From: Richard Hansen <hansenr@google.com>
To: git@vger.kernel.org
Cc: davvid@gmail.com, j6t@kdbg.org, hansenr@google.com,
sbeller@google.com, simon@ruderich.org
Subject: [PATCH v2 2/4] t7610: make tests more independent and debuggable
Date: Thu, 5 Jan 2017 20:09:43 -0500 [thread overview]
Message-ID: <20170106010945.79382-3-hansenr@google.com> (raw)
In-Reply-To: <20170106010945.79382-1-hansenr@google.com>
[-- Attachment #1: Type: text/plain, Size: 14301 bytes --]
Reduce how much a test can interfere other tests:
* Move setup code that multiple tests depend on to the 'setup' test
case.
* Run 'git reset --hard' after every test (pass or fail) to clean up
in case the test fails and leaves the repository in a strange
state.
* If the repository must be in a particular state (beyond what is
already done by the 'setup' test case) before the test can run,
make the necessary repository changes in the test script even if
it means duplicating some lines of code from the previous test
case.
* Never assume that a particular commit is checked out.
* Always work on a test-specific branch when the test might create a
commit. This is not always necessary for correctness, but it
improves debuggability by ensuring a commit created by test #N
shows up on the testN branch, not the branch for test #N-1.
Signed-off-by: Richard Hansen <hansenr@google.com>
---
t/t7610-mergetool.sh | 146 +++++++++++++++++++++++++++++----------------------
1 file changed, 84 insertions(+), 62 deletions(-)
diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh
index 14090739f..2c06cf73f 100755
--- a/t/t7610-mergetool.sh
+++ b/t/t7610-mergetool.sh
@@ -55,6 +55,22 @@ test_expect_success 'setup' '
git rm file12 &&
git commit -m "branch1 changes" &&
+ git checkout -b delete-base branch1 &&
+ mkdir -p a/a &&
+ (echo one; echo two; echo 3; echo 4) >a/a/file.txt &&
+ git add a/a/file.txt &&
+ git commit -m"base file" &&
+ git checkout -b move-to-b delete-base &&
+ mkdir -p b/b &&
+ git mv a/a/file.txt b/b/file.txt &&
+ (echo one; echo two; echo 4) >b/b/file.txt &&
+ git commit -a -m"move to b" &&
+ git checkout -b move-to-c delete-base &&
+ mkdir -p c/c &&
+ git mv a/a/file.txt c/c/file.txt &&
+ (echo one; echo two; echo 3) >c/c/file.txt &&
+ git commit -a -m"move to c" &&
+
git checkout -b stash1 master &&
echo stash1 change file11 >file11 &&
git add file11 &&
@@ -86,6 +102,23 @@ test_expect_success 'setup' '
git rm file11 &&
git commit -m "master updates" &&
+ git clean -fdx &&
+ git checkout -b order-file-start master &&
+ echo start >a &&
+ echo start >b &&
+ git add a b &&
+ git commit -m start &&
+ git checkout -b order-file-side1 order-file-start &&
+ echo side1 >a &&
+ echo side1 >b &&
+ git add a b &&
+ git commit -m side1 &&
+ git checkout -b order-file-side2 order-file-start &&
+ echo side2 >a &&
+ echo side2 >b &&
+ git add a b &&
+ git commit -m side2 &&
+
git config merge.tool mytool &&
git config mergetool.mytool.cmd "cat \"\$REMOTE\" >\"\$MERGED\"" &&
git config mergetool.mytool.trustExitCode true &&
@@ -94,6 +127,7 @@ test_expect_success 'setup' '
'
test_expect_success 'custom mergetool' '
+ test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
test_must_fail git merge master >/dev/null 2>&1 &&
@@ -112,6 +146,7 @@ test_expect_success 'custom mergetool' '
'
test_expect_success 'mergetool crlf' '
+ test_when_finished "git reset --hard" &&
test_config core.autocrlf true &&
