On Mon, Nov 21, 2016 at 12:12:31AM +1000, BALATON Zoltan wrote: > From: Benjamin Herrenschmidt > > It's currently broken as it uses an incorrect shift, it tries > to use the slot number but uses the top bits of the bus number > instead. > > Note: Neither implementation matches what OpenBIOS ends up putting > in the device-tree either, which will have to be fixed separately. > > This is not quite correct for modelling a real Mac since Apple > tend to tie all 4 interrupt lines of a slot together and have > separate interrupts for every slot and every motherboard devices > going straight to the PIC but we'll sort that out later. > > Signed-off-by: Benjamin Herrenschmidt > --- > hw/pci-host/uninorth.c | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > This needs a corresponding fix in OpenBIOS but this has to be > committed first for that. As this is already broken making this change > should not make things worse as they are now. Could we get this in now > as a bugfix commit? Applied to ppc-for-2.8. > > diff --git a/hw/pci-host/uninorth.c b/hw/pci-host/uninorth.c > index 7aac4d6..df342ac 100644 > --- a/hw/pci-host/uninorth.c > +++ b/hw/pci-host/uninorth.c > @@ -62,9 +62,7 @@ typedef struct UNINState { > > static int pci_unin_map_irq(PCIDevice *pci_dev, int irq_num) > { > - int devfn = pci_dev->devfn & 0x00FFFFFF; > - > - return (((devfn >> 11) & 0x1F) + irq_num) & 3; > + return (irq_num + (pci_dev->devfn >> 3)) & 3; > } > > static void pci_unin_set_irq(void *opaque, int irq_num, int level) -- David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson