All of lore.kernel.org
 help / color / mirror / Atom feed
From: uwe@kleine-koenig.org (Uwe Kleine-König)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM: dts: turris-omnia: add support for ethernet switch
Date: Thu, 22 Dec 2016 10:43:27 +0100	[thread overview]
Message-ID: <20161222094327.24051-1-uwe@kleine-koenig.org> (raw)

The Turris Omnia features a Marvell MV88E7176 ethernet switch. Add it to
the dts.

Signed-off-by: Uwe Kleine-K?nig <uwe@kleine-koenig.org>
---
Changes since (implicit) v1:
 - drop mdio bus and per port phy-handle as they match the default
   setup.

One thing I was surprised is that the mv88e6xxx module isn't autoloaded
by udev. Is this expected?

Best regards
Uwe

 arch/arm/boot/dts/armada-385-turris-omnia.dts | 66 ++++++++++++++++++++++++++-
 1 file changed, 64 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index ab49acb2d452..f8e55fa7f0fa 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -122,7 +122,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&ge0_rgmii_pins>;
 	status = "okay";
-	phy-mode = "rgmii-id";
+	phy-mode = "rgmii";
 
 	fixed-link {
 		speed = <1000>;
@@ -135,7 +135,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&ge1_rgmii_pins>;
 	status = "okay";
-	phy-mode = "rgmii-id";
+	phy-mode = "rgmii";
 
 	fixed-link {
 		speed = <1000>;
@@ -274,6 +274,68 @@
 	};
 
 	/* Switch MV88E7176 at address 0x10 */
+	switch at 10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dsa,member = <0 0>;
+
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports at 0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			ports at 1 {
+				reg = <1>;
+				label = "lan1";
+			};
+
+			ports at 2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			ports at 3 {
+				reg = <3>;
+				label = "lan3";
+			};
+
+			ports at 4 {
+				reg = <4>;
+				label = "lan4";
+			};
+
+			ports at 5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ports at 6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
 };
 
 &pinctrl {
-- 
2.11.0

             reply	other threads:[~2016-12-22  9:43 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-22  9:43 Uwe Kleine-König [this message]
2017-01-03 15:21 ` [PATCH v2] ARM: dts: turris-omnia: add support for ethernet switch Andrew Lunn
2017-01-03 19:35   ` [PATCH v3] " Uwe Kleine-König
2017-01-03 20:10     ` Andrew Lunn
2017-01-04 10:49     ` Andreas Färber
2017-01-04 13:41       ` Andrew Lunn
2017-01-05 12:40         ` Andreas Färber
2017-01-05 12:57     ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161222094327.24051-1-uwe@kleine-koenig.org \
    --to=uwe@kleine-koenig.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.