* commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 2:47 ` Tobias Jakobi
0 siblings, 0 replies; 29+ messages in thread
From: Tobias Jakobi @ 2016-11-20 2:47 UTC (permalink / raw)
To: viro; +Cc: linux-samsung-soc, linux-arm-kernel, linux-kernel
Hello,
this is a resend of my initial mail, see below, to Al Viro (which sadly
was ignored).
It's rc5 now, and this issue still remains. Putting some more lists on
the Cc now.
Reverting the commit still works for me.
With best wishes,
Tobias
----------------
Hello Al,
compiled a kernel on armv7 with torvalds/master today and getting some
errors during the modpost phase.
> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
<snip>
It seems like the commit 'arm: move exports to definitions' introduces
this issue.
I quickly went over the commit and I noticed that while it removes the
EXPORT_SYMBOL()s for the bitops from armksyms.c, it doesn't move them
anywhere.
Maybe you can take a look at this?
With best wishes,
Tobias
^ permalink raw reply [flat|nested] 29+ messages in thread
* commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 2:47 ` Tobias Jakobi
0 siblings, 0 replies; 29+ messages in thread
From: Tobias Jakobi @ 2016-11-20 2:47 UTC (permalink / raw)
To: viro; +Cc: linux-samsung-soc, linux-arm-kernel, linux-kernel
Hello,
this is a resend of my initial mail, see below, to Al Viro (which sadly
was ignored).
It's rc5 now, and this issue still remains. Putting some more lists on
the Cc now.
Reverting the commit still works for me.
With best wishes,
Tobias
----------------
Hello Al,
compiled a kernel on armv7 with torvalds/master today and getting some
errors during the modpost phase.
> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
<snip>
It seems like the commit 'arm: move exports to definitions' introduces
this issue.
I quickly went over the commit and I noticed that while it removes the
EXPORT_SYMBOL()s for the bitops from armksyms.c, it doesn't move them
anywhere.
Maybe you can take a look at this?
With best wishes,
Tobias
^ permalink raw reply [flat|nested] 29+ messages in thread
* commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 2:47 ` Tobias Jakobi
0 siblings, 0 replies; 29+ messages in thread
From: Tobias Jakobi @ 2016-11-20 2:47 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
this is a resend of my initial mail, see below, to Al Viro (which sadly
was ignored).
It's rc5 now, and this issue still remains. Putting some more lists on
the Cc now.
Reverting the commit still works for me.
With best wishes,
Tobias
----------------
Hello Al,
compiled a kernel on armv7 with torvalds/master today and getting some
errors during the modpost phase.
> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
<snip>
It seems like the commit 'arm: move exports to definitions' introduces
this issue.
I quickly went over the commit and I noticed that while it removes the
EXPORT_SYMBOL()s for the bitops from armksyms.c, it doesn't move them
anywhere.
Maybe you can take a look at this?
With best wishes,
Tobias
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
2016-11-20 2:47 ` Tobias Jakobi
(?)
@ 2016-11-20 11:30 ` Russell King - ARM Linux
-1 siblings, 0 replies; 29+ messages in thread
From: Russell King - ARM Linux @ 2016-11-20 11:30 UTC (permalink / raw)
To: Tobias Jakobi; +Cc: viro, linux-samsung-soc, linux-kernel, linux-arm-kernel
None of the autobuilders are finding this problem, and they build a
wide range of configurations. Maybe it's something specific to how
you're building the kernel - can you give step by step instructions
how to reproduce this please?
On Sun, Nov 20, 2016 at 03:47:34AM +0100, Tobias Jakobi wrote:
> Hello,
>
> this is a resend of my initial mail, see below, to Al Viro (which sadly
> was ignored).
>
> It's rc5 now, and this issue still remains. Putting some more lists on
> the Cc now.
>
> Reverting the commit still works for me.
>
>
> With best wishes,
> Tobias
>
> ----------------
>
>
> Hello Al,
>
> compiled a kernel on armv7 with torvalds/master today and getting some
> errors during the modpost phase.
>
> > ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
> <snip>
>
> It seems like the commit 'arm: move exports to definitions' introduces
> this issue.
>
> I quickly went over the commit and I noticed that while it removes the
> EXPORT_SYMBOL()s for the bitops from armksyms.c, it doesn't move them
> anywhere.
>
> Maybe you can take a look at this?
>
> With best wishes,
> Tobias
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 11:30 ` Russell King - ARM Linux
0 siblings, 0 replies; 29+ messages in thread
From: Russell King - ARM Linux @ 2016-11-20 11:30 UTC (permalink / raw)
To: Tobias Jakobi; +Cc: viro, linux-samsung-soc, linux-kernel, linux-arm-kernel
None of the autobuilders are finding this problem, and they build a
wide range of configurations. Maybe it's something specific to how
you're building the kernel - can you give step by step instructions
how to reproduce this please?
On Sun, Nov 20, 2016 at 03:47:34AM +0100, Tobias Jakobi wrote:
> Hello,
>
> this is a resend of my initial mail, see below, to Al Viro (which sadly
> was ignored).
>
> It's rc5 now, and this issue still remains. Putting some more lists on
> the Cc now.
>
> Reverting the commit still works for me.
>
>
> With best wishes,
> Tobias
>
> ----------------
>
>
> Hello Al,
>
> compiled a kernel on armv7 with torvalds/master today and getting some
> errors during the modpost phase.
>
> > ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
> <snip>
>
> It seems like the commit 'arm: move exports to definitions' introduces
> this issue.
>
> I quickly went over the commit and I noticed that while it removes the
> EXPORT_SYMBOL()s for the bitops from armksyms.c, it doesn't move them
> anywhere.
>
> Maybe you can take a look at this?
>
> With best wishes,
> Tobias
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 29+ messages in thread
* commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 11:30 ` Russell King - ARM Linux
0 siblings, 0 replies; 29+ messages in thread
From: Russell King - ARM Linux @ 2016-11-20 11:30 UTC (permalink / raw)
To: linux-arm-kernel
None of the autobuilders are finding this problem, and they build a
wide range of configurations. Maybe it's something specific to how
you're building the kernel - can you give step by step instructions
how to reproduce this please?
On Sun, Nov 20, 2016 at 03:47:34AM +0100, Tobias Jakobi wrote:
> Hello,
>
> this is a resend of my initial mail, see below, to Al Viro (which sadly
> was ignored).
>
> It's rc5 now, and this issue still remains. Putting some more lists on
> the Cc now.
>
> Reverting the commit still works for me.
>
>
> With best wishes,
> Tobias
>
> ----------------
>
>
> Hello Al,
>
> compiled a kernel on armv7 with torvalds/master today and getting some
> errors during the modpost phase.
>
> > ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
> <snip>
>
> It seems like the commit 'arm: move exports to definitions' introduces
> this issue.
>
> I quickly went over the commit and I noticed that while it removes the
> EXPORT_SYMBOL()s for the bitops from armksyms.c, it doesn't move them
> anywhere.
>
> Maybe you can take a look at this?
>
> With best wishes,
> Tobias
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
2016-11-20 11:30 ` Russell King - ARM Linux
(?)
@ 2016-11-20 11:43 ` Tobias Jakobi
-1 siblings, 0 replies; 29+ messages in thread
From: Tobias Jakobi @ 2016-11-20 11:43 UTC (permalink / raw)
To: Russell King - ARM Linux, Tobias Jakobi
Cc: viro, linux-samsung-soc, linux-kernel, linux-arm-kernel
Hello Russell,
Russell King - ARM Linux wrote:
> None of the autobuilders are finding this problem, and they build a
> wide range of configurations. Maybe it's something specific to how
> you're building the kernel - can you give step by step instructions
> how to reproduce this please?
Just using plain make here, no cross-compiler or anything involved. gcc
is version 4.9.4.
Build platform is a Exynos4412 based ODROID-X2.
The complete log from the 'build modules' step:
> Building modules, stage 2.
> Kernel: arch/arm/boot/Image is ready
> MODPOST 52 modules
> XZKERN arch/arm/boot/compressed/piggy_data
> SHIPPED arch/arm/boot/compressed/lib1funcs.S
> SHIPPED arch/arm/boot/compressed/ashldi3.S
> SHIPPED arch/arm/boot/compressed/bswapsdi2.S
> AS arch/arm/boot/compressed/lib1funcs.o
> AS arch/arm/boot/compressed/ashldi3.o
> AS arch/arm/boot/compressed/bswapsdi2.o
> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/core/seq/snd-seq.ko] undefined!
> ERROR: "_set_bit" [net/bridge/bridge.ko] undefined!
> ERROR: "_clear_bit" [net/bridge/bridge.ko] undefined!
> ERROR: "_test_and_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> ERROR: "_set_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> ERROR: "_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> ERROR: "_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> ERROR: "_test_and_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> ERROR: "_clear_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> ERROR: "_test_and_clear_bit" [fs/fuse/fuse.ko] undefined!
> ERROR: "_set_bit" [fs/fuse/fuse.ko] undefined!
> ERROR: "_test_and_set_bit" [fs/fuse/fuse.ko] undefined!
> ERROR: "_clear_bit" [fs/fuse/fuse.ko] undefined!
> ERROR: "_test_and_clear_bit" [fs/cifs/cifs.ko] undefined!
> ERROR: "_set_bit" [fs/cifs/cifs.ko] undefined!
> ERROR: "_test_and_set_bit" [fs/cifs/cifs.ko] undefined!
> ERROR: "_clear_bit" [fs/cifs/cifs.ko] undefined!
> ERROR: "_test_and_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> ERROR: "_set_bit" [fs/btrfs/btrfs.ko] undefined!
> ERROR: "_test_and_set_bit" [fs/btrfs/btrfs.ko] undefined!
> ERROR: "_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> ERROR: "_test_and_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> ERROR: "_set_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> ERROR: "_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> ERROR: "_set_bit" [drivers/usb/gadget/libcomposite.ko] undefined!
> ERROR: "_set_bit" [drivers/usb/gadget/function/usb_f_rndis.ko] undefined!
> ERROR: "_test_and_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> ERROR: "_test_and_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> ERROR: "_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> ERROR: "_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> ERROR: "_test_and_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> ERROR: "_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> ERROR: "_test_and_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> ERROR: "_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> ERROR: "_clear_bit" [drivers/md/dm-crypt.ko] undefined!
> ERROR: "_set_bit" [drivers/md/dm-crypt.ko] undefined!
> ERROR: "_set_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> ERROR: "_clear_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> ERROR: "_test_and_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> ERROR: "_test_and_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> ERROR: "_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> ERROR: "_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> ERROR: "_set_bit" [drivers/bluetooth/btintel.ko] undefined!
> ERROR: "_set_bit" [drivers/bluetooth/btbcm.ko] undefined!
> scripts/Makefile.modpost:91: recipe for target '__modpost' failed
> make[1]: *** [__modpost] Error 1
> Makefile:1191: recipe for target 'modules' failed
> make: *** [modules] Error 2
This is the config I'm using for the build:
https://github.com/tobiasjakobi/odroid-environment/blob/master/sourcecode/system/vanilla-4.9-debug.conf
Let me know which additional information you need.
With best wishes,
Tobias
> On Sun, Nov 20, 2016 at 03:47:34AM +0100, Tobias Jakobi wrote:
>> Hello,
>>
>> this is a resend of my initial mail, see below, to Al Viro (which sadly
>> was ignored).
>>
>> It's rc5 now, and this issue still remains. Putting some more lists on
>> the Cc now.
>>
>> Reverting the commit still works for me.
>>
>>
>> With best wishes,
>> Tobias
>>
>> ----------------
>>
>>
>> Hello Al,
>>
>> compiled a kernel on armv7 with torvalds/master today and getting some
>> errors during the modpost phase.
>>
>>> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
>> <snip>
>>
>> It seems like the commit 'arm: move exports to definitions' introduces
>> this issue.
>>
>> I quickly went over the commit and I noticed that while it removes the
>> EXPORT_SYMBOL()s for the bitops from armksyms.c, it doesn't move them
>> anywhere.
>>
>> Maybe you can take a look at this?
>>
>> With best wishes,
>> Tobias
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 11:43 ` Tobias Jakobi
0 siblings, 0 replies; 29+ messages in thread
From: Tobias Jakobi @ 2016-11-20 11:43 UTC (permalink / raw)
To: Russell King - ARM Linux, Tobias Jakobi
Cc: viro, linux-samsung-soc, linux-kernel, linux-arm-kernel
Hello Russell,
Russell King - ARM Linux wrote:
> None of the autobuilders are finding this problem, and they build a
> wide range of configurations. Maybe it's something specific to how
> you're building the kernel - can you give step by step instructions
> how to reproduce this please?
Just using plain make here, no cross-compiler or anything involved. gcc
is version 4.9.4.
Build platform is a Exynos4412 based ODROID-X2.
The complete log from the 'build modules' step:
> Building modules, stage 2.
> Kernel: arch/arm/boot/Image is ready
> MODPOST 52 modules
> XZKERN arch/arm/boot/compressed/piggy_data
> SHIPPED arch/arm/boot/compressed/lib1funcs.S
> SHIPPED arch/arm/boot/compressed/ashldi3.S
> SHIPPED arch/arm/boot/compressed/bswapsdi2.S
> AS arch/arm/boot/compressed/lib1funcs.o
> AS arch/arm/boot/compressed/ashldi3.o
> AS arch/arm/boot/compressed/bswapsdi2.o
> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/core/seq/snd-seq.ko] undefined!
> ERROR: "_set_bit" [net/bridge/bridge.ko] undefined!
> ERROR: "_clear_bit" [net/bridge/bridge.ko] undefined!
> ERROR: "_test_and_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> ERROR: "_set_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> ERROR: "_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> ERROR: "_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> ERROR: "_test_and_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> ERROR: "_clear_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> ERROR: "_test_and_clear_bit" [fs/fuse/fuse.ko] undefined!
> ERROR: "_set_bit" [fs/fuse/fuse.ko] undefined!
> ERROR: "_test_and_set_bit" [fs/fuse/fuse.ko] undefined!
> ERROR: "_clear_bit" [fs/fuse/fuse.ko] undefined!
> ERROR: "_test_and_clear_bit" [fs/cifs/cifs.ko] undefined!
> ERROR: "_set_bit" [fs/cifs/cifs.ko] undefined!
> ERROR: "_test_and_set_bit" [fs/cifs/cifs.ko] undefined!
> ERROR: "_clear_bit" [fs/cifs/cifs.ko] undefined!
> ERROR: "_test_and_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> ERROR: "_set_bit" [fs/btrfs/btrfs.ko] undefined!
> ERROR: "_test_and_set_bit" [fs/btrfs/btrfs.ko] undefined!
> ERROR: "_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> ERROR: "_test_and_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> ERROR: "_set_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> ERROR: "_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> ERROR: "_set_bit" [drivers/usb/gadget/libcomposite.ko] undefined!
> ERROR: "_set_bit" [drivers/usb/gadget/function/usb_f_rndis.ko] undefined!
> ERROR: "_test_and_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> ERROR: "_test_and_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> ERROR: "_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> ERROR: "_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> ERROR: "_test_and_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> ERROR: "_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> ERROR: "_test_and_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> ERROR: "_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> ERROR: "_clear_bit" [drivers/md/dm-crypt.ko] undefined!
> ERROR: "_set_bit" [drivers/md/dm-crypt.ko] undefined!
> ERROR: "_set_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> ERROR: "_clear_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> ERROR: "_test_and_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> ERROR: "_test_and_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> ERROR: "_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> ERROR: "_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> ERROR: "_set_bit" [drivers/bluetooth/btintel.ko] undefined!
> ERROR: "_set_bit" [drivers/bluetooth/btbcm.ko] undefined!
> scripts/Makefile.modpost:91: recipe for target '__modpost' failed
> make[1]: *** [__modpost] Error 1
> Makefile:1191: recipe for target 'modules' failed
> make: *** [modules] Error 2
This is the config I'm using for the build:
https://github.com/tobiasjakobi/odroid-environment/blob/master/sourcecode/system/vanilla-4.9-debug.conf
Let me know which additional information you need.
With best wishes,
Tobias
> On Sun, Nov 20, 2016 at 03:47:34AM +0100, Tobias Jakobi wrote:
>> Hello,
>>
>> this is a resend of my initial mail, see below, to Al Viro (which sadly
>> was ignored).
>>
>> It's rc5 now, and this issue still remains. Putting some more lists on
>> the Cc now.
