From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Date: Tue, 10 Jan 2017 09:04:24 +0100 Subject: [U-Boot] [PATCH v2 7/7] ARM: sunxi: remove bare default for CONFIG_MMC In-Reply-To: <1484022728-9340-8-git-send-email-yamada.masahiro@socionext.com> References: <1484022728-9340-1-git-send-email-yamada.masahiro@socionext.com> <1484022728-9340-8-git-send-email-yamada.masahiro@socionext.com> Message-ID: <20170110080424.4k5cwxhdpjawkzl4@lukather> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, On Tue, Jan 10, 2017 at 01:32:08PM +0900, Masahiro Yamada wrote: > The bare default entry is wrong. Just remove it since the (real) > entry in drivers/mmc/Kconfig has "default ARM || PPC || SANDBOX". > > Signed-off-by: Masahiro Yamada > Reviewed-by: Marek Vasut > --- > > Changes in v2: None > > board/sunxi/Kconfig | 4 ---- > 1 file changed, 4 deletions(-) > > diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig > index e1d4ab1..11eb82a 100644 > --- a/board/sunxi/Kconfig > +++ b/board/sunxi/Kconfig > @@ -291,10 +291,6 @@ config OLD_SUNXI_KERNEL_COMPAT > Set this to enable various workarounds for old kernels, this results in > sub-optimal settings for newer kernels, only enable if needed. > > -config MMC > - depends on !UART0_PORT_F > - default y if ARCH_SUNXI > - The default might be useless, but the additional depends on is really not. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: