[PATCHv14 3/3] usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY

[Heikki Krogerus <heikki.krogerus@linux.intel.com>]

This adds driver for the USB Type-C PHY on Intel WhiskeyCove
PMIC which is available on some of the Intel Broxton SoC
based platforms.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
 drivers/usb/typec/Kconfig       |  14 ++
 drivers/usb/typec/Makefile      |   1 +
 drivers/usb/typec/typec_wcove.c | 377 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 392 insertions(+)
 create mode 100644 drivers/usb/typec/typec_wcove.c

diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index 17792f9114c6..2abbcb021d1b 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -4,4 +4,18 @@ menu "USB Power Delivery and Type-C drivers"
 config TYPEC
 	tristate
 
+config TYPEC_WCOVE
+	tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver"
+	depends on ACPI
+	depends on INTEL_SOC_PMIC
+	depends on INTEL_PMC_IPC
+	select TYPEC
+	help
+	  This driver adds support for USB Type-C detection on Intel Broxton
+	  platforms that have Intel Whiskey Cove PMIC. The driver can detect the
+	  role and cable orientation.
+
+	  To compile this driver as module, choose M here: the module will be
+	  called typec_wcove
+
 endmenu
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
index 1012a8bed6d5..b9cb862221af 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_TYPEC)		+= typec.o
+obj-$(CONFIG_TYPEC_WCOVE)	+= typec_wcove.o
diff --git a/drivers/usb/typec/typec_wcove.c b/drivers/usb/typec/typec_wcove.c
new file mode 100644
index 000000000000..d5a7b21fa3f1
--- /dev/null
+++ b/drivers/usb/typec/typec_wcove.c
@@ -0,0 +1,377 @@
+/**
+ * typec_wcove.c - WhiskeyCove PMIC USB Type-C PHY driver
+ *
+ * Copyright (C) 2017 Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/usb/typec.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/intel_soc_pmic.h>
+
+/* Register offsets */
+#define WCOVE_CHGRIRQ0		0x4e09
+#define WCOVE_PHYCTRL		0x5e07
+
+#define USBC_CONTROL1		0x7001
+#define USBC_CONTROL2		0x7002
+#define USBC_CONTROL3		0x7003
+#define USBC_CC1_CTRL		0x7004
+#define USBC_CC2_CTRL		0x7005
+#define USBC_STATUS1		0x7007
+#define USBC_STATUS2		0x7008
+#define USBC_STATUS3		0x7009
+#define USBC_IRQ1		0x7015
+#define USBC_IRQ2		0x7016
+#define USBC_IRQMASK1		0x7017
+#define USBC_IRQMASK2		0x7018
+
+/* Register bits */
+
+#define USBC_CONTROL1_MODE_DRP(r)	(((r) & ~0x7) | 4)
+
+#define USBC_CONTROL2_UNATT_SNK		BIT(0)
+#define USBC_CONTROL2_UNATT_SRC		BIT(1)
+#define USBC_CONTROL2_DIS_ST		BIT(2)
+
+#define USBC_CONTROL3_PD_DIS		BIT(1)
+
+#define USBC_CC_CTRL_VCONN_EN		BIT(1)
+
+#define USBC_STATUS1_DET_ONGOING	BIT(6)
+#define USBC_STATUS1_RSLT(r)		((r) & 0xf)
+#define USBC_RSLT_NOTHING		0
+#define USBC_RSLT_SRC_DEFAULT		1
+#define USBC_RSLT_SRC_1_5A		2
+#define USBC_RSLT_SRC_3_0A		3
+#define USBC_RSLT_SNK			4
+#define USBC_RSLT_DEBUG_ACC		5
+#define USBC_RSLT_AUDIO_ACC		6
