > + opp-hz = /bits/ 64 <1400000000>; > + opp-microvolt = <1087500>; > + }; > + opp at 1500000000 { > + opp-hz = /bits/ 64 <1500000000>; > + opp-microvolt = <1125000>; > + }; > + opp at 1600000000 { > + opp-hz = /bits/ 64 <1600000000>; > + opp-microvolt = <1137500>; > + }; > + opp at 1700000000 { > + opp-hz = /bits/ 64 <1700000000>; > + opp-microvolt = <1175000>; > + }; > + opp at 1800000000 { > + opp-hz = /bits/ 64 <1800000000>; > + opp-microvolt = <1212500>; > + }; > + opp at 1900000000 { > + opp-hz = /bits/ 64 <1900000000>; > + opp-microvolt = <1262500>; > + }; > + }; > + > + psci { > + compatible = "arm,psci"; > + method = "smc"; > + cpu_off = <0x84000002>; > + cpu_on = <0xC4000003>; > + }; > + > + reboot: syscon-reboot { > + compatible = "syscon-reboot"; > + regmap = <&pmu_system_controller>; > + offset = <0x400>; /* SWRESET */ > + mask = <0x1>; > + }; > + > + soc: soc { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x0 0x0 0x18000000>; > + > + chipid at 10000000 { > + compatible = "samsung,exynos4210-chipid"; > + reg = <0x10000000 0x100>; > + }; > + > + xxti: xxti { > + compatible = "fixed-clock"; > + clock-output-names = "oscclk"; > + #clock-cells = <0>; > + }; > + > + cmu_top: clock-controller at 10030000 { > + compatible = "samsung,exynos5433-cmu-top"; > + reg = <0x10030000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_mphy_pll", > + "sclk_mfc_pll", > + "sclk_bus_pll"; > + clocks = <&xxti>, > + <&cmu_cpif CLK_SCLK_MPHY_PLL>, > + <&cmu_mif CLK_SCLK_MFC_PLL>, > + <&cmu_mif CLK_SCLK_BUS_PLL>; > + }; > + > + cmu_cpif: clock-controller at 10fc0000 { > + compatible = "samsung,exynos5433-cmu-cpif"; > + reg = <0x10fc0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk"; > + clocks = <&xxti>; > + }; > + > + cmu_mif: clock-controller at 105b0000 { > + compatible = "samsung,exynos5433-cmu-mif"; > + reg = <0x105b0000 0x2000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_mphy_pll"; > + clocks = <&xxti>, > + <&cmu_cpif CLK_SCLK_MPHY_PLL>; > + }; > + > + cmu_peric: clock-controller at 14c80000 { > + compatible = "samsung,exynos5433-cmu-peric"; > + reg = <0x14c80000 0x1000>; > + #clock-cells = <1>; > + }; > + > + cmu_peris: clock-controller at 0x10040000 { > + compatible = "samsung,exynos5433-cmu-peris"; > + reg = <0x10040000 0x1000>; > + #clock-cells = <1>; > + }; > + > + cmu_fsys: clock-controller at 156e0000 { > + compatible = "samsung,exynos5433-cmu-fsys"; > + reg = <0x156e0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_ufs_mphy", > + "div_aclk_fsys_200", > + "sclk_pcie_100_fsys", > + "sclk_ufsunipro_fsys", > + "sclk_mmc2_fsys", > + "sclk_mmc1_fsys", > + "sclk_mmc0_fsys", > + "sclk_usbhost30_fsys", > + "sclk_usbdrd30_fsys"; > + clocks = <&xxti>, > + <&cmu_cpif CLK_SCLK_UFS_MPHY>, > + <&cmu_top CLK_DIV_ACLK_FSYS_200>, > + <&cmu_top CLK_SCLK_PCIE_100_FSYS>, > + <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>, > + <&cmu_top CLK_SCLK_MMC2_FSYS>, > + <&cmu_top CLK_SCLK_MMC1_FSYS>, > + <&cmu_top CLK_SCLK_MMC0_FSYS>, > + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, > + <&cmu_top CLK_SCLK_USBDRD30_FSYS>; > + }; > + > + cmu_g2d: clock-controller at 12460000 { > + compatible = "samsung,exynos5433-cmu-g2d"; > + reg = <0x12460000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "aclk_g2d_266", > + "aclk_g2d_400"; > + clocks = <&xxti>, > + <&cmu_top CLK_ACLK_G2D_266>, > + <&cmu_top CLK_ACLK_G2D_400>; > + }; > + > + cmu_disp: clock-controller at 13b90000 { > + compatible = "samsung,exynos5433-cmu-disp"; > + reg = <0x13b90000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_dsim1_disp", > + "sclk_dsim0_disp", > + "sclk_dsd_disp", > + "sclk_decon_tv_eclk_disp", > + "sclk_decon_vclk_disp", > + "sclk_decon_eclk_disp", > + "sclk_decon_tv_vclk_disp", > + "aclk_disp_333"; > + clocks = <&xxti>, > + <&cmu_mif CLK_SCLK_DSIM1_DISP>, > + <&cmu_mif CLK_SCLK_DSIM0_DISP>, > + <&cmu_mif CLK_SCLK_DSD_DISP>, > + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, > + <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>, > + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, > + <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, > + <&cmu_mif CLK_ACLK_DISP_333>; > + }; > + > + cmu_aud: clock-controller at 114c0000 { > + compatible = "samsung,exynos5433-cmu-aud"; > + reg = <0x114c0000 0x1000>; > + #clock-cells = <1>; > + }; > + > + cmu_bus0: clock-controller at 13600000 { > + compatible = "samsung,exynos5433-cmu-bus0"; > + reg = <0x13600000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "aclk_bus0_400"; > + clocks = <&cmu_top CLK_ACLK_BUS0_400>; > + }; > + > + cmu_bus1: clock-controller at 14800000 { > + compatible = "samsung,exynos5433-cmu-bus1"; > + reg = <0x14800000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "aclk_bus1_400"; > + clocks = <&cmu_top CLK_ACLK_BUS1_400>; > + }; > + > + cmu_bus2: clock-controller at 13400000 { > + compatible = "samsung,exynos5433-cmu-bus2"; > + reg = <0x13400000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "aclk_bus2_400"; > + clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>; > + }; > + > + cmu_g3d: clock-controller at 14aa0000 { > + compatible = "samsung,exynos5433-cmu-g3d"; > + reg = <0x14aa0000 0x2000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "aclk_g3d_400"; > + clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; > + }; > + > + cmu_gscl: clock-controller at 13cf0000 { > + compatible = "samsung,exynos5433-cmu-gscl"; > + reg = <0x13cf0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "aclk_gscl_111", > + "aclk_gscl_333"; > + clocks = <&xxti>, > + <&cmu_top CLK_ACLK_GSCL_111>, > + <&cmu_top CLK_ACLK_GSCL_333>; > + }; > + > + cmu_apollo: clock-controller at 11900000 { > + compatible = "samsung,exynos5433-cmu-apollo"; > + reg = <0x11900000 0x2000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "sclk_bus_pll_apollo"; > + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>; > + }; > + > + cmu_atlas: clock-controller at 11800000 { > + compatible = "samsung,exynos5433-cmu-atlas"; > + reg = <0x11800000 0x2000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "sclk_bus_pll_atlas"; > + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; > + }; > + > + cmu_mscl: clock-controller at 105d0000 { > + compatible = "samsung,exynos5433-cmu-mscl"; > + reg = <0x150d0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_jpeg_mscl", > + "aclk_mscl_400"; > + clocks = <&xxti>, > + <&cmu_top CLK_SCLK_JPEG_MSCL>, > + <&cmu_top CLK_ACLK_MSCL_400>; > + }; > + > + cmu_mfc: clock-controller at 15280000 { > + compatible = "samsung,exynos5433-cmu-mfc"; > + reg = <0x15280000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "aclk_mfc_400"; > + clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; > + }; > + > + cmu_hevc: clock-controller at 14f80000 { > + compatible = "samsung,exynos5433-cmu-hevc"; > + reg = <0x14f80000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", "aclk_hevc_400"; > + clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; > + }; > + > + cmu_isp: clock-controller at 146d0000 { > + compatible = "samsung,exynos5433-cmu-isp"; > + reg = <0x146d0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "aclk_isp_dis_400", > + "aclk_isp_400"; > + clocks = <&xxti>, > + <&cmu_top CLK_ACLK_ISP_DIS_400>, > + <&cmu_top CLK_ACLK_ISP_400>; > + }; > + > + cmu_cam0: clock-controller at 120d0000 { > + compatible = "samsung,exynos5433-cmu-cam0"; > + reg = <0x120d0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "aclk_cam0_333", > + "aclk_cam0_400", > + "aclk_cam0_552"; > + clocks = <&xxti>, > + <&cmu_top CLK_ACLK_CAM0_333>, > + <&cmu_top CLK_ACLK_CAM0_400>, > + <&cmu_top CLK_ACLK_CAM0_552>; > + }; > + > + cmu_cam1: clock-controller at 145d0000 { > + compatible = "samsung,exynos5433-cmu-cam1"; > + reg = <0x145d0000 0x1000>; > + #clock-cells = <1>; > + > + clock-names = "oscclk", > + "sclk_isp_uart_cam1", > + "sclk_isp_spi1_cam1", > + "sclk_isp_spi0_cam1", > + "aclk_cam1_333", > + "aclk_cam1_400", > + "aclk_cam1_552"; > + clocks = <&xxti>, > + <&cmu_top CLK_SCLK_ISP_UART_CAM1>, > + <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>, > + <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>, > + <&cmu_top CLK_ACLK_CAM1_333>, > + <&cmu_top CLK_ACLK_CAM1_400>, > + <&cmu_top CLK_ACLK_CAM1_552>; > + }; > + > + tmu_atlas0: tmu at 10060000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x10060000 0x200>; > + interrupts = ; > + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, > + <&cmu_peris CLK_SCLK_TMU0>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + tmu_atlas1: tmu at 10068000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x10068000 0x200>; > + interrupts = ; > + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, > + <&cmu_peris CLK_SCLK_TMU0>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + tmu_g3d: tmu at 10070000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x10070000 0x200>; > + interrupts = ; > + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, > + <&cmu_peris CLK_SCLK_TMU1>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-g3d-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + tmu_apollo: tmu at 10078000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x10078000 0x200>; > + interrupts = ; > + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, > + <&cmu_peris