* [PATCH v3 0/5] arm64: dts: Add the dts file for Exynos5433 and TM/TM2E board
@ 2016-11-03 6:39 ` Chanwoo Choi
0 siblings, 0 replies; 43+ messages in thread
From: Chanwoo Choi @ 2016-11-03 6:39 UTC (permalink / raw)
To: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel
Cc: cw00.choi, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, andi.shyti,
chanwoo
This patchset adds the Device Tree file for Samsung 64-bit Exynos5433 SoC
and TM/TM2E board based on Exynos5433. The Exynos5433 has Octa-core CPUs
(quad Cortex-A57 and quad Cortex-A53). The TM2 and TM2E are the Samsung board
based on Exynos5433 SoC.
I tested the display controller by using the modetest tool.
But, Samsung s6e3ha2 panel driver has not yet posted. So, the TM2 dts file
don't include the panel Device Tree node. I'll post the s6e3ha2 panel driver
on separate patch with a dt patch.
Changes from v2:
(https://lkml.org/lkml/2016/8/24/426)
- Add new pctl_base and eint_base instead of virt_base on patch1.
- Modify the documentation of pinctrl-samsung.txt on patch1.
- Modify the cooling level for big.LITTLE cores.
- Use the GIC_SPI definition on dtsi file.
- Removes the unneeded 'regulator-always-on' property.
- Fix the kbuild report of the compatible string for TM2/TM2E patches.
- Two patches(exynos-mct, exynos5433-pmu) were merged.
- Add the reviewed-by tag of Javier Martinez Canillas on patch3/4/5
- Add the reviewed-by tag of Krzysztof Kozlowski on patch4/5
- Add the acked-by tag of Rob Herring on patch5
- Fix the minor issues.
Changes from v1:
(https://lkml.org/lkml/2016/8/16/61)
- Merge the cpufreq patch for exynos5433[3] on PM/cpufreq tree.
- Add new patch to support the multiple IORESOURCE_MAP for samsung pinctrl driver.
- Drop the SYSMMU Device-Tree node which will be posted by Marek Szyprowski.
- Fix the code clean issue by Krzysztof Kozlowski and Rob Herring's comment.
- Delete the unnecessary alias from exynos5433-tm2.dts.
- Expand the range of cooling level of CPU device.
- Update the binding method of 'Exynos5433 audio subsystem'
Depends on:
This patchset are based on v4.9-rc3.
Chanwoo Choi (5):
pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank
pinctrl: samsung: Add GPF support for Exynos5433
arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC
arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board
.../bindings/arm/samsung/samsung-boards.txt | 2 +
.../bindings/pinctrl/samsung-pinctrl.txt | 19 +
arch/arm64/boot/dts/exynos/Makefile | 5 +-
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 794 ++++++++++++
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 974 ++++++++++++++
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 41 +
.../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 23 +
.../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 296 +++++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1356 ++++++++++++++++++++
drivers/pinctrl/samsung/pinctrl-exynos.c | 45 +-
drivers/pinctrl/samsung/pinctrl-exynos.h | 11 +
drivers/pinctrl/samsung/pinctrl-samsung.c | 40 +-
drivers/pinctrl/samsung/pinctrl-samsung.h | 10 +-
14 files changed, 3598 insertions(+), 40 deletions(-)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
--
1.9.1
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 0/5] arm64: dts: Add the dts file for Exynos5433 and TM/TM2E board
@ 2016-11-03 6:39 ` Chanwoo Choi
0 siblings, 0 replies; 43+ messages in thread
From: Chanwoo Choi @ 2016-11-03 6:39 UTC (permalink / raw)
To: linux-arm-kernel
This patchset adds the Device Tree file for Samsung 64-bit Exynos5433 SoC
and TM/TM2E board based on Exynos5433. The Exynos5433 has Octa-core CPUs
(quad Cortex-A57 and quad Cortex-A53). The TM2 and TM2E are the Samsung board
based on Exynos5433 SoC.
I tested the display controller by using the modetest tool.
But, Samsung s6e3ha2 panel driver has not yet posted. So, the TM2 dts file
don't include the panel Device Tree node. I'll post the s6e3ha2 panel driver
on separate patch with a dt patch.
Changes from v2:
(https://lkml.org/lkml/2016/8/24/426)
- Add new pctl_base and eint_base instead of virt_base on patch1.
- Modify the documentation of pinctrl-samsung.txt on patch1.
- Modify the cooling level for big.LITTLE cores.
- Use the GIC_SPI definition on dtsi file.
- Removes the unneeded 'regulator-always-on' property.
- Fix the kbuild report of the compatible string for TM2/TM2E patches.
- Two patches(exynos-mct, exynos5433-pmu) were merged.
- Add the reviewed-by tag of Javier Martinez Canillas on patch3/4/5
- Add the reviewed-by tag of Krzysztof Kozlowski on patch4/5
- Add the acked-by tag of Rob Herring on patch5
- Fix the minor issues.
Changes from v1:
(https://lkml.org/lkml/2016/8/16/61)
- Merge the cpufreq patch for exynos5433[3] on PM/cpufreq tree.
- Add new patch to support the multiple IORESOURCE_MAP for samsung pinctrl driver.
- Drop the SYSMMU Device-Tree node which will be posted by Marek Szyprowski.
- Fix the code clean issue by Krzysztof Kozlowski and Rob Herring's comment.
- Delete the unnecessary alias from exynos5433-tm2.dts.
- Expand the range of cooling level of CPU device.
- Update the binding method of 'Exynos5433 audio subsystem'
Depends on:
This patchset are based on v4.9-rc3.
Chanwoo Choi (5):
pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank
pinctrl: samsung: Add GPF support for Exynos5433
arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC
arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board
.../bindings/arm/samsung/samsung-boards.txt | 2 +
.../bindings/pinctrl/samsung-pinctrl.txt | 19 +
arch/arm64/boot/dts/exynos/Makefile | 5 +-
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 794 ++++++++++++
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 974 ++++++++++++++
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 41 +
.../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 23 +
.../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 296 +++++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1356 ++++++++++++++++++++
drivers/pinctrl/samsung/pinctrl-exynos.c | 45 +-
drivers/pinctrl/samsung/pinctrl-exynos.h | 11 +
drivers/pinctrl/samsung/pinctrl-samsung.c | 40 +-
drivers/pinctrl/samsung/pinctrl-samsung.h | 10 +-
14 files changed, 3598 insertions(+), 40 deletions(-)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
--
1.9.1
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 1/5] pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank
2016-11-03 6:39 ` Chanwoo Choi
@ 2016-11-03 6:39 ` Chanwoo Choi
-1 siblings, 0 replies; 43+ messages in thread
From: Chanwoo Choi @ 2016-11-03 6:39 UTC (permalink / raw)
To: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel
Cc: cw00.choi, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, andi.shyti,
chanwoo, Tomasz Figa, Linus Walleij, linux-gpio
This patch supports the multiple IORESOURCE_MEM resources for one pin-bank.
In the pre-existing Exynos series, the registers of the gpio bank are included
in the one memory map. But, some gpio bank need to support the one more memory
map (IORESOURCE_MEM) because the registers of gpio bank are separated into
the different memory map.
For example,
The both ALIVE and IMEM domain have the different memory base address.
The GFP[1-5] of exynos5433 are composed as following:
- ALIVE domain : WEINT_* registers
- IMEM domain : CON/DAT/PUD/DRV/CONPDN/PUDPDN register
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-gpio@vger.kernel.org
Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
.../bindings/pinctrl/samsung-pinctrl.txt | 19 ++++++++++
drivers/pinctrl/samsung/pinctrl-exynos.c | 39 +++++++++------------
drivers/pinctrl/samsung/pinctrl-exynos.h | 11 ++++++
drivers/pinctrl/samsung/pinctrl-samsung.c | 40 ++++++++++++++--------
drivers/pinctrl/samsung/pinctrl-samsung.h | 10 ++++--
5 files changed, 80 insertions(+), 39 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index d49e22d2a8b5..1baf19eecabf 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -19,11 +19,30 @@ Required Properties:
- "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
- "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
- "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
+ - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller.
- "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
- reg: Base address of the pin controller hardware module and length of
the address space it occupies.
+ - reg: Second base address of the pin controller if the specific registers
+ of the pin controller are separated into the different base address.
+
+ Eg: GPF[1-5] of Exynos5433 are separated into the two base address.
+ - First base address is for GPAx and GPF[1-5] external interrupt
+ registers.
+ - Second base address is for GPF[1-5] pinctrl registers.
+
+ pinctrl_0: pinctrl@10580000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos7-wakeup-eint";
+ interrupts = <0 16 0>;
+ };
+ };
+
- Pin banks as child nodes: Pin banks of the controller are represented by child
nodes of the controller node. Bank name is taken from name of the node. Each
bank node must contain following properties:
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index d32fa2b5ff82..d657b52dfdb5 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -61,16 +61,15 @@ static void exynos_irq_mask(struct irq_data *irqd)
struct irq_chip *chip = irq_data_get_irq_chip(irqd);
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
- struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_mask = our_chip->eint_mask + bank->eint_offset;
unsigned long mask;
unsigned long flags;
spin_lock_irqsave(&bank->slock, flags);
- mask = readl(d->virt_base + reg_mask);
+ mask = readl(bank->eint_base + reg_mask);
mask |= 1 << irqd->hwirq;
- writel(mask, d->virt_base + reg_mask);
+ writel(mask, bank->eint_base + reg_mask);
spin_unlock_irqrestore(&bank->slock, flags);
}
@@ -80,10 +79,9 @@ static void exynos_irq_ack(struct irq_data *irqd)
struct irq_chip *chip = irq_data_get_irq_chip(irqd);
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
- struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_pend = our_chip->eint_pend + bank->eint_offset;
- writel(1 << irqd->hwirq, d->virt_base + reg_pend);
+ writel(1 << irqd->hwirq, bank->eint_base + reg_pend);
}
static void exynos_irq_unmask(struct irq_data *irqd)
@@ -91,7 +89,6 @@ static void exynos_irq_unmask(struct irq_data *irqd)
struct irq_chip *chip = irq_data_get_irq_chip(irqd);
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
- struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_mask = our_chip->eint_mask + bank->eint_offset;
unsigned long mask;
unsigned long flags;
@@ -109,9 +106,9 @@ static void exynos_irq_unmask(struct irq_data *irqd)
spin_lock_irqsave(&bank->slock, flags);
- mask = readl(d->virt_base + reg_mask);
+ mask = readl(bank->eint_base + reg_mask);
mask &= ~(1 << irqd->hwirq);
- writel(mask, d->virt_base + reg_mask);
+ writel(mask, bank->eint_base + reg_mask);
spin_unlock_irqrestore(&bank->slock, flags);
}
@@ -121,7 +118,6 @@ static int exynos_irq_set_type(struct irq_data *irqd, unsigned int type)
struct irq_chip *chip = irq_data_get_irq_chip(irqd);
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
- struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned int shift = EXYNOS_EINT_CON_LEN * irqd->hwirq;
unsigned int con, trig_type;
unsigned long reg_con = our_chip->eint_con + bank->eint_offset;
@@ -152,10 +148,10 @@ static int exynos_irq_set_type(struct irq_data *irqd, unsigned int type)
else
irq_set_handler_locked(irqd, handle_level_irq);
- con = readl(d->virt_base + reg_con);
+ con = readl(bank->eint_base + reg_con);
con &= ~(EXYNOS_EINT_CON_MASK << shift);
con |= trig_type << shift;
- writel(con, d->virt_base + reg_con);
+ writel(con, bank->eint_base + reg_con);
return 0;
}
@@ -166,7 +162,6 @@ static int exynos_irq_request_resources(struct irq_data *irqd)
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
const struct samsung_pin_bank_type *bank_type = bank->type;
- struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned int shift = EXYNOS_EINT_CON_LEN * irqd->hwirq;
unsigned long reg_con = our_chip->eint_con + bank->eint_offset;
unsigned long flags;
@@ -188,10 +183,10 @@ static int exynos_irq_request_resources(struct irq_data *irqd)
spin_lock_irqsave(&bank->slock, flags);
- con = readl(d->virt_base + reg_con);
+ con = readl(bank->eint_base + reg_con);
con &= ~(mask << shift);
con |= EXYNOS_EINT_FUNC << shift;
- writel(con, d->virt_base + reg_con);
+ writel(con, bank->eint_base + reg_con);
spin_unlock_irqrestore(&bank->slock, flags);
@@ -206,7 +201,6 @@ static void exynos_irq_release_resources(struct irq_data *irqd)
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
const struct samsung_pin_bank_type *bank_type = bank->type;
- struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned int shift = EXYNOS_EINT_CON_LEN * irqd->hwirq;
unsigned long reg_con = our_chip->eint_con + bank->eint_offset;
unsigned long flags;
@@ -221,10 +215,10 @@ static void exynos_irq_release_resources(struct irq_data *irqd)
spin_lock_irqsave(&bank->slock, flags);
- con = readl(d->virt_base + reg_con);
+ con = readl(bank->eint_base + reg_con);
con &= ~(mask << shift);
con |= FUNC_INPUT << shift;
- writel(con, d->virt_base + reg_con);
+ writel(con, bank->eint_base + reg_con);
spin_unlock_irqrestore(&bank->slock, flags);
@@ -274,7 +268,7 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
struct samsung_pin_bank *bank = d->pin_banks;
unsigned int svc, group, pin, virq;
- svc = readl(d->virt_base + EXYNOS_SVC_OFFSET);
+ svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
group = EXYNOS_SVC_GROUP(svc);
pin = svc & EXYNOS_SVC_NUM_MASK;
@@ -452,7 +446,6 @@ static void exynos_irq_demux_eint16_31(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
struct exynos_muxed_weint_data *eintd = irq_desc_get_handler_data(desc);
- struct samsung_pinctrl_drv_data *d = eintd->banks[0]->drvdata;
unsigned long pend;
unsigned long mask;
int i;
@@ -461,9 +454,9 @@ static void exynos_irq_demux_eint16_31(struct irq_desc *desc)
for (i = 0; i < eintd->nr_banks; ++i) {
struct samsung_pin_bank *b = eintd->banks[i];
- pend = readl(d->virt_base + b->irq_chip->eint_pend
+ pend = readl(b->eint_base + b->irq_chip->eint_pend
+ b->eint_offset);
- mask = readl(d->virt_base + b->irq_chip->eint_mask
+ mask = readl(b->eint_base + b->irq_chip->eint_mask
+ b->eint_offset);
exynos_irq_demux_eint(pend & ~mask, b->irq_domain);
}
@@ -581,7 +574,7 @@ static void exynos_pinctrl_suspend_bank(
struct samsung_pin_bank *bank)
{
struct exynos_eint_gpio_save *save = bank->soc_priv;
- void __iomem *regs = drvdata->virt_base;
+ void __iomem *regs = bank->eint_base;
save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET
+ bank->eint_offset);
@@ -610,7 +603,7 @@ static void exynos_pinctrl_resume_bank(
struct samsung_pin_bank *bank)
{
struct exynos_eint_gpio_save *save = bank->soc_priv;
- void __iomem *regs = drvdata->virt_base;
+ void __iomem *regs = bank->eint_base;
pr_debug("%s: con %#010x => %#010x\n", bank->name,
readl(regs + EXYNOS_GPIO_ECON_OFFSET
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
index 0f0f7cedb2dc..5821525a2c84 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.h
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
@@ -79,6 +79,17 @@
.name = id \
}
+#define EXYNOS_PIN_BANK_EINTW_EXT(pins, reg, id, offs, pctl_idx) \
+ { \
+ .type = &bank_type_alive, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_WKUP, \
+ .eint_offset = offs, \
+ .name = id, \
+ .pctl_res_idx = pctl_idx, \
+ } \
+
/**
* struct exynos_weint_data: irq specific data for all the wakeup interrupts
* generated by the external wakeup interrupt controller.
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 620727fabe64..41e62391c33c 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -33,6 +33,9 @@
#include "../core.h"
#include "pinctrl-samsung.h"
+/* maximum number of the memory resources */
+#define SAMSUNG_PINCTRL_NUM_RESOURCES 2
+
/* list of all possible config options supported */
static struct pin_config {
const char *property;
@@ -345,7 +348,7 @@ static void pin_to_reg_bank(struct samsung_pinctrl_drv_data *drvdata,
((b->pin_base + b->nr_pins - 1) < pin))
b++;
- *reg = drvdata->virt_base + b->pctl_offset;
+ *reg = b->pctl_base + b->pctl_offset;
*offset = pin - b->pin_base;
if (bank)
*bank = b;
@@ -526,7 +529,7 @@ static void samsung_gpio_set_value(struct gpio_chip *gc,
void __iomem *reg;
u32 data;
- reg = bank->drvdata->virt_base + bank->pctl_offset;
+ reg = bank->pctl_base + bank->pctl_offset;
data = readl(reg + type->reg_offset[PINCFG_TYPE_DAT]);
data &= ~(1 << offset);
@@ -554,7 +557,7 @@ static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset)
struct samsung_pin_bank *bank = gpiochip_get_data(gc);
const struct samsung_pin_bank_type *type = bank->type;
- reg = bank->drvdata->virt_base + bank->pctl_offset;
+ reg = bank->pctl_base + bank->pctl_offset;
data = readl(reg + type->reg_offset[PINCFG_TYPE_DAT]);
data >>= offset;
@@ -581,8 +584,8 @@ static int samsung_gpio_set_direction(struct gpio_chip *gc,
type = bank->type;
drvdata = bank->drvdata;
- reg = drvdata->virt_base + bank->pctl_offset +
- type->reg_offset[PINCFG_TYPE_FUNC];
+ reg = bank->pctl_base + bank->pctl_offset
+ + type->reg_offset[PINCFG_TYPE_FUNC];
mask = (1 << type->fld_width[PINCFG_TYPE_FUNC]) - 1;
shift = offset * type->fld_width[PINCFG_TYPE_FUNC];
@@ -979,6 +982,8 @@ static int samsung_gpiolib_unregister(struct platform_device *pdev,
const struct samsung_pin_bank_data *bdata;
const struct samsung_pin_ctrl *ctrl;
struct samsung_pin_bank *bank;
+ struct resource *res;
+ void __iomem *virt_base[SAMSUNG_PINCTRL_NUM_RESOURCES];
int i;
id = of_alias_get_id(node, "pinctrl");
@@ -997,6 +1002,17 @@ static int samsung_gpiolib_unregister(struct platform_device *pdev,
if (!d->pin_banks)
return ERR_PTR(-ENOMEM);
+ if (ctrl->nr_ext_resources + 1 > SAMSUNG_PINCTRL_NUM_RESOURCES)
+ return ERR_PTR(-EINVAL);
+
+ for (i = 0; i < ctrl->nr_ext_resources + 1; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ virt_base[i] = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (IS_ERR(virt_base[i]))
+ return ERR_PTR(-EIO);
+ }
+
bank = d->pin_banks;
bdata = ctrl->pin_banks;
for (i = 0; i < ctrl->nr_banks; ++i, ++bdata, ++bank) {
@@ -1013,6 +1029,9 @@ static int samsung_gpiolib_unregister(struct platform_device *pdev,
bank->drvdata = d;
bank->pin_base = d->nr_pins;
d->nr_pins += bank->nr_pins;
+
+ bank->eint_base = virt_base[0];
+ bank->pctl_base = virt_base[bdata->pctl_res_idx];
}
for_each_child_of_node(node, np) {
@@ -1052,11 +1071,6 @@ static int samsung_pinctrl_probe(struct platform_device *pdev)
}
drvdata->dev = dev;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- drvdata->virt_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(drvdata->virt_base))
- return PTR_ERR(drvdata->virt_base);
-
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res)
drvdata->irq = res->start;
@@ -1094,12 +1108,11 @@ static int samsung_pinctrl_probe(struct platform_device *pdev)
static void samsung_pinctrl_suspend_dev(
struct samsung_pinctrl_drv_data *drvdata)
{
- void __iomem *virt_base = drvdata->virt_base;
int i;
for (i = 0; i < drvdata->nr_banks; i++) {
struct samsung_pin_bank *bank = &drvdata->pin_banks[i];
- void __iomem *reg = virt_base + bank->pctl_offset;
+ void __iomem *reg = bank->pctl_base + bank->pctl_offset;
const u8 *offs = bank->type->reg_offset;
const u8 *widths = bank->type->fld_width;
enum pincfg_type type;
@@ -1140,7 +1153,6 @@ static void samsung_pinctrl_suspend_dev(
*/
static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata)
{
- void __iomem *virt_base = drvdata->virt_base;
int i;
if (drvdata->resume)
@@ -1148,7 +1160,7 @@ static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata)
for (i = 0; i < drvdata->nr_banks; i++) {
struct samsung_pin_bank *bank = &drvdata->pin_banks[i];
- void __iomem *reg = virt_base + bank->pctl_offset;
+ void __iomem *reg = bank->pctl_base + bank->pctl_offset;
const u8 *offs = bank->type->reg_offset;
const u8 *widths = bank->type->fld_width;
enum pincfg_type type;
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index cd31bfaf62cb..043cb6c11180 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -116,6 +116,7 @@ struct samsung_pin_bank_type {
* struct samsung_pin_bank_data: represent a controller pin-bank (init data).
* @type: type of the bank (register offsets and bitfield widths)
* @pctl_offset: starting offset of the pin-bank registers.
+ * @pctl_res_idx: index of base address for pin-bank registers.
* @nr_pins: number of pins included in this bank.
* @eint_func: function to set in CON register to configure pin as EINT.
* @eint_type: type of the external interrupt supported by the bank.
@@ -126,6 +127,7 @@ struct samsung_pin_bank_type {
struct samsung_pin_bank_data {
const struct samsung_pin_bank_type *type;
u32 pctl_offset;
+ u8 pctl_res_idx;
u8 nr_pins;
u8 eint_func;
enum eint_type eint_type;
@@ -137,8 +139,10 @@ struct samsung_pin_bank_data {
/**
* struct samsung_pin_bank: represent a controller pin-bank.
* @type: type of the bank (register offsets and bitfield widths)
+ * @pctl_base: base address of the pin-bank registers
* @pctl_offset: starting offset of the pin-bank registers.
* @nr_pins: number of pins included in this bank.
+ * @eint_base: base address of the pin-bank EINT registers.
* @eint_func: function to set in CON register to configure pin as EINT.
* @eint_type: type of the external interrupt supported by the bank.
* @eint_mask: bit mask of pins which support EINT function.
@@ -157,8 +161,10 @@ struct samsung_pin_bank_data {
*/
struct samsung_pin_bank {
const struct samsung_pin_bank_type *type;
+ void __iomem *pctl_base;
u32 pctl_offset;
u8 nr_pins;
+ void __iomem *eint_base;
u8 eint_func;
enum eint_type eint_type;
u32 eint_mask;
@@ -182,6 +188,7 @@ struct samsung_pin_bank {
* struct samsung_pin_ctrl: represent a pin controller.
* @pin_banks: list of pin banks included in this controller.
* @nr_banks: number of pin banks.
+ * @nr_ext_resources: number of the extra base address for pin banks.
* @eint_gpio_init: platform specific callback to setup the external gpio
* interrupts for the controller.
* @eint_wkup_init: platform specific callback to setup the external wakeup
@@ -190,6 +197,7 @@ struct samsung_pin_bank {
struct samsung_pin_ctrl {
const struct samsung_pin_bank_data *pin_banks;
u32 nr_banks;
+ int nr_ext_resources;
int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
@@ -200,7 +208,6 @@ struct samsung_pin_ctrl {
/**
* struct samsung_pinctrl_drv_data: wrapper for holding driver data together.
* @node: global list node
- * @virt_base: register base address of the controller.
* @dev: device instance representing the controller.
* @irq: interrpt number used by the controller to notify gpio interrupts.
* @ctrl: pin controller instance managed by the driver.
@@ -215,7 +222,6 @@ struct samsung_pin_ctrl {
*/
struct samsung_pinctrl_drv_data {
struct list_head node;
- void __iomem *virt_base;
struct device *dev;
int irq;
--
1.9.1
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v3 1/5] pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank
@ 2016-11-03 6:39 ` Chanwoo Choi
0 siblings, 0 replies; 43+ messages in thread
From: Chanwoo Choi @ 2016-11-03 6:39 UTC (permalink / raw)
To: linux-arm-kernel
This patch supports the multiple IORESOURCE_MEM resources for one pin-bank.
In the pre-existing Exynos series, the registers of the gpio bank are included
in the one memory map. But, some gpio bank need to support the one more memory
map (IORESOURCE_MEM) because the registers of gpio bank are separated into
the different memory map.
For example,
The both ALIVE and IMEM domain have the different memory base address.
The GFP[1-5] of exynos5433 are composed as following:
- ALIVE domain : WEINT_* registers
- IMEM domain : CON/DAT/PUD/DRV/CONPDN/PUDPDN register
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-gpio at vger.kernel.org
Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
.../bindings/pinctrl/samsung-pinctrl.txt | 19 ++++++++++
drivers/pinctrl/samsung/pinctrl-exynos.c | 39 +++++++++------------
drivers/pinctrl/samsung/pinctrl-exynos.h | 11 ++++++
drivers/pinctrl/samsung/pinctrl-samsung.c | 40 ++++++++++++++--------
drivers/pinctrl/samsung/pinctrl-samsung.h | 10 ++++--
5 files changed, 80 insertions(+), 39 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index d49e22d2a8b5..1baf19eecabf 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -19,11 +19,30 @@ Required Properties:
- "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
- "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
- "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
+ - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller.
- "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
- reg: Base address of the pin controller hardware module and length of
the address space it occupies.
+ - reg: Second base address of the pin controller if the specific registers
+ of the pin controller are separated into the different base address.
+
+ Eg: GPF[1-5] of Exynos5433 are separated into the two base address.
+ - First base address is for GPAx and GPF[1-5] external interrupt
+ registers.
+ - Second base address is for GPF[1-5] pinctrl registers.
+
+ pinctrl_0: pinctrl at 10580000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos7-wakeup-eint";
+ interrupts = <0 16 0>;
+ };
+ };
+
- Pin banks as child nodes: Pin banks of the controller are represented by child
nodes of the controller node. Bank name is taken from name of the node. Each
bank node must contain following properties:
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index d32fa2b5ff82..d657b52dfdb5 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -61,16 +61,15 @@ static void exynos_irq_mask(struct irq_data *irqd)
struct irq_chip *chip = irq_data_get_irq_chip(irqd);
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
- struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_mask = our_chip->eint_mask + bank->eint_offset;
unsigned long mask;
unsigned long flags;
spin_lock_irqsave(&bank->slock, flags);
- mask = readl(d->virt_base + reg_mask);
+ mask = readl(bank->eint_base + reg_mask);
mask |= 1 << irqd->hwirq;
- writel(mask, d->virt_base + reg_mask);
+ writel(mask, bank->eint_base + reg_mask);
spin_unlock_irqrestore(&bank->slock, flags);
}
@@ -80,10 +79,9 @@ static void exynos_irq_ack(struct irq_data *irqd)
struct irq_chip *chip = irq_data_get_irq_chip(irqd);
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
- struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_pend = our_chip->eint_pend + bank->eint_offset;
- writel(1 << irqd->hwirq, d->virt_base + reg_pend);
+ writel(1 << irqd->hwirq, bank->eint_base + reg_pend);
}
static void exynos_irq_unmask(struct irq_data *irqd)
@@ -91,7 +89,6 @@ static void exynos_irq_unmask(struct irq_data *irqd)
struct irq_chip *chip = irq_data_get_irq_chip(irqd);
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
- struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_mask = our_chip->eint_mask + bank->eint_offset;
unsigned long mask;
unsigned long flags;
@@ -109,9 +106,9 @@ static void exynos_irq_unmask(struct irq_data *irqd)
spin_lock_irqsave(&bank->slock, flags);
- mask = readl(d->virt_base + reg_mask);
+ mask = readl(bank->eint_base + reg_mask);
mask &= ~(1 << irqd->hwirq);
- writel(mask, d->virt_base + reg_mask);
+ writel(mask, bank->eint_base + reg_mask);
spin_unlock_irqrestore(&bank->slock, flags);
}
@@ -121,7 +118,6 @@ static int exynos_irq_set_type(struct irq_data *irqd, unsigned int type)
struct irq_chip *chip = irq_data_get_irq_chip(irqd);
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
- struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned int shift = EXYNOS_EINT_CON_LEN * irqd->hwirq;
unsigned int con, trig_type;
unsigned long reg_con = our_chip->eint_con + bank->eint_offset;
@@ -152,10 +148,10 @@ static int exynos_irq_set_type(struct irq_data *irqd, unsigned int type)
else
irq_set_handler_locked(irqd, handle_level_irq);
- con = readl(d->virt_base + reg_con);
+ con = readl(bank->eint_base + reg_con);
con &= ~(EXYNOS_EINT_CON_MASK << shift);
con |= trig_type << shift;
- writel(con, d->virt_base + reg_con);
+ writel(con, bank->eint_base + reg_con);
return 0;
}
@@ -166,7 +162,6 @@ static int exynos_irq_request_resources(struct irq_data *irqd)
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
const struct samsung_pin_bank_type *bank_type = bank->type;
- struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned int shift = EXYNOS_EINT_CON_LEN * irqd->hwirq;
unsigned long reg_con = our_chip->eint_con + bank->eint_offset;
unsigned long flags;
@@ -188,10 +183,10 @@ static int exynos_irq_request_resources(struct irq_data *irqd)
spin_lock_irqsave(&bank->slock, flags);
- con = readl(d->virt_base + reg_con);
+ con = readl(bank->eint_base + reg_con);
con &= ~(mask << shift);
con |= EXYNOS_EINT_FUNC << shift;
- writel(con, d->virt_base + reg_con);
+ writel(con, bank->eint_base + reg_con);
spin_unlock_irqrestore(&bank->slock, flags);
@@ -206,7 +201,6 @@ static void exynos_irq_release_resources(struct irq_data *irqd)
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
const struct samsung_pin_bank_type *bank_type = bank->type;
- struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned int shift = EXYNOS_EINT_CON_LEN * irqd->hwirq;
unsigned long reg_con = our_chip->eint_con + bank->eint_offset;
unsigned long flags;
@@ -221,10 +215,10 @@ static void exynos_irq_release_resources(struct irq_data *irqd)
spin_lock_irqsave(&bank->slock, flags);
- con = readl(d->virt_base + reg_con);
+ con = readl(bank->eint_base + reg_con);
con &= ~(mask << shift);
con |= FUNC_INPUT << shift;
- writel(con, d->virt_base + reg_con);
+ writel(con, bank->eint_base + reg_con);
spin_unlock_irqrestore(&bank->slock, flags);
@@ -274,7 +268,7 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
struct samsung_pin_bank *bank = d->pin_banks;
unsigned int svc, group, pin, virq;
- svc = readl(d->virt_base + EXYNOS_SVC_OFFSET);
+ svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
group = EXYNOS_SVC_GROUP(svc);
pin = svc & EXYNOS_SVC_NUM_MASK;
@@ -452,7 +446,6 @@ static void exynos_irq_demux_eint16_31(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
struct exynos_muxed_weint_data *eintd = irq_desc_get_handler_data(desc);
- struct samsung_pinctrl_drv_data *d = eintd->banks[0]->drvdata;
unsigned long pend;
unsigned long mask;
int i;
@@ -461,9 +454,9 @@ static void exynos_irq_demux_eint16_31(struct irq_desc *desc)
for (i = 0; i < eintd->nr_banks; ++i) {
struct samsung_pin_bank *b = eintd->banks[i];
- pend = readl(d->virt_base + b->irq_chip->eint_pend
+ pend = readl(b->eint_base + b->irq_chip->eint_pend
+ b->eint_offset);
- mask = readl(d->virt_base + b->irq_chip->eint_mask
+ mask = readl(b->eint_base + b->irq_chip->eint_mask
+ b->eint_offset);
exynos_irq_demux_eint(pend & ~mask, b->irq_domain);
}
@@ -581,7 +574,7 @@ static void exynos_pinctrl_suspend_bank(
struct samsung_pin_bank *bank)
{
struct exynos_eint_gpio_save *save = bank->soc_priv;
- void __iomem *regs = drvdata->virt_base;
+ void __iomem *regs = bank->eint_base;
save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET
+ bank->eint_offset);
@@ -610,7 +603,7 @@ static void exynos_pinctrl_resume_bank(
struct samsung_pin_bank *bank)
{
struct exynos_eint_gpio_save *save = bank->soc_priv;
- void __iomem *regs = drvdata->virt_base;
+ void __iomem *regs = bank->eint_base;
pr_debug("%s: con %#010x => %#010x\n", bank->name,
readl(regs + EXYNOS_GPIO_ECON_OFFSET
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
index 0f0f7cedb2dc..5821525a2c84 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.h
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
@@ -79,6 +79,17 @@
.name = id \
}
+#define EXYNOS_PIN_BANK_EINTW_EXT(pins, reg, id, offs, pctl_idx) \
+ { \
+ .type = &bank_type_alive, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_WKUP, \
+ .eint_offset = offs, \
+ .name = id, \
+ .pctl_res_idx = pctl_idx, \
+ } \
+
/**
* struct exynos_weint_data: irq specific data for all the wakeup interrupts
* generated by the external wakeup interrupt controller.
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 620727fabe64..41e62391c33c 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -33,6 +33,9 @@
#include "../core.h"
#include "pinctrl-samsung.h"
+/* maximum number of the memory resources */
+#define SAMSUNG_PINCTRL_NUM_RESOURCES 2
+
/* list of all possible config options supported */
static struct pin_config {
const char *property;
@@ -345,7 +348,7 @@ static void pin_to_reg_bank(struct samsung_pinctrl_drv_data *drvdata,
((b->pin_base + b->nr_pins - 1) < pin))
b++;
- *reg = drvdata->virt_base + b->pctl_offset;
+ *reg = b->pctl_base + b->pctl_offset;
*offset = pin - b->pin_base;
if (bank)
*bank = b;
@@ -526,7 +529,7 @@ static void samsung_gpio_set_value(struct gpio_chip *gc,
void __iomem *reg;
u32 data;
- reg = bank->drvdata->virt_base + bank->pctl_offset;
+ reg = bank->pctl_base + bank->pctl_offset;
data = readl(reg + type->reg_offset[PINCFG_TYPE_DAT]);
data &= ~(1 << offset);
@@ -554,7 +557,7 @@ static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset)
struct samsung_pin_bank *bank = gpiochip_get_data(gc);
const struct samsung_pin_bank_type *type = bank->type;
- reg = bank->drvdata->virt_base + bank->pctl_offset;
+ reg = bank->pctl_base + bank->pctl_offset;
data = readl(reg + type->reg_offset[PINCFG_TYPE_DAT]);
data >>= offset;
@@ -581,8 +584,8 @@ static int samsung_gpio_set_direction(struct gpio_chip *gc,
type = bank->type;
drvdata = bank->drvdata;
- reg = drvdata->virt_base + bank->pctl_offset +
- type->reg_offset[PINCFG_TYPE_FUNC];
+ reg = bank->pctl_base + bank->pctl_offset
+ + type->reg_offset[PINCFG_TYPE_FUNC];
mask = (1 << type->fld_width[PINCFG_TYPE_FUNC]) - 1;
shift = offset * type->fld_width[PINCFG_TYPE_FUNC];
@@ -979,6 +982,8 @@ static int samsung_gpiolib_unregister(struct platform_device *pdev,
const struct samsung_pin_bank_data *bdata;
const struct samsung_pin_ctrl *ctrl;
struct samsung_pin_bank *bank;
+ struct resource *res;
+ void __iomem *virt_base[SAMSUNG_PINCTRL_NUM_RESOURCES];
int i;
id = of_alias_get_id(node, "pinctrl");
@@ -997,6 +1002,17 @@ static int samsung_gpiolib_unregister(struct platform_device *pdev,
if (!d->pin_banks)
return ERR_PTR(-ENOMEM);
+ if (ctrl->nr_ext_resources + 1 > SAMSUNG_PINCTRL_NUM_RESOURCES)
+ return ERR_PTR(-EINVAL);
+
+ for (i = 0; i < ctrl->nr_ext_resources + 1; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ virt_base[i] = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (IS_ERR(virt_base[i]))
+ return ERR_PTR(-EIO);
+ }
+
bank = d->pin_banks;
bdata = ctrl->pin_banks;
for (i = 0; i < ctrl->nr_banks; ++i, ++bdata, ++bank) {
@@ -1013,6 +1029,9 @@ static int samsung_gpiolib_unregister(struct platform_device *pdev,
bank->drvdata = d;
bank->pin_base = d->nr_pins;
d->nr_pins += bank->nr_pins;
+
+ bank->eint_base = virt_base[0];
+ bank->pctl_base = virt_base[bdata->pctl_res_idx];
}
for_each_child_of_node(node, np) {
@@ -1052,11 +1071,6 @@ static int samsung_pinctrl_probe(struct platform_device *pdev)
}
drvdata->dev = dev;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- drvdata->virt_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(drvdata->virt_base))
- return PTR_ERR(drvdata->virt_base);
-
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res)
drvdata->irq = res->start;
@@ -1094,12 +1108,11 @@ static int samsung_pinctrl_probe(struct platform_device *pdev)
static void samsung_pinctrl_suspend_dev(
struct samsung_pinctrl_drv_data *drvdata)
{
- void __iomem *virt_base = drvdata->virt_base;
int i;
for (i = 0; i < drvdata->nr_banks; i++) {
struct samsung_pin_bank *bank = &drvdata->pin_banks[i];
- void __iomem *reg = virt_base + bank->pctl_offset;
+ void __iomem *reg = bank->pctl_base + bank->pctl_offset;
const u8 *offs = bank->type->reg_offset;
const u8 *widths = bank->type->fld_width;
enum pincfg_type type;
@@ -1140,7 +1153,6 @@ static void samsung_pinctrl_suspend_dev(
*/
static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata)
{
- void __iomem *virt_base = drvdata->virt_base;
int i;
if (drvdata->resume)
@@ -1148,7 +1160,7 @@ static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata)
for (i = 0; i < drvdata->nr_banks; i++) {
struct samsung_pin_bank *bank = &drvdata->pin_banks[i];
- void __iomem *reg = virt_base + bank->pctl_offset;
+ void __iomem *reg = bank->pctl_base + bank->pctl_offset;
const u8 *offs = bank->type->reg_offset;
const u8 *widths = bank->type->fld_width;
enum pincfg_type type;
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index cd31bfaf62cb..043cb6c11180 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -116,6 +116,7 @@ struct samsung_pin_bank_type {
* struct samsung_pin_bank_data: represent a controller pin-bank (init data).
* @type: type of the bank (register offsets and bitfield widths)
* @pctl_offset: starting offset of the pin-bank registers.
+ * @pctl_res_idx: index of base address for pin-bank registers.
* @nr_pins: number of pins included in this bank.
* @eint_func: function to set in CON register to configure pin as EINT.
* @eint_type: type of the external interrupt supported by the bank.
@@ -126,6 +127,7 @@ struct samsung_pin_bank_type {
struct samsung_pin_bank_data {
const struct samsung_pin_bank_type *type;
u32 pctl_offset;
+ u8 pctl_res_idx;
u8 nr_pins;
u8 eint_func;
enum eint_type eint_type;
@@ -137,8 +139,10 @@ struct samsung_pin_bank_data {
/**
* struct samsung_pin_bank: represent a controller pin-bank.
* @type: type of the bank (register offsets and bitfield widths)
+ * @pctl_base: base address of the pin-bank registers
* @pctl_offset: starting offset of the pin-bank registers.
* @nr_pins: number of pins included in this bank.
+ * @eint_base: base address of the pin-bank EINT registers.
* @eint_func: function to set in CON register to configure pin as EINT.
* @eint_type: type of the external interrupt supported by the bank.
* @eint_mask: bit mask of pins which support EINT function.
@@ -157,8 +161,10 @@ struct samsung_pin_bank_data {
*/
struct samsung_pin_bank {
const struct samsung_pin_bank_type *type;
+ void __iomem *pctl_base;
u32 pctl_offset;
u8 nr_pins;
+ void __iomem *eint_base;
u8 eint_func;
enum eint_type eint_type;
u32 eint_mask;
@@ -182,6 +188,7 @@ struct samsung_pin_bank {
* struct samsung_pin_ctrl: represent a pin controller.
* @pin_banks: list of pin banks included in this controller.
* @nr_banks: number of pin banks.
+ * @nr_ext_resources: number of the extra base address for pin banks.
* @eint_gpio_init: platform specific callback to setup the external gpio
* interrupts for the controller.
* @eint_wkup_init: platform specific callback to setup the external wakeup
@@ -190,6 +197,7 @@ struct samsung_pin_bank {
struct samsung_pin_ctrl {
const struct samsung_pin_bank_data *pin_banks;
u32 nr_banks;
+ int nr_ext_resources;
int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
@@ -200,7 +208,6 @@ struct samsung_pin_ctrl {
/**
* struct samsung_pinctrl_drv_data: wrapper for holding driver data together.
* @node: global list node
- * @virt_base: register base address of the controller.
* @dev: device instance representing the controller.
* @irq: interrpt number used by the controller to notify gpio interrupts.
* @ctrl: pin controller instance managed by the driver.
@@ -215,7 +222,6 @@ struct samsung_pin_ctrl {
*/
struct samsung_pinctrl_drv_data {
struct list_head node;
- void __iomem *virt_base;
struct device *dev;
int irq;
--
1.9.1
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v3 2/5] pinctrl: samsung: Add GPF support for Exynos5433
2016-11-03 6:39 ` Chanwoo Choi
(?)
@ 2016-11-03 6:39 ` Chanwoo Choi
-1 siblings, 0 replies; 43+ messages in thread
From: Chanwoo Choi @ 2016-11-03 6:39 UTC (permalink / raw)
To: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel
Cc: inki.dae, jonghwa3.lee, s.nawrocki, jy0922.shim, a.hajda,
jaewon02.kim, Linus Walleij, sw0312.kim, Tomasz Figa, andi.shyti,
jh80.chung, cw00.choi, human.hwang, linux-gpio, chanwoo,
ingi2.kim, m.szyprowski, beomho.seo, ideal.song
This patch add the support of GPF[1-5] pin of Exynos5433 SoC. The GPFx need
to support the multiple memory map because the registers of GPFx are located
in the different domain.
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
drivers/pinctrl/samsung/pinctrl-exynos.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index d657b52dfdb5..12f7d1eb65bc 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -1339,6 +1339,11 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
+ EXYNOS_PIN_BANK_EINTW_EXT(8, 0x020, "gpf1", 0x1004, 1),
+ EXYNOS_PIN_BANK_EINTW_EXT(4, 0x040, "gpf2", 0x1008, 1),
+ EXYNOS_PIN_BANK_EINTW_EXT(4, 0x060, "gpf3", 0x100c, 1),
+ EXYNOS_PIN_BANK_EINTW_EXT(8, 0x080, "gpf4", 0x1010, 1),
+ EXYNOS_PIN_BANK_EINTW_EXT(8, 0x0a0, "gpf5", 0x1014, 1),
};
/* pin banks of exynos5433 pin-controller - AUD */
@@ -1420,6 +1425,7 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
+ .nr_ext_resources = 1,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos5433_pin_banks1,
--
1.9.1
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v3 2/5] pinctrl: samsung: Add GPF support for Exynos5433
@ 2016-11-03 6:39 ` Chanwoo Choi
0 siblings, 0 replies; 43+ messages in thread
From: Chanwoo Choi @ 2016-11-03 6:39 UTC (permalink / raw)
To: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel
Cc: cw00.choi, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, andi.shyti,
chanwoo, Tomasz Figa, Linus Walleij, linux-gpio
This patch add the support of GPF[1-5] pin of Exynos5433 SoC. The GPFx need
to support the multiple memory map because the registers of GPFx are located
in the different domain.
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
drivers/pinctrl/samsung/pinctrl-exynos.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index d657b52dfdb5..12f7d1eb65bc 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -1339,6 +1339,11 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
+ EXYNOS_PIN_BANK_EINTW_EXT(8, 0x020, "gpf1", 0x1004, 1),
+ EXYNOS_PIN_BANK_EINTW_EXT(4, 0x040, "gpf2", 0x1008, 1),
+ EXYNOS_PIN_BANK_EINTW_EXT(4, 0x060, "gpf3", 0x100c, 1),
+ EXYNOS_PIN_BANK_EINTW_EXT(8, 0x080, "gpf4", 0x1010, 1),
+ EXYNOS_PIN_BANK_EINTW_EXT(8, 0x0a0, "gpf5", 0x1014, 1),
};
/* pin banks of exynos5433 pin-controller - AUD */
@@ -1420,6 +1425,7 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
+ .nr_ext_resources = 1,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos5433_pin_banks1,
--
1.9.1
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v3 2/5] pinctrl: samsung: Add GPF support for Exynos5433
@ 2016-11-03 6:39 ` Chanwoo Choi
0 siblings, 0 replies; 43+ messages in thread
From: Chanwoo Choi @ 2016-11-03 6:39 UTC (permalink / raw)
To: linux-arm-kernel
This patch add the support of GPF[1-5] pin of Exynos5433 SoC. The GPFx need
to support the multiple memory map because the registers of GPFx are located
in the different domain.
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-gpio at vger.kernel.org
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
drivers/pinctrl/samsung/pinctrl-exynos.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index d657b52dfdb5..12f7d1eb65bc 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -1339,6 +1339,11 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
+ EXYNOS_PIN_BANK_EINTW_EXT(8, 0x020, "gpf1", 0x1004, 1),
+ EXYNOS_PIN_BANK_EINTW_EXT(4, 0x040, "gpf2", 0x1008, 1),
+ EXYNOS_PIN_BANK_EINTW_EXT(4, 0x060, "gpf3", 0x100c, 1),
+ EXYNOS_PIN_BANK_EINTW_EXT(8, 0x080, "gpf4", 0x1010, 1),
+ EXYNOS_PIN_BANK_EINTW_EXT(8, 0x0a0, "gpf5", 0x1014, 1),
};
/* pin banks of exynos5433 pin-controller - AUD */
@@ -1420,6 +1425,7 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
+ .nr_ext_resources = 1,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos5433_pin_banks1,
--
1.9.1
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v3 3/5] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC
2016-11-03 6:39 ` Chanwoo Choi
@ 2016-11-03 6:39 ` Chanwoo Choi
-1 siblings, 0 replies; 43+ messages in thread
From: Chanwoo Choi @ 2016-11-03 6:39 UTC (permalink / raw)
To: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel
Cc: cw00.choi, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, andi.shyti,
chanwoo
This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on
Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports
PSCI (Power State Coordination Interface) v0.1.
This patch includes following Device Tree node to support Exynos5433 SoC:
1. Octa cores for big.LITTLE architecture
- Cortex-A53 LITTLE Quad-core
- Cortex-A57 big Quad-core
- Support PSCI v0.1
2. Clock controller node
- CMU_TOP : clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
- CMU_CPIF : clocks for LLI (Low Latency Interface)
- CMU_MIF : clocks for DRAM Memory Controller
- CMU_PERIC : clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS
- CMU_PERIS : clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC
- CMU_FSYS : clocks for USB/UFS/SDMMC/TSI/PDMA
- CMU_G2D : clocks for G2D/MDMA
- CMU_DISP : clocks for DECON/HDMI/DSIM/MIXER
- CMU_AUD : clocks for Cortex-A5/BUS/AUDIO
- CMU_BUS{0|1|2} : clocks for global data buses and global peripheral buses
- CMU_G3D : clocks for 3D Graphics Engine
- CMU_GSCL : clocks for GSCALER
- CMU_APOLLO: clocks for Cortex-A53 Quad-core processor.
- CMU_ATLAS : clocks for Cortex-A57 Quad-core processor,
CoreSight and L2 cache controller.
- CMU_MSCL : clocks for M2M (Memory to Memory) scaler and JPEG IPs.
- CMU_MFC : clocks for MFC (Multi-Format Codec) IP.
- CMU_HEVC : clocks for HEVC(High Efficiency Video Codec) decoder IP.
- CMU_ISP : clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs.
- CMU_CAM0 : clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs.
- CMU_CAM1 : clocks for COrtex-A5/MIPI_CSIS2/FIMC_LITE_C/FIMC-FD IPs.
3. pinctrl node for GPIO
- alive/aud/cpif/ese/finger/fsys/imem/nfc/peric/touch pad
4. Timer
- ARM architecture timer (armv8-timer)
- MCT (Multi Core Timer) timer
5. Interrupt controller (GIC-400)
6. BUS devices
- HS-I2C (High-Speed I2C) device
- SPI (Serial Peripheral Interface) device
7. Sound devices
- I2S bus
- LPASS (Low Power Audio Subsystem)
8. Power management devices
- CPUFREQ for for Cortex-A53/A57
- TMU (Thermal Management Unit) for Cortex-A53/A57, G3D, ISP
9. Display controller devices
- DECON (Display and enhancement controller) for panel output
- DSI (Display Serial Interface)
- MIC (Mobile Image Compressor)
10. USB
- USB 3.0 DRD (Dual Role Device) controller
- USB 3.0 Host controller
11. Storage devices
- MSHC (Mobile Storage Host Controller)
12. Misc devices
- UART device
- ADC (Analog Digital Converter)
- PWM (Pulse Width Modulation)
- ADMA (Advanced DMA) and PDMA (Peripheral DMA)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 794 ++++++++++++
.../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 23 +
.../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 296 +++++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1356 ++++++++++++++++++++
5 files changed, 2491 insertions(+)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
new file mode 100644
index 000000000000..796881310bf6
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -0,0 +1,794 @@
+/*
+ * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define PIN_PULL_NONE 0
+#define PIN_PULL_DOWN 1
+#define PIN_PULL_UP 3
+
+#define PIN_DRV_LV1 0
+#define PIN_DRV_LV2 2
+#define PIN_DRV_LV3 1
+#define PIN_DRV_LV4 3
+
+#define PIN_IN 0
+#define PIN_OUT 1
+#define PIN_FUNC1 2
+
+#define PIN(_func, _pin, _pull, _drv) \
+ _pin { \
+ samsung,pins = #_pin; \
+ samsung,pin-function = <PIN_ ##_func>; \
+ samsung,pin-pud = <PIN_PULL_ ##_pull>; \
+ samsung,pin-drv = <PIN_DRV_ ##_drv>; \
+ }
+
+&pinctrl_alive {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 0 0>, <GIC_SPI 1 0>, <GIC_SPI 2 0>,
+ <GIC_SPI 3 0>, <GIC_SPI 4 0>, <GIC_SPI 5 0>,
+ <GIC_SPI 6 0>, <GIC_SPI 7 0>;
+ #interrupt-cells = <2>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 8 0>, <GIC_SPI 9 0>, <GIC_SPI 10 0>,
+ <GIC_SPI 11 0>, <GIC_SPI 12 0>, <GIC_SPI 13 0>,
+ <GIC_SPI 14 0>, <GIC_SPI 15 0>;
+ #interrupt-cells = <2>;
+ };
+
+ gpa2: gpa2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa3: gpa3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf2: gpf2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf3: gpf3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf4: gpf4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf5: gpf5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_aud {
+ gpz0: gpz0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpz1: gpz1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2s0_bus: i2s0-bus {
+ samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
+ "gpz0-4", "gpz0-5", "gpz0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm0_bus: pcm0-bus {
+ samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart_aud_bus: uart-aud-bus {
+ samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_cpif {
+ gpv6: gpv6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_ese {
+ gpj2: gpj2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_finger {
+ gpd5: gpd5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ spi2_bus: spi2-bus {
+ samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c6_bus: hs-i2c6-bus {
+ samsung,pins = "gpd5-3", "gpd5-2";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_fsys {
+ gph1: gph1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpr4: gpr4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpr0: gpr0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpr1: gpr1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpr2: gpr2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpr3: gpr3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpr0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpr0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_rdqs: sd0-rdqs {
+ samsung,pins = "gpr0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_qrdy: sd0-qrdy {
+ samsung,pins = "gpr0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpr1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpr2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpr2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pins = "gpr3-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus8: sd1-bus-width8 {
+ samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ pcie_bus: pcie_bus {
+ samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpr4-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpr4-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpr4-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpr4-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_clk_output: sd2-clk-output {
+ samsung,pins = "gpr4-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <2>;
+ };
+
+ sd2_cmd_output: sd2-cmd-output {
+ samsung,pins = "gpr4-1";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <2>;
+ };
+};
+
+&pinctrl_imem {
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_nfc {
+ gpj0: gpj0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ hs_i2c4_bus: hs-i2c4-bus {
+ samsung,pins = "gpj0-1", "gpj0-0";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_peric {
+ gpv7: gpv7 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb0: gpb0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc2: gpc2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc3: gpc3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg0: gpg0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd0: gpd0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd1: gpd1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd2: gpd2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd4: gpd4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd8: gpd8 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd6: gpd6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd7: gpd7 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg1: gpg1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg2: gpg2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg3: gpg3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ hs_i2c8_bus: hs-i2c8-bus {
+ samsung,pins = "gpb0-1", "gpb0-0";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c9_bus: hs-i2c9-bus {
+ samsung,pins = "gpb0-3", "gpb0-2";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s1_bus: i2s1-bus {
+ samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
+ "gpd4-3", "gpd4-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm1_bus: pcm1-bus {
+ samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
+ "gpd4-3", "gpd4-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ spdif_bus: spdif-bus {
+ samsung,pins = "gpd4-3", "gpd4-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_spi_pin0: fimc-is-spi-pin0 {
+ samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_spi_pin1: fimc-is-spi-pin1 {
+ samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_bus: uart0-bus {
+ samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ };
+
+ hs_i2c2_bus: hs-i2c2-bus {
+ samsung,pins = "gpd0-3", "gpd0-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_bus: uart2-bus {
+ samsung,pins = "gpd1-5", "gpd1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ };
+
+ uart1_bus: uart1-bus {
+ samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ };
+
+ hs_i2c3_bus: hs-i2c3-bus {
+ samsung,pins = "gpd1-3", "gpd1-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c0_bus: hs-i2c0-bus {
+ samsung,pins = "gpd2-1", "gpd2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c1_bus: hs-i2c1-bus {
+ samsung,pins = "gpd2-3", "gpd2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpd2-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpd2-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm2_out: pwm2-out {
+ samsung,pins = "gpd2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm3_out: pwm3-out {
+ samsung,pins = "gpd2-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c7_bus: hs-i2c7-bus {
+ samsung,pins = "gpd2-7", "gpd2-6";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c10_bus: hs-i2c10-bus {
+ samsung,pins = "gpg3-1", "gpg3-0";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c11_bus: hs-i2c11-bus {
+ samsung,pins = "gpg3-3", "gpg3-2";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi3_bus: spi3-bus {
+ samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi4_bus: spi4-bus {
+ samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_uart: fimc-is-uart {
+ samsung,pins = "gpc1-1", "gpc0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_ch0_i2c: fimc-is-ch0_i2c {
+ samsung,pins = "gpc2-1", "gpc2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_ch0_mclk: fimc-is-ch0_mclk {
+ samsung,pins = "gpd7-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_ch1_i2c: fimc-is-ch1-i2c {
+ samsung,pins = "gpc2-3", "gpc2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_ch1_mclk: fimc-is-ch1-mclk {
+ samsung,pins = "gpd7-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_ch2_i2c: fimc-is-ch2-i2c {
+ samsung,pins = "gpc2-5", "gpc2-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_ch2_mclk: fimc-is-ch2-mclk {
+ samsung,pins = "gpd7-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_touch {
+ gpj1: gpj1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ hs_i2c5_bus: hs-i2c5-bus {
+ samsung,pins = "gpj1-1", "gpj1-0";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
new file mode 100644
index 000000000000..9be2978f1b9a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
@@ -0,0 +1,23 @@
+/*
+ * Device tree sources for Exynos5433 TMU sensor configuration
+ *
+ * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <23>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <75>;
+samsung,tmu_min_efuse_value = <40>;
+samsung,tmu_max_efuse_value = <150>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
+samsung,tmu_mux_addr = <6>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
new file mode 100644
index 000000000000..125fe58d77ce
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Device tree sources for Exynos5433 TMU sensor configuration
+ *
+ * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <75>;
+samsung,tmu_min_efuse_value = <40>;
+samsung,tmu_max_efuse_value = <150>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
new file mode 100644
index 000000000000..ceaa05145b8a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
@@ -0,0 +1,296 @@
+/*
+ * Device tree sources for Exynos5433 thermal zone
+ *
+ * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+thermal-zones {
+ atlas0_thermal: atlas0-thermal {
+ thermal-sensors = <&tmu_atlas0>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ atlas0_alert_0: atlas0-alert-0 {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_1: atlas0-alert-1 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_2: atlas0-alert-2 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_3: atlas0-alert-3 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_4: atlas0-alert-4 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_5: atlas0-alert-5 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_6: atlas0-alert-6 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ /* Set maximum frequency as 1800MHz */
+ trip = <&atlas0_alert_0>;
+ cooling-device = <&cpu4 1 2>;
+ };
+ map1 {
+ /* Set maximum frequency as 1700MHz */
+ trip = <&atlas0_alert_1>;
+ cooling-device = <&cpu4 2 3>;
+ };
+ map2 {
+ /* Set maximum frequency as 1600MHz */
+ trip = <&atlas0_alert_2>;
+ cooling-device = <&cpu4 3 4>;
+ };
+ map3 {
+ /* Set maximum frequency as 1500MHz */
+ trip = <&atlas0_alert_3>;
+ cooling-device = <&cpu4 4 5>;
+ };
+ map4 {
+ /* Set maximum frequency as 1400MHz */
+ trip = <&atlas0_alert_4>;
+ cooling-device = <&cpu4 5 7>;
+ };
+ map5 {
+ /* Set maximum frequencyas 1200MHz */
+ trip = <&atlas0_alert_5>;
+ cooling-device = <&cpu4 7 9>;
+ };
+ map6 {
+ /* Set maximum frequency as 1000MHz */
+ trip = <&atlas0_alert_6>;
+ cooling-device = <&cpu4 9 14>;
+ };
+ };
+ };
+
+ atlas1_thermal: atlas1-thermal {
+ thermal-sensors = <&tmu_atlas1>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ atlas1_alert_0: atlas1-alert-0 {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_1: atlas1-alert-1 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_2: atlas1-alert-2 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_3: atlas1-alert-3 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_4: atlas1-alert-4 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_5: atlas1-alert-5 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_6: atlas1-alert-6 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+
+ g3d_thermal: g3d-thermal {
+ thermal-sensors = <&tmu_g3d>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ g3d_alert_0: g3d-alert-0 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_1: g3d-alert-1 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_2: g3d-alert-2 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_3: g3d-alert-3 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_4: g3d-alert-4 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_5: g3d-alert-5 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_6: g3d-alert-6 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+
+ apollo_thermal: apollo-thermal {
+ thermal-sensors = <&tmu_apollo>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ apollo_alert_0: apollo-alert-0 {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_1: apollo-alert-1 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_2: apollo-alert-2 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_3: apollo-alert-3 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_4: apollo-alert-4 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_5: apollo-alert-5 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_6: apollo-alert-6 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ /* Set maximum frequency as 1200MHz */
+ trip = <&apollo_alert_2>;
+ cooling-device = <&cpu0 1 2>;
+ };
+ map1 {
+ /* Set maximum frequency as 1100MHz */
+ trip = <&apollo_alert_3>;
+ cooling-device = <&cpu0 2 3>;
+ };
+ map2 {
+ /* Set maximum frequency as 1000MHz */
+ trip = <&apollo_alert_4>;
+ cooling-device = <&cpu0 3 4>;
+ };
+ map3 {
+ /* Set maximum frequency as 900MHz */
+ trip = <&apollo_alert_5>;
+ cooling-device = <&cpu0 4 5>;
+ };
+ map4 {
+ /* Set maximum frequency as 800MHz */
+ trip = <&apollo_alert_6>;
+ cooling-device = <&cpu0 5 9>;
+ };
+ };
+ };
+
+ isp_thermal: isp-thermal {
+ thermal-sensors = <&tmu_isp>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ isp_alert_0: isp-alert-0 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_1: isp-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_2: isp-alert-2 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_3: isp-alert-3 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_4: isp-alert-4 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_5: isp-alert-5 {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_6: isp-alert-6 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
new file mode 100644
index 000000000000..1188630823a7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -0,0 +1,1356 @@
+/*
+ * Samsung's Exynos5433 SoC device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's Exynos5433 SoC device nodes are listed in this file.
+ * Exynos5433 based board files can include this file and provide
+ * values for board specific bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos5433 SoC. As device tree coverage for Exynos5433 increases,
+ * additional nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos5433.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "samsung,exynos5433";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x100>;
+ clock-frequency = <1300000000>;
+ clocks = <&cmu_apollo CLK_SCLK_APOLLO>;
+ clock-names = "apolloclk";
+ operating-points-v2 = <&cluster_a53_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x101>;
+ clock-frequency = <1300000000>;
+ operating-points-v2 = <&cluster_a53_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu2: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x102>;
+ clock-frequency = <1300000000>;
+ operating-points-v2 = <&cluster_a53_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu3: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x103>;
+ clock-frequency = <1300000000>;
+ operating-points-v2 = <&cluster_a53_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu4: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x0>;
+ clock-frequency = <1900000000>;
+ clocks = <&cmu_atlas CLK_SCLK_ATLAS>;
+ clock-names = "atlasclk";
+ operating-points-v2 = <&cluster_a57_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu5: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x1>;
+ clock-frequency = <1900000000>;
+ operating-points-v2 = <&cluster_a57_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu6: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x2>;
+ clock-frequency = <1900000000>;
+ operating-points-v2 = <&cluster_a57_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu7: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x3>;
+ clock-frequency = <1900000000>;
+ operating-points-v2 = <&cluster_a57_opp_table>;
+ #cooling-cells = <2>;
+ };
+ };
+
+ cluster_a53_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <900000>;
+ };
+ opp@500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <925000>;
+ };
+ opp@600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <950000>;
+ };
+ opp@700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <975000>;
+ };
+ opp@800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp@900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1050000>;
+ };
+ opp@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1075000>;
+ };
+ opp@1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1112500>;
+ };
+ opp@1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1112500>;
+ };
+ opp@1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1150000>;
+ };
+ };
+
+ cluster_a57_opp_table: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <900000>;
+ };
+ opp@600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <900000>;
+ };
+ opp@700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <912500>;
+ };
+ opp@800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <912500>;
+ };
+ opp@900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <937500>;
+ };
+ opp@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <975000>;
+ };
+ opp@1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1012500>;
+ };
+ opp@1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1037500>;
+ };
+ opp@1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1062500>;
+ };
+ opp@1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1087500>;
+ };
+ opp@1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1125000>;
+ };
+ opp@1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <1137500>;
+ };
+ opp@1700000000 {
+ opp-hz = /bits/ 64 <1700000000>;
+ opp-microvolt = <1175000>;
+ };
+ opp@1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1212500>;
+ };
+ opp@1900000000 {
+ opp-hz = /bits/ 64 <1900000000>;
+ opp-microvolt = <1262500>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_off = <0x84000002>;
+ cpu_on = <0xC4000003>;
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x18000000>;
+
+ chipid@10000000 {
+ compatible = "samsung,exynos4210-chipid";
+ reg = <0x10000000 0x100>;
+ };
+
+ xxti: xxti {
+ compatible = "fixed-clock";
+ clock-output-names = "oscclk";
+ #clock-cells = <0>;
+ };
+
+ cmu_top: clock-controller@10030000 {
+ compatible = "samsung,exynos5433-cmu-top";
+ reg = <0x10030000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_mphy_pll",
+ "sclk_mfc_pll",
+ "sclk_bus_pll";
+ clocks = <&xxti>,
+ <&cmu_cpif CLK_SCLK_MPHY_PLL>,
+ <&cmu_mif CLK_SCLK_MFC_PLL>,
+ <&cmu_mif CLK_SCLK_BUS_PLL>;
+ };
+
+ cmu_cpif: clock-controller@10fc0000 {
+ compatible = "samsung,exynos5433-cmu-cpif";
+ reg = <0x10fc0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk";
+ clocks = <&xxti>;
+ };
+
+ cmu_mif: clock-controller@105b0000 {
+ compatible = "samsung,exynos5433-cmu-mif";
+ reg = <0x105b0000 0x2000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_mphy_pll";
+ clocks = <&xxti>,
+ <&cmu_cpif CLK_SCLK_MPHY_PLL>;
+ };
+
+ cmu_peric: clock-controller@14c80000 {
+ compatible = "samsung,exynos5433-cmu-peric";
+ reg = <0x14c80000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_peris: clock-controller@0x10040000 {
+ compatible = "samsung,exynos5433-cmu-peris";
+ reg = <0x10040000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_fsys: clock-controller@156e0000 {
+ compatible = "samsung,exynos5433-cmu-fsys";
+ reg = <0x156e0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_ufs_mphy",
+ "div_aclk_fsys_200",
+ "sclk_pcie_100_fsys",
+ "sclk_ufsunipro_fsys",
+ "sclk_mmc2_fsys",
+ "sclk_mmc1_fsys",
+ "sclk_mmc0_fsys",
+ "sclk_usbhost30_fsys",
+ "sclk_usbdrd30_fsys";
+ clocks = <&xxti>,
+ <&cmu_cpif CLK_SCLK_UFS_MPHY>,
+ <&cmu_top CLK_DIV_ACLK_FSYS_200>,
+ <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
+ <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
+ <&cmu_top CLK_SCLK_MMC2_FSYS>,
+ <&cmu_top CLK_SCLK_MMC1_FSYS>,
+ <&cmu_top CLK_SCLK_MMC0_FSYS>,
+ <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+ <&cmu_top CLK_SCLK_USBDRD30_FSYS>;
+ };
+
+ cmu_g2d: clock-controller@12460000 {
+ compatible = "samsung,exynos5433-cmu-g2d";
+ reg = <0x12460000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_g2d_266",
+ "aclk_g2d_400";
+ clocks = <&xxti>,
+ <&cmu_top CLK_ACLK_G2D_266>,
+ <&cmu_top CLK_ACLK_G2D_400>;
+ };
+
+ cmu_disp: clock-controller@13b90000 {
+ compatible = "samsung,exynos5433-cmu-disp";
+ reg = <0x13b90000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_dsim1_disp",
+ "sclk_dsim0_disp",
+ "sclk_dsd_disp",
+ "sclk_decon_tv_eclk_disp",
+ "sclk_decon_vclk_disp",
+ "sclk_decon_eclk_disp",
+ "sclk_decon_tv_vclk_disp",
+ "aclk_disp_333";
+ clocks = <&xxti>,
+ <&cmu_mif CLK_SCLK_DSIM1_DISP>,
+ <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+ <&cmu_mif CLK_SCLK_DSD_DISP>,
+ <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+ <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
+ <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+ <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
+ <&cmu_mif CLK_ACLK_DISP_333>;
+ };
+
+ cmu_aud: clock-controller@114c0000 {
+ compatible = "samsung,exynos5433-cmu-aud";
+ reg = <0x114c0000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_bus0: clock-controller@13600000 {
+ compatible = "samsung,exynos5433-cmu-bus0";
+ reg = <0x13600000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "aclk_bus0_400";
+ clocks = <&cmu_top CLK_ACLK_BUS0_400>;
+ };
+
+ cmu_bus1: clock-controller@14800000 {
+ compatible = "samsung,exynos5433-cmu-bus1";
+ reg = <0x14800000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "aclk_bus1_400";
+ clocks = <&cmu_top CLK_ACLK_BUS1_400>;
+ };
+
+ cmu_bus2: clock-controller@13400000 {
+ compatible = "samsung,exynos5433-cmu-bus2";
+ reg = <0x13400000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "aclk_bus2_400";
+ clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
+ };
+
+ cmu_g3d: clock-controller@14aa0000 {
+ compatible = "samsung,exynos5433-cmu-g3d";
+ reg = <0x14aa0000 0x2000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "aclk_g3d_400";
+ clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
+ };
+
+ cmu_gscl: clock-controller@13cf0000 {
+ compatible = "samsung,exynos5433-cmu-gscl";
+ reg = <0x13cf0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_gscl_111",
+ "aclk_gscl_333";
+ clocks = <&xxti>,
+ <&cmu_top CLK_ACLK_GSCL_111>,
+ <&cmu_top CLK_ACLK_GSCL_333>;
+ };
+
+ cmu_apollo: clock-controller@11900000 {
+ compatible = "samsung,exynos5433-cmu-apollo";
+ reg = <0x11900000 0x2000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "sclk_bus_pll_apollo";
+ clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
+ };
+
+ cmu_atlas: clock-controller@11800000 {
+ compatible = "samsung,exynos5433-cmu-atlas";
+ reg = <0x11800000 0x2000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "sclk_bus_pll_atlas";
+ clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
+ };
+
+ cmu_mscl: clock-controller@105d0000 {
+ compatible = "samsung,exynos5433-cmu-mscl";
+ reg = <0x150d0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_jpeg_mscl",
+ "aclk_mscl_400";
+ clocks = <&xxti>,
+ <&cmu_top CLK_SCLK_JPEG_MSCL>,
+ <&cmu_top CLK_ACLK_MSCL_400>;
+ };
+
+ cmu_mfc: clock-controller@15280000 {
+ compatible = "samsung,exynos5433-cmu-mfc";
+ reg = <0x15280000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "aclk_mfc_400";
+ clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
+ };
+
+ cmu_hevc: clock-controller@14f80000 {
+ compatible = "samsung,exynos5433-cmu-hevc";
+ reg = <0x14f80000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "aclk_hevc_400";
+ clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
+ };
+
+ cmu_isp: clock-controller@146d0000 {
+ compatible = "samsung,exynos5433-cmu-isp";
+ reg = <0x146d0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_isp_dis_400",
+ "aclk_isp_400";
+ clocks = <&xxti>,
+ <&cmu_top CLK_ACLK_ISP_DIS_400>,
+ <&cmu_top CLK_ACLK_ISP_400>;
+ };
+
+ cmu_cam0: clock-controller@120d0000 {
+ compatible = "samsung,exynos5433-cmu-cam0";
+ reg = <0x120d0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_cam0_333",
+ "aclk_cam0_400",
+ "aclk_cam0_552";
+ clocks = <&xxti>,
+ <&cmu_top CLK_ACLK_CAM0_333>,
+ <&cmu_top CLK_ACLK_CAM0_400>,
+ <&cmu_top CLK_ACLK_CAM0_552>;
+ };
+
+ cmu_cam1: clock-controller@145d0000 {
+ compatible = "samsung,exynos5433-cmu-cam1";
+ reg = <0x145d0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_isp_uart_cam1",
+ "sclk_isp_spi1_cam1",
+ "sclk_isp_spi0_cam1",
+ "aclk_cam1_333",
+ "aclk_cam1_400",
+ "aclk_cam1_552";
+ clocks = <&xxti>,
+ <&cmu_top CLK_SCLK_ISP_UART_CAM1>,
+ <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
+ <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
+ <&cmu_top CLK_ACLK_CAM1_333>,
+ <&cmu_top CLK_ACLK_CAM1_400>,
+ <&cmu_top CLK_ACLK_CAM1_552>;
+ };
+
+ tmu_atlas0: tmu@10060000 {
+ compatible = "samsung,exynos5433-tmu";
+ reg = <0x10060000 0x200>;
+ interrupts = <GIC_SPI 95 0>;
+ clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+ <&cmu_peris CLK_SCLK_TMU0>;
+ clock-names = "tmu_apbif", "tmu_sclk";
+ #include "exynos5433-tmu-sensor-conf.dtsi"
+ status = "disabled";
+ };
+
+ tmu_atlas1: tmu@10068000 {
+ compatible = "samsung,exynos5433-tmu";
+ reg = <0x10068000 0x200>;
+ interrupts = <GIC_SPI 96 0>;
+ clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+ <&cmu_peris CLK_SCLK_TMU0>;
+ clock-names = "tmu_apbif", "tmu_sclk";
+ #include "exynos5433-tmu-sensor-conf.dtsi"
+ status = "disabled";
+ };
+
+ tmu_g3d: tmu@10070000 {
+ compatible = "samsung,exynos5433-tmu";
+ reg = <0x10070000 0x200>;
+ interrupts = <GIC_SPI 99 0>;
+ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+ <&cmu_peris CLK_SCLK_TMU1>;
+ clock-names = "tmu_apbif", "tmu_sclk";
+ #include "exynos5433-tmu-g3d-sensor-conf.dtsi"
+ status = "disabled";
+ };
+
+ tmu_apollo: tmu@10078000 {
+ compatible = "samsung,exynos5433-tmu";
+ reg = <0x10078000 0x200>;
+ interrupts = <GIC_SPI 115 0>;
+ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+ <&cmu_peris CLK_SCLK_TMU1>;
+ clock-names = "tmu_apbif", "tmu_sclk";
+ #include "exynos5433-tmu-sensor-conf.dtsi"
+ status = "disabled";
+ };
+
+ tmu_isp: tmu@1007c000 {
+ compatible = "samsung,exynos5433-tmu";
+ reg = <0x1007c000 0x200>;
+ interrupts = <GIC_SPI 94 0>;
+ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+ <&cmu_peris CLK_SCLK_TMU1>;
+ clock-names = "tmu_apbif", "tmu_sclk";
+ #include "exynos5433-tmu-sensor-conf.dtsi"
+ status = "disabled";
+ };
+
+ mct@101c0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101c0000 0x800>;
+ interrupts = <GIC_SPI 102 0>, <GIC_SPI 103 0>,
+ <GIC_SPI 104 0>, <GIC_SPI 105 0>,
+ <GIC_SPI 106 0>, <GIC_SPI 107 0>,
+ <GIC_SPI 108 0>, <GIC_SPI 109 0>,
+ <GIC_SPI 110 0>, <GIC_SPI 111 0>,
+ <GIC_SPI 112 0>, <GIC_SPI 113 0>;
+ clocks = <&xxti>, <&cmu_peris CLK_PCLK_MCT>;
+ clock-names = "fin_pll", "mct";
+ };
+
+ pinctrl_alive: pinctrl@10580000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos7-wakeup-eint";
+ interrupts = <GIC_SPI 16 0>;
+ };
+ };
+
+ pinctrl_aud: pinctrl@114b0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x114b0000 0x1000>;
+ interrupts = <GIC_SPI 68 0>;
+ };
+
+ pinctrl_cpif: pinctrl@10fe0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x10fe0000 0x1000>;
+ interrupts = <GIC_SPI 179 0>;
+ };
+
+ pinctrl_ese: pinctrl@14ca0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x14ca0000 0x1000>;
+ interrupts = <GIC_SPI 413 0>;
+ };
+
+ pinctrl_finger: pinctrl@14cb0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x14cb0000 0x1000>;
+ interrupts = <GIC_SPI 414 0>;
+ };
+
+ pinctrl_fsys: pinctrl@15690000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x15690000 0x1000>;
+ interrupts = <GIC_SPI 229 0>;
+ };
+
+ pinctrl_imem: pinctrl@11090000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x11090000 0x1000>;
+ interrupts = <GIC_SPI 325 0>;
+ };
+
+ pinctrl_nfc: pinctrl@14cd0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x14cd0000 0x1000>;
+ interrupts = <GIC_SPI 441 0>;
+ };
+
+ pinctrl_peric: pinctrl@14cc0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x14cc0000 0x1100>;
+ interrupts = <GIC_SPI 440 0>;
+ };
+
+ pinctrl_touch: pinctrl@14ce0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x14ce0000 0x1100>;
+ interrupts = <GIC_SPI 442 0>;
+ };
+
+ pmu_system_controller: system-controller@105c0000 {
+ compatible = "samsung,exynos5433-pmu", "syscon";
+ reg = <0x105c0000 0x5008>;
+ #clock-cells = <1>;
+ clock-names = "clkout16";
+ clocks = <&xxti>;
+ };
+
+ gic: interrupt-controller@11001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x11001000 0x1000>,
+ <0x11002000 0x2000>,
+ <0x11004000 0x2000>,
+ <0x11006000 0x2000>;
+ interrupts = <GIC_PPI 9 0xf04>;
+ };
+
+ mipi_phy: video-phy@105c0710 {
+ compatible = "samsung,exynos5433-mipi-video-phy";
+ #phy-cells = <1>;
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ samsung,cam0-sysreg = <&syscon_cam0>;
+ samsung,cam1-sysreg = <&syscon_cam1>;
+ samsung,disp-sysreg = <&syscon_disp>;
+ };
+
+ decon: decon@13800000 {
+ compatible = "samsung,exynos5433-decon";
+ reg = <0x13800000 0x2104>;
+ clocks = <&cmu_disp CLK_PCLK_DECON>,
+ <&cmu_disp CLK_ACLK_DECON>,
+ <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+ <&cmu_disp CLK_ACLK_XIU_DECON0X>,
+ <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+ <&cmu_disp CLK_SCLK_DECON_VCLK>,
+ <&cmu_disp CLK_SCLK_DECON_ECLK>;
+ clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
+ "aclk_xiu_decon0x", "pclk_smmu_decon0x",
+ "sclk_decon_vclk", "sclk_decon_eclk";
+ interrupt-names = "fifo", "vsync", "lcd_sys";
+ interrupts = <GIC_SPI 201 0>, <GIC_SPI 202 0>,
+ <GIC_SPI 203 0>;
+ samsung,disp-sysreg = <&syscon_disp>;
+ status = "disabled";
+ iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
+ iommu-names = "m0", "m1";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ decon_to_mic: endpoint {
+ remote-endpoint =
+ <&mic_to_decon>;
+ };
+ };
+ };
+ };
+
+ dsi: dsi@13900000 {
+ compatible = "samsung,exynos5433-mipi-dsi";
+ reg = <0x13900000 0xC0>;
+ interrupts = <GIC_SPI 205 0>;
+ phys = <&mipi_phy 1>;
+ phy-names = "dsim";
+ clocks = <&cmu_disp CLK_PCLK_DSIM0>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+ <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+ <&cmu_disp CLK_SCLK_DSIM0>;
+ clock-names = "bus_clk",
+ "phyclk_mipidphy0_bitclkdiv8",
+ "phyclk_mipidphy0_rxclkesc0",
+ "sclk_rgb_vclk_to_dsim0",
+ "sclk_mipi";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_to_mic: endpoint {
+ remote-endpoint = <&mic_to_dsi>;
+ };
+ };
+ };
+ };
+
+ mic: mic@13930000 {
+ compatible = "samsung,exynos5433-mic";
+ reg = <0x13930000 0x48>;
+ clocks = <&cmu_disp CLK_PCLK_MIC0>,
+ <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+ clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
+ samsung,disp-syscon = <&syscon_disp>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mic_to_decon: endpoint {
+ remote-endpoint =
+ <&decon_to_mic>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mic_to_dsi: endpoint {
+ remote-endpoint = <&dsi_to_mic>;
+ };
+ };
+ };
+ };
+
+ syscon_disp: syscon@13b80000 {
+ compatible = "syscon";
+ reg = <0x13b80000 0x1010>;
+ };
+
+ syscon_cam0: syscon@120f0000 {
+ compatible = "syscon";
+ reg = <0x120f0000 0x1020>;
+ };
+
+ syscon_cam1: syscon@145f0000 {
+ compatible = "syscon";
+ reg = <0x145f0000 0x1038>;
+ };
+
+ sysmmu_decon0x: sysmmu@0x13a00000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13a00000 0x1000>;
+ interrupts = <GIC_SPI 192 0>;
+ clock-names = "pclk", "aclk";
+ clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+ <&cmu_disp CLK_ACLK_SMMU_DECON0X>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_decon1x: sysmmu@0x13a10000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13a10000 0x1000>;
+ interrupts = <GIC_SPI 194 0>;
+ clock-names = "pclk", "aclk";
+ clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
+ <&cmu_disp CLK_ACLK_SMMU_DECON1X>;
+ #iommu-cells = <0>;
+ };
+
+ serial_0: serial@14c10000 {
+ compatible = "samsung,exynos5433-uart";
+ reg = <0x14c10000 0x100>;
+ interrupts = <GIC_SPI 421 0>;
+ clocks = <&cmu_peric CLK_PCLK_UART0>,
+ <&cmu_peric CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_bus>;
+ status = "disabled";
+ };
+
+ serial_1: serial@14c20000 {
+ compatible = "samsung,exynos5433-uart";
+ reg = <0x14c20000 0x100>;
+ interrupts = <GIC_SPI 422 0>;
+ clocks = <&cmu_peric CLK_PCLK_UART1>,
+ <&cmu_peric CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_bus>;
+ status = "disabled";
+ };
+
+ serial_2: serial@14c30000 {
+ compatible = "samsung,exynos5433-uart";
+ reg = <0x14c30000 0x100>;
+ interrupts = <GIC_SPI 423 0>;
+ clocks = <&cmu_peric CLK_PCLK_UART2>,
+ <&cmu_peric CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_bus>;
+ status = "disabled";
+ };
+
+ spi_0: spi@14d20000 {
+ compatible = "samsung,exynos5433-spi";
+ reg = <0x14d20000 0x100>;
+ interrupts = <GIC_SPI 432 0>;
+ dmas = <&pdma0 9>, <&pdma0 8>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric CLK_PCLK_SPI0>,
+ <&cmu_peric CLK_SCLK_SPI0>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI0>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
+ num-cs = <1>;
+ status = "disabled";
+ };
+
+ spi_1: spi@14d30000 {
+ compatible = "samsung,exynos5433-spi";
+ reg = <0x14d30000 0x100>;
+ interrupts = <GIC_SPI 433 0>;
+ dmas = <&pdma0 11>, <&pdma0 10>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric CLK_PCLK_SPI1>,
+ <&cmu_peric CLK_SCLK_SPI1>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI1>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
+ num-cs = <1>;
+ status = "disabled";
+ };
+
+ spi_2: spi@14d40000 {
+ compatible = "samsung,exynos5433-spi";
+ reg = <0x14d40000 0x100>;
+ interrupts = <GIC_SPI 434 0>;
+ dmas = <&pdma0 13>, <&pdma0 12>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric CLK_PCLK_SPI2>,
+ <&cmu_peric CLK_SCLK_SPI2>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI2>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_bus>;
+ num-cs = <1>;
+ status = "disabled";
+ };
+
+ spi_3: spi@14d50000 {
+ compatible = "samsung,exynos5433-spi";
+ reg = <0x14d50000 0x100>;
+ interrupts = <GIC_SPI 447 0>;
+ dmas = <&pdma0 23>, <&pdma0 22>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric CLK_PCLK_SPI3>,
+ <&cmu_peric CLK_SCLK_SPI3>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI3>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_bus>;
+ num-cs = <1>;
+ status = "disabled";
+ };
+
+ spi_4: spi@14d00000 {
+ compatible = "samsung,exynos5433-spi";
+ reg = <0x14d00000 0x100>;
+ interrupts = <GIC_SPI 412 0>;
+ dmas = <&pdma0 25>, <&pdma0 24>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric CLK_PCLK_SPI4>,
+ <&cmu_peric CLK_SCLK_SPI4>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI4>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_bus>;
+ num-cs = <1>;
+ status = "disabled";
+ };
+
+ adc: adc@14d10000 {
+ compatible = "samsung,exynos7-adc";
+ reg = <0x14d10000 0x100>;
+ interrupts = <GIC_SPI 438 0>;
+ clock-names = "adc";
+ clocks = <&cmu_peric CLK_PCLK_ADCIF>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+ status = "disabled";
+ };
+
+ pwm: pwm@14dd0000 {
+ compatible = "samsung,exynos4210-pwm";
+ reg = <0x14dd0000 0x100>;
+ interrupts = <GIC_SPI 416 0>, <GIC_SPI 417 0>,
+ <GIC_SPI 418 0>, <GIC_SPI 419 0>,
+ <GIC_SPI 420 0>;
+ samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+ clocks = <&cmu_peric CLK_PCLK_PWM>;
+ clock-names = "timers";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ hsi2c_0: hsi2c@14e40000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14e40000 0x1000>;
+ interrupts = <GIC_SPI 428 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c0_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C0>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_1: hsi2c@14e50000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14e50000 0x1000>;
+ interrupts = <GIC_SPI 429 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c1_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C1>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_2: hsi2c@14e60000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14e60000 0x1000>;
+ interrupts = <GIC_SPI 430 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c2_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C2>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_3: hsi2c@14e70000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14e70000 0x1000>;
+ interrupts = <GIC_SPI 431 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c3_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C3>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_4: hsi2c@14ec0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14ec0000 0x1000>;
+ interrupts = <GIC_SPI 424 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c4_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C4>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_5: hsi2c@14ed0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14ed0000 0x1000>;
+ interrupts = <GIC_SPI 425 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c5_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C5>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_6: hsi2c@14ee0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14ee0000 0x1000>;
+ interrupts = <GIC_SPI 426 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c6_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C6>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_7: hsi2c@14ef0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14ef0000 0x1000>;
+ interrupts = <GIC_SPI 427 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c7_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C7>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_8: hsi2c@14d90000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14d90000 0x1000>;
+ interrupts = <GIC_SPI 443 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c8_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C8>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_9: hsi2c@14da0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14da0000 0x1000>;
+ interrupts = <GIC_SPI 444 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c9_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C9>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_10: hsi2c@14de0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14de0000 0x1000>;
+ interrupts = <GIC_SPI 445 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c10_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C10>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_11: hsi2c@14df0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14df0000 0x1000>;
+ interrupts = <GIC_SPI 446 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c11_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C11>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ usbdrd30: usb@15400000 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
+ <&cmu_fsys CLK_SCLK_USBDRD30>;
+ clock-names = "usbdrd30", "usbdrd30_susp_clk";
+ assigned-clocks =
+ <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
+ <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
+ <&cmu_top CLK_DIV_SCLK_USBDRD30>;
+ assigned-clock-parents =
+ <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
+ <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+ assigned-clock-rates = <0>, <0>, <66700000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ dwc3@15400000 {
+ compatible = "snps,dwc3";
+ reg = <0x15400000 0x10000>;
+ interrupts = <GIC_SPI 231 0>;
+ phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usbdrd30_phy: phy@15500000 {
+ compatible = "samsung,exynos5433-usbdrd-phy";
+ reg = <0x15500000 0x100>;
+ clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>,
+ <&cmu_fsys CLK_SCLK_USBDRD30>;
+ clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
+ "itp";
+ assigned-clocks =
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>;
+ assigned-clock-parents =
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>;
+ #phy-cells = <1>;
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ status = "disabled";
+ };
+
+ usbhost30_phy: phy@15580000 {
+ compatible = "samsung,exynos5433-usbdrd-phy";
+ reg = <0x15580000 0x100>;
+ clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>,
+ <&cmu_fsys CLK_SCLK_USBHOST30>;
+ clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
+ "itp";
+ assigned-clocks =
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>;
+ assigned-clock-parents =
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
+ #phy-cells = <1>;
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ status = "disabled";
+ };
+
+ usbhost30: usb@15a00000 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
+ <&cmu_fsys CLK_SCLK_USBHOST30>;
+ clock-names = "usbdrd30", "usbdrd30_susp_clk";
+ assigned-clocks =
+ <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
+ <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
+ <&cmu_top CLK_DIV_SCLK_USBHOST30>;
+ assigned-clock-parents =
+ <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+ <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+ assigned-clock-rates = <0>, <0>, <66700000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ usbdrd_dwc3_0: dwc3@15a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x15a00000 0x10000>;
+ interrupts = <GIC_SPI 244 0>;
+ phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ mshc_0: mshc@15540000 {
+ compatible = "samsung,exynos7-dw-mshc-smu";
+ interrupts = <GIC_SPI 225 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x15540000 0x2000>;
+ clocks = <&cmu_fsys CLK_ACLK_MMC0>,
+ <&cmu_fsys CLK_SCLK_MMC0>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ mshc_1: mshc@15550000 {
+ compatible = "samsung,exynos7-dw-mshc-smu";
+ interrupts = <GIC_SPI 226 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x15550000 0x2000>;
+ clocks = <&cmu_fsys CLK_ACLK_MMC1>,
+ <&cmu_fsys CLK_SCLK_MMC1>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ mshc_2: mshc@15560000 {
+ compatible = "samsung,exynos7-dw-mshc-smu";
+ interrupts = <GIC_SPI 227 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x15560000 0x2000>;
+ clocks = <&cmu_fsys CLK_ACLK_MMC2>,
+ <&cmu_fsys CLK_SCLK_MMC2>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma0: pdma@15610000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x15610000 0x1000>;
+ interrupts = <GIC_SPI 228 0>;
+ clocks = <&cmu_fsys CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma@15600000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x15600000 0x1000>;
+ interrupts = <GIC_SPI 246 0>;
+ clocks = <&cmu_fsys CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+ };
+
+ audio-subsystem@11400000 {
+ compatible = "samsung,exynos5433-lpass";
+ reg = <0x11400000 0x100>, <0x11500000 0x08>;
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ adma: adma@11420000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x11420000 0x1000>;
+ interrupts = <GIC_SPI 73 0>;
+ clocks = <&cmu_aud CLK_ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ i2s0: i2s0@11440000 {
+ compatible = "samsung,exynos7-i2s";
+ reg = <0x11440000 0x100>;
+ dmas = <&adma 0 &adma 2>;
+ dma-names = "tx", "rx";
+ interrupts = <GIC_SPI 70 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
+ <&cmu_aud CLK_SCLK_AUD_I2S>,
+ <&cmu_aud CLK_SCLK_I2S_BCLK>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ status = "disabled";
+ };
+
+ serial_3: serial@11460000 {
+ compatible = "samsung,exynos5433-uart";
+ reg = <0x11460000 0x100>;
+ interrupts = <GIC_SPI 67 0>;
+ clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
+ <&cmu_aud CLK_SCLK_AUD_UART>;
+ clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart_aud_bus>;
+ status = "disabled";
+ };
+ };
+ };
+
+ timer: timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+};
+
+#include "exynos5433-pinctrl.dtsi"
+#include "exynos5433-tmu.dtsi"
--
1.9.1
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v3 3/5] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC
@ 2016-11-03 6:39 ` Chanwoo Choi
0 siblings, 0 replies; 43+ messages in thread
From: Chanwoo Choi @ 2016-11-03 6:39 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on
Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports
PSCI (Power State Coordination Interface) v0.1.
This patch includes following Device Tree node to support Exynos5433 SoC:
1. Octa cores for big.LITTLE architecture
- Cortex-A53 LITTLE Quad-core
- Cortex-A57 big Quad-core
- Support PSCI v0.1
2. Clock controller node
- CMU_TOP : clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
- CMU_CPIF : clocks for LLI (Low Latency Interface)
- CMU_MIF : clocks for DRAM Memory Controller
- CMU_PERIC : clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS
- CMU_PERIS : clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC
- CMU_FSYS : clocks for USB/UFS/SDMMC/TSI/PDMA
- CMU_G2D : clocks for G2D/MDMA
- CMU_DISP : clocks for DECON/HDMI/DSIM/MIXER
- CMU_AUD : clocks for Cortex-A5/BUS/AUDIO
- CMU_BUS{0|1|2} : clocks for global data buses and global peripheral buses
- CMU_G3D : clocks for 3D Graphics Engine
- CMU_GSCL : clocks for GSCALER
- CMU_APOLLO: clocks for Cortex-A53 Quad-core processor.
- CMU_ATLAS : clocks for Cortex-A57 Quad-core processor,
CoreSight and L2 cache controller.
- CMU_MSCL : clocks for M2M (Memory to Memory) scaler and JPEG IPs.
- CMU_MFC : clocks for MFC (Multi-Format Codec) IP.
- CMU_HEVC : clocks for HEVC(High Efficiency Video Codec) decoder IP.
- CMU_ISP : clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs.
- CMU_CAM0 : clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs.
- CMU_CAM1 : clocks for COrtex-A5/MIPI_CSIS2/FIMC_LITE_C/FIMC-FD IPs.
3. pinctrl node for GPIO
- alive/aud/cpif/ese/finger/fsys/imem/nfc/peric/touch pad
4. Timer
- ARM architecture timer (armv8-timer)
- MCT (Multi Core Timer) timer
5. Interrupt controller (GIC-400)
6. BUS devices
- HS-I2C (High-Speed I2C) device
- SPI (Serial Peripheral Interface) device
7. Sound devices
- I2S bus
- LPASS (Low Power Audio Subsystem)
8. Power management devices
- CPUFREQ for for Cortex-A53/A57
- TMU (Thermal Management Unit) for Cortex-A53/A57, G3D, ISP
9. Display controller devices
- DECON (Display and enhancement controller) for panel output
- DSI (Display Serial Interface)
- MIC (Mobile Image Compressor)
10. USB
- USB 3.0 DRD (Dual Role Device) controller
- USB 3.0 Host controller
11. Storage devices
- MSHC (Mobile Storage Host Controller)
12. Misc devices
- UART device
- ADC (Analog Digital Converter)
- PWM (Pulse Width Modulation)
- ADMA (Advanced DMA) and PDMA (Peripheral DMA)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 794 ++++++++++++
.../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 23 +
.../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 296 +++++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1356 ++++++++++++++++++++
5 files changed, 2491 insertions(+)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
new file mode 100644
index 000000000000..796881310bf6
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -0,0 +1,794 @@
+/*
+ * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define PIN_PULL_NONE 0
+#define PIN_PULL_DOWN 1
+#define PIN_PULL_UP 3
+
+#define PIN_DRV_LV1 0
+#define PIN_DRV_LV2 2
+#define PIN_DRV_LV3 1
+#define PIN_DRV_LV4 3
+
+#define PIN_IN 0
+#define PIN_OUT 1
+#define PIN_FUNC1 2
+
+#define PIN(_func, _pin, _pull, _drv) \
+ _pin { \
+ samsung,pins = #_pin; \
+ samsung,pin-function = <PIN_ ##_func>; \
+ samsung,pin-pud = <PIN_PULL_ ##_pull>; \
+ samsung,pin-drv = <PIN_DRV_ ##_drv>; \
+ }
+
+&pinctrl_alive {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 0 0>, <GIC_SPI 1 0>, <GIC_SPI 2 0>,
+ <GIC_SPI 3 0>, <GIC_SPI 4 0>, <GIC_SPI 5 0>,
+ <GIC_SPI 6 0>, <GIC_SPI 7 0>;
+ #interrupt-cells = <2>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 8 0>, <GIC_SPI 9 0>, <GIC_SPI 10 0>,
+ <GIC_SPI 11 0>, <GIC_SPI 12 0>, <GIC_SPI 13 0>,
+ <GIC_SPI 14 0>, <GIC_SPI 15 0>;
+ #interrupt-cells = <2>;
+ };
+
+ gpa2: gpa2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa3: gpa3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf2: gpf2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf3: gpf3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf4: gpf4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf5: gpf5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_aud {
+ gpz0: gpz0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpz1: gpz1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2s0_bus: i2s0-bus {
+ samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
+ "gpz0-4", "gpz0-5", "gpz0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm0_bus: pcm0-bus {
+ samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart_aud_bus: uart-aud-bus {
+ samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_cpif {
+ gpv6: gpv6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_ese {
+ gpj2: gpj2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_finger {
+ gpd5: gpd5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ spi2_bus: spi2-bus {
+ samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c6_bus: hs-i2c6-bus {
+ samsung,pins = "gpd5-3", "gpd5-2";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_fsys {
+ gph1: gph1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpr4: gpr4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpr0: gpr0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpr1: gpr1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpr2: gpr2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpr3: gpr3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpr0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpr0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_rdqs: sd0-rdqs {
+ samsung,pins = "gpr0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_qrdy: sd0-qrdy {
+ samsung,pins = "gpr0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpr1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpr2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpr2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pins = "gpr3-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus8: sd1-bus-width8 {
+ samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ pcie_bus: pcie_bus {
+ samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpr4-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpr4-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpr4-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpr4-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_clk_output: sd2-clk-output {
+ samsung,pins = "gpr4-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <2>;
+ };
+
+ sd2_cmd_output: sd2-cmd-output {
+ samsung,pins = "gpr4-1";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <2>;
+ };
+};
+
+&pinctrl_imem {
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_nfc {
+ gpj0: gpj0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ hs_i2c4_bus: hs-i2c4-bus {
+ samsung,pins = "gpj0-1", "gpj0-0";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_peric {
+ gpv7: gpv7 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb0: gpb0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc2: gpc2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc3: gpc3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg0: gpg0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd0: gpd0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd1: gpd1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd2: gpd2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd4: gpd4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd8: gpd8 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd6: gpd6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd7: gpd7 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg1: gpg1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg2: gpg2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg3: gpg3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ hs_i2c8_bus: hs-i2c8-bus {
+ samsung,pins = "gpb0-1", "gpb0-0";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c9_bus: hs-i2c9-bus {
+ samsung,pins = "gpb0-3", "gpb0-2";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s1_bus: i2s1-bus {
+ samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
+ "gpd4-3", "gpd4-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm1_bus: pcm1-bus {
+ samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
+ "gpd4-3", "gpd4-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ spdif_bus: spdif-bus {
+ samsung,pins = "gpd4-3", "gpd4-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_spi_pin0: fimc-is-spi-pin0 {
+ samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_spi_pin1: fimc-is-spi-pin1 {
+ samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_bus: uart0-bus {
+ samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ };
+
+ hs_i2c2_bus: hs-i2c2-bus {
+ samsung,pins = "gpd0-3", "gpd0-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_bus: uart2-bus {
+ samsung,pins = "gpd1-5", "gpd1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ };
+
+ uart1_bus: uart1-bus {
+ samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ };
+
+ hs_i2c3_bus: hs-i2c3-bus {
+ samsung,pins = "gpd1-3", "gpd1-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c0_bus: hs-i2c0-bus {
+ samsung,pins = "gpd2-1", "gpd2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c1_bus: hs-i2c1-bus {
+ samsung,pins = "gpd2-3", "gpd2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpd2-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpd2-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm2_out: pwm2-out {
+ samsung,pins = "gpd2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm3_out: pwm3-out {
+ samsung,pins = "gpd2-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c7_bus: hs-i2c7-bus {
+ samsung,pins = "gpd2-7", "gpd2-6";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c10_bus: hs-i2c10-bus {
+ samsung,pins = "gpg3-1", "gpg3-0";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hs_i2c11_bus: hs-i2c11-bus {
+ samsung,pins = "gpg3-3", "gpg3-2";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi3_bus: spi3-bus {
+ samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi4_bus: spi4-bus {
+ samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_uart: fimc-is-uart {
+ samsung,pins = "gpc1-1", "gpc0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_ch0_i2c: fimc-is-ch0_i2c {
+ samsung,pins = "gpc2-1", "gpc2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_ch0_mclk: fimc-is-ch0_mclk {
+ samsung,pins = "gpd7-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_ch1_i2c: fimc-is-ch1-i2c {
+ samsung,pins = "gpc2-3", "gpc2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_ch1_mclk: fimc-is-ch1-mclk {
+ samsung,pins = "gpd7-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_ch2_i2c: fimc-is-ch2-i2c {
+ samsung,pins = "gpc2-5", "gpc2-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_ch2_mclk: fimc-is-ch2-mclk {
+ samsung,pins = "gpd7-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_touch {
+ gpj1: gpj1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ hs_i2c5_bus: hs-i2c5-bus {
+ samsung,pins = "gpj1-1", "gpj1-0";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
new file mode 100644
index 000000000000..9be2978f1b9a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
@@ -0,0 +1,23 @@
+/*
+ * Device tree sources for Exynos5433 TMU sensor configuration
+ *
+ * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <23>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <75>;
+samsung,tmu_min_efuse_value = <40>;
+samsung,tmu_max_efuse_value = <150>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
+samsung,tmu_mux_addr = <6>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
new file mode 100644
index 000000000000..125fe58d77ce
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Device tree sources for Exynos5433 TMU sensor configuration
+ *
+ * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <75>;
+samsung,tmu_min_efuse_value = <40>;
+samsung,tmu_max_efuse_value = <150>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
new file mode 100644
index 000000000000..ceaa05145b8a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
@@ -0,0 +1,296 @@
+/*
+ * Device tree sources for Exynos5433 thermal zone
+ *
+ * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+thermal-zones {
+ atlas0_thermal: atlas0-thermal {
+ thermal-sensors = <&tmu_atlas0>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ atlas0_alert_0: atlas0-alert-0 {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_1: atlas0-alert-1 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_2: atlas0-alert-2 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_3: atlas0-alert-3 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_4: atlas0-alert-4 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_5: atlas0-alert-5 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas0_alert_6: atlas0-alert-6 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ /* Set maximum frequency as 1800MHz */
+ trip = <&atlas0_alert_0>;
+ cooling-device = <&cpu4 1 2>;
+ };
+ map1 {
+ /* Set maximum frequency as 1700MHz */
+ trip = <&atlas0_alert_1>;
+ cooling-device = <&cpu4 2 3>;
+ };
+ map2 {
+ /* Set maximum frequency as 1600MHz */
+ trip = <&atlas0_alert_2>;
+ cooling-device = <&cpu4 3 4>;
+ };
+ map3 {
+ /* Set maximum frequency as 1500MHz */
+ trip = <&atlas0_alert_3>;
+ cooling-device = <&cpu4 4 5>;
+ };
+ map4 {
+ /* Set maximum frequency as 1400MHz */
+ trip = <&atlas0_alert_4>;
+ cooling-device = <&cpu4 5 7>;
+ };
+ map5 {
+ /* Set maximum frequencyas 1200MHz */
+ trip = <&atlas0_alert_5>;
+ cooling-device = <&cpu4 7 9>;
+ };
+ map6 {
+ /* Set maximum frequency as 1000MHz */
+ trip = <&atlas0_alert_6>;
+ cooling-device = <&cpu4 9 14>;
+ };
+ };
+ };
+
+ atlas1_thermal: atlas1-thermal {
+ thermal-sensors = <&tmu_atlas1>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ atlas1_alert_0: atlas1-alert-0 {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_1: atlas1-alert-1 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_2: atlas1-alert-2 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_3: atlas1-alert-3 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_4: atlas1-alert-4 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_5: atlas1-alert-5 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ atlas1_alert_6: atlas1-alert-6 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+
+ g3d_thermal: g3d-thermal {
+ thermal-sensors = <&tmu_g3d>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ g3d_alert_0: g3d-alert-0 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_1: g3d-alert-1 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_2: g3d-alert-2 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_3: g3d-alert-3 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_4: g3d-alert-4 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_5: g3d-alert-5 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ g3d_alert_6: g3d-alert-6 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+
+ apollo_thermal: apollo-thermal {
+ thermal-sensors = <&tmu_apollo>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ apollo_alert_0: apollo-alert-0 {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_1: apollo-alert-1 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_2: apollo-alert-2 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_3: apollo-alert-3 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_4: apollo-alert-4 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_5: apollo-alert-5 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ apollo_alert_6: apollo-alert-6 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ /* Set maximum frequency as 1200MHz */
+ trip = <&apollo_alert_2>;
+ cooling-device = <&cpu0 1 2>;
+ };
+ map1 {
+ /* Set maximum frequency as 1100MHz */
+ trip = <&apollo_alert_3>;
+ cooling-device = <&cpu0 2 3>;
+ };
+ map2 {
+ /* Set maximum frequency as 1000MHz */
+ trip = <&apollo_alert_4>;
+ cooling-device = <&cpu0 3 4>;
+ };
+ map3 {
+ /* Set maximum frequency as 900MHz */
+ trip = <&apollo_alert_5>;
+ cooling-device = <&cpu0 4 5>;
+ };
+ map4 {
+ /* Set maximum frequency as 800MHz */
+ trip = <&apollo_alert_6>;
+ cooling-device = <&cpu0 5 9>;
+ };
+ };
+ };
+
+ isp_thermal: isp-thermal {
+ thermal-sensors = <&tmu_isp>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ isp_alert_0: isp-alert-0 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_1: isp-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_2: isp-alert-2 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_3: isp-alert-3 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_4: isp-alert-4 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_5: isp-alert-5 {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ isp_alert_6: isp-alert-6 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <1000>; /* millicelsius */
+ type = "active";
+ };
+ };
+ };
+};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
new file mode 100644
index 000000000000..1188630823a7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -0,0 +1,1356 @@
+/*
+ * Samsung's Exynos5433 SoC device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's Exynos5433 SoC device nodes are listed in this file.
