From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Sat, 17 Dec 2016 14:12:18 +0100 Subject: [Buildroot] [PATCH] BeagleBoard X15: new board In-Reply-To: <20161216222749.p2qhprdn3arg2bpc@skynet.be> References: <20161215223730.4890-1-theo.debrouwere@skynet.be> <87d1gsasv8.fsf@dell.be.48ers.dk> <20161216222749.p2qhprdn3arg2bpc@skynet.be> Message-ID: <20161217141218.1a10616a@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Fri, 16 Dec 2016 23:27:49 +0100, Theo Debrouwere wrote: > U-boot (both ti's release & mainline) currently contains 'console=ttyO2', > but the kernel 'changes' it to ttyS2. > > *snip* > [ 0.000772] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' > [ 0.000779] This ensures that you still see kernel messages. Please > [ 0.000784] update your kernel commandline. > *snip* > > This can be fixed with this config line, although I can also provide a patch. > Or fix it inside the uEnv.txt Then I think it makes sense to provide your own uEnv.txt to fix this. It's somewhat odd that the U-Boot defconfig provided by TI doesn't match the Linux kernel provided by TI in terms of UART naming. Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com