git checkout -b test$test_count branch1 &&
test_must_fail git merge master >/dev/null 2>&1 &&
@@ -129,11 +164,11 @@ test_expect_success 'mergetool crlf' '
git submodule update -N &&
test "$(cat submod/bar)" = "master submodule" &&
git commit -m "branch1 resolved with mergetool - autocrlf" &&
- test_config core.autocrlf false &&
- git reset --hard
+ test_config core.autocrlf false
'
test_expect_success 'mergetool in subdir' '
+ test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
(
@@ -145,8 +180,13 @@ test_expect_success 'mergetool in subdir' '
'
test_expect_success 'mergetool on file in parent dir' '
+ test_when_finished "git reset --hard" &&
+ git checkout -b test$test_count branch1 &&
+ git submodule update -N &&
(
cd subdir &&
+ test_must_fail git merge master >/dev/null 2>&1 &&
+ ( yes "" | git mergetool file3 >/dev/null 2>&1 ) &&
( yes "" | git mergetool ../file1 >/dev/null 2>&1 ) &&
( yes "" | git mergetool ../file2 ../spaced\ name >/dev/null 2>&1 ) &&
( yes "" | git mergetool ../both >/dev/null 2>&1 ) &&
@@ -161,6 +201,7 @@ test_expect_success 'mergetool on file in parent dir' '
'
test_expect_success 'mergetool skips autoresolved' '
+ test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
test_must_fail git merge master &&
@@ -169,11 +210,12 @@ test_expect_success 'mergetool skips autoresolved' '
( yes "d" | git mergetool file12 >/dev/null 2>&1 ) &&
( yes "l" | git mergetool submod >/dev/null 2>&1 ) &&
output="$(git mergetool --no-prompt)" &&
- test "$output" = "No files need merging" &&
- git reset --hard
+ test "$output" = "No files need merging"
'
test_expect_success 'mergetool merges all from subdir' '
+ test_when_finished "git reset --hard" &&
+ git checkout -b test$test_count branch1 &&
test_config rerere.enabled false &&
(
cd subdir &&
@@ -190,6 +232,7 @@ test_expect_success 'mergetool merges all from subdir' '
'
test_expect_success 'mergetool skips resolved paths when rerere is active' '
+ test_when_finished "git reset --hard" &&
test_config rerere.enabled true &&
rm -rf .git/rr-cache &&
git checkout -b test$test_count branch1 &&
@@ -199,11 +242,11 @@ test_expect_success 'mergetool skips resolved paths when rerere is active' '
( yes "d" "d" | git mergetool --no-prompt >/dev/null 2>&1 ) &&
git submodule update -N &&
output="$(yes "n" | git mergetool --no-prompt)" &&
- test "$output" = "No files need merging" &&
- git reset --hard
+ test "$output" = "No files need merging"
'
test_expect_success 'conflicted stash sets up rerere' '
+ test_when_finished "git reset --hard" &&
test_config rerere.enabled true &&
git checkout stash1 &&
echo "Conflicting stash content" >file11 &&
@@ -231,7 +274,7 @@ test_expect_success 'conflicted stash sets up rerere' '
'
test_expect_success 'mergetool takes partial path' '
- git reset --hard &&
+ test_when_finished "git reset --hard" &&
test_config rerere.enabled false &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
@@ -239,26 +282,12 @@ test_expect_success 'mergetool takes partial path' '
( yes "" | git mergetool subdir ) &&
- test "$(cat subdir/file3)" = "master new sub" &&
- git reset --hard
+ test "$(cat subdir/file3)" = "master new sub"
'
test_expect_success 'mergetool delete/delete conflict' '
- git checkout -b delete-base branch1 &&
- mkdir -p a/a &&
- (echo one; echo two; echo 3; echo 4) >a/a/file.txt &&
- git add a/a/file.txt &&
- git commit -m"base file" &&
- git checkout -b move-to-b delete-base &&
- mkdir -p b/b &&