+ * Exynos5433 based board files can include this file and provide
+ * values for board specific bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos5433 SoC. As device tree coverage for Exynos5433 increases,
+ * additional nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos5433.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "samsung,exynos5433";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x100>;
+ clock-frequency = <1300000000>;
+ clocks = <&cmu_apollo CLK_SCLK_APOLLO>;
+ clock-names = "apolloclk";
+ operating-points-v2 = <&cluster_a53_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu at 101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x101>;
+ clock-frequency = <1300000000>;
+ operating-points-v2 = <&cluster_a53_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu2: cpu at 102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x102>;
+ clock-frequency = <1300000000>;
+ operating-points-v2 = <&cluster_a53_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu3: cpu at 103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x103>;
+ clock-frequency = <1300000000>;
+ operating-points-v2 = <&cluster_a53_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu4: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x0>;
+ clock-frequency = <1900000000>;
+ clocks = <&cmu_atlas CLK_SCLK_ATLAS>;
+ clock-names = "atlasclk";
+ operating-points-v2 = <&cluster_a57_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu5: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x1>;
+ clock-frequency = <1900000000>;
+ operating-points-v2 = <&cluster_a57_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu6: cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x2>;
+ clock-frequency = <1900000000>;
+ operating-points-v2 = <&cluster_a57_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu7: cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x3>;
+ clock-frequency = <1900000000>;
+ operating-points-v2 = <&cluster_a57_opp_table>;
+ #cooling-cells = <2>;
+ };
+ };
+
+ cluster_a53_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp at 400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <900000>;
+ };
+ opp at 500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <925000>;
+ };
+ opp at 600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <950000>;
+ };
+ opp at 700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <975000>;
+ };
+ opp at 800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp at 900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1050000>;
+ };
+ opp at 1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1075000>;
+ };
+ opp at 1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1112500>;
+ };
+ opp at 1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1112500>;
+ };
+ opp at 1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1150000>;
+ };
+ };
+
+ cluster_a57_opp_table: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp at 500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <900000>;
+ };
+ opp at 600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <900000>;
+ };
+ opp at 700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <912500>;
+ };
+ opp at 800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <912500>;
+ };
+ opp at 900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <937500>;
+ };
+ opp at 1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <975000>;
+ };
+ opp at 1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1012500>;
+ };
+ opp at 1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1037500>;
+ };
+ opp at 1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1062500>;
+ };
+ opp at 1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1087500>;
+ };
+ opp at 1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1125000>;
+ };
+ opp at 1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <1137500>;
+ };
+ opp at 1700000000 {
+ opp-hz = /bits/ 64 <1700000000>;
+ opp-microvolt = <1175000>;
+ };
+ opp at 1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1212500>;
+ };
+ opp at 1900000000 {
+ opp-hz = /bits/ 64 <1900000000>;
+ opp-microvolt = <1262500>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_off = <0x84000002>;
+ cpu_on = <0xC4000003>;
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x18000000>;
+
+ chipid at 10000000 {
+ compatible = "samsung,exynos4210-chipid";
+ reg = <0x10000000 0x100>;
+ };
+
+ xxti: xxti {
+ compatible = "fixed-clock";
+ clock-output-names = "oscclk";
+ #clock-cells = <0>;
+ };
+
+ cmu_top: clock-controller at 10030000 {
+ compatible = "samsung,exynos5433-cmu-top";
+ reg = <0x10030000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_mphy_pll",
+ "sclk_mfc_pll",
+ "sclk_bus_pll";
+ clocks = <&xxti>,
+ <&cmu_cpif CLK_SCLK_MPHY_PLL>,
+ <&cmu_mif CLK_SCLK_MFC_PLL>,
+ <&cmu_mif CLK_SCLK_BUS_PLL>;
+ };
+
+ cmu_cpif: clock-controller at 10fc0000 {
+ compatible = "samsung,exynos5433-cmu-cpif";
+ reg = <0x10fc0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk";
+ clocks = <&xxti>;
+ };
+
+ cmu_mif: clock-controller at 105b0000 {
+ compatible = "samsung,exynos5433-cmu-mif";
+ reg = <0x105b0000 0x2000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_mphy_pll";
+ clocks = <&xxti>,
+ <&cmu_cpif CLK_SCLK_MPHY_PLL>;
+ };
+
+ cmu_peric: clock-controller at 14c80000 {
+ compatible = "samsung,exynos5433-cmu-peric";
+ reg = <0x14c80000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_peris: clock-controller at 0x10040000 {
+ compatible = "samsung,exynos5433-cmu-peris";
+ reg = <0x10040000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_fsys: clock-controller at 156e0000 {
+ compatible = "samsung,exynos5433-cmu-fsys";
+ reg = <0x156e0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_ufs_mphy",
+ "div_aclk_fsys_200",
+ "sclk_pcie_100_fsys",
+ "sclk_ufsunipro_fsys",
+ "sclk_mmc2_fsys",
+ "sclk_mmc1_fsys",
+ "sclk_mmc0_fsys",
+ "sclk_usbhost30_fsys",
+ "sclk_usbdrd30_fsys";
+ clocks = <&xxti>,
+ <&cmu_cpif CLK_SCLK_UFS_MPHY>,
+ <&cmu_top CLK_DIV_ACLK_FSYS_200>,
+ <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
+ <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
+ <&cmu_top CLK_SCLK_MMC2_FSYS>,
+ <&cmu_top CLK_SCLK_MMC1_FSYS>,
+ <&cmu_top CLK_SCLK_MMC0_FSYS>,
+ <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+ <&cmu_top CLK_SCLK_USBDRD30_FSYS>;
+ };
+
+ cmu_g2d: clock-controller at 12460000 {
+ compatible = "samsung,exynos5433-cmu-g2d";
+ reg = <0x12460000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_g2d_266",
+ "aclk_g2d_400";
+ clocks = <&xxti>,
+ <&cmu_top CLK_ACLK_G2D_266>,
+ <&cmu_top CLK_ACLK_G2D_400>;
+ };
+
+ cmu_disp: clock-controller at 13b90000 {
+ compatible = "samsung,exynos5433-cmu-disp";
+ reg = <0x13b90000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_dsim1_disp",
+ "sclk_dsim0_disp",
+ "sclk_dsd_disp",
+ "sclk_decon_tv_eclk_disp",
+ "sclk_decon_vclk_disp",
+ "sclk_decon_eclk_disp",
+ "sclk_decon_tv_vclk_disp",
+ "aclk_disp_333";
+ clocks = <&xxti>,
+ <&cmu_mif CLK_SCLK_DSIM1_DISP>,
+ <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+ <&cmu_mif CLK_SCLK_DSD_DISP>,
+ <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+ <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
+ <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+ <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
+ <&cmu_mif CLK_ACLK_DISP_333>;
+ };
+
+ cmu_aud: clock-controller at 114c0000 {
+ compatible = "samsung,exynos5433-cmu-aud";
+ reg = <0x114c0000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_bus0: clock-controller at 13600000 {
+ compatible = "samsung,exynos5433-cmu-bus0";
+ reg = <0x13600000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "aclk_bus0_400";
+ clocks = <&cmu_top CLK_ACLK_BUS0_400>;
+ };
+
+ cmu_bus1: clock-controller at 14800000 {
+ compatible = "samsung,exynos5433-cmu-bus1";
+ reg = <0x14800000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "aclk_bus1_400";
+ clocks = <&cmu_top CLK_ACLK_BUS1_400>;
+ };
+
+ cmu_bus2: clock-controller at 13400000 {
+ compatible = "samsung,exynos5433-cmu-bus2";
+ reg = <0x13400000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "aclk_bus2_400";
+ clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
+ };
+
+ cmu_g3d: clock-controller at 14aa0000 {
+ compatible = "samsung,exynos5433-cmu-g3d";
+ reg = <0x14aa0000 0x2000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "aclk_g3d_400";
+ clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
+ };
+
+ cmu_gscl: clock-controller at 13cf0000 {
+ compatible = "samsung,exynos5433-cmu-gscl";
+ reg = <0x13cf0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_gscl_111",
+ "aclk_gscl_333";
+ clocks = <&xxti>,
+ <&cmu_top CLK_ACLK_GSCL_111>,
+ <&cmu_top CLK_ACLK_GSCL_333>;
+ };
+
+ cmu_apollo: clock-controller at 11900000 {
+ compatible = "samsung,exynos5433-cmu-apollo";
+ reg = <0x11900000 0x2000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "sclk_bus_pll_apollo";
+ clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
+ };
+
+ cmu_atlas: clock-controller at 11800000 {
+ compatible = "samsung,exynos5433-cmu-atlas";
+ reg = <0x11800000 0x2000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "sclk_bus_pll_atlas";
+ clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
+ };
+
+ cmu_mscl: clock-controller at 105d0000 {
+ compatible = "samsung,exynos5433-cmu-mscl";
+ reg = <0x150d0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_jpeg_mscl",
+ "aclk_mscl_400";
+ clocks = <&xxti>,
+ <&cmu_top CLK_SCLK_JPEG_MSCL>,
+ <&cmu_top CLK_ACLK_MSCL_400>;
+ };
+
+ cmu_mfc: clock-controller at 15280000 {
+ compatible = "samsung,exynos5433-cmu-mfc";
+ reg = <0x15280000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "aclk_mfc_400";
+ clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
+ };
+
+ cmu_hevc: clock-controller at 14f80000 {
+ compatible = "samsung,exynos5433-cmu-hevc";
+ reg = <0x14f80000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "aclk_hevc_400";
+ clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
+ };
+
+ cmu_isp: clock-controller at 146d0000 {
+ compatible = "samsung,exynos5433-cmu-isp";
+ reg = <0x146d0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_isp_dis_400",
+ "aclk_isp_400";
+ clocks = <&xxti>,
+ <&cmu_top CLK_ACLK_ISP_DIS_400>,
+ <&cmu_top CLK_ACLK_ISP_400>;
+ };
+
+ cmu_cam0: clock-controller at 120d0000 {
+ compatible = "samsung,exynos5433-cmu-cam0";
+ reg = <0x120d0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_cam0_333",
+ "aclk_cam0_400",
+ "aclk_cam0_552";
+ clocks = <&xxti>,
+ <&cmu_top CLK_ACLK_CAM0_333>,
+ <&cmu_top CLK_ACLK_CAM0_400>,
+ <&cmu_top CLK_ACLK_CAM0_552>;
+ };
+
+ cmu_cam1: clock-controller at 145d0000 {
+ compatible = "samsung,exynos5433-cmu-cam1";
+ reg = <0x145d0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_isp_uart_cam1",
+ "sclk_isp_spi1_cam1",
+ "sclk_isp_spi0_cam1",
+ "aclk_cam1_333",
+ "aclk_cam1_400",
+ "aclk_cam1_552";
+ clocks = <&xxti>,
+ <&cmu_top CLK_SCLK_ISP_UART_CAM1>,
+ <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
+ <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
+ <&cmu_top CLK_ACLK_CAM1_333>,
+ <&cmu_top CLK_ACLK_CAM1_400>,
+ <&cmu_top CLK_ACLK_CAM1_552>;
+ };
+
+ tmu_atlas0: tmu at 10060000 {
+ compatible = "samsung,exynos5433-tmu";
+ reg = <0x10060000 0x200>;
+ interrupts = <GIC_SPI 95 0>;
+ clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+ <&cmu_peris CLK_SCLK_TMU0>;
+ clock-names = "tmu_apbif", "tmu_sclk";
+ #include "exynos5433-tmu-sensor-conf.dtsi"
+ status = "disabled";
+ };
+
+ tmu_atlas1: tmu at 10068000 {
+ compatible = "samsung,exynos5433-tmu";
+ reg = <0x10068000 0x200>;
+ interrupts = <GIC_SPI 96 0>;
+ clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+ <&cmu_peris CLK_SCLK_TMU0>;
+ clock-names = "tmu_apbif", "tmu_sclk";
+ #include "exynos5433-tmu-sensor-conf.dtsi"
+ status = "disabled";
+ };
+
+ tmu_g3d: tmu at 10070000 {
+ compatible = "samsung,exynos5433-tmu";
+ reg = <0x10070000 0x200>;
+ interrupts = <GIC_SPI 99 0>;
+ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+ <&cmu_peris CLK_SCLK_TMU1>;
+ clock-names = "tmu_apbif", "tmu_sclk";
+ #include "exynos5433-tmu-g3d-sensor-conf.dtsi"
+ status = "disabled";
+ };
+
+ tmu_apollo: tmu at 10078000 {
+ compatible = "samsung,exynos5433-tmu";
+ reg = <0x10078000 0x200>;
+ interrupts = <GIC_SPI 115 0>;
+ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+ <&cmu_peris CLK_SCLK_TMU1>;
+ clock-names = "tmu_apbif", "tmu_sclk";
+ #include "exynos5433-tmu-sensor-conf.dtsi"
+ status = "disabled";
+ };
+
+ tmu_isp: tmu at 1007c000 {
+ compatible = "samsung,exynos5433-tmu";
+ reg = <0x1007c000 0x200>;
+ interrupts = <GIC_SPI 94 0>;
+ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+ <&cmu_peris CLK_SCLK_TMU1>;
+ clock-names = "tmu_apbif", "tmu_sclk";
+ #include "exynos5433-tmu-sensor-conf.dtsi"
+ status = "disabled";
+ };
+
+ mct at 101c0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101c0000 0x800>;
+ interrupts = <GIC_SPI 102 0>, <GIC_SPI 103 0>,
+ <GIC_SPI 104 0>, <GIC_SPI 105 0>,
+ <GIC_SPI 106 0>, <GIC_SPI 107 0>,
+ <GIC_SPI 108 0>, <GIC_SPI 109 0>,
+ <GIC_SPI 110 0>, <GIC_SPI 111 0>,
+ <GIC_SPI 112 0>, <GIC_SPI 113 0>;
+ clocks = <&xxti>, <&cmu_peris CLK_PCLK_MCT>;
+ clock-names = "fin_pll", "mct";
+ };
+
+ pinctrl_alive: pinctrl at 10580000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos7-wakeup-eint";
+ interrupts = <GIC_SPI 16 0>;
+ };
+ };
+
+ pinctrl_aud: pinctrl at 114b0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x114b0000 0x1000>;
+ interrupts = <GIC_SPI 68 0>;
+ };
+
+ pinctrl_cpif: pinctrl at 10fe0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x10fe0000 0x1000>;
+ interrupts = <GIC_SPI 179 0>;
+ };
+
+ pinctrl_ese: pinctrl at 14ca0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x14ca0000 0x1000>;
+ interrupts = <GIC_SPI 413 0>;
+ };
+
+ pinctrl_finger: pinctrl at 14cb0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x14cb0000 0x1000>;
+ interrupts = <GIC_SPI 414 0>;
+ };
+
+ pinctrl_fsys: pinctrl at 15690000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x15690000 0x1000>;
+ interrupts = <GIC_SPI 229 0>;
+ };
+
+ pinctrl_imem: pinctrl at 11090000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x11090000 0x1000>;
+ interrupts = <GIC_SPI 325 0>;
+ };
+
+ pinctrl_nfc: pinctrl at 14cd0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x14cd0000 0x1000>;
+ interrupts = <GIC_SPI 441 0>;
+ };
+
+ pinctrl_peric: pinctrl at 14cc0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x14cc0000 0x1100>;
+ interrupts = <GIC_SPI 440 0>;
+ };
+
+ pinctrl_touch: pinctrl at 14ce0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x14ce0000 0x1100>;
+ interrupts = <GIC_SPI 442 0>;
+ };
+
+ pmu_system_controller: system-controller at 105c0000 {
+ compatible = "samsung,exynos5433-pmu", "syscon";
+ reg = <0x105c0000 0x5008>;
+ #clock-cells = <1>;
+ clock-names = "clkout16";
+ clocks = <&xxti>;
+ };
+
+ gic: interrupt-controller at 11001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x11001000 0x1000>,
+ <0x11002000 0x2000>,
+ <0x11004000 0x2000>,
+ <0x11006000 0x2000>;
+ interrupts = <GIC_PPI 9 0xf04>;
+ };
+
+ mipi_phy: video-phy at 105c0710 {
+ compatible = "samsung,exynos5433-mipi-video-phy";
+ #phy-cells = <1>;
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ samsung,cam0-sysreg = <&syscon_cam0>;
+ samsung,cam1-sysreg = <&syscon_cam1>;
+ samsung,disp-sysreg = <&syscon_disp>;
+ };
+
+ decon: decon at 13800000 {
+ compatible = "samsung,exynos5433-decon";
+ reg = <0x13800000 0x2104>;
+ clocks = <&cmu_disp CLK_PCLK_DECON>,
+ <&cmu_disp CLK_ACLK_DECON>,
+ <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+ <&cmu_disp CLK_ACLK_XIU_DECON0X>,
+ <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+ <&cmu_disp CLK_SCLK_DECON_VCLK>,
+ <&cmu_disp CLK_SCLK_DECON_ECLK>;
+ clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
+ "aclk_xiu_decon0x", "pclk_smmu_decon0x",
+ "sclk_decon_vclk", "sclk_decon_eclk";
+ interrupt-names = "fifo", "vsync", "lcd_sys";
+ interrupts = <GIC_SPI 201 0>, <GIC_SPI 202 0>,
+ <GIC_SPI 203 0>;
+ samsung,disp-sysreg = <&syscon_disp>;
+ status = "disabled";
+ iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
+ iommu-names = "m0", "m1";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ decon_to_mic: endpoint {
+ remote-endpoint =
+ <&mic_to_decon>;
+ };
+ };
+ };
+ };
+
+ dsi: dsi at 13900000 {
+ compatible = "samsung,exynos5433-mipi-dsi";
+ reg = <0x13900000 0xC0>;
+ interrupts = <GIC_SPI 205 0>;
+ phys = <&mipi_phy 1>;
+ phy-names = "dsim";
+ clocks = <&cmu_disp CLK_PCLK_DSIM0>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+ <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+ <&cmu_disp CLK_SCLK_DSIM0>;
+ clock-names = "bus_clk",
+ "phyclk_mipidphy0_bitclkdiv8",
+ "phyclk_mipidphy0_rxclkesc0",
+ "sclk_rgb_vclk_to_dsim0",
+ "sclk_mipi";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ dsi_to_mic: endpoint {
+ remote-endpoint = <&mic_to_dsi>;
+ };
+ };
+ };
+ };
+
+ mic: mic at 13930000 {
+ compatible = "samsung,exynos5433-mic";
+ reg = <0x13930000 0x48>;
+ clocks = <&cmu_disp CLK_PCLK_MIC0>,
+ <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+ clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
+ samsung,disp-syscon = <&syscon_disp>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ mic_to_decon: endpoint {
+ remote-endpoint =
+ <&decon_to_mic>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ mic_to_dsi: endpoint {
+ remote-endpoint = <&dsi_to_mic>;
+ };
+ };
+ };
+ };
+
+ syscon_disp: syscon at 13b80000 {
+ compatible = "syscon";
+ reg = <0x13b80000 0x1010>;
+ };
+
+ syscon_cam0: syscon at 120f0000 {
+ compatible = "syscon";
+ reg = <0x120f0000 0x1020>;
+ };
+
+ syscon_cam1: syscon at 145f0000 {
+ compatible = "syscon";
+ reg = <0x145f0000 0x1038>;
+ };
+
+ sysmmu_decon0x: sysmmu at 0x13a00000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13a00000 0x1000>;
+ interrupts = <GIC_SPI 192 0>;
+ clock-names = "pclk", "aclk";
+ clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+ <&cmu_disp CLK_ACLK_SMMU_DECON0X>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_decon1x: sysmmu at 0x13a10000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13a10000 0x1000>;
+ interrupts = <GIC_SPI 194 0>;
+ clock-names = "pclk", "aclk";
+ clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
+ <&cmu_disp CLK_ACLK_SMMU_DECON1X>;
+ #iommu-cells = <0>;
+ };
+
+ serial_0: serial at 14c10000 {
+ compatible = "samsung,exynos5433-uart";
+ reg = <0x14c10000 0x100>;
+ interrupts = <GIC_SPI 421 0>;
+ clocks = <&cmu_peric CLK_PCLK_UART0>,
+ <&cmu_peric CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_bus>;
+ status = "disabled";
+ };
+
+ serial_1: serial at 14c20000 {
+ compatible = "samsung,exynos5433-uart";
+ reg = <0x14c20000 0x100>;
+ interrupts = <GIC_SPI 422 0>;
+ clocks = <&cmu_peric CLK_PCLK_UART1>,
+ <&cmu_peric CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_bus>;
+ status = "disabled";
+ };
+
+ serial_2: serial at 14c30000 {
+ compatible = "samsung,exynos5433-uart";
+ reg = <0x14c30000 0x100>;
+ interrupts = <GIC_SPI 423 0>;
+ clocks = <&cmu_peric CLK_PCLK_UART2>,
+ <&cmu_peric CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_bus>;
+ status = "disabled";
+ };
+
+ spi_0: spi at 14d20000 {
+ compatible = "samsung,exynos5433-spi";
+ reg = <0x14d20000 0x100>;
+ interrupts = <GIC_SPI 432 0>;
+ dmas = <&pdma0 9>, <&pdma0 8>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric CLK_PCLK_SPI0>,
+ <&cmu_peric CLK_SCLK_SPI0>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI0>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
+ num-cs = <1>;
+ status = "disabled";
+ };
+
+ spi_1: spi at 14d30000 {
+ compatible = "samsung,exynos5433-spi";
+ reg = <0x14d30000 0x100>;
+ interrupts = <GIC_SPI 433 0>;
+ dmas = <&pdma0 11>, <&pdma0 10>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric CLK_PCLK_SPI1>,
+ <&cmu_peric CLK_SCLK_SPI1>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI1>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
+ num-cs = <1>;
+ status = "disabled";
+ };
+
+ spi_2: spi at 14d40000 {
+ compatible = "samsung,exynos5433-spi";
+ reg = <0x14d40000 0x100>;
+ interrupts = <GIC_SPI 434 0>;
+ dmas = <&pdma0 13>, <&pdma0 12>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric CLK_PCLK_SPI2>,
+ <&cmu_peric CLK_SCLK_SPI2>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI2>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_bus>;
+ num-cs = <1>;
+ status = "disabled";
+ };
+
+ spi_3: spi at 14d50000 {
+ compatible = "samsung,exynos5433-spi";
+ reg = <0x14d50000 0x100>;
+ interrupts = <GIC_SPI 447 0>;
+ dmas = <&pdma0 23>, <&pdma0 22>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric CLK_PCLK_SPI3>,
+ <&cmu_peric CLK_SCLK_SPI3>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI3>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_bus>;
+ num-cs = <1>;
+ status = "disabled";
+ };
+
+ spi_4: spi at 14d00000 {
+ compatible = "samsung,exynos5433-spi";
+ reg = <0x14d00000 0x100>;
+ interrupts = <GIC_SPI 412 0>;
+ dmas = <&pdma0 25>, <&pdma0 24>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric CLK_PCLK_SPI4>,
+ <&cmu_peric CLK_SCLK_SPI4>,
+ <&cmu_peric CLK_SCLK_IOCLK_SPI4>;
+ clock-names = "spi", "spi_busclk0", "spi_ioclk";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_bus>;
+ num-cs = <1>;
+ status = "disabled";
+ };
+
+ adc: adc at 14d10000 {
+ compatible = "samsung,exynos7-adc";
+ reg = <0x14d10000 0x100>;
+ interrupts = <GIC_SPI 438 0>;
+ clock-names = "adc";
+ clocks = <&cmu_peric CLK_PCLK_ADCIF>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+ status = "disabled";
+ };
+
+ pwm: pwm at 14dd0000 {
+ compatible = "samsung,exynos4210-pwm";
+ reg = <0x14dd0000 0x100>;
+ interrupts = <GIC_SPI 416 0>, <GIC_SPI 417 0>,
+ <GIC_SPI 418 0>, <GIC_SPI 419 0>,
+ <GIC_SPI 420 0>;
+ samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+ clocks = <&cmu_peric CLK_PCLK_PWM>;
+ clock-names = "timers";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ hsi2c_0: hsi2c at 14e40000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14e40000 0x1000>;
+ interrupts = <GIC_SPI 428 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c0_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C0>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_1: hsi2c at 14e50000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14e50000 0x1000>;
+ interrupts = <GIC_SPI 429 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c1_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C1>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_2: hsi2c at 14e60000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14e60000 0x1000>;
+ interrupts = <GIC_SPI 430 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c2_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C2>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_3: hsi2c at 14e70000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14e70000 0x1000>;
+ interrupts = <GIC_SPI 431 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c3_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C3>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_4: hsi2c at 14ec0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14ec0000 0x1000>;
+ interrupts = <GIC_SPI 424 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c4_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C4>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_5: hsi2c at 14ed0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14ed0000 0x1000>;
+ interrupts = <GIC_SPI 425 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c5_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C5>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_6: hsi2c at 14ee0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14ee0000 0x1000>;
+ interrupts = <GIC_SPI 426 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c6_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C6>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_7: hsi2c at 14ef0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14ef0000 0x1000>;
+ interrupts = <GIC_SPI 427 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c7_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C7>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_8: hsi2c at 14d90000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14d90000 0x1000>;
+ interrupts = <GIC_SPI 443 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c8_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C8>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_9: hsi2c at 14da0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14da0000 0x1000>;
+ interrupts = <GIC_SPI 444 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c9_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C9>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_10: hsi2c at 14de0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14de0000 0x1000>;
+ interrupts = <GIC_SPI 445 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c10_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C10>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_11: hsi2c at 14df0000 {
+ compatible = "samsung,exynos7-hsi2c";
+ reg = <0x14df0000 0x1000>;
+ interrupts = <GIC_SPI 446 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hs_i2c11_bus>;
+ clocks = <&cmu_peric CLK_PCLK_HSI2C11>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ usbdrd30: usb at 15400000 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
+ <&cmu_fsys CLK_SCLK_USBDRD30>;
+ clock-names = "usbdrd30", "usbdrd30_susp_clk";
+ assigned-clocks =
+ <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
+ <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
+ <&cmu_top CLK_DIV_SCLK_USBDRD30>;
+ assigned-clock-parents =
+ <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
+ <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+ assigned-clock-rates = <0>, <0>, <66700000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ dwc3 at 15400000 {
+ compatible = "snps,dwc3";
+ reg = <0x15400000 0x10000>;
+ interrupts = <GIC_SPI 231 0>;
+ phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usbdrd30_phy: phy at 15500000 {
+ compatible = "samsung,exynos5433-usbdrd-phy";
+ reg = <0x15500000 0x100>;
+ clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>,
+ <&cmu_fsys CLK_SCLK_USBDRD30>;
+ clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
+ "itp";
+ assigned-clocks =
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>;
+ assigned-clock-parents =
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>;
+ #phy-cells = <1>;
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ status = "disabled";
+ };
+
+ usbhost30_phy: phy at 15580000 {
+ compatible = "samsung,exynos5433-usbdrd-phy";
+ reg = <0x15580000 0x100>;
+ clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>,
+ <&cmu_fsys CLK_SCLK_USBHOST30>;
+ clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
+ "itp";
+ assigned-clocks =
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>;
+ assigned-clock-parents =
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
+ #phy-cells = <1>;
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ status = "disabled";
+ };
+
+ usbhost30: usb at 15a00000 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
+ <&cmu_fsys CLK_SCLK_USBHOST30>;
+ clock-names = "usbdrd30", "usbdrd30_susp_clk";
+ assigned-clocks =
+ <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
+ <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
+ <&cmu_top CLK_DIV_SCLK_USBHOST30>;
+ assigned-clock-parents =
+ <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+ <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+ assigned-clock-rates = <0>, <0>, <66700000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ usbdrd_dwc3_0: dwc3 at 15a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x15a00000 0x10000>;
+ interrupts = <GIC_SPI 244 0>;
+ phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ mshc_0: mshc at 15540000 {
+ compatible = "samsung,exynos7-dw-mshc-smu";
+ interrupts = <GIC_SPI 225 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x15540000 0x2000>;
+ clocks = <&cmu_fsys CLK_ACLK_MMC0>,
+ <&cmu_fsys CLK_SCLK_MMC0>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ mshc_1: mshc at 15550000 {
+ compatible = "samsung,exynos7-dw-mshc-smu";
+ interrupts = <GIC_SPI 226 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x15550000 0x2000>;
+ clocks = <&cmu_fsys CLK_ACLK_MMC1>,
+ <&cmu_fsys CLK_SCLK_MMC1>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ mshc_2: mshc at 15560000 {
+ compatible = "samsung,exynos7-dw-mshc-smu";
+ interrupts = <GIC_SPI 227 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x15560000 0x2000>;
+ clocks = <&cmu_fsys CLK_ACLK_MMC2>,
+ <&cmu_fsys CLK_SCLK_MMC2>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma0: pdma at 15610000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x15610000 0x1000>;
+ interrupts = <GIC_SPI 228 0>;
+ clocks = <&cmu_fsys CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma at 15600000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x15600000 0x1000>;
+ interrupts = <GIC_SPI 246 0>;
+ clocks = <&cmu_fsys CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+ };
+
+ audio-subsystem at 11400000 {
+ compatible = "samsung,exynos5433-lpass";
+ reg = <0x11400000 0x100>, <0x11500000 0x08>;
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ adma: adma at 11420000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x11420000 0x1000>;
+ interrupts = <GIC_SPI 73 0>;
+ clocks = <&cmu_aud CLK_ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ i2s0: i2s0 at 11440000 {
+ compatible = "samsung,exynos7-i2s";
+ reg = <0x11440000 0x100>;
+ dmas = <&adma 0 &adma 2>;
+ dma-names = "tx", "rx";
+ interrupts = <GIC_SPI 70 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
+ <&cmu_aud CLK_SCLK_AUD_I2S>,
+ <&cmu_aud CLK_SCLK_I2S_BCLK>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ status = "disabled";
+ };
+
+ serial_3: serial at 11460000 {
+ compatible = "samsung,exynos5433-uart";
+ reg = <0x11460000 0x100>;
+ interrupts = <GIC_SPI 67 0>;
+ clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
+ <&cmu_aud CLK_SCLK_AUD_UART>;
+ clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart_aud_bus>;
+ status = "disabled";
+ };
+ };
+ };
+
+ timer: timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+};
+
+#include "exynos5433-pinctrl.dtsi"
+#include "exynos5433-tmu.dtsi"
--
1.9.1
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v3 4/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
2016-11-03 6:39 ` Chanwoo Choi
@ 2016-11-03 6:39 ` Chanwoo Choi
-1 siblings, 0 replies; 43+ messages in thread
From: Chanwoo Choi @ 2016-11-03 6:39 UTC (permalink / raw)
To: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel
Cc: cw00.choi, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, andi.shyti,
chanwoo
This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board.
This board fully support the all things for mobile target.
This patch supports the following devices:
1. basic SoC
- Initial booting for Samsung Exynos5433 SoC
- DRAM LPDDR3 (3GB)
- eMMC (32GB)
- ARM architecture timer
2. power management devices
- Sasmung S2MPS13 PMIC for the power supply
- CPUFREQ for big.LITTLE cores
- TMU for big.LITTLE cores and GPU
- ADC with thermistor to measure the temperature of AP/Battery/Charger
- Maxim MAX77843 Interface PMIC (MUIC/Haptic/Regulator)
3. sound devices
- I2S for sound bus
- LPASS for sound power control
- Wolfson WM5110 for sound codec
- Maxim MAX98504 for speaker amplifier
- TM2 ASoC Machine device driver node
3. display devices
- DECON, DSI and MIC for the panel output
4. usb devices
- USB 3.0 DRD (Dual Role Device)
- USB 3.0 Host controller
5. storage devices
- MSHC (Mobile Storage Host Controller) for eMMC device
6. misc devices
- gpio-keys (power, volume up/down, home key)
- PWM (Pulse Width Modulation Timer)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
.../bindings/arm/samsung/samsung-boards.txt | 1 +
arch/arm64/boot/dts/exynos/Makefile | 4 +-
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 974 +++++++++++++++++++++
3 files changed, 978 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 0ea7f14ef294..339af8b9cdc5 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -15,6 +15,7 @@ Required root node properties:
- "samsung,xyref5260" - for Exynos5260-based Samsung board.
- "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
- "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
+ - "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
- "samsung,sd5v1" - for Exynos5440-based Samsung board.
- "samsung,ssdk5440" - for Exynos5440-based Samsung board.
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 50c9b9383cfa..947c750acba1 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -1,4 +1,6 @@
-dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb
+dtb-$(CONFIG_ARCH_EXYNOS) += \
+ exynos5433-tm2.dtb \
+ exynos7-espresso.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
new file mode 100644
index 000000000000..9ea3f32bae9e
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -0,0 +1,974 @@
+/*
+ * SAMSUNG Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2 board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5433.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Samsung TM2 board";
+ compatible = "samsung,tm2", "samsung,exynos5433";
+
+ aliases {
+ pinctrl0 = &pinctrl_alive;
+ pinctrl1 = &pinctrl_aud;
+ pinctrl2 = &pinctrl_cpif;
+ pinctrl3 = &pinctrl_ese;
+ pinctrl4 = &pinctrl_finger;
+ pinctrl5 = &pinctrl_fsys;
+ pinctrl6 = &pinctrl_imem;
+ pinctrl7 = &pinctrl_nfc;
+ pinctrl8 = &pinctrl_peric;
+ pinctrl9 = &pinctrl_touch;
+ serial0 = &serial_0;
+ serial1 = &serial_1;
+ serial2 = &serial_2;
+ serial3 = &serial_3;
+ spi0 = &spi_0;
+ spi1 = &spi_1;
+ spi2 = &spi_2;
+ spi3 = &spi_3;
+ spi4 = &spi_4;
+ };
+
+ chosen {
+ stdout-path = &serial_1;
+ };
+
+ memory@20000000 {
+ device_type = "memory";
+ reg = <0x0 0x20000000 0x0 0xc0000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power-key {
+ gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "power key";
+ debounce-interval = <10>;
+ };
+
+ volume-up-key {
+ gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ label = "volume-up key";
+ debounce-interval = <10>;
+ };
+
+ volume-down-key {
+ gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "volume-down key";
+ debounce-interval = <10>;
+ };
+
+ homepage-key {
+ gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ label = "homepage key";
+ debounce-interval = <10>;
+ };
+ };
+
+ i2c_max98504: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
+ &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ max98504: max98504@31 {
+ compatible = "maxim,max98504";
+ reg = <0x31>;
+ maxim,rx-path = <1>;
+ maxim,tx-path = <1>;
+ maxim,tx-channel-mask = <3>;
+ maxim,tx-channel-source = <2>;
+ };
+ };
+
+ sound {
+ compatible = "samsung,tm2-audio";
+ audio-codec = <&wm5110>;
+ i2s-controller = <&i2s0>;
+ audio-amplifier = <&max98504>;
+ mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+ model = "wm5110";
+ samsung,audio-routing =
+ /* Headphone */
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ /* Speaker */
+ "SPK", "SPKOUT",
+ "SPKOUT", "HPOUT2L",
+ "SPKOUT", "HPOUT2R",
+
+ /* Receiver */
+ "RCV", "HPOUT3L",
+ "RCV", "HPOUT3R";
+ status = "okay";
+ };
+};
+
+&adc {
+ vdd-supply = <&ldo3_reg>;
+ status = "okay";
+
+ thermistor-ap {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 0>;
+ };
+
+ thermistor-battery {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 1>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermistor-charger {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 2>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&buck3_reg>;
+};
+
+&cpu4 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&decon {
+ status = "okay";
+
+ i80-if-timings {
+ };
+};
+
+&dsi {
+ status = "okay";
+ vddcore-supply = <&ldo6_reg>;
+ vddio-supply = <&ldo7_reg>;
+ samsung,pll-clock-frequency = <24000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&te_irq>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ samsung,burst-clock-frequency = <512000000>;
+ samsung,esc-clock-frequency = <16000000>;
+ };
+ };
+ };
+};
+
+&hsi2c_0 {
+ status = "okay";
+ clock-frequency = <2500000>;
+
+ s2mps13-pmic@66 {
+ compatible = "samsung,s2mps13-pmic";
+ interrupt-parent = <&gpa0>;
+ interrupts = <7 IRQ_TYPE_NONE>;
+ reg = <0x66>;
+ samsung,s2mps11-wrstbi-ground;
+
+ s2mps13_osc: clocks {
+ compatible = "samsung,s2mps13-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps13_ap", "s2mps13_cp",
+ "s2mps13_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_0.9V_AP";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_MMC2_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD1_E_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD10_MIF_PLL_1.0V_AP";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD10_DPLL_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MIPI2L_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD18_MIPI2L_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD18_LLI_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD18_ABB_ETC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD33_USB30_3.0V_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_INT_M_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_KFC_M_1.1V_AP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDD_G3D_M_0.95V_AP";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDDQ_M1_LDO_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDDQ_M2_LDO_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDDQ_EFUSE";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "V_TFLASH_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "V_CODEC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "VDDA_1.8V_COMP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VCC_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VT_CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "CAM_IO_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "CAM_SEN_CORE_1.2V_AP";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VT_CAM_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "CAM_SEN_A2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "CAM_AF_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "VCC_3.0V_LCD_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "VCC_1.8V_LCD_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "VT_CAM_2.8V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo30_reg: LDO30 {
+ regulator-name = "TSP_AVDD_3.3V_AP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "TSP_VDD_1.85V_AP";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "VTOUCH_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "VTOUCH_LED_3.3V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ };
+
+ ldo34_reg: LDO34 {
+ regulator-name = "VCC_1.8V_MHL_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "OIS_VM_2.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo36_reg: LDO36 {
+ regulator-name = "VSIL_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo37_reg: LDO37 {
+ regulator-name = "VF_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "VCC_3.0V_MOTOR_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo39_reg: LDO39 {
+ regulator-name = "V_HRM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo40_reg: LDO40 {
+ regulator-name = "V_HRM_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VDD_EGL_1.0V_AP";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VDD_KFC_1.0V_AP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VDD_INT_0.95V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_DISP_CAM0_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "VDD_G3D_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VDD_MEM1_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VDD_LLDO_1.35V_AP";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_MLDO_2.0V_AP";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_mem2";
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&hsi2c_8 {
+ status = "okay";
+
+ max77843@66 {
+ compatible = "maxim,max77843";
+ interrupt-parent = <&gpa1>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x66>;
+
+ muic: max77843-muic {
+ compatible = "maxim,max77843-muic";
+ };
+
+ regulators {
+ compatible = "maxim,max77843-regulator";
+ safeout1_reg: SAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ safeout2_reg: SAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ charger_reg: CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <3150000>;
+ };
+ };
+
+ haptic: max77843-haptic {
+ compatible = "maxim,max77843-haptic";
+ haptic-supply = <&ldo38_reg>;
+ pwms = <&pwm 0 33670 0>;
+ pwm-names = "haptic";
+ };
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mshc_0 {
+ status = "okay";
+ num-slots = <1>;
+ non-removable;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-hs400-timing = <0 3>;
+ samsung,read-strobe-delay = <90>;
+ fifo-depth = <0x80>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
+ &sd0_bus8 &sd0_rdqs>;
+ bus-width = <8>;
+ assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
+ assigned-clock-rates = <800000000>;
+};
+
+&pinctrl_alive {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_alive>;
+
+ initial_alive: initial-state {
+ PIN(IN, gpa0-0, DOWN, LV1);
+ PIN(IN, gpa0-1, NONE, LV1);
+ PIN(IN, gpa0-2, DOWN, LV1);
+ PIN(IN, gpa0-3, NONE, LV1);
+ PIN(IN, gpa0-4, NONE, LV1);
+ PIN(IN, gpa0-5, DOWN, LV1);
+ PIN(IN, gpa0-6, NONE, LV1);
+ PIN(IN, gpa0-7, NONE, LV1);
+
+ PIN(IN, gpa1-0, UP, LV1);
+ PIN(IN, gpa1-1, NONE, LV1);
+ PIN(IN, gpa1-2, NONE, LV1);
+ PIN(IN, gpa1-3, DOWN, LV1);
+ PIN(IN, gpa1-4, DOWN, LV1);
+ PIN(IN, gpa1-5, NONE, LV1);
+ PIN(IN, gpa1-6, NONE, LV1);
+ PIN(IN, gpa1-7, NONE, LV1);
+
+ PIN(IN, gpa2-0, NONE, LV1);
+ PIN(IN, gpa2-1, NONE, LV1);
+ PIN(IN, gpa2-2, NONE, LV1);
+ PIN(IN, gpa2-3, DOWN, LV1);
+ PIN(IN, gpa2-4, NONE, LV1);
+ PIN(IN, gpa2-5, DOWN, LV1);
+ PIN(IN, gpa2-6, DOWN, LV1);
+ PIN(IN, gpa2-7, NONE, LV1);
+
+ PIN(IN, gpa3-0, DOWN, LV1);
+ PIN(IN, gpa3-1, DOWN, LV1);
+ PIN(IN, gpa3-2, NONE, LV1);
+ PIN(IN, gpa3-3, DOWN, LV1);
+ PIN(IN, gpa3-4, NONE, LV1);
+ PIN(IN, gpa3-5, DOWN, LV1);
+ PIN(IN, gpa3-6, DOWN, LV1);
+ PIN(IN, gpa3-7, DOWN, LV1);
+
+ PIN(IN, gpf1-0, NONE, LV1);
+ PIN(IN, gpf1-1, NONE, LV1);
+ PIN(IN, gpf1-2, DOWN, LV1);
+ PIN(IN, gpf1-4, UP, LV1);
+ PIN(OUT, gpf1-5, NONE, LV1);
+ PIN(IN, gpf1-6, DOWN, LV1);
+ PIN(IN, gpf1-7, DOWN, LV1);
+
+ PIN(IN, gpf2-0, DOWN, LV1);
+ PIN(IN, gpf2-1, DOWN, LV1);
+ PIN(IN, gpf2-2, DOWN, LV1);
+ PIN(IN, gpf2-3, DOWN, LV1);
+
+ PIN(IN, gpf3-0, DOWN, LV1);
+ PIN(IN, gpf3-1, DOWN, LV1);
+ PIN(IN, gpf3-2, NONE, LV1);
+ PIN(IN, gpf3-3, DOWN, LV1);
+
+ PIN(IN, gpf4-0, DOWN, LV1);
+ PIN(IN, gpf4-1, DOWN, LV1);
+ PIN(IN, gpf4-2, DOWN, LV1);
+ PIN(IN, gpf4-3, DOWN, LV1);
+ PIN(IN, gpf4-4, DOWN, LV1);
+ PIN(IN, gpf4-5, DOWN, LV1);
+ PIN(IN, gpf4-6, DOWN, LV1);
+ PIN(IN, gpf4-7, DOWN, LV1);
+
+ PIN(IN, gpf5-0, DOWN, LV1);
+ PIN(IN, gpf5-1, DOWN, LV1);
+ PIN(IN, gpf5-2, DOWN, LV1);
+ PIN(IN, gpf5-3, DOWN, LV1);
+ PIN(OUT, gpf5-4, NONE, LV1);
+ PIN(IN, gpf5-5, DOWN, LV1);
+ PIN(IN, gpf5-6, DOWN, LV1);
+ PIN(IN, gpf5-7, DOWN, LV1);
+ };
+
+ te_irq: te_irq {
+ samsung,pins = "gpf1-3";
+ samsung,pin-function = <0xf>;
+ };
+};
+
+&pinctrl_cpif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_cpif>;
+
+ initial_cpif: initial-state {
+ PIN(IN, gpv6-0, DOWN, LV1);
+ PIN(IN, gpv6-1, DOWN, LV1);
+ };
+};
+
+&pinctrl_ese {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_ese>;
+
+ initial_ese: initial-state {
+ PIN(IN, gpj2-0, DOWN, LV1);
+ PIN(IN, gpj2-1, DOWN, LV1);
+ PIN(IN, gpj2-2, DOWN, LV1);
+ };
+};
+
+&pinctrl_fsys {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_fsys>;
+
+ initial_fsys: initial-state {
+ PIN(IN, gpr3-0, NONE, LV1);
+ PIN(IN, gpr3-1, DOWN, LV1);
+ PIN(IN, gpr3-2, DOWN, LV1);
+ PIN(IN, gpr3-3, DOWN, LV1);
+ PIN(IN, gpr3-7, NONE, LV1);
+ };
+};
+
+&pinctrl_imem {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_imem>;
+
+ initial_imem: initial-state {
+ PIN(IN, gpf0-0, UP, LV1);
+ PIN(IN, gpf0-1, UP, LV1);
+ PIN(IN, gpf0-2, DOWN, LV1);
+ PIN(IN, gpf0-3, UP, LV1);
+ PIN(IN, gpf0-4, DOWN, LV1);
+ PIN(IN, gpf0-5, NONE, LV1);
+ PIN(IN, gpf0-6, DOWN, LV1);
+ PIN(IN, gpf0-7, UP, LV1);
+ };
+};
+
+&pinctrl_nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_nfc>;
+
+ initial_nfc: initial-state {
+ PIN(IN, gpj0-2, DOWN, LV1);
+ };
+};
+
+&pinctrl_peric {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_peric>;
+
+ initial_peric: initial-state {
+ PIN(IN, gpv7-0, DOWN, LV1);
+ PIN(IN, gpv7-1, DOWN, LV1);
+ PIN(IN, gpv7-2, NONE, LV1);
+ PIN(IN, gpv7-3, DOWN, LV1);
+ PIN(IN, gpv7-4, DOWN, LV1);
+ PIN(IN, gpv7-5, DOWN, LV1);
+
+ PIN(IN, gpb0-4, DOWN, LV1);
+
+ PIN(IN, gpc0-2, DOWN, LV1);
+ PIN(IN, gpc0-5, DOWN, LV1);
+ PIN(IN, gpc0-7, DOWN, LV1);
+
+ PIN(IN, gpc1-1, DOWN, LV1);
+
+ PIN(IN, gpc3-4, NONE, LV1);
+ PIN(IN, gpc3-5, NONE, LV1);
+ PIN(IN, gpc3-6, NONE, LV1);
+ PIN(IN, gpc3-7, NONE, LV1);
+
+ PIN(OUT, gpg0-0, NONE, LV1);
+ PIN(FUNC1, gpg0-1, DOWN, LV1);
+
+ PIN(IN, gpd2-5, DOWN, LV1);
+
+ PIN(IN, gpd4-0, NONE, LV1);
+ PIN(IN, gpd4-1, DOWN, LV1);
+ PIN(IN, gpd4-2, DOWN, LV1);
+ PIN(IN, gpd4-3, DOWN, LV1);
+ PIN(IN, gpd4-4, DOWN, LV1);
+
+ PIN(IN, gpd6-3, DOWN, LV1);
+
+ PIN(IN, gpd8-1, UP, LV1);
+
+ PIN(IN, gpg1-0, DOWN, LV1);
+ PIN(IN, gpg1-1, DOWN, LV1);
+ PIN(IN, gpg1-2, DOWN, LV1);
+ PIN(IN, gpg1-3, DOWN, LV1);
+ PIN(IN, gpg1-4, DOWN, LV1);
+
+ PIN(IN, gpg2-0, DOWN, LV1);
+ PIN(IN, gpg2-1, DOWN, LV1);
+
+ PIN(IN, gpg3-0, DOWN, LV1);
+ PIN(IN, gpg3-1, DOWN, LV1);
+ PIN(IN, gpg3-5, DOWN, LV1);
+ PIN(IN, gpg3-7, DOWN, LV1);
+ };
+};
+
+&pinctrl_touch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_touch>;
+
+ initial_touch: initial-state {
+ PIN(IN, gpj1-2, DOWN, LV1);
+ };
+};
+
+&pwm {
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&mic {
+ status = "okay";
+
+ i80-if-timings {
+ };
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&serial_3 {
+ assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
+ assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
+ status = "okay";
+};
+
+&spi_1 {
+ cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ wm5110: wm5110-codec@0 {
+ compatible = "wlf,wm5110";
+ reg = <0x0>;
+ spi-max-frequency = <20000000>;
+ interrupt-parent = <&gpa0>;
+ interrupts = <4 IRQ_TYPE_NONE>;
+ clocks = <&pmu_system_controller 0>,
+ <&s2mps13_osc S2MPS11_CLK_BT>;
+ clock-names = "mclk1", "mclk2";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ wlf,micd-detect-debounce = <300>;
+ wlf,micd-bias-start-time = <0x1>;
+ wlf,micd-rate = <0x7>;
+ wlf,micd-dbtime = <0x1>;
+ wlf,micd-force-micbias;
+ wlf,micd-configs = <0x0 1 0>;
+ wlf,hpdet-channel = <1>;
+ wlf,gpsw = <0x1>;
+ wlf,inmode = <2 0 2 0>;
+
+ wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+ wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+ /* core supplies */
+ AVDD-supply = <&ldo18_reg>;
+ DBVDD1-supply = <&ldo18_reg>;
+ CPVDD-supply = <&ldo18_reg>;
+ DBVDD2-supply = <&ldo18_reg>;
+ DBVDD3-supply = <&ldo18_reg>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
+ };
+ };
+};
+
+&timer {
+ clock-frequency = <24000000>;
+};
+
+&tmu_atlas0 {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&tmu_apollo {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&tmu_g3d {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&usbdrd30 {
+ vdd33-supply = <&ldo10_reg>;
+ vdd10-supply = <&ldo6_reg>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "otg";
+};
+
+&usbdrd30_phy {
+ vbus-supply = <&safeout1_reg>;
+ status = "okay";
+};
+
+&xxti {
+ clock-frequency = <24000000>;
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v3 4/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
@ 2016-11-03 6:39 ` Chanwoo Choi
0 siblings, 0 replies; 43+ messages in thread
From: Chanwoo Choi @ 2016-11-03 6:39 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board.
This board fully support the all things for mobile target.
This patch supports the following devices:
1. basic SoC
- Initial booting for Samsung Exynos5433 SoC
- DRAM LPDDR3 (3GB)
- eMMC (32GB)
- ARM architecture timer
2. power management devices
- Sasmung S2MPS13 PMIC for the power supply
- CPUFREQ for big.LITTLE cores
- TMU for big.LITTLE cores and GPU
- ADC with thermistor to measure the temperature of AP/Battery/Charger
- Maxim MAX77843 Interface PMIC (MUIC/Haptic/Regulator)
3. sound devices
- I2S for sound bus
- LPASS for sound power control
- Wolfson WM5110 for sound codec
- Maxim MAX98504 for speaker amplifier
- TM2 ASoC Machine device driver node
3. display devices
- DECON, DSI and MIC for the panel output
4. usb devices
- USB 3.0 DRD (Dual Role Device)
- USB 3.0 Host controller
5. storage devices
- MSHC (Mobile Storage Host Controller) for eMMC device
6. misc devices
- gpio-keys (power, volume up/down, home key)
- PWM (Pulse Width Modulation Timer)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
.../bindings/arm/samsung/samsung-boards.txt | 1 +
arch/arm64/boot/dts/exynos/Makefile | 4 +-
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 974 +++++++++++++++++++++
3 files changed, 978 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 0ea7f14ef294..339af8b9cdc5 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -15,6 +15,7 @@ Required root node properties:
- "samsung,xyref5260" - for Exynos5260-based Samsung board.
- "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
- "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
+ - "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
- "samsung,sd5v1" - for Exynos5440-based Samsung board.
- "samsung,ssdk5440" - for Exynos5440-based Samsung board.
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 50c9b9383cfa..947c750acba1 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -1,4 +1,6 @@
-dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb
+dtb-$(CONFIG_ARCH_EXYNOS) += \
+ exynos5433-tm2.dtb \
+ exynos7-espresso.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
new file mode 100644
index 000000000000..9ea3f32bae9e
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -0,0 +1,974 @@
+/*
+ * SAMSUNG Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2 board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5433.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Samsung TM2 board";
+ compatible = "samsung,tm2", "samsung,exynos5433";
+
+ aliases {
+ pinctrl0 = &pinctrl_alive;
+ pinctrl1 = &pinctrl_aud;
+ pinctrl2 = &pinctrl_cpif;
+ pinctrl3 = &pinctrl_ese;
+ pinctrl4 = &pinctrl_finger;
+ pinctrl5 = &pinctrl_fsys;
+ pinctrl6 = &pinctrl_imem;
+ pinctrl7 = &pinctrl_nfc;
+ pinctrl8 = &pinctrl_peric;
+ pinctrl9 = &pinctrl_touch;
+ serial0 = &serial_0;
+ serial1 = &serial_1;
+ serial2 = &serial_2;
+ serial3 = &serial_3;
+ spi0 = &spi_0;
+ spi1 = &spi_1;
+ spi2 = &spi_2;
+ spi3 = &spi_3;
+ spi4 = &spi_4;
+ };
+
+ chosen {
+ stdout-path = &serial_1;
+ };
+
+ memory at 20000000 {
+ device_type = "memory";
+ reg = <0x0 0x20000000 0x0 0xc0000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power-key {
+ gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "power key";
+ debounce-interval = <10>;
+ };
+
+ volume-up-key {
+ gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ label = "volume-up key";
+ debounce-interval = <10>;
+ };
+
+ volume-down-key {
+ gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "volume-down key";
+ debounce-interval = <10>;
+ };
+
+ homepage-key {
+ gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ label = "homepage key";
+ debounce-interval = <10>;
+ };
+ };
+
+ i2c_max98504: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
+ &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ max98504: max98504 at 31 {
+ compatible = "maxim,max98504";
+ reg = <0x31>;
+ maxim,rx-path = <1>;
+ maxim,tx-path = <1>;
+ maxim,tx-channel-mask = <3>;
+ maxim,tx-channel-source = <2>;
+ };
+ };
+
+ sound {
+ compatible = "samsung,tm2-audio";
+ audio-codec = <&wm5110>;
+ i2s-controller = <&i2s0>;
+ audio-amplifier = <&max98504>;
+ mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+ model = "wm5110";
+ samsung,audio-routing =
+ /* Headphone */
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ /* Speaker */
+ "SPK", "SPKOUT",
+ "SPKOUT", "HPOUT2L",
+ "SPKOUT", "HPOUT2R",
+
+ /* Receiver */
+ "RCV", "HPOUT3L",
+ "RCV", "HPOUT3R";
+ status = "okay";
+ };
+};
+
+&adc {
+ vdd-supply = <&ldo3_reg>;
+ status = "okay";
+
+ thermistor-ap {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 0>;
+ };
+
+ thermistor-battery {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 1>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermistor-charger {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 2>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&buck3_reg>;
+};
+
+&cpu4 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&decon {
+ status = "okay";
+
+ i80-if-timings {
+ };
+};
+
+&dsi {
+ status = "okay";
+ vddcore-supply = <&ldo6_reg>;
+ vddio-supply = <&ldo7_reg>;
+ samsung,pll-clock-frequency = <24000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&te_irq>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ samsung,burst-clock-frequency = <512000000>;
+ samsung,esc-clock-frequency = <16000000>;
+ };
+ };
+ };
+};
+
+&hsi2c_0 {
+ status = "okay";
+ clock-frequency = <2500000>;
+
+ s2mps13-pmic at 66 {
+ compatible = "samsung,s2mps13-pmic";
+ interrupt-parent = <&gpa0>;
+ interrupts = <7 IRQ_TYPE_NONE>;
+ reg = <0x66>;
+ samsung,s2mps11-wrstbi-ground;
+
+ s2mps13_osc: clocks {
+ compatible = "samsung,s2mps13-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps13_ap", "s2mps13_cp",
+ "s2mps13_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_0.9V_AP";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_MMC2_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD1_E_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD10_MIF_PLL_1.0V_AP";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD10_DPLL_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MIPI2L_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD18_MIPI2L_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD18_LLI_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD18_ABB_ETC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD33_USB30_3.0V_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_INT_M_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_KFC_M_1.1V_AP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDD_G3D_M_0.95V_AP";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDDQ_M1_LDO_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDDQ_M2_LDO_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDDQ_EFUSE";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "V_TFLASH_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "V_CODEC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "VDDA_1.8V_COMP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VCC_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VT_CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "CAM_IO_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "CAM_SEN_CORE_1.2V_AP";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VT_CAM_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "CAM_SEN_A2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "CAM_AF_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "VCC_3.0V_LCD_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "VCC_1.8V_LCD_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "VT_CAM_2.8V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo30_reg: LDO30 {
+ regulator-name = "TSP_AVDD_3.3V_AP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "TSP_VDD_1.85V_AP";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "VTOUCH_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "VTOUCH_LED_3.3V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ };
+
+ ldo34_reg: LDO34 {
+ regulator-name = "VCC_1.8V_MHL_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "OIS_VM_2.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo36_reg: LDO36 {
+ regulator-name = "VSIL_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo37_reg: LDO37 {
+ regulator-name = "VF_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "VCC_3.0V_MOTOR_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo39_reg: LDO39 {
+ regulator-name = "V_HRM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo40_reg: LDO40 {
+ regulator-name = "V_HRM_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VDD_EGL_1.0V_AP";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VDD_KFC_1.0V_AP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VDD_INT_0.95V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_DISP_CAM0_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "VDD_G3D_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VDD_MEM1_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VDD_LLDO_1.35V_AP";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_MLDO_2.0V_AP";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_mem2";
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&hsi2c_8 {
+ status = "okay";
+
+ max77843 at 66 {
+ compatible = "maxim,max77843";
+ interrupt-parent = <&gpa1>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x66>;
+
+ muic: max77843-muic {
+ compatible = "maxim,max77843-muic";
+ };
+
+ regulators {
+ compatible = "maxim,max77843-regulator";
+ safeout1_reg: SAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ safeout2_reg: SAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ charger_reg: CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <3150000>;
+ };
+ };
+
+ haptic: max77843-haptic {
+ compatible = "maxim,max77843-haptic";
+ haptic-supply = <&ldo38_reg>;
+ pwms = <&pwm 0 33670 0>;
+ pwm-names = "haptic";
+ };
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mshc_0 {
+ status = "okay";
+ num-slots = <1>;
+ non-removable;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-hs400-timing = <0 3>;
+ samsung,read-strobe-delay = <90>;
+ fifo-depth = <0x80>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
+ &sd0_bus8 &sd0_rdqs>;
+ bus-width = <8>;
+ assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
+ assigned-clock-rates = <800000000>;
+};
+
+&pinctrl_alive {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_alive>;
+
+ initial_alive: initial-state {
+ PIN(IN, gpa0-0, DOWN, LV1);
+ PIN(IN, gpa0-1, NONE, LV1);
+ PIN(IN, gpa0-2, DOWN, LV1);
+ PIN(IN, gpa0-3, NONE, LV1);
+ PIN(IN, gpa0-4, NONE, LV1);
+ PIN(IN, gpa0-5, DOWN, LV1);
+ PIN(IN, gpa0-6, NONE, LV1);
+ PIN(IN, gpa0-7, NONE, LV1);
+
+ PIN(IN, gpa1-0, UP, LV1);
+ PIN(IN, gpa1-1, NONE, LV1);
+ PIN(IN, gpa1-2, NONE, LV1);
+ PIN(IN, gpa1-3, DOWN, LV1);
+ PIN(IN, gpa1-4, DOWN, LV1);
+ PIN(IN, gpa1-5, NONE, LV1);
+ PIN(IN, gpa1-6, NONE, LV1);
+ PIN(IN, gpa1-7, NONE, LV1);
+
+ PIN(IN, gpa2-0, NONE, LV1);
+ PIN(IN, gpa2-1, NONE, LV1);
+ PIN(IN, gpa2-2, NONE, LV1);
+ PIN(IN, gpa2-3, DOWN, LV1);
+ PIN(IN, gpa2-4, NONE, LV1);
+ PIN(IN, gpa2-5, DOWN, LV1);
+ PIN(IN, gpa2-6, DOWN, LV1);
+ PIN(IN, gpa2-7, NONE, LV1);
+
+ PIN(IN, gpa3-0, DOWN, LV1);
+ PIN(IN, gpa3-1, DOWN, LV1);
+ PIN(IN, gpa3-2, NONE, LV1);
+ PIN(IN, gpa3-3, DOWN, LV1);
+ PIN(IN, gpa3-4, NONE, LV1);
+ PIN(IN, gpa3-5, DOWN, LV1);
+ PIN(IN, gpa3-6, DOWN, LV1);
+ PIN(IN, gpa3-7, DOWN, LV1);
+
+ PIN(IN, gpf1-0, NONE, LV1);
+ PIN(IN, gpf1-1, NONE, LV1);
+ PIN(IN, gpf1-2, DOWN, LV1);
+ PIN(IN, gpf1-4, UP, LV1);
+ PIN(OUT, gpf1-5, NONE, LV1);
+ PIN(IN, gpf1-6, DOWN, LV1);
+ PIN(IN, gpf1-7, DOWN, LV1);
+
+ PIN(IN, gpf2-0, DOWN, LV1);
+ PIN(IN, gpf2-1, DOWN, LV1);
+ PIN(IN, gpf2-2, DOWN, LV1);
+ PIN(IN, gpf2-3, DOWN, LV1);
+
+ PIN(IN, gpf3-0, DOWN, LV1);
+ PIN(IN, gpf3-1, DOWN, LV1);
+ PIN(IN, gpf3-2, NONE, LV1);
+ PIN(IN, gpf3-3, DOWN, LV1);
+
+ PIN(IN, gpf4-0, DOWN, LV1);
+ PIN(IN, gpf4-1, DOWN, LV1);
+ PIN(IN, gpf4-2, DOWN, LV1);
+ PIN(IN, gpf4-3, DOWN, LV1);
+ PIN(IN, gpf4-4, DOWN, LV1);
+ PIN(IN, gpf4-5, DOWN, LV1);
+ PIN(IN, gpf4-6, DOWN, LV1);
+ PIN(IN, gpf4-7, DOWN, LV1);
+
+ PIN(IN, gpf5-0, DOWN, LV1);
+ PIN(IN, gpf5-1, DOWN, LV1);
+ PIN(IN, gpf5-2, DOWN, LV1);
+ PIN(IN, gpf5-3, DOWN, LV1);
+ PIN(OUT, gpf5-4, NONE, LV1);
+ PIN(IN, gpf5-5, DOWN, LV1);
+ PIN(IN, gpf5-6, DOWN, LV1);
+ PIN(IN, gpf5-7, DOWN, LV1);
+ };
+
+ te_irq: te_irq {
+ samsung,pins = "gpf1-3";
+ samsung,pin-function = <0xf>;
+ };
+};
+
+&pinctrl_cpif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_cpif>;
+
+ initial_cpif: initial-state {
+ PIN(IN, gpv6-0, DOWN, LV1);
+ PIN(IN, gpv6-1, DOWN, LV1);
+ };
+};
+
+&pinctrl_ese {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_ese>;
+
+ initial_ese: initial-state {
+ PIN(IN, gpj2-0, DOWN, LV1);
+ PIN(IN, gpj2-1, DOWN, LV1);
+ PIN(IN, gpj2-2, DOWN, LV1);
+ };
+};
+
+&pinctrl_fsys {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_fsys>;
+
+ initial_fsys: initial-state {
+ PIN(IN, gpr3-0, NONE, LV1);
+ PIN(IN, gpr3-1, DOWN, LV1);
+ PIN(IN, gpr3-2, DOWN, LV1);
+ PIN(IN, gpr3-3, DOWN, LV1);
+ PIN(IN, gpr3-7, NONE, LV1);
+ };
+};
+
+&pinctrl_imem {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_imem>;
+
+ initial_imem: initial-state {
+ PIN(IN, gpf0-0, UP, LV1);
+ PIN(IN, gpf0-1, UP, LV1);
+ PIN(IN, gpf0-2, DOWN, LV1);
+ PIN(IN, gpf0-3, UP, LV1);
+ PIN(IN, gpf0-4, DOWN, LV1);
+ PIN(IN, gpf0-5, NONE, LV1);
+ PIN(IN, gpf0-6, DOWN, LV1);
+ PIN(IN, gpf0-7, UP, LV1);
+ };
+};
+
+&pinctrl_nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_nfc>;
+
+ initial_nfc: initial-state {
+ PIN(IN, gpj0-2, DOWN, LV1);
+ };
+};
+
+&pinctrl_peric {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_peric>;
+
+ initial_peric: initial-state {
+ PIN(IN, gpv7-0, DOWN, LV1);
+ PIN(IN, gpv7-1, DOWN, LV1);
+ PIN(IN, gpv7-2, NONE, LV1);
+ PIN(IN, gpv7-3, DOWN, LV1);
+ PIN(IN, gpv7-4, DOWN, LV1);
+ PIN(IN, gpv7-5, DOWN, LV1);
+
+ PIN(IN, gpb0-4, DOWN, LV1);
+
+ PIN(IN, gpc0-2, DOWN, LV1);
+ PIN(IN, gpc0-5, DOWN, LV1);
+ PIN(IN, gpc0-7, DOWN, LV1);
+
+ PIN(IN, gpc1-1, DOWN, LV1);
+
+ PIN(IN, gpc3-4, NONE, LV1);
+ PIN(IN, gpc3-5, NONE, LV1);
+ PIN(IN, gpc3-6, NONE, LV1);
+ PIN(IN, gpc3-7, NONE, LV1);
+
+ PIN(OUT, gpg0-0, NONE, LV1);
+ PIN(FUNC1, gpg0-1, DOWN, LV1);
+
+ PIN(IN, gpd2-5, DOWN, LV1);
+
+ PIN(IN, gpd4-0, NONE, LV1);
+ PIN(IN, gpd4-1, DOWN, LV1);
+ PIN(IN, gpd4-2, DOWN, LV1);
+ PIN(IN, gpd4-3, DOWN, LV1);
+ PIN(IN, gpd4-4, DOWN, LV1);
+
+ PIN(IN, gpd6-3, DOWN, LV1);
+
+ PIN(IN, gpd8-1, UP, LV1);
+
+ PIN(IN, gpg1-0, DOWN, LV1);
+ PIN(IN, gpg1-1, DOWN, LV1);
+ PIN(IN, gpg1-2, DOWN, LV1);
+ PIN(IN, gpg1-3, DOWN, LV1);
+ PIN(IN, gpg1-4, DOWN, LV1);
+
+ PIN(IN, gpg2-0, DOWN, LV1);
+ PIN(IN, gpg2-1, DOWN, LV1);
+
+ PIN(IN, gpg3-0, DOWN, LV1);
+ PIN(IN, gpg3-1, DOWN, LV1);
+ PIN(IN, gpg3-5, DOWN, LV1);
+ PIN(IN, gpg3-7, DOWN, LV1);
+ };
+};
+
+&pinctrl_touch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_touch>;
+
+ initial_touch: initial-state {
+ PIN(IN, gpj1-2, DOWN, LV1);
+ };
+};
+
+&pwm {
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&mic {
+ status = "okay";
+
+ i80-if-timings {
+ };
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&serial_3 {
+ assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
+ assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
+ status = "okay";
+};
+
+&spi_1 {
+ cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ wm5110: wm5110-codec at 0 {
+ compatible = "wlf,wm5110";
+ reg = <0x0>;
+ spi-max-frequency = <20000000>;
+ interrupt-parent = <&gpa0>;
+ interrupts = <4 IRQ_TYPE_NONE>;
+ clocks = <&pmu_system_controller 0>,
+ <&s2mps13_osc S2MPS11_CLK_BT>;
+ clock-names = "mclk1", "mclk2";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ wlf,micd-detect-debounce = <300>;
+ wlf,micd-bias-start-time = <0x1>;
+ wlf,micd-rate = <0x7>;
+ wlf,micd-dbtime = <0x1>;
+ wlf,micd-force-micbias;
+ wlf,micd-configs = <0x0 1 0>;
+ wlf,hpdet-channel = <1>;
+ wlf,gpsw = <0x1>;
+ wlf,inmode = <2 0 2 0>;
+
+ wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+ wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+ /* core supplies */
+ AVDD-supply = <&ldo18_reg>;
+ DBVDD1-supply = <&ldo18_reg>;
+ CPVDD-supply = <&ldo18_reg>;
+ DBVDD2-supply = <&ldo18_reg>;
+ DBVDD3-supply = <&ldo18_reg>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
+ };
+ };
+};
+
+&timer {
+ clock-frequency = <24000000>;
+};
+
+&tmu_atlas0 {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&tmu_apollo {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&tmu_g3d {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&usbdrd30 {
+ vdd33-supply = <&ldo10_reg>;
+ vdd10-supply = <&ldo6_reg>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "otg";
+};
+
+&usbdrd30_phy {
+ vbus-supply = <&safeout1_reg>;
+ status = "okay";
+};
+
+&xxti {
+ clock-frequency = <24000000>;
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v3 5/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board
2016-11-03 6:39 ` Chanwoo Choi
@ 2016-11-03 6:39 ` Chanwoo Choi
-1 siblings, 0 replies; 43+ messages in thread
From: Chanwoo Choi @ 2016-11-03 6:39 UTC (permalink / raw)
To: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel
Cc: cw00.choi, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, andi.shyti,
chanwoo
This patch adds the Device Tree source for Exynos5433-based Samsung TM2E
board. TM2E board is the most similar with TM2 board. The exynos5433-tm2e.dts
include the difference between TM2 and TM2E.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
.../bindings/arm/samsung/samsung-boards.txt | 1 +
arch/arm64/boot/dts/exynos/Makefile | 1 +
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 41 ++++++++++++++++++++++
3 files changed, 43 insertions(+)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 339af8b9cdc5..c64c7b515777 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -16,6 +16,7 @@ Required root node properties:
- "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
- "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
- "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
+ - "samsung,tm2e" - for Exynos5433-based Samsung TM2E board.
- "samsung,sd5v1" - for Exynos5440-based Samsung board.
- "samsung,ssdk5440" - for Exynos5440-based Samsung board.
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 947c750acba1..7ddea53769a7 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -1,5 +1,6 @@
dtb-$(CONFIG_ARCH_EXYNOS) += \
exynos5433-tm2.dtb \
+ exynos5433-tm2e.dtb \
exynos7-espresso.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
new file mode 100644
index 000000000000..1db4e7f363a9
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -0,0 +1,41 @@
+/*
+ * SAMSUNG Exynos5433 TM2E board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos5433-tm2.dts"
+
+/ {
+ model = "Samsung TM2E board";
+ compatible = "samsung,tm2e", "samsung,exynos5433";
+};
+
+&ldo23_reg {
+ regulator-name = "CAM_SEN_CORE_1.025V_AP";
+ regulator-max-microvolt = <1050000>;
+};
+
+&ldo25_reg {
+ regulator-name = "UNUSED_LDO25";
+ regulator-always-off;
+};
+
+&ldo31_reg {
+ regulator-name = "TSP_VDD_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&ldo38_reg {
+ regulator-name = "VCC_3.3V_MOTOR_AP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v3 5/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board
@ 2016-11-03 6:39 ` Chanwoo Choi
0 siblings, 0 replies; 43+ messages in thread
From: Chanwoo Choi @ 2016-11-03 6:39 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds the Device Tree source for Exynos5433-based Samsung TM2E
board. TM2E board is the most similar with TM2 board. The exynos5433-tm2e.dts
include the difference between TM2 and TM2E.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
.../bindings/arm/samsung/samsung-boards.txt | 1 +
arch/arm64/boot/dts/exynos/Makefile | 1 +
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 41 ++++++++++++++++++++++
3 files changed, 43 insertions(+)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 339af8b9cdc5..c64c7b515777 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -16,6 +16,7 @@ Required root node properties:
- "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
- "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
- "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
+ - "samsung,tm2e" - for Exynos5433-based Samsung TM2E board.
- "samsung,sd5v1" - for Exynos5440-based Samsung board.
- "samsung,ssdk5440" - for Exynos5440-based Samsung board.
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 947c750acba1..7ddea53769a7 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -1,5 +1,6 @@
dtb-$(CONFIG_ARCH_EXYNOS) += \
exynos5433-tm2.dtb \
+ exynos5433-tm2e.dtb \
exynos7-espresso.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
new file mode 100644
index 000000000000..1db4e7f363a9
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -0,0 +1,41 @@
+/*
+ * SAMSUNG Exynos5433 TM2E board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos5433-tm2.dts"
+
+/ {
+ model = "Samsung TM2E board";
+ compatible = "samsung,tm2e", "samsung,exynos5433";
+};
+
+&ldo23_reg {
+ regulator-name = "CAM_SEN_CORE_1.025V_AP";
+ regulator-max-microvolt = <1050000>;
+};
+
+&ldo25_reg {
+ regulator-name = "UNUSED_LDO25";
+ regulator-always-off;
+};
+
+&ldo31_reg {
+ regulator-name = "TSP_VDD_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&ldo38_reg {
+ regulator-name = "VCC_3.3V_MOTOR_AP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 43+ messages in thread
* Re: [PATCH v3 3/5] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC
2016-11-03 6:39 ` Chanwoo Choi
@ 2016-11-03 12:26 ` Andi Shyti
-1 siblings, 0 replies; 43+ messages in thread
From: Andi Shyti @ 2016-11-03 12:26 UTC (permalink / raw)
To: Chanwoo Choi
Cc: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, chanwoo
Hi Chanwoo,
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Andi
On Thu, Nov 03, 2016 at 03:39:07PM +0900, Chanwoo Choi wrote:
> This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on
> Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports
> PSCI (Power State Coordination Interface) v0.1.
>
> This patch includes following Device Tree node to support Exynos5433 SoC:
> 1. Octa cores for big.LITTLE architecture
> - Cortex-A53 LITTLE Quad-core
> - Cortex-A57 big Quad-core
> - Support PSCI v0.1
>
> 2. Clock controller node
> - CMU_TOP : clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
> - CMU_CPIF : clocks for LLI (Low Latency Interface)
> - CMU_MIF : clocks for DRAM Memory Controller
> - CMU_PERIC : clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS
> - CMU_PERIS : clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC
> - CMU_FSYS : clocks for USB/UFS/SDMMC/TSI/PDMA
> - CMU_G2D : clocks for G2D/MDMA
> - CMU_DISP : clocks for DECON/HDMI/DSIM/MIXER
> - CMU_AUD : clocks for Cortex-A5/BUS/AUDIO
> - CMU_BUS{0|1|2} : clocks for global data buses and global peripheral buses
> - CMU_G3D : clocks for 3D Graphics Engine
> - CMU_GSCL : clocks for GSCALER
> - CMU_APOLLO: clocks for Cortex-A53 Quad-core processor.
> - CMU_ATLAS : clocks for Cortex-A57 Quad-core processor,
> CoreSight and L2 cache controller.
> - CMU_MSCL : clocks for M2M (Memory to Memory) scaler and JPEG IPs.
> - CMU_MFC : clocks for MFC (Multi-Format Codec) IP.
> - CMU_HEVC : clocks for HEVC(High Efficiency Video Codec) decoder IP.
> - CMU_ISP : clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs.
> - CMU_CAM0 : clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs.
> - CMU_CAM1 : clocks for COrtex-A5/MIPI_CSIS2/FIMC_LITE_C/FIMC-FD IPs.
>
> 3. pinctrl node for GPIO
> - alive/aud/cpif/ese/finger/fsys/imem/nfc/peric/touch pad
>
> 4. Timer
> - ARM architecture timer (armv8-timer)
> - MCT (Multi Core Timer) timer
>
> 5. Interrupt controller (GIC-400)
>
> 6. BUS devices
> - HS-I2C (High-Speed I2C) device
> - SPI (Serial Peripheral Interface) device
>
> 7. Sound devices
> - I2S bus
> - LPASS (Low Power Audio Subsystem)
>
> 8. Power management devices
> - CPUFREQ for for Cortex-A53/A57
> - TMU (Thermal Management Unit) for Cortex-A53/A57, G3D, ISP
>
> 9. Display controller devices
> - DECON (Display and enhancement controller) for panel output
> - DSI (Display Serial Interface)
> - MIC (Mobile Image Compressor)
>
> 10. USB
> - USB 3.0 DRD (Dual Role Device) controller
> - USB 3.0 Host controller
>
> 11. Storage devices
> - MSHC (Mobile Storage Host Controller)
>
> 12. Misc devices
> - UART device
> - ADC (Analog Digital Converter)
> - PWM (Pulse Width Modulation)
> - ADMA (Advanced DMA) and PDMA (Peripheral DMA)
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 794 ++++++++++++
> .../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 23 +
> .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
> arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 296 +++++
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1356 ++++++++++++++++++++
> 5 files changed, 2491 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> new file mode 100644
> index 000000000000..796881310bf6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> @@ -0,0 +1,794 @@
> +/*
> + * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + * Chanwoo Choi <cw00.choi@samsung.com>
> + *
> + * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device
> + * tree nodes are listed in this file.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#define PIN_PULL_NONE 0
> +#define PIN_PULL_DOWN 1
> +#define PIN_PULL_UP 3
> +
> +#define PIN_DRV_LV1 0
> +#define PIN_DRV_LV2 2
> +#define PIN_DRV_LV3 1
> +#define PIN_DRV_LV4 3
> +
> +#define PIN_IN 0
> +#define PIN_OUT 1
> +#define PIN_FUNC1 2
> +
> +#define PIN(_func, _pin, _pull, _drv) \
> + _pin { \
> + samsung,pins = #_pin; \
> + samsung,pin-function = <PIN_ ##_func>; \
> + samsung,pin-pud = <PIN_PULL_ ##_pull>; \
> + samsung,pin-drv = <PIN_DRV_ ##_drv>; \
> + }
> +
> +&pinctrl_alive {
> + gpa0: gpa0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 0 0>, <GIC_SPI 1 0>, <GIC_SPI 2 0>,
> + <GIC_SPI 3 0>, <GIC_SPI 4 0>, <GIC_SPI 5 0>,
> + <GIC_SPI 6 0>, <GIC_SPI 7 0>;
> + #interrupt-cells = <2>;
> + };
> +
> + gpa1: gpa1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 8 0>, <GIC_SPI 9 0>, <GIC_SPI 10 0>,
> + <GIC_SPI 11 0>, <GIC_SPI 12 0>, <GIC_SPI 13 0>,
> + <GIC_SPI 14 0>, <GIC_SPI 15 0>;
> + #interrupt-cells = <2>;
> + };
> +
> + gpa2: gpa2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpa3: gpa3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf1: gpf1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf2: gpf2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf3: gpf3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf4: gpf4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf5: gpf5 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&pinctrl_aud {
> + gpz0: gpz0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpz1: gpz1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + i2s0_bus: i2s0-bus {
> + samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
> + "gpz0-4", "gpz0-5", "gpz0-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pcm0_bus: pcm0-bus {
> + samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart_aud_bus: uart-aud-bus {
> + samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&pinctrl_cpif {
> + gpv6: gpv6 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&pinctrl_ese {
> + gpj2: gpj2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&pinctrl_finger {
> + gpd5: gpd5 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + spi2_bus: spi2-bus {
> + samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c6_bus: hs-i2c6-bus {
> + samsung,pins = "gpd5-3", "gpd5-2";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&pinctrl_fsys {
> + gph1: gph1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpr4: gpr4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpr0: gpr0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpr1: gpr1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpr2: gpr2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpr3: gpr3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + sd0_clk: sd0-clk {
> + samsung,pins = "gpr0-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_cmd: sd0-cmd {
> + samsung,pins = "gpr0-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_rdqs: sd0-rdqs {
> + samsung,pins = "gpr0-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_qrdy: sd0-qrdy {
> + samsung,pins = "gpr0-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus1: sd0-bus-width1 {
> + samsung,pins = "gpr1-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus4: sd0-bus-width4 {
> + samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus8: sd0-bus-width8 {
> + samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_clk: sd1-clk {
> + samsung,pins = "gpr2-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_cmd: sd1-cmd {
> + samsung,pins = "gpr2-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_bus1: sd1-bus-width1 {
> + samsung,pins = "gpr3-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_bus4: sd1-bus-width4 {
> + samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_bus8: sd1-bus-width8 {
> + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + pcie_bus: pcie_bus {
> + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + };
> +
> + sd2_clk: sd2-clk {
> + samsung,pins = "gpr4-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_cmd: sd2-cmd {
> + samsung,pins = "gpr4-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_cd: sd2-cd {
> + samsung,pins = "gpr4-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_bus1: sd2-bus-width1 {
> + samsung,pins = "gpr4-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_bus4: sd2-bus-width4 {
> + samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_clk_output: sd2-clk-output {
> + samsung,pins = "gpr4-0";
> + samsung,pin-function = <1>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <2>;
> + };
> +
> + sd2_cmd_output: sd2-cmd-output {
> + samsung,pins = "gpr4-1";
> + samsung,pin-function = <1>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <2>;
> + };
> +};
> +
> +&pinctrl_imem {
> + gpf0: gpf0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&pinctrl_nfc {
> + gpj0: gpj0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + hs_i2c4_bus: hs-i2c4-bus {
> + samsung,pins = "gpj0-1", "gpj0-0";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&pinctrl_peric {
> + gpv7: gpv7 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb0: gpb0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc0: gpc0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc1: gpc1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc2: gpc2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc3: gpc3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg0: gpg0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd0: gpd0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd1: gpd1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd2: gpd2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd4: gpd4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd8: gpd8 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd6: gpd6 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd7: gpd7 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg1: gpg1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg2: gpg2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg3: gpg3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + hs_i2c8_bus: hs-i2c8-bus {
> + samsung,pins = "gpb0-1", "gpb0-0";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c9_bus: hs-i2c9-bus {
> + samsung,pins = "gpb0-3", "gpb0-2";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2s1_bus: i2s1-bus {
> + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
> + "gpd4-3", "gpd4-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pcm1_bus: pcm1-bus {
> + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
> + "gpd4-3", "gpd4-4";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spdif_bus: spdif-bus {
> + samsung,pins = "gpd4-3", "gpd4-4";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_spi_pin0: fimc-is-spi-pin0 {
> + samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_spi_pin1: fimc-is-spi-pin1 {
> + samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart0_bus: uart0-bus {
> + samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + };
> +
> + hs_i2c2_bus: hs-i2c2-bus {
> + samsung,pins = "gpd0-3", "gpd0-2";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart2_bus: uart2-bus {
> + samsung,pins = "gpd1-5", "gpd1-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + };
> +
> + uart1_bus: uart1-bus {
> + samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + };
> +
> + hs_i2c3_bus: hs-i2c3-bus {
> + samsung,pins = "gpd1-3", "gpd1-2";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c0_bus: hs-i2c0-bus {
> + samsung,pins = "gpd2-1", "gpd2-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c1_bus: hs-i2c1-bus {
> + samsung,pins = "gpd2-3", "gpd2-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pwm0_out: pwm0-out {
> + samsung,pins = "gpd2-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pwm1_out: pwm1-out {
> + samsung,pins = "gpd2-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pwm2_out: pwm2-out {
> + samsung,pins = "gpd2-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pwm3_out: pwm3-out {
> + samsung,pins = "gpd2-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi1_bus: spi1-bus {
> + samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c7_bus: hs-i2c7-bus {
> + samsung,pins = "gpd2-7", "gpd2-6";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi0_bus: spi0-bus {
> + samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c10_bus: hs-i2c10-bus {
> + samsung,pins = "gpg3-1", "gpg3-0";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c11_bus: hs-i2c11-bus {
> + samsung,pins = "gpg3-3", "gpg3-2";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi3_bus: spi3-bus {
> + samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi4_bus: spi4-bus {
> + samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_uart: fimc-is-uart {
> + samsung,pins = "gpc1-1", "gpc0-7";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_ch0_i2c: fimc-is-ch0_i2c {
> + samsung,pins = "gpc2-1", "gpc2-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_ch0_mclk: fimc-is-ch0_mclk {
> + samsung,pins = "gpd7-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_ch1_i2c: fimc-is-ch1-i2c {
> + samsung,pins = "gpc2-3", "gpc2-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_ch1_mclk: fimc-is-ch1-mclk {
> + samsung,pins = "gpd7-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_ch2_i2c: fimc-is-ch2-i2c {
> + samsung,pins = "gpc2-5", "gpc2-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_ch2_mclk: fimc-is-ch2-mclk {
> + samsung,pins = "gpd7-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&pinctrl_touch {
> + gpj1: gpj1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + hs_i2c5_bus: hs-i2c5-bus {
> + samsung,pins = "gpj1-1", "gpj1-0";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
> new file mode 100644
> index 000000000000..9be2978f1b9a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
> @@ -0,0 +1,23 @@
> +/*
> + * Device tree sources for Exynos5433 TMU sensor configuration
> + *
> + * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/thermal/thermal_exynos.h>
> +
> +#thermal-sensor-cells = <0>;
> +samsung,tmu_gain = <8>;
> +samsung,tmu_reference_voltage = <23>;
> +samsung,tmu_noise_cancel_mode = <4>;
> +samsung,tmu_efuse_value = <75>;
> +samsung,tmu_min_efuse_value = <40>;
> +samsung,tmu_max_efuse_value = <150>;
> +samsung,tmu_first_point_trim = <25>;
> +samsung,tmu_second_point_trim = <85>;
> +samsung,tmu_default_temp_offset = <50>;
> +samsung,tmu_mux_addr = <6>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> new file mode 100644
> index 000000000000..125fe58d77ce
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> @@ -0,0 +1,22 @@
> +/*
> + * Device tree sources for Exynos5433 TMU sensor configuration
> + *
> + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/thermal/thermal_exynos.h>
> +
> +#thermal-sensor-cells = <0>;
> +samsung,tmu_gain = <8>;
> +samsung,tmu_reference_voltage = <16>;
> +samsung,tmu_noise_cancel_mode = <4>;
> +samsung,tmu_efuse_value = <75>;
> +samsung,tmu_min_efuse_value = <40>;
> +samsung,tmu_max_efuse_value = <150>;
> +samsung,tmu_first_point_trim = <25>;
> +samsung,tmu_second_point_trim = <85>;
> +samsung,tmu_default_temp_offset = <50>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> new file mode 100644
> index 000000000000..ceaa05145b8a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> @@ -0,0 +1,296 @@
> +/*
> + * Device tree sources for Exynos5433 thermal zone
> + *
> + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> +thermal-zones {
> + atlas0_thermal: atlas0-thermal {
> + thermal-sensors = <&tmu_atlas0>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + atlas0_alert_0: atlas0-alert-0 {
> + temperature = <65000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas0_alert_1: atlas0-alert-1 {
> + temperature = <70000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas0_alert_2: atlas0-alert-2 {
> + temperature = <75000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas0_alert_3: atlas0-alert-3 {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas0_alert_4: atlas0-alert-4 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas0_alert_5: atlas0-alert-5 {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas0_alert_6: atlas0-alert-6 {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + /* Set maximum frequency as 1800MHz */
> + trip = <&atlas0_alert_0>;
> + cooling-device = <&cpu4 1 2>;
> + };
> + map1 {
> + /* Set maximum frequency as 1700MHz */
> + trip = <&atlas0_alert_1>;
> + cooling-device = <&cpu4 2 3>;
> + };
> + map2 {
> + /* Set maximum frequency as 1600MHz */
> + trip = <&atlas0_alert_2>;
> + cooling-device = <&cpu4 3 4>;
> + };
> + map3 {
> + /* Set maximum frequency as 1500MHz */
> + trip = <&atlas0_alert_3>;
> + cooling-device = <&cpu4 4 5>;
> + };
> + map4 {
> + /* Set maximum frequency as 1400MHz */
> + trip = <&atlas0_alert_4>;
> + cooling-device = <&cpu4 5 7>;
> + };
> + map5 {
> + /* Set maximum frequencyas 1200MHz */
> + trip = <&atlas0_alert_5>;
> + cooling-device = <&cpu4 7 9>;
> + };
> + map6 {
> + /* Set maximum frequency as 1000MHz */
> + trip = <&atlas0_alert_6>;
> + cooling-device = <&cpu4 9 14>;
> + };
> + };
> + };
> +
> + atlas1_thermal: atlas1-thermal {
> + thermal-sensors = <&tmu_atlas1>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + atlas1_alert_0: atlas1-alert-0 {
> + temperature = <65000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas1_alert_1: atlas1-alert-1 {
> + temperature = <70000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas1_alert_2: atlas1-alert-2 {
> + temperature = <75000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas1_alert_3: atlas1-alert-3 {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas1_alert_4: atlas1-alert-4 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas1_alert_5: atlas1-alert-5 {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas1_alert_6: atlas1-alert-6 {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + };
> + };
> +
> + g3d_thermal: g3d-thermal {
> + thermal-sensors = <&tmu_g3d>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + g3d_alert_0: g3d-alert-0 {
> + temperature = <70000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + g3d_alert_1: g3d-alert-1 {
> + temperature = <75000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + g3d_alert_2: g3d-alert-2 {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + g3d_alert_3: g3d-alert-3 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + g3d_alert_4: g3d-alert-4 {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + g3d_alert_5: g3d-alert-5 {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + g3d_alert_6: g3d-alert-6 {
> + temperature = <100000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + };
> + };
> +
> + apollo_thermal: apollo-thermal {
> + thermal-sensors = <&tmu_apollo>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + apollo_alert_0: apollo-alert-0 {
> + temperature = <65000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + apollo_alert_1: apollo-alert-1 {
> + temperature = <70000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + apollo_alert_2: apollo-alert-2 {
> + temperature = <75000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + apollo_alert_3: apollo-alert-3 {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + apollo_alert_4: apollo-alert-4 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + apollo_alert_5: apollo-alert-5 {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + apollo_alert_6: apollo-alert-6 {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + /* Set maximum frequency as 1200MHz */
> + trip = <&apollo_alert_2>;
> + cooling-device = <&cpu0 1 2>;
> + };
> + map1 {
> + /* Set maximum frequency as 1100MHz */
> + trip = <&apollo_alert_3>;
> + cooling-device = <&cpu0 2 3>;
> + };
> + map2 {
> + /* Set maximum frequency as 1000MHz */
> + trip = <&apollo_alert_4>;
> + cooling-device = <&cpu0 3 4>;
> + };
> + map3 {
> + /* Set maximum frequency as 900MHz */
> + trip = <&apollo_alert_5>;
> + cooling-device = <&cpu0 4 5>;
> + };
> + map4 {
> + /* Set maximum frequency as 800MHz */
> + trip = <&apollo_alert_6>;
> + cooling-device = <&cpu0 5 9>;
> + };
> + };
> + };
> +
> + isp_thermal: isp-thermal {
> + thermal-sensors = <&tmu_isp>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + isp_alert_0: isp-alert-0 {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + isp_alert_1: isp-alert-1 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + isp_alert_2: isp-alert-2 {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + isp_alert_3: isp-alert-3 {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + isp_alert_4: isp-alert-4 {
> + temperature = <100000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + isp_alert_5: isp-alert-5 {
> + temperature = <105000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + isp_alert_6: isp-alert-6 {
> + temperature = <110000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + };
> + };
> +};
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> new file mode 100644
> index 000000000000..1188630823a7
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -0,0 +1,1356 @@
> +/*
> + * Samsung's Exynos5433 SoC device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Samsung's Exynos5433 SoC device nodes are listed in this file.
> + * Exynos5433 based board files can include this file and provide
> + * values for board specific bindings.