>>
>> Reverting the commit still works for me.
>>
>>
>> With best wishes,
>> Tobias
>>
>> ----------------
>>
>>
>> Hello Al,
>>
>> compiled a kernel on armv7 with torvalds/master today and getting some
>> errors during the modpost phase.
>>
>>> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
>> <snip>
>>
>> It seems like the commit 'arm: move exports to definitions' introduces
>> this issue.
>>
>> I quickly went over the commit and I noticed that while it removes the
>> EXPORT_SYMBOL()s for the bitops from armksyms.c, it doesn't move them
>> anywhere.
>>
>> Maybe you can take a look at this?
>>
>> With best wishes,
>> Tobias
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 29+ messages in thread
* commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 11:43 ` Tobias Jakobi
0 siblings, 0 replies; 29+ messages in thread
From: Tobias Jakobi @ 2016-11-20 11:43 UTC (permalink / raw)
To: linux-arm-kernel
Hello Russell,
Russell King - ARM Linux wrote:
> None of the autobuilders are finding this problem, and they build a
> wide range of configurations. Maybe it's something specific to how
> you're building the kernel - can you give step by step instructions
> how to reproduce this please?
Just using plain make here, no cross-compiler or anything involved. gcc
is version 4.9.4.
Build platform is a Exynos4412 based ODROID-X2.
The complete log from the 'build modules' step:
> Building modules, stage 2.
> Kernel: arch/arm/boot/Image is ready
> MODPOST 52 modules
> XZKERN arch/arm/boot/compressed/piggy_data
> SHIPPED arch/arm/boot/compressed/lib1funcs.S
> SHIPPED arch/arm/boot/compressed/ashldi3.S
> SHIPPED arch/arm/boot/compressed/bswapsdi2.S
> AS arch/arm/boot/compressed/lib1funcs.o
> AS arch/arm/boot/compressed/ashldi3.o
> AS arch/arm/boot/compressed/bswapsdi2.o
> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
> ERROR: "_test_and_set_bit" [sound/core/seq/snd-seq.ko] undefined!
> ERROR: "_set_bit" [net/bridge/bridge.ko] undefined!
> ERROR: "_clear_bit" [net/bridge/bridge.ko] undefined!
> ERROR: "_test_and_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> ERROR: "_set_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> ERROR: "_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> ERROR: "_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> ERROR: "_test_and_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> ERROR: "_clear_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> ERROR: "_test_and_clear_bit" [fs/fuse/fuse.ko] undefined!
> ERROR: "_set_bit" [fs/fuse/fuse.ko] undefined!
> ERROR: "_test_and_set_bit" [fs/fuse/fuse.ko] undefined!
> ERROR: "_clear_bit" [fs/fuse/fuse.ko] undefined!
> ERROR: "_test_and_clear_bit" [fs/cifs/cifs.ko] undefined!
> ERROR: "_set_bit" [fs/cifs/cifs.ko] undefined!
> ERROR: "_test_and_set_bit" [fs/cifs/cifs.ko] undefined!
> ERROR: "_clear_bit" [fs/cifs/cifs.ko] undefined!
> ERROR: "_test_and_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> ERROR: "_set_bit" [fs/btrfs/btrfs.ko] undefined!
> ERROR: "_test_and_set_bit" [fs/btrfs/btrfs.ko] undefined!
> ERROR: "_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> ERROR: "_test_and_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> ERROR: "_set_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> ERROR: "_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> ERROR: "_set_bit" [drivers/usb/gadget/libcomposite.ko] undefined!
> ERROR: "_set_bit" [drivers/usb/gadget/function/usb_f_rndis.ko] undefined!
> ERROR: "_test_and_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> ERROR: "_test_and_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> ERROR: "_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> ERROR: "_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> ERROR: "_test_and_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> ERROR: "_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> ERROR: "_test_and_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> ERROR: "_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> ERROR: "_clear_bit" [drivers/md/dm-crypt.ko] undefined!
> ERROR: "_set_bit" [drivers/md/dm-crypt.ko] undefined!
> ERROR: "_set_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> ERROR: "_clear_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> ERROR: "_test_and_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> ERROR: "_test_and_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> ERROR: "_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> ERROR: "_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> ERROR: "_set_bit" [drivers/bluetooth/btintel.ko] undefined!
> ERROR: "_set_bit" [drivers/bluetooth/btbcm.ko] undefined!
> scripts/Makefile.modpost:91: recipe for target '__modpost' failed
> make[1]: *** [__modpost] Error 1
> Makefile:1191: recipe for target 'modules' failed
> make: *** [modules] Error 2
This is the config I'm using for the build:
https://github.com/tobiasjakobi/odroid-environment/blob/master/sourcecode/system/vanilla-4.9-debug.conf
Let me know which additional information you need.
With best wishes,
Tobias
> On Sun, Nov 20, 2016 at 03:47:34AM +0100, Tobias Jakobi wrote:
>> Hello,
>>
>> this is a resend of my initial mail, see below, to Al Viro (which sadly
>> was ignored).
>>
>> It's rc5 now, and this issue still remains. Putting some more lists on
>> the Cc now.
>>
>> Reverting the commit still works for me.
>>
>>
>> With best wishes,
>> Tobias
>>
>> ----------------
>>
>>
>> Hello Al,
>>
>> compiled a kernel on armv7 with torvalds/master today and getting some
>> errors during the modpost phase.
>>
>>> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
>> <snip>
>>
>> It seems like the commit 'arm: move exports to definitions' introduces
>> this issue.
>>
>> I quickly went over the commit and I noticed that while it removes the
>> EXPORT_SYMBOL()s for the bitops from armksyms.c, it doesn't move them
>> anywhere.
>>
>> Maybe you can take a look at this?
>>
>> With best wishes,
>> Tobias
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
2016-11-20 11:43 ` Tobias Jakobi
(?)
@ 2016-11-20 12:34 ` Russell King - ARM Linux
-1 siblings, 0 replies; 29+ messages in thread
From: Russell King - ARM Linux @ 2016-11-20 12:34 UTC (permalink / raw)
To: Tobias Jakobi; +Cc: linux-samsung-soc, viro, linux-arm-kernel, linux-kernel
On Sun, Nov 20, 2016 at 12:43:38PM +0100, Tobias Jakobi wrote:
> Hello Russell,
>
> Russell King - ARM Linux wrote:
> > None of the autobuilders are finding this problem, and they build a
> > wide range of configurations. Maybe it's something specific to how
> > you're building the kernel - can you give step by step instructions
> > how to reproduce this please?
> Just using plain make here, no cross-compiler or anything involved. gcc
> is version 4.9.4.
Hmm. The commit you mention was merged during the merge window, so
anyone building 4.9-rc1 or later should be seeing this problem, but
they aren't. I've built many kernels post -rc1, and I'm not seeing
the problem with my 4.7.4 cross compiler.
> Build platform is a Exynos4412 based ODROID-X2.
>
>
> The complete log from the 'build modules' step:
> > Building modules, stage 2.
> > Kernel: arch/arm/boot/Image is ready
> > MODPOST 52 modules
> > XZKERN arch/arm/boot/compressed/piggy_data
> > SHIPPED arch/arm/boot/compressed/lib1funcs.S
> > SHIPPED arch/arm/boot/compressed/ashldi3.S
> > SHIPPED arch/arm/boot/compressed/bswapsdi2.S
> > AS arch/arm/boot/compressed/lib1funcs.o
> > AS arch/arm/boot/compressed/ashldi3.o
> > AS arch/arm/boot/compressed/bswapsdi2.o
> > ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/core/seq/snd-seq.ko] undefined!
> > ERROR: "_set_bit" [net/bridge/bridge.ko] undefined!
> > ERROR: "_clear_bit" [net/bridge/bridge.ko] undefined!
> > ERROR: "_test_and_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> > ERROR: "_set_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> > ERROR: "_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> > ERROR: "_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> > ERROR: "_test_and_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> > ERROR: "_clear_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> > ERROR: "_test_and_clear_bit" [fs/fuse/fuse.ko] undefined!
> > ERROR: "_set_bit" [fs/fuse/fuse.ko] undefined!
> > ERROR: "_test_and_set_bit" [fs/fuse/fuse.ko] undefined!
> > ERROR: "_clear_bit" [fs/fuse/fuse.ko] undefined!
> > ERROR: "_test_and_clear_bit" [fs/cifs/cifs.ko] undefined!
> > ERROR: "_set_bit" [fs/cifs/cifs.ko] undefined!
> > ERROR: "_test_and_set_bit" [fs/cifs/cifs.ko] undefined!
> > ERROR: "_clear_bit" [fs/cifs/cifs.ko] undefined!
> > ERROR: "_test_and_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> > ERROR: "_set_bit" [fs/btrfs/btrfs.ko] undefined!
> > ERROR: "_test_and_set_bit" [fs/btrfs/btrfs.ko] undefined!
> > ERROR: "_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> > ERROR: "_test_and_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> > ERROR: "_set_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> > ERROR: "_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> > ERROR: "_set_bit" [drivers/usb/gadget/libcomposite.ko] undefined!
> > ERROR: "_set_bit" [drivers/usb/gadget/function/usb_f_rndis.ko] undefined!
> > ERROR: "_test_and_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> > ERROR: "_test_and_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> > ERROR: "_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> > ERROR: "_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> > ERROR: "_test_and_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> > ERROR: "_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> > ERROR: "_test_and_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> > ERROR: "_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> > ERROR: "_clear_bit" [drivers/md/dm-crypt.ko] undefined!
> > ERROR: "_set_bit" [drivers/md/dm-crypt.ko] undefined!
> > ERROR: "_set_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> > ERROR: "_clear_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> > ERROR: "_test_and_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> > ERROR: "_test_and_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> > ERROR: "_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> > ERROR: "_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> > ERROR: "_set_bit" [drivers/bluetooth/btintel.ko] undefined!
> > ERROR: "_set_bit" [drivers/bluetooth/btbcm.ko] undefined!
> > scripts/Makefile.modpost:91: recipe for target '__modpost' failed
> > make[1]: *** [__modpost] Error 1
> > Makefile:1191: recipe for target 'modules' failed
> > make: *** [modules] Error 2
>
>
> This is the config I'm using for the build:
> https://github.com/tobiasjakobi/odroid-environment/blob/master/sourcecode/system/vanilla-4.9-debug.conf
You have CONFIG_TRIM_UNUSED_KSYMS enabled - I wonder if that's the
issue. I've just enabled that here, and building I see:
EXPORTS lib/lib-ksyms.o
LD lib/built-in.o
CHK include/generated/autoksyms.h
KSYMS symbols: before=0, after=2413, changed=2413
UPD include/generated/autoksyms.h
and then the build seems to restart from the very beginning, which seems
rather fishy - it doubles the build time of the kernel. The second
build doesn't even hit any ccache entries from the first build. Then we
get through the rebuild, and I get:
EXPORTS lib/lib-ksyms.o
LD lib/built-in.o
CHK include/generated/autoksyms.h
LD vmlinux.o
...
LD vmlinux
SORTEX vmlinux
SYSMAP System.map
Building modules, stage 2.
OBJCOPY arch/arm/boot/Image
Kernel: arch/arm/boot/Image is ready
AS arch/arm/boot/compressed/head.o
LZO arch/arm/boot/compressed/piggy_data
MODPOST 465 modules
ERROR: CC arch/arm/boot/compressed/misc.o
"_clear_bit" [net/sched/sch_teql.ko] undefined!
ERROR: "_set_bit" [net/sched/sch_teql.ko] undefined!
ERROR: "_set_bit" [net/sched/cls_u32.ko] undefined!
ERROR: "_test_and_set_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
ERROR: "_clear_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
ERROR: "_test_and_clear_bit" [net/mac80211/mac80211.ko] undefined!
ERROR: "_set_bit" [net/mac80211/mac80211.ko] undefined!
ERROR: "_test_and_set_bit" [net/mac80211/mac80211.ko] undefined!
ERROR: "_clear_bit" [net/mac80211/mac80211.ko] undefined!
So yes, it's caused by this ksyms trimming.
Now, the thing is that include/generated/autoksyms.h contains:
#define __KSYM__change_bit 1
#define __KSYM__clear_bit 1
#define __KSYM__set_bit 1
#define __KSYM__test_and_change_bit 1
#define __KSYM__test_and_clear_bit 1
#define __KSYM__test_and_set_bit 1
amongst many other stuff - presumably this is a list of ksyms which
should be included, rather than a list of what should be excluded.
I'm afraid that I never saw the patches which changed the way the ksyms
stuff worked for the assembly files, and these patches have caused
several problems for ARM. I'm not aware of what the changes were, or
how the damn exports now work, so I'm currently at a loss what to
suggest at the moment, other than to disable CONFIG_TRIM_UNUSED_KSYMS in
your configuration until someone can work out wtf is going on.
I guess I'm going to have to work out how this stuff now works - don't
expect a solution quickly, especially as building with this option
enabled is soo time consuming (like, half an hour per build.)
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 12:34 ` Russell King - ARM Linux
0 siblings, 0 replies; 29+ messages in thread
From: Russell King - ARM Linux @ 2016-11-20 12:34 UTC (permalink / raw)
To: Tobias Jakobi; +Cc: linux-samsung-soc, viro, linux-arm-kernel, linux-kernel
On Sun, Nov 20, 2016 at 12:43:38PM +0100, Tobias Jakobi wrote:
> Hello Russell,
>
> Russell King - ARM Linux wrote:
> > None of the autobuilders are finding this problem, and they build a
> > wide range of configurations. Maybe it's something specific to how
> > you're building the kernel - can you give step by step instructions
> > how to reproduce this please?
> Just using plain make here, no cross-compiler or anything involved. gcc
> is version 4.9.4.
Hmm. The commit you mention was merged during the merge window, so
anyone building 4.9-rc1 or later should be seeing this problem, but
they aren't. I've built many kernels post -rc1, and I'm not seeing
the problem with my 4.7.4 cross compiler.
> Build platform is a Exynos4412 based ODROID-X2.
>
>
> The complete log from the 'build modules' step:
> > Building modules, stage 2.
> > Kernel: arch/arm/boot/Image is ready
> > MODPOST 52 modules
> > XZKERN arch/arm/boot/compressed/piggy_data
> > SHIPPED arch/arm/boot/compressed/lib1funcs.S
> > SHIPPED arch/arm/boot/compressed/ashldi3.S
> > SHIPPED arch/arm/boot/compressed/bswapsdi2.S
> > AS arch/arm/boot/compressed/lib1funcs.o
> > AS arch/arm/boot/compressed/ashldi3.o
> > AS arch/arm/boot/compressed/bswapsdi2.o
> > ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/core/seq/snd-seq.ko] undefined!
> > ERROR: "_set_bit" [net/bridge/bridge.ko] undefined!
> > ERROR: "_clear_bit" [net/bridge/bridge.ko] undefined!
> > ERROR: "_test_and_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> > ERROR: "_set_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> > ERROR: "_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> > ERROR: "_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> > ERROR: "_test_and_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> > ERROR: "_clear_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> > ERROR: "_test_and_clear_bit" [fs/fuse/fuse.ko] undefined!
> > ERROR: "_set_bit" [fs/fuse/fuse.ko] undefined!
> > ERROR: "_test_and_set_bit" [fs/fuse/fuse.ko] undefined!
> > ERROR: "_clear_bit" [fs/fuse/fuse.ko] undefined!
> > ERROR: "_test_and_clear_bit" [fs/cifs/cifs.ko] undefined!
> > ERROR: "_set_bit" [fs/cifs/cifs.ko] undefined!
> > ERROR: "_test_and_set_bit" [fs/cifs/cifs.ko] undefined!
> > ERROR: "_clear_bit" [fs/cifs/cifs.ko] undefined!
> > ERROR: "_test_and_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> > ERROR: "_set_bit" [fs/btrfs/btrfs.ko] undefined!
> > ERROR: "_test_and_set_bit" [fs/btrfs/btrfs.ko] undefined!
> > ERROR: "_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> > ERROR: "_test_and_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> > ERROR: "_set_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> > ERROR: "_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> > ERROR: "_set_bit" [drivers/usb/gadget/libcomposite.ko] undefined!
> > ERROR: "_set_bit" [drivers/usb/gadget/function/usb_f_rndis.ko] undefined!
> > ERROR: "_test_and_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> > ERROR: "_test_and_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> > ERROR: "_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> > ERROR: "_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> > ERROR: "_test_and_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> > ERROR: "_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> > ERROR: "_test_and_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> > ERROR: "_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> > ERROR: "_clear_bit" [drivers/md/dm-crypt.ko] undefined!