- git mv a/a/file.txt b/b/file.txt &&
- (echo one; echo two; echo 4) >b/b/file.txt &&
- git commit -a -m"move to b" &&
- git checkout -b move-to-c delete-base &&
- mkdir -p c/c &&
- git mv a/a/file.txt c/c/file.txt &&
- (echo one; echo two; echo 3) >c/c/file.txt &&
- git commit -a -m"move to c" &&
+ test_when_finished "git reset --hard" &&
+ git checkout -b test$test_count move-to-c &&
test_must_fail git merge move-to-b &&
echo d | git mergetool a/a/file.txt &&
! test -f a/a/file.txt &&
@@ -269,29 +298,32 @@ test_expect_success 'mergetool delete/delete conflict' '
git reset --hard HEAD &&
test_must_fail git merge move-to-b &&
! echo a | git mergetool a/a/file.txt &&
- ! test -f a/a/file.txt &&
- git reset --hard HEAD
+ ! test -f a/a/file.txt
'
test_expect_success 'mergetool produces no errors when keepBackup is used' '
+ test_when_finished "git reset --hard" &&
+ git checkout -b test$test_count move-to-c &&
test_config mergetool.keepBackup true &&
test_must_fail git merge move-to-b &&
: >expect &&
echo d | git mergetool a/a/file.txt 2>actual &&
test_cmp expect actual &&
- ! test -d a &&
- git reset --hard HEAD
+ ! test -d a
'
test_expect_success 'mergetool honors tempfile config for deleted files' '
+ test_when_finished "git reset --hard" &&
+ git checkout -b test$test_count move-to-c &&
test_config mergetool.keepTemporaries false &&
test_must_fail git merge move-to-b &&
echo d | git mergetool a/a/file.txt &&
- ! test -d a &&
- git reset --hard HEAD
+ ! test -d a
'
test_expect_success 'mergetool keeps tempfiles when aborting delete/delete' '
+ test_when_finished "git reset --hard; git clean -fdx" &&
+ git checkout -b test$test_count move-to-c &&
test_config mergetool.keepTemporaries true &&
test_must_fail git merge move-to-b &&
! (echo a; echo n) | git mergetool a/a/file.txt &&
@@ -302,12 +334,11 @@ test_expect_success 'mergetool keeps tempfiles when aborting delete/delete' '
file_REMOTE_.txt
EOF
ls -1 a/a | sed -e "s/[0-9]*//g" >actual &&
- test_cmp expect actual &&
- git clean -fdx &&
- git reset --hard HEAD
+ test_cmp expect actual
'
test_expect_success 'deleted vs modified submodule' '
+ test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
mv submod submod-movedaside &&
@@ -372,11 +403,11 @@ test_expect_success 'deleted vs modified submodule' '
test "$(cat submod/bar)" = "master submodule" &&
output="$(git mergetool --no-prompt)" &&
test "$output" = "No files need merging" &&
- git commit -m "Merge resolved by keeping module" &&
- git reset --hard HEAD
+ git commit -m "Merge resolved by keeping module"
'
test_expect_success 'file vs modified submodule' '
+ test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
mv submod submod-movedaside &&
@@ -448,6 +479,7 @@ test_expect_success 'file vs modified submodule' '
'
test_expect_success 'submodule in subdirectory' '
+ test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
(
@@ -509,6 +541,7 @@ test_expect_success 'submodule in subdirectory' '
'
test_expect_success 'directory vs modified submodule' '
+ test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
mv submod submod-movedaside &&
git rm --cached submod &&
@@ -559,34 +592,34 @@ test_expect_success 'directory vs modified submodule' '
'
test_expect_success 'file with no base' '
+ test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
test_must_fail git merge master &&
git mergetool --no-prompt --tool mybase -- both &&
>expected &&
