On Mon, Jan 02, 2017 at 11:03:44PM +0000, Andre Przywara wrote: > Signed-off-by: Andre Przywara > --- > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 67 +++++++++++++++++++++++++++ > 1 file changed, 67 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > index e0dcab8..c680566 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > @@ -150,6 +150,32 @@ > pins = "PB8", "PB9"; > function = "uart0"; > }; > + > + mmc0_pins: mmc0@0 { > + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; > + function = "mmc0"; > + drive-strength = <30>; > + }; > + > + mmc0_default_cd_pin: mmc0_cd_pin@0 { > + pins = "PF6"; > + function = "gpio_in"; > + bias-pull-up; > + }; > + > + mmc1_pins: mmc1@0 { > + pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; > + function = "mmc1"; > + drive-strength = <30>; > + }; > + > + mmc2_pins: mmc2@0 { > + pins = "PC1", "PC5", "PC6", "PC8", "PC9", > + "PC10", "PC11", "PC12", "PC13", "PC14", > + "PC15", "PC16"; > + function = "mmc2"; > + drive-strength = <30>; > + }; > }; > > uart0: serial@1c28000 { > @@ -240,6 +266,47 @@ > #size-cells = <0>; > }; > > + mmc0: mmc@1c0f000 { > + compatible = "allwinner,sun50i-a64-mmc", > + "allwinner,sun5i-a13-mmc"; That's not correct. There's a bunch of features that are broken without A64-specific (or at least not present on the A13) quirks. Those features include for example the SDIO aggregation that are currently broken for all modes supported so far. I was in holidays and send those patches tomorrow, but you were a bit too quick :) Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com