+#define USBC_RSLT_UNDEF			15
+#define USBC_STATUS1_ORIENT(r)		(((r) >> 4) & 0x3)
+#define USBC_ORIENT_NORMAL		1
+#define USBC_ORIENT_REVERSE		2
+
+#define USBC_STATUS2_VBUS_REQ		BIT(5)
+
+#define USBC_IRQ1_ADCDONE1		BIT(2)
+#define USBC_IRQ1_OVERTEMP		BIT(1)
+#define USBC_IRQ1_SHORT			BIT(0)
+
+#define USBC_IRQ2_CC_CHANGE		BIT(7)
+#define USBC_IRQ2_RX_PD			BIT(6)
+#define USBC_IRQ2_RX_HR			BIT(5)
+#define USBC_IRQ2_RX_CR			BIT(4)
+#define USBC_IRQ2_TX_SUCCESS		BIT(3)
+#define USBC_IRQ2_TX_FAIL		BIT(2)
+
+#define USBC_IRQMASK1_ALL	(USBC_IRQ1_ADCDONE1 | USBC_IRQ1_OVERTEMP | \
+				 USBC_IRQ1_SHORT)
+
+#define USBC_IRQMASK2_ALL	(USBC_IRQ2_CC_CHANGE | USBC_IRQ2_RX_PD | \
+				 USBC_IRQ2_RX_HR | USBC_IRQ2_RX_CR | \
+				 USBC_IRQ2_TX_SUCCESS | USBC_IRQ2_TX_FAIL)
+
+struct wcove_typec {
+	struct mutex lock; /* device lock */
+	struct device *dev;
+	struct regmap *regmap;
+	struct typec_port *port;
+	struct typec_capability cap;
+	struct typec_partner *partner;
+};
+
+enum wcove_typec_func {
+	WCOVE_FUNC_DRIVE_VBUS = 1,
+	WCOVE_FUNC_ORIENTATION,
+	WCOVE_FUNC_ROLE,
+	WCOVE_FUNC_DRIVE_VCONN,
+};
+
+enum wcove_typec_orientation {
+	WCOVE_ORIENTATION_NORMAL,
+	WCOVE_ORIENTATION_REVERSE,
+};
+
+enum wcove_typec_role {
+	WCOVE_ROLE_HOST,
+	WCOVE_ROLE_DEVICE,
+};
+
+static uuid_le uuid = UUID_LE(0x482383f0, 0x2876, 0x4e49,
+			      0x86, 0x85, 0xdb, 0x66, 0x21, 0x1a, 0xf0, 0x37);
+
+static int wcove_typec_func(struct wcove_typec *wcove,
+			    enum wcove_typec_func func, int param)
+{
+	union acpi_object *obj;
+	union acpi_object tmp;
+	union acpi_object argv4 = ACPI_INIT_DSM_ARGV4(1, &tmp);
+
+	tmp.type = ACPI_TYPE_INTEGER;
+	tmp.integer.value = param;
+
+	obj = acpi_evaluate_dsm(ACPI_HANDLE(wcove->dev), uuid.b, 1, func,
+				&argv4);
+	if (!obj) {
+		dev_err(wcove->dev, "%s: failed to evaluate _DSM\n", __func__);
+		return -EIO;
+	}
+
+	ACPI_FREE(obj);
+	return 0;
+}
+
+static irqreturn_t wcove_typec_irq(int irq, void *data)
+{
+	enum typec_role role = TYPEC_SINK;
+	struct typec_partner_desc partner;
+	struct wcove_typec *wcove = data;
+	unsigned int cc1_ctrl;
+	unsigned int cc2_ctrl;
+	unsigned int cc_irq1;
+	unsigned int cc_irq2;
+	unsigned int status1;
+	unsigned int status2;
+	int ret;
+
+	mutex_lock(&wcove->lock);
+
+	ret = regmap_read(wcove->regmap, USBC_IRQ1, &cc_irq1);
+	if (ret)
+		goto err;
+
+	ret = regmap_read(wcove->regmap, USBC_IRQ2, &cc_irq2);
+	if (ret)
+		goto err;
+
+	ret = regmap_read(wcove->regmap, USBC_STATUS1, &status1);
+	if (ret)
+		goto err;
+
+	ret = regmap_read(wcove->regmap, USBC_STATUS2, &status2);
+	if (ret)
+		goto err;
+
+	ret = regmap_read(wcove->regmap, USBC_CC1_CTRL, &cc1_ctrl);
+	if (ret)
+		goto err;
+
+	ret = regmap_read(wcove->regmap, USBC_CC2_CTRL, &cc2_ctrl);
+	if (ret)
+		goto err;
+
+	if (cc_irq1) {
+		if (cc_irq1 & USBC_IRQ1_OVERTEMP)
+			dev_err(wcove->dev, "VCONN Switch Over Temperature!\n");
+		if (cc_irq1 & USBC_IRQ1_SHORT)
+			dev_err(wcove->dev, "VCONN Switch Short Circuit!\n");