> > ERROR: "_set_bit" [drivers/md/dm-crypt.ko] undefined!
> > ERROR: "_set_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> > ERROR: "_clear_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> > ERROR: "_test_and_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> > ERROR: "_test_and_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> > ERROR: "_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> > ERROR: "_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> > ERROR: "_set_bit" [drivers/bluetooth/btintel.ko] undefined!
> > ERROR: "_set_bit" [drivers/bluetooth/btbcm.ko] undefined!
> > scripts/Makefile.modpost:91: recipe for target '__modpost' failed
> > make[1]: *** [__modpost] Error 1
> > Makefile:1191: recipe for target 'modules' failed
> > make: *** [modules] Error 2
>
>
> This is the config I'm using for the build:
> https://github.com/tobiasjakobi/odroid-environment/blob/master/sourcecode/system/vanilla-4.9-debug.conf
You have CONFIG_TRIM_UNUSED_KSYMS enabled - I wonder if that's the
issue. I've just enabled that here, and building I see:
EXPORTS lib/lib-ksyms.o
LD lib/built-in.o
CHK include/generated/autoksyms.h
KSYMS symbols: before=0, after=2413, changed=2413
UPD include/generated/autoksyms.h
and then the build seems to restart from the very beginning, which seems
rather fishy - it doubles the build time of the kernel. The second
build doesn't even hit any ccache entries from the first build. Then we
get through the rebuild, and I get:
EXPORTS lib/lib-ksyms.o
LD lib/built-in.o
CHK include/generated/autoksyms.h
LD vmlinux.o
...
LD vmlinux
SORTEX vmlinux
SYSMAP System.map
Building modules, stage 2.
OBJCOPY arch/arm/boot/Image
Kernel: arch/arm/boot/Image is ready
AS arch/arm/boot/compressed/head.o
LZO arch/arm/boot/compressed/piggy_data
MODPOST 465 modules
ERROR: CC arch/arm/boot/compressed/misc.o
"_clear_bit" [net/sched/sch_teql.ko] undefined!
ERROR: "_set_bit" [net/sched/sch_teql.ko] undefined!
ERROR: "_set_bit" [net/sched/cls_u32.ko] undefined!
ERROR: "_test_and_set_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
ERROR: "_clear_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
ERROR: "_test_and_clear_bit" [net/mac80211/mac80211.ko] undefined!
ERROR: "_set_bit" [net/mac80211/mac80211.ko] undefined!
ERROR: "_test_and_set_bit" [net/mac80211/mac80211.ko] undefined!
ERROR: "_clear_bit" [net/mac80211/mac80211.ko] undefined!
So yes, it's caused by this ksyms trimming.
Now, the thing is that include/generated/autoksyms.h contains:
#define __KSYM__change_bit 1
#define __KSYM__clear_bit 1
#define __KSYM__set_bit 1
#define __KSYM__test_and_change_bit 1
#define __KSYM__test_and_clear_bit 1
#define __KSYM__test_and_set_bit 1
amongst many other stuff - presumably this is a list of ksyms which
should be included, rather than a list of what should be excluded.
I'm afraid that I never saw the patches which changed the way the ksyms
stuff worked for the assembly files, and these patches have caused
several problems for ARM. I'm not aware of what the changes were, or
how the damn exports now work, so I'm currently at a loss what to
suggest at the moment, other than to disable CONFIG_TRIM_UNUSED_KSYMS in
your configuration until someone can work out wtf is going on.
I guess I'm going to have to work out how this stuff now works - don't
expect a solution quickly, especially as building with this option
enabled is soo time consuming (like, half an hour per build.)
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 29+ messages in thread
* commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 12:34 ` Russell King - ARM Linux
0 siblings, 0 replies; 29+ messages in thread
From: Russell King - ARM Linux @ 2016-11-20 12:34 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Nov 20, 2016 at 12:43:38PM +0100, Tobias Jakobi wrote:
> Hello Russell,
>
> Russell King - ARM Linux wrote:
> > None of the autobuilders are finding this problem, and they build a
> > wide range of configurations. Maybe it's something specific to how
> > you're building the kernel - can you give step by step instructions
> > how to reproduce this please?
> Just using plain make here, no cross-compiler or anything involved. gcc
> is version 4.9.4.
Hmm. The commit you mention was merged during the merge window, so
anyone building 4.9-rc1 or later should be seeing this problem, but
they aren't. I've built many kernels post -rc1, and I'm not seeing
the problem with my 4.7.4 cross compiler.
> Build platform is a Exynos4412 based ODROID-X2.
>
>
> The complete log from the 'build modules' step:
> > Building modules, stage 2.
> > Kernel: arch/arm/boot/Image is ready
> > MODPOST 52 modules
> > XZKERN arch/arm/boot/compressed/piggy_data
> > SHIPPED arch/arm/boot/compressed/lib1funcs.S
> > SHIPPED arch/arm/boot/compressed/ashldi3.S
> > SHIPPED arch/arm/boot/compressed/bswapsdi2.S
> > AS arch/arm/boot/compressed/lib1funcs.o
> > AS arch/arm/boot/compressed/ashldi3.o
> > AS arch/arm/boot/compressed/bswapsdi2.o
> > ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> > ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> > ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
> > ERROR: "_test_and_set_bit" [sound/core/seq/snd-seq.ko] undefined!
> > ERROR: "_set_bit" [net/bridge/bridge.ko] undefined!
> > ERROR: "_clear_bit" [net/bridge/bridge.ko] undefined!
> > ERROR: "_test_and_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> > ERROR: "_set_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> > ERROR: "_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> > ERROR: "_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> > ERROR: "_test_and_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> > ERROR: "_clear_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> > ERROR: "_test_and_clear_bit" [fs/fuse/fuse.ko] undefined!
> > ERROR: "_set_bit" [fs/fuse/fuse.ko] undefined!
> > ERROR: "_test_and_set_bit" [fs/fuse/fuse.ko] undefined!
> > ERROR: "_clear_bit" [fs/fuse/fuse.ko] undefined!
> > ERROR: "_test_and_clear_bit" [fs/cifs/cifs.ko] undefined!
> > ERROR: "_set_bit" [fs/cifs/cifs.ko] undefined!
> > ERROR: "_test_and_set_bit" [fs/cifs/cifs.ko] undefined!
> > ERROR: "_clear_bit" [fs/cifs/cifs.ko] undefined!
> > ERROR: "_test_and_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> > ERROR: "_set_bit" [fs/btrfs/btrfs.ko] undefined!
> > ERROR: "_test_and_set_bit" [fs/btrfs/btrfs.ko] undefined!
> > ERROR: "_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> > ERROR: "_test_and_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> > ERROR: "_set_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> > ERROR: "_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> > ERROR: "_set_bit" [drivers/usb/gadget/libcomposite.ko] undefined!
> > ERROR: "_set_bit" [drivers/usb/gadget/function/usb_f_rndis.ko] undefined!
> > ERROR: "_test_and_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> > ERROR: "_test_and_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> > ERROR: "_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> > ERROR: "_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> > ERROR: "_test_and_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> > ERROR: "_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> > ERROR: "_test_and_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> > ERROR: "_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> > ERROR: "_clear_bit" [drivers/md/dm-crypt.ko] undefined!
> > ERROR: "_set_bit" [drivers/md/dm-crypt.ko] undefined!
> > ERROR: "_set_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> > ERROR: "_clear_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> > ERROR: "_test_and_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> > ERROR: "_test_and_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> > ERROR: "_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> > ERROR: "_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> > ERROR: "_set_bit" [drivers/bluetooth/btintel.ko] undefined!
> > ERROR: "_set_bit" [drivers/bluetooth/btbcm.ko] undefined!
> > scripts/Makefile.modpost:91: recipe for target '__modpost' failed
> > make[1]: *** [__modpost] Error 1
> > Makefile:1191: recipe for target 'modules' failed
> > make: *** [modules] Error 2
>
>
> This is the config I'm using for the build:
> https://github.com/tobiasjakobi/odroid-environment/blob/master/sourcecode/system/vanilla-4.9-debug.conf
You have CONFIG_TRIM_UNUSED_KSYMS enabled - I wonder if that's the
issue. I've just enabled that here, and building I see:
EXPORTS lib/lib-ksyms.o
LD lib/built-in.o
CHK include/generated/autoksyms.h
KSYMS symbols: before=0, after=2413, changed=2413
UPD include/generated/autoksyms.h
and then the build seems to restart from the very beginning, which seems
rather fishy - it doubles the build time of the kernel. The second
build doesn't even hit any ccache entries from the first build. Then we
get through the rebuild, and I get:
EXPORTS lib/lib-ksyms.o
LD lib/built-in.o
CHK include/generated/autoksyms.h
LD vmlinux.o
...
LD vmlinux
SORTEX vmlinux
SYSMAP System.map
Building modules, stage 2.
OBJCOPY arch/arm/boot/Image
Kernel: arch/arm/boot/Image is ready
AS arch/arm/boot/compressed/head.o
LZO arch/arm/boot/compressed/piggy_data
MODPOST 465 modules
ERROR: CC arch/arm/boot/compressed/misc.o
"_clear_bit" [net/sched/sch_teql.ko] undefined!
ERROR: "_set_bit" [net/sched/sch_teql.ko] undefined!
ERROR: "_set_bit" [net/sched/cls_u32.ko] undefined!
ERROR: "_test_and_set_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
ERROR: "_clear_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
ERROR: "_test_and_clear_bit" [net/mac80211/mac80211.ko] undefined!
ERROR: "_set_bit" [net/mac80211/mac80211.ko] undefined!
ERROR: "_test_and_set_bit" [net/mac80211/mac80211.ko] undefined!
ERROR: "_clear_bit" [net/mac80211/mac80211.ko] undefined!
So yes, it's caused by this ksyms trimming.
Now, the thing is that include/generated/autoksyms.h contains:
#define __KSYM__change_bit 1
#define __KSYM__clear_bit 1
#define __KSYM__set_bit 1
#define __KSYM__test_and_change_bit 1
#define __KSYM__test_and_clear_bit 1
#define __KSYM__test_and_set_bit 1
amongst many other stuff - presumably this is a list of ksyms which
should be included, rather than a list of what should be excluded.
I'm afraid that I never saw the patches which changed the way the ksyms
stuff worked for the assembly files, and these patches have caused
several problems for ARM. I'm not aware of what the changes were, or
how the damn exports now work, so I'm currently at a loss what to
suggest at the moment, other than to disable CONFIG_TRIM_UNUSED_KSYMS in
your configuration until someone can work out wtf is going on.
I guess I'm going to have to work out how this stuff now works - don't
expect a solution quickly, especially as building with this option
enabled is soo time consuming (like, half an hour per build.)
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
2016-11-20 12:34 ` Russell King - ARM Linux
(?)
@ 2016-11-20 12:56 ` Tobias Jakobi
-1 siblings, 0 replies; 29+ messages in thread
From: Tobias Jakobi @ 2016-11-20 12:56 UTC (permalink / raw)
To: Russell King - ARM Linux, Tobias Jakobi
Cc: linux-samsung-soc, viro, linux-arm-kernel, linux-kernel, nicolas.pitre
Hey Russell,
thanks for the quick reply and looking into this!
Added Nicolas Pitre to Cc since the ksym trim stuff came from him.
Russell King - ARM Linux wrote:
> On Sun, Nov 20, 2016 at 12:43:38PM +0100, Tobias Jakobi wrote:
>> Hello Russell,
>>
>> Russell King - ARM Linux wrote:
>>> None of the autobuilders are finding this problem, and they build a
>>> wide range of configurations. Maybe it's something specific to how
>>> you're building the kernel - can you give step by step instructions
>>> how to reproduce this please?
>> Just using plain make here, no cross-compiler or anything involved. gcc
>> is version 4.9.4.
>
> Hmm. The commit you mention was merged during the merge window, so
> anyone building 4.9-rc1 or later should be seeing this problem, but
> they aren't. I've built many kernels post -rc1, and I'm not seeing
> the problem with my 4.7.4 cross compiler.
>
>> Build platform is a Exynos4412 based ODROID-X2.
>>
>>
>> The complete log from the 'build modules' step:
>>> Building modules, stage 2.
>>> Kernel: arch/arm/boot/Image is ready
>>> MODPOST 52 modules
>>> XZKERN arch/arm/boot/compressed/piggy_data
>>> SHIPPED arch/arm/boot/compressed/lib1funcs.S
>>> SHIPPED arch/arm/boot/compressed/ashldi3.S
>>> SHIPPED arch/arm/boot/compressed/bswapsdi2.S
>>> AS arch/arm/boot/compressed/lib1funcs.o
>>> AS arch/arm/boot/compressed/ashldi3.o
>>> AS arch/arm/boot/compressed/bswapsdi2.o
>>> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/core/seq/snd-seq.ko] undefined!
>>> ERROR: "_set_bit" [net/bridge/bridge.ko] undefined!
>>> ERROR: "_clear_bit" [net/bridge/bridge.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
>>> ERROR: "_set_bit" [net/bluetooth/hidp/hidp.ko] undefined!
>>> ERROR: "_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
>>> ERROR: "_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
>>> ERROR: "_test_and_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
>>> ERROR: "_clear_bit" [net/bluetooth/bnep/bnep.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [fs/fuse/fuse.ko] undefined!
>>> ERROR: "_set_bit" [fs/fuse/fuse.ko] undefined!
>>> ERROR: "_test_and_set_bit" [fs/fuse/fuse.ko] undefined!
>>> ERROR: "_clear_bit" [fs/fuse/fuse.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [fs/cifs/cifs.ko] undefined!
>>> ERROR: "_set_bit" [fs/cifs/cifs.ko] undefined!
>>> ERROR: "_test_and_set_bit" [fs/cifs/cifs.ko] undefined!
>>> ERROR: "_clear_bit" [fs/cifs/cifs.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [fs/btrfs/btrfs.ko] undefined!
>>> ERROR: "_set_bit" [fs/btrfs/btrfs.ko] undefined!
>>> ERROR: "_test_and_set_bit" [fs/btrfs/btrfs.ko] undefined!
>>> ERROR: "_clear_bit" [fs/btrfs/btrfs.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
>>> ERROR: "_set_bit" [drivers/usb/storage/usb-storage.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
>>> ERROR: "_set_bit" [drivers/usb/gadget/libcomposite.ko] undefined!
>>> ERROR: "_set_bit" [drivers/usb/gadget/function/usb_f_rndis.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
>>> ERROR: "_test_and_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
>>> ERROR: "_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
>>> ERROR: "_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
>>> ERROR: "_test_and_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/md/dm-crypt.ko] undefined!
>>> ERROR: "_set_bit" [drivers/md/dm-crypt.ko] undefined!
>>> ERROR: "_set_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
>>> ERROR: "_test_and_set_bit" [drivers/bluetooth/btusb.ko] undefined!
>>> ERROR: "_set_bit" [drivers/bluetooth/btusb.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
>>> ERROR: "_set_bit" [drivers/bluetooth/btintel.ko] undefined!
>>> ERROR: "_set_bit" [drivers/bluetooth/btbcm.ko] undefined!
>>> scripts/Makefile.modpost:91: recipe for target '__modpost' failed
>>> make[1]: *** [__modpost] Error 1
>>> Makefile:1191: recipe for target 'modules' failed
>>> make: *** [modules] Error 2
>>
>>
>> This is the config I'm using for the build:
>> https://github.com/tobiasjakobi/odroid-environment/blob/master/sourcecode/system/vanilla-4.9-debug.conf
>
> You have CONFIG_TRIM_UNUSED_KSYMS enabled - I wonder if that's the
> issue. I've just enabled that here, and building I see:
Thanks, I had this enabled on purpose since I don't need any out-of-tree
drivers for this board.
I'll check if disabling TRIM_UNUSED_KSYMS also does the trick for me.
With best wishes,
Tobias
> EXPORTS lib/lib-ksyms.o
> LD lib/built-in.o
> CHK include/generated/autoksyms.h
> KSYMS symbols: before=0, after=2413, changed=2413
> UPD include/generated/autoksyms.h
>
> and then the build seems to restart from the very beginning, which seems
> rather fishy - it doubles the build time of the kernel. The second
> build doesn't even hit any ccache entries from the first build. Then we
> get through the rebuild, and I get:
>
> EXPORTS lib/lib-ksyms.o
> LD lib/built-in.o
> CHK include/generated/autoksyms.h
> LD vmlinux.o
> ...
> LD vmlinux
> SORTEX vmlinux
> SYSMAP System.map
> Building modules, stage 2.
> OBJCOPY arch/arm/boot/Image
> Kernel: arch/arm/boot/Image is ready
> AS arch/arm/boot/compressed/head.o
> LZO arch/arm/boot/compressed/piggy_data
> MODPOST 465 modules
> ERROR: CC arch/arm/boot/compressed/misc.o
> "_clear_bit" [net/sched/sch_teql.ko] undefined!
> ERROR: "_set_bit" [net/sched/sch_teql.ko] undefined!
> ERROR: "_set_bit" [net/sched/cls_u32.ko] undefined!
> ERROR: "_test_and_set_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
> ERROR: "_clear_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
> ERROR: "_test_and_clear_bit" [net/mac80211/mac80211.ko] undefined!
> ERROR: "_set_bit" [net/mac80211/mac80211.ko] undefined!
> ERROR: "_test_and_set_bit" [net/mac80211/mac80211.ko] undefined!
> ERROR: "_clear_bit" [net/mac80211/mac80211.ko] undefined!
>
> So yes, it's caused by this ksyms trimming.
>
> Now, the thing is that include/generated/autoksyms.h contains:
>
> #define __KSYM__change_bit 1
> #define __KSYM__clear_bit 1
> #define __KSYM__set_bit 1
> #define __KSYM__test_and_change_bit 1
> #define __KSYM__test_and_clear_bit 1
> #define __KSYM__test_and_set_bit 1
>
> amongst many other stuff - presumably this is a list of ksyms which
> should be included, rather than a list of what should be excluded.
>
> I'm afraid that I never saw the patches which changed the way the ksyms
> stuff worked for the assembly files, and these patches have caused
> several problems for ARM. I'm not aware of what the changes were, or
> how the damn exports now work, so I'm currently at a loss what to
> suggest at the moment, other than to disable CONFIG_TRIM_UNUSED_KSYMS in
> your configuration until someone can work out wtf is going on.
>
> I guess I'm going to have to work out how this stuff now works - don't
> expect a solution quickly, especially as building with this option
> enabled is soo time consuming (like, half an hour per build.)
>
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 12:56 ` Tobias Jakobi
0 siblings, 0 replies; 29+ messages in thread
From: Tobias Jakobi @ 2016-11-20 12:56 UTC (permalink / raw)
To: Russell King - ARM Linux, Tobias Jakobi
Cc: linux-samsung-soc, viro, linux-arm-kernel, linux-kernel, nicolas.pitre
Hey Russell,
thanks for the quick reply and looking into this!
Added Nicolas Pitre to Cc since the ksym trim stuff came from him.
Russell King - ARM Linux wrote:
> On Sun, Nov 20, 2016 at 12:43:38PM +0100, Tobias Jakobi wrote:
>> Hello Russell,
>>
>> Russell King - ARM Linux wrote:
>>> None of the autobuilders are finding this problem, and they build a
>>> wide range of configurations. Maybe it's something specific to how
>>> you're building the kernel - can you give step by step instructions
>>> how to reproduce this please?
>> Just using plain make here, no cross-compiler or anything involved. gcc
>> is version 4.9.4.
>
> Hmm. The commit you mention was merged during the merge window, so
> anyone building 4.9-rc1 or later should be seeing this problem, but
> they aren't. I've built many kernels post -rc1, and I'm not seeing
> the problem with my 4.7.4 cross compiler.
>
>> Build platform is a Exynos4412 based ODROID-X2.
>>
>>
>> The complete log from the 'build modules' step:
>>> Building modules, stage 2.
>>> Kernel: arch/arm/boot/Image is ready
>>> MODPOST 52 modules
>>> XZKERN arch/arm/boot/compressed/piggy_data
>>> SHIPPED arch/arm/boot/compressed/lib1funcs.S
>>> SHIPPED arch/arm/boot/compressed/ashldi3.S
>>> SHIPPED arch/arm/boot/compressed/bswapsdi2.S
>>> AS arch/arm/boot/compressed/lib1funcs.o
>>> AS arch/arm/boot/compressed/ashldi3.o
>>> AS arch/arm/boot/compressed/bswapsdi2.o
>>> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/core/seq/snd-seq.ko] undefined!
>>> ERROR: "_set_bit" [net/bridge/bridge.ko] undefined!
>>> ERROR: "_clear_bit" [net/bridge/bridge.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
>>> ERROR: "_set_bit" [net/bluetooth/hidp/hidp.ko] undefined!
>>> ERROR: "_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
>>> ERROR: "_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
>>> ERROR: "_test_and_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
>>> ERROR: "_clear_bit" [net/bluetooth/bnep/bnep.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [fs/fuse/fuse.ko] undefined!
>>> ERROR: "_set_bit" [fs/fuse/fuse.ko] undefined!
>>> ERROR: "_test_and_set_bit" [fs/fuse/fuse.ko] undefined!
>>> ERROR: "_clear_bit" [fs/fuse/fuse.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [fs/cifs/cifs.ko] undefined!
>>> ERROR: "_set_bit" [fs/cifs/cifs.ko] undefined!
>>> ERROR: "_test_and_set_bit" [fs/cifs/cifs.ko] undefined!
>>> ERROR: "_clear_bit" [fs/cifs/cifs.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [fs/btrfs/btrfs.ko] undefined!
>>> ERROR: "_set_bit" [fs/btrfs/btrfs.ko] undefined!
>>> ERROR: "_test_and_set_bit" [fs/btrfs/btrfs.ko] undefined!
>>> ERROR: "_clear_bit" [fs/btrfs/btrfs.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
>>> ERROR: "_set_bit" [drivers/usb/storage/usb-storage.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
>>> ERROR: "_set_bit" [drivers/usb/gadget/libcomposite.ko] undefined!
>>> ERROR: "_set_bit" [drivers/usb/gadget/function/usb_f_rndis.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
>>> ERROR: "_test_and_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
>>> ERROR: "_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
>>> ERROR: "_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
>>> ERROR: "_test_and_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/md/dm-crypt.ko] undefined!
>>> ERROR: "_set_bit" [drivers/md/dm-crypt.ko] undefined!
>>> ERROR: "_set_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
>>> ERROR: "_test_and_set_bit" [drivers/bluetooth/btusb.ko] undefined!
>>> ERROR: "_set_bit" [drivers/bluetooth/btusb.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
>>> ERROR: "_set_bit" [drivers/bluetooth/btintel.ko] undefined!
>>> ERROR: "_set_bit" [drivers/bluetooth/btbcm.ko] undefined!
>>> scripts/Makefile.modpost:91: recipe for target '__modpost' failed
>>> make[1]: *** [__modpost] Error 1
>>> Makefile:1191: recipe for target 'modules' failed
>>> make: *** [modules] Error 2
>>
>>
>> This is the config I'm using for the build:
>> https://github.com/tobiasjakobi/odroid-environment/blob/master/sourcecode/system/vanilla-4.9-debug.conf
>
> You have CONFIG_TRIM_UNUSED_KSYMS enabled - I wonder if that's the
> issue. I've just enabled that here, and building I see:
Thanks, I had this enabled on purpose since I don't need any out-of-tree
drivers for this board.
I'll check if disabling TRIM_UNUSED_KSYMS also does the trick for me.
With best wishes,
Tobias
> EXPORTS lib/lib-ksyms.o
> LD lib/built-in.o
> CHK include/generated/autoksyms.h
> KSYMS symbols: before=0, after=2413, changed=2413
> UPD include/generated/autoksyms.h
>
> and then the build seems to restart from the very beginning, which seems
> rather fishy - it doubles the build time of the kernel. The second
> build doesn't even hit any ccache entries from the first build. Then we
> get through the rebuild, and I get:
>
> EXPORTS lib/lib-ksyms.o
> LD lib/built-in.o
> CHK include/generated/autoksyms.h
> LD vmlinux.o
> ...
> LD vmlinux
> SORTEX vmlinux
> SYSMAP System.map
> Building modules, stage 2.
> OBJCOPY arch/arm/boot/Image
> Kernel: arch/arm/boot/Image is ready
> AS arch/arm/boot/compressed/head.o
> LZO arch/arm/boot/compressed/piggy_data
> MODPOST 465 modules
> ERROR: CC arch/arm/boot/compressed/misc.o
> "_clear_bit" [net/sched/sch_teql.ko] undefined!
> ERROR: "_set_bit" [net/sched/sch_teql.ko] undefined!
> ERROR: "_set_bit" [net/sched/cls_u32.ko] undefined!
> ERROR: "_test_and_set_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
> ERROR: "_clear_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
> ERROR: "_test_and_clear_bit" [net/mac80211/mac80211.ko] undefined!
> ERROR: "_set_bit" [net/mac80211/mac80211.ko] undefined!
> ERROR: "_test_and_set_bit" [net/mac80211/mac80211.ko] undefined!
> ERROR: "_clear_bit" [net/mac80211/mac80211.ko] undefined!
>
> So yes, it's caused by this ksyms trimming.
>
> Now, the thing is that include/generated/autoksyms.h contains:
>
> #define __KSYM__change_bit 1
> #define __KSYM__clear_bit 1
> #define __KSYM__set_bit 1
> #define __KSYM__test_and_change_bit 1
> #define __KSYM__test_and_clear_bit 1
> #define __KSYM__test_and_set_bit 1
>
> amongst many other stuff - presumably this is a list of ksyms which
> should be included, rather than a list of what should be excluded.
>
> I'm afraid that I never saw the patches which changed the way the ksyms
> stuff worked for the assembly files, and these patches have caused
> several problems for ARM. I'm not aware of what the changes were, or
> how the damn exports now work, so I'm currently at a loss what to
> suggest at the moment, other than to disable CONFIG_TRIM_UNUSED_KSYMS in
> your configuration until someone can work out wtf is going on.
>
> I guess I'm going to have to work out how this stuff now works - don't
> expect a solution quickly, especially as building with this option
> enabled is soo time consuming (like, half an hour per build.)
>
^ permalink raw reply [flat|nested] 29+ messages in thread
* commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 12:56 ` Tobias Jakobi
0 siblings, 0 replies; 29+ messages in thread
From: Tobias Jakobi @ 2016-11-20 12:56 UTC (permalink / raw)
To: linux-arm-kernel
Hey Russell,
thanks for the quick reply and looking into this!
Added Nicolas Pitre to Cc since the ksym trim stuff came from him.
Russell King - ARM Linux wrote:
> On Sun, Nov 20, 2016 at 12:43:38PM +0100, Tobias Jakobi wrote:
>> Hello Russell,
>>
>> Russell King - ARM Linux wrote:
>>> None of the autobuilders are finding this problem, and they build a
>>> wide range of configurations. Maybe it's something specific to how
>>> you're building the kernel - can you give step by step instructions
>>> how to reproduce this please?
>> Just using plain make here, no cross-compiler or anything involved. gcc
>> is version 4.9.4.
>
> Hmm. The commit you mention was merged during the merge window, so
> anyone building 4.9-rc1 or later should be seeing this problem, but
> they aren't. I've built many kernels post -rc1, and I'm not seeing
> the problem with my 4.7.4 cross compiler.
>
>> Build platform is a Exynos4412 based ODROID-X2.
>>
>>
>> The complete log from the 'build modules' step:
>>> Building modules, stage 2.
>>> Kernel: arch/arm/boot/Image is ready
>>> MODPOST 52 modules
>>> XZKERN arch/arm/boot/compressed/piggy_data
>>> SHIPPED arch/arm/boot/compressed/lib1funcs.S
>>> SHIPPED arch/arm/boot/compressed/ashldi3.S
>>> SHIPPED arch/arm/boot/compressed/bswapsdi2.S
>>> AS arch/arm/boot/compressed/lib1funcs.o
>>> AS arch/arm/boot/compressed/ashldi3.o
>>> AS arch/arm/boot/compressed/bswapsdi2.o
>>> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
>>> ERROR: "_test_and_set_bit" [sound/core/seq/snd-seq.ko] undefined!
>>> ERROR: "_set_bit" [net/bridge/bridge.ko] undefined!
>>> ERROR: "_clear_bit" [net/bridge/bridge.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
>>> ERROR: "_set_bit" [net/bluetooth/hidp/hidp.ko] undefined!
>>> ERROR: "_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
>>> ERROR: "_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
>>> ERROR: "_test_and_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
>>> ERROR: "_clear_bit" [net/bluetooth/bnep/bnep.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [fs/fuse/fuse.ko] undefined!
>>> ERROR: "_set_bit" [fs/fuse/fuse.ko] undefined!
>>> ERROR: "_test_and_set_bit" [fs/fuse/fuse.ko] undefined!
>>> ERROR: "_clear_bit" [fs/fuse/fuse.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [fs/cifs/cifs.ko] undefined!
>>> ERROR: "_set_bit" [fs/cifs/cifs.ko] undefined!
>>> ERROR: "_test_and_set_bit" [fs/cifs/cifs.ko] undefined!
>>> ERROR: "_clear_bit" [fs/cifs/cifs.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [fs/btrfs/btrfs.ko] undefined!
>>> ERROR: "_set_bit" [fs/btrfs/btrfs.ko] undefined!
>>> ERROR: "_test_and_set_bit" [fs/btrfs/btrfs.ko] undefined!
>>> ERROR: "_clear_bit" [fs/btrfs/btrfs.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
>>> ERROR: "_set_bit" [drivers/usb/storage/usb-storage.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
>>> ERROR: "_set_bit" [drivers/usb/gadget/libcomposite.ko] undefined!
>>> ERROR: "_set_bit" [drivers/usb/gadget/function/usb_f_rndis.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
>>> ERROR: "_test_and_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
>>> ERROR: "_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
>>> ERROR: "_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
>>> ERROR: "_test_and_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/md/dm-crypt.ko] undefined!
>>> ERROR: "_set_bit" [drivers/md/dm-crypt.ko] undefined!
>>> ERROR: "_set_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
>>> ERROR: "_test_and_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
>>> ERROR: "_test_and_set_bit" [drivers/bluetooth/btusb.ko] undefined!
>>> ERROR: "_set_bit" [drivers/bluetooth/btusb.ko] undefined!
>>> ERROR: "_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
>>> ERROR: "_set_bit" [drivers/bluetooth/btintel.ko] undefined!
>>> ERROR: "_set_bit" [drivers/bluetooth/btbcm.ko] undefined!
>>> scripts/Makefile.modpost:91: recipe for target '__modpost' failed
>>> make[1]: *** [__modpost] Error 1
>>> Makefile:1191: recipe for target 'modules' failed
>>> make: *** [modules] Error 2
>>
>>
>> This is the config I'm using for the build:
>> https://github.com/tobiasjakobi/odroid-environment/blob/master/sourcecode/system/vanilla-4.9-debug.conf
>
> You have CONFIG_TRIM_UNUSED_KSYMS enabled - I wonder if that's the
> issue. I've just enabled that here, and building I see:
Thanks, I had this enabled on purpose since I don't need any out-of-tree
drivers for this board.
I'll check if disabling TRIM_UNUSED_KSYMS also does the trick for me.
With best wishes,
Tobias
> EXPORTS lib/lib-ksyms.o
> LD lib/built-in.o
> CHK include/generated/autoksyms.h
> KSYMS symbols: before=0, after=2413, changed=2413
> UPD include/generated/autoksyms.h
>
> and then the build seems to restart from the very beginning, which seems
> rather fishy - it doubles the build time of the kernel. The second
> build doesn't even hit any ccache entries from the first build. Then we
> get through the rebuild, and I get:
>
> EXPORTS lib/lib-ksyms.o
> LD lib/built-in.o
> CHK include/generated/autoksyms.h
> LD vmlinux.o
> ...
> LD vmlinux
> SORTEX vmlinux
> SYSMAP System.map
> Building modules, stage 2.
> OBJCOPY arch/arm/boot/Image
> Kernel: arch/arm/boot/Image is ready
> AS arch/arm/boot/compressed/head.o
> LZO arch/arm/boot/compressed/piggy_data
> MODPOST 465 modules
> ERROR: CC arch/arm/boot/compressed/misc.o
> "_clear_bit" [net/sched/sch_teql.ko] undefined!
> ERROR: "_set_bit" [net/sched/sch_teql.ko] undefined!
> ERROR: "_set_bit" [net/sched/cls_u32.ko] undefined!
