Re: [Fuego] RFC: Fuego's version up and other changes

[<Ibe.Kengo@bx.MitsubishiElectric.co.jp>]

Hi, Daniel-san

Thank you for your prompt reply.
I have more a few question.

> Humm You should not need to change any permissions.
OK.
I removed the Fuego and the Fuego-core,
after that, I redownloaded the Fuego and the Fuego-core and rebuilded
and start Docker.
I can see following permissions of directories. Is it correct?
==
melco@debian8:~/$ ./fuego/fuego-host-scripts/docker-start-container.sh
Starting Fuego container (fuego-container)
[ ok ] Starting Jenkins Continuous Integration Server: jenkins.

root@debian8:/# ls -al
total 84
drwxr-xr-x  65 root    root    4096 Jan 12 07:26 .
drwxr-xr-x  65 root    root    4096 Jan 12 07:26 ..
-rwxr-xr-x   1 root    root       0 Jan 12 07:26 .dockerenv
drwxr-xr-x   2 root    root    4096 Jan 12 00:53 bin
drwxr-xr-x   2 root    root    4096 Sep 12 04:09 boot
drwxr-xr-x   5 root    root     380 Jan 12 07:26 dev
drwxr-xr-x  96 root    root    4096 Jan 12 07:26 etc
drwxr-xr-x   4 jenkins jenkins 4096 Jan 12 07:07 fuego-core
drwxr-xr-x   5 jenkins jenkins 4096 Jan 12 07:03 fuego-ro
drwxr-xr-x   2 root    root    4096 Jan 12 07:26 fuego-rw
drwxr-xr-x   2 root    root    4096 Sep 12 04:09 home
~

melco@debian8:~/$ ls -al fuego
合計 68
drwxr-xr-x 8 melco melco 4096  1月 12 16:26 .
drwxr-xr-x 4 melco melco 4096  1月 12 16:02 ..
-rw-r--r-- 1 melco melco   42  1月 12 16:03 .dockerignore
drwxr-xr-x 8 melco melco 4096  1月 12 16:03 .git
-rw-r--r-- 1 melco melco    9  1月 12 16:03 .gitignore
-rw-r--r-- 1 melco melco 1482  1月 12 16:03 CHANGELOG
-rw-r--r-- 1 melco melco 4810  1月 12 16:03 Dockerfile
-rw-r--r-- 1 melco melco 1492  1月 12 16:03 LICENSE
-rw-r--r-- 1 melco melco 3414  1月 12 16:03 README
-rw-r--r-- 1 melco melco   85  1月 12 16:03 VERSION
drwxr-xr-x 3 melco melco 4096  1月 12 16:03 docs
drwxr-xr-x 3 melco melco 4096  1月 12 16:03 frontend-install
drwxr-xr-x 2 melco melco 4096  1月 12 16:03 fuego-host-scripts
drwxr-xr-x 5 melco melco 4096  1月 12 16:03 fuego-ro
drwxr-xr-x 2 root  root  4096  1月 12 16:26 fuego-rw
-rwxr-xr-x 1 melco melco   48  1月 12 16:03 install.sh

==
“melco” user is only user on host PC which is Debian8.
I’m concerned about fuego-rw permissions and owner.

> The script is supposed to use your user's uid/gid for the jenkins
daemon.
Do you mean that I need to make “Jenkins” user on host PC?
Or
Can I use “melco” user inside Docker?

> However, I have only tested it on my pc which has a single user.
> Do you have more than one user?
I have one user. I'v not made "jenkins" user on host PC.

I’ll check other point following your advice.
Thank you so much.
Kengo


----- Original Message -----
件名: RE: [Fuego] RFC: Fuego's version up and other changes
送信者: "Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp>
送信日時: 2017年01月12日(木) 15:44:34
宛先: Ibe.Kengo@bx.MitsubishiElectric.co.jp
Cc: fuego@lists.linuxfoundation.org

> Hi Kengo-san,
>
> Thanks a lot for your feedback.
>
> > -----Original Message-----
> > From: Ibe.Kengo@bx.MitsubishiElectric.co.jp [mailto:Ibe.Kengo@bx.
MitsubishiElectric.co.jp]
> > Sent: Thursday, January 12, 2017 2:52 PM
> > To: Daniel Sangorrin
> > Cc: fuego@lists.linuxfoundation.org
> > Subject: Re: [Fuego] RFC: Fuego's version up and other changes
> >
> > Hi, Daniel-san.
> >
> > I’m very interested in your work!
> > So I tried to run your build scripts to create Docker image today,
> > then I could run new Fuego.
> > And, I added Docker node and test cases to use following command.
> > ==
> >   $ git clone --branch next https://bitbucket.org/nirrognas/fuego.git

> >   $ git clone --branch next https://bitbucket.org/nirrognas/fuego-core.git

> >
> >   $ cd fuego/
> >   $ ./install.sh
> >   $ ./fuego-host-scripts/docker-create-container.sh
> >   $ ./fuego-host-scripts/docker-start-container.sh
> >   docker# fuego-create-node --board docker
> >   docker# fuego-create-jobs --board docker --testplan testplan_
docker
> > --distrib nosyslogd.dist
> > ==
> >
> > I can see  new node and new test jobs.
> > But, I can’t run tests like Dhrystone on Docker.
> >
> > So far, I had one small problem that is “Failed to mkdirs: /fuego-rw
/
> > buildzone”
> > This reason is the permission or owner of “fuego-rw”,
> > so I added the write permission to “fuego-rw” diredtory.
>
> Humm You should not need to change any permissions.
> The script is supposed to use your user's uid/gid for the jenkins
daemon.
> However, I have only tested it on my pc which has a single user.
> Do you have more than one user? Could you check that the jenkins uid/
gid
> is the same as yours? (you can check on /etc/passwd inside and outside
docker)
> Please also check that the fuego-rw's owner is your user (e.g.: don't
git clone with
> a different user or root)
>
> > I have solved this problem.
> >
> > After that, I got the error message like following in console log.
> > ====
> > Started by user anonymous
> > Building remotely on docker in workspace /fuego-rw/buildzone
> > [buildzone] $ /bin/sh -xe /tmp/hudson1255554151521556820.sh
> > + export Reboot=false
> > + Reboot=false
> > + export Rebuild=true
> > + Rebuild=true
> > + export Target_Cleanup=true
> > + Target_Cleanup=true
> > + export TESTDIR=Benchmark.Dhrystone
> > + TESTDIR=Benchmark.Dhrystone
> > + export TESTNAME=Dhrystone
> > + TESTNAME=Dhrystone
> > + export DISTRIB=nosyslogd.dist
> > + DISTRIB=nosyslogd.dist
> > + export TESTPLAN=testplan_docker
> > + TESTPLAN=testplan_docker
> > + timeout --signal=9 3m /bin/bash
> > /fuego-core/engine/tests/Benchmark.Dhrystone/Dhrystone.sh
> > board overlay: boards/docker.board
> > using boards/docker.board board overlay
> > using nosyslogd.dist overlay
> > BATCH_TESTPLAN is not set, using testplan_docker.json testplan
> > Traceback (most recent call last):
> >   File "/fuego-core/engine/scripts/ovgen/ovgen.py", line 615, in <
module
> > >
> >     run()
> >   File "/fuego-core/engine/scripts/ovgen/ovgen.py", line 607, in run
> >     generateProlog(output, ofcls, classes, testPlans, testSpecs)
> >   File "/fuego-core/engine/scripts/ovgen/ovgen.py", line 375, in
> > generateProlog
> >     outfile = open(outFilePath, "w")
> > IOError: [Errno 2] No such file or directory: '/fuego-rw/work/docker
_
> > prolog.sh'
> >
> > *** ABORTED ***
> >
> > Fuego error reason: Error while prolog.sh file generation
> >
> > Build step 'Execute shell' marked build as failure
> > [description-setter] Description set:
> > Finished: FAILURE
> > ====
> >
> > Did I miss to run test cases on Docker node?
> > If you know this solution, could you give me some advice?
>
> Could you check that fuego-rw is correctly mounted inside docker?
> outside-docker$ touch fuego-rw/hoge
> inside-docker$ ls /fuego-rw
> hoge <-- does it appear?
>
> On my PC (ubuntu 16.04, docker version 1.12.3 ) it's always succesful
so I will
> try on a different one. Which OS and docker version are you using?
>
> Thanks,
> Daniel
>
> > Thank you.
> >
> > Best Regard.
> > Kengo Ibe
> >
> > ----- Original Message -----
> > 件名: [Fuego] RFC: Fuego's version up and other changes
> > 送信者: "Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp>
> > 送信日時: 2017年01月11日(水) 09:28:07
> > 宛先: "Bird, Timothy" <Tim.Bird@am.sony.com>, fuego@lists.
> > linuxfoundation.org
> >
> > > Hi everyone,
> > >
> > > I've been working on Fuego's upgrade for a few weeks, and in the
> > process I
> > > have made quite a few changes.
> > > You can check it by following these instructions. I'd really
> > appreciate
> > > your feedback:
> > >
> > > Quickstart:
> > >   $ git clone --branch next https://bitbucket.org/nirrognas/fuego.git