> + *
> + * Note: This file does not include device nodes for all the controllers in
> + * Exynos5433 SoC. As device tree coverage for Exynos5433 increases,
> + * additional nodes can be added to this file.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/clock/exynos5433.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "samsung,exynos5433";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + interrupt-parent = <&gic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x100>;
> + clock-frequency = <1300000000>;
> + clocks = <&cmu_apollo CLK_SCLK_APOLLO>;
> + clock-names = "apolloclk";
> + operating-points-v2 = <&cluster_a53_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu1: cpu@101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x101>;
> + clock-frequency = <1300000000>;
> + operating-points-v2 = <&cluster_a53_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu2: cpu@102 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x102>;
> + clock-frequency = <1300000000>;
> + operating-points-v2 = <&cluster_a53_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu3: cpu@103 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x103>;
> + clock-frequency = <1300000000>;
> + operating-points-v2 = <&cluster_a53_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu4: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x0>;
> + clock-frequency = <1900000000>;
> + clocks = <&cmu_atlas CLK_SCLK_ATLAS>;
> + clock-names = "atlasclk";
> + operating-points-v2 = <&cluster_a57_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu5: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x1>;
> + clock-frequency = <1900000000>;
> + operating-points-v2 = <&cluster_a57_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu6: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x2>;
> + clock-frequency = <1900000000>;
> + operating-points-v2 = <&cluster_a57_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu7: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x3>;
> + clock-frequency = <1900000000>;
> + operating-points-v2 = <&cluster_a57_opp_table>;
> + #cooling-cells = <2>;
> + };
> + };
> +
> + cluster_a53_opp_table: opp_table0 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp@400000000 {
> + opp-hz = /bits/ 64 <400000000>;
> + opp-microvolt = <900000>;
> + };
> + opp@500000000 {
> + opp-hz = /bits/ 64 <500000000>;
> + opp-microvolt = <925000>;
> + };
> + opp@600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <950000>;
> + };
> + opp@700000000 {
> + opp-hz = /bits/ 64 <700000000>;
> + opp-microvolt = <975000>;
> + };
> + opp@800000000 {
> + opp-hz = /bits/ 64 <800000000>;
> + opp-microvolt = <1000000>;
> + };
> + opp@900000000 {
> + opp-hz = /bits/ 64 <900000000>;
> + opp-microvolt = <1050000>;
> + };
> + opp@1000000000 {
> + opp-hz = /bits/ 64 <1000000000>;
> + opp-microvolt = <1075000>;
> + };
> + opp@1100000000 {
> + opp-hz = /bits/ 64 <1100000000>;
> + opp-microvolt = <1112500>;
> + };
> + opp@1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <1112500>;
> + };
> + opp@1300000000 {
> + opp-hz = /bits/ 64 <1300000000>;
> + opp-microvolt = <1150000>;
> + };
> + };
> +
> + cluster_a57_opp_table: opp_table1 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp@500000000 {
> + opp-hz = /bits/ 64 <500000000>;
> + opp-microvolt = <900000>;
> + };
> + opp@600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <900000>;
> + };
> + opp@700000000 {
> + opp-hz = /bits/ 64 <700000000>;
> + opp-microvolt = <912500>;
> + };
> + opp@800000000 {
> + opp-hz = /bits/ 64 <800000000>;
> + opp-microvolt = <912500>;
> + };
> + opp@900000000 {
> + opp-hz = /bits/ 64 <900000000>;
> + opp-microvolt = <937500>;
> + };
> + opp@1000000000 {
> + opp-hz = /bits/ 64 <1000000000>;
> + opp-microvolt = <975000>;
> + };
> + opp@1100000000 {
> + opp-hz = /bits/ 64 <1100000000>;
> + opp-microvolt = <1012500>;
> + };
> + opp@1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <1037500>;
> + };
> + opp@1300000000 {
> + opp-hz = /bits/ 64 <1300000000>;
> + opp-microvolt = <1062500>;
> + };
> + opp@1400000000 {
> + opp-hz = /bits/ 64 <1400000000>;
> + opp-microvolt = <1087500>;
> + };
> + opp@1500000000 {
> + opp-hz = /bits/ 64 <1500000000>;
> + opp-microvolt = <1125000>;
> + };
> + opp@1600000000 {
> + opp-hz = /bits/ 64 <1600000000>;
> + opp-microvolt = <1137500>;
> + };
> + opp@1700000000 {
> + opp-hz = /bits/ 64 <1700000000>;
> + opp-microvolt = <1175000>;
> + };
> + opp@1800000000 {
> + opp-hz = /bits/ 64 <1800000000>;
> + opp-microvolt = <1212500>;
> + };
> + opp@1900000000 {
> + opp-hz = /bits/ 64 <1900000000>;
> + opp-microvolt = <1262500>;
> + };
> + };
> +
> + psci {
> + compatible = "arm,psci";
> + method = "smc";
> + cpu_off = <0x84000002>;
> + cpu_on = <0xC4000003>;
> + };
> +
> + reboot: syscon-reboot {
> + compatible = "syscon-reboot";
> + regmap = <&pmu_system_controller>;
> + offset = <0x400>; /* SWRESET */
> + mask = <0x1>;
> + };
> +
> + soc: soc {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x0 0x18000000>;
> +
> + chipid@10000000 {
> + compatible = "samsung,exynos4210-chipid";
> + reg = <0x10000000 0x100>;
> + };
> +
> + xxti: xxti {
> + compatible = "fixed-clock";
> + clock-output-names = "oscclk";
> + #clock-cells = <0>;
> + };
> +
> + cmu_top: clock-controller@10030000 {
> + compatible = "samsung,exynos5433-cmu-top";
> + reg = <0x10030000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "sclk_mphy_pll",
> + "sclk_mfc_pll",
> + "sclk_bus_pll";
> + clocks = <&xxti>,
> + <&cmu_cpif CLK_SCLK_MPHY_PLL>,
> + <&cmu_mif CLK_SCLK_MFC_PLL>,
> + <&cmu_mif CLK_SCLK_BUS_PLL>;
> + };
> +
> + cmu_cpif: clock-controller@10fc0000 {
> + compatible = "samsung,exynos5433-cmu-cpif";
> + reg = <0x10fc0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk";
> + clocks = <&xxti>;
> + };
> +
> + cmu_mif: clock-controller@105b0000 {
> + compatible = "samsung,exynos5433-cmu-mif";
> + reg = <0x105b0000 0x2000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "sclk_mphy_pll";
> + clocks = <&xxti>,
> + <&cmu_cpif CLK_SCLK_MPHY_PLL>;
> + };
> +
> + cmu_peric: clock-controller@14c80000 {
> + compatible = "samsung,exynos5433-cmu-peric";
> + reg = <0x14c80000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + cmu_peris: clock-controller@0x10040000 {
> + compatible = "samsung,exynos5433-cmu-peris";
> + reg = <0x10040000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + cmu_fsys: clock-controller@156e0000 {
> + compatible = "samsung,exynos5433-cmu-fsys";
> + reg = <0x156e0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "sclk_ufs_mphy",
> + "div_aclk_fsys_200",
> + "sclk_pcie_100_fsys",
> + "sclk_ufsunipro_fsys",
> + "sclk_mmc2_fsys",
> + "sclk_mmc1_fsys",
> + "sclk_mmc0_fsys",
> + "sclk_usbhost30_fsys",
> + "sclk_usbdrd30_fsys";
> + clocks = <&xxti>,
> + <&cmu_cpif CLK_SCLK_UFS_MPHY>,
> + <&cmu_top CLK_DIV_ACLK_FSYS_200>,
> + <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
> + <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
> + <&cmu_top CLK_SCLK_MMC2_FSYS>,
> + <&cmu_top CLK_SCLK_MMC1_FSYS>,
> + <&cmu_top CLK_SCLK_MMC0_FSYS>,
> + <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
> + <&cmu_top CLK_SCLK_USBDRD30_FSYS>;
> + };
> +
> + cmu_g2d: clock-controller@12460000 {
> + compatible = "samsung,exynos5433-cmu-g2d";
> + reg = <0x12460000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "aclk_g2d_266",
> + "aclk_g2d_400";
> + clocks = <&xxti>,
> + <&cmu_top CLK_ACLK_G2D_266>,
> + <&cmu_top CLK_ACLK_G2D_400>;
> + };
> +
> + cmu_disp: clock-controller@13b90000 {
> + compatible = "samsung,exynos5433-cmu-disp";
> + reg = <0x13b90000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "sclk_dsim1_disp",
> + "sclk_dsim0_disp",
> + "sclk_dsd_disp",
> + "sclk_decon_tv_eclk_disp",
> + "sclk_decon_vclk_disp",
> + "sclk_decon_eclk_disp",
> + "sclk_decon_tv_vclk_disp",
> + "aclk_disp_333";
> + clocks = <&xxti>,
> + <&cmu_mif CLK_SCLK_DSIM1_DISP>,
> + <&cmu_mif CLK_SCLK_DSIM0_DISP>,
> + <&cmu_mif CLK_SCLK_DSD_DISP>,
> + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
> + <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
> + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
> + <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
> + <&cmu_mif CLK_ACLK_DISP_333>;
> + };
> +
> + cmu_aud: clock-controller@114c0000 {
> + compatible = "samsung,exynos5433-cmu-aud";
> + reg = <0x114c0000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + cmu_bus0: clock-controller@13600000 {
> + compatible = "samsung,exynos5433-cmu-bus0";
> + reg = <0x13600000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "aclk_bus0_400";
> + clocks = <&cmu_top CLK_ACLK_BUS0_400>;
> + };
> +
> + cmu_bus1: clock-controller@14800000 {
> + compatible = "samsung,exynos5433-cmu-bus1";
> + reg = <0x14800000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "aclk_bus1_400";
> + clocks = <&cmu_top CLK_ACLK_BUS1_400>;
> + };
> +
> + cmu_bus2: clock-controller@13400000 {
> + compatible = "samsung,exynos5433-cmu-bus2";
> + reg = <0x13400000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk", "aclk_bus2_400";
> + clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
> + };
> +
> + cmu_g3d: clock-controller@14aa0000 {
> + compatible = "samsung,exynos5433-cmu-g3d";
> + reg = <0x14aa0000 0x2000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk", "aclk_g3d_400";
> + clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
> + };
> +
> + cmu_gscl: clock-controller@13cf0000 {
> + compatible = "samsung,exynos5433-cmu-gscl";
> + reg = <0x13cf0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "aclk_gscl_111",
> + "aclk_gscl_333";
> + clocks = <&xxti>,
> + <&cmu_top CLK_ACLK_GSCL_111>,
> + <&cmu_top CLK_ACLK_GSCL_333>;
> + };
> +
> + cmu_apollo: clock-controller@11900000 {
> + compatible = "samsung,exynos5433-cmu-apollo";
> + reg = <0x11900000 0x2000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk", "sclk_bus_pll_apollo";
> + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
> + };
> +
> + cmu_atlas: clock-controller@11800000 {
> + compatible = "samsung,exynos5433-cmu-atlas";
> + reg = <0x11800000 0x2000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk", "sclk_bus_pll_atlas";
> + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
> + };
> +
> + cmu_mscl: clock-controller@105d0000 {
> + compatible = "samsung,exynos5433-cmu-mscl";
> + reg = <0x150d0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "sclk_jpeg_mscl",
> + "aclk_mscl_400";
> + clocks = <&xxti>,
> + <&cmu_top CLK_SCLK_JPEG_MSCL>,
> + <&cmu_top CLK_ACLK_MSCL_400>;
> + };
> +
> + cmu_mfc: clock-controller@15280000 {
> + compatible = "samsung,exynos5433-cmu-mfc";
> + reg = <0x15280000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk", "aclk_mfc_400";
> + clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
> + };
> +
> + cmu_hevc: clock-controller@14f80000 {
> + compatible = "samsung,exynos5433-cmu-hevc";
> + reg = <0x14f80000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk", "aclk_hevc_400";
> + clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
> + };
> +
> + cmu_isp: clock-controller@146d0000 {
> + compatible = "samsung,exynos5433-cmu-isp";
> + reg = <0x146d0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "aclk_isp_dis_400",
> + "aclk_isp_400";
> + clocks = <&xxti>,
> + <&cmu_top CLK_ACLK_ISP_DIS_400>,
> + <&cmu_top CLK_ACLK_ISP_400>;
> + };
> +
> + cmu_cam0: clock-controller@120d0000 {
> + compatible = "samsung,exynos5433-cmu-cam0";
> + reg = <0x120d0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "aclk_cam0_333",
> + "aclk_cam0_400",
> + "aclk_cam0_552";
> + clocks = <&xxti>,
> + <&cmu_top CLK_ACLK_CAM0_333>,
> + <&cmu_top CLK_ACLK_CAM0_400>,
> + <&cmu_top CLK_ACLK_CAM0_552>;
> + };
> +
> + cmu_cam1: clock-controller@145d0000 {
> + compatible = "samsung,exynos5433-cmu-cam1";
> + reg = <0x145d0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "sclk_isp_uart_cam1",
> + "sclk_isp_spi1_cam1",
> + "sclk_isp_spi0_cam1",
> + "aclk_cam1_333",
> + "aclk_cam1_400",
> + "aclk_cam1_552";
> + clocks = <&xxti>,
> + <&cmu_top CLK_SCLK_ISP_UART_CAM1>,
> + <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
> + <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
> + <&cmu_top CLK_ACLK_CAM1_333>,
> + <&cmu_top CLK_ACLK_CAM1_400>,
> + <&cmu_top CLK_ACLK_CAM1_552>;
> + };
> +
> + tmu_atlas0: tmu@10060000 {
> + compatible = "samsung,exynos5433-tmu";
> + reg = <0x10060000 0x200>;
> + interrupts = <GIC_SPI 95 0>;
> + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
> + <&cmu_peris CLK_SCLK_TMU0>;
> + clock-names = "tmu_apbif", "tmu_sclk";
> + #include "exynos5433-tmu-sensor-conf.dtsi"
> + status = "disabled";
> + };
> +
> + tmu_atlas1: tmu@10068000 {
> + compatible = "samsung,exynos5433-tmu";
> + reg = <0x10068000 0x200>;
> + interrupts = <GIC_SPI 96 0>;
> + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
> + <&cmu_peris CLK_SCLK_TMU0>;
> + clock-names = "tmu_apbif", "tmu_sclk";
> + #include "exynos5433-tmu-sensor-conf.dtsi"
> + status = "disabled";
> + };
> +
> + tmu_g3d: tmu@10070000 {
> + compatible = "samsung,exynos5433-tmu";
> + reg = <0x10070000 0x200>;
> + interrupts = <GIC_SPI 99 0>;
> + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
> + <&cmu_peris CLK_SCLK_TMU1>;
> + clock-names = "tmu_apbif", "tmu_sclk";
> + #include "exynos5433-tmu-g3d-sensor-conf.dtsi"
> + status = "disabled";
> + };
> +
> + tmu_apollo: tmu@10078000 {
> + compatible = "samsung,exynos5433-tmu";
> + reg = <0x10078000 0x200>;
> + interrupts = <GIC_SPI 115 0>;
> + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
> + <&cmu_peris CLK_SCLK_TMU1>;
> + clock-names = "tmu_apbif", "tmu_sclk";
> + #include "exynos5433-tmu-sensor-conf.dtsi"
> + status = "disabled";
> + };
> +
> + tmu_isp: tmu@1007c000 {
> + compatible = "samsung,exynos5433-tmu";
> + reg = <0x1007c000 0x200>;
> + interrupts = <GIC_SPI 94 0>;
> + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
> + <&cmu_peris CLK_SCLK_TMU1>;
> + clock-names = "tmu_apbif", "tmu_sclk";
> + #include "exynos5433-tmu-sensor-conf.dtsi"
> + status = "disabled";
> + };
> +
> + mct@101c0000 {
> + compatible = "samsung,exynos4210-mct";
> + reg = <0x101c0000 0x800>;
> + interrupts = <GIC_SPI 102 0>, <GIC_SPI 103 0>,
> + <GIC_SPI 104 0>, <GIC_SPI 105 0>,
> + <GIC_SPI 106 0>, <GIC_SPI 107 0>,
> + <GIC_SPI 108 0>, <GIC_SPI 109 0>,
> + <GIC_SPI 110 0>, <GIC_SPI 111 0>,
> + <GIC_SPI 112 0>, <GIC_SPI 113 0>;
> + clocks = <&xxti>, <&cmu_peris CLK_PCLK_MCT>;
> + clock-names = "fin_pll", "mct";
> + };
> +
> + pinctrl_alive: pinctrl@10580000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
> +
> + wakeup-interrupt-controller {
> + compatible = "samsung,exynos7-wakeup-eint";
> + interrupts = <GIC_SPI 16 0>;
> + };
> + };
> +
> + pinctrl_aud: pinctrl@114b0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x114b0000 0x1000>;
> + interrupts = <GIC_SPI 68 0>;
> + };
> +
> + pinctrl_cpif: pinctrl@10fe0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x10fe0000 0x1000>;
> + interrupts = <GIC_SPI 179 0>;
> + };
> +
> + pinctrl_ese: pinctrl@14ca0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x14ca0000 0x1000>;
> + interrupts = <GIC_SPI 413 0>;
> + };
> +
> + pinctrl_finger: pinctrl@14cb0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x14cb0000 0x1000>;
> + interrupts = <GIC_SPI 414 0>;
> + };
> +
> + pinctrl_fsys: pinctrl@15690000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x15690000 0x1000>;
> + interrupts = <GIC_SPI 229 0>;
> + };
> +
> + pinctrl_imem: pinctrl@11090000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x11090000 0x1000>;
> + interrupts = <GIC_SPI 325 0>;
> + };
> +
> + pinctrl_nfc: pinctrl@14cd0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x14cd0000 0x1000>;
> + interrupts = <GIC_SPI 441 0>;
> + };
> +
> + pinctrl_peric: pinctrl@14cc0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x14cc0000 0x1100>;
> + interrupts = <GIC_SPI 440 0>;
> + };
> +
> + pinctrl_touch: pinctrl@14ce0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x14ce0000 0x1100>;
> + interrupts = <GIC_SPI 442 0>;
> + };
> +
> + pmu_system_controller: system-controller@105c0000 {
> + compatible = "samsung,exynos5433-pmu", "syscon";
> + reg = <0x105c0000 0x5008>;
> + #clock-cells = <1>;
> + clock-names = "clkout16";
> + clocks = <&xxti>;
> + };
> +
> + gic: interrupt-controller@11001000 {
> + compatible = "arm,gic-400";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x11001000 0x1000>,
> + <0x11002000 0x2000>,
> + <0x11004000 0x2000>,
> + <0x11006000 0x2000>;
> + interrupts = <GIC_PPI 9 0xf04>;
> + };
> +
> + mipi_phy: video-phy@105c0710 {
> + compatible = "samsung,exynos5433-mipi-video-phy";
> + #phy-cells = <1>;
> + samsung,pmu-syscon = <&pmu_system_controller>;
> + samsung,cam0-sysreg = <&syscon_cam0>;
> + samsung,cam1-sysreg = <&syscon_cam1>;
> + samsung,disp-sysreg = <&syscon_disp>;
> + };
> +
> + decon: decon@13800000 {
> + compatible = "samsung,exynos5433-decon";
> + reg = <0x13800000 0x2104>;
> + clocks = <&cmu_disp CLK_PCLK_DECON>,
> + <&cmu_disp CLK_ACLK_DECON>,
> + <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
> + <&cmu_disp CLK_ACLK_XIU_DECON0X>,
> + <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
> + <&cmu_disp CLK_SCLK_DECON_VCLK>,
> + <&cmu_disp CLK_SCLK_DECON_ECLK>;
> + clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
> + "aclk_xiu_decon0x", "pclk_smmu_decon0x",
> + "sclk_decon_vclk", "sclk_decon_eclk";
> + interrupt-names = "fifo", "vsync", "lcd_sys";
> + interrupts = <GIC_SPI 201 0>, <GIC_SPI 202 0>,
> + <GIC_SPI 203 0>;
> + samsung,disp-sysreg = <&syscon_disp>;
> + status = "disabled";
> + iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
> + iommu-names = "m0", "m1";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + decon_to_mic: endpoint {
> + remote-endpoint =
> + <&mic_to_decon>;
> + };
> + };
> + };
> + };
> +
> + dsi: dsi@13900000 {
> + compatible = "samsung,exynos5433-mipi-dsi";
> + reg = <0x13900000 0xC0>;
> + interrupts = <GIC_SPI 205 0>;
> + phys = <&mipi_phy 1>;
> + phy-names = "dsim";
> + clocks = <&cmu_disp CLK_PCLK_DSIM0>,
> + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
> + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
> + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
> + <&cmu_disp CLK_SCLK_DSIM0>;
> + clock-names = "bus_clk",
> + "phyclk_mipidphy0_bitclkdiv8",
> + "phyclk_mipidphy0_rxclkesc0",
> + "sclk_rgb_vclk_to_dsim0",
> + "sclk_mipi";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dsi_to_mic: endpoint {
> + remote-endpoint = <&mic_to_dsi>;
> + };
> + };
> + };
> + };
> +
> + mic: mic@13930000 {
> + compatible = "samsung,exynos5433-mic";
> + reg = <0x13930000 0x48>;
> + clocks = <&cmu_disp CLK_PCLK_MIC0>,
> + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
> + clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
> + samsung,disp-syscon = <&syscon_disp>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + mic_to_decon: endpoint {
> + remote-endpoint =
> + <&decon_to_mic>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + mic_to_dsi: endpoint {
> + remote-endpoint = <&dsi_to_mic>;
> + };
> + };
> + };
> + };
> +
> + syscon_disp: syscon@13b80000 {
> + compatible = "syscon";
> + reg = <0x13b80000 0x1010>;
> + };
> +
> + syscon_cam0: syscon@120f0000 {
> + compatible = "syscon";
> + reg = <0x120f0000 0x1020>;
> + };
> +
> + syscon_cam1: syscon@145f0000 {
> + compatible = "syscon";
> + reg = <0x145f0000 0x1038>;
> + };
> +
> + sysmmu_decon0x: sysmmu@0x13a00000 {
> + compatible = "samsung,exynos-sysmmu";
> + reg = <0x13a00000 0x1000>;
> + interrupts = <GIC_SPI 192 0>;
> + clock-names = "pclk", "aclk";
> + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
> + <&cmu_disp CLK_ACLK_SMMU_DECON0X>;
> + #iommu-cells = <0>;
> + };
> +
> + sysmmu_decon1x: sysmmu@0x13a10000 {
> + compatible = "samsung,exynos-sysmmu";
> + reg = <0x13a10000 0x1000>;
> + interrupts = <GIC_SPI 194 0>;
> + clock-names = "pclk", "aclk";
> + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
> + <&cmu_disp CLK_ACLK_SMMU_DECON1X>;
> + #iommu-cells = <0>;
> + };
> +
> + serial_0: serial@14c10000 {
> + compatible = "samsung,exynos5433-uart";
> + reg = <0x14c10000 0x100>;
> + interrupts = <GIC_SPI 421 0>;
> + clocks = <&cmu_peric CLK_PCLK_UART0>,
> + <&cmu_peric CLK_SCLK_UART0>;
> + clock-names = "uart", "clk_uart_baud0";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_bus>;
> + status = "disabled";
> + };
> +
> + serial_1: serial@14c20000 {
> + compatible = "samsung,exynos5433-uart";
> + reg = <0x14c20000 0x100>;
> + interrupts = <GIC_SPI 422 0>;
> + clocks = <&cmu_peric CLK_PCLK_UART1>,
> + <&cmu_peric CLK_SCLK_UART1>;
> + clock-names = "uart", "clk_uart_baud0";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_bus>;
> + status = "disabled";
> + };
> +
> + serial_2: serial@14c30000 {
> + compatible = "samsung,exynos5433-uart";
> + reg = <0x14c30000 0x100>;
> + interrupts = <GIC_SPI 423 0>;
> + clocks = <&cmu_peric CLK_PCLK_UART2>,
> + <&cmu_peric CLK_SCLK_UART2>;
> + clock-names = "uart", "clk_uart_baud0";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart2_bus>;
> + status = "disabled";
> + };
> +
> + spi_0: spi@14d20000 {
> + compatible = "samsung,exynos5433-spi";
> + reg = <0x14d20000 0x100>;
> + interrupts = <GIC_SPI 432 0>;
> + dmas = <&pdma0 9>, <&pdma0 8>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cmu_peric CLK_PCLK_SPI0>,
> + <&cmu_peric CLK_SCLK_SPI0>,
> + <&cmu_peric CLK_SCLK_IOCLK_SPI0>;
> + clock-names = "spi", "spi_busclk0", "spi_ioclk";
> + samsung,spi-src-clk = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi0_bus>;
> + num-cs = <1>;
> + status = "disabled";
> + };
> +
> + spi_1: spi@14d30000 {
> + compatible = "samsung,exynos5433-spi";
> + reg = <0x14d30000 0x100>;
> + interrupts = <GIC_SPI 433 0>;
> + dmas = <&pdma0 11>, <&pdma0 10>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cmu_peric CLK_PCLK_SPI1>,
> + <&cmu_peric CLK_SCLK_SPI1>,
> + <&cmu_peric CLK_SCLK_IOCLK_SPI1>;
> + clock-names = "spi", "spi_busclk0", "spi_ioclk";
> + samsung,spi-src-clk = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi1_bus>;
> + num-cs = <1>;
> + status = "disabled";
> + };
> +
> + spi_2: spi@14d40000 {
> + compatible = "samsung,exynos5433-spi";
> + reg = <0x14d40000 0x100>;
> + interrupts = <GIC_SPI 434 0>;
> + dmas = <&pdma0 13>, <&pdma0 12>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cmu_peric CLK_PCLK_SPI2>,
> + <&cmu_peric CLK_SCLK_SPI2>,
> + <&cmu_peric CLK_SCLK_IOCLK_SPI2>;
> + clock-names = "spi", "spi_busclk0", "spi_ioclk";
> + samsung,spi-src-clk = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi2_bus>;
> + num-cs = <1>;
> + status = "disabled";
> + };
> +
> + spi_3: spi@14d50000 {
> + compatible = "samsung,exynos5433-spi";
> + reg = <0x14d50000 0x100>;
> + interrupts = <GIC_SPI 447 0>;
> + dmas = <&pdma0 23>, <&pdma0 22>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cmu_peric CLK_PCLK_SPI3>,
> + <&cmu_peric CLK_SCLK_SPI3>,
> + <&cmu_peric CLK_SCLK_IOCLK_SPI3>;
> + clock-names = "spi", "spi_busclk0", "spi_ioclk";
> + samsung,spi-src-clk = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi3_bus>;
> + num-cs = <1>;
> + status = "disabled";
> + };
> +
> + spi_4: spi@14d00000 {
> + compatible = "samsung,exynos5433-spi";
> + reg = <0x14d00000 0x100>;
> + interrupts = <GIC_SPI 412 0>;
> + dmas = <&pdma0 25>, <&pdma0 24>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cmu_peric CLK_PCLK_SPI4>,
> + <&cmu_peric CLK_SCLK_SPI4>,
> + <&cmu_peric CLK_SCLK_IOCLK_SPI4>;
> + clock-names = "spi", "spi_busclk0", "spi_ioclk";
> + samsung,spi-src-clk = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi4_bus>;
> + num-cs = <1>;
> + status = "disabled";
> + };
> +
> + adc: adc@14d10000 {
> + compatible = "samsung,exynos7-adc";
> + reg = <0x14d10000 0x100>;
> + interrupts = <GIC_SPI 438 0>;
> + clock-names = "adc";
> + clocks = <&cmu_peric CLK_PCLK_ADCIF>;
> + #io-channel-cells = <1>;
> + io-channel-ranges;
> + status = "disabled";
> + };
> +
> + pwm: pwm@14dd0000 {
> + compatible = "samsung,exynos4210-pwm";
> + reg = <0x14dd0000 0x100>;
> + interrupts = <GIC_SPI 416 0>, <GIC_SPI 417 0>,
> + <GIC_SPI 418 0>, <GIC_SPI 419 0>,
> + <GIC_SPI 420 0>;
> + samsung,pwm-outputs = <0>, <1>, <2>, <3>;
> + clocks = <&cmu_peric CLK_PCLK_PWM>;
> + clock-names = "timers";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + hsi2c_0: hsi2c@14e40000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14e40000 0x1000>;
> + interrupts = <GIC_SPI 428 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c0_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C0>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_1: hsi2c@14e50000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14e50000 0x1000>;
> + interrupts = <GIC_SPI 429 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c1_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C1>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_2: hsi2c@14e60000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14e60000 0x1000>;
> + interrupts = <GIC_SPI 430 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c2_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C2>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_3: hsi2c@14e70000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14e70000 0x1000>;
> + interrupts = <GIC_SPI 431 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c3_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C3>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_4: hsi2c@14ec0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14ec0000 0x1000>;
> + interrupts = <GIC_SPI 424 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c4_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C4>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_5: hsi2c@14ed0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14ed0000 0x1000>;
> + interrupts = <GIC_SPI 425 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c5_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C5>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_6: hsi2c@14ee0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14ee0000 0x1000>;
> + interrupts = <GIC_SPI 426 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c6_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C6>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_7: hsi2c@14ef0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14ef0000 0x1000>;
> + interrupts = <GIC_SPI 427 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c7_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C7>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_8: hsi2c@14d90000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14d90000 0x1000>;
> + interrupts = <GIC_SPI 443 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c8_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C8>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_9: hsi2c@14da0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14da0000 0x1000>;
> + interrupts = <GIC_SPI 444 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c9_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C9>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_10: hsi2c@14de0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14de0000 0x1000>;
> + interrupts = <GIC_SPI 445 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c10_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C10>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_11: hsi2c@14df0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14df0000 0x1000>;
> + interrupts = <GIC_SPI 446 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c11_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C11>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + usbdrd30: usb@15400000 {
> + compatible = "samsung,exynos5250-dwusb3";
> + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
> + <&cmu_fsys CLK_SCLK_USBDRD30>;
> + clock-names = "usbdrd30", "usbdrd30_susp_clk";
> + assigned-clocks =
> + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
> + <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
> + <&cmu_top CLK_DIV_SCLK_USBDRD30>;
> + assigned-clock-parents =
> + <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
> + <&cmu_top CLK_MOUT_BUS_PLL_USER>;
> + assigned-clock-rates = <0>, <0>, <66700000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + status = "disabled";
> +
> + dwc3@15400000 {
> + compatible = "snps,dwc3";
> + reg = <0x15400000 0x10000>;
> + interrupts = <GIC_SPI 231 0>;
> + phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
> + phy-names = "usb2-phy", "usb3-phy";
> + };
> + };
> +
> + usbdrd30_phy: phy@15500000 {
> + compatible = "samsung,exynos5433-usbdrd-phy";
> + reg = <0x15500000 0x100>;
> + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>,
> + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
> + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>,
> + <&cmu_fsys CLK_SCLK_USBDRD30>;
> + clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
> + "itp";
> + assigned-clocks =
> + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
> + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>;
> + assigned-clock-parents =
> + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
> + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>;
> + #phy-cells = <1>;
> + samsung,pmu-syscon = <&pmu_system_controller>;
> + status = "disabled";
> + };
> +
> + usbhost30_phy: phy@15580000 {
> + compatible = "samsung,exynos5433-usbdrd-phy";
> + reg = <0x15580000 0x100>;
> + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>,
> + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
> + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>,
> + <&cmu_fsys CLK_SCLK_USBHOST30>;
> + clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
> + "itp";
> + assigned-clocks =
> + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
> + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>;
> + assigned-clock-parents =
> + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
> + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
> + #phy-cells = <1>;
> + samsung,pmu-syscon = <&pmu_system_controller>;
> + status = "disabled";
> + };
> +
> + usbhost30: usb@15a00000 {
> + compatible = "samsung,exynos5250-dwusb3";
> + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
> + <&cmu_fsys CLK_SCLK_USBHOST30>;
> + clock-names = "usbdrd30", "usbdrd30_susp_clk";
> + assigned-clocks =
> + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
> + <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
> + <&cmu_top CLK_DIV_SCLK_USBHOST30>;
> + assigned-clock-parents =
> + <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
> + <&cmu_top CLK_MOUT_BUS_PLL_USER>;
> + assigned-clock-rates = <0>, <0>, <66700000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + status = "disabled";
> +
> + usbdrd_dwc3_0: dwc3@15a00000 {
> + compatible = "snps,dwc3";
> + reg = <0x15a00000 0x10000>;
> + interrupts = <GIC_SPI 244 0>;
> + phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
> + phy-names = "usb2-phy", "usb3-phy";
> + };
> + };
> +
> + mshc_0: mshc@15540000 {
> + compatible = "samsung,exynos7-dw-mshc-smu";
> + interrupts = <GIC_SPI 225 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x15540000 0x2000>;
> + clocks = <&cmu_fsys CLK_ACLK_MMC0>,
> + <&cmu_fsys CLK_SCLK_MMC0>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <0x40>;
> + status = "disabled";
> + };
> +
> + mshc_1: mshc@15550000 {
> + compatible = "samsung,exynos7-dw-mshc-smu";
> + interrupts = <GIC_SPI 226 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x15550000 0x2000>;
> + clocks = <&cmu_fsys CLK_ACLK_MMC1>,
> + <&cmu_fsys CLK_SCLK_MMC1>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <0x40>;
> + status = "disabled";
> + };
> +
> + mshc_2: mshc@15560000 {
> + compatible = "samsung,exynos7-dw-mshc-smu";
> + interrupts = <GIC_SPI 227 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x15560000 0x2000>;
> + clocks = <&cmu_fsys CLK_ACLK_MMC2>,
> + <&cmu_fsys CLK_SCLK_MMC2>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <0x40>;
> + status = "disabled";
> + };
> +
> + amba {
> + compatible = "arm,amba-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + pdma0: pdma@15610000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x15610000 0x1000>;
> + interrupts = <GIC_SPI 228 0>;
> + clocks = <&cmu_fsys CLK_PDMA0>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> +
> + pdma1: pdma@15600000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x15600000 0x1000>;
> + interrupts = <GIC_SPI 246 0>;
> + clocks = <&cmu_fsys CLK_PDMA1>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> + };
> +
> + audio-subsystem@11400000 {
> + compatible = "samsung,exynos5433-lpass";
> + reg = <0x11400000 0x100>, <0x11500000 0x08>;
> + samsung,pmu-syscon = <&pmu_system_controller>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + adma: adma@11420000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x11420000 0x1000>;
> + interrupts = <GIC_SPI 73 0>;
> + clocks = <&cmu_aud CLK_ACLK_DMAC>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> +
> + i2s0: i2s0@11440000 {
> + compatible = "samsung,exynos7-i2s";
> + reg = <0x11440000 0x100>;
> + dmas = <&adma 0 &adma 2>;
> + dma-names = "tx", "rx";
> + interrupts = <GIC_SPI 70 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
> + <&cmu_aud CLK_SCLK_AUD_I2S>,
> + <&cmu_aud CLK_SCLK_I2S_BCLK>;
> + clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2s0_bus>;
> + status = "disabled";
> + };
> +
> + serial_3: serial@11460000 {
> + compatible = "samsung,exynos5433-uart";
> + reg = <0x11460000 0x100>;
> + interrupts = <GIC_SPI 67 0>;
> + clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
> + <&cmu_aud CLK_SCLK_AUD_UART>;
> + clock-names = "uart", "clk_uart_baud0";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart_aud_bus>;
> + status = "disabled";
> + };
> + };
> + };
> +
> + timer: timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 14
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 11
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 10
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +};
> +
> +#include "exynos5433-pinctrl.dtsi"
> +#include "exynos5433-tmu.dtsi"
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 3/5] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC
@ 2016-11-03 12:26 ` Andi Shyti
0 siblings, 0 replies; 43+ messages in thread
From: Andi Shyti @ 2016-11-03 12:26 UTC (permalink / raw)
To: linux-arm-kernel
Hi Chanwoo,
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Andi
On Thu, Nov 03, 2016 at 03:39:07PM +0900, Chanwoo Choi wrote:
> This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on
> Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports
> PSCI (Power State Coordination Interface) v0.1.
>
> This patch includes following Device Tree node to support Exynos5433 SoC:
> 1. Octa cores for big.LITTLE architecture
> - Cortex-A53 LITTLE Quad-core
> - Cortex-A57 big Quad-core
> - Support PSCI v0.1
>
> 2. Clock controller node
> - CMU_TOP : clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
> - CMU_CPIF : clocks for LLI (Low Latency Interface)
> - CMU_MIF : clocks for DRAM Memory Controller
> - CMU_PERIC : clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS
> - CMU_PERIS : clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC
> - CMU_FSYS : clocks for USB/UFS/SDMMC/TSI/PDMA
> - CMU_G2D : clocks for G2D/MDMA
> - CMU_DISP : clocks for DECON/HDMI/DSIM/MIXER
> - CMU_AUD : clocks for Cortex-A5/BUS/AUDIO
> - CMU_BUS{0|1|2} : clocks for global data buses and global peripheral buses
> - CMU_G3D : clocks for 3D Graphics Engine
> - CMU_GSCL : clocks for GSCALER
> - CMU_APOLLO: clocks for Cortex-A53 Quad-core processor.
> - CMU_ATLAS : clocks for Cortex-A57 Quad-core processor,
> CoreSight and L2 cache controller.
> - CMU_MSCL : clocks for M2M (Memory to Memory) scaler and JPEG IPs.
> - CMU_MFC : clocks for MFC (Multi-Format Codec) IP.
> - CMU_HEVC : clocks for HEVC(High Efficiency Video Codec) decoder IP.
> - CMU_ISP : clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs.
> - CMU_CAM0 : clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs.
> - CMU_CAM1 : clocks for COrtex-A5/MIPI_CSIS2/FIMC_LITE_C/FIMC-FD IPs.
>
> 3. pinctrl node for GPIO
> - alive/aud/cpif/ese/finger/fsys/imem/nfc/peric/touch pad
>
> 4. Timer
> - ARM architecture timer (armv8-timer)
> - MCT (Multi Core Timer) timer
>
> 5. Interrupt controller (GIC-400)
>
> 6. BUS devices
> - HS-I2C (High-Speed I2C) device
> - SPI (Serial Peripheral Interface) device
>
> 7. Sound devices
> - I2S bus
> - LPASS (Low Power Audio Subsystem)
>
> 8. Power management devices
> - CPUFREQ for for Cortex-A53/A57
> - TMU (Thermal Management Unit) for Cortex-A53/A57, G3D, ISP
>
> 9. Display controller devices
> - DECON (Display and enhancement controller) for panel output
> - DSI (Display Serial Interface)
> - MIC (Mobile Image Compressor)
>
> 10. USB
> - USB 3.0 DRD (Dual Role Device) controller
> - USB 3.0 Host controller
>
> 11. Storage devices
> - MSHC (Mobile Storage Host Controller)
>
> 12. Misc devices
> - UART device
> - ADC (Analog Digital Converter)
> - PWM (Pulse Width Modulation)
> - ADMA (Advanced DMA) and PDMA (Peripheral DMA)
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 794 ++++++++++++
> .../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 23 +
> .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 +
> arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 296 +++++
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1356 ++++++++++++++++++++
> 5 files changed, 2491 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> new file mode 100644
> index 000000000000..796881310bf6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> @@ -0,0 +1,794 @@
> +/*
> + * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + * Chanwoo Choi <cw00.choi@samsung.com>
> + *
> + * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device
> + * tree nodes are listed in this file.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#define PIN_PULL_NONE 0
> +#define PIN_PULL_DOWN 1
> +#define PIN_PULL_UP 3
> +
> +#define PIN_DRV_LV1 0
> +#define PIN_DRV_LV2 2
> +#define PIN_DRV_LV3 1
> +#define PIN_DRV_LV4 3
> +
> +#define PIN_IN 0
> +#define PIN_OUT 1
> +#define PIN_FUNC1 2
> +
> +#define PIN(_func, _pin, _pull, _drv) \
> + _pin { \
> + samsung,pins = #_pin; \
> + samsung,pin-function = <PIN_ ##_func>; \
> + samsung,pin-pud = <PIN_PULL_ ##_pull>; \
> + samsung,pin-drv = <PIN_DRV_ ##_drv>; \
> + }
> +
> +&pinctrl_alive {
> + gpa0: gpa0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 0 0>, <GIC_SPI 1 0>, <GIC_SPI 2 0>,
> + <GIC_SPI 3 0>, <GIC_SPI 4 0>, <GIC_SPI 5 0>,
> + <GIC_SPI 6 0>, <GIC_SPI 7 0>;
> + #interrupt-cells = <2>;
> + };
> +
> + gpa1: gpa1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 8 0>, <GIC_SPI 9 0>, <GIC_SPI 10 0>,
> + <GIC_SPI 11 0>, <GIC_SPI 12 0>, <GIC_SPI 13 0>,
> + <GIC_SPI 14 0>, <GIC_SPI 15 0>;
> + #interrupt-cells = <2>;
> + };
> +
> + gpa2: gpa2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpa3: gpa3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf1: gpf1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf2: gpf2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf3: gpf3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf4: gpf4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf5: gpf5 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&pinctrl_aud {
> + gpz0: gpz0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpz1: gpz1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + i2s0_bus: i2s0-bus {
> + samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
> + "gpz0-4", "gpz0-5", "gpz0-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pcm0_bus: pcm0-bus {
> + samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart_aud_bus: uart-aud-bus {
> + samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&pinctrl_cpif {
> + gpv6: gpv6 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&pinctrl_ese {
> + gpj2: gpj2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&pinctrl_finger {
> + gpd5: gpd5 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + spi2_bus: spi2-bus {
> + samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c6_bus: hs-i2c6-bus {
> + samsung,pins = "gpd5-3", "gpd5-2";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&pinctrl_fsys {
> + gph1: gph1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpr4: gpr4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpr0: gpr0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpr1: gpr1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpr2: gpr2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpr3: gpr3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + sd0_clk: sd0-clk {
> + samsung,pins = "gpr0-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_cmd: sd0-cmd {
> + samsung,pins = "gpr0-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_rdqs: sd0-rdqs {
> + samsung,pins = "gpr0-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_qrdy: sd0-qrdy {
> + samsung,pins = "gpr0-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus1: sd0-bus-width1 {
> + samsung,pins = "gpr1-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus4: sd0-bus-width4 {
> + samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus8: sd0-bus-width8 {
> + samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_clk: sd1-clk {
> + samsung,pins = "gpr2-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_cmd: sd1-cmd {
> + samsung,pins = "gpr2-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_bus1: sd1-bus-width1 {
> + samsung,pins = "gpr3-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_bus4: sd1-bus-width4 {
> + samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_bus8: sd1-bus-width8 {
> + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + pcie_bus: pcie_bus {
> + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + };
> +
> + sd2_clk: sd2-clk {
> + samsung,pins = "gpr4-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_cmd: sd2-cmd {
> + samsung,pins = "gpr4-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_cd: sd2-cd {
> + samsung,pins = "gpr4-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_bus1: sd2-bus-width1 {
> + samsung,pins = "gpr4-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_bus4: sd2-bus-width4 {
> + samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_clk_output: sd2-clk-output {
> + samsung,pins = "gpr4-0";
> + samsung,pin-function = <1>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <2>;
> + };
> +
> + sd2_cmd_output: sd2-cmd-output {
> + samsung,pins = "gpr4-1";
> + samsung,pin-function = <1>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <2>;
> + };
> +};
> +
> +&pinctrl_imem {
> + gpf0: gpf0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&pinctrl_nfc {
> + gpj0: gpj0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + hs_i2c4_bus: hs-i2c4-bus {
> + samsung,pins = "gpj0-1", "gpj0-0";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&pinctrl_peric {
> + gpv7: gpv7 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb0: gpb0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc0: gpc0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc1: gpc1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc2: gpc2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc3: gpc3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg0: gpg0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd0: gpd0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd1: gpd1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd2: gpd2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd4: gpd4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd8: gpd8 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd6: gpd6 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd7: gpd7 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg1: gpg1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg2: gpg2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg3: gpg3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + hs_i2c8_bus: hs-i2c8-bus {
> + samsung,pins = "gpb0-1", "gpb0-0";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c9_bus: hs-i2c9-bus {
> + samsung,pins = "gpb0-3", "gpb0-2";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2s1_bus: i2s1-bus {
> + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
> + "gpd4-3", "gpd4-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pcm1_bus: pcm1-bus {
> + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
> + "gpd4-3", "gpd4-4";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spdif_bus: spdif-bus {
> + samsung,pins = "gpd4-3", "gpd4-4";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_spi_pin0: fimc-is-spi-pin0 {
> + samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_spi_pin1: fimc-is-spi-pin1 {
> + samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart0_bus: uart0-bus {
> + samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + };
> +
> + hs_i2c2_bus: hs-i2c2-bus {
> + samsung,pins = "gpd0-3", "gpd0-2";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart2_bus: uart2-bus {
> + samsung,pins = "gpd1-5", "gpd1-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + };
> +
> + uart1_bus: uart1-bus {
> + samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + };
> +
> + hs_i2c3_bus: hs-i2c3-bus {
> + samsung,pins = "gpd1-3", "gpd1-2";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c0_bus: hs-i2c0-bus {
> + samsung,pins = "gpd2-1", "gpd2-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c1_bus: hs-i2c1-bus {
> + samsung,pins = "gpd2-3", "gpd2-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pwm0_out: pwm0-out {
> + samsung,pins = "gpd2-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pwm1_out: pwm1-out {
> + samsung,pins = "gpd2-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pwm2_out: pwm2-out {
> + samsung,pins = "gpd2-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pwm3_out: pwm3-out {
> + samsung,pins = "gpd2-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi1_bus: spi1-bus {
> + samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c7_bus: hs-i2c7-bus {
> + samsung,pins = "gpd2-7", "gpd2-6";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi0_bus: spi0-bus {
> + samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c10_bus: hs-i2c10-bus {
> + samsung,pins = "gpg3-1", "gpg3-0";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + hs_i2c11_bus: hs-i2c11-bus {
> + samsung,pins = "gpg3-3", "gpg3-2";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi3_bus: spi3-bus {
> + samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi4_bus: spi4-bus {
> + samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_uart: fimc-is-uart {
> + samsung,pins = "gpc1-1", "gpc0-7";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_ch0_i2c: fimc-is-ch0_i2c {
> + samsung,pins = "gpc2-1", "gpc2-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_ch0_mclk: fimc-is-ch0_mclk {
> + samsung,pins = "gpd7-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_ch1_i2c: fimc-is-ch1-i2c {
> + samsung,pins = "gpc2-3", "gpc2-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_ch1_mclk: fimc-is-ch1-mclk {
> + samsung,pins = "gpd7-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_ch2_i2c: fimc-is-ch2-i2c {
> + samsung,pins = "gpc2-5", "gpc2-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_ch2_mclk: fimc-is-ch2-mclk {
> + samsung,pins = "gpd7-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&pinctrl_touch {
> + gpj1: gpj1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + hs_i2c5_bus: hs-i2c5-bus {
> + samsung,pins = "gpj1-1", "gpj1-0";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
> new file mode 100644
> index 000000000000..9be2978f1b9a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
> @@ -0,0 +1,23 @@
> +/*
> + * Device tree sources for Exynos5433 TMU sensor configuration
> + *
> + * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/thermal/thermal_exynos.h>
> +
> +#thermal-sensor-cells = <0>;
> +samsung,tmu_gain = <8>;
> +samsung,tmu_reference_voltage = <23>;
> +samsung,tmu_noise_cancel_mode = <4>;
> +samsung,tmu_efuse_value = <75>;
> +samsung,tmu_min_efuse_value = <40>;
> +samsung,tmu_max_efuse_value = <150>;
> +samsung,tmu_first_point_trim = <25>;
> +samsung,tmu_second_point_trim = <85>;
> +samsung,tmu_default_temp_offset = <50>;
> +samsung,tmu_mux_addr = <6>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> new file mode 100644
> index 000000000000..125fe58d77ce
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> @@ -0,0 +1,22 @@
> +/*
> + * Device tree sources for Exynos5433 TMU sensor configuration
> + *
> + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/thermal/thermal_exynos.h>
> +
> +#thermal-sensor-cells = <0>;
> +samsung,tmu_gain = <8>;
> +samsung,tmu_reference_voltage = <16>;
> +samsung,tmu_noise_cancel_mode = <4>;
> +samsung,tmu_efuse_value = <75>;
> +samsung,tmu_min_efuse_value = <40>;
> +samsung,tmu_max_efuse_value = <150>;
> +samsung,tmu_first_point_trim = <25>;
> +samsung,tmu_second_point_trim = <85>;
> +samsung,tmu_default_temp_offset = <50>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> new file mode 100644
> index 000000000000..ceaa05145b8a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> @@ -0,0 +1,296 @@
> +/*
> + * Device tree sources for Exynos5433 thermal zone
> + *
> + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> +thermal-zones {
> + atlas0_thermal: atlas0-thermal {
> + thermal-sensors = <&tmu_atlas0>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + atlas0_alert_0: atlas0-alert-0 {
> + temperature = <65000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas0_alert_1: atlas0-alert-1 {
> + temperature = <70000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas0_alert_2: atlas0-alert-2 {
> + temperature = <75000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas0_alert_3: atlas0-alert-3 {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas0_alert_4: atlas0-alert-4 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas0_alert_5: atlas0-alert-5 {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas0_alert_6: atlas0-alert-6 {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + /* Set maximum frequency as 1800MHz */
> + trip = <&atlas0_alert_0>;
> + cooling-device = <&cpu4 1 2>;
> + };
> + map1 {
> + /* Set maximum frequency as 1700MHz */
> + trip = <&atlas0_alert_1>;
> + cooling-device = <&cpu4 2 3>;
> + };
> + map2 {
> + /* Set maximum frequency as 1600MHz */
> + trip = <&atlas0_alert_2>;
> + cooling-device = <&cpu4 3 4>;
> + };
> + map3 {
> + /* Set maximum frequency as 1500MHz */
> + trip = <&atlas0_alert_3>;
> + cooling-device = <&cpu4 4 5>;
> + };
> + map4 {
> + /* Set maximum frequency as 1400MHz */
> + trip = <&atlas0_alert_4>;
> + cooling-device = <&cpu4 5 7>;
> + };
> + map5 {
> + /* Set maximum frequencyas 1200MHz */
> + trip = <&atlas0_alert_5>;
> + cooling-device = <&cpu4 7 9>;
> + };
> + map6 {
> + /* Set maximum frequency as 1000MHz */
> + trip = <&atlas0_alert_6>;
> + cooling-device = <&cpu4 9 14>;
> + };
> + };
> + };
> +
> + atlas1_thermal: atlas1-thermal {
> + thermal-sensors = <&tmu_atlas1>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + atlas1_alert_0: atlas1-alert-0 {
> + temperature = <65000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas1_alert_1: atlas1-alert-1 {
> + temperature = <70000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas1_alert_2: atlas1-alert-2 {
> + temperature = <75000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas1_alert_3: atlas1-alert-3 {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas1_alert_4: atlas1-alert-4 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas1_alert_5: atlas1-alert-5 {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + atlas1_alert_6: atlas1-alert-6 {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + };
> + };
> +
> + g3d_thermal: g3d-thermal {
> + thermal-sensors = <&tmu_g3d>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + g3d_alert_0: g3d-alert-0 {
> + temperature = <70000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + g3d_alert_1: g3d-alert-1 {
> + temperature = <75000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + g3d_alert_2: g3d-alert-2 {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + g3d_alert_3: g3d-alert-3 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + g3d_alert_4: g3d-alert-4 {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + g3d_alert_5: g3d-alert-5 {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + g3d_alert_6: g3d-alert-6 {
> + temperature = <100000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + };
> + };
> +
> + apollo_thermal: apollo-thermal {
> + thermal-sensors = <&tmu_apollo>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + apollo_alert_0: apollo-alert-0 {
> + temperature = <65000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + apollo_alert_1: apollo-alert-1 {
> + temperature = <70000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + apollo_alert_2: apollo-alert-2 {
> + temperature = <75000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + apollo_alert_3: apollo-alert-3 {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + apollo_alert_4: apollo-alert-4 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + apollo_alert_5: apollo-alert-5 {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + apollo_alert_6: apollo-alert-6 {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + /* Set maximum frequency as 1200MHz */
> + trip = <&apollo_alert_2>;
> + cooling-device = <&cpu0 1 2>;
> + };
> + map1 {
> + /* Set maximum frequency as 1100MHz */
> + trip = <&apollo_alert_3>;
> + cooling-device = <&cpu0 2 3>;
> + };
> + map2 {
> + /* Set maximum frequency as 1000MHz */
> + trip = <&apollo_alert_4>;
> + cooling-device = <&cpu0 3 4>;
> + };
> + map3 {
> + /* Set maximum frequency as 900MHz */
> + trip = <&apollo_alert_5>;
> + cooling-device = <&cpu0 4 5>;
> + };
> + map4 {
> + /* Set maximum frequency as 800MHz */
> + trip = <&apollo_alert_6>;
> + cooling-device = <&cpu0 5 9>;
> + };
> + };
> + };
> +
> + isp_thermal: isp-thermal {
> + thermal-sensors = <&tmu_isp>;
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + trips {
> + isp_alert_0: isp-alert-0 {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + isp_alert_1: isp-alert-1 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + isp_alert_2: isp-alert-2 {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + isp_alert_3: isp-alert-3 {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + isp_alert_4: isp-alert-4 {
> + temperature = <100000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + isp_alert_5: isp-alert-5 {
> + temperature = <105000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + isp_alert_6: isp-alert-6 {
> + temperature = <110000>; /* millicelsius */
> + hysteresis = <1000>; /* millicelsius */
> + type = "active";
> + };
> + };
> + };
> +};
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> new file mode 100644
> index 000000000000..1188630823a7
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -0,0 +1,1356 @@
> +/*
> + * Samsung's Exynos5433 SoC device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Samsung's Exynos5433 SoC device nodes are listed in this file.
