From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Date: Mon, 16 Jan 2017 08:46:55 +0100 Subject: [U-Boot] [PATCH 04/12] sunxi: Kconfig: introduce CONFIG_SUNXI_HIGH_SRAM In-Reply-To: <1484271004-19681-5-git-send-email-andre.przywara@arm.com> References: <1484271004-19681-1-git-send-email-andre.przywara@arm.com> <1484271004-19681-5-git-send-email-andre.przywara@arm.com> Message-ID: <20170116074655.x5iriqznneu4hpsl@lukather> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Jan 13, 2017 at 01:29:56AM +0000, Andre Przywara wrote: > Traditionally Allwinner SoCs have their boot ROM mapped just below 4GB, > while the first SRAM region is mapped at address 0. > With the extended physical memory support of the A80 this was changed, > so the BROM is now at address 0 and the SRAM region starts right behind > this at 64KB. This configuration seems to be called "high SRAM". > Instead of enumerating the SoCs which have copied this configuration, > let's call a spade a spade and introduce a Kconfig option for this setup. > SoCs implementing this (A80, A64 and H5, so far), can then select this > configuration. > Simplify the config header definition on the way. > > Signed-off-by: Andre Przywara Acked-by: Maxime Ripard Thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: