From mboxrd@z Thu Jan 1 00:00:00 1970 From: fu.wei@linaro.org Subject: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. Date: Wed, 18 Jan 2017 21:25:32 +0800 Message-ID: <20170118132541.8989-9-fu.wei@linaro.org> References: <20170118132541.8989-1-fu.wei@linaro.org> Return-path: In-Reply-To: <20170118132541.8989-1-fu.wei@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: rjw@rjwysocki.net, lenb@kernel.org, daniel.lezcano@linaro.org, tglx@linutronix.de, marc.zyngier@arm.com, mark.rutland@arm.com, lorenzo.pieralisi@arm.com, sudeep.holla@arm.com, hanjun.guo@linaro.org Cc: linux-arm-kernel@lists.infradead.org, linaro-acpi@lists.linaro.org, linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org, rruigrok@codeaurora.org, harba@codeaurora.org, cov@codeaurora.org, timur@codeaurora.org, graeme.gregory@linaro.org, al.stone@linaro.org, jcm@redhat.com, wei@redhat.com, arnd@arndb.de, catalin.marinas@arm.com, will.deacon@arm.com, Suravee.Suthikulpanit@amd.com, leo.duran@amd.com, wim@iguana.be, linux@roeck-us.net, linux-watchdog@vger.kernel.org, tn@semihalf.com, christoffer.dall@linaro.org, julien.grall@arm.com, Fu Wei List-Id: linux-acpi@vger.kernel.org From: Fu Wei The counter frequency detection call(arch_timer_detect_rate) combines two ways to get counter frequency: system coprocessor register and MMIO timer. But in a specific timer init code, we only need one way to try: getting frequency from MMIO timer register will be needed only when we init MMIO timer; getting frequency from system coprocessor register will be needed only when we init arch timer. This patch separates paths to determine frequency: Separate out the MMIO frequency and the sysreg frequency detection call, and use the appropriate one for the counter. Signed-off-by: Fu Wei --- drivers/clocksource/arm_arch_timer.c | 40 ++++++++++++++++++++++-------------- 1 file changed, 25 insertions(+), 15 deletions(-) diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 6484f84..9482481 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -488,23 +488,33 @@ static int arch_timer_starting_cpu(unsigned int cpu) return 0; } -static void arch_timer_detect_rate(void __iomem *cntbase) +static void __arch_timer_determine_rate(u32 rate) { - /* Who has more than one independent system counter? */ - if (arch_timer_rate) - return; + /* Check the timer frequency. */ + if (!arch_timer_rate) { + if (rate) + arch_timer_rate = rate; + else + pr_warn("frequency not available\n"); + } else if (rate && arch_timer_rate != rate) { + pr_warn("got different frequency, keep original.\n"); + } +} +static void arch_timer_detect_rate(void) +{ /* - * Try to determine the frequency from the MMIO timer or the sysreg. + * Try to get the timer frequency from the sysreg CNTFRQ. */ - if (cntbase) - arch_timer_rate = readl_relaxed(cntbase + CNTFRQ); - else - arch_timer_rate = arch_timer_get_cntfrq(); + __arch_timer_determine_rate(arch_timer_get_cntfrq()); +} - /* Check the timer frequency. */ - if (arch_timer_rate == 0) - pr_warn("frequency not available\n"); +static void arch_timer_mem_detect_rate(void __iomem *cntbase) +{ + /* + * Try to get the timer frequency from the CNTFRQ reg of MMIO timer. + */ + __arch_timer_determine_rate(readl_relaxed(cntbase + CNTFRQ)); } static void arch_timer_banner(unsigned type) @@ -887,7 +897,7 @@ static int __init arch_timer_of_init(struct device_node *np) */ if (!arch_timer_rate && of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) - arch_timer_detect_rate(NULL); + arch_timer_detect_rate(); arch_timer_c3stop = !of_property_read_bool(np, "always-on"); @@ -1001,7 +1011,7 @@ static int __init arch_timer_mem_init(struct device_node *np) */ if (!arch_timer_rate && of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) - arch_timer_detect_rate(base); + arch_timer_mem_detect_rate(base); ret = arch_timer_mem_register(base, irq); if (ret) @@ -1064,7 +1074,7 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table) gtdt->non_secure_el2_flags); /* Get the frequency from the sysreg CNTFRQ */ - arch_timer_detect_rate(NULL); + arch_timer_detect_rate(); arch_timer_uses_ppi = arch_timer_select_ppi(); if (!arch_timer_ppi[arch_timer_uses_ppi]) { -- 2.9.3 From mboxrd@z Thu Jan 1 00:00:00 1970 From: fu.wei@linaro.org (fu.wei at linaro.org) Date: Wed, 18 Jan 2017 21:25:32 +0800 Subject: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. In-Reply-To: <20170118132541.8989-1-fu.wei@linaro.org> References: <20170118132541.8989-1-fu.wei@linaro.org> Message-ID: <20170118132541.8989-9-fu.wei@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Fu Wei The counter frequency detection call(arch_timer_detect_rate) combines two ways to get counter frequency: system coprocessor register and MMIO timer. But in a specific timer init code, we only need one way to try: getting frequency from MMIO timer register will be needed only when we init MMIO timer; getting frequency from system coprocessor register will be needed only when we init arch timer. This patch separates paths to determine frequency: Separate out the MMIO frequency and the sysreg frequency detection call, and use the appropriate one for the counter. Signed-off-by: Fu Wei --- drivers/clocksource/arm_arch_timer.c | 40 ++++++++++++++++++++++-------------- 1 file changed, 25 insertions(+), 15 deletions(-) diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 6484f84..9482481 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -488,23 +488,33 @@ static int arch_timer_starting_cpu(unsigned int cpu) return 0; } -static void arch_timer_detect_rate(void __iomem *cntbase) +static void __arch_timer_determine_rate(u32 rate) { - /* Who has more than one independent system counter? */ - if (arch_timer_rate) - return; + /* Check the timer frequency. */ + if (!arch_timer_rate) { + if (rate) + arch_timer_rate = rate; + else + pr_warn("frequency not available\n"); + } else if (rate && arch_timer_rate != rate) { + pr_warn("got different frequency, keep original.\n"); + } +} +static void arch_timer_detect_rate(void) +{ /* - * Try to determine the frequency from the MMIO timer or the sysreg. + * Try to get the timer frequency from the sysreg CNTFRQ. */ - if (cntbase) - arch_timer_rate = readl_relaxed(cntbase + CNTFRQ); - else - arch_timer_rate = arch_timer_get_cntfrq(); + __arch_timer_determine_rate(arch_timer_get_cntfrq()); +} - /* Check the timer frequency. */ - if (arch_timer_rate == 0) - pr_warn("frequency not available\n"); +static void arch_timer_mem_detect_rate(void __iomem *cntbase) +{ + /* + * Try to get the timer frequency from the CNTFRQ reg of MMIO timer. + */ + __arch_timer_determine_rate(readl_relaxed(cntbase + CNTFRQ)); } static void arch_timer_banner(unsigned type) @@ -887,7 +897,7 @@ static int __init arch_timer_of_init(struct device_node *np) */ if (!arch_timer_rate && of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) - arch_timer_detect_rate(NULL); + arch_timer_detect_rate(); arch_timer_c3stop = !of_property_read_bool(np, "always-on"); @@ -1001,7 +1011,7 @@ static int __init arch_timer_mem_init(struct device_node *np) */ if (!arch_timer_rate && of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) - arch_timer_detect_rate(base); + arch_timer_mem_detect_rate(base); ret = arch_timer_mem_register(base, irq); if (ret) @@ -1064,7 +1074,7 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table) gtdt->non_secure_el2_flags); /* Get the frequency from the sysreg CNTFRQ */ - arch_timer_detect_rate(NULL); + arch_timer_detect_rate(); arch_timer_uses_ppi = arch_timer_select_ppi(); if (!arch_timer_ppi[arch_timer_uses_ppi]) { -- 2.9.3