From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gary Bisson Subject: Re: [PATCH 2/2] ARM: dts: imx6qdl-nitrogen6_som2: fix sgtl5000 pinctrl init Date: Tue, 3 Jan 2017 14:41:55 +0100 Message-ID: <20170103134155.5mgn4ebq2afikwtm@t450s.lan> References: <20170103112247.4563-1-gary.bisson@boundarydevices.com> <20170103112247.4563-3-gary.bisson@boundarydevices.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <20170103112247.4563-3-gary.bisson@boundarydevices.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: shawnguo@kernel.org Cc: fabio.estevam@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Hi Shawn, On Tue, Jan 03, 2017 at 12:22:47PM +0100, Gary Bisson wrote: > Since the codec is probed first, the pinctrl node should be > under the codec node. > > The codec init was working for this board since U-Boot was > already setting GPIO_0 as CLKO1 but better fix it anyway. > > Signed-off-by: Gary Bisson Fixes: 3faa1bb2e89c ("ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support") Thanks, Gary From mboxrd@z Thu Jan 1 00:00:00 1970 From: gary.bisson@boundarydevices.com (Gary Bisson) Date: Tue, 3 Jan 2017 14:41:55 +0100 Subject: [PATCH 2/2] ARM: dts: imx6qdl-nitrogen6_som2: fix sgtl5000 pinctrl init In-Reply-To: <20170103112247.4563-3-gary.bisson@boundarydevices.com> References: <20170103112247.4563-1-gary.bisson@boundarydevices.com> <20170103112247.4563-3-gary.bisson@boundarydevices.com> Message-ID: <20170103134155.5mgn4ebq2afikwtm@t450s.lan> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Shawn, On Tue, Jan 03, 2017 at 12:22:47PM +0100, Gary Bisson wrote: > Since the codec is probed first, the pinctrl node should be > under the codec node. > > The codec init was working for this board since U-Boot was > already setting GPIO_0 as CLKO1 but better fix it anyway. > > Signed-off-by: Gary Bisson Fixes: 3faa1bb2e89c ("ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support") Thanks, Gary