- test_cmp both expected &&
- git reset --hard master >/dev/null 2>&1
+ test_cmp both expected
'
test_expect_success 'custom commands override built-ins' '
+ test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
test_config mergetool.defaults.cmd "cat \"\$REMOTE\" >\"\$MERGED\"" &&
test_config mergetool.defaults.trustExitCode true &&
test_must_fail git merge master &&
git mergetool --no-prompt --tool defaults -- both &&
echo master both added >expected &&
- test_cmp both expected &&
- git reset --hard master >/dev/null 2>&1
+ test_cmp both expected
'
test_expect_success 'filenames seen by tools start with ./' '
+ test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
test_config mergetool.writeToTemp false &&
test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" &&
test_config mergetool.myecho.trustExitCode true &&
test_must_fail git merge master &&
git mergetool --no-prompt --tool myecho -- both >actual &&
- grep ^\./both_LOCAL_ actual >/dev/null &&
- git reset --hard master >/dev/null 2>&1
+ grep ^\./both_LOCAL_ actual >/dev/null
'
test_lazy_prereq MKTEMP '
@@ -595,6 +628,7 @@ test_lazy_prereq MKTEMP '
'
test_expect_success MKTEMP 'temporary filenames are used with mergetool.writeToTemp' '
+ test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
test_config mergetool.writeToTemp true &&
test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" &&
@@ -602,31 +636,17 @@ test_expect_success MKTEMP 'temporary filenames are used with mergetool.writeToT
test_must_fail git merge master &&
git mergetool --no-prompt --tool myecho -- both >actual &&
test_must_fail grep ^\./both_LOCAL_ actual >/dev/null &&
- grep /both_LOCAL_ actual >/dev/null &&
- git reset --hard master >/dev/null 2>&1
+ grep /both_LOCAL_ actual >/dev/null
'
test_expect_success 'diff.orderFile configuration is honored' '
+ test_when_finished "git reset --hard" &&
+ git checkout -b test$test_count order-file-side2 &&
test_config diff.orderFile order-file &&
test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" &&
test_config mergetool.myecho.trustExitCode true &&
echo b >order-file &&
echo a >>order-file &&
- git checkout -b order-file-start master &&
- echo start >a &&
- echo start >b &&
- git add a b &&
- git commit -m start &&
- git checkout -b order-file-side1 order-file-start &&
- echo side1 >a &&
- echo side1 >b &&
- git add a b &&
- git commit -m side1 &&
- git checkout -b order-file-side2 order-file-start &&
- echo side2 >a &&
- echo side2 >b &&
- git add a b &&
- git commit -m side2 &&
test_must_fail git merge order-file-side1 &&
cat >expect <<-\EOF &&
Merging:
@@ -635,13 +655,16 @@ test_expect_success 'diff.orderFile configuration is honored' '
EOF
git mergetool --no-prompt --tool myecho >output &&
git grep --no-index -h -A2 Merging: output >actual &&
- test_cmp expect actual &&
- git reset --hard >/dev/null
+ test_cmp expect actual
'
test_expect_success 'mergetool -Oorder-file is honored' '
+ test_when_finished "git reset --hard" &&
+ git checkout -b test$test_count order-file-side2 &&
test_config diff.orderFile order-file &&
test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" &&
test_config mergetool.myecho.trustExitCode true &&
+ echo b >order-file &&
+ echo a >>order-file &&
test_must_fail git merge order-file-side1 &&
cat >expect <<-\EOF &&
Merging:
@@ -662,8 +685,7 @@ test_expect_success 'mergetool -Oorder-file is honored' '
EOF
git mergetool -Oorder-file --no-prompt --tool myecho >output &&
git grep --no-index -h -A2 Merging: output >actual &&
- test_cmp expect actual &&
- git reset --hard >/dev/null 2>&1
+ test_cmp expect actual
'
test_done
--
2.11.0.390.gc69c2f50cf-goog
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4845 bytes --]
next prev parent reply other threads:[~2017-01-06 1:11 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-04 0:50 [PATCH 0/4] fix mergetool+rerere+subdir regression Richard Hansen
2017-01-04 0:50 ` [PATCH 1/4] t7610: update branch names to match test number Richard Hansen
2017-01-04 0:50 ` [PATCH 2/4] t7610: make tests more independent and debuggable Richard Hansen
2017-01-04 20:27 ` Stefan Beller
2017-01-05 15:41 ` Richard Hansen
2017-01-05 15:46 ` Richard Hansen
2017-01-05 12:20 ` Simon Ruderich
2017-01-05 15:48 ` Richard Hansen
2017-01-04 0:50 ` [PATCH 3/4] t7610: add test case for rerere+mergetool+subdir bug Richard Hansen
2017-01-04 0:50 ` [PATCH 4/4] mergetool: fix running in subdir when rerere enabled Richard Hansen
2017-01-06 1:09 ` [PATCH v2 0/4] fix mergetool+rerere+subdir regression Richard Hansen
2017-01-06 1:09 ` [PATCH v2 1/4] t7610: update branch names to match test number Richard Hansen
2017-01-06 1:09 ` Richard Hansen [this message]
2017-01-06 1:31 ` [PATCH v2 2/4] t7610: make tests more independent and debuggable Stefan Beller
2017-01-07 1:53 ` Richard Hansen
2017-01-06 1:09 ` [PATCH v2 3/4] t7610: add test case for rerere+mergetool+subdir bug Richard Hansen
2017-01-06 1:09 ` [PATCH v2 4/4] mergetool: fix running in subdir when rerere enabled Richard Hansen
2017-01-06 9:42 ` Johannes Sixt
2017-01-07 2:16 ` Richard Hansen
2017-01-09 5:42 ` [PATCH v3 00/13] fix mergetool+rerere+subdir regression Richard Hansen
2017-01-09 5:42 ` [PATCH v3 01/13] .mailmap: Use my personal email address as my canonical Richard Hansen
2017-01-09 5:42 ` [PATCH v3 02/13] t7610: update branch names to match test number Richard Hansen
2017-01-09 5:42 ` [PATCH v3 03/13] t7610: Move setup code to the 'setup' test case Richard Hansen
2017-01-09 5:42 ` [PATCH v3 04/13] t7610: use test_when_finished for cleanup tasks Richard Hansen
2017-01-09 5:42 ` [PATCH v3 05/13] t7610: don't rely on state from previous test Richard Hansen
2017-01-09 5:42 ` [PATCH v3 06/13] t7610: run 'git reset --hard' after each test to clean up Richard Hansen
2017-01-09 5:42 ` [PATCH v3 07/13] t7610: delete some now-unnecessary 'git reset --hard' lines Richard Hansen
2017-01-09 5:42 ` [PATCH v3 08/13] t7610: always work on a test-specific branch Richard Hansen
2017-01-09 5:42 ` [PATCH v3 09/13] t7610: don't assume the checked-out commit Richard Hansen
2017-01-09 5:42 ` [PATCH v3 10/13] t7610: spell 'git reset --hard' consistently Richard Hansen
2017-01-09 5:42 ` [PATCH v3 11/13] t7610: add test case for rerere+mergetool+subdir bug Richard Hansen
2017-01-09 5:42 ` [PATCH v3 12/13] mergetool: take the "-O" out of $orderfile Richard Hansen
2017-01-09 5:42 ` [PATCH v3 13/13] mergetool: fix running in subdir when rerere enabled Richard Hansen
2017-01-09 18:12 ` Junio C Hamano
2017-01-09 19:05 ` Junio C Hamano
2017-01-09 19:53 ` Johannes Sixt
2017-01-09 22:57 ` Richard Hansen
2017-01-09 23:29 ` Junio C Hamano
2017-01-09 23:32 ` Junio C Hamano
2017-01-09 23:50 ` Richard Hansen
2017-01-09 18:49 ` [PATCH v3 00/13] fix mergetool+rerere+subdir regression Stefan Beller
2017-01-09 23:29 ` [PATCH v4 00/14] " Richard Hansen
2017-01-09 23:29 ` [PATCH v4 01/14] .mailmap: Use my personal email address as my canonical Richard Hansen
2017-01-09 23:29 ` [PATCH v4 02/14] rev-parse doc: use "--" in the --prefix example Richard Hansen
2017-01-09 23:29 ` [PATCH v4 03/14] t7610: update branch names to match test number Richard Hansen
2017-01-09 23:29 ` [PATCH v4 04/14] t7610: Move setup code to the 'setup' test case Richard Hansen
2017-01-09 23:29 ` [PATCH v4 05/14] t7610: use test_when_finished for cleanup tasks Richard Hansen
2017-01-09 23:29 ` [PATCH v4 06/14] t7610: don't rely on state from previous test Richard Hansen
2017-01-09 23:29 ` [PATCH v4 07/14] t7610: run 'git reset --hard' after each test to clean up Richard Hansen
2017-01-09 23:29 ` [PATCH v4 08/14] t7610: delete some now-unnecessary 'git reset --hard' lines Richard Hansen
2017-01-09 23:29 ` [PATCH v4 09/14] t7610: always work on a test-specific branch Richard Hansen
2017-01-09 23:29 ` [PATCH v4 10/14] t7610: don't assume the checked-out commit Richard Hansen
2017-01-09 23:29 ` [PATCH v4 11/14] t7610: spell 'git reset --hard' consistently Richard Hansen
2017-01-09 23:29 ` [PATCH v4 12/14] t7610: add test case for rerere+mergetool+subdir bug Richard Hansen
2017-01-09 23:29 ` [PATCH v4 13/14] mergetool: take the "-O" out of $orderfile Richard Hansen
2017-01-09 23:29 ` [PATCH v4 14/14] mergetool: fix running in subdir when rerere enabled Richard Hansen
2017-01-10 6:17 ` Johannes Sixt
2017-01-10 17:09 ` Richard Hansen
2017-01-10 19:25 ` Junio C Hamano
2017-01-10 20:29 ` Johannes Sixt
2017-01-10 20:41 ` [PATCH v5 00/14] fix mergetool+rerere+subdir regression Richard Hansen
2017-01-10 20:41 ` [PATCH v5 01/14] .mailmap: Use my personal email address as my canonical Richard Hansen
2017-01-10 20:41 ` [PATCH v5 02/14] rev-parse doc: pass "--" to rev-parse in the --prefix example Richard Hansen
2017-01-10 20:41 ` [PATCH v5 03/14] t7610: update branch names to match test number Richard Hansen
2017-01-10 20:41 ` [PATCH v5 04/14] t7610: Move setup code to the 'setup' test case Richard Hansen
2017-01-10 20:41 ` [PATCH v5 05/14] t7610: use test_when_finished for cleanup tasks Richard Hansen
2017-01-10 20:41 ` [PATCH v5 06/14] t7610: don't rely on state from previous test Richard Hansen
2017-01-10 20:41 ` [PATCH v5 07/14] t7610: run 'git reset --hard' after each test to clean up Richard Hansen
2017-01-10 20:41 ` [PATCH v5 08/14] t7610: delete some now-unnecessary 'git reset --hard' lines Richard Hansen
2017-01-10 20:41 ` [PATCH v5 09/14] t7610: always work on a test-specific branch Richard Hansen
2017-01-10 20:41 ` [PATCH v5 10/14] t7610: don't assume the checked-out commit Richard Hansen
2017-01-10 20:41 ` [PATCH v5 11/14] t7610: spell 'git reset --hard' consistently Richard Hansen
2017-01-10 20:42 ` [PATCH v5 12/14] t7610: add test case for rerere+mergetool+subdir bug Richard Hansen
2017-01-10 20:42 ` [PATCH v5 13/14] mergetool: take the "-O" out of $orderfile Richard Hansen
2017-01-10 20:42 ` [PATCH v5 14/14] mergetool: fix running in subdir when rerere enabled Richard Hansen
2017-01-10 4:36 ` [PATCH 0/4] fix mergetool+rerere+subdir regression David Aguilar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170106010945.79382-3-hansenr@google.com \
--to=hansenr@google.com \
--cc=davvid@gmail.com \
--cc=git@vger.kernel.org \
--cc=j6t@kdbg.org \
--cc=sbeller@google.com \
--cc=simon@ruderich.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.