> ERROR: "_test_and_set_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
> ERROR: "_clear_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
> ERROR: "_test_and_clear_bit" [net/mac80211/mac80211.ko] undefined!
> ERROR: "_set_bit" [net/mac80211/mac80211.ko] undefined!
> ERROR: "_test_and_set_bit" [net/mac80211/mac80211.ko] undefined!
> ERROR: "_clear_bit" [net/mac80211/mac80211.ko] undefined!
>
> So yes, it's caused by this ksyms trimming.
>
> Now, the thing is that include/generated/autoksyms.h contains:
>
> #define __KSYM__change_bit 1
> #define __KSYM__clear_bit 1
> #define __KSYM__set_bit 1
> #define __KSYM__test_and_change_bit 1
> #define __KSYM__test_and_clear_bit 1
> #define __KSYM__test_and_set_bit 1
>
> amongst many other stuff - presumably this is a list of ksyms which
> should be included, rather than a list of what should be excluded.
>
> I'm afraid that I never saw the patches which changed the way the ksyms
> stuff worked for the assembly files, and these patches have caused
> several problems for ARM. I'm not aware of what the changes were, or
> how the damn exports now work, so I'm currently at a loss what to
> suggest at the moment, other than to disable CONFIG_TRIM_UNUSED_KSYMS in
> your configuration until someone can work out wtf is going on.
>
> I guess I'm going to have to work out how this stuff now works - don't
> expect a solution quickly, especially as building with this option
> enabled is soo time consuming (like, half an hour per build.)
>
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
2016-11-20 12:34 ` Russell King - ARM Linux
(?)
@ 2016-11-20 13:02 ` Corentin Labbe
-1 siblings, 0 replies; 29+ messages in thread
From: Corentin Labbe @ 2016-11-20 13:02 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: Tobias Jakobi, linux-samsung-soc, viro, linux-arm-kernel, linux-kernel
On Sun, Nov 20, 2016 at 12:34:22PM +0000, Russell King - ARM Linux wrote:
> On Sun, Nov 20, 2016 at 12:43:38PM +0100, Tobias Jakobi wrote:
> > Hello Russell,
> >
> > Russell King - ARM Linux wrote:
> > > None of the autobuilders are finding this problem, and they build a
> > > wide range of configurations. Maybe it's something specific to how
> > > you're building the kernel - can you give step by step instructions
> > > how to reproduce this please?
> > Just using plain make here, no cross-compiler or anything involved. gcc
> > is version 4.9.4.
>
> Hmm. The commit you mention was merged during the merge window, so
> anyone building 4.9-rc1 or later should be seeing this problem, but
> they aren't. I've built many kernels post -rc1, and I'm not seeing
> the problem with my 4.7.4 cross compiler.
>
I have the same issue here on all my Allwinner ARM device.
I have not reported this issue since I believed to see some report of it.
I cross compile with armv7a-hardfloat-linux-gnueabi-4.9.3.
With CONFIG_UNUSED_SYMBOLS set, the issue disapear
Regards
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 13:02 ` Corentin Labbe
0 siblings, 0 replies; 29+ messages in thread
From: Corentin Labbe @ 2016-11-20 13:02 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: Tobias Jakobi, linux-samsung-soc, viro, linux-arm-kernel, linux-kernel
On Sun, Nov 20, 2016 at 12:34:22PM +0000, Russell King - ARM Linux wrote:
> On Sun, Nov 20, 2016 at 12:43:38PM +0100, Tobias Jakobi wrote:
> > Hello Russell,
> >
> > Russell King - ARM Linux wrote:
> > > None of the autobuilders are finding this problem, and they build a
> > > wide range of configurations. Maybe it's something specific to how
> > > you're building the kernel - can you give step by step instructions
> > > how to reproduce this please?
> > Just using plain make here, no cross-compiler or anything involved. gcc
> > is version 4.9.4.
>
> Hmm. The commit you mention was merged during the merge window, so
> anyone building 4.9-rc1 or later should be seeing this problem, but
> they aren't. I've built many kernels post -rc1, and I'm not seeing
> the problem with my 4.7.4 cross compiler.
>
I have the same issue here on all my Allwinner ARM device.
I have not reported this issue since I believed to see some report of it.
I cross compile with armv7a-hardfloat-linux-gnueabi-4.9.3.
With CONFIG_UNUSED_SYMBOLS set, the issue disapear
Regards
^ permalink raw reply [flat|nested] 29+ messages in thread
* commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 13:02 ` Corentin Labbe
0 siblings, 0 replies; 29+ messages in thread
From: Corentin Labbe @ 2016-11-20 13:02 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Nov 20, 2016 at 12:34:22PM +0000, Russell King - ARM Linux wrote:
> On Sun, Nov 20, 2016 at 12:43:38PM +0100, Tobias Jakobi wrote:
> > Hello Russell,
> >
> > Russell King - ARM Linux wrote:
> > > None of the autobuilders are finding this problem, and they build a
> > > wide range of configurations. Maybe it's something specific to how
> > > you're building the kernel - can you give step by step instructions
> > > how to reproduce this please?
> > Just using plain make here, no cross-compiler or anything involved. gcc
> > is version 4.9.4.
>
> Hmm. The commit you mention was merged during the merge window, so
> anyone building 4.9-rc1 or later should be seeing this problem, but
> they aren't. I've built many kernels post -rc1, and I'm not seeing
> the problem with my 4.7.4 cross compiler.
>
I have the same issue here on all my Allwinner ARM device.
I have not reported this issue since I believed to see some report of it.
I cross compile with armv7a-hardfloat-linux-gnueabi-4.9.3.
With CONFIG_UNUSED_SYMBOLS set, the issue disapear
Regards
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
2016-11-20 12:56 ` Tobias Jakobi
(?)
@ 2016-11-20 13:25 ` Russell King - ARM Linux
-1 siblings, 0 replies; 29+ messages in thread
From: Russell King - ARM Linux @ 2016-11-20 13:25 UTC (permalink / raw)
To: Tobias Jakobi
Cc: linux-samsung-soc, viro, linux-arm-kernel, linux-kernel, nicolas.pitre
On Sun, Nov 20, 2016 at 01:56:16PM +0100, Tobias Jakobi wrote:
> Hey Russell,
>
> thanks for the quick reply and looking into this!
>
> Added Nicolas Pitre to Cc since the ksym trim stuff came from him.
Arnd's patch "kbuild: provide include/asm/asm-prototypes.h for ARM" fixes
it, but I think it's a mixture of fixes, and partially dependent on some
other patches. I don't know what the status of his patch is, but my
feeling is that it consists of more than a single fix, and needs
splitting. Certainly the asm-prototypes.h is not relevant to this
problem, but the rest of it seems to be.
> Russell King - ARM Linux wrote:
> > On Sun, Nov 20, 2016 at 12:43:38PM +0100, Tobias Jakobi wrote:
> >> Hello Russell,
> >>
> >> Russell King - ARM Linux wrote:
> >>> None of the autobuilders are finding this problem, and they build a
> >>> wide range of configurations. Maybe it's something specific to how
> >>> you're building the kernel - can you give step by step instructions
> >>> how to reproduce this please?
> >> Just using plain make here, no cross-compiler or anything involved. gcc
> >> is version 4.9.4.
> >
> > Hmm. The commit you mention was merged during the merge window, so
> > anyone building 4.9-rc1 or later should be seeing this problem, but
> > they aren't. I've built many kernels post -rc1, and I'm not seeing
> > the problem with my 4.7.4 cross compiler.
> >
> >> Build platform is a Exynos4412 based ODROID-X2.
> >>
> >>
> >> The complete log from the 'build modules' step:
> >>> Building modules, stage 2.
> >>> Kernel: arch/arm/boot/Image is ready
> >>> MODPOST 52 modules
> >>> XZKERN arch/arm/boot/compressed/piggy_data
> >>> SHIPPED arch/arm/boot/compressed/lib1funcs.S
> >>> SHIPPED arch/arm/boot/compressed/ashldi3.S
> >>> SHIPPED arch/arm/boot/compressed/bswapsdi2.S
> >>> AS arch/arm/boot/compressed/lib1funcs.o
> >>> AS arch/arm/boot/compressed/ashldi3.o
> >>> AS arch/arm/boot/compressed/bswapsdi2.o
> >>> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> >>> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> >>> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> >>> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [sound/core/seq/snd-seq.ko] undefined!
> >>> ERROR: "_set_bit" [net/bridge/bridge.ko] undefined!
> >>> ERROR: "_clear_bit" [net/bridge/bridge.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> >>> ERROR: "_set_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> >>> ERROR: "_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> >>> ERROR: "_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> >>> ERROR: "_clear_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [fs/fuse/fuse.ko] undefined!
> >>> ERROR: "_set_bit" [fs/fuse/fuse.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [fs/fuse/fuse.ko] undefined!
> >>> ERROR: "_clear_bit" [fs/fuse/fuse.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [fs/cifs/cifs.ko] undefined!
> >>> ERROR: "_set_bit" [fs/cifs/cifs.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [fs/cifs/cifs.ko] undefined!
> >>> ERROR: "_clear_bit" [fs/cifs/cifs.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> >>> ERROR: "_set_bit" [fs/btrfs/btrfs.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [fs/btrfs/btrfs.ko] undefined!
> >>> ERROR: "_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/usb/gadget/libcomposite.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/usb/gadget/function/usb_f_rndis.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/md/dm-crypt.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/md/dm-crypt.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/bluetooth/btintel.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/bluetooth/btbcm.ko] undefined!
> >>> scripts/Makefile.modpost:91: recipe for target '__modpost' failed
> >>> make[1]: *** [__modpost] Error 1
> >>> Makefile:1191: recipe for target 'modules' failed
> >>> make: *** [modules] Error 2
> >>
> >>
> >> This is the config I'm using for the build:
> >> https://github.com/tobiasjakobi/odroid-environment/blob/master/sourcecode/system/vanilla-4.9-debug.conf
> >
> > You have CONFIG_TRIM_UNUSED_KSYMS enabled - I wonder if that's the
> > issue. I've just enabled that here, and building I see:
> Thanks, I had this enabled on purpose since I don't need any out-of-tree
> drivers for this board.
>
> I'll check if disabling TRIM_UNUSED_KSYMS also does the trick for me.
>
>
> With best wishes,
> Tobias
>
>
> > EXPORTS lib/lib-ksyms.o
> > LD lib/built-in.o
> > CHK include/generated/autoksyms.h
> > KSYMS symbols: before=0, after=2413, changed=2413
> > UPD include/generated/autoksyms.h
> >
> > and then the build seems to restart from the very beginning, which seems
> > rather fishy - it doubles the build time of the kernel. The second
> > build doesn't even hit any ccache entries from the first build. Then we
> > get through the rebuild, and I get:
> >
> > EXPORTS lib/lib-ksyms.o
> > LD lib/built-in.o
> > CHK include/generated/autoksyms.h
> > LD vmlinux.o
> > ...
> > LD vmlinux
> > SORTEX vmlinux
> > SYSMAP System.map
> > Building modules, stage 2.
> > OBJCOPY arch/arm/boot/Image
> > Kernel: arch/arm/boot/Image is ready
> > AS arch/arm/boot/compressed/head.o
> > LZO arch/arm/boot/compressed/piggy_data
> > MODPOST 465 modules
> > ERROR: CC arch/arm/boot/compressed/misc.o
> > "_clear_bit" [net/sched/sch_teql.ko] undefined!
> > ERROR: "_set_bit" [net/sched/sch_teql.ko] undefined!
> > ERROR: "_set_bit" [net/sched/cls_u32.ko] undefined!
> > ERROR: "_test_and_set_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
> > ERROR: "_clear_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
> > ERROR: "_test_and_clear_bit" [net/mac80211/mac80211.ko] undefined!
> > ERROR: "_set_bit" [net/mac80211/mac80211.ko] undefined!
> > ERROR: "_test_and_set_bit" [net/mac80211/mac80211.ko] undefined!
> > ERROR: "_clear_bit" [net/mac80211/mac80211.ko] undefined!
> >
> > So yes, it's caused by this ksyms trimming.
> >
> > Now, the thing is that include/generated/autoksyms.h contains:
> >
> > #define __KSYM__change_bit 1
> > #define __KSYM__clear_bit 1
> > #define __KSYM__set_bit 1
> > #define __KSYM__test_and_change_bit 1
> > #define __KSYM__test_and_clear_bit 1
> > #define __KSYM__test_and_set_bit 1
> >
> > amongst many other stuff - presumably this is a list of ksyms which
> > should be included, rather than a list of what should be excluded.
> >
> > I'm afraid that I never saw the patches which changed the way the ksyms
> > stuff worked for the assembly files, and these patches have caused
> > several problems for ARM. I'm not aware of what the changes were, or
> > how the damn exports now work, so I'm currently at a loss what to
> > suggest at the moment, other than to disable CONFIG_TRIM_UNUSED_KSYMS in
> > your configuration until someone can work out wtf is going on.
> >
> > I guess I'm going to have to work out how this stuff now works - don't
> > expect a solution quickly, especially as building with this option
> > enabled is soo time consuming (like, half an hour per build.)
> >
>
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 13:25 ` Russell King - ARM Linux
0 siblings, 0 replies; 29+ messages in thread
From: Russell King - ARM Linux @ 2016-11-20 13:25 UTC (permalink / raw)
To: Tobias Jakobi
Cc: linux-samsung-soc, viro, linux-arm-kernel, linux-kernel, nicolas.pitre
On Sun, Nov 20, 2016 at 01:56:16PM +0100, Tobias Jakobi wrote:
> Hey Russell,
>
> thanks for the quick reply and looking into this!
>
> Added Nicolas Pitre to Cc since the ksym trim stuff came from him.
Arnd's patch "kbuild: provide include/asm/asm-prototypes.h for ARM" fixes
it, but I think it's a mixture of fixes, and partially dependent on some
other patches. I don't know what the status of his patch is, but my
feeling is that it consists of more than a single fix, and needs
splitting. Certainly the asm-prototypes.h is not relevant to this
problem, but the rest of it seems to be.
> Russell King - ARM Linux wrote:
> > On Sun, Nov 20, 2016 at 12:43:38PM +0100, Tobias Jakobi wrote:
> >> Hello Russell,
> >>
> >> Russell King - ARM Linux wrote:
> >>> None of the autobuilders are finding this problem, and they build a
> >>> wide range of configurations. Maybe it's something specific to how
> >>> you're building the kernel - can you give step by step instructions
> >>> how to reproduce this please?
> >> Just using plain make here, no cross-compiler or anything involved. gcc
> >> is version 4.9.4.
> >
> > Hmm. The commit you mention was merged during the merge window, so
> > anyone building 4.9-rc1 or later should be seeing this problem, but
> > they aren't. I've built many kernels post -rc1, and I'm not seeing
> > the problem with my 4.7.4 cross compiler.
> >
> >> Build platform is a Exynos4412 based ODROID-X2.
> >>
> >>
> >> The complete log from the 'build modules' step:
> >>> Building modules, stage 2.
> >>> Kernel: arch/arm/boot/Image is ready
> >>> MODPOST 52 modules
> >>> XZKERN arch/arm/boot/compressed/piggy_data
> >>> SHIPPED arch/arm/boot/compressed/lib1funcs.S
> >>> SHIPPED arch/arm/boot/compressed/ashldi3.S
> >>> SHIPPED arch/arm/boot/compressed/bswapsdi2.S
> >>> AS arch/arm/boot/compressed/lib1funcs.o
> >>> AS arch/arm/boot/compressed/ashldi3.o
> >>> AS arch/arm/boot/compressed/bswapsdi2.o
> >>> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> >>> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> >>> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> >>> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [sound/core/seq/snd-seq.ko] undefined!
> >>> ERROR: "_set_bit" [net/bridge/bridge.ko] undefined!
> >>> ERROR: "_clear_bit" [net/bridge/bridge.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> >>> ERROR: "_set_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> >>> ERROR: "_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> >>> ERROR: "_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> >>> ERROR: "_clear_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [fs/fuse/fuse.ko] undefined!
> >>> ERROR: "_set_bit" [fs/fuse/fuse.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [fs/fuse/fuse.ko] undefined!
> >>> ERROR: "_clear_bit" [fs/fuse/fuse.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [fs/cifs/cifs.ko] undefined!
> >>> ERROR: "_set_bit" [fs/cifs/cifs.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [fs/cifs/cifs.ko] undefined!