+		ret = regmap_write(wcove->regmap, USBC_IRQ1, cc_irq1);
+		if (ret)
+			goto err;
+	}
+
+	if (cc_irq2) {
+		ret = regmap_write(wcove->regmap, USBC_IRQ2, cc_irq2);
+		if (ret)
+			goto err;
+		/*
+		 * Ignoring any PD communication interrupts until the PD support
+		 * is available
+		 */
+		if (cc_irq2 & ~USBC_IRQ2_CC_CHANGE) {
+			dev_WARN(wcove->dev, "USB PD handling missing\n");
+			goto err;
+		}
+	}
+
+	if (status1 & USBC_STATUS1_DET_ONGOING)
+		goto out;
+
+	if (USBC_STATUS1_RSLT(status1) == USBC_RSLT_NOTHING) {
+		if (wcove->partner) {
+			typec_unregister_partner(wcove->partner);
+			wcove->partner = NULL;
+		}
+
+		wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
+				 WCOVE_ORIENTATION_NORMAL);
+
+		/* This makes sure the device controller is disconnected */
+		wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST);
+
+		/* Port to default role */
+		typec_set_data_role(wcove->port, TYPEC_DEVICE);
+		typec_set_pwr_role(wcove->port, TYPEC_SINK);
+		typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_USB);
+
+		goto out;
+	}
+
+	if (wcove->partner)
+		goto out;
+
+	switch (USBC_STATUS1_ORIENT(status1)) {
+	case USBC_ORIENT_NORMAL:
+		wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
+				 WCOVE_ORIENTATION_NORMAL);
+		break;
+	case USBC_ORIENT_REVERSE:
+		wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
+				 WCOVE_ORIENTATION_REVERSE);
+	default:
+		break;
+	}
+
+	memset(&partner, 0, sizeof(partner));
+
+	switch (USBC_STATUS1_RSLT(status1)) {
+	case USBC_RSLT_SRC_DEFAULT:
+		typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_USB);
+		break;
+	case USBC_RSLT_SRC_1_5A:
+		typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_1_5A);
+		break;
+	case USBC_RSLT_SRC_3_0A:
+		typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_3_0A);
+		break;
+	case USBC_RSLT_SNK:
+		role = TYPEC_SOURCE;
+		break;
+	case USBC_RSLT_DEBUG_ACC:
+		partner.accessory = TYPEC_ACCESSORY_DEBUG;
+		break;
+	case USBC_RSLT_AUDIO_ACC:
+		partner.accessory = TYPEC_ACCESSORY_AUDIO;
+		break;
+	default:
+		dev_WARN(wcove->dev, "%s Undefined result\n", __func__);
+		goto err;
+	}
+
+	if (role == TYPEC_SINK) {
+		wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_DEVICE);
+		typec_set_data_role(wcove->port, TYPEC_DEVICE);
+		typec_set_pwr_role(wcove->port, TYPEC_SINK);
+	} else {
+		wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST);
+		typec_set_pwr_role(wcove->port, TYPEC_SOURCE);
+		typec_set_data_role(wcove->port, TYPEC_HOST);
+	}
+
+	wcove->partner = typec_register_partner(wcove->port, &partner);
+	if (!wcove->partner)
+		dev_err(wcove->dev, "failed register partner\n");
+out:
+	/* If either CC pins is requesting VCONN, we turn it on */
+	if ((cc1_ctrl & USBC_CC_CTRL_VCONN_EN) ||
+	    (cc2_ctrl &	USBC_CC_CTRL_VCONN_EN))
+		wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, true);
+	else
+		wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, false);