> + * Exynos5433 based board files can include this file and provide
> + * values for board specific bindings.
> + *
> + * Note: This file does not include device nodes for all the controllers in
> + * Exynos5433 SoC. As device tree coverage for Exynos5433 increases,
> + * additional nodes can be added to this file.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/clock/exynos5433.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "samsung,exynos5433";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + interrupt-parent = <&gic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at 100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x100>;
> + clock-frequency = <1300000000>;
> + clocks = <&cmu_apollo CLK_SCLK_APOLLO>;
> + clock-names = "apolloclk";
> + operating-points-v2 = <&cluster_a53_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu1: cpu at 101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x101>;
> + clock-frequency = <1300000000>;
> + operating-points-v2 = <&cluster_a53_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu2: cpu at 102 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x102>;
> + clock-frequency = <1300000000>;
> + operating-points-v2 = <&cluster_a53_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu3: cpu at 103 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x103>;
> + clock-frequency = <1300000000>;
> + operating-points-v2 = <&cluster_a53_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu4: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x0>;
> + clock-frequency = <1900000000>;
> + clocks = <&cmu_atlas CLK_SCLK_ATLAS>;
> + clock-names = "atlasclk";
> + operating-points-v2 = <&cluster_a57_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu5: cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x1>;
> + clock-frequency = <1900000000>;
> + operating-points-v2 = <&cluster_a57_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu6: cpu at 2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x2>;
> + clock-frequency = <1900000000>;
> + operating-points-v2 = <&cluster_a57_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu7: cpu at 3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x3>;
> + clock-frequency = <1900000000>;
> + operating-points-v2 = <&cluster_a57_opp_table>;
> + #cooling-cells = <2>;
> + };
> + };
> +
> + cluster_a53_opp_table: opp_table0 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp at 400000000 {
> + opp-hz = /bits/ 64 <400000000>;
> + opp-microvolt = <900000>;
> + };
> + opp at 500000000 {
> + opp-hz = /bits/ 64 <500000000>;
> + opp-microvolt = <925000>;
> + };
> + opp at 600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <950000>;
> + };
> + opp at 700000000 {
> + opp-hz = /bits/ 64 <700000000>;
> + opp-microvolt = <975000>;
> + };
> + opp at 800000000 {
> + opp-hz = /bits/ 64 <800000000>;
> + opp-microvolt = <1000000>;
> + };
> + opp at 900000000 {
> + opp-hz = /bits/ 64 <900000000>;
> + opp-microvolt = <1050000>;
> + };
> + opp at 1000000000 {
> + opp-hz = /bits/ 64 <1000000000>;
> + opp-microvolt = <1075000>;
> + };
> + opp at 1100000000 {
> + opp-hz = /bits/ 64 <1100000000>;
> + opp-microvolt = <1112500>;
> + };
> + opp at 1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <1112500>;
> + };
> + opp at 1300000000 {
> + opp-hz = /bits/ 64 <1300000000>;
> + opp-microvolt = <1150000>;
> + };
> + };
> +
> + cluster_a57_opp_table: opp_table1 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp at 500000000 {
> + opp-hz = /bits/ 64 <500000000>;
> + opp-microvolt = <900000>;
> + };
> + opp at 600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <900000>;
> + };
> + opp at 700000000 {
> + opp-hz = /bits/ 64 <700000000>;
> + opp-microvolt = <912500>;
> + };
> + opp at 800000000 {
> + opp-hz = /bits/ 64 <800000000>;
> + opp-microvolt = <912500>;
> + };
> + opp at 900000000 {
> + opp-hz = /bits/ 64 <900000000>;
> + opp-microvolt = <937500>;
> + };
> + opp at 1000000000 {
> + opp-hz = /bits/ 64 <1000000000>;
> + opp-microvolt = <975000>;
> + };
> + opp at 1100000000 {
> + opp-hz = /bits/ 64 <1100000000>;
> + opp-microvolt = <1012500>;
> + };
> + opp at 1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <1037500>;
> + };
> + opp at 1300000000 {
> + opp-hz = /bits/ 64 <1300000000>;
> + opp-microvolt = <1062500>;
> + };
> + opp at 1400000000 {
> + opp-hz = /bits/ 64 <1400000000>;
> + opp-microvolt = <1087500>;
> + };
> + opp at 1500000000 {
> + opp-hz = /bits/ 64 <1500000000>;
> + opp-microvolt = <1125000>;
> + };
> + opp at 1600000000 {
> + opp-hz = /bits/ 64 <1600000000>;
> + opp-microvolt = <1137500>;
> + };
> + opp at 1700000000 {
> + opp-hz = /bits/ 64 <1700000000>;
> + opp-microvolt = <1175000>;
> + };
> + opp at 1800000000 {
> + opp-hz = /bits/ 64 <1800000000>;
> + opp-microvolt = <1212500>;
> + };
> + opp at 1900000000 {
> + opp-hz = /bits/ 64 <1900000000>;
> + opp-microvolt = <1262500>;
> + };
> + };
> +
> + psci {
> + compatible = "arm,psci";
> + method = "smc";
> + cpu_off = <0x84000002>;
> + cpu_on = <0xC4000003>;
> + };
> +
> + reboot: syscon-reboot {
> + compatible = "syscon-reboot";
> + regmap = <&pmu_system_controller>;
> + offset = <0x400>; /* SWRESET */
> + mask = <0x1>;
> + };
> +
> + soc: soc {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x0 0x18000000>;
> +
> + chipid at 10000000 {
> + compatible = "samsung,exynos4210-chipid";
> + reg = <0x10000000 0x100>;
> + };
> +
> + xxti: xxti {
> + compatible = "fixed-clock";
> + clock-output-names = "oscclk";
> + #clock-cells = <0>;
> + };
> +
> + cmu_top: clock-controller at 10030000 {
> + compatible = "samsung,exynos5433-cmu-top";
> + reg = <0x10030000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "sclk_mphy_pll",
> + "sclk_mfc_pll",
> + "sclk_bus_pll";
> + clocks = <&xxti>,
> + <&cmu_cpif CLK_SCLK_MPHY_PLL>,
> + <&cmu_mif CLK_SCLK_MFC_PLL>,
> + <&cmu_mif CLK_SCLK_BUS_PLL>;
> + };
> +
> + cmu_cpif: clock-controller at 10fc0000 {
> + compatible = "samsung,exynos5433-cmu-cpif";
> + reg = <0x10fc0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk";
> + clocks = <&xxti>;
> + };
> +
> + cmu_mif: clock-controller at 105b0000 {
> + compatible = "samsung,exynos5433-cmu-mif";
> + reg = <0x105b0000 0x2000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "sclk_mphy_pll";
> + clocks = <&xxti>,
> + <&cmu_cpif CLK_SCLK_MPHY_PLL>;
> + };
> +
> + cmu_peric: clock-controller at 14c80000 {
> + compatible = "samsung,exynos5433-cmu-peric";
> + reg = <0x14c80000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + cmu_peris: clock-controller at 0x10040000 {
> + compatible = "samsung,exynos5433-cmu-peris";
> + reg = <0x10040000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + cmu_fsys: clock-controller at 156e0000 {
> + compatible = "samsung,exynos5433-cmu-fsys";
> + reg = <0x156e0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "sclk_ufs_mphy",
> + "div_aclk_fsys_200",
> + "sclk_pcie_100_fsys",
> + "sclk_ufsunipro_fsys",
> + "sclk_mmc2_fsys",
> + "sclk_mmc1_fsys",
> + "sclk_mmc0_fsys",
> + "sclk_usbhost30_fsys",
> + "sclk_usbdrd30_fsys";
> + clocks = <&xxti>,
> + <&cmu_cpif CLK_SCLK_UFS_MPHY>,
> + <&cmu_top CLK_DIV_ACLK_FSYS_200>,
> + <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
> + <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
> + <&cmu_top CLK_SCLK_MMC2_FSYS>,
> + <&cmu_top CLK_SCLK_MMC1_FSYS>,
> + <&cmu_top CLK_SCLK_MMC0_FSYS>,
> + <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
> + <&cmu_top CLK_SCLK_USBDRD30_FSYS>;
> + };
> +
> + cmu_g2d: clock-controller at 12460000 {
> + compatible = "samsung,exynos5433-cmu-g2d";
> + reg = <0x12460000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "aclk_g2d_266",
> + "aclk_g2d_400";
> + clocks = <&xxti>,
> + <&cmu_top CLK_ACLK_G2D_266>,
> + <&cmu_top CLK_ACLK_G2D_400>;
> + };
> +
> + cmu_disp: clock-controller at 13b90000 {
> + compatible = "samsung,exynos5433-cmu-disp";
> + reg = <0x13b90000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "sclk_dsim1_disp",
> + "sclk_dsim0_disp",
> + "sclk_dsd_disp",
> + "sclk_decon_tv_eclk_disp",
> + "sclk_decon_vclk_disp",
> + "sclk_decon_eclk_disp",
> + "sclk_decon_tv_vclk_disp",
> + "aclk_disp_333";
> + clocks = <&xxti>,
> + <&cmu_mif CLK_SCLK_DSIM1_DISP>,
> + <&cmu_mif CLK_SCLK_DSIM0_DISP>,
> + <&cmu_mif CLK_SCLK_DSD_DISP>,
> + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
> + <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
> + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
> + <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
> + <&cmu_mif CLK_ACLK_DISP_333>;
> + };
> +
> + cmu_aud: clock-controller at 114c0000 {
> + compatible = "samsung,exynos5433-cmu-aud";
> + reg = <0x114c0000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + cmu_bus0: clock-controller at 13600000 {
> + compatible = "samsung,exynos5433-cmu-bus0";
> + reg = <0x13600000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "aclk_bus0_400";
> + clocks = <&cmu_top CLK_ACLK_BUS0_400>;
> + };
> +
> + cmu_bus1: clock-controller at 14800000 {
> + compatible = "samsung,exynos5433-cmu-bus1";
> + reg = <0x14800000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "aclk_bus1_400";
> + clocks = <&cmu_top CLK_ACLK_BUS1_400>;
> + };
> +
> + cmu_bus2: clock-controller at 13400000 {
> + compatible = "samsung,exynos5433-cmu-bus2";
> + reg = <0x13400000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk", "aclk_bus2_400";
> + clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
> + };
> +
> + cmu_g3d: clock-controller at 14aa0000 {
> + compatible = "samsung,exynos5433-cmu-g3d";
> + reg = <0x14aa0000 0x2000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk", "aclk_g3d_400";
> + clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
> + };
> +
> + cmu_gscl: clock-controller at 13cf0000 {
> + compatible = "samsung,exynos5433-cmu-gscl";
> + reg = <0x13cf0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "aclk_gscl_111",
> + "aclk_gscl_333";
> + clocks = <&xxti>,
> + <&cmu_top CLK_ACLK_GSCL_111>,
> + <&cmu_top CLK_ACLK_GSCL_333>;
> + };
> +
> + cmu_apollo: clock-controller at 11900000 {
> + compatible = "samsung,exynos5433-cmu-apollo";
> + reg = <0x11900000 0x2000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk", "sclk_bus_pll_apollo";
> + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
> + };
> +
> + cmu_atlas: clock-controller at 11800000 {
> + compatible = "samsung,exynos5433-cmu-atlas";
> + reg = <0x11800000 0x2000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk", "sclk_bus_pll_atlas";
> + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
> + };
> +
> + cmu_mscl: clock-controller at 105d0000 {
> + compatible = "samsung,exynos5433-cmu-mscl";
> + reg = <0x150d0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "sclk_jpeg_mscl",
> + "aclk_mscl_400";
> + clocks = <&xxti>,
> + <&cmu_top CLK_SCLK_JPEG_MSCL>,
> + <&cmu_top CLK_ACLK_MSCL_400>;
> + };
> +
> + cmu_mfc: clock-controller at 15280000 {
> + compatible = "samsung,exynos5433-cmu-mfc";
> + reg = <0x15280000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk", "aclk_mfc_400";
> + clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
> + };
> +
> + cmu_hevc: clock-controller at 14f80000 {
> + compatible = "samsung,exynos5433-cmu-hevc";
> + reg = <0x14f80000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk", "aclk_hevc_400";
> + clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
> + };
> +
> + cmu_isp: clock-controller at 146d0000 {
> + compatible = "samsung,exynos5433-cmu-isp";
> + reg = <0x146d0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "aclk_isp_dis_400",
> + "aclk_isp_400";
> + clocks = <&xxti>,
> + <&cmu_top CLK_ACLK_ISP_DIS_400>,
> + <&cmu_top CLK_ACLK_ISP_400>;
> + };
> +
> + cmu_cam0: clock-controller at 120d0000 {
> + compatible = "samsung,exynos5433-cmu-cam0";
> + reg = <0x120d0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "aclk_cam0_333",
> + "aclk_cam0_400",
> + "aclk_cam0_552";
> + clocks = <&xxti>,
> + <&cmu_top CLK_ACLK_CAM0_333>,
> + <&cmu_top CLK_ACLK_CAM0_400>,
> + <&cmu_top CLK_ACLK_CAM0_552>;
> + };
> +
> + cmu_cam1: clock-controller at 145d0000 {
> + compatible = "samsung,exynos5433-cmu-cam1";
> + reg = <0x145d0000 0x1000>;
> + #clock-cells = <1>;
> +
> + clock-names = "oscclk",
> + "sclk_isp_uart_cam1",
> + "sclk_isp_spi1_cam1",
> + "sclk_isp_spi0_cam1",
> + "aclk_cam1_333",
> + "aclk_cam1_400",
> + "aclk_cam1_552";
> + clocks = <&xxti>,
> + <&cmu_top CLK_SCLK_ISP_UART_CAM1>,
> + <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
> + <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
> + <&cmu_top CLK_ACLK_CAM1_333>,
> + <&cmu_top CLK_ACLK_CAM1_400>,
> + <&cmu_top CLK_ACLK_CAM1_552>;
> + };
> +
> + tmu_atlas0: tmu at 10060000 {
> + compatible = "samsung,exynos5433-tmu";
> + reg = <0x10060000 0x200>;
> + interrupts = <GIC_SPI 95 0>;
> + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
> + <&cmu_peris CLK_SCLK_TMU0>;
> + clock-names = "tmu_apbif", "tmu_sclk";
> + #include "exynos5433-tmu-sensor-conf.dtsi"
> + status = "disabled";
> + };
> +
> + tmu_atlas1: tmu at 10068000 {
> + compatible = "samsung,exynos5433-tmu";
> + reg = <0x10068000 0x200>;
> + interrupts = <GIC_SPI 96 0>;
> + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
> + <&cmu_peris CLK_SCLK_TMU0>;
> + clock-names = "tmu_apbif", "tmu_sclk";
> + #include "exynos5433-tmu-sensor-conf.dtsi"
> + status = "disabled";
> + };
> +
> + tmu_g3d: tmu at 10070000 {
> + compatible = "samsung,exynos5433-tmu";
> + reg = <0x10070000 0x200>;
> + interrupts = <GIC_SPI 99 0>;
> + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
> + <&cmu_peris CLK_SCLK_TMU1>;
> + clock-names = "tmu_apbif", "tmu_sclk";
> + #include "exynos5433-tmu-g3d-sensor-conf.dtsi"
> + status = "disabled";
> + };
> +
> + tmu_apollo: tmu at 10078000 {
> + compatible = "samsung,exynos5433-tmu";
> + reg = <0x10078000 0x200>;
> + interrupts = <GIC_SPI 115 0>;
> + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
> + <&cmu_peris CLK_SCLK_TMU1>;
> + clock-names = "tmu_apbif", "tmu_sclk";
> + #include "exynos5433-tmu-sensor-conf.dtsi"
> + status = "disabled";
> + };
> +
> + tmu_isp: tmu at 1007c000 {
> + compatible = "samsung,exynos5433-tmu";
> + reg = <0x1007c000 0x200>;
> + interrupts = <GIC_SPI 94 0>;
> + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
> + <&cmu_peris CLK_SCLK_TMU1>;
> + clock-names = "tmu_apbif", "tmu_sclk";
> + #include "exynos5433-tmu-sensor-conf.dtsi"
> + status = "disabled";
> + };
> +
> + mct at 101c0000 {
> + compatible = "samsung,exynos4210-mct";
> + reg = <0x101c0000 0x800>;
> + interrupts = <GIC_SPI 102 0>, <GIC_SPI 103 0>,
> + <GIC_SPI 104 0>, <GIC_SPI 105 0>,
> + <GIC_SPI 106 0>, <GIC_SPI 107 0>,
> + <GIC_SPI 108 0>, <GIC_SPI 109 0>,
> + <GIC_SPI 110 0>, <GIC_SPI 111 0>,
> + <GIC_SPI 112 0>, <GIC_SPI 113 0>;
> + clocks = <&xxti>, <&cmu_peris CLK_PCLK_MCT>;
> + clock-names = "fin_pll", "mct";
> + };
> +
> + pinctrl_alive: pinctrl at 10580000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
> +
> + wakeup-interrupt-controller {
> + compatible = "samsung,exynos7-wakeup-eint";
> + interrupts = <GIC_SPI 16 0>;
> + };
> + };
> +
> + pinctrl_aud: pinctrl at 114b0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x114b0000 0x1000>;
> + interrupts = <GIC_SPI 68 0>;
> + };
> +
> + pinctrl_cpif: pinctrl at 10fe0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x10fe0000 0x1000>;
> + interrupts = <GIC_SPI 179 0>;
> + };
> +
> + pinctrl_ese: pinctrl at 14ca0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x14ca0000 0x1000>;
> + interrupts = <GIC_SPI 413 0>;
> + };
> +
> + pinctrl_finger: pinctrl at 14cb0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x14cb0000 0x1000>;
> + interrupts = <GIC_SPI 414 0>;
> + };
> +
> + pinctrl_fsys: pinctrl at 15690000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x15690000 0x1000>;
> + interrupts = <GIC_SPI 229 0>;
> + };
> +
> + pinctrl_imem: pinctrl at 11090000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x11090000 0x1000>;
> + interrupts = <GIC_SPI 325 0>;
> + };
> +
> + pinctrl_nfc: pinctrl at 14cd0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x14cd0000 0x1000>;
> + interrupts = <GIC_SPI 441 0>;
> + };
> +
> + pinctrl_peric: pinctrl at 14cc0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x14cc0000 0x1100>;
> + interrupts = <GIC_SPI 440 0>;
> + };
> +
> + pinctrl_touch: pinctrl at 14ce0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x14ce0000 0x1100>;
> + interrupts = <GIC_SPI 442 0>;
> + };
> +
> + pmu_system_controller: system-controller at 105c0000 {
> + compatible = "samsung,exynos5433-pmu", "syscon";
> + reg = <0x105c0000 0x5008>;
> + #clock-cells = <1>;
> + clock-names = "clkout16";
> + clocks = <&xxti>;
> + };
> +
> + gic: interrupt-controller at 11001000 {
> + compatible = "arm,gic-400";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x11001000 0x1000>,
> + <0x11002000 0x2000>,
> + <0x11004000 0x2000>,
> + <0x11006000 0x2000>;
> + interrupts = <GIC_PPI 9 0xf04>;
> + };
> +
> + mipi_phy: video-phy at 105c0710 {
> + compatible = "samsung,exynos5433-mipi-video-phy";
> + #phy-cells = <1>;
> + samsung,pmu-syscon = <&pmu_system_controller>;
> + samsung,cam0-sysreg = <&syscon_cam0>;
> + samsung,cam1-sysreg = <&syscon_cam1>;
> + samsung,disp-sysreg = <&syscon_disp>;
> + };
> +
> + decon: decon at 13800000 {
> + compatible = "samsung,exynos5433-decon";
> + reg = <0x13800000 0x2104>;
> + clocks = <&cmu_disp CLK_PCLK_DECON>,
> + <&cmu_disp CLK_ACLK_DECON>,
> + <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
> + <&cmu_disp CLK_ACLK_XIU_DECON0X>,
> + <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
> + <&cmu_disp CLK_SCLK_DECON_VCLK>,
> + <&cmu_disp CLK_SCLK_DECON_ECLK>;
> + clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
> + "aclk_xiu_decon0x", "pclk_smmu_decon0x",
> + "sclk_decon_vclk", "sclk_decon_eclk";
> + interrupt-names = "fifo", "vsync", "lcd_sys";
> + interrupts = <GIC_SPI 201 0>, <GIC_SPI 202 0>,
> + <GIC_SPI 203 0>;
> + samsung,disp-sysreg = <&syscon_disp>;
> + status = "disabled";
> + iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
> + iommu-names = "m0", "m1";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + decon_to_mic: endpoint {
> + remote-endpoint =
> + <&mic_to_decon>;
> + };
> + };
> + };
> + };
> +
> + dsi: dsi at 13900000 {
> + compatible = "samsung,exynos5433-mipi-dsi";
> + reg = <0x13900000 0xC0>;
> + interrupts = <GIC_SPI 205 0>;
> + phys = <&mipi_phy 1>;
> + phy-names = "dsim";
> + clocks = <&cmu_disp CLK_PCLK_DSIM0>,
> + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
> + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
> + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
> + <&cmu_disp CLK_SCLK_DSIM0>;
> + clock-names = "bus_clk",
> + "phyclk_mipidphy0_bitclkdiv8",
> + "phyclk_mipidphy0_rxclkesc0",
> + "sclk_rgb_vclk_to_dsim0",
> + "sclk_mipi";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + dsi_to_mic: endpoint {
> + remote-endpoint = <&mic_to_dsi>;
> + };
> + };
> + };
> + };
> +
> + mic: mic at 13930000 {
> + compatible = "samsung,exynos5433-mic";
> + reg = <0x13930000 0x48>;
> + clocks = <&cmu_disp CLK_PCLK_MIC0>,
> + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
> + clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
> + samsung,disp-syscon = <&syscon_disp>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + mic_to_decon: endpoint {
> + remote-endpoint =
> + <&decon_to_mic>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + mic_to_dsi: endpoint {
> + remote-endpoint = <&dsi_to_mic>;
> + };
> + };
> + };
> + };
> +
> + syscon_disp: syscon at 13b80000 {
> + compatible = "syscon";
> + reg = <0x13b80000 0x1010>;
> + };
> +
> + syscon_cam0: syscon at 120f0000 {
> + compatible = "syscon";
> + reg = <0x120f0000 0x1020>;
> + };
> +
> + syscon_cam1: syscon at 145f0000 {
> + compatible = "syscon";
> + reg = <0x145f0000 0x1038>;
> + };
> +
> + sysmmu_decon0x: sysmmu at 0x13a00000 {
> + compatible = "samsung,exynos-sysmmu";
> + reg = <0x13a00000 0x1000>;
> + interrupts = <GIC_SPI 192 0>;
> + clock-names = "pclk", "aclk";
> + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
> + <&cmu_disp CLK_ACLK_SMMU_DECON0X>;
> + #iommu-cells = <0>;
> + };
> +
> + sysmmu_decon1x: sysmmu at 0x13a10000 {
> + compatible = "samsung,exynos-sysmmu";
> + reg = <0x13a10000 0x1000>;
> + interrupts = <GIC_SPI 194 0>;
> + clock-names = "pclk", "aclk";
> + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
> + <&cmu_disp CLK_ACLK_SMMU_DECON1X>;
> + #iommu-cells = <0>;
> + };
> +
> + serial_0: serial at 14c10000 {
> + compatible = "samsung,exynos5433-uart";
> + reg = <0x14c10000 0x100>;
> + interrupts = <GIC_SPI 421 0>;
> + clocks = <&cmu_peric CLK_PCLK_UART0>,
> + <&cmu_peric CLK_SCLK_UART0>;
> + clock-names = "uart", "clk_uart_baud0";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_bus>;
> + status = "disabled";
> + };
> +
> + serial_1: serial at 14c20000 {
> + compatible = "samsung,exynos5433-uart";
> + reg = <0x14c20000 0x100>;
> + interrupts = <GIC_SPI 422 0>;
> + clocks = <&cmu_peric CLK_PCLK_UART1>,
> + <&cmu_peric CLK_SCLK_UART1>;
> + clock-names = "uart", "clk_uart_baud0";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_bus>;
> + status = "disabled";
> + };
> +
> + serial_2: serial at 14c30000 {
> + compatible = "samsung,exynos5433-uart";
> + reg = <0x14c30000 0x100>;
> + interrupts = <GIC_SPI 423 0>;
> + clocks = <&cmu_peric CLK_PCLK_UART2>,
> + <&cmu_peric CLK_SCLK_UART2>;
> + clock-names = "uart", "clk_uart_baud0";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart2_bus>;
> + status = "disabled";
> + };
> +
> + spi_0: spi at 14d20000 {
> + compatible = "samsung,exynos5433-spi";
> + reg = <0x14d20000 0x100>;
> + interrupts = <GIC_SPI 432 0>;
> + dmas = <&pdma0 9>, <&pdma0 8>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cmu_peric CLK_PCLK_SPI0>,
> + <&cmu_peric CLK_SCLK_SPI0>,
> + <&cmu_peric CLK_SCLK_IOCLK_SPI0>;
> + clock-names = "spi", "spi_busclk0", "spi_ioclk";
> + samsung,spi-src-clk = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi0_bus>;
> + num-cs = <1>;
> + status = "disabled";
> + };
> +
> + spi_1: spi at 14d30000 {
> + compatible = "samsung,exynos5433-spi";
> + reg = <0x14d30000 0x100>;
> + interrupts = <GIC_SPI 433 0>;
> + dmas = <&pdma0 11>, <&pdma0 10>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cmu_peric CLK_PCLK_SPI1>,
> + <&cmu_peric CLK_SCLK_SPI1>,
> + <&cmu_peric CLK_SCLK_IOCLK_SPI1>;
> + clock-names = "spi", "spi_busclk0", "spi_ioclk";
> + samsung,spi-src-clk = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi1_bus>;
> + num-cs = <1>;
> + status = "disabled";
> + };
> +
> + spi_2: spi at 14d40000 {
> + compatible = "samsung,exynos5433-spi";
> + reg = <0x14d40000 0x100>;
> + interrupts = <GIC_SPI 434 0>;
> + dmas = <&pdma0 13>, <&pdma0 12>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cmu_peric CLK_PCLK_SPI2>,
> + <&cmu_peric CLK_SCLK_SPI2>,
> + <&cmu_peric CLK_SCLK_IOCLK_SPI2>;
> + clock-names = "spi", "spi_busclk0", "spi_ioclk";
> + samsung,spi-src-clk = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi2_bus>;
> + num-cs = <1>;
> + status = "disabled";
> + };
> +
> + spi_3: spi at 14d50000 {
> + compatible = "samsung,exynos5433-spi";
> + reg = <0x14d50000 0x100>;
> + interrupts = <GIC_SPI 447 0>;
> + dmas = <&pdma0 23>, <&pdma0 22>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cmu_peric CLK_PCLK_SPI3>,
> + <&cmu_peric CLK_SCLK_SPI3>,
> + <&cmu_peric CLK_SCLK_IOCLK_SPI3>;
> + clock-names = "spi", "spi_busclk0", "spi_ioclk";
> + samsung,spi-src-clk = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi3_bus>;
> + num-cs = <1>;
> + status = "disabled";
> + };
> +
> + spi_4: spi at 14d00000 {
> + compatible = "samsung,exynos5433-spi";
> + reg = <0x14d00000 0x100>;
> + interrupts = <GIC_SPI 412 0>;
> + dmas = <&pdma0 25>, <&pdma0 24>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cmu_peric CLK_PCLK_SPI4>,
> + <&cmu_peric CLK_SCLK_SPI4>,
> + <&cmu_peric CLK_SCLK_IOCLK_SPI4>;
> + clock-names = "spi", "spi_busclk0", "spi_ioclk";
> + samsung,spi-src-clk = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi4_bus>;
> + num-cs = <1>;
> + status = "disabled";
> + };
> +
> + adc: adc at 14d10000 {
> + compatible = "samsung,exynos7-adc";
> + reg = <0x14d10000 0x100>;
> + interrupts = <GIC_SPI 438 0>;
> + clock-names = "adc";
> + clocks = <&cmu_peric CLK_PCLK_ADCIF>;
> + #io-channel-cells = <1>;
> + io-channel-ranges;
> + status = "disabled";
> + };
> +
> + pwm: pwm at 14dd0000 {
> + compatible = "samsung,exynos4210-pwm";
> + reg = <0x14dd0000 0x100>;
> + interrupts = <GIC_SPI 416 0>, <GIC_SPI 417 0>,
> + <GIC_SPI 418 0>, <GIC_SPI 419 0>,
> + <GIC_SPI 420 0>;
> + samsung,pwm-outputs = <0>, <1>, <2>, <3>;
> + clocks = <&cmu_peric CLK_PCLK_PWM>;
> + clock-names = "timers";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + hsi2c_0: hsi2c at 14e40000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14e40000 0x1000>;
> + interrupts = <GIC_SPI 428 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c0_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C0>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_1: hsi2c at 14e50000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14e50000 0x1000>;
> + interrupts = <GIC_SPI 429 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c1_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C1>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_2: hsi2c at 14e60000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14e60000 0x1000>;
> + interrupts = <GIC_SPI 430 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c2_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C2>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_3: hsi2c at 14e70000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14e70000 0x1000>;
> + interrupts = <GIC_SPI 431 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c3_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C3>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_4: hsi2c at 14ec0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14ec0000 0x1000>;
> + interrupts = <GIC_SPI 424 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c4_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C4>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_5: hsi2c at 14ed0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14ed0000 0x1000>;
> + interrupts = <GIC_SPI 425 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c5_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C5>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_6: hsi2c at 14ee0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14ee0000 0x1000>;
> + interrupts = <GIC_SPI 426 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c6_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C6>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_7: hsi2c at 14ef0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14ef0000 0x1000>;
> + interrupts = <GIC_SPI 427 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c7_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C7>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_8: hsi2c at 14d90000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14d90000 0x1000>;
> + interrupts = <GIC_SPI 443 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c8_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C8>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_9: hsi2c at 14da0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14da0000 0x1000>;
> + interrupts = <GIC_SPI 444 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c9_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C9>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_10: hsi2c at 14de0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14de0000 0x1000>;
> + interrupts = <GIC_SPI 445 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c10_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C10>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_11: hsi2c at 14df0000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x14df0000 0x1000>;
> + interrupts = <GIC_SPI 446 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c11_bus>;
> + clocks = <&cmu_peric CLK_PCLK_HSI2C11>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + usbdrd30: usb at 15400000 {
> + compatible = "samsung,exynos5250-dwusb3";
> + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
> + <&cmu_fsys CLK_SCLK_USBDRD30>;
> + clock-names = "usbdrd30", "usbdrd30_susp_clk";
> + assigned-clocks =
> + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
> + <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
> + <&cmu_top CLK_DIV_SCLK_USBDRD30>;
> + assigned-clock-parents =
> + <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
> + <&cmu_top CLK_MOUT_BUS_PLL_USER>;
> + assigned-clock-rates = <0>, <0>, <66700000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + status = "disabled";
> +
> + dwc3 at 15400000 {
> + compatible = "snps,dwc3";
> + reg = <0x15400000 0x10000>;
> + interrupts = <GIC_SPI 231 0>;
> + phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
> + phy-names = "usb2-phy", "usb3-phy";
> + };
> + };
> +
> + usbdrd30_phy: phy at 15500000 {
> + compatible = "samsung,exynos5433-usbdrd-phy";
> + reg = <0x15500000 0x100>;
> + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>,
> + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
> + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>,
> + <&cmu_fsys CLK_SCLK_USBDRD30>;
> + clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
> + "itp";
> + assigned-clocks =
> + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
> + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>;
> + assigned-clock-parents =
> + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
> + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>;
> + #phy-cells = <1>;
> + samsung,pmu-syscon = <&pmu_system_controller>;
> + status = "disabled";
> + };
> +
> + usbhost30_phy: phy at 15580000 {
> + compatible = "samsung,exynos5433-usbdrd-phy";
> + reg = <0x15580000 0x100>;
> + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>,
> + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
> + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>,
> + <&cmu_fsys CLK_SCLK_USBHOST30>;
> + clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
> + "itp";
> + assigned-clocks =
> + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
> + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>;
> + assigned-clock-parents =
> + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
> + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
> + #phy-cells = <1>;
> + samsung,pmu-syscon = <&pmu_system_controller>;
> + status = "disabled";
> + };
> +
> + usbhost30: usb at 15a00000 {
> + compatible = "samsung,exynos5250-dwusb3";
> + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
> + <&cmu_fsys CLK_SCLK_USBHOST30>;
> + clock-names = "usbdrd30", "usbdrd30_susp_clk";
> + assigned-clocks =
> + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
> + <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
> + <&cmu_top CLK_DIV_SCLK_USBHOST30>;
> + assigned-clock-parents =
> + <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
> + <&cmu_top CLK_MOUT_BUS_PLL_USER>;
> + assigned-clock-rates = <0>, <0>, <66700000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + status = "disabled";
> +
> + usbdrd_dwc3_0: dwc3 at 15a00000 {
> + compatible = "snps,dwc3";
> + reg = <0x15a00000 0x10000>;
> + interrupts = <GIC_SPI 244 0>;
> + phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
> + phy-names = "usb2-phy", "usb3-phy";
> + };
> + };
> +
> + mshc_0: mshc at 15540000 {
> + compatible = "samsung,exynos7-dw-mshc-smu";
> + interrupts = <GIC_SPI 225 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x15540000 0x2000>;
> + clocks = <&cmu_fsys CLK_ACLK_MMC0>,
> + <&cmu_fsys CLK_SCLK_MMC0>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <0x40>;
> + status = "disabled";
> + };
> +
> + mshc_1: mshc at 15550000 {
> + compatible = "samsung,exynos7-dw-mshc-smu";
> + interrupts = <GIC_SPI 226 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x15550000 0x2000>;
> + clocks = <&cmu_fsys CLK_ACLK_MMC1>,
> + <&cmu_fsys CLK_SCLK_MMC1>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <0x40>;
> + status = "disabled";
> + };
> +
> + mshc_2: mshc at 15560000 {
> + compatible = "samsung,exynos7-dw-mshc-smu";
> + interrupts = <GIC_SPI 227 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x15560000 0x2000>;
> + clocks = <&cmu_fsys CLK_ACLK_MMC2>,
> + <&cmu_fsys CLK_SCLK_MMC2>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <0x40>;
> + status = "disabled";
> + };
> +
> + amba {
> + compatible = "arm,amba-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + pdma0: pdma at 15610000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x15610000 0x1000>;
> + interrupts = <GIC_SPI 228 0>;
> + clocks = <&cmu_fsys CLK_PDMA0>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> +
> + pdma1: pdma at 15600000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x15600000 0x1000>;
> + interrupts = <GIC_SPI 246 0>;
> + clocks = <&cmu_fsys CLK_PDMA1>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> + };
> +
> + audio-subsystem at 11400000 {
> + compatible = "samsung,exynos5433-lpass";
> + reg = <0x11400000 0x100>, <0x11500000 0x08>;
> + samsung,pmu-syscon = <&pmu_system_controller>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + adma: adma at 11420000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x11420000 0x1000>;
> + interrupts = <GIC_SPI 73 0>;
> + clocks = <&cmu_aud CLK_ACLK_DMAC>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> +
> + i2s0: i2s0 at 11440000 {
> + compatible = "samsung,exynos7-i2s";
> + reg = <0x11440000 0x100>;
> + dmas = <&adma 0 &adma 2>;
> + dma-names = "tx", "rx";
> + interrupts = <GIC_SPI 70 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
> + <&cmu_aud CLK_SCLK_AUD_I2S>,
> + <&cmu_aud CLK_SCLK_I2S_BCLK>;
> + clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2s0_bus>;
> + status = "disabled";
> + };
> +
> + serial_3: serial at 11460000 {
> + compatible = "samsung,exynos5433-uart";
> + reg = <0x11460000 0x100>;
> + interrupts = <GIC_SPI 67 0>;
> + clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
> + <&cmu_aud CLK_SCLK_AUD_UART>;
> + clock-names = "uart", "clk_uart_baud0";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart_aud_bus>;
> + status = "disabled";
> + };
> + };
> + };
> +
> + timer: timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 14
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 11
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 10
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +};
> +
> +#include "exynos5433-pinctrl.dtsi"
> +#include "exynos5433-tmu.dtsi"
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 4/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
@ 2016-11-03 12:26 ` Andi Shyti
0 siblings, 0 replies; 43+ messages in thread
From: Andi Shyti @ 2016-11-03 12:26 UTC (permalink / raw)
To: Chanwoo Choi
Cc: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, chanwoo
Hi Chanwoo,
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Andi
On Thu, Nov 03, 2016 at 03:39:08PM +0900, Chanwoo Choi wrote:
> This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board.
> This board fully support the all things for mobile target.
>
> This patch supports the following devices:
> 1. basic SoC
> - Initial booting for Samsung Exynos5433 SoC
> - DRAM LPDDR3 (3GB)
> - eMMC (32GB)
> - ARM architecture timer
>
> 2. power management devices
> - Sasmung S2MPS13 PMIC for the power supply
> - CPUFREQ for big.LITTLE cores
> - TMU for big.LITTLE cores and GPU
> - ADC with thermistor to measure the temperature of AP/Battery/Charger
> - Maxim MAX77843 Interface PMIC (MUIC/Haptic/Regulator)
>
> 3. sound devices
> - I2S for sound bus
> - LPASS for sound power control
> - Wolfson WM5110 for sound codec
> - Maxim MAX98504 for speaker amplifier
> - TM2 ASoC Machine device driver node
>
> 3. display devices
> - DECON, DSI and MIC for the panel output
>
> 4. usb devices
> - USB 3.0 DRD (Dual Role Device)
> - USB 3.0 Host controller
>
> 5. storage devices
> - MSHC (Mobile Storage Host Controller) for eMMC device
>
> 6. misc devices
> - gpio-keys (power, volume up/down, home key)
> - PWM (Pulse Width Modulation Timer)
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> .../bindings/arm/samsung/samsung-boards.txt | 1 +
> arch/arm64/boot/dts/exynos/Makefile | 4 +-
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 974 +++++++++++++++++++++
> 3 files changed, 978 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> index 0ea7f14ef294..339af8b9cdc5 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> @@ -15,6 +15,7 @@ Required root node properties:
> - "samsung,xyref5260" - for Exynos5260-based Samsung board.
> - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
> - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
> + - "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
> - "samsung,sd5v1" - for Exynos5440-based Samsung board.
> - "samsung,ssdk5440" - for Exynos5440-based Samsung board.