> > >   $ git clone --branch next https://bitbucket.org/nirrognas/fuego-core.git

> >
> > >   $ cd fuego/
> > >   $ ./install.sh
> > >   $ ./fuego-host-scripts/docker-create-container.sh
> > >   $ ./fuego-host-scripts/docker-start-container.sh
> > >   docker# fuego-create-node --board docker
> > >   docker# fuego-create-jobs --board docker --testplan testplan_
docker
> > > --distrib nosyslogd.dist
> > >   Then, start the "docker.testplan_docker.batch" job which will
> > trigger
> > > the rest of jobs.
> > >
> > > Here is a list of the most fundamental modifications I've added:
> > > - I automatized the version upgrade process. So far I have updated
> > Jenkins
> > > 3 times quite smoothly.
> > >    The current version is the latest LTS version (2.31.1 LTS)
> > > - I reduced plugin dependencies to the minimum (only 2, and they
can
> > be
> > > made optional).
> > > - I removed dependencies on all groovy scripts.
> > > - Userdata is gone. Instead we now have fuego-ro and fuego-rw,
which
> > > together with fuego-core
> > >    are mounted as external docker volumes. Only fuego-rw, which
> > contains
> > > logs and build folders,
> > >    is mounted in RW mode. I also fixed the uid/gid of jenkins so
that
> > it
> > > matches the one in the host.
> > >    This means you can develop comfortably on your host, with GUI
tools,
> > > and don't fear a buggy
> > >    script deleting your folders.
> > > - I added a  tool for generating jobs from testplans.  Creating
jobs
> > from
> > > testplans is powerful.
> > >    It allows you, for example, to easily specify the timeout for
each
> > test
> > > on your board.
> > >    The tool also generates the corresponding batch job. For
example,
> > you
> > > can easily trigger all
> > >    tests for your board and a specific testplan periodically.
> > >    [Note] This will also enable the creation of scripts for
comparing
> > test
> > > results across
> > >    different boards and test parameters (on my TODO list).
> > >
> > > Other less fundamental changes include:
> > > - I added support for using the docker container itself as a
target
> > board
> > > (e.g.: for a quickstart or unit tests)
> > > - I fixed the flot plugin (java and javascript fixes)
> > > - Now you can click on a node and see which jobs (and testplans)
are
> > > assigned to your board. This was
> > >   one of my old feature requests and makes Fuego's GUI easier to
use.
> > > - I added quite a few fixes and improvements to the core engine
> > scripts
> > > and tests (too detailed to describe here).
> > > - I added Excel output support for IOzone
> > > - Faster docker build time (ARMhf compiler installation is now
> > optional,
> > > no latex..)
> > > - I put a fixed name to the fuego container, instead of the
> > > "last_container_id" file.
> > > - I removed the inotify script
> > > - I added scripts for easily removing the docker container/image.
> > >
> > > I have to split the current "huge" patch into smaller chunks and
test
> > it
> > > further but it would
> > > be nice to get your feedback about the approach in general.
> > >
> > > Tim: I haven't updated ftc nor your "Christmas commits" yet.
> > >
> > > Best regards
> > > Daniel
> > >
> > >
> > > _______________________________________________
> > > Fuego mailing list
> > > Fuego@lists.linuxfoundation.org
> > > https://lists.linuxfoundation.org/mailman/listinfo/fuego
> > >
> >
>
>
>
>