* [PATCH 00/16 v2] x86/microcode: 4.11 queue
@ 2017-01-20 20:29 Borislav Petkov
2017-01-20 20:29 ` [PATCH 01/16] x86/microcode/intel: Drop stashed AP patch pointer optimization Borislav Petkov
` (15 more replies)
0 siblings, 16 replies; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
Hi,
here's v2 incorporating all feedback from tglx. As a result, the final
version has gotten even cleaner. To the point that I might even start
sharing code between the Intel and AMD side. We'll see how ugly it gets.
Btw, 1/16 needs to go to tip/x86/urgent as it is another fix for the
loading rework that went in in 4.10.
Please queue the rest for 4.11.
Thanks.
Changelog:
v1:
so this is more of a lessons-learned pile after the rewriting of the
whole patch loading method and not caching addresses. It largely
simplifies the loader - just look at the diffstat - without any
functionality loss (I hope :-)). The driver is also very much readable
now with unified, common paths where possible.
What is more, 6/13 reworks the whole AMD container parsing into much
more readable separation of functionality and functions doing only one
thing properly.
13/13 is also another nice simplification for the AP update path which
looks almost straightforward in comparison with what we had before.
All has been tested on a lot of boxes and in different configurations:
* builtin vs initrd microcode
* old microcode_ctl application method for Intel
* "echo 1 > /sys/devices/system/cpu/microcode/reload" late method
* CONFIG_RANDOMIZE_MEMORY
both on Intel and AMD machines.
Borislav Petkov (16):
x86/microcode/intel: Drop stashed AP patch pointer optimization
x86/MSR: Carve out bare minimum accessors
x86/microcode: Convert to bare minimum MSR accessors
x86/microcode/AMD: Clean up find_equiv_id()
x86/microcode/AMD: Shorten function parameter's name
x86/microcode/AMD: Extend the container struct
x86/microcode/AMD: Rework container parsing
x86/microcode: Decrease CPUID use
x86/microcode/AMD: Get rid of global this_equiv_id
x86/microcode/AMD: Use find_microcode_in_initrd()
x86/microcode: Remove local vendor variable
x86/microcode/AMD: Check patch level only on the BSP
x86/microcode/AMD: Unify load_ucode_amd_ap()
x86/microcode/AMD: Simplify saving from initrd
x86/microcode/AMD: Remove AP scanning optimization
x86/microcode/AMD: Remove struct cont_desc.eq_id
arch/x86/include/asm/apic.h | 2 +-
arch/x86/include/asm/microcode.h | 9 +-
arch/x86/include/asm/microcode_amd.h | 2 -
arch/x86/include/asm/msr.h | 51 ++--
arch/x86/kernel/cpu/microcode/amd.c | 500 +++++++++++-----------------------
arch/x86/kernel/cpu/microcode/core.c | 81 ++++--
arch/x86/kernel/cpu/microcode/intel.c | 9 +-
7 files changed, 250 insertions(+), 404 deletions(-)
--
2.11.0
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH 01/16] x86/microcode/intel: Drop stashed AP patch pointer optimization
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:07 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 02/16] x86/MSR: Carve out bare minimum accessors Borislav Petkov
` (14 subsequent siblings)
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
This was meant to save us the scanning of the microcode containter in
the initrd since the first AP had already done that but it can also hurt
us:
Imagine a single hyperthreaded CPU (Intel(R) Atom(TM) CPU N270, for
example) which updates the microcode on the BSP but since the microcode
engine is shared between the two threads, the update on CPU1 doesn't
happen because it has already happened on CPU0 and we don't find a newer
microcode revision on CPU1.
Which doesn't set the intel_ucode_patch pointer and at initrd
jettisoning time we don't save the microcode patch for later
application.
Now, when we suspend to RAM, the loaded microcode gets cleared so we
need to reload but there's no patch saved in the cache.
Removing the optimization fixes this issue and all is fine and dandy.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: 06b8534cb728 ("x86/microcode: Rework microcode loading")
---
arch/x86/kernel/cpu/microcode/intel.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c
index 3f329b74e040..8325d8a09ab0 100644
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -41,7 +41,7 @@
static const char ucode_path[] = "kernel/x86/microcode/GenuineIntel.bin";
-/* Current microcode patch used in early patching */
+/* Current microcode patch used in early patching on the APs. */
struct microcode_intel *intel_ucode_patch;
static inline bool cpu_signatures_match(unsigned int s1, unsigned int p1,
@@ -607,12 +607,6 @@ int __init save_microcode_in_initrd_intel(void)
struct ucode_cpu_info uci;
struct cpio_data cp;
- /*
- * AP loading didn't find any microcode patch, no need to save anything.
- */
- if (!intel_ucode_patch || IS_ERR(intel_ucode_patch))
- return 0;
-
if (!load_builtin_intel_microcode(&cp))
cp = find_microcode_in_initrd(ucode_path, false);
@@ -628,7 +622,6 @@ int __init save_microcode_in_initrd_intel(void)
return 0;
}
-
/*
* @res_patch, output: a pointer to the patch we found.