>
> diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
> index 50c9b9383cfa..947c750acba1 100644
> --- a/arch/arm64/boot/dts/exynos/Makefile
> +++ b/arch/arm64/boot/dts/exynos/Makefile
> @@ -1,4 +1,6 @@
> -dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb
> +dtb-$(CONFIG_ARCH_EXYNOS) += \
> + exynos5433-tm2.dtb \
> + exynos7-espresso.dtb
>
> always := $(dtb-y)
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> new file mode 100644
> index 000000000000..9ea3f32bae9e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -0,0 +1,974 @@
> +/*
> + * SAMSUNG Exynos5433 TM2 board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2 board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include "exynos5433.dtsi"
> +#include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + model = "Samsung TM2 board";
> + compatible = "samsung,tm2", "samsung,exynos5433";
> +
> + aliases {
> + pinctrl0 = &pinctrl_alive;
> + pinctrl1 = &pinctrl_aud;
> + pinctrl2 = &pinctrl_cpif;
> + pinctrl3 = &pinctrl_ese;
> + pinctrl4 = &pinctrl_finger;
> + pinctrl5 = &pinctrl_fsys;
> + pinctrl6 = &pinctrl_imem;
> + pinctrl7 = &pinctrl_nfc;
> + pinctrl8 = &pinctrl_peric;
> + pinctrl9 = &pinctrl_touch;
> + serial0 = &serial_0;
> + serial1 = &serial_1;
> + serial2 = &serial_2;
> + serial3 = &serial_3;
> + spi0 = &spi_0;
> + spi1 = &spi_1;
> + spi2 = &spi_2;
> + spi3 = &spi_3;
> + spi4 = &spi_4;
> + };
> +
> + chosen {
> + stdout-path = &serial_1;
> + };
> +
> + memory@20000000 {
> + device_type = "memory";
> + reg = <0x0 0x20000000 0x0 0xc0000000>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + power-key {
> + gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + label = "power key";
> + debounce-interval = <10>;
> + };
> +
> + volume-up-key {
> + gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + label = "volume-up key";
> + debounce-interval = <10>;
> + };
> +
> + volume-down-key {
> + gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEDOWN>;
> + label = "volume-down key";
> + debounce-interval = <10>;
> + };
> +
> + homepage-key {
> + gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_MENU>;
> + label = "homepage key";
> + debounce-interval = <10>;
> + };
> + };
> +
> + i2c_max98504: i2c-gpio-0 {
> + compatible = "i2c-gpio";
> + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
> + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
> + i2c-gpio,delay-us = <2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +
> + max98504: max98504@31 {
> + compatible = "maxim,max98504";
> + reg = <0x31>;
> + maxim,rx-path = <1>;
> + maxim,tx-path = <1>;
> + maxim,tx-channel-mask = <3>;
> + maxim,tx-channel-source = <2>;
> + };
> + };
> +
> + sound {
> + compatible = "samsung,tm2-audio";
> + audio-codec = <&wm5110>;
> + i2s-controller = <&i2s0>;
> + audio-amplifier = <&max98504>;
> + mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
> + model = "wm5110";
> + samsung,audio-routing =
> + /* Headphone */
> + "HP", "HPOUT1L",
> + "HP", "HPOUT1R",
> +
> + /* Speaker */
> + "SPK", "SPKOUT",
> + "SPKOUT", "HPOUT2L",
> + "SPKOUT", "HPOUT2R",
> +
> + /* Receiver */
> + "RCV", "HPOUT3L",
> + "RCV", "HPOUT3R";
> + status = "okay";
> + };
> +};
> +
> +&adc {
> + vdd-supply = <&ldo3_reg>;
> + status = "okay";
> +
> + thermistor-ap {
> + compatible = "murata,ncp03wf104";
> + pullup-uv = <1800000>;
> + pullup-ohm = <100000>;
> + pulldown-ohm = <0>;
> + io-channels = <&adc 0>;
> + };
> +
> + thermistor-battery {
> + compatible = "murata,ncp03wf104";
> + pullup-uv = <1800000>;
> + pullup-ohm = <100000>;
> + pulldown-ohm = <0>;
> + io-channels = <&adc 1>;
> + #thermal-sensor-cells = <0>;
> + };
> +
> + thermistor-charger {
> + compatible = "murata,ncp03wf104";
> + pullup-uv = <1800000>;
> + pullup-ohm = <100000>;
> + pulldown-ohm = <0>;
> + io-channels = <&adc 2>;
> + };
> +};
> +
> +&cpu0 {
> + cpu-supply = <&buck3_reg>;
> +};
> +
> +&cpu4 {
> + cpu-supply = <&buck2_reg>;
> +};
> +
> +&decon {
> + status = "okay";
> +
> + i80-if-timings {
> + };
> +};
> +
> +&dsi {
> + status = "okay";
> + vddcore-supply = <&ldo6_reg>;
> + vddio-supply = <&ldo7_reg>;
> + samsung,pll-clock-frequency = <24000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&te_irq>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@1 {
> + reg = <1>;
> +
> + dsi_out: endpoint {
> + samsung,burst-clock-frequency = <512000000>;
> + samsung,esc-clock-frequency = <16000000>;
> + };
> + };
> + };
> +};
> +
> +&hsi2c_0 {
> + status = "okay";
> + clock-frequency = <2500000>;
> +
> + s2mps13-pmic@66 {
> + compatible = "samsung,s2mps13-pmic";
> + interrupt-parent = <&gpa0>;
> + interrupts = <7 IRQ_TYPE_NONE>;
> + reg = <0x66>;
> + samsung,s2mps11-wrstbi-ground;
> +
> + s2mps13_osc: clocks {
> + compatible = "samsung,s2mps13-clk";
> + #clock-cells = <1>;
> + clock-output-names = "s2mps13_ap", "s2mps13_cp",
> + "s2mps13_bt";
> + };
> +
> + regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "VDD_ALIVE_0.9V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "VDDQ_MMC2_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "VDD1_E_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: LDO4 {
> + regulator-name = "VDD10_MIF_PLL_1.0V_AP";
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "VDD10_DPLL_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "VDD10_MIPI2L_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "VDD18_MIPI2L_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "VDD18_LLI_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo9_reg: LDO9 {
> + regulator-name = "VDD18_ABB_ETC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "VDD33_USB30_3.0V_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "VDD_INT_M_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "VDD_KFC_M_1.1V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "VDD_G3D_M_0.95V_AP";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <950000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "VDDQ_M1_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "VDDQ_M2_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "VDDQ_EFUSE";
> + regulator-min-microvolt = <1400000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-always-on;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "V_TFLASH_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo18_reg: LDO18 {
> + regulator-name = "V_CODEC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo19_reg: LDO19 {
> + regulator-name = "VDDA_1.8V_COMP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo20_reg: LDO20 {
> + regulator-name = "VCC_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + ldo21_reg: LDO21 {
> + regulator-name = "VT_CAM_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo22_reg: LDO22 {
> + regulator-name = "CAM_IO_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo23_reg: LDO23 {
> + regulator-name = "CAM_SEN_CORE_1.2V_AP";
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo24_reg: LDO24 {
> + regulator-name = "VT_CAM_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo25_reg: LDO25 {
> + regulator-name = "CAM_SEN_A2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo26_reg: LDO26 {
> + regulator-name = "CAM_AF_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo27_reg: LDO27 {
> + regulator-name = "VCC_3.0V_LCD_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo28_reg: LDO28 {
> + regulator-name = "VCC_1.8V_LCD_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo29_reg: LDO29 {
> + regulator-name = "VT_CAM_2.8V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo30_reg: LDO30 {
> + regulator-name = "TSP_AVDD_3.3V_AP";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo31_reg: LDO31 {
> + regulator-name = "TSP_VDD_1.85V_AP";
> + regulator-min-microvolt = <1850000>;
> + regulator-max-microvolt = <1850000>;
> + };
> +
> + ldo32_reg: LDO32 {
> + regulator-name = "VTOUCH_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo33_reg: LDO33 {
> + regulator-name = "VTOUCH_LED_3.3V";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <12500>;
> + };
> +
> + ldo34_reg: LDO34 {
> + regulator-name = "VCC_1.8V_MHL_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <2100000>;
> + };
> +
> + ldo35_reg: LDO35 {
> + regulator-name = "OIS_VM_2.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo36_reg: LDO36 {
> + regulator-name = "VSIL_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + ldo37_reg: LDO37 {
> + regulator-name = "VF_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo38_reg: LDO38 {
> + regulator-name = "VCC_3.0V_MOTOR_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo39_reg: LDO39 {
> + regulator-name = "V_HRM_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo40_reg: LDO40 {
> + regulator-name = "V_HRM_3.3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "VDD_MIF_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "VDD_EGL_1.0V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "VDD_KFC_1.0V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "VDD_INT_0.95V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "VDD_DISP_CAM0_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "VDD_G3D_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "VDD_MEM1_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "VDD_LLDO_1.35V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck9_reg: BUCK9 {
> + regulator-name = "VDD_MLDO_2.0V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck10_reg: BUCK10 {
> + regulator-name = "vdd_mem2";
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&hsi2c_8 {
> + status = "okay";
> +
> + max77843@66 {
> + compatible = "maxim,max77843";
> + interrupt-parent = <&gpa1>;
> + interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
> + reg = <0x66>;
> +
> + muic: max77843-muic {
> + compatible = "maxim,max77843-muic";
> + };
> +
> + regulators {
> + compatible = "maxim,max77843-regulator";
> + safeout1_reg: SAFEOUT1 {
> + regulator-name = "SAFEOUT1";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + safeout2_reg: SAFEOUT2 {
> + regulator-name = "SAFEOUT2";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + charger_reg: CHARGER {
> + regulator-name = "CHARGER";
> + regulator-min-microamp = <100000>;
> + regulator-max-microamp = <3150000>;
> + };
> + };
> +
> + haptic: max77843-haptic {
> + compatible = "maxim,max77843-haptic";
> + haptic-supply = <&ldo38_reg>;
> + pwms = <&pwm 0 33670 0>;
> + pwm-names = "haptic";
> + };
> + };
> +};
> +
> +&i2s0 {
> + status = "okay";
> +};
> +
> +&mshc_0 {
> + status = "okay";
> + num-slots = <1>;
> + non-removable;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 4>;
> + samsung,dw-mshc-ddr-timing = <0 2>;
> + samsung,dw-mshc-hs400-timing = <0 3>;
> + samsung,read-strobe-delay = <90>;
> + fifo-depth = <0x80>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
> + &sd0_bus8 &sd0_rdqs>;
> + bus-width = <8>;
> + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
> + assigned-clock-rates = <800000000>;
> +};
> +
> +&pinctrl_alive {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_alive>;
> +
> + initial_alive: initial-state {
> + PIN(IN, gpa0-0, DOWN, LV1);
> + PIN(IN, gpa0-1, NONE, LV1);
> + PIN(IN, gpa0-2, DOWN, LV1);
> + PIN(IN, gpa0-3, NONE, LV1);
> + PIN(IN, gpa0-4, NONE, LV1);
> + PIN(IN, gpa0-5, DOWN, LV1);
> + PIN(IN, gpa0-6, NONE, LV1);
> + PIN(IN, gpa0-7, NONE, LV1);
> +
> + PIN(IN, gpa1-0, UP, LV1);
> + PIN(IN, gpa1-1, NONE, LV1);
> + PIN(IN, gpa1-2, NONE, LV1);
> + PIN(IN, gpa1-3, DOWN, LV1);
> + PIN(IN, gpa1-4, DOWN, LV1);
> + PIN(IN, gpa1-5, NONE, LV1);
> + PIN(IN, gpa1-6, NONE, LV1);
> + PIN(IN, gpa1-7, NONE, LV1);
> +
> + PIN(IN, gpa2-0, NONE, LV1);
> + PIN(IN, gpa2-1, NONE, LV1);
> + PIN(IN, gpa2-2, NONE, LV1);
> + PIN(IN, gpa2-3, DOWN, LV1);
> + PIN(IN, gpa2-4, NONE, LV1);
> + PIN(IN, gpa2-5, DOWN, LV1);
> + PIN(IN, gpa2-6, DOWN, LV1);
> + PIN(IN, gpa2-7, NONE, LV1);
> +
> + PIN(IN, gpa3-0, DOWN, LV1);
> + PIN(IN, gpa3-1, DOWN, LV1);
> + PIN(IN, gpa3-2, NONE, LV1);
> + PIN(IN, gpa3-3, DOWN, LV1);
> + PIN(IN, gpa3-4, NONE, LV1);
> + PIN(IN, gpa3-5, DOWN, LV1);
> + PIN(IN, gpa3-6, DOWN, LV1);
> + PIN(IN, gpa3-7, DOWN, LV1);
> +
> + PIN(IN, gpf1-0, NONE, LV1);
> + PIN(IN, gpf1-1, NONE, LV1);
> + PIN(IN, gpf1-2, DOWN, LV1);
> + PIN(IN, gpf1-4, UP, LV1);
> + PIN(OUT, gpf1-5, NONE, LV1);
> + PIN(IN, gpf1-6, DOWN, LV1);
> + PIN(IN, gpf1-7, DOWN, LV1);
> +
> + PIN(IN, gpf2-0, DOWN, LV1);
> + PIN(IN, gpf2-1, DOWN, LV1);
> + PIN(IN, gpf2-2, DOWN, LV1);
> + PIN(IN, gpf2-3, DOWN, LV1);
> +
> + PIN(IN, gpf3-0, DOWN, LV1);
> + PIN(IN, gpf3-1, DOWN, LV1);
> + PIN(IN, gpf3-2, NONE, LV1);
> + PIN(IN, gpf3-3, DOWN, LV1);
> +
> + PIN(IN, gpf4-0, DOWN, LV1);
> + PIN(IN, gpf4-1, DOWN, LV1);
> + PIN(IN, gpf4-2, DOWN, LV1);
> + PIN(IN, gpf4-3, DOWN, LV1);
> + PIN(IN, gpf4-4, DOWN, LV1);
> + PIN(IN, gpf4-5, DOWN, LV1);
> + PIN(IN, gpf4-6, DOWN, LV1);
> + PIN(IN, gpf4-7, DOWN, LV1);
> +
> + PIN(IN, gpf5-0, DOWN, LV1);
> + PIN(IN, gpf5-1, DOWN, LV1);
> + PIN(IN, gpf5-2, DOWN, LV1);
> + PIN(IN, gpf5-3, DOWN, LV1);
> + PIN(OUT, gpf5-4, NONE, LV1);
> + PIN(IN, gpf5-5, DOWN, LV1);
> + PIN(IN, gpf5-6, DOWN, LV1);
> + PIN(IN, gpf5-7, DOWN, LV1);
> + };
> +
> + te_irq: te_irq {
> + samsung,pins = "gpf1-3";
> + samsung,pin-function = <0xf>;
> + };
> +};
> +
> +&pinctrl_cpif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_cpif>;
> +
> + initial_cpif: initial-state {
> + PIN(IN, gpv6-0, DOWN, LV1);
> + PIN(IN, gpv6-1, DOWN, LV1);
> + };
> +};
> +
> +&pinctrl_ese {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_ese>;
> +
> + initial_ese: initial-state {
> + PIN(IN, gpj2-0, DOWN, LV1);
> + PIN(IN, gpj2-1, DOWN, LV1);
> + PIN(IN, gpj2-2, DOWN, LV1);
> + };
> +};
> +
> +&pinctrl_fsys {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_fsys>;
> +
> + initial_fsys: initial-state {
> + PIN(IN, gpr3-0, NONE, LV1);
> + PIN(IN, gpr3-1, DOWN, LV1);
> + PIN(IN, gpr3-2, DOWN, LV1);
> + PIN(IN, gpr3-3, DOWN, LV1);
> + PIN(IN, gpr3-7, NONE, LV1);
> + };
> +};
> +
> +&pinctrl_imem {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_imem>;
> +
> + initial_imem: initial-state {
> + PIN(IN, gpf0-0, UP, LV1);
> + PIN(IN, gpf0-1, UP, LV1);
> + PIN(IN, gpf0-2, DOWN, LV1);
> + PIN(IN, gpf0-3, UP, LV1);
> + PIN(IN, gpf0-4, DOWN, LV1);
> + PIN(IN, gpf0-5, NONE, LV1);
> + PIN(IN, gpf0-6, DOWN, LV1);
> + PIN(IN, gpf0-7, UP, LV1);
> + };
> +};
> +
> +&pinctrl_nfc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_nfc>;
> +
> + initial_nfc: initial-state {
> + PIN(IN, gpj0-2, DOWN, LV1);
> + };
> +};
> +
> +&pinctrl_peric {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_peric>;
> +
> + initial_peric: initial-state {
> + PIN(IN, gpv7-0, DOWN, LV1);
> + PIN(IN, gpv7-1, DOWN, LV1);
> + PIN(IN, gpv7-2, NONE, LV1);
> + PIN(IN, gpv7-3, DOWN, LV1);
> + PIN(IN, gpv7-4, DOWN, LV1);
> + PIN(IN, gpv7-5, DOWN, LV1);
> +
> + PIN(IN, gpb0-4, DOWN, LV1);
> +
> + PIN(IN, gpc0-2, DOWN, LV1);
> + PIN(IN, gpc0-5, DOWN, LV1);
> + PIN(IN, gpc0-7, DOWN, LV1);
> +
> + PIN(IN, gpc1-1, DOWN, LV1);
> +
> + PIN(IN, gpc3-4, NONE, LV1);
> + PIN(IN, gpc3-5, NONE, LV1);
> + PIN(IN, gpc3-6, NONE, LV1);
> + PIN(IN, gpc3-7, NONE, LV1);
> +
> + PIN(OUT, gpg0-0, NONE, LV1);
> + PIN(FUNC1, gpg0-1, DOWN, LV1);
> +
> + PIN(IN, gpd2-5, DOWN, LV1);
> +
> + PIN(IN, gpd4-0, NONE, LV1);
> + PIN(IN, gpd4-1, DOWN, LV1);
> + PIN(IN, gpd4-2, DOWN, LV1);
> + PIN(IN, gpd4-3, DOWN, LV1);
> + PIN(IN, gpd4-4, DOWN, LV1);
> +
> + PIN(IN, gpd6-3, DOWN, LV1);
> +
> + PIN(IN, gpd8-1, UP, LV1);
> +
> + PIN(IN, gpg1-0, DOWN, LV1);
> + PIN(IN, gpg1-1, DOWN, LV1);
> + PIN(IN, gpg1-2, DOWN, LV1);
> + PIN(IN, gpg1-3, DOWN, LV1);
> + PIN(IN, gpg1-4, DOWN, LV1);
> +
> + PIN(IN, gpg2-0, DOWN, LV1);
> + PIN(IN, gpg2-1, DOWN, LV1);
> +
> + PIN(IN, gpg3-0, DOWN, LV1);
> + PIN(IN, gpg3-1, DOWN, LV1);
> + PIN(IN, gpg3-5, DOWN, LV1);
> + PIN(IN, gpg3-7, DOWN, LV1);
> + };
> +};
> +
> +&pinctrl_touch {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_touch>;
> +
> + initial_touch: initial-state {
> + PIN(IN, gpj1-2, DOWN, LV1);
> + };
> +};
> +
> +&pwm {
> + pinctrl-0 = <&pwm0_out>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&mic {
> + status = "okay";
> +
> + i80-if-timings {
> + };
> +};
> +
> +&serial_1 {
> + status = "okay";
> +};
> +
> +&serial_3 {
> + assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
> + assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
> + status = "okay";
> +};
> +
> +&spi_1 {
> + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +
> + wm5110: wm5110-codec@0 {
> + compatible = "wlf,wm5110";
> + reg = <0x0>;
> + spi-max-frequency = <20000000>;
> + interrupt-parent = <&gpa0>;
> + interrupts = <4 IRQ_TYPE_NONE>;
> + clocks = <&pmu_system_controller 0>,
> + <&s2mps13_osc S2MPS11_CLK_BT>;
> + clock-names = "mclk1", "mclk2";
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + wlf,micd-detect-debounce = <300>;
> + wlf,micd-bias-start-time = <0x1>;
> + wlf,micd-rate = <0x7>;
> + wlf,micd-dbtime = <0x1>;
> + wlf,micd-force-micbias;
> + wlf,micd-configs = <0x0 1 0>;
> + wlf,hpdet-channel = <1>;
> + wlf,gpsw = <0x1>;
> + wlf,inmode = <2 0 2 0>;
> +
> + wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
> + wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
> +
> + /* core supplies */
> + AVDD-supply = <&ldo18_reg>;
> + DBVDD1-supply = <&ldo18_reg>;
> + CPVDD-supply = <&ldo18_reg>;
> + DBVDD2-supply = <&ldo18_reg>;
> + DBVDD3-supply = <&ldo18_reg>;
> +
> + controller-data {
> + samsung,spi-feedback-delay = <0>;
> + };
> + };
> +};
> +
> +&timer {
> + clock-frequency = <24000000>;
> +};
> +
> +&tmu_atlas0 {
> + vtmu-supply = <&ldo3_reg>;
> + status = "okay";
> +};
> +
> +&tmu_apollo {
> + vtmu-supply = <&ldo3_reg>;
> + status = "okay";
> +};
> +
> +&tmu_g3d {
> + vtmu-supply = <&ldo3_reg>;
> + status = "okay";
> +};
> +
> +&usbdrd30 {
> + vdd33-supply = <&ldo10_reg>;
> + vdd10-supply = <&ldo6_reg>;
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_0 {
> + dr_mode = "otg";
> +};
> +
> +&usbdrd30_phy {
> + vbus-supply = <&safeout1_reg>;
> + status = "okay";
> +};
> +
> +&xxti {
> + clock-frequency = <24000000>;
> +};
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 4/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
@ 2016-11-03 12:26 ` Andi Shyti
0 siblings, 0 replies; 43+ messages in thread
From: Andi Shyti @ 2016-11-03 12:26 UTC (permalink / raw)
To: Chanwoo Choi
Cc: krzk-DgEjT+Ai2ygdnm+yROfE0A, kgene-DgEjT+Ai2ygdnm+yROfE0A,
javier-JPH+aEBZ4P+UEJcrhfAQsw, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
jh80.chung-Sze3O3UU22JBDgjK7y7TUQ,
sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ,
jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ,
inki.dae-Sze3O3UU22JBDgjK7y7TUQ,
jonghwa3.lee-Sze3O3UU22JBDgjK7y7TUQ,
beomho.seo-Sze3O3UU22JBDgjK7y7TUQ,
jaewon02.kim-Sze3O3UU22JBDgjK7y7TUQ,
human.hwang-Sze3O3UU22JBDgjK7y7TUQ,
ideal.song-Sze3O3UU22JBDgjK7y7TUQ,
ingi2.kim-Sze3O3UU22JBDgjK7y7TUQ,
m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ,
a.hajda-Sze3O3UU22JBDgjK7y7TUQ,
s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ,
chanwoo-DgEjT+Ai2ygdnm+yROfE0A
Hi Chanwoo,
Tested-by: Andi Shyti <andi.shyti-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Andi
On Thu, Nov 03, 2016 at 03:39:08PM +0900, Chanwoo Choi wrote:
> This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board.
> This board fully support the all things for mobile target.
>
> This patch supports the following devices:
> 1. basic SoC
> - Initial booting for Samsung Exynos5433 SoC
> - DRAM LPDDR3 (3GB)
> - eMMC (32GB)
> - ARM architecture timer
>
> 2. power management devices
> - Sasmung S2MPS13 PMIC for the power supply
> - CPUFREQ for big.LITTLE cores
> - TMU for big.LITTLE cores and GPU
> - ADC with thermistor to measure the temperature of AP/Battery/Charger
> - Maxim MAX77843 Interface PMIC (MUIC/Haptic/Regulator)
>
> 3. sound devices
> - I2S for sound bus
> - LPASS for sound power control
> - Wolfson WM5110 for sound codec
> - Maxim MAX98504 for speaker amplifier
> - TM2 ASoC Machine device driver node
>
> 3. display devices
> - DECON, DSI and MIC for the panel output
>
> 4. usb devices
> - USB 3.0 DRD (Dual Role Device)
> - USB 3.0 Host controller
>
> 5. storage devices
> - MSHC (Mobile Storage Host Controller) for eMMC device
>
> 6. misc devices
> - gpio-keys (power, volume up/down, home key)
> - PWM (Pulse Width Modulation Timer)
>
> Signed-off-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Jaehoon Chung <jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Seung-Woo Kim <sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Joonyoung Shim <jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Inki Dae <inki.dae-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Jonghwa Lee <jonghwa3.lee-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Beomho Seo <beomho.seo-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Jaewon Kim <jaewon02.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Hyungwon Hwang <human.hwang-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Inha Song <ideal.song-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Ingi kim <ingi2.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Signed-off-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Andrzej Hajda <a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Reviewed-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Reviewed-by: Javier Martinez Canillas <javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>
> ---
> .../bindings/arm/samsung/samsung-boards.txt | 1 +
> arch/arm64/boot/dts/exynos/Makefile | 4 +-
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 974 +++++++++++++++++++++
> 3 files changed, 978 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> index 0ea7f14ef294..339af8b9cdc5 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> @@ -15,6 +15,7 @@ Required root node properties:
> - "samsung,xyref5260" - for Exynos5260-based Samsung board.
> - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
> - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
> + - "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
> - "samsung,sd5v1" - for Exynos5440-based Samsung board.
> - "samsung,ssdk5440" - for Exynos5440-based Samsung board.
>
> diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
> index 50c9b9383cfa..947c750acba1 100644
> --- a/arch/arm64/boot/dts/exynos/Makefile
> +++ b/arch/arm64/boot/dts/exynos/Makefile
> @@ -1,4 +1,6 @@
> -dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb
> +dtb-$(CONFIG_ARCH_EXYNOS) += \
> + exynos5433-tm2.dtb \
> + exynos7-espresso.dtb
>
> always := $(dtb-y)
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> new file mode 100644
> index 000000000000..9ea3f32bae9e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -0,0 +1,974 @@
> +/*
> + * SAMSUNG Exynos5433 TM2 board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2 board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include "exynos5433.dtsi"
> +#include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + model = "Samsung TM2 board";
> + compatible = "samsung,tm2", "samsung,exynos5433";
> +
> + aliases {
> + pinctrl0 = &pinctrl_alive;
> + pinctrl1 = &pinctrl_aud;
> + pinctrl2 = &pinctrl_cpif;
> + pinctrl3 = &pinctrl_ese;
> + pinctrl4 = &pinctrl_finger;
> + pinctrl5 = &pinctrl_fsys;
> + pinctrl6 = &pinctrl_imem;
> + pinctrl7 = &pinctrl_nfc;
> + pinctrl8 = &pinctrl_peric;
> + pinctrl9 = &pinctrl_touch;
> + serial0 = &serial_0;
> + serial1 = &serial_1;
> + serial2 = &serial_2;
> + serial3 = &serial_3;
> + spi0 = &spi_0;
> + spi1 = &spi_1;
> + spi2 = &spi_2;
> + spi3 = &spi_3;
> + spi4 = &spi_4;
> + };
> +
> + chosen {
> + stdout-path = &serial_1;
> + };
> +
> + memory@20000000 {
> + device_type = "memory";
> + reg = <0x0 0x20000000 0x0 0xc0000000>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + power-key {
> + gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + label = "power key";
> + debounce-interval = <10>;
> + };
> +
> + volume-up-key {
> + gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + label = "volume-up key";
> + debounce-interval = <10>;
> + };
> +
> + volume-down-key {
> + gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEDOWN>;
> + label = "volume-down key";
> + debounce-interval = <10>;
> + };
> +
> + homepage-key {
> + gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_MENU>;
> + label = "homepage key";
> + debounce-interval = <10>;
> + };
> + };
> +
> + i2c_max98504: i2c-gpio-0 {
> + compatible = "i2c-gpio";
> + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
> + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
> + i2c-gpio,delay-us = <2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +
> + max98504: max98504@31 {
> + compatible = "maxim,max98504";
> + reg = <0x31>;
> + maxim,rx-path = <1>;
> + maxim,tx-path = <1>;
> + maxim,tx-channel-mask = <3>;
> + maxim,tx-channel-source = <2>;
> + };
> + };
> +
> + sound {
> + compatible = "samsung,tm2-audio";
> + audio-codec = <&wm5110>;
> + i2s-controller = <&i2s0>;
> + audio-amplifier = <&max98504>;
> + mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
> + model = "wm5110";
> + samsung,audio-routing =
> + /* Headphone */
> + "HP", "HPOUT1L",
> + "HP", "HPOUT1R",
> +
> + /* Speaker */
> + "SPK", "SPKOUT",
> + "SPKOUT", "HPOUT2L",
> + "SPKOUT", "HPOUT2R",
> +
> + /* Receiver */
> + "RCV", "HPOUT3L",
> + "RCV", "HPOUT3R";
> + status = "okay";
> + };
> +};
> +
> +&adc {
> + vdd-supply = <&ldo3_reg>;
> + status = "okay";
> +
> + thermistor-ap {
> + compatible = "murata,ncp03wf104";
> + pullup-uv = <1800000>;
> + pullup-ohm = <100000>;
> + pulldown-ohm = <0>;
> + io-channels = <&adc 0>;
> + };
> +
> + thermistor-battery {
> + compatible = "murata,ncp03wf104";
> + pullup-uv = <1800000>;
> + pullup-ohm = <100000>;
> + pulldown-ohm = <0>;
> + io-channels = <&adc 1>;
> + #thermal-sensor-cells = <0>;
> + };
> +
> + thermistor-charger {
> + compatible = "murata,ncp03wf104";
> + pullup-uv = <1800000>;
> + pullup-ohm = <100000>;
> + pulldown-ohm = <0>;
> + io-channels = <&adc 2>;
> + };
> +};
> +
> +&cpu0 {
> + cpu-supply = <&buck3_reg>;
> +};
> +
> +&cpu4 {
> + cpu-supply = <&buck2_reg>;
> +};
> +
> +&decon {
> + status = "okay";
> +
> + i80-if-timings {
> + };
> +};
> +
> +&dsi {
> + status = "okay";
> + vddcore-supply = <&ldo6_reg>;
> + vddio-supply = <&ldo7_reg>;
> + samsung,pll-clock-frequency = <24000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&te_irq>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@1 {
> + reg = <1>;
> +
> + dsi_out: endpoint {
> + samsung,burst-clock-frequency = <512000000>;
> + samsung,esc-clock-frequency = <16000000>;
> + };
> + };
> + };
> +};
> +
> +&hsi2c_0 {
> + status = "okay";
> + clock-frequency = <2500000>;
> +
> + s2mps13-pmic@66 {
> + compatible = "samsung,s2mps13-pmic";
> + interrupt-parent = <&gpa0>;
> + interrupts = <7 IRQ_TYPE_NONE>;
> + reg = <0x66>;
> + samsung,s2mps11-wrstbi-ground;
> +
> + s2mps13_osc: clocks {
> + compatible = "samsung,s2mps13-clk";
> + #clock-cells = <1>;
> + clock-output-names = "s2mps13_ap", "s2mps13_cp",
> + "s2mps13_bt";
> + };
> +
> + regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "VDD_ALIVE_0.9V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "VDDQ_MMC2_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "VDD1_E_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: LDO4 {
> + regulator-name = "VDD10_MIF_PLL_1.0V_AP";
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "VDD10_DPLL_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "VDD10_MIPI2L_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "VDD18_MIPI2L_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "VDD18_LLI_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo9_reg: LDO9 {
> + regulator-name = "VDD18_ABB_ETC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "VDD33_USB30_3.0V_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "VDD_INT_M_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "VDD_KFC_M_1.1V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "VDD_G3D_M_0.95V_AP";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <950000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "VDDQ_M1_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "VDDQ_M2_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "VDDQ_EFUSE";
> + regulator-min-microvolt = <1400000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-always-on;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "V_TFLASH_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo18_reg: LDO18 {
> + regulator-name = "V_CODEC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo19_reg: LDO19 {
> + regulator-name = "VDDA_1.8V_COMP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo20_reg: LDO20 {
> + regulator-name = "VCC_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + ldo21_reg: LDO21 {
> + regulator-name = "VT_CAM_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo22_reg: LDO22 {
> + regulator-name = "CAM_IO_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo23_reg: LDO23 {
> + regulator-name = "CAM_SEN_CORE_1.2V_AP";
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo24_reg: LDO24 {
> + regulator-name = "VT_CAM_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo25_reg: LDO25 {
> + regulator-name = "CAM_SEN_A2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo26_reg: LDO26 {
> + regulator-name = "CAM_AF_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo27_reg: LDO27 {
> + regulator-name = "VCC_3.0V_LCD_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo28_reg: LDO28 {
> + regulator-name = "VCC_1.8V_LCD_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo29_reg: LDO29 {
> + regulator-name = "VT_CAM_2.8V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo30_reg: LDO30 {
> + regulator-name = "TSP_AVDD_3.3V_AP";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo31_reg: LDO31 {
> + regulator-name = "TSP_VDD_1.85V_AP";
> + regulator-min-microvolt = <1850000>;
> + regulator-max-microvolt = <1850000>;
> + };
> +
> + ldo32_reg: LDO32 {
> + regulator-name = "VTOUCH_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo33_reg: LDO33 {
> + regulator-name = "VTOUCH_LED_3.3V";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <12500>;
> + };
> +
> + ldo34_reg: LDO34 {
> + regulator-name = "VCC_1.8V_MHL_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <2100000>;
> + };
> +
> + ldo35_reg: LDO35 {
> + regulator-name = "OIS_VM_2.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo36_reg: LDO36 {
> + regulator-name = "VSIL_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + ldo37_reg: LDO37 {
> + regulator-name = "VF_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo38_reg: LDO38 {
> + regulator-name = "VCC_3.0V_MOTOR_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo39_reg: LDO39 {
> + regulator-name = "V_HRM_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo40_reg: LDO40 {
> + regulator-name = "V_HRM_3.3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "VDD_MIF_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "VDD_EGL_1.0V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "VDD_KFC_1.0V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "VDD_INT_0.95V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "VDD_DISP_CAM0_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "VDD_G3D_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "VDD_MEM1_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "VDD_LLDO_1.35V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck9_reg: BUCK9 {
> + regulator-name = "VDD_MLDO_2.0V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck10_reg: BUCK10 {
> + regulator-name = "vdd_mem2";
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&hsi2c_8 {
> + status = "okay";
> +
> + max77843@66 {
> + compatible = "maxim,max77843";
> + interrupt-parent = <&gpa1>;
> + interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
> + reg = <0x66>;
> +
> + muic: max77843-muic {
> + compatible = "maxim,max77843-muic";
> + };
> +
> + regulators {
> + compatible = "maxim,max77843-regulator";
> + safeout1_reg: SAFEOUT1 {
> + regulator-name = "SAFEOUT1";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + safeout2_reg: SAFEOUT2 {
> + regulator-name = "SAFEOUT2";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + charger_reg: CHARGER {
> + regulator-name = "CHARGER";
> + regulator-min-microamp = <100000>;
> + regulator-max-microamp = <3150000>;
> + };
> + };
> +
> + haptic: max77843-haptic {
> + compatible = "maxim,max77843-haptic";
> + haptic-supply = <&ldo38_reg>;
> + pwms = <&pwm 0 33670 0>;
> + pwm-names = "haptic";
> + };
> + };
> +};
> +
> +&i2s0 {
> + status = "okay";
> +};
> +
> +&mshc_0 {
> + status = "okay";
> + num-slots = <1>;
> + non-removable;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 4>;
> + samsung,dw-mshc-ddr-timing = <0 2>;
> + samsung,dw-mshc-hs400-timing = <0 3>;
> + samsung,read-strobe-delay = <90>;
> + fifo-depth = <0x80>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
> + &sd0_bus8 &sd0_rdqs>;
> + bus-width = <8>;
> + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
> + assigned-clock-rates = <800000000>;
> +};
> +
> +&pinctrl_alive {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_alive>;
> +
> + initial_alive: initial-state {
> + PIN(IN, gpa0-0, DOWN, LV1);
> + PIN(IN, gpa0-1, NONE, LV1);
> + PIN(IN, gpa0-2, DOWN, LV1);
> + PIN(IN, gpa0-3, NONE, LV1);
> + PIN(IN, gpa0-4, NONE, LV1);
> + PIN(IN, gpa0-5, DOWN, LV1);
> + PIN(IN, gpa0-6, NONE, LV1);
> + PIN(IN, gpa0-7, NONE, LV1);
> +
> + PIN(IN, gpa1-0, UP, LV1);
> + PIN(IN, gpa1-1, NONE, LV1);
> + PIN(IN, gpa1-2, NONE, LV1);
> + PIN(IN, gpa1-3, DOWN, LV1);
> + PIN(IN, gpa1-4, DOWN, LV1);
> + PIN(IN, gpa1-5, NONE, LV1);
> + PIN(IN, gpa1-6, NONE, LV1);
> + PIN(IN, gpa1-7, NONE, LV1);
> +
> + PIN(IN, gpa2-0, NONE, LV1);
> + PIN(IN, gpa2-1, NONE, LV1);
> + PIN(IN, gpa2-2, NONE, LV1);
> + PIN(IN, gpa2-3, DOWN, LV1);
> + PIN(IN, gpa2-4, NONE, LV1);
> + PIN(IN, gpa2-5, DOWN, LV1);
> + PIN(IN, gpa2-6, DOWN, LV1);
> + PIN(IN, gpa2-7, NONE, LV1);
> +
> + PIN(IN, gpa3-0, DOWN, LV1);
> + PIN(IN, gpa3-1, DOWN, LV1);
> + PIN(IN, gpa3-2, NONE, LV1);
> + PIN(IN, gpa3-3, DOWN, LV1);
> + PIN(IN, gpa3-4, NONE, LV1);
> + PIN(IN, gpa3-5, DOWN, LV1);
> + PIN(IN, gpa3-6, DOWN, LV1);
> + PIN(IN, gpa3-7, DOWN, LV1);
> +
> + PIN(IN, gpf1-0, NONE, LV1);
> + PIN(IN, gpf1-1, NONE, LV1);
> + PIN(IN, gpf1-2, DOWN, LV1);
> + PIN(IN, gpf1-4, UP, LV1);
> + PIN(OUT, gpf1-5, NONE, LV1);
> + PIN(IN, gpf1-6, DOWN, LV1);
> + PIN(IN, gpf1-7, DOWN, LV1);
> +
> + PIN(IN, gpf2-0, DOWN, LV1);
> + PIN(IN, gpf2-1, DOWN, LV1);
> + PIN(IN, gpf2-2, DOWN, LV1);
> + PIN(IN, gpf2-3, DOWN, LV1);
> +
> + PIN(IN, gpf3-0, DOWN, LV1);
> + PIN(IN, gpf3-1, DOWN, LV1);
> + PIN(IN, gpf3-2, NONE, LV1);
> + PIN(IN, gpf3-3, DOWN, LV1);
> +
> + PIN(IN, gpf4-0, DOWN, LV1);
> + PIN(IN, gpf4-1, DOWN, LV1);
> + PIN(IN, gpf4-2, DOWN, LV1);
> + PIN(IN, gpf4-3, DOWN, LV1);
> + PIN(IN, gpf4-4, DOWN, LV1);
> + PIN(IN, gpf4-5, DOWN, LV1);
> + PIN(IN, gpf4-6, DOWN, LV1);
> + PIN(IN, gpf4-7, DOWN, LV1);
> +
> + PIN(IN, gpf5-0, DOWN, LV1);
> + PIN(IN, gpf5-1, DOWN, LV1);
> + PIN(IN, gpf5-2, DOWN, LV1);
> + PIN(IN, gpf5-3, DOWN, LV1);
> + PIN(OUT, gpf5-4, NONE, LV1);
> + PIN(IN, gpf5-5, DOWN, LV1);
> + PIN(IN, gpf5-6, DOWN, LV1);
> + PIN(IN, gpf5-7, DOWN, LV1);
> + };
> +
> + te_irq: te_irq {
> + samsung,pins = "gpf1-3";
> + samsung,pin-function = <0xf>;
> + };
> +};
> +
> +&pinctrl_cpif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_cpif>;
> +
> + initial_cpif: initial-state {
> + PIN(IN, gpv6-0, DOWN, LV1);
> + PIN(IN, gpv6-1, DOWN, LV1);
> + };
> +};
> +
> +&pinctrl_ese {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_ese>;
> +
> + initial_ese: initial-state {
> + PIN(IN, gpj2-0, DOWN, LV1);
> + PIN(IN, gpj2-1, DOWN, LV1);
> + PIN(IN, gpj2-2, DOWN, LV1);
> + };
> +};
> +
> +&pinctrl_fsys {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_fsys>;
> +
> + initial_fsys: initial-state {
> + PIN(IN, gpr3-0, NONE, LV1);
> + PIN(IN, gpr3-1, DOWN, LV1);
> + PIN(IN, gpr3-2, DOWN, LV1);
> + PIN(IN, gpr3-3, DOWN, LV1);
> + PIN(IN, gpr3-7, NONE, LV1);
> + };
> +};
> +
> +&pinctrl_imem {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_imem>;
> +
> + initial_imem: initial-state {
> + PIN(IN, gpf0-0, UP, LV1);
> + PIN(IN, gpf0-1, UP, LV1);
> + PIN(IN, gpf0-2, DOWN, LV1);
> + PIN(IN, gpf0-3, UP, LV1);
> + PIN(IN, gpf0-4, DOWN, LV1);
> + PIN(IN, gpf0-5, NONE, LV1);
> + PIN(IN, gpf0-6, DOWN, LV1);
> + PIN(IN, gpf0-7, UP, LV1);
> + };
> +};
> +
> +&pinctrl_nfc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_nfc>;
> +
> + initial_nfc: initial-state {
> + PIN(IN, gpj0-2, DOWN, LV1);
> + };
> +};
> +
> +&pinctrl_peric {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_peric>;
> +
> + initial_peric: initial-state {
> + PIN(IN, gpv7-0, DOWN, LV1);
> + PIN(IN, gpv7-1, DOWN, LV1);
> + PIN(IN, gpv7-2, NONE, LV1);
> + PIN(IN, gpv7-3, DOWN, LV1);
> + PIN(IN, gpv7-4, DOWN, LV1);
> + PIN(IN, gpv7-5, DOWN, LV1);
> +
> + PIN(IN, gpb0-4, DOWN, LV1);
> +
> + PIN(IN, gpc0-2, DOWN, LV1);
> + PIN(IN, gpc0-5, DOWN, LV1);
> + PIN(IN, gpc0-7, DOWN, LV1);
> +
> + PIN(IN, gpc1-1, DOWN, LV1);
> +
> + PIN(IN, gpc3-4, NONE, LV1);
> + PIN(IN, gpc3-5, NONE, LV1);
> + PIN(IN, gpc3-6, NONE, LV1);
> + PIN(IN, gpc3-7, NONE, LV1);
> +
> + PIN(OUT, gpg0-0, NONE, LV1);
> + PIN(FUNC1, gpg0-1, DOWN, LV1);
> +
> + PIN(IN, gpd2-5, DOWN, LV1);
> +
> + PIN(IN, gpd4-0, NONE, LV1);
> + PIN(IN, gpd4-1, DOWN, LV1);
> + PIN(IN, gpd4-2, DOWN, LV1);
> + PIN(IN, gpd4-3, DOWN, LV1);
> + PIN(IN, gpd4-4, DOWN, LV1);
> +
> + PIN(IN, gpd6-3, DOWN, LV1);
> +
> + PIN(IN, gpd8-1, UP, LV1);
> +
> + PIN(IN, gpg1-0, DOWN, LV1);
> + PIN(IN, gpg1-1, DOWN, LV1);
> + PIN(IN, gpg1-2, DOWN, LV1);
> + PIN(IN, gpg1-3, DOWN, LV1);
> + PIN(IN, gpg1-4, DOWN, LV1);
> +
> + PIN(IN, gpg2-0, DOWN, LV1);
> + PIN(IN, gpg2-1, DOWN, LV1);
> +
> + PIN(IN, gpg3-0, DOWN, LV1);
> + PIN(IN, gpg3-1, DOWN, LV1);
> + PIN(IN, gpg3-5, DOWN, LV1);
> + PIN(IN, gpg3-7, DOWN, LV1);
> + };
> +};
> +
> +&pinctrl_touch {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_touch>;
> +
> + initial_touch: initial-state {
> + PIN(IN, gpj1-2, DOWN, LV1);
> + };
> +};
> +
> +&pwm {
> + pinctrl-0 = <&pwm0_out>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&mic {
> + status = "okay";
> +
> + i80-if-timings {
> + };
> +};
> +
> +&serial_1 {
> + status = "okay";
> +};
> +
> +&serial_3 {
> + assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
> + assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
> + status = "okay";
> +};
> +
> +&spi_1 {
> + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +
> + wm5110: wm5110-codec@0 {
> + compatible = "wlf,wm5110";
> + reg = <0x0>;
> + spi-max-frequency = <20000000>;
> + interrupt-parent = <&gpa0>;
> + interrupts = <4 IRQ_TYPE_NONE>;
> + clocks = <&pmu_system_controller 0>,
> + <&s2mps13_osc S2MPS11_CLK_BT>;
> + clock-names = "mclk1", "mclk2";
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + wlf,micd-detect-debounce = <300>;
> + wlf,micd-bias-start-time = <0x1>;
> + wlf,micd-rate = <0x7>;
> + wlf,micd-dbtime = <0x1>;
> + wlf,micd-force-micbias;
> + wlf,micd-configs = <0x0 1 0>;
> + wlf,hpdet-channel = <1>;
> + wlf,gpsw = <0x1>;
> + wlf,inmode = <2 0 2 0>;
> +
> + wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
> + wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
> +
> + /* core supplies */
> + AVDD-supply = <&ldo18_reg>;
> + DBVDD1-supply = <&ldo18_reg>;
> + CPVDD-supply = <&ldo18_reg>;
> + DBVDD2-supply = <&ldo18_reg>;
> + DBVDD3-supply = <&ldo18_reg>;
> +
> + controller-data {
> + samsung,spi-feedback-delay = <0>;
> + };
> + };
> +};
> +
> +&timer {
> + clock-frequency = <24000000>;
> +};
> +
> +&tmu_atlas0 {
> + vtmu-supply = <&ldo3_reg>;
> + status = "okay";
> +};
> +
> +&tmu_apollo {
> + vtmu-supply = <&ldo3_reg>;
> + status = "okay";
> +};
> +
> +&tmu_g3d {
> + vtmu-supply = <&ldo3_reg>;
> + status = "okay";
> +};
> +
> +&usbdrd30 {
> + vdd33-supply = <&ldo10_reg>;
> + vdd10-supply = <&ldo6_reg>;
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_0 {
> + dr_mode = "otg";
> +};
> +
> +&usbdrd30_phy {
> + vbus-supply = <&safeout1_reg>;
> + status = "okay";
> +};
> +
> +&xxti {
> + clock-frequency = <24000000>;
> +};
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 4/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
@ 2016-11-03 12:26 ` Andi Shyti
0 siblings, 0 replies; 43+ messages in thread
From: Andi Shyti @ 2016-11-03 12:26 UTC (permalink / raw)
To: linux-arm-kernel
Hi Chanwoo,
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Andi
On Thu, Nov 03, 2016 at 03:39:08PM +0900, Chanwoo Choi wrote:
> This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board.
> This board fully support the all things for mobile target.
>
> This patch supports the following devices:
> 1. basic SoC
> - Initial booting for Samsung Exynos5433 SoC
> - DRAM LPDDR3 (3GB)
> - eMMC (32GB)
> - ARM architecture timer
>
> 2. power management devices
> - Sasmung S2MPS13 PMIC for the power supply
> - CPUFREQ for big.LITTLE cores
> - TMU for big.LITTLE cores and GPU
> - ADC with thermistor to measure the temperature of AP/Battery/Charger
> - Maxim MAX77843 Interface PMIC (MUIC/Haptic/Regulator)
>
> 3. sound devices
> - I2S for sound bus
> - LPASS for sound power control
> - Wolfson WM5110 for sound codec
> - Maxim MAX98504 for speaker amplifier
> - TM2 ASoC Machine device driver node
>
> 3. display devices
> - DECON, DSI and MIC for the panel output
>
> 4. usb devices
> - USB 3.0 DRD (Dual Role Device)
> - USB 3.0 Host controller
>
> 5. storage devices
> - MSHC (Mobile Storage Host Controller) for eMMC device
>
> 6. misc devices
> - gpio-keys (power, volume up/down, home key)
> - PWM (Pulse Width Modulation Timer)
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> .../bindings/arm/samsung/samsung-boards.txt | 1 +
> arch/arm64/boot/dts/exynos/Makefile | 4 +-
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 974 +++++++++++++++++++++
> 3 files changed, 978 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> index 0ea7f14ef294..339af8b9cdc5 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> @@ -15,6 +15,7 @@ Required root node properties:
> - "samsung,xyref5260" - for Exynos5260-based Samsung board.
> - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
> - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
> + - "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
> - "samsung,sd5v1" - for Exynos5440-based Samsung board.
> - "samsung,ssdk5440" - for Exynos5440-based Samsung board.