> >>> ERROR: "_clear_bit" [fs/cifs/cifs.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> >>> ERROR: "_set_bit" [fs/btrfs/btrfs.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [fs/btrfs/btrfs.ko] undefined!
> >>> ERROR: "_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/usb/gadget/libcomposite.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/usb/gadget/function/usb_f_rndis.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/md/dm-crypt.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/md/dm-crypt.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/bluetooth/btintel.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/bluetooth/btbcm.ko] undefined!
> >>> scripts/Makefile.modpost:91: recipe for target '__modpost' failed
> >>> make[1]: *** [__modpost] Error 1
> >>> Makefile:1191: recipe for target 'modules' failed
> >>> make: *** [modules] Error 2
> >>
> >>
> >> This is the config I'm using for the build:
> >> https://github.com/tobiasjakobi/odroid-environment/blob/master/sourcecode/system/vanilla-4.9-debug.conf
> >
> > You have CONFIG_TRIM_UNUSED_KSYMS enabled - I wonder if that's the
> > issue. I've just enabled that here, and building I see:
> Thanks, I had this enabled on purpose since I don't need any out-of-tree
> drivers for this board.
>
> I'll check if disabling TRIM_UNUSED_KSYMS also does the trick for me.
>
>
> With best wishes,
> Tobias
>
>
> > EXPORTS lib/lib-ksyms.o
> > LD lib/built-in.o
> > CHK include/generated/autoksyms.h
> > KSYMS symbols: before=0, after=2413, changed=2413
> > UPD include/generated/autoksyms.h
> >
> > and then the build seems to restart from the very beginning, which seems
> > rather fishy - it doubles the build time of the kernel. The second
> > build doesn't even hit any ccache entries from the first build. Then we
> > get through the rebuild, and I get:
> >
> > EXPORTS lib/lib-ksyms.o
> > LD lib/built-in.o
> > CHK include/generated/autoksyms.h
> > LD vmlinux.o
> > ...
> > LD vmlinux
> > SORTEX vmlinux
> > SYSMAP System.map
> > Building modules, stage 2.
> > OBJCOPY arch/arm/boot/Image
> > Kernel: arch/arm/boot/Image is ready
> > AS arch/arm/boot/compressed/head.o
> > LZO arch/arm/boot/compressed/piggy_data
> > MODPOST 465 modules
> > ERROR: CC arch/arm/boot/compressed/misc.o
> > "_clear_bit" [net/sched/sch_teql.ko] undefined!
> > ERROR: "_set_bit" [net/sched/sch_teql.ko] undefined!
> > ERROR: "_set_bit" [net/sched/cls_u32.ko] undefined!
> > ERROR: "_test_and_set_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
> > ERROR: "_clear_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
> > ERROR: "_test_and_clear_bit" [net/mac80211/mac80211.ko] undefined!
> > ERROR: "_set_bit" [net/mac80211/mac80211.ko] undefined!
> > ERROR: "_test_and_set_bit" [net/mac80211/mac80211.ko] undefined!
> > ERROR: "_clear_bit" [net/mac80211/mac80211.ko] undefined!
> >
> > So yes, it's caused by this ksyms trimming.
> >
> > Now, the thing is that include/generated/autoksyms.h contains:
> >
> > #define __KSYM__change_bit 1
> > #define __KSYM__clear_bit 1
> > #define __KSYM__set_bit 1
> > #define __KSYM__test_and_change_bit 1
> > #define __KSYM__test_and_clear_bit 1
> > #define __KSYM__test_and_set_bit 1
> >
> > amongst many other stuff - presumably this is a list of ksyms which
> > should be included, rather than a list of what should be excluded.
> >
> > I'm afraid that I never saw the patches which changed the way the ksyms
> > stuff worked for the assembly files, and these patches have caused
> > several problems for ARM. I'm not aware of what the changes were, or
> > how the damn exports now work, so I'm currently at a loss what to
> > suggest at the moment, other than to disable CONFIG_TRIM_UNUSED_KSYMS in
> > your configuration until someone can work out wtf is going on.
> >
> > I guess I'm going to have to work out how this stuff now works - don't
> > expect a solution quickly, especially as building with this option
> > enabled is soo time consuming (like, half an hour per build.)
> >
>
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 29+ messages in thread
* commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 13:25 ` Russell King - ARM Linux
0 siblings, 0 replies; 29+ messages in thread
From: Russell King - ARM Linux @ 2016-11-20 13:25 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Nov 20, 2016 at 01:56:16PM +0100, Tobias Jakobi wrote:
> Hey Russell,
>
> thanks for the quick reply and looking into this!
>
> Added Nicolas Pitre to Cc since the ksym trim stuff came from him.
Arnd's patch "kbuild: provide include/asm/asm-prototypes.h for ARM" fixes
it, but I think it's a mixture of fixes, and partially dependent on some
other patches. I don't know what the status of his patch is, but my
feeling is that it consists of more than a single fix, and needs
splitting. Certainly the asm-prototypes.h is not relevant to this
problem, but the rest of it seems to be.
> Russell King - ARM Linux wrote:
> > On Sun, Nov 20, 2016 at 12:43:38PM +0100, Tobias Jakobi wrote:
> >> Hello Russell,
> >>
> >> Russell King - ARM Linux wrote:
> >>> None of the autobuilders are finding this problem, and they build a
> >>> wide range of configurations. Maybe it's something specific to how
> >>> you're building the kernel - can you give step by step instructions
> >>> how to reproduce this please?
> >> Just using plain make here, no cross-compiler or anything involved. gcc
> >> is version 4.9.4.
> >
> > Hmm. The commit you mention was merged during the merge window, so
> > anyone building 4.9-rc1 or later should be seeing this problem, but
> > they aren't. I've built many kernels post -rc1, and I'm not seeing
> > the problem with my 4.7.4 cross compiler.
> >
> >> Build platform is a Exynos4412 based ODROID-X2.
> >>
> >>
> >> The complete log from the 'build modules' step:
> >>> Building modules, stage 2.
> >>> Kernel: arch/arm/boot/Image is ready
> >>> MODPOST 52 modules
> >>> XZKERN arch/arm/boot/compressed/piggy_data
> >>> SHIPPED arch/arm/boot/compressed/lib1funcs.S
> >>> SHIPPED arch/arm/boot/compressed/ashldi3.S
> >>> SHIPPED arch/arm/boot/compressed/bswapsdi2.S
> >>> AS arch/arm/boot/compressed/lib1funcs.o
> >>> AS arch/arm/boot/compressed/ashldi3.o
> >>> AS arch/arm/boot/compressed/bswapsdi2.o
> >>> ERROR: "_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> >>> ERROR: "_clear_bit" [sound/usb/snd-usbmidi-lib.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> >>> ERROR: "_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [sound/usb/snd-usb-audio.ko] undefined!
> >>> ERROR: "_clear_bit" [sound/usb/snd-usb-audio.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [sound/core/seq/snd-seq.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [sound/core/seq/snd-seq.ko] undefined!
> >>> ERROR: "_set_bit" [net/bridge/bridge.ko] undefined!
> >>> ERROR: "_clear_bit" [net/bridge/bridge.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> >>> ERROR: "_set_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> >>> ERROR: "_clear_bit" [net/bluetooth/hidp/hidp.ko] undefined!
> >>> ERROR: "_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> >>> ERROR: "_clear_bit" [net/bluetooth/bnep/bnep.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [fs/fuse/fuse.ko] undefined!
> >>> ERROR: "_set_bit" [fs/fuse/fuse.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [fs/fuse/fuse.ko] undefined!
> >>> ERROR: "_clear_bit" [fs/fuse/fuse.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [fs/cifs/cifs.ko] undefined!
> >>> ERROR: "_set_bit" [fs/cifs/cifs.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [fs/cifs/cifs.ko] undefined!
> >>> ERROR: "_clear_bit" [fs/cifs/cifs.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> >>> ERROR: "_set_bit" [fs/btrfs/btrfs.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [fs/btrfs/btrfs.ko] undefined!
> >>> ERROR: "_clear_bit" [fs/btrfs/btrfs.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/usb/storage/usb-storage.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/usb/gadget/libcomposite.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/usb/gadget/function/usb_f_rndis.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/usb/gadget/function/u_ether.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/media/platform/s5p-mfc/s5p-mfc.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/md/dm-crypt.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/md/dm-crypt.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/gpu/arm/mali/maligpu.ko] undefined!
> >>> ERROR: "_test_and_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> >>> ERROR: "_test_and_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/bluetooth/btusb.ko] undefined!
> >>> ERROR: "_clear_bit" [drivers/bluetooth/btusb.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/bluetooth/btintel.ko] undefined!
> >>> ERROR: "_set_bit" [drivers/bluetooth/btbcm.ko] undefined!
> >>> scripts/Makefile.modpost:91: recipe for target '__modpost' failed
> >>> make[1]: *** [__modpost] Error 1
> >>> Makefile:1191: recipe for target 'modules' failed
> >>> make: *** [modules] Error 2
> >>
> >>
> >> This is the config I'm using for the build:
> >> https://github.com/tobiasjakobi/odroid-environment/blob/master/sourcecode/system/vanilla-4.9-debug.conf
> >
> > You have CONFIG_TRIM_UNUSED_KSYMS enabled - I wonder if that's the
> > issue. I've just enabled that here, and building I see:
> Thanks, I had this enabled on purpose since I don't need any out-of-tree
> drivers for this board.
>
> I'll check if disabling TRIM_UNUSED_KSYMS also does the trick for me.
>
>
> With best wishes,
> Tobias
>
>
> > EXPORTS lib/lib-ksyms.o
> > LD lib/built-in.o
> > CHK include/generated/autoksyms.h
> > KSYMS symbols: before=0, after=2413, changed=2413
> > UPD include/generated/autoksyms.h
> >
> > and then the build seems to restart from the very beginning, which seems
> > rather fishy - it doubles the build time of the kernel. The second
> > build doesn't even hit any ccache entries from the first build. Then we
> > get through the rebuild, and I get:
> >
> > EXPORTS lib/lib-ksyms.o
> > LD lib/built-in.o
> > CHK include/generated/autoksyms.h
> > LD vmlinux.o
> > ...
> > LD vmlinux
> > SORTEX vmlinux
> > SYSMAP System.map
> > Building modules, stage 2.
> > OBJCOPY arch/arm/boot/Image
> > Kernel: arch/arm/boot/Image is ready
> > AS arch/arm/boot/compressed/head.o
> > LZO arch/arm/boot/compressed/piggy_data
> > MODPOST 465 modules
> > ERROR: CC arch/arm/boot/compressed/misc.o
> > "_clear_bit" [net/sched/sch_teql.ko] undefined!
> > ERROR: "_set_bit" [net/sched/sch_teql.ko] undefined!
> > ERROR: "_set_bit" [net/sched/cls_u32.ko] undefined!
> > ERROR: "_test_and_set_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
> > ERROR: "_clear_bit" [net/netfilter/nfnetlink_acct.ko] undefined!
> > ERROR: "_test_and_clear_bit" [net/mac80211/mac80211.ko] undefined!
> > ERROR: "_set_bit" [net/mac80211/mac80211.ko] undefined!
> > ERROR: "_test_and_set_bit" [net/mac80211/mac80211.ko] undefined!
> > ERROR: "_clear_bit" [net/mac80211/mac80211.ko] undefined!
> >
> > So yes, it's caused by this ksyms trimming.
> >
> > Now, the thing is that include/generated/autoksyms.h contains:
> >
> > #define __KSYM__change_bit 1
> > #define __KSYM__clear_bit 1
> > #define __KSYM__set_bit 1
> > #define __KSYM__test_and_change_bit 1
> > #define __KSYM__test_and_clear_bit 1
> > #define __KSYM__test_and_set_bit 1
> >
> > amongst many other stuff - presumably this is a list of ksyms which
> > should be included, rather than a list of what should be excluded.
> >
> > I'm afraid that I never saw the patches which changed the way the ksyms
> > stuff worked for the assembly files, and these patches have caused
> > several problems for ARM. I'm not aware of what the changes were, or
> > how the damn exports now work, so I'm currently at a loss what to
> > suggest at the moment, other than to disable CONFIG_TRIM_UNUSED_KSYMS in
> > your configuration until someone can work out wtf is going on.
> >
> > I guess I'm going to have to work out how this stuff now works - don't
> > expect a solution quickly, especially as building with this option
> > enabled is soo time consuming (like, half an hour per build.)
> >
>
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
2016-11-20 13:25 ` Russell King - ARM Linux
(?)
@ 2016-11-20 17:03 ` Nicolas Pitre
-1 siblings, 0 replies; 29+ messages in thread
From: Nicolas Pitre @ 2016-11-20 17:03 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: Tobias Jakobi, linux-samsung-soc, viro, linux-arm-kernel, linux-kernel
On Sun, 20 Nov 2016, Russell King - ARM Linux wrote:
> On Sun, Nov 20, 2016 at 01:56:16PM +0100, Tobias Jakobi wrote:
> > Hey Russell,
> >
> > thanks for the quick reply and looking into this!
> >
> > Added Nicolas Pitre to Cc since the ksym trim stuff came from him.
>
> Arnd's patch "kbuild: provide include/asm/asm-prototypes.h for ARM" fixes
> it, but I think it's a mixture of fixes, and partially dependent on some
> other patches. I don't know what the status of his patch is, but my
> feeling is that it consists of more than a single fix, and needs
> splitting. Certainly the asm-prototypes.h is not relevant to this
> problem, but the rest of it seems to be.
Well... the problem for the current breakage was identified a while ago:
https://lkml.org/lkml/2016/2/10/686
I'm surprised that Al didn't fold my patch into his. Now that this has
hit mainline, CONFIG_TRIM_UNUSED_KSYMS is now broken on ARM.
And I don't see how the asm-prototypes.h is going to fix it either (if
anything, at the moment it looks like it might be another source of
breakage).
So I think the folowing patch should go into mainline:
----- >8
>From 3225f625c116a350c54f361df491bf3e1c6d32b3 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nicolas.pitre@linaro.org>
Date: Wed, 10 Feb 2016 17:40:04 -0500
Subject: [PATCH] ARM: don't use assembler macro arguments with EXPORT_SYMBOL()
Committ 4dd1837d75 ("arm: move exports to definitions") added
EXPORT_SYMBOL(\name) to bitops.h. Here \name is an assembler macro
argument which is not subject to preprocessor substitutions. And the
assembler doesn't handle preprocessor macros either. That has the effect
of breaking CONFIG_TRIM_UNUSED_KSYMS=y.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index df06638b32..7d807cfd8e 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -1,6 +1,5 @@
#include <asm/assembler.h>
#include <asm/unwind.h>
-#include <asm/export.h>
#if __LINUX_ARM_ARCH__ >= 6
.macro bitop, name, instr
@@ -26,7 +25,6 @@ UNWIND( .fnstart )
bx lr
UNWIND( .fnend )
ENDPROC(\name )
-EXPORT_SYMBOL(\name )
.endm
.macro testop, name, instr, store
@@ -57,7 +55,6 @@ UNWIND( .fnstart )
2: bx lr
UNWIND( .fnend )
ENDPROC(\name )
-EXPORT_SYMBOL(\name )
.endm
#else
.macro bitop, name, instr
@@ -77,7 +74,6 @@ UNWIND( .fnstart )
ret lr
UNWIND( .fnend )
ENDPROC(\name )
-EXPORT_SYMBOL(\name )
.endm
/**
@@ -106,6 +102,5 @@ UNWIND( .fnstart )
ret lr
UNWIND( .fnend )
ENDPROC(\name )
-EXPORT_SYMBOL(\name )
.endm
#endif
diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
index f402786217..1cfdb138d2 100644
--- a/arch/arm/lib/changebit.S
+++ b/arch/arm/lib/changebit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
bitop _change_bit, eor
+
+EXPORT_SYMBOL(_change_bit)
diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
index f6b75fb64d..e901ca5af0 100644
--- a/arch/arm/lib/clearbit.S
+++ b/arch/arm/lib/clearbit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
bitop _clear_bit, bic
+
+EXPORT_SYMBOL(_clear_bit)
diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
index 618fedae4b..3c8b11240f 100644
--- a/arch/arm/lib/setbit.S
+++ b/arch/arm/lib/setbit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
bitop _set_bit, orr
+
+EXPORT_SYMBOL(_set_bit)
diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
index 4becdc3a59..e3d19b87fb 100644
--- a/arch/arm/lib/testchangebit.S
+++ b/arch/arm/lib/testchangebit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
testop _test_and_change_bit, eor, str
+
+EXPORT_SYMBOL(_test_and_change_bit)
diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
index 918841dcce..d247e6f70f 100644
--- a/arch/arm/lib/testclearbit.S
+++ b/arch/arm/lib/testclearbit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
testop _test_and_clear_bit, bicne, strne
+
+EXPORT_SYMBOL(_test_and_clear_bit)
diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
index 8d1b2fe9e4..76800ff601 100644
--- a/arch/arm/lib/testsetbit.S
+++ b/arch/arm/lib/testsetbit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
testop _test_and_set_bit, orreq, streq
+
+EXPORT_SYMBOL(_test_and_set_bit)
^ permalink raw reply related [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 17:03 ` Nicolas Pitre
0 siblings, 0 replies; 29+ messages in thread
From: Nicolas Pitre @ 2016-11-20 17:03 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: Tobias Jakobi, linux-samsung-soc, viro, linux-arm-kernel, linux-kernel
On Sun, 20 Nov 2016, Russell King - ARM Linux wrote:
> On Sun, Nov 20, 2016 at 01:56:16PM +0100, Tobias Jakobi wrote:
> > Hey Russell,
> >
> > thanks for the quick reply and looking into this!