CLK_SCLK_TMU1>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + tmu_isp: tmu at 1007c000 { > + compatible = "samsung,exynos5433-tmu"; > + reg = <0x1007c000 0x200>; > + interrupts = ; > + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, > + <&cmu_peris CLK_SCLK_TMU1>; > + clock-names = "tmu_apbif", "tmu_sclk"; > + #include "exynos5433-tmu-sensor-conf.dtsi" > + status = "disabled"; > + }; > + > + mct at 101c0000 { > + compatible = "samsung,exynos4210-mct"; > + reg = <0x101c0000 0x800>; > + interrupts = , , > + , , > + , , > + , , > + , , > + , ; > + clocks = <&xxti>, <&cmu_peris CLK_PCLK_MCT>; > + clock-names = "fin_pll", "mct"; > + }; > + > + pinctrl_alive: pinctrl at 10580000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x10580000 0x1a20>, <0x11090000 0x100>; > + > + wakeup-interrupt-controller { > + compatible = "samsung,exynos7-wakeup-eint"; > + interrupts = ; > + }; > + }; > + > + pinctrl_aud: pinctrl at 114b0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x114b0000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_cpif: pinctrl at 10fe0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x10fe0000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_ese: pinctrl at 14ca0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14ca0000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_finger: pinctrl at 14cb0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14cb0000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_fsys: pinctrl at 15690000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x15690000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_imem: pinctrl at 11090000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x11090000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_nfc: pinctrl at 14cd0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14cd0000 0x1000>; > + interrupts = ; > + }; > + > + pinctrl_peric: pinctrl at 14cc0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14cc0000 0x1100>; > + interrupts = ; > + }; > + > + pinctrl_touch: pinctrl at 14ce0000 { > + compatible = "samsung,exynos5433-pinctrl"; > + reg = <0x14ce0000 0x1100>; > + interrupts = ; > + }; > + > + pmu_system_controller: system-controller at 105c0000 { > + compatible = "samsung,exynos5433-pmu", "syscon"; > + reg = <0x105c0000 0x5008>; > + #clock-cells = <1>; > + clock-names = "clkout16"; > + clocks = <&xxti>; > + }; > + > + gic: interrupt-controller at 11001000 { > + compatible = "arm,gic-400"; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x11001000 0x1000>, > + <0x11002000 0x2000>, > + <0x11004000 0x2000>, > + <0x11006000 0x2000>; > + interrupts = ; > + }; > + > + mipi_phy: video-phy at 105c0710 { > + compatible = "samsung,exynos5433-mipi-video-phy"; > + #phy-cells = <1>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + samsung,cam0-sysreg = <&syscon_cam0>; > + samsung,cam1-sysreg = <&syscon_cam1>; > + samsung,disp-sysreg = <&syscon_disp>; > + }; > + > + decon: decon at 13800000 { > + compatible = "samsung,exynos5433-decon"; > + reg = <0x13800000 0x2104>; > + clocks = <&cmu_disp CLK_PCLK_DECON>, > + <&cmu_disp CLK_ACLK_DECON>, > + <&cmu_disp CLK_ACLK_SMMU_DECON0X>, > + <&cmu_disp CLK_ACLK_XIU_DECON0X>, > + <&cmu_disp CLK_PCLK_SMMU_DECON0X>, > + <&cmu_disp CLK_SCLK_DECON_VCLK>, > + <&cmu_disp CLK_SCLK_DECON_ECLK>; > + clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", > + "aclk_xiu_decon0x", "pclk_smmu_decon0x", > + "sclk_decon_vclk", "sclk_decon_eclk"; > + interrupt-names = "fifo", "vsync", "lcd_sys"; > + interrupts = , , > + ; > + samsung,disp-sysreg = <&syscon_disp>; > + status = "disabled"; > + iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>; > + iommu-names = "m0", "m1"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port at 0 { > + reg = <0>; > + decon_to_mic: endpoint { > + remote-endpoint = > + <&mic_to_decon>; > + }; > + }; > + }; > + }; > + > + dsi: dsi at 13900000 { > + compatible = "samsung,exynos5433-mipi-dsi"; > + reg = <0x13900000 0xC0>; > + interrupts = ; > + phys = <&mipi_phy 1>; > + phy-names = "dsim"; > + clocks = <&cmu_disp CLK_PCLK_DSIM0>, > + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>, > + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>, > + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>, > + <&cmu_disp CLK_SCLK_DSIM0>; > + clock-names = "bus_clk", > + "phyclk_mipidphy0_bitclkdiv8", > + "phyclk_mipidphy0_rxclkesc0", > + "sclk_rgb_vclk_to_dsim0", > + "sclk_mipi"; > + status = "disabled"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port at 0 { > + reg = <0>; > + dsi_to_mic: endpoint { > + remote-endpoint = <&mic_to_dsi>; > + }; > + }; > + }; > + }; > + > + mic: mic at 13930000 { > + compatible = "samsung,exynos5433-mic"; > + reg = <0x13930000 0x48>; > + clocks = <&cmu_disp CLK_PCLK_MIC0>, > + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; > + clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; > + samsung,disp-syscon = <&syscon_disp>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port at 0 { > + reg = <0>; > + mic_to_decon: endpoint { > + remote-endpoint = > + <&decon_to_mic>; > + }; > + }; > + > + port at 1 { > + reg = <1>; > + mic_to_dsi: endpoint { > + remote-endpoint = <&dsi_to_mic>; > + }; > + }; > + }; > + }; > + > + syscon_disp: syscon at 13b80000 { > + compatible = "syscon"; > + reg = <0x13b80000 0x1010>; > + }; > + > + syscon_cam0: syscon at 120f0000 { > + compatible = "syscon"; > + reg = <0x120f0000 0x1020>; > + }; > + > + syscon_cam1: syscon at 145f0000 { > + compatible = "syscon"; > + reg = <0x145f0000 0x1038>; > + }; > + > + sysmmu_decon0x: sysmmu at 0x13a00000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x13a00000 0x1000>; > + interrupts = ; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>, > + <&cmu_disp CLK_ACLK_SMMU_DECON0X>; > + #iommu-cells = <0>; > + }; > + > + sysmmu_decon1x: sysmmu at 0x13a10000 { > + compatible = "samsung,exynos-sysmmu"; > + reg = <0x13a10000 0x1000>; > + interrupts = ; > + clock-names = "pclk", "aclk"; > + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>, > + <&cmu_disp CLK_ACLK_SMMU_DECON1X>; > + #iommu-cells = <0>; > + }; > + > + serial_0: serial at 14c10000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x14c10000 0x100>; > + interrupts = ; > + clocks = <&cmu_peric CLK_PCLK_UART0>, > + <&cmu_peric CLK_SCLK_UART0>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_bus>; > + status = "disabled"; > + }; > + > + serial_1: serial at 14c20000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x14c20000 0x100>; > + interrupts = ; > + clocks = <&cmu_peric CLK_PCLK_UART1>, > + <&cmu_peric CLK_SCLK_UART1>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart1_bus>; > + status = "disabled"; > + }; > + > + serial_2: serial at 14c30000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x14c30000 0x100>; > + interrupts = ; > + clocks = <&cmu_peric CLK_PCLK_UART2>, > + <&cmu_peric CLK_SCLK_UART2>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart2_bus>; > + status = "disabled"; > + }; > + > + spi_0: spi at 14d20000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d20000 0x100>; > + interrupts = ; > + dmas = <&pdma0 9>, <&pdma0 8>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI0>, > + <&cmu_peric CLK_SCLK_SPI0>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI0>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi0_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + spi_1: spi at 14d30000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d30000 0x100>; > + interrupts = ; > + dmas = <&pdma0 11>, <&pdma0 10>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI1>, > + <&cmu_peric CLK_SCLK_SPI1>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI1>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi1_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + spi_2: spi at 14d40000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d40000 0x100>; > + interrupts = ; > + dmas = <&pdma0 13>, <&pdma0 12>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI2>, > + <&cmu_peric CLK_SCLK_SPI2>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI2>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi2_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + spi_3: spi at 14d50000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d50000 0x100>; > + interrupts = ; > + dmas = <&pdma0 23>, <&pdma0 22>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI3>, > + <&cmu_peric CLK_SCLK_SPI3>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI3>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi3_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + spi_4: spi at 14d00000 { > + compatible = "samsung,exynos5433-spi"; > + reg = <0x14d00000 0x100>; > + interrupts = ; > + dmas = <&pdma0 25>, <&pdma0 24>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_peric CLK_PCLK_SPI4>, > + <&cmu_peric CLK_SCLK_SPI4>, > + <&cmu_peric CLK_SCLK_IOCLK_SPI4>; > + clock-names = "spi", "spi_busclk0", "spi_ioclk"; > + samsung,spi-src-clk = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi4_bus>; > + num-cs = <1>; > + status = "disabled"; > + }; > + > + adc: adc at 14d10000 { > + compatible = "samsung,exynos7-adc"; > + reg = <0x14d10000 0x100>; > + interrupts = ; > + clock-names = "adc"; > + clocks = <&cmu_peric CLK_PCLK_ADCIF>; > + #io-channel-cells = <1>; > + io-channel-ranges; > + status = "disabled"; > + }; > + > + pwm: pwm at 14dd0000 { > + compatible = "samsung,exynos4210-pwm"; > + reg = <0x14dd0000 0x100>; > + interrupts = , , > + , , > + ; > + samsung,pwm-outputs = <0>, <1>, <2>, <3>; > + clocks = <&cmu_peric CLK_PCLK_PWM>; > + clock-names = "timers"; > + #pwm-cells = <3>; > + status = "disabled"; > + }; > + > + hsi2c_0: hsi2c at 14e40000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e40000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c0_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C0>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_1: hsi2c at 14e50000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e50000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c1_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C1>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_2: hsi2c at 14e60000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e60000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c2_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C2>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_3: hsi2c at 14e70000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14e70000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c3_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C3>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_4: hsi2c at 14ec0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14ec0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c4_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C4>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_5: hsi2c at 14ed0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14ed0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c5_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C5>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_6: hsi2c at 14ee0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14ee0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c6_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C6>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_7: hsi2c at 14ef0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14ef0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c7_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C7>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_8: hsi2c at 14d90000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14d90000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c8_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C8>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_9: hsi2c at 14da0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14da0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c9_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C9>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_10: hsi2c at 14de0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14de0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c10_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C10>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + hsi2c_11: hsi2c at 14df0000 { > + compatible = "samsung,exynos7-hsi2c"; > + reg = <0x14df0000 0x1000>; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hs_i2c11_bus>; > + clocks = <&cmu_peric CLK_PCLK_HSI2C11>; > + clock-names = "hsi2c"; > + status = "disabled"; > + }; > + > + usbdrd30: usb at 15400000 { > + compatible = "samsung,exynos5250-dwusb3"; > + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, > + <&cmu_fsys CLK_SCLK_USBDRD30>; > + clock-names = "usbdrd30", "usbdrd30_susp_clk"; > + assigned-clocks = > + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, > + <&cmu_top CLK_MOUT_SCLK_USBDRD30>, > + <&cmu_top CLK_DIV_SCLK_USBDRD30>; > + assigned-clock-parents = > + <&cmu_top CLK_SCLK_USBDRD30_FSYS>, > + <&cmu_top CLK_MOUT_BUS_PLL_USER>; > + assigned-clock-rates = <0>, <0>, <66700000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + status = "disabled"; > + > + dwc3 at 15400000 { > + compatible = "snps,dwc3"; > + reg = <0x15400000 0x10000>; > + interrupts = ; > + phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>; > + phy-names = "usb2-phy", "usb3-phy"; > + }; > + }; > + > + usbdrd30_phy: phy at 15500000 { > + compatible = "samsung,exynos5433-usbdrd-phy"; > + reg = <0x15500000 0x100>; > + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>, > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>, > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>, > + <&cmu_fsys CLK_SCLK_USBDRD30>; > + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", > + "itp"; > + assigned-clocks = > + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, > + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>; > + assigned-clock-parents = > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>; > + #phy-cells = <1>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + status = "disabled"; > + }; > + > + usbhost30_phy: phy at 15580000 { > + compatible = "samsung,exynos5433-usbdrd-phy"; > + reg = <0x15580000 0x100>; > + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>, > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>, > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>, > + <&cmu_fsys CLK_SCLK_USBHOST30>; > + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", > + "itp"; > + assigned-clocks = > + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, > + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>; > + assigned-clock-parents = > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; > + #phy-cells = <1>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + status = "disabled"; > + }; > + > + usbhost30: usb at 15a00000 { > + compatible = "samsung,exynos5250-dwusb3"; > + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, > + <&cmu_fsys CLK_SCLK_USBHOST30>; > + clock-names = "usbdrd30", "usbdrd30_susp_clk"; > + assigned-clocks = > + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, > + <&cmu_top CLK_MOUT_SCLK_USBHOST30>, > + <&cmu_top CLK_DIV_SCLK_USBHOST30>; > + assigned-clock-parents = > + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, > + <&cmu_top CLK_MOUT_BUS_PLL_USER>; > + assigned-clock-rates = <0>, <0>, <66700000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + status = "disabled"; > + > + usbdrd_dwc3_0: dwc3 at 15a00000 { > + compatible = "snps,dwc3"; > + reg = <0x15a00000 0x10000>; > + interrupts = ; > + phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>; > + phy-names = "usb2-phy", "usb3-phy"; > + }; > + }; > + > + mshc_0: mshc at 15540000 { > + compatible = "samsung,exynos7-dw-mshc-smu"; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x15540000 0x2000>; > + clocks = <&cmu_fsys CLK_ACLK_MMC0>, > + <&cmu_fsys CLK_SCLK_MMC0>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > + mshc_1: mshc at 15550000 { > + compatible = "samsung,exynos7-dw-mshc-smu"; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x15550000 0x2000>; > + clocks = <&cmu_fsys CLK_ACLK_MMC1>, > + <&cmu_fsys CLK_SCLK_MMC1>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > + mshc_2: mshc at 15560000 { > + compatible = "samsung,exynos7-dw-mshc-smu"; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x15560000 0x2000>; > + clocks = <&cmu_fsys CLK_ACLK_MMC2>, > + <&cmu_fsys CLK_SCLK_MMC2>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > + amba { > + compatible = "arm,amba-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + pdma0: pdma at 15610000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x15610000 0x1000>; > + interrupts = ; > + clocks = <&cmu_fsys CLK_PDMA0>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + pdma1: pdma at 15600000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x15600000 0x1000>; > + interrupts = ; > + clocks = <&cmu_fsys CLK_PDMA1>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + }; > + > + audio-subsystem at 11400000 { > + compatible = "samsung,exynos5433-lpass"; > + reg = <0x11400000 0x100>, <0x11500000 0x08>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + adma: adma at 11420000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x11420000 0x1000>; > + interrupts = ; > + clocks = <&cmu_aud CLK_ACLK_DMAC>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + i2s0: i2s0 at 11440000 { > + compatible = "samsung,exynos7-i2s"; > + reg = <0x11440000 0x100>; > + dmas = <&adma 0 &adma 2>; > + dma-names = "tx", "rx"; > + interrupts = ; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, > + <&cmu_aud CLK_SCLK_AUD_I2S>, > + <&cmu_aud CLK_SCLK_I2S_BCLK>; > + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s0_bus>; > + status = "disabled"; > + }; > + > + serial_3: serial at 11460000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x11460000 0x100>; > + interrupts = ; > + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, > + <&cmu_aud CLK_SCLK_AUD_UART>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart_aud_bus>; > + status = "disabled"; > + }; > + }; > + }; > + > + timer: timer { > + compatible = "arm,armv8-timer"; > + interrupts = + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, > + + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, > + + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, > + + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; > + }; > +}; > + > +#include "exynos5433-pinctrl.dtsi" > +#include "exynos5433-tmu.dtsi" > -- > 1.9.1 >