>
> diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
> index 50c9b9383cfa..947c750acba1 100644
> --- a/arch/arm64/boot/dts/exynos/Makefile
> +++ b/arch/arm64/boot/dts/exynos/Makefile
> @@ -1,4 +1,6 @@
> -dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb
> +dtb-$(CONFIG_ARCH_EXYNOS) += \
> + exynos5433-tm2.dtb \
> + exynos7-espresso.dtb
>
> always := $(dtb-y)
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> new file mode 100644
> index 000000000000..9ea3f32bae9e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -0,0 +1,974 @@
> +/*
> + * SAMSUNG Exynos5433 TM2 board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2 board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include "exynos5433.dtsi"
> +#include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + model = "Samsung TM2 board";
> + compatible = "samsung,tm2", "samsung,exynos5433";
> +
> + aliases {
> + pinctrl0 = &pinctrl_alive;
> + pinctrl1 = &pinctrl_aud;
> + pinctrl2 = &pinctrl_cpif;
> + pinctrl3 = &pinctrl_ese;
> + pinctrl4 = &pinctrl_finger;
> + pinctrl5 = &pinctrl_fsys;
> + pinctrl6 = &pinctrl_imem;
> + pinctrl7 = &pinctrl_nfc;
> + pinctrl8 = &pinctrl_peric;
> + pinctrl9 = &pinctrl_touch;
> + serial0 = &serial_0;
> + serial1 = &serial_1;
> + serial2 = &serial_2;
> + serial3 = &serial_3;
> + spi0 = &spi_0;
> + spi1 = &spi_1;
> + spi2 = &spi_2;
> + spi3 = &spi_3;
> + spi4 = &spi_4;
> + };
> +
> + chosen {
> + stdout-path = &serial_1;
> + };
> +
> + memory at 20000000 {
> + device_type = "memory";
> + reg = <0x0 0x20000000 0x0 0xc0000000>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + power-key {
> + gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + label = "power key";
> + debounce-interval = <10>;
> + };
> +
> + volume-up-key {
> + gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + label = "volume-up key";
> + debounce-interval = <10>;
> + };
> +
> + volume-down-key {
> + gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEDOWN>;
> + label = "volume-down key";
> + debounce-interval = <10>;
> + };
> +
> + homepage-key {
> + gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_MENU>;
> + label = "homepage key";
> + debounce-interval = <10>;
> + };
> + };
> +
> + i2c_max98504: i2c-gpio-0 {
> + compatible = "i2c-gpio";
> + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
> + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
> + i2c-gpio,delay-us = <2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +
> + max98504: max98504 at 31 {
> + compatible = "maxim,max98504";
> + reg = <0x31>;
> + maxim,rx-path = <1>;
> + maxim,tx-path = <1>;
> + maxim,tx-channel-mask = <3>;
> + maxim,tx-channel-source = <2>;
> + };
> + };
> +
> + sound {
> + compatible = "samsung,tm2-audio";
> + audio-codec = <&wm5110>;
> + i2s-controller = <&i2s0>;
> + audio-amplifier = <&max98504>;
> + mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
> + model = "wm5110";
> + samsung,audio-routing =
> + /* Headphone */
> + "HP", "HPOUT1L",
> + "HP", "HPOUT1R",
> +
> + /* Speaker */
> + "SPK", "SPKOUT",
> + "SPKOUT", "HPOUT2L",
> + "SPKOUT", "HPOUT2R",
> +
> + /* Receiver */
> + "RCV", "HPOUT3L",
> + "RCV", "HPOUT3R";
> + status = "okay";
> + };
> +};
> +
> +&adc {
> + vdd-supply = <&ldo3_reg>;
> + status = "okay";
> +
> + thermistor-ap {
> + compatible = "murata,ncp03wf104";
> + pullup-uv = <1800000>;
> + pullup-ohm = <100000>;
> + pulldown-ohm = <0>;
> + io-channels = <&adc 0>;
> + };
> +
> + thermistor-battery {
> + compatible = "murata,ncp03wf104";
> + pullup-uv = <1800000>;
> + pullup-ohm = <100000>;
> + pulldown-ohm = <0>;
> + io-channels = <&adc 1>;
> + #thermal-sensor-cells = <0>;
> + };
> +
> + thermistor-charger {
> + compatible = "murata,ncp03wf104";
> + pullup-uv = <1800000>;
> + pullup-ohm = <100000>;
> + pulldown-ohm = <0>;
> + io-channels = <&adc 2>;
> + };
> +};
> +
> +&cpu0 {
> + cpu-supply = <&buck3_reg>;
> +};
> +
> +&cpu4 {
> + cpu-supply = <&buck2_reg>;
> +};
> +
> +&decon {
> + status = "okay";
> +
> + i80-if-timings {
> + };
> +};
> +
> +&dsi {
> + status = "okay";
> + vddcore-supply = <&ldo6_reg>;
> + vddio-supply = <&ldo7_reg>;
> + samsung,pll-clock-frequency = <24000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&te_irq>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 1 {
> + reg = <1>;
> +
> + dsi_out: endpoint {
> + samsung,burst-clock-frequency = <512000000>;
> + samsung,esc-clock-frequency = <16000000>;
> + };
> + };
> + };
> +};
> +
> +&hsi2c_0 {
> + status = "okay";
> + clock-frequency = <2500000>;
> +
> + s2mps13-pmic at 66 {
> + compatible = "samsung,s2mps13-pmic";
> + interrupt-parent = <&gpa0>;
> + interrupts = <7 IRQ_TYPE_NONE>;
> + reg = <0x66>;
> + samsung,s2mps11-wrstbi-ground;
> +
> + s2mps13_osc: clocks {
> + compatible = "samsung,s2mps13-clk";
> + #clock-cells = <1>;
> + clock-output-names = "s2mps13_ap", "s2mps13_cp",
> + "s2mps13_bt";
> + };
> +
> + regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "VDD_ALIVE_0.9V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "VDDQ_MMC2_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "VDD1_E_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: LDO4 {
> + regulator-name = "VDD10_MIF_PLL_1.0V_AP";
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "VDD10_DPLL_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "VDD10_MIPI2L_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "VDD18_MIPI2L_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "VDD18_LLI_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo9_reg: LDO9 {
> + regulator-name = "VDD18_ABB_ETC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "VDD33_USB30_3.0V_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "VDD_INT_M_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "VDD_KFC_M_1.1V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "VDD_G3D_M_0.95V_AP";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <950000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "VDDQ_M1_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "VDDQ_M2_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "VDDQ_EFUSE";
> + regulator-min-microvolt = <1400000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-always-on;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "V_TFLASH_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo18_reg: LDO18 {
> + regulator-name = "V_CODEC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo19_reg: LDO19 {
> + regulator-name = "VDDA_1.8V_COMP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo20_reg: LDO20 {
> + regulator-name = "VCC_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + ldo21_reg: LDO21 {
> + regulator-name = "VT_CAM_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo22_reg: LDO22 {
> + regulator-name = "CAM_IO_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo23_reg: LDO23 {
> + regulator-name = "CAM_SEN_CORE_1.2V_AP";
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo24_reg: LDO24 {
> + regulator-name = "VT_CAM_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo25_reg: LDO25 {
> + regulator-name = "CAM_SEN_A2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo26_reg: LDO26 {
> + regulator-name = "CAM_AF_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo27_reg: LDO27 {
> + regulator-name = "VCC_3.0V_LCD_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo28_reg: LDO28 {
> + regulator-name = "VCC_1.8V_LCD_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo29_reg: LDO29 {
> + regulator-name = "VT_CAM_2.8V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo30_reg: LDO30 {
> + regulator-name = "TSP_AVDD_3.3V_AP";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo31_reg: LDO31 {
> + regulator-name = "TSP_VDD_1.85V_AP";
> + regulator-min-microvolt = <1850000>;
> + regulator-max-microvolt = <1850000>;
> + };
> +
> + ldo32_reg: LDO32 {
> + regulator-name = "VTOUCH_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo33_reg: LDO33 {
> + regulator-name = "VTOUCH_LED_3.3V";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <12500>;
> + };
> +
> + ldo34_reg: LDO34 {
> + regulator-name = "VCC_1.8V_MHL_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <2100000>;
> + };
> +
> + ldo35_reg: LDO35 {
> + regulator-name = "OIS_VM_2.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo36_reg: LDO36 {
> + regulator-name = "VSIL_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + ldo37_reg: LDO37 {
> + regulator-name = "VF_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo38_reg: LDO38 {
> + regulator-name = "VCC_3.0V_MOTOR_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo39_reg: LDO39 {
> + regulator-name = "V_HRM_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo40_reg: LDO40 {
> + regulator-name = "V_HRM_3.3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "VDD_MIF_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "VDD_EGL_1.0V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "VDD_KFC_1.0V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "VDD_INT_0.95V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "VDD_DISP_CAM0_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "VDD_G3D_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "VDD_MEM1_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "VDD_LLDO_1.35V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck9_reg: BUCK9 {
> + regulator-name = "VDD_MLDO_2.0V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck10_reg: BUCK10 {
> + regulator-name = "vdd_mem2";
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&hsi2c_8 {
> + status = "okay";
> +
> + max77843 at 66 {
> + compatible = "maxim,max77843";
> + interrupt-parent = <&gpa1>;
> + interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
> + reg = <0x66>;
> +
> + muic: max77843-muic {
> + compatible = "maxim,max77843-muic";
> + };
> +
> + regulators {
> + compatible = "maxim,max77843-regulator";
> + safeout1_reg: SAFEOUT1 {
> + regulator-name = "SAFEOUT1";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + safeout2_reg: SAFEOUT2 {
> + regulator-name = "SAFEOUT2";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + charger_reg: CHARGER {
> + regulator-name = "CHARGER";
> + regulator-min-microamp = <100000>;
> + regulator-max-microamp = <3150000>;
> + };
> + };
> +
> + haptic: max77843-haptic {
> + compatible = "maxim,max77843-haptic";
> + haptic-supply = <&ldo38_reg>;
> + pwms = <&pwm 0 33670 0>;
> + pwm-names = "haptic";
> + };
> + };
> +};
> +
> +&i2s0 {
> + status = "okay";
> +};
> +
> +&mshc_0 {
> + status = "okay";
> + num-slots = <1>;
> + non-removable;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 4>;
> + samsung,dw-mshc-ddr-timing = <0 2>;
> + samsung,dw-mshc-hs400-timing = <0 3>;
> + samsung,read-strobe-delay = <90>;
> + fifo-depth = <0x80>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
> + &sd0_bus8 &sd0_rdqs>;
> + bus-width = <8>;
> + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
> + assigned-clock-rates = <800000000>;
> +};
> +
> +&pinctrl_alive {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_alive>;
> +
> + initial_alive: initial-state {
> + PIN(IN, gpa0-0, DOWN, LV1);
> + PIN(IN, gpa0-1, NONE, LV1);
> + PIN(IN, gpa0-2, DOWN, LV1);
> + PIN(IN, gpa0-3, NONE, LV1);
> + PIN(IN, gpa0-4, NONE, LV1);
> + PIN(IN, gpa0-5, DOWN, LV1);
> + PIN(IN, gpa0-6, NONE, LV1);
> + PIN(IN, gpa0-7, NONE, LV1);
> +
> + PIN(IN, gpa1-0, UP, LV1);
> + PIN(IN, gpa1-1, NONE, LV1);
> + PIN(IN, gpa1-2, NONE, LV1);
> + PIN(IN, gpa1-3, DOWN, LV1);
> + PIN(IN, gpa1-4, DOWN, LV1);
> + PIN(IN, gpa1-5, NONE, LV1);
> + PIN(IN, gpa1-6, NONE, LV1);
> + PIN(IN, gpa1-7, NONE, LV1);
> +
> + PIN(IN, gpa2-0, NONE, LV1);
> + PIN(IN, gpa2-1, NONE, LV1);
> + PIN(IN, gpa2-2, NONE, LV1);
> + PIN(IN, gpa2-3, DOWN, LV1);
> + PIN(IN, gpa2-4, NONE, LV1);
> + PIN(IN, gpa2-5, DOWN, LV1);
> + PIN(IN, gpa2-6, DOWN, LV1);
> + PIN(IN, gpa2-7, NONE, LV1);
> +
> + PIN(IN, gpa3-0, DOWN, LV1);
> + PIN(IN, gpa3-1, DOWN, LV1);
> + PIN(IN, gpa3-2, NONE, LV1);
> + PIN(IN, gpa3-3, DOWN, LV1);
> + PIN(IN, gpa3-4, NONE, LV1);
> + PIN(IN, gpa3-5, DOWN, LV1);
> + PIN(IN, gpa3-6, DOWN, LV1);
> + PIN(IN, gpa3-7, DOWN, LV1);
> +
> + PIN(IN, gpf1-0, NONE, LV1);
> + PIN(IN, gpf1-1, NONE, LV1);
> + PIN(IN, gpf1-2, DOWN, LV1);
> + PIN(IN, gpf1-4, UP, LV1);
> + PIN(OUT, gpf1-5, NONE, LV1);
> + PIN(IN, gpf1-6, DOWN, LV1);
> + PIN(IN, gpf1-7, DOWN, LV1);
> +
> + PIN(IN, gpf2-0, DOWN, LV1);
> + PIN(IN, gpf2-1, DOWN, LV1);
> + PIN(IN, gpf2-2, DOWN, LV1);
> + PIN(IN, gpf2-3, DOWN, LV1);
> +
> + PIN(IN, gpf3-0, DOWN, LV1);
> + PIN(IN, gpf3-1, DOWN, LV1);
> + PIN(IN, gpf3-2, NONE, LV1);
> + PIN(IN, gpf3-3, DOWN, LV1);
> +
> + PIN(IN, gpf4-0, DOWN, LV1);
> + PIN(IN, gpf4-1, DOWN, LV1);
> + PIN(IN, gpf4-2, DOWN, LV1);
> + PIN(IN, gpf4-3, DOWN, LV1);
> + PIN(IN, gpf4-4, DOWN, LV1);
> + PIN(IN, gpf4-5, DOWN, LV1);
> + PIN(IN, gpf4-6, DOWN, LV1);
> + PIN(IN, gpf4-7, DOWN, LV1);
> +
> + PIN(IN, gpf5-0, DOWN, LV1);
> + PIN(IN, gpf5-1, DOWN, LV1);
> + PIN(IN, gpf5-2, DOWN, LV1);
> + PIN(IN, gpf5-3, DOWN, LV1);
> + PIN(OUT, gpf5-4, NONE, LV1);
> + PIN(IN, gpf5-5, DOWN, LV1);
> + PIN(IN, gpf5-6, DOWN, LV1);
> + PIN(IN, gpf5-7, DOWN, LV1);
> + };
> +
> + te_irq: te_irq {
> + samsung,pins = "gpf1-3";
> + samsung,pin-function = <0xf>;
> + };
> +};
> +
> +&pinctrl_cpif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_cpif>;
> +
> + initial_cpif: initial-state {
> + PIN(IN, gpv6-0, DOWN, LV1);
> + PIN(IN, gpv6-1, DOWN, LV1);
> + };
> +};
> +
> +&pinctrl_ese {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_ese>;
> +
> + initial_ese: initial-state {
> + PIN(IN, gpj2-0, DOWN, LV1);
> + PIN(IN, gpj2-1, DOWN, LV1);
> + PIN(IN, gpj2-2, DOWN, LV1);
> + };
> +};
> +
> +&pinctrl_fsys {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_fsys>;
> +
> + initial_fsys: initial-state {
> + PIN(IN, gpr3-0, NONE, LV1);
> + PIN(IN, gpr3-1, DOWN, LV1);
> + PIN(IN, gpr3-2, DOWN, LV1);
> + PIN(IN, gpr3-3, DOWN, LV1);
> + PIN(IN, gpr3-7, NONE, LV1);
> + };
> +};
> +
> +&pinctrl_imem {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_imem>;
> +
> + initial_imem: initial-state {
> + PIN(IN, gpf0-0, UP, LV1);
> + PIN(IN, gpf0-1, UP, LV1);
> + PIN(IN, gpf0-2, DOWN, LV1);
> + PIN(IN, gpf0-3, UP, LV1);
> + PIN(IN, gpf0-4, DOWN, LV1);
> + PIN(IN, gpf0-5, NONE, LV1);
> + PIN(IN, gpf0-6, DOWN, LV1);
> + PIN(IN, gpf0-7, UP, LV1);
> + };
> +};
> +
> +&pinctrl_nfc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_nfc>;
> +
> + initial_nfc: initial-state {
> + PIN(IN, gpj0-2, DOWN, LV1);
> + };
> +};
> +
> +&pinctrl_peric {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_peric>;
> +
> + initial_peric: initial-state {
> + PIN(IN, gpv7-0, DOWN, LV1);
> + PIN(IN, gpv7-1, DOWN, LV1);
> + PIN(IN, gpv7-2, NONE, LV1);
> + PIN(IN, gpv7-3, DOWN, LV1);
> + PIN(IN, gpv7-4, DOWN, LV1);
> + PIN(IN, gpv7-5, DOWN, LV1);
> +
> + PIN(IN, gpb0-4, DOWN, LV1);
> +
> + PIN(IN, gpc0-2, DOWN, LV1);
> + PIN(IN, gpc0-5, DOWN, LV1);
> + PIN(IN, gpc0-7, DOWN, LV1);
> +
> + PIN(IN, gpc1-1, DOWN, LV1);
> +
> + PIN(IN, gpc3-4, NONE, LV1);
> + PIN(IN, gpc3-5, NONE, LV1);
> + PIN(IN, gpc3-6, NONE, LV1);
> + PIN(IN, gpc3-7, NONE, LV1);
> +
> + PIN(OUT, gpg0-0, NONE, LV1);
> + PIN(FUNC1, gpg0-1, DOWN, LV1);
> +
> + PIN(IN, gpd2-5, DOWN, LV1);
> +
> + PIN(IN, gpd4-0, NONE, LV1);
> + PIN(IN, gpd4-1, DOWN, LV1);
> + PIN(IN, gpd4-2, DOWN, LV1);
> + PIN(IN, gpd4-3, DOWN, LV1);
> + PIN(IN, gpd4-4, DOWN, LV1);
> +
> + PIN(IN, gpd6-3, DOWN, LV1);
> +
> + PIN(IN, gpd8-1, UP, LV1);
> +
> + PIN(IN, gpg1-0, DOWN, LV1);
> + PIN(IN, gpg1-1, DOWN, LV1);
> + PIN(IN, gpg1-2, DOWN, LV1);
> + PIN(IN, gpg1-3, DOWN, LV1);
> + PIN(IN, gpg1-4, DOWN, LV1);
> +
> + PIN(IN, gpg2-0, DOWN, LV1);
> + PIN(IN, gpg2-1, DOWN, LV1);
> +
> + PIN(IN, gpg3-0, DOWN, LV1);
> + PIN(IN, gpg3-1, DOWN, LV1);
> + PIN(IN, gpg3-5, DOWN, LV1);
> + PIN(IN, gpg3-7, DOWN, LV1);
> + };
> +};
> +
> +&pinctrl_touch {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_touch>;
> +
> + initial_touch: initial-state {
> + PIN(IN, gpj1-2, DOWN, LV1);
> + };
> +};
> +
> +&pwm {
> + pinctrl-0 = <&pwm0_out>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&mic {
> + status = "okay";
> +
> + i80-if-timings {
> + };
> +};
> +
> +&serial_1 {
> + status = "okay";
> +};
> +
> +&serial_3 {
> + assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
> + assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
> + status = "okay";
> +};
> +
> +&spi_1 {
> + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +
> + wm5110: wm5110-codec at 0 {
> + compatible = "wlf,wm5110";
> + reg = <0x0>;
> + spi-max-frequency = <20000000>;
> + interrupt-parent = <&gpa0>;
> + interrupts = <4 IRQ_TYPE_NONE>;
> + clocks = <&pmu_system_controller 0>,
> + <&s2mps13_osc S2MPS11_CLK_BT>;
> + clock-names = "mclk1", "mclk2";
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + wlf,micd-detect-debounce = <300>;
> + wlf,micd-bias-start-time = <0x1>;
> + wlf,micd-rate = <0x7>;
> + wlf,micd-dbtime = <0x1>;
> + wlf,micd-force-micbias;
> + wlf,micd-configs = <0x0 1 0>;
> + wlf,hpdet-channel = <1>;
> + wlf,gpsw = <0x1>;
> + wlf,inmode = <2 0 2 0>;
> +
> + wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
> + wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
> +
> + /* core supplies */
> + AVDD-supply = <&ldo18_reg>;
> + DBVDD1-supply = <&ldo18_reg>;
> + CPVDD-supply = <&ldo18_reg>;
> + DBVDD2-supply = <&ldo18_reg>;
> + DBVDD3-supply = <&ldo18_reg>;
> +
> + controller-data {
> + samsung,spi-feedback-delay = <0>;
> + };
> + };
> +};
> +
> +&timer {
> + clock-frequency = <24000000>;
> +};
> +
> +&tmu_atlas0 {
> + vtmu-supply = <&ldo3_reg>;
> + status = "okay";
> +};
> +
> +&tmu_apollo {
> + vtmu-supply = <&ldo3_reg>;
> + status = "okay";
> +};
> +
> +&tmu_g3d {
> + vtmu-supply = <&ldo3_reg>;
> + status = "okay";
> +};
> +
> +&usbdrd30 {
> + vdd33-supply = <&ldo10_reg>;
> + vdd10-supply = <&ldo6_reg>;
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_0 {
> + dr_mode = "otg";
> +};
> +
> +&usbdrd30_phy {
> + vbus-supply = <&safeout1_reg>;
> + status = "okay";
> +};
> +
> +&xxti {
> + clock-frequency = <24000000>;
> +};
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 5/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board
2016-11-03 6:39 ` Chanwoo Choi
@ 2016-11-03 12:26 ` Andi Shyti
-1 siblings, 0 replies; 43+ messages in thread
From: Andi Shyti @ 2016-11-03 12:26 UTC (permalink / raw)
To: Chanwoo Choi
Cc: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, chanwoo
Hi Chanwoo,
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Andi
On Thu, Nov 03, 2016 at 03:39:09PM +0900, Chanwoo Choi wrote:
> This patch adds the Device Tree source for Exynos5433-based Samsung TM2E
> board. TM2E board is the most similar with TM2 board. The exynos5433-tm2e.dts
> include the difference between TM2 and TM2E.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> Acked-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> .../bindings/arm/samsung/samsung-boards.txt | 1 +
> arch/arm64/boot/dts/exynos/Makefile | 1 +
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 41 ++++++++++++++++++++++
> 3 files changed, 43 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> index 339af8b9cdc5..c64c7b515777 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> @@ -16,6 +16,7 @@ Required root node properties:
> - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
> - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
> - "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
> + - "samsung,tm2e" - for Exynos5433-based Samsung TM2E board.
> - "samsung,sd5v1" - for Exynos5440-based Samsung board.
> - "samsung,ssdk5440" - for Exynos5440-based Samsung board.
>
> diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
> index 947c750acba1..7ddea53769a7 100644
> --- a/arch/arm64/boot/dts/exynos/Makefile
> +++ b/arch/arm64/boot/dts/exynos/Makefile
> @@ -1,5 +1,6 @@
> dtb-$(CONFIG_ARCH_EXYNOS) += \
> exynos5433-tm2.dtb \
> + exynos5433-tm2e.dtb \
> exynos7-espresso.dtb
>
> always := $(dtb-y)
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> new file mode 100644
> index 000000000000..1db4e7f363a9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> @@ -0,0 +1,41 @@
> +/*
> + * SAMSUNG Exynos5433 TM2E board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "exynos5433-tm2.dts"
> +
> +/ {
> + model = "Samsung TM2E board";
> + compatible = "samsung,tm2e", "samsung,exynos5433";
> +};
> +
> +&ldo23_reg {
> + regulator-name = "CAM_SEN_CORE_1.025V_AP";
> + regulator-max-microvolt = <1050000>;
> +};
> +
> +&ldo25_reg {
> + regulator-name = "UNUSED_LDO25";
> + regulator-always-off;
> +};
> +
> +&ldo31_reg {
> + regulator-name = "TSP_VDD_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +};
> +
> +&ldo38_reg {
> + regulator-name = "VCC_3.3V_MOTOR_AP";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +};
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 5/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board
@ 2016-11-03 12:26 ` Andi Shyti
0 siblings, 0 replies; 43+ messages in thread
From: Andi Shyti @ 2016-11-03 12:26 UTC (permalink / raw)
To: linux-arm-kernel
Hi Chanwoo,
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Andi
On Thu, Nov 03, 2016 at 03:39:09PM +0900, Chanwoo Choi wrote:
> This patch adds the Device Tree source for Exynos5433-based Samsung TM2E
> board. TM2E board is the most similar with TM2 board. The exynos5433-tm2e.dts
> include the difference between TM2 and TM2E.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> Acked-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> .../bindings/arm/samsung/samsung-boards.txt | 1 +
> arch/arm64/boot/dts/exynos/Makefile | 1 +
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 41 ++++++++++++++++++++++
> 3 files changed, 43 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> index 339af8b9cdc5..c64c7b515777 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> @@ -16,6 +16,7 @@ Required root node properties:
> - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
> - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
> - "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
> + - "samsung,tm2e" - for Exynos5433-based Samsung TM2E board.
> - "samsung,sd5v1" - for Exynos5440-based Samsung board.
> - "samsung,ssdk5440" - for Exynos5440-based Samsung board.
>
> diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
> index 947c750acba1..7ddea53769a7 100644
> --- a/arch/arm64/boot/dts/exynos/Makefile
> +++ b/arch/arm64/boot/dts/exynos/Makefile
> @@ -1,5 +1,6 @@
> dtb-$(CONFIG_ARCH_EXYNOS) += \
> exynos5433-tm2.dtb \
> + exynos5433-tm2e.dtb \
> exynos7-espresso.dtb
>
> always := $(dtb-y)
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> new file mode 100644
> index 000000000000..1db4e7f363a9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> @@ -0,0 +1,41 @@
> +/*
> + * SAMSUNG Exynos5433 TM2E board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "exynos5433-tm2.dts"
> +
> +/ {
> + model = "Samsung TM2E board";
> + compatible = "samsung,tm2e", "samsung,exynos5433";
> +};
> +
> +&ldo23_reg {
> + regulator-name = "CAM_SEN_CORE_1.025V_AP";
> + regulator-max-microvolt = <1050000>;
> +};
> +
> +&ldo25_reg {
> + regulator-name = "UNUSED_LDO25";
> + regulator-always-off;
> +};
> +
> +&ldo31_reg {
> + regulator-name = "TSP_VDD_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +};
> +
> +&ldo38_reg {
> + regulator-name = "VCC_3.3V_MOTOR_AP";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +};
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 1/5] pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank
2016-11-03 6:39 ` Chanwoo Choi
(?)
@ 2016-11-03 19:12 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 19:12 UTC (permalink / raw)
To: Chanwoo Choi
Cc: krzk-DgEjT+Ai2ygdnm+yROfE0A, kgene-DgEjT+Ai2ygdnm+yROfE0A,
javier-JPH+aEBZ4P+UEJcrhfAQsw, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
jh80.chung-Sze3O3UU22JBDgjK7y7TUQ,
sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ,
jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ,
inki.dae-Sze3O3UU22JBDgjK7y7TUQ,
jonghwa3.lee-Sze3O3UU22JBDgjK7y7TUQ,
beomho.seo-Sze3O3UU22JBDgjK7y7TUQ,
jaewon02.kim-Sze3O3UU22JBDgjK7y7TUQ,
human.hwang-Sze3O3UU22JBDgjK7y7TUQ,
ideal.song-Sze3O3UU22JBDgjK7y7TUQ,
ingi2.kim-Sze3O3UU22JBDgjK7y7TUQ,
m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ,
a.hajda-Sze3O3UU22JBDgjK7y7TUQ,
s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ,
andi.shyti-Sze3O3UU22JBDgjK7y7TUQ,
chanwoo-DgEjT+Ai2ygdnm+yROfE0A, Tomasz Figa, Linus Walleij,
linux-gpio-u79uwXL29TY76Z2rM5mHXA
On Thu, Nov 03, 2016 at 03:39:05PM +0900, Chanwoo Choi wrote:
> This patch supports the multiple IORESOURCE_MEM resources for one pin-bank.
> In the pre-existing Exynos series, the registers of the gpio bank are included
> in the one memory map. But, some gpio bank need to support the one more memory
> map (IORESOURCE_MEM) because the registers of gpio bank are separated into
> the different memory map.
>
> For example,
> The both ALIVE and IMEM domain have the different memory base address.
> The GFP[1-5] of exynos5433 are composed as following:
> - ALIVE domain : WEINT_* registers
> - IMEM domain : CON/DAT/PUD/DRV/CONPDN/PUDPDN register
>
> Cc: Tomasz Figa <tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Sylwester Nawrocki <s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Cc: Kukjin Kim <kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
> Cc: linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Suggested-by: Tomasz Figa <tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> ---
> .../bindings/pinctrl/samsung-pinctrl.txt | 19 ++++++++++
> drivers/pinctrl/samsung/pinctrl-exynos.c | 39 +++++++++------------
> drivers/pinctrl/samsung/pinctrl-exynos.h | 11 ++++++
> drivers/pinctrl/samsung/pinctrl-samsung.c | 40 ++++++++++++++--------
> drivers/pinctrl/samsung/pinctrl-samsung.h | 10 ++++--
> 5 files changed, 80 insertions(+), 39 deletions(-)
>
Hi,
Reviewed-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 1/5] pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank
@ 2016-11-03 19:12 ` Krzysztof Kozlowski
0 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 19:12 UTC (permalink / raw)
To: Chanwoo Choi
Cc: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, andi.shyti,
chanwoo, Tomasz Figa, Linus Walleij, linux-gpio
On Thu, Nov 03, 2016 at 03:39:05PM +0900, Chanwoo Choi wrote:
> This patch supports the multiple IORESOURCE_MEM resources for one pin-bank.
> In the pre-existing Exynos series, the registers of the gpio bank are included
> in the one memory map. But, some gpio bank need to support the one more memory
> map (IORESOURCE_MEM) because the registers of gpio bank are separated into
> the different memory map.
>
> For example,
> The both ALIVE and IMEM domain have the different memory base address.
> The GFP[1-5] of exynos5433 are composed as following:
> - ALIVE domain : WEINT_* registers
> - IMEM domain : CON/DAT/PUD/DRV/CONPDN/PUDPDN register
>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-gpio@vger.kernel.org
> Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
> .../bindings/pinctrl/samsung-pinctrl.txt | 19 ++++++++++
> drivers/pinctrl/samsung/pinctrl-exynos.c | 39 +++++++++------------
> drivers/pinctrl/samsung/pinctrl-exynos.h | 11 ++++++
> drivers/pinctrl/samsung/pinctrl-samsung.c | 40 ++++++++++++++--------
> drivers/pinctrl/samsung/pinctrl-samsung.h | 10 ++++--
> 5 files changed, 80 insertions(+), 39 deletions(-)
>
Hi,
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 1/5] pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank
@ 2016-11-03 19:12 ` Krzysztof Kozlowski
0 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 19:12 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 03, 2016 at 03:39:05PM +0900, Chanwoo Choi wrote:
> This patch supports the multiple IORESOURCE_MEM resources for one pin-bank.
> In the pre-existing Exynos series, the registers of the gpio bank are included
> in the one memory map. But, some gpio bank need to support the one more memory
> map (IORESOURCE_MEM) because the registers of gpio bank are separated into
> the different memory map.
>
> For example,
> The both ALIVE and IMEM domain have the different memory base address.
> The GFP[1-5] of exynos5433 are composed as following:
> - ALIVE domain : WEINT_* registers
> - IMEM domain : CON/DAT/PUD/DRV/CONPDN/PUDPDN register
>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-gpio at vger.kernel.org
> Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
> .../bindings/pinctrl/samsung-pinctrl.txt | 19 ++++++++++
> drivers/pinctrl/samsung/pinctrl-exynos.c | 39 +++++++++------------
> drivers/pinctrl/samsung/pinctrl-exynos.h | 11 ++++++
> drivers/pinctrl/samsung/pinctrl-samsung.c | 40 ++++++++++++++--------
> drivers/pinctrl/samsung/pinctrl-samsung.h | 10 ++++--
> 5 files changed, 80 insertions(+), 39 deletions(-)
>
Hi,
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 2/5] pinctrl: samsung: Add GPF support for Exynos5433
2016-11-03 6:39 ` Chanwoo Choi
@ 2016-11-03 19:20 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 19:20 UTC (permalink / raw)
To: Chanwoo Choi
Cc: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, andi.shyti,
chanwoo, Tomasz Figa, Linus Walleij, linux-gpio
On Thu, Nov 03, 2016 at 03:39:06PM +0900, Chanwoo Choi wrote:
> This patch add the support of GPF[1-5] pin of Exynos5433 SoC. The GPFx need
> to support the multiple memory map because the registers of GPFx are located
> in the different domain.
>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-gpio@vger.kernel.org
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
> drivers/pinctrl/samsung/pinctrl-exynos.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
I think that, instead of in previous patch, the
"samsung,exynos5433-pinctrl" compatible should be documented here along
with information that it requires two addresses for mappings.
Best regards,
Krzysztof
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
> index d657b52dfdb5..12f7d1eb65bc 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
> @@ -1339,6 +1339,11 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
> EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
> EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
> EXYNOS_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
> + EXYNOS_PIN_BANK_EINTW_EXT(8, 0x020, "gpf1", 0x1004, 1),
> + EXYNOS_PIN_BANK_EINTW_EXT(4, 0x040, "gpf2", 0x1008, 1),
> + EXYNOS_PIN_BANK_EINTW_EXT(4, 0x060, "gpf3", 0x100c, 1),
> + EXYNOS_PIN_BANK_EINTW_EXT(8, 0x080, "gpf4", 0x1010, 1),
> + EXYNOS_PIN_BANK_EINTW_EXT(8, 0x0a0, "gpf5", 0x1014, 1),
> };
>
> /* pin banks of exynos5433 pin-controller - AUD */
> @@ -1420,6 +1425,7 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
> .eint_wkup_init = exynos_eint_wkup_init,
> .suspend = exynos_pinctrl_suspend,
> .resume = exynos_pinctrl_resume,
> + .nr_ext_resources = 1,
> }, {
> /* pin-controller instance 1 data */
> .pin_banks = exynos5433_pin_banks1,
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 2/5] pinctrl: samsung: Add GPF support for Exynos5433
@ 2016-11-03 19:20 ` Krzysztof Kozlowski
0 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 19:20 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 03, 2016 at 03:39:06PM +0900, Chanwoo Choi wrote:
> This patch add the support of GPF[1-5] pin of Exynos5433 SoC. The GPFx need
> to support the multiple memory map because the registers of GPFx are located
> in the different domain.
>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-gpio at vger.kernel.org
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
> drivers/pinctrl/samsung/pinctrl-exynos.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
I think that, instead of in previous patch, the
"samsung,exynos5433-pinctrl" compatible should be documented here along
with information that it requires two addresses for mappings.
Best regards,
Krzysztof
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
> index d657b52dfdb5..12f7d1eb65bc 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
> @@ -1339,6 +1339,11 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
> EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
> EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
> EXYNOS_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
> + EXYNOS_PIN_BANK_EINTW_EXT(8, 0x020, "gpf1", 0x1004, 1),
> + EXYNOS_PIN_BANK_EINTW_EXT(4, 0x040, "gpf2", 0x1008, 1),
> + EXYNOS_PIN_BANK_EINTW_EXT(4, 0x060, "gpf3", 0x100c, 1),
> + EXYNOS_PIN_BANK_EINTW_EXT(8, 0x080, "gpf4", 0x1010, 1),
> + EXYNOS_PIN_BANK_EINTW_EXT(8, 0x0a0, "gpf5", 0x1014, 1),
> };
>
> /* pin banks of exynos5433 pin-controller - AUD */
> @@ -1420,6 +1425,7 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
> .eint_wkup_init = exynos_eint_wkup_init,
> .suspend = exynos_pinctrl_suspend,
> .resume = exynos_pinctrl_resume,
> + .nr_ext_resources = 1,
> }, {
> /* pin-controller instance 1 data */
> .pin_banks = exynos5433_pin_banks1,
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 3/5] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC
2016-11-03 6:39 ` Chanwoo Choi
@ 2016-11-03 19:47 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 19:47 UTC (permalink / raw)
To: Chanwoo Choi
Cc: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, andi.shyti,
chanwoo
On Thu, Nov 03, 2016 at 03:39:07PM +0900, Chanwoo Choi wrote:
> This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on
> Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports
> PSCI (Power State Coordination Interface) v0.1.
>
> This patch includes following Device Tree node to support Exynos5433 SoC:
> 1. Octa cores for big.LITTLE architecture
> - Cortex-A53 LITTLE Quad-core
> - Cortex-A57 big Quad-core
> - Support PSCI v0.1
>
Patch looks good to me. The GIC interrupt flags will have to be fixed
someday (e.f. https://patchwork.kernel.org/patch/9336553/) but this may
wait... It is violating the GIC since ancient times so I guess we can
violate it some more till someone will be annoyed enough to fix it. :)
BR,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 3/5] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC
@ 2016-11-03 19:47 ` Krzysztof Kozlowski
0 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 19:47 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 03, 2016 at 03:39:07PM +0900, Chanwoo Choi wrote:
> This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on
> Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports
> PSCI (Power State Coordination Interface) v0.1.
>
> This patch includes following Device Tree node to support Exynos5433 SoC:
> 1. Octa cores for big.LITTLE architecture
> - Cortex-A53 LITTLE Quad-core
> - Cortex-A57 big Quad-core
> - Support PSCI v0.1
>
Patch looks good to me. The GIC interrupt flags will have to be fixed
someday (e.f. https://patchwork.kernel.org/patch/9336553/) but this may
wait... It is violating the GIC since ancient times so I guess we can
violate it some more till someone will be annoyed enough to fix it. :)
BR,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 3/5] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC
2016-11-03 19:47 ` Krzysztof Kozlowski
(?)
@ 2016-11-03 20:10 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 20:10 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Chanwoo Choi, kgene, javier, robh+dt, mark.rutland,
catalin.marinas, will.deacon, devicetree, linux-arm-kernel,
linux-samsung-soc, linux-kernel, jh80.chung, sw0312.kim,
jy0922.shim, inki.dae, jonghwa3.lee, beomho.seo, jaewon02.kim,
human.hwang, ideal.song, ingi2.kim, m.szyprowski, a.hajda,
s.nawrocki, andi.shyti, chanwoo
On Thu, Nov 03, 2016 at 09:47:16PM +0200, Krzysztof Kozlowski wrote:
> On Thu, Nov 03, 2016 at 03:39:07PM +0900, Chanwoo Choi wrote:
> > This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on
> > Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports
> > PSCI (Power State Coordination Interface) v0.1.
> >
> > This patch includes following Device Tree node to support Exynos5433 SoC:
> > 1. Octa cores for big.LITTLE architecture
> > - Cortex-A53 LITTLE Quad-core
> > - Cortex-A57 big Quad-core
> > - Support PSCI v0.1
> >
>
> Patch looks good to me. The GIC interrupt flags will have to be fixed
> someday (e.f. https://patchwork.kernel.org/patch/9336553/) but this may
> wait... It is violating the GIC since ancient times so I guess we can
> violate it some more till someone will be annoyed enough to fix it. :)
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 3/5] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC
@ 2016-11-03 20:10 ` Krzysztof Kozlowski
0 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 20:10 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Chanwoo Choi, kgene-DgEjT+Ai2ygdnm+yROfE0A,
javier-JPH+aEBZ4P+UEJcrhfAQsw, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
jh80.chung-Sze3O3UU22JBDgjK7y7TUQ,
sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ,
jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ,
inki.dae-Sze3O3UU22JBDgjK7y7TUQ,
jonghwa3.lee-Sze3O3UU22JBDgjK7y7TUQ,
beomho.seo-Sze3O3UU22JBDgjK7y7TUQ,
jaewon02.kim-Sze3O3UU22JBDgjK7y7TUQ,
human.hwang-Sze3O3UU22JBDgjK7y7TUQ,
ideal.song-Sze3O3UU22JBDgjK7y7TUQ,
ingi2.kim-Sze3O3UU22JBDgjK7y7TUQ,
m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ,
a.hajda-Sze3O3UU22JBDgjK7y7TUQ,
s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ,
andi.shyti-Sze3O3UU22JBDgjK7y7TUQ,
chanwoo-DgEjT+Ai2ygdnm+yROfE0A
On Thu, Nov 03, 2016 at 09:47:16PM +0200, Krzysztof Kozlowski wrote:
> On Thu, Nov 03, 2016 at 03:39:07PM +0900, Chanwoo Choi wrote:
> > This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on
> > Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports
> > PSCI (Power State Coordination Interface) v0.1.
> >
> > This patch includes following Device Tree node to support Exynos5433 SoC:
> > 1. Octa cores for big.LITTLE architecture
> > - Cortex-A53 LITTLE Quad-core
> > - Cortex-A57 big Quad-core
> > - Support PSCI v0.1
> >
>
> Patch looks good to me. The GIC interrupt flags will have to be fixed
> someday (e.f. https://patchwork.kernel.org/patch/9336553/) but this may
> wait... It is violating the GIC since ancient times so I guess we can
> violate it some more till someone will be annoyed enough to fix it. :)
Thanks, applied.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 3/5] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC
@ 2016-11-03 20:10 ` Krzysztof Kozlowski
0 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 20:10 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 03, 2016 at 09:47:16PM +0200, Krzysztof Kozlowski wrote:
> On Thu, Nov 03, 2016 at 03:39:07PM +0900, Chanwoo Choi wrote:
> > This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on
> > Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports
> > PSCI (Power State Coordination Interface) v0.1.
> >
> > This patch includes following Device Tree node to support Exynos5433 SoC:
> > 1. Octa cores for big.LITTLE architecture
> > - Cortex-A53 LITTLE Quad-core
> > - Cortex-A57 big Quad-core
> > - Support PSCI v0.1
> >
>
> Patch looks good to me. The GIC interrupt flags will have to be fixed
> someday (e.f. https://patchwork.kernel.org/patch/9336553/) but this may
> wait... It is violating the GIC since ancient times so I guess we can
> violate it some more till someone will be annoyed enough to fix it. :)
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 4/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
2016-11-03 6:39 ` Chanwoo Choi
@ 2016-11-03 20:10 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 20:10 UTC (permalink / raw)
To: Chanwoo Choi
Cc: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, andi.shyti,
chanwoo
On Thu, Nov 03, 2016 at 03:39:08PM +0900, Chanwoo Choi wrote:
> This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board.
> This board fully support the all things for mobile target.
>
> This patch supports the following devices:
> 1. basic SoC
> - Initial booting for Samsung Exynos5433 SoC
> - DRAM LPDDR3 (3GB)
> - eMMC (32GB)
> - ARM architecture timer
>
> 2. power management devices
> - Sasmung S2MPS13 PMIC for the power supply
> - CPUFREQ for big.LITTLE cores
> - TMU for big.LITTLE cores and GPU
> - ADC with thermistor to measure the temperature of AP/Battery/Charger
> - Maxim MAX77843 Interface PMIC (MUIC/Haptic/Regulator)
>
> 3. sound devices
> - I2S for sound bus
> - LPASS for sound power control
> - Wolfson WM5110 for sound codec
> - Maxim MAX98504 for speaker amplifier
> - TM2 ASoC Machine device driver node
>
> 3. display devices
> - DECON, DSI and MIC for the panel output
>
> 4. usb devices
> - USB 3.0 DRD (Dual Role Device)
> - USB 3.0 Host controller
>
> 5. storage devices
> - MSHC (Mobile Storage Host Controller) for eMMC device
>
> 6. misc devices
> - gpio-keys (power, volume up/down, home key)
> - PWM (Pulse Width Modulation Timer)
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> .../bindings/arm/samsung/samsung-boards.txt | 1 +
> arch/arm64/boot/dts/exynos/Makefile | 4 +-
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 974 +++++++++++++++++++++
> 3 files changed, 978 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 4/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
@ 2016-11-03 20:10 ` Krzysztof Kozlowski
0 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 20:10 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 03, 2016 at 03:39:08PM +0900, Chanwoo Choi wrote:
> This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board.
> This board fully support the all things for mobile target.
>
> This patch supports the following devices:
> 1. basic SoC
> - Initial booting for Samsung Exynos5433 SoC
> - DRAM LPDDR3 (3GB)
> - eMMC (32GB)
> - ARM architecture timer
>
> 2. power management devices
> - Sasmung S2MPS13 PMIC for the power supply
> - CPUFREQ for big.LITTLE cores
> - TMU for big.LITTLE cores and GPU
> - ADC with thermistor to measure the temperature of AP/Battery/Charger
> - Maxim MAX77843 Interface PMIC (MUIC/Haptic/Regulator)
>
> 3. sound devices
> - I2S for sound bus
> - LPASS for sound power control
> - Wolfson WM5110 for sound codec
> - Maxim MAX98504 for speaker amplifier
> - TM2 ASoC Machine device driver node
>
> 3. display devices
> - DECON, DSI and MIC for the panel output
>
> 4. usb devices
> - USB 3.0 DRD (Dual Role Device)
> - USB 3.0 Host controller
>
> 5. storage devices
> - MSHC (Mobile Storage Host Controller) for eMMC device
>
> 6. misc devices
> - gpio-keys (power, volume up/down, home key)
> - PWM (Pulse Width Modulation Timer)
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> .../bindings/arm/samsung/samsung-boards.txt | 1 +
> arch/arm64/boot/dts/exynos/Makefile | 4 +-
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 974 +++++++++++++++++++++
> 3 files changed, 978 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 5/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board
2016-11-03 6:39 ` Chanwoo Choi
@ 2016-11-03 20:11 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 20:11 UTC (permalink / raw)
To: Chanwoo Choi
Cc: krzk, kgene, javier, robh+dt, mark.rutland, catalin.marinas,
will.deacon, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel, jh80.chung, sw0312.kim, jy0922.shim, inki.dae,
jonghwa3.lee, beomho.seo, jaewon02.kim, human.hwang, ideal.song,
ingi2.kim, m.szyprowski, a.hajda, s.nawrocki, andi.shyti,
chanwoo
On Thu, Nov 03, 2016 at 03:39:09PM +0900, Chanwoo Choi wrote:
> This patch adds the Device Tree source for Exynos5433-based Samsung TM2E
> board. TM2E board is the most similar with TM2 board. The exynos5433-tm2e.dts
> include the difference between TM2 and TM2E.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> Acked-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> .../bindings/arm/samsung/samsung-boards.txt | 1 +
> arch/arm64/boot/dts/exynos/Makefile | 1 +
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 41 ++++++++++++++++++++++
> 3 files changed, 43 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 5/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board
@ 2016-11-03 20:11 ` Krzysztof Kozlowski
0 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 20:11 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 03, 2016 at 03:39:09PM +0900, Chanwoo Choi wrote:
> This patch adds the Device Tree source for Exynos5433-based Samsung TM2E
> board. TM2E board is the most similar with TM2 board. The exynos5433-tm2e.dts
> include the difference between TM2 and TM2E.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> Acked-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> .../bindings/arm/samsung/samsung-boards.txt | 1 +
> arch/arm64/boot/dts/exynos/Makefile | 1 +
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 41 ++++++++++++++++++++++
> 3 files changed, 43 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 1/5] pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank
2016-11-03 6:39 ` Chanwoo Choi
(?)
@ 2016-11-08 9:34 ` Linus Walleij
-1 siblings, 0 replies; 43+ messages in thread
From: Linus Walleij @ 2016-11-08 9:34 UTC (permalink / raw)
To: Chanwoo Choi
Cc: Krzysztof Kozlowski, Kukjin Kim, Javier Martinez Canillas,
Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel,
Jaehoon Chung, sw0312.kim, Joonyoung Shim, Inki Dae, Jonghwa Lee,
beomho.seo, jaewon02.kim, human.hwang
On Thu, Nov 3, 2016 at 7:39 AM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> This patch supports the multiple IORESOURCE_MEM resources for one pin-bank.
> In the pre-existing Exynos series, the registers of the gpio bank are included
> in the one memory map. But, some gpio bank need to support the one more memory
> map (IORESOURCE_MEM) because the registers of gpio bank are separated into
> the different memory map.
>
> For example,
> The both ALIVE and IMEM domain have the different memory base address.
> The GFP[1-5] of exynos5433 are composed as following:
> - ALIVE domain : WEINT_* registers
> - IMEM domain : CON/DAT/PUD/DRV/CONPDN/PUDPDN register
>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-gpio@vger.kernel.org
> Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Patch applied with Krzysztof's review tag.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 1/5] pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank
@ 2016-11-08 9:34 ` Linus Walleij
0 siblings, 0 replies; 43+ messages in thread
From: Linus Walleij @ 2016-11-08 9:34 UTC (permalink / raw)
To: Chanwoo Choi
Cc: Krzysztof Kozlowski, Kukjin Kim, Javier Martinez Canillas,
Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel,
Jaehoon Chung, sw0312.kim, Joonyoung Shim, Inki Dae, Jonghwa Lee,
beomho.seo, jaewon02.kim, human.hwang, ideal.song, ingi2.kim,
Marek Szyprowski, Andrzej Hajda, Sylwester Nawrocki, andi.shyti,
chanwoo, Tomasz Figa, linux-gpio
On Thu, Nov 3, 2016 at 7:39 AM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> This patch supports the multiple IORESOURCE_MEM resources for one pin-bank.
> In the pre-existing Exynos series, the registers of the gpio bank are included
> in the one memory map. But, some gpio bank need to support the one more memory
> map (IORESOURCE_MEM) because the registers of gpio bank are separated into
> the different memory map.
>
> For example,
> The both ALIVE and IMEM domain have the different memory base address.
> The GFP[1-5] of exynos5433 are composed as following:
> - ALIVE domain : WEINT_* registers
> - IMEM domain : CON/DAT/PUD/DRV/CONPDN/PUDPDN register
>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-gpio@vger.kernel.org
> Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Patch applied with Krzysztof's review tag.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 1/5] pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank
@ 2016-11-08 9:34 ` Linus Walleij
0 siblings, 0 replies; 43+ messages in thread
From: Linus Walleij @ 2016-11-08 9:34 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 3, 2016 at 7:39 AM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> This patch supports the multiple IORESOURCE_MEM resources for one pin-bank.
> In the pre-existing Exynos series, the registers of the gpio bank are included
> in the one memory map. But, some gpio bank need to support the one more memory
> map (IORESOURCE_MEM) because the registers of gpio bank are separated into
> the different memory map.
>
> For example,
> The both ALIVE and IMEM domain have the different memory base address.
> The GFP[1-5] of exynos5433 are composed as following:
> - ALIVE domain : WEINT_* registers
> - IMEM domain : CON/DAT/PUD/DRV/CONPDN/PUDPDN register
>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-gpio at vger.kernel.org
> Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Patch applied with Krzysztof's review tag.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 2/5] pinctrl: samsung: Add GPF support for Exynos5433
2016-11-03 6:39 ` Chanwoo Choi
(?)
@ 2016-11-08 9:36 ` Linus Walleij
-1 siblings, 0 replies; 43+ messages in thread
From: Linus Walleij @ 2016-11-08 9:36 UTC (permalink / raw)
To: Chanwoo Choi
Cc: Krzysztof Kozlowski, Kukjin Kim, Javier Martinez Canillas,
Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel,
Jaehoon Chung, sw0312.kim, Joonyoung Shim, Inki Dae, Jonghwa Lee,
beomho.seo, jaewon02.kim, human.hwang
On Thu, Nov 3, 2016 at 7:39 AM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> This patch add the support of GPF[1-5] pin of Exynos5433 SoC. The GPFx need
> to support the multiple memory map because the registers of GPFx are located
> in the different domain.
>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-gpio@vger.kernel.org
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Patch applied.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 2/5] pinctrl: samsung: Add GPF support for Exynos5433
@ 2016-11-08 9:36 ` Linus Walleij
0 siblings, 0 replies; 43+ messages in thread
From: Linus Walleij @ 2016-11-08 9:36 UTC (permalink / raw)
To: Chanwoo Choi
Cc: Krzysztof Kozlowski, Kukjin Kim, Javier Martinez Canillas,
Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel,
Jaehoon Chung, sw0312.kim, Joonyoung Shim, Inki Dae, Jonghwa Lee,
beomho.seo, jaewon02.kim, human.hwang, ideal.song, ingi2.kim,
Marek Szyprowski, Andrzej Hajda, Sylwester Nawrocki, andi.shyti,
chanwoo, Tomasz Figa, linux-gpio
On Thu, Nov 3, 2016 at 7:39 AM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> This patch add the support of GPF[1-5] pin of Exynos5433 SoC. The GPFx need
> to support the multiple memory map because the registers of GPFx are located
> in the different domain.
>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-gpio@vger.kernel.org
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Patch applied.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 2/5] pinctrl: samsung: Add GPF support for Exynos5433
@ 2016-11-08 9:36 ` Linus Walleij
0 siblings, 0 replies; 43+ messages in thread
From: Linus Walleij @ 2016-11-08 9:36 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 3, 2016 at 7:39 AM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> This patch add the support of GPF[1-5] pin of Exynos5433 SoC. The GPFx need
> to support the multiple memory map because the registers of GPFx are located
> in the different domain.
>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-gpio at vger.kernel.org
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Patch applied.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 2/5] pinctrl: samsung: Add GPF support for Exynos5433
2016-11-03 19:20 ` Krzysztof Kozlowski
(?)
@ 2016-11-08 9:36 ` Linus Walleij
-1 siblings, 0 replies; 43+ messages in thread
From: Linus Walleij @ 2016-11-08 9:36 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Chanwoo Choi, Kukjin Kim, Javier Martinez Canillas, Rob Herring,
Mark Rutland, Catalin Marinas, Will Deacon,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
Jaehoon Chung, sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ, Joonyoung Shim,
Inki Dae, Jonghwa Lee, beomho.seo-Sze3O3UU22JBDgjK7y7TUQ,
jaewon02.kim-Sze3O3UU22JBDgjK7y7TUQ, human.hwang
On Thu, Nov 3, 2016 at 8:20 PM, Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> On Thu, Nov 03, 2016 at 03:39:06PM +0900, Chanwoo Choi wrote:
>> This patch add the support of GPF[1-5] pin of Exynos5433 SoC. The GPFx need
>> to support the multiple memory map because the registers of GPFx are located
>> in the different domain.
>>
>> Cc: Tomasz Figa <tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> Cc: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>> Cc: Sylwester Nawrocki <s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>> Cc: Kukjin Kim <kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>> Cc: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
>> Cc: linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> Signed-off-by: Joonyoung Shim <jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>> Signed-off-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>> ---
>> drivers/pinctrl/samsung/pinctrl-exynos.c | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>
> I think that, instead of in previous patch, the
> "samsung,exynos5433-pinctrl" compatible should be documented here along
> with information that it requires two addresses for mappings.
True but too small detail to respin the patches about,
and I'm not perfectionist, so patch applied anyways.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v3 2/5] pinctrl: samsung: Add GPF support for Exynos5433
@ 2016-11-08 9:36 ` Linus Walleij
0 siblings, 0 replies; 43+ messages in thread
From: Linus Walleij @ 2016-11-08 9:36 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Chanwoo Choi, Kukjin Kim, Javier Martinez Canillas, Rob Herring,
Mark Rutland, Catalin Marinas, Will Deacon, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel, Jaehoon Chung,
sw0312.kim, Joonyoung Shim, Inki Dae, Jonghwa Lee, beomho.seo,
jaewon02.kim, human.hwang, ideal.song, ingi2.kim,
Marek Szyprowski, Andrzej Hajda, Sylwester Nawrocki, andi.shyti,
chanwoo, Tomasz Figa, linux-gpio
On Thu, Nov 3, 2016 at 8:20 PM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> On Thu, Nov 03, 2016 at 03:39:06PM +0900, Chanwoo Choi wrote:
>> This patch add the support of GPF[1-5] pin of Exynos5433 SoC. The GPFx need
>> to support the multiple memory map because the registers of GPFx are located
>> in the different domain.
>>
>> Cc: Tomasz Figa <tomasz.figa@gmail.com>
>> Cc: Krzysztof Kozlowski <krzk@kernel.org>
>> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
>> Cc: Kukjin Kim <kgene@kernel.org>
>> Cc: Linus Walleij <linus.walleij@linaro.org>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: linux-gpio@vger.kernel.org
>> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> ---
>> drivers/pinctrl/samsung/pinctrl-exynos.c | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>
> I think that, instead of in previous patch, the
> "samsung,exynos5433-pinctrl" compatible should be documented here along
> with information that it requires two addresses for mappings.
True but too small detail to respin the patches about,
and I'm not perfectionist, so patch applied anyways.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v3 2/5] pinctrl: samsung: Add GPF support for Exynos5433
@ 2016-11-08 9:36 ` Linus Walleij
0 siblings, 0 replies; 43+ messages in thread
From: Linus Walleij @ 2016-11-08 9:36 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 3, 2016 at 8:20 PM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> On Thu, Nov 03, 2016 at 03:39:06PM +0900, Chanwoo Choi wrote:
>> This patch add the support of GPF[1-5] pin of Exynos5433 SoC. The GPFx need
>> to support the multiple memory map because the registers of GPFx are located
>> in the different domain.
>>
>> Cc: Tomasz Figa <tomasz.figa@gmail.com>
>> Cc: Krzysztof Kozlowski <krzk@kernel.org>
>> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
>> Cc: Kukjin Kim <kgene@kernel.org>
>> Cc: Linus Walleij <linus.walleij@linaro.org>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: linux-gpio at vger.kernel.org
>> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> ---
>> drivers/pinctrl/samsung/pinctrl-exynos.c | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>
> I think that, instead of in previous patch, the
> "samsung,exynos5433-pinctrl" compatible should be documented here along
> with information that it requires two addresses for mappings.
True but too small detail to respin the patches about,
and I'm not perfectionist, so patch applied anyways.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 43+ messages in thread
end of thread, other threads:[~2016-11-08 9:36 UTC | newest]
Thread overview: 43+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-11-03 6:39 [PATCH v3 0/5] arm64: dts: Add the dts file for Exynos5433 and TM/TM2E board Chanwoo Choi
2016-11-03 6:39 ` Chanwoo Choi
2016-11-03 6:39 ` [PATCH v3 1/5] pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank Chanwoo Choi
2016-11-03 6:39 ` Chanwoo Choi
[not found] ` <1478155149-28527-2-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-11-03 19:12 ` Krzysztof Kozlowski
2016-11-03 19:12 ` Krzysztof Kozlowski
2016-11-03 19:12 ` Krzysztof Kozlowski
2016-11-08 9:34 ` Linus Walleij
2016-11-08 9:34 ` Linus Walleij
2016-11-08 9:34 ` Linus Walleij
2016-11-03 6:39 ` [PATCH v3 2/5] pinctrl: samsung: Add GPF support for Exynos5433 Chanwoo Choi
2016-11-03 6:39 ` Chanwoo Choi
2016-11-03 6:39 ` Chanwoo Choi
2016-11-03 19:20 ` Krzysztof Kozlowski
2016-11-03 19:20 ` Krzysztof Kozlowski
2016-11-08 9:36 ` Linus Walleij
2016-11-08 9:36 ` Linus Walleij
2016-11-08 9:36 ` Linus Walleij
2016-11-08 9:36 ` Linus Walleij
2016-11-08 9:36 ` Linus Walleij
2016-11-08 9:36 ` Linus Walleij
2016-11-03 6:39 ` [PATCH v3 3/5] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC Chanwoo Choi
2016-11-03 6:39 ` Chanwoo Choi
2016-11-03 12:26 ` Andi Shyti
2016-11-03 12:26 ` Andi Shyti
2016-11-03 19:47 ` Krzysztof Kozlowski
2016-11-03 19:47 ` Krzysztof Kozlowski
2016-11-03 20:10 ` Krzysztof Kozlowski
2016-11-03 20:10 ` Krzysztof Kozlowski
2016-11-03 20:10 ` Krzysztof Kozlowski
2016-11-03 6:39 ` [PATCH v3 4/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board Chanwoo Choi
2016-11-03 6:39 ` Chanwoo Choi
2016-11-03 12:26 ` Andi Shyti
2016-11-03 12:26 ` Andi Shyti
2016-11-03 12:26 ` Andi Shyti
2016-11-03 20:10 ` Krzysztof Kozlowski
2016-11-03 20:10 ` Krzysztof Kozlowski
2016-11-03 6:39 ` [PATCH v3 5/5] arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board Chanwoo Choi
2016-11-03 6:39 ` Chanwoo Choi
2016-11-03 12:26 ` Andi Shyti
2016-11-03 12:26 ` Andi Shyti
2016-11-03 20:11 ` Krzysztof Kozlowski
2016-11-03 20:11 ` Krzysztof Kozlowski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.