+
+	/* Relying on the FSM to know when we need to drive VBUS. */
+	wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VBUS,
+			 !!(status2 & USBC_STATUS2_VBUS_REQ));
+err:
+	/* REVISIT: Clear WhiskeyCove CHGR Type-C interrupt */
+	regmap_write(wcove->regmap, WCOVE_CHGRIRQ0, BIT(5));
+
+	mutex_unlock(&wcove->lock);
+	return IRQ_HANDLED;
+}
+
+static int wcove_typec_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	struct wcove_typec *wcove;
+	unsigned int val;
+	int ret;
+
+	wcove = devm_kzalloc(&pdev->dev, sizeof(*wcove), GFP_KERNEL);
+	if (!wcove)
+		return -ENOMEM;
+
+	mutex_init(&wcove->lock);
+	wcove->dev = &pdev->dev;
+	wcove->regmap = pmic->regmap;
+
+	ret = regmap_irq_get_virq(pmic->irq_chip_data_level2,
+				  platform_get_irq(pdev, 0));
+	if (ret < 0)
+		return ret;
+
+	ret = devm_request_threaded_irq(&pdev->dev, ret, NULL,
+					wcove_typec_irq, IRQF_ONESHOT,
+					"wcove_typec", wcove);
+	if (ret)
+		return ret;
+
+	if (!acpi_check_dsm(ACPI_HANDLE(&pdev->dev), uuid.b, 0, 0x1f)) {
+		dev_err(&pdev->dev, "Missing _DSM functions\n");
+		return -ENODEV;
+	}
+
+	wcove->cap.type = TYPEC_PORT_DRP;
+	wcove->cap.revision = USB_TYPEC_REV_1_1;
+	wcove->cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
+
+	/* Make sure the PD PHY is disabled until USB PD is available */
+	regmap_read(wcove->regmap, USBC_CONTROL3, &val);
+	regmap_write(wcove->regmap, USBC_CONTROL3, val | USBC_CONTROL3_PD_DIS);
+
+	/* DRP mode without accessory support */
+	regmap_read(wcove->regmap, USBC_CONTROL1, &val);
+	regmap_write(wcove->regmap, USBC_CONTROL1, USBC_CONTROL1_MODE_DRP(val));
+
+	wcove->port = typec_register_port(&pdev->dev, &wcove->cap);
+	if (!wcove->port)
+		return -ENODEV;
+
+	/* Unmask everything */
+	regmap_read(wcove->regmap, USBC_IRQMASK1, &val);
+	regmap_write(wcove->regmap, USBC_IRQMASK1, val & ~USBC_IRQMASK1_ALL);
+	regmap_read(wcove->regmap, USBC_IRQMASK2, &val);
+	regmap_write(wcove->regmap, USBC_IRQMASK2, val & ~USBC_IRQMASK2_ALL);
+
+	platform_set_drvdata(pdev, wcove);
+	return 0;
+}
+
+static int wcove_typec_remove(struct platform_device *pdev)
+{
+	struct wcove_typec *wcove = platform_get_drvdata(pdev);
+	unsigned int val;
+
+	/* Mask everything */
+	regmap_read(wcove->regmap, USBC_IRQMASK1, &val);
+	regmap_write(wcove->regmap, USBC_IRQMASK1, val | USBC_IRQMASK1_ALL);
+	regmap_read(wcove->regmap, USBC_IRQMASK2, &val);
+	regmap_write(wcove->regmap, USBC_IRQMASK2, val | USBC_IRQMASK2_ALL);
+
+	typec_unregister_partner(wcove->partner);
+	typec_unregister_port(wcove->port);
+	return 0;
+}
+
+static struct platform_driver wcove_typec_driver = {
+	.driver = {
+		.name		= "bxt_wcove_usbc",
+	},
+	.probe			= wcove_typec_probe,
+	.remove			= wcove_typec_remove,
+};
+
+module_platform_driver(wcove_typec_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("WhiskeyCove PMIC USB Type-C PHY driver");
+MODULE_ALIAS("platform:bxt_wcove_usbc");
-- 
2.11.0