> >
> > Added Nicolas Pitre to Cc since the ksym trim stuff came from him.
>
> Arnd's patch "kbuild: provide include/asm/asm-prototypes.h for ARM" fixes
> it, but I think it's a mixture of fixes, and partially dependent on some
> other patches. I don't know what the status of his patch is, but my
> feeling is that it consists of more than a single fix, and needs
> splitting. Certainly the asm-prototypes.h is not relevant to this
> problem, but the rest of it seems to be.
Well... the problem for the current breakage was identified a while ago:
https://lkml.org/lkml/2016/2/10/686
I'm surprised that Al didn't fold my patch into his. Now that this has
hit mainline, CONFIG_TRIM_UNUSED_KSYMS is now broken on ARM.
And I don't see how the asm-prototypes.h is going to fix it either (if
anything, at the moment it looks like it might be another source of
breakage).
So I think the folowing patch should go into mainline:
----- >8
>From 3225f625c116a350c54f361df491bf3e1c6d32b3 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nicolas.pitre@linaro.org>
Date: Wed, 10 Feb 2016 17:40:04 -0500
Subject: [PATCH] ARM: don't use assembler macro arguments with EXPORT_SYMBOL()
Committ 4dd1837d75 ("arm: move exports to definitions") added
EXPORT_SYMBOL(\name) to bitops.h. Here \name is an assembler macro
argument which is not subject to preprocessor substitutions. And the
assembler doesn't handle preprocessor macros either. That has the effect
of breaking CONFIG_TRIM_UNUSED_KSYMS=y.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index df06638b32..7d807cfd8e 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -1,6 +1,5 @@
#include <asm/assembler.h>
#include <asm/unwind.h>
-#include <asm/export.h>
#if __LINUX_ARM_ARCH__ >= 6
.macro bitop, name, instr
@@ -26,7 +25,6 @@ UNWIND( .fnstart )
bx lr
UNWIND( .fnend )
ENDPROC(\name )
-EXPORT_SYMBOL(\name )
.endm
.macro testop, name, instr, store
@@ -57,7 +55,6 @@ UNWIND( .fnstart )
2: bx lr
UNWIND( .fnend )
ENDPROC(\name )
-EXPORT_SYMBOL(\name )
.endm
#else
.macro bitop, name, instr
@@ -77,7 +74,6 @@ UNWIND( .fnstart )
ret lr
UNWIND( .fnend )
ENDPROC(\name )
-EXPORT_SYMBOL(\name )
.endm
/**
@@ -106,6 +102,5 @@ UNWIND( .fnstart )
ret lr
UNWIND( .fnend )
ENDPROC(\name )
-EXPORT_SYMBOL(\name )
.endm
#endif
diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
index f402786217..1cfdb138d2 100644
--- a/arch/arm/lib/changebit.S
+++ b/arch/arm/lib/changebit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
bitop _change_bit, eor
+
+EXPORT_SYMBOL(_change_bit)
diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
index f6b75fb64d..e901ca5af0 100644
--- a/arch/arm/lib/clearbit.S
+++ b/arch/arm/lib/clearbit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
bitop _clear_bit, bic
+
+EXPORT_SYMBOL(_clear_bit)
diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
index 618fedae4b..3c8b11240f 100644
--- a/arch/arm/lib/setbit.S
+++ b/arch/arm/lib/setbit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
bitop _set_bit, orr
+
+EXPORT_SYMBOL(_set_bit)
diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
index 4becdc3a59..e3d19b87fb 100644
--- a/arch/arm/lib/testchangebit.S
+++ b/arch/arm/lib/testchangebit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
testop _test_and_change_bit, eor, str
+
+EXPORT_SYMBOL(_test_and_change_bit)
diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
index 918841dcce..d247e6f70f 100644
--- a/arch/arm/lib/testclearbit.S
+++ b/arch/arm/lib/testclearbit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
testop _test_and_clear_bit, bicne, strne
+
+EXPORT_SYMBOL(_test_and_clear_bit)
diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
index 8d1b2fe9e4..76800ff601 100644
--- a/arch/arm/lib/testsetbit.S
+++ b/arch/arm/lib/testsetbit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
testop _test_and_set_bit, orreq, streq
+
+EXPORT_SYMBOL(_test_and_set_bit)
^ permalink raw reply related [flat|nested] 29+ messages in thread
* commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 17:03 ` Nicolas Pitre
0 siblings, 0 replies; 29+ messages in thread
From: Nicolas Pitre @ 2016-11-20 17:03 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, 20 Nov 2016, Russell King - ARM Linux wrote:
> On Sun, Nov 20, 2016 at 01:56:16PM +0100, Tobias Jakobi wrote:
> > Hey Russell,
> >
> > thanks for the quick reply and looking into this!
> >
> > Added Nicolas Pitre to Cc since the ksym trim stuff came from him.
>
> Arnd's patch "kbuild: provide include/asm/asm-prototypes.h for ARM" fixes
> it, but I think it's a mixture of fixes, and partially dependent on some
> other patches. I don't know what the status of his patch is, but my
> feeling is that it consists of more than a single fix, and needs
> splitting. Certainly the asm-prototypes.h is not relevant to this
> problem, but the rest of it seems to be.
Well... the problem for the current breakage was identified a while ago:
https://lkml.org/lkml/2016/2/10/686
I'm surprised that Al didn't fold my patch into his. Now that this has
hit mainline, CONFIG_TRIM_UNUSED_KSYMS is now broken on ARM.
And I don't see how the asm-prototypes.h is going to fix it either (if
anything, at the moment it looks like it might be another source of
breakage).
So I think the folowing patch should go into mainline:
----- >8
>From 3225f625c116a350c54f361df491bf3e1c6d32b3 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nicolas.pitre@linaro.org>
Date: Wed, 10 Feb 2016 17:40:04 -0500
Subject: [PATCH] ARM: don't use assembler macro arguments with EXPORT_SYMBOL()
Committ 4dd1837d75 ("arm: move exports to definitions") added
EXPORT_SYMBOL(\name) to bitops.h. Here \name is an assembler macro
argument which is not subject to preprocessor substitutions. And the
assembler doesn't handle preprocessor macros either. That has the effect
of breaking CONFIG_TRIM_UNUSED_KSYMS=y.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index df06638b32..7d807cfd8e 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -1,6 +1,5 @@
#include <asm/assembler.h>
#include <asm/unwind.h>
-#include <asm/export.h>
#if __LINUX_ARM_ARCH__ >= 6
.macro bitop, name, instr
@@ -26,7 +25,6 @@ UNWIND( .fnstart )
bx lr
UNWIND( .fnend )
ENDPROC(\name )
-EXPORT_SYMBOL(\name )
.endm
.macro testop, name, instr, store
@@ -57,7 +55,6 @@ UNWIND( .fnstart )
2: bx lr
UNWIND( .fnend )
ENDPROC(\name )
-EXPORT_SYMBOL(\name )
.endm
#else
.macro bitop, name, instr
@@ -77,7 +74,6 @@ UNWIND( .fnstart )
ret lr
UNWIND( .fnend )
ENDPROC(\name )
-EXPORT_SYMBOL(\name )
.endm
/**
@@ -106,6 +102,5 @@ UNWIND( .fnstart )
ret lr
UNWIND( .fnend )
ENDPROC(\name )
-EXPORT_SYMBOL(\name )
.endm
#endif
diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
index f402786217..1cfdb138d2 100644
--- a/arch/arm/lib/changebit.S
+++ b/arch/arm/lib/changebit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
bitop _change_bit, eor
+
+EXPORT_SYMBOL(_change_bit)
diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
index f6b75fb64d..e901ca5af0 100644
--- a/arch/arm/lib/clearbit.S
+++ b/arch/arm/lib/clearbit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
bitop _clear_bit, bic
+
+EXPORT_SYMBOL(_clear_bit)
diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
index 618fedae4b..3c8b11240f 100644
--- a/arch/arm/lib/setbit.S
+++ b/arch/arm/lib/setbit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
bitop _set_bit, orr
+
+EXPORT_SYMBOL(_set_bit)
diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
index 4becdc3a59..e3d19b87fb 100644
--- a/arch/arm/lib/testchangebit.S
+++ b/arch/arm/lib/testchangebit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
testop _test_and_change_bit, eor, str
+
+EXPORT_SYMBOL(_test_and_change_bit)
diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
index 918841dcce..d247e6f70f 100644
--- a/arch/arm/lib/testclearbit.S
+++ b/arch/arm/lib/testclearbit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
testop _test_and_clear_bit, bicne, strne
+
+EXPORT_SYMBOL(_test_and_clear_bit)
diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
index 8d1b2fe9e4..76800ff601 100644
--- a/arch/arm/lib/testsetbit.S
+++ b/arch/arm/lib/testsetbit.S
@@ -9,7 +9,10 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/export.h>
#include "bitops.h"
.text
testop _test_and_set_bit, orreq, streq
+
+EXPORT_SYMBOL(_test_and_set_bit)
^ permalink raw reply related [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
2016-11-20 17:03 ` Nicolas Pitre
(?)
@ 2016-11-20 17:22 ` Russell King - ARM Linux
-1 siblings, 0 replies; 29+ messages in thread
From: Russell King - ARM Linux @ 2016-11-20 17:22 UTC (permalink / raw)
To: Nicolas Pitre
Cc: Tobias Jakobi, linux-samsung-soc, viro, linux-arm-kernel, linux-kernel
On Sun, Nov 20, 2016 at 12:03:50PM -0500, Nicolas Pitre wrote:
> On Sun, 20 Nov 2016, Russell King - ARM Linux wrote:
>
> > On Sun, Nov 20, 2016 at 01:56:16PM +0100, Tobias Jakobi wrote:
> > > Hey Russell,
> > >
> > > thanks for the quick reply and looking into this!
> > >
> > > Added Nicolas Pitre to Cc since the ksym trim stuff came from him.
> >
> > Arnd's patch "kbuild: provide include/asm/asm-prototypes.h for ARM" fixes
> > it, but I think it's a mixture of fixes, and partially dependent on some
> > other patches. I don't know what the status of his patch is, but my
> > feeling is that it consists of more than a single fix, and needs
> > splitting. Certainly the asm-prototypes.h is not relevant to this
> > problem, but the rest of it seems to be.
>
> Well... the problem for the current breakage was identified a while ago:
>
> https://lkml.org/lkml/2016/2/10/686
>
> I'm surprised that Al didn't fold my patch into his. Now that this has
> hit mainline, CONFIG_TRIM_UNUSED_KSYMS is now broken on ARM.
>
> And I don't see how the asm-prototypes.h is going to fix it either (if
> anything, at the moment it looks like it might be another source of
> breakage).
>
> So I think the folowing patch should go into mainline:
... which looks the same as Arnd's patch with the following changes:
- no asm-prototypes.h
- adding asm/export.h to each file using EXPORT_SYMBOL() instead of
bitops.h
- not touching:
arch/arm/lib/csumpartialcopy.S
arch/arm/lib/csumpartialcopygeneric.S
arch/arm/lib/csumpartialcopyuser.S
other than that, it's doing the same thing.
I think Arnd's changes to the csumpartial code are unnecessary, and
yours is, although larger, puts the asm/export.h include in the right
place. So please drop yours into the patch system so we can move
forward fixing some of the problems created during the last merge
window.
> ----- >8
> >From 3225f625c116a350c54f361df491bf3e1c6d32b3 Mon Sep 17 00:00:00 2001
> From: Nicolas Pitre <nicolas.pitre@linaro.org>
> Date: Wed, 10 Feb 2016 17:40:04 -0500
> Subject: [PATCH] ARM: don't use assembler macro arguments with EXPORT_SYMBOL()
>
> Committ 4dd1837d75 ("arm: move exports to definitions") added
> EXPORT_SYMBOL(\name) to bitops.h. Here \name is an assembler macro
> argument which is not subject to preprocessor substitutions. And the
> assembler doesn't handle preprocessor macros either. That has the effect
> of breaking CONFIG_TRIM_UNUSED_KSYMS=y.
>
> Signed-off-by: Nicolas Pitre <nico@linaro.org>
>
> diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
> index df06638b32..7d807cfd8e 100644
> --- a/arch/arm/lib/bitops.h
> +++ b/arch/arm/lib/bitops.h
> @@ -1,6 +1,5 @@
> #include <asm/assembler.h>
> #include <asm/unwind.h>
> -#include <asm/export.h>
>
> #if __LINUX_ARM_ARCH__ >= 6
> .macro bitop, name, instr
> @@ -26,7 +25,6 @@ UNWIND( .fnstart )
> bx lr
> UNWIND( .fnend )
> ENDPROC(\name )
> -EXPORT_SYMBOL(\name )
> .endm
>
> .macro testop, name, instr, store
> @@ -57,7 +55,6 @@ UNWIND( .fnstart )
> 2: bx lr
> UNWIND( .fnend )
> ENDPROC(\name )
> -EXPORT_SYMBOL(\name )
> .endm
> #else
> .macro bitop, name, instr
> @@ -77,7 +74,6 @@ UNWIND( .fnstart )
> ret lr
> UNWIND( .fnend )
> ENDPROC(\name )
> -EXPORT_SYMBOL(\name )
> .endm
>
> /**
> @@ -106,6 +102,5 @@ UNWIND( .fnstart )
> ret lr
> UNWIND( .fnend )
> ENDPROC(\name )
> -EXPORT_SYMBOL(\name )
> .endm
> #endif
> diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
> index f402786217..1cfdb138d2 100644
> --- a/arch/arm/lib/changebit.S
> +++ b/arch/arm/lib/changebit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> bitop _change_bit, eor
> +
> +EXPORT_SYMBOL(_change_bit)
> diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
> index f6b75fb64d..e901ca5af0 100644
> --- a/arch/arm/lib/clearbit.S
> +++ b/arch/arm/lib/clearbit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> bitop _clear_bit, bic
> +
> +EXPORT_SYMBOL(_clear_bit)
> diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
> index 618fedae4b..3c8b11240f 100644
> --- a/arch/arm/lib/setbit.S
> +++ b/arch/arm/lib/setbit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> bitop _set_bit, orr
> +
> +EXPORT_SYMBOL(_set_bit)
> diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
> index 4becdc3a59..e3d19b87fb 100644
> --- a/arch/arm/lib/testchangebit.S
> +++ b/arch/arm/lib/testchangebit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> testop _test_and_change_bit, eor, str
> +
> +EXPORT_SYMBOL(_test_and_change_bit)
> diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
> index 918841dcce..d247e6f70f 100644
> --- a/arch/arm/lib/testclearbit.S
> +++ b/arch/arm/lib/testclearbit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> testop _test_and_clear_bit, bicne, strne
> +
> +EXPORT_SYMBOL(_test_and_clear_bit)
> diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
> index 8d1b2fe9e4..76800ff601 100644
> --- a/arch/arm/lib/testsetbit.S
> +++ b/arch/arm/lib/testsetbit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> testop _test_and_set_bit, orreq, streq
> +
> +EXPORT_SYMBOL(_test_and_set_bit)
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 17:22 ` Russell King - ARM Linux
0 siblings, 0 replies; 29+ messages in thread
From: Russell King - ARM Linux @ 2016-11-20 17:22 UTC (permalink / raw)
To: Nicolas Pitre
Cc: Tobias Jakobi, linux-samsung-soc, viro, linux-arm-kernel, linux-kernel
On Sun, Nov 20, 2016 at 12:03:50PM -0500, Nicolas Pitre wrote:
> On Sun, 20 Nov 2016, Russell King - ARM Linux wrote:
>
> > On Sun, Nov 20, 2016 at 01:56:16PM +0100, Tobias Jakobi wrote:
> > > Hey Russell,
> > >
> > > thanks for the quick reply and looking into this!
> > >
> > > Added Nicolas Pitre to Cc since the ksym trim stuff came from him.
> >
> > Arnd's patch "kbuild: provide include/asm/asm-prototypes.h for ARM" fixes
> > it, but I think it's a mixture of fixes, and partially dependent on some
> > other patches. I don't know what the status of his patch is, but my
> > feeling is that it consists of more than a single fix, and needs
> > splitting. Certainly the asm-prototypes.h is not relevant to this
> > problem, but the rest of it seems to be.
>
> Well... the problem for the current breakage was identified a while ago:
>
> https://lkml.org/lkml/2016/2/10/686
>
> I'm surprised that Al didn't fold my patch into his. Now that this has
> hit mainline, CONFIG_TRIM_UNUSED_KSYMS is now broken on ARM.
>
> And I don't see how the asm-prototypes.h is going to fix it either (if
> anything, at the moment it looks like it might be another source of
> breakage).
>
> So I think the folowing patch should go into mainline:
... which looks the same as Arnd's patch with the following changes:
- no asm-prototypes.h
- adding asm/export.h to each file using EXPORT_SYMBOL() instead of
bitops.h
- not touching:
arch/arm/lib/csumpartialcopy.S
arch/arm/lib/csumpartialcopygeneric.S
arch/arm/lib/csumpartialcopyuser.S
other than that, it's doing the same thing.
I think Arnd's changes to the csumpartial code are unnecessary, and
yours is, although larger, puts the asm/export.h include in the right
place. So please drop yours into the patch system so we can move
forward fixing some of the problems created during the last merge
window.
> ----- >8
> >From 3225f625c116a350c54f361df491bf3e1c6d32b3 Mon Sep 17 00:00:00 2001
> From: Nicolas Pitre <nicolas.pitre@linaro.org>
> Date: Wed, 10 Feb 2016 17:40:04 -0500
> Subject: [PATCH] ARM: don't use assembler macro arguments with EXPORT_SYMBOL()
>
> Committ 4dd1837d75 ("arm: move exports to definitions") added
> EXPORT_SYMBOL(\name) to bitops.h. Here \name is an assembler macro
> argument which is not subject to preprocessor substitutions. And the
> assembler doesn't handle preprocessor macros either. That has the effect
> of breaking CONFIG_TRIM_UNUSED_KSYMS=y.
>
> Signed-off-by: Nicolas Pitre <nico@linaro.org>
>
> diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
> index df06638b32..7d807cfd8e 100644
> --- a/arch/arm/lib/bitops.h
> +++ b/arch/arm/lib/bitops.h
> @@ -1,6 +1,5 @@
> #include <asm/assembler.h>
> #include <asm/unwind.h>
> -#include <asm/export.h>
>
> #if __LINUX_ARM_ARCH__ >= 6
> .macro bitop, name, instr
> @@ -26,7 +25,6 @@ UNWIND( .fnstart )
> bx lr
> UNWIND( .fnend )
> ENDPROC(\name )
> -EXPORT_SYMBOL(\name )
> .endm
>
> .macro testop, name, instr, store
> @@ -57,7 +55,6 @@ UNWIND( .fnstart )
> 2: bx lr
> UNWIND( .fnend )
> ENDPROC(\name )
> -EXPORT_SYMBOL(\name )
> .endm
> #else
> .macro bitop, name, instr
> @@ -77,7 +74,6 @@ UNWIND( .fnstart )
> ret lr
> UNWIND( .fnend )
> ENDPROC(\name )
> -EXPORT_SYMBOL(\name )
> .endm
>
> /**
> @@ -106,6 +102,5 @@ UNWIND( .fnstart )
> ret lr
> UNWIND( .fnend )
> ENDPROC(\name )
> -EXPORT_SYMBOL(\name )
> .endm
> #endif
> diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
> index f402786217..1cfdb138d2 100644
> --- a/arch/arm/lib/changebit.S
> +++ b/arch/arm/lib/changebit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> bitop _change_bit, eor
> +
> +EXPORT_SYMBOL(_change_bit)
> diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
> index f6b75fb64d..e901ca5af0 100644
> --- a/arch/arm/lib/clearbit.S
> +++ b/arch/arm/lib/clearbit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> bitop _clear_bit, bic
> +
> +EXPORT_SYMBOL(_clear_bit)
> diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
> index 618fedae4b..3c8b11240f 100644
> --- a/arch/arm/lib/setbit.S
> +++ b/arch/arm/lib/setbit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> bitop _set_bit, orr
> +
> +EXPORT_SYMBOL(_set_bit)
> diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
> index 4becdc3a59..e3d19b87fb 100644
> --- a/arch/arm/lib/testchangebit.S
> +++ b/arch/arm/lib/testchangebit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> testop _test_and_change_bit, eor, str
> +
> +EXPORT_SYMBOL(_test_and_change_bit)
> diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
> index 918841dcce..d247e6f70f 100644
> --- a/arch/arm/lib/testclearbit.S
> +++ b/arch/arm/lib/testclearbit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> testop _test_and_clear_bit, bicne, strne
> +
> +EXPORT_SYMBOL(_test_and_clear_bit)
> diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
> index 8d1b2fe9e4..76800ff601 100644
> --- a/arch/arm/lib/testsetbit.S
> +++ b/arch/arm/lib/testsetbit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> testop _test_and_set_bit, orreq, streq
> +
> +EXPORT_SYMBOL(_test_and_set_bit)
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 29+ messages in thread
* commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-20 17:22 ` Russell King - ARM Linux
0 siblings, 0 replies; 29+ messages in thread
From: Russell King - ARM Linux @ 2016-11-20 17:22 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Nov 20, 2016 at 12:03:50PM -0500, Nicolas Pitre wrote:
> On Sun, 20 Nov 2016, Russell King - ARM Linux wrote:
>
> > On Sun, Nov 20, 2016 at 01:56:16PM +0100, Tobias Jakobi wrote:
> > > Hey Russell,
> > >
> > > thanks for the quick reply and looking into this!
> > >
> > > Added Nicolas Pitre to Cc since the ksym trim stuff came from him.
> >
> > Arnd's patch "kbuild: provide include/asm/asm-prototypes.h for ARM" fixes
> > it, but I think it's a mixture of fixes, and partially dependent on some
> > other patches. I don't know what the status of his patch is, but my
> > feeling is that it consists of more than a single fix, and needs
> > splitting. Certainly the asm-prototypes.h is not relevant to this
> > problem, but the rest of it seems to be.
>
> Well... the problem for the current breakage was identified a while ago:
>
> https://lkml.org/lkml/2016/2/10/686
>
> I'm surprised that Al didn't fold my patch into his. Now that this has
> hit mainline, CONFIG_TRIM_UNUSED_KSYMS is now broken on ARM.
>
> And I don't see how the asm-prototypes.h is going to fix it either (if
> anything, at the moment it looks like it might be another source of
> breakage).
>
> So I think the folowing patch should go into mainline:
... which looks the same as Arnd's patch with the following changes:
- no asm-prototypes.h
- adding asm/export.h to each file using EXPORT_SYMBOL() instead of
bitops.h
- not touching:
arch/arm/lib/csumpartialcopy.S
arch/arm/lib/csumpartialcopygeneric.S
arch/arm/lib/csumpartialcopyuser.S
other than that, it's doing the same thing.
I think Arnd's changes to the csumpartial code are unnecessary, and
yours is, although larger, puts the asm/export.h include in the right
place. So please drop yours into the patch system so we can move
forward fixing some of the problems created during the last merge
window.
> ----- >8
> >From 3225f625c116a350c54f361df491bf3e1c6d32b3 Mon Sep 17 00:00:00 2001
> From: Nicolas Pitre <nicolas.pitre@linaro.org>
> Date: Wed, 10 Feb 2016 17:40:04 -0500
> Subject: [PATCH] ARM: don't use assembler macro arguments with EXPORT_SYMBOL()
>
> Committ 4dd1837d75 ("arm: move exports to definitions") added
> EXPORT_SYMBOL(\name) to bitops.h. Here \name is an assembler macro
> argument which is not subject to preprocessor substitutions. And the
> assembler doesn't handle preprocessor macros either. That has the effect
> of breaking CONFIG_TRIM_UNUSED_KSYMS=y.
>
> Signed-off-by: Nicolas Pitre <nico@linaro.org>
>
> diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
> index df06638b32..7d807cfd8e 100644
> --- a/arch/arm/lib/bitops.h
> +++ b/arch/arm/lib/bitops.h
> @@ -1,6 +1,5 @@
> #include <asm/assembler.h>
> #include <asm/unwind.h>
> -#include <asm/export.h>
>
> #if __LINUX_ARM_ARCH__ >= 6
> .macro bitop, name, instr
> @@ -26,7 +25,6 @@ UNWIND( .fnstart )
> bx lr
> UNWIND( .fnend )
> ENDPROC(\name )
> -EXPORT_SYMBOL(\name )
> .endm
>
> .macro testop, name, instr, store
> @@ -57,7 +55,6 @@ UNWIND( .fnstart )
> 2: bx lr
> UNWIND( .fnend )
> ENDPROC(\name )
> -EXPORT_SYMBOL(\name )
> .endm
> #else
> .macro bitop, name, instr
> @@ -77,7 +74,6 @@ UNWIND( .fnstart )
> ret lr
> UNWIND( .fnend )
> ENDPROC(\name )
> -EXPORT_SYMBOL(\name )
> .endm
>
> /**
> @@ -106,6 +102,5 @@ UNWIND( .fnstart )
> ret lr
> UNWIND( .fnend )
> ENDPROC(\name )
> -EXPORT_SYMBOL(\name )
> .endm
> #endif
> diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
> index f402786217..1cfdb138d2 100644
> --- a/arch/arm/lib/changebit.S
> +++ b/arch/arm/lib/changebit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> bitop _change_bit, eor
> +
> +EXPORT_SYMBOL(_change_bit)
> diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
> index f6b75fb64d..e901ca5af0 100644
> --- a/arch/arm/lib/clearbit.S
> +++ b/arch/arm/lib/clearbit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> bitop _clear_bit, bic
> +
> +EXPORT_SYMBOL(_clear_bit)
> diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
> index 618fedae4b..3c8b11240f 100644
> --- a/arch/arm/lib/setbit.S
> +++ b/arch/arm/lib/setbit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> bitop _set_bit, orr
> +
> +EXPORT_SYMBOL(_set_bit)
> diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
> index 4becdc3a59..e3d19b87fb 100644
> --- a/arch/arm/lib/testchangebit.S
> +++ b/arch/arm/lib/testchangebit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> testop _test_and_change_bit, eor, str
> +
> +EXPORT_SYMBOL(_test_and_change_bit)
> diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
> index 918841dcce..d247e6f70f 100644
> --- a/arch/arm/lib/testclearbit.S
> +++ b/arch/arm/lib/testclearbit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> testop _test_and_clear_bit, bicne, strne
> +
> +EXPORT_SYMBOL(_test_and_clear_bit)
> diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
> index 8d1b2fe9e4..76800ff601 100644
> --- a/arch/arm/lib/testsetbit.S
> +++ b/arch/arm/lib/testsetbit.S
> @@ -9,7 +9,10 @@
> */
> #include <linux/linkage.h>
> #include <asm/assembler.h>
> +#include <asm/export.h>
> #include "bitops.h"
> .text
>
> testop _test_and_set_bit, orreq, streq
> +
> +EXPORT_SYMBOL(_test_and_set_bit)
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
2016-11-20 17:22 ` Russell King - ARM Linux
@ 2016-11-22 11:11 ` Arnd Bergmann
-1 siblings, 0 replies; 29+ messages in thread
From: Arnd Bergmann @ 2016-11-22 11:11 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Russell King - ARM Linux, Nicolas Pitre, Tobias Jakobi,
linux-samsung-soc, viro, linux-kernel
On Sunday, November 20, 2016 5:22:48 PM CET Russell King - ARM Linux wrote:
> - not touching:
> arch/arm/lib/csumpartialcopy.S
> arch/arm/lib/csumpartialcopygeneric.S
> arch/arm/lib/csumpartialcopyuser.S
>
> other than that, it's doing the same thing.
>
> I think Arnd's changes to the csumpartial code are unnecessary, and
> yours is, although larger, puts the asm/export.h include in the right
> place. So please drop yours into the patch system so we can move
> forward fixing some of the problems created during the last merge
> window.
Right, the csumpartialcopy*.S changes are no longer needed after
commit cc6acc11cad1 ("kbuild: be more careful about matching
preprocessed asm ___EXPORT_SYMBOL") solves the problem more
generally.
I've submitted a new version of my patch, now just adding the
one header file that is needed to get MODVERSIONS back working,
plus the second patch for mmiocpy/mmioset to partially revert
Al's original change.
Arnd
^ permalink raw reply [flat|nested] 29+ messages in thread
* commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build
@ 2016-11-22 11:11 ` Arnd Bergmann
0 siblings, 0 replies; 29+ messages in thread
From: Arnd Bergmann @ 2016-11-22 11:11 UTC (permalink / raw)
To: linux-arm-kernel
On Sunday, November 20, 2016 5:22:48 PM CET Russell King - ARM Linux wrote:
> - not touching:
> arch/arm/lib/csumpartialcopy.S
> arch/arm/lib/csumpartialcopygeneric.S
> arch/arm/lib/csumpartialcopyuser.S
>
> other than that, it's doing the same thing.
>
> I think Arnd's changes to the csumpartial code are unnecessary, and
> yours is, although larger, puts the asm/export.h include in the right
> place. So please drop yours into the patch system so we can move
> forward fixing some of the problems created during the last merge
> window.
Right, the csumpartialcopy*.S changes are no longer needed after
commit cc6acc11cad1 ("kbuild: be more careful about matching
preprocessed asm ___EXPORT_SYMBOL") solves the problem more
generally.
I've submitted a new version of my patch, now just adding the
one header file that is needed to get MODVERSIONS back working,
plus the second patch for mmiocpy/mmioset to partially revert
Al's original change.
Arnd
^ permalink raw reply [flat|nested] 29+ messages in thread
end of thread, other threads:[~2016-11-22 11:12 UTC | newest]
Thread overview: 29+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-11-20 2:47 commit 4dd1837d7589f468ed109556513f476e7a7f9121 breaks build Tobias Jakobi
2016-11-20 2:47 ` Tobias Jakobi
2016-11-20 2:47 ` Tobias Jakobi
2016-11-20 11:30 ` Russell King - ARM Linux
2016-11-20 11:30 ` Russell King - ARM Linux
2016-11-20 11:30 ` Russell King - ARM Linux
2016-11-20 11:43 ` Tobias Jakobi
2016-11-20 11:43 ` Tobias Jakobi
2016-11-20 11:43 ` Tobias Jakobi
2016-11-20 12:34 ` Russell King - ARM Linux
2016-11-20 12:34 ` Russell King - ARM Linux
2016-11-20 12:34 ` Russell King - ARM Linux
2016-11-20 12:56 ` Tobias Jakobi
2016-11-20 12:56 ` Tobias Jakobi
2016-11-20 12:56 ` Tobias Jakobi
2016-11-20 13:25 ` Russell King - ARM Linux
2016-11-20 13:25 ` Russell King - ARM Linux
2016-11-20 13:25 ` Russell King - ARM Linux
2016-11-20 17:03 ` Nicolas Pitre
2016-11-20 17:03 ` Nicolas Pitre
2016-11-20 17:03 ` Nicolas Pitre
2016-11-20 17:22 ` Russell King - ARM Linux
2016-11-20 17:22 ` Russell King - ARM Linux
2016-11-20 17:22 ` Russell King - ARM Linux
2016-11-22 11:11 ` Arnd Bergmann
2016-11-22 11:11 ` Arnd Bergmann
2016-11-20 13:02 ` Corentin Labbe
2016-11-20 13:02 ` Corentin Labbe
2016-11-20 13:02 ` Corentin Labbe
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.