*/
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 02/16] x86/MSR: Carve out bare minimum accessors
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
2017-01-20 20:29 ` [PATCH 01/16] x86/microcode/intel: Drop stashed AP patch pointer optimization Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:07 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 03/16] x86/microcode: Convert to bare minimum MSR accessors Borislav Petkov
` (13 subsequent siblings)
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
Add __rdmsr() and __wrmsr() which *only* read and write an MSR with
exception handling. Those are going to be used in early code, like the
microcode loader, which cannot stomach tracing code piggybacking on the
MSR operation.
While at it, get rid of __native_write_msr_notrace().
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/include/asm/apic.h | 2 +-
arch/x86/include/asm/msr.h | 51 +++++++++++++++++++++++++++------------------
2 files changed, 32 insertions(+), 21 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 0c5fbc68e82d..eff8e36aaf72 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -195,7 +195,7 @@ static inline void native_apic_msr_write(u32 reg, u32 v)
static inline void native_apic_msr_eoi_write(u32 reg, u32 v)
{
- wrmsr_notrace(APIC_BASE_MSR + (APIC_EOI >> 4), APIC_EOI_ACK, 0);
+ __wrmsr(APIC_BASE_MSR + (APIC_EOI >> 4), APIC_EOI_ACK, 0);
}
static inline u32 native_apic_msr_read(u32 reg)
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index db0b90c3b03e..898dba2e2e2c 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -80,7 +80,14 @@ static inline void do_trace_read_msr(unsigned int msr, u64 val, int failed) {}
static inline void do_trace_rdpmc(unsigned int msr, u64 val, int failed) {}
#endif
-static inline unsigned long long native_read_msr(unsigned int msr)
+/*
+ * __rdmsr() and __wrmsr() are the two primitives which are the bare minimum MSR
+ * accessors and should not have any tracing or other functionality piggybacking
+ * on them - those are *purely* for accessing MSRs and nothing more. So don't even
+ * think of extending them - you will be slapped with a stinking trout or a frozen
+ * shark will reach you, wherever you are! You've been warned.
+ */
+static inline unsigned long long notrace __rdmsr(unsigned int msr)
{
DECLARE_ARGS(val, low, high);
@@ -88,11 +95,30 @@ static inline unsigned long long native_read_msr(unsigned int msr)
"2:\n"
_ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_rdmsr_unsafe)
: EAX_EDX_RET(val, low, high) : "c" (msr));
- if (msr_tracepoint_active(__tracepoint_read_msr))
- do_trace_read_msr(msr, EAX_EDX_VAL(val, low, high), 0);
+
return EAX_EDX_VAL(val, low, high);
}
+static inline void notrace __wrmsr(unsigned int msr, u32 low, u32 high)
+{
+ asm volatile("1: wrmsr\n"
+ "2:\n"
+ _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_wrmsr_unsafe)
+ : : "c" (msr), "a"(low), "d" (high) : "memory");
+}
+
+static inline unsigned long long native_read_msr(unsigned int msr)
+{
+ unsigned long long val;
+
+ val = __rdmsr(msr);
+
+ if (msr_tracepoint_active(__tracepoint_read_msr))
+ do_trace_read_msr(msr, val, 0);
+
+ return val;
+}
+
static inline unsigned long long native_read_msr_safe(unsigned int msr,
int *err)
{
@@ -116,29 +142,14 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr,
/* Can be uninlined because referenced by paravirt */
static inline void notrace
-__native_write_msr_notrace(unsigned int msr, u32 low, u32 high)
-{
- asm volatile("1: wrmsr\n"
- "2:\n"
- _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_wrmsr_unsafe)
- : : "c" (msr), "a"(low), "d" (high) : "memory");
-}
-
-/* Can be uninlined because referenced by paravirt */
-static inline void notrace
native_write_msr(unsigned int msr, u32 low, u32 high)
{
- __native_write_msr_notrace(msr, low, high);
+ __wrmsr(msr, low, high);
+
if (msr_tracepoint_active(__tracepoint_write_msr))
do_trace_write_msr(msr, ((u64)high << 32 | low), 0);
}
-static inline void
-wrmsr_notrace(unsigned int msr, u32 low, u32 high)
-{
- __native_write_msr_notrace(msr, low, high);
-}
-
/* Can be uninlined because referenced by paravirt */
static inline int notrace
native_write_msr_safe(unsigned int msr, u32 low, u32 high)
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 03/16] x86/microcode: Convert to bare minimum MSR accessors
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
2017-01-20 20:29 ` [PATCH 01/16] x86/microcode/intel: Drop stashed AP patch pointer optimization Borislav Petkov
2017-01-20 20:29 ` [PATCH 02/16] x86/MSR: Carve out bare minimum accessors Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:08 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 04/16] x86/microcode/AMD: Clean up find_equiv_id() Borislav Petkov
` (12 subsequent siblings)
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
Having tracepoints to the MSR accessors makes them unsuitable for early
microcode loading: think 32-bit before paging is enabled and us chasing
pointers to test whether a tracepoint is enabled or not. Results in a
reliable triple fault.
Convert to the bare ones.
Signed-off-by: Borislav Petkov <bp@suse.de>
---
arch/x86/include/asm/microcode.h | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 38711df3bcb5..90b22bbdfce9 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -7,18 +7,17 @@
#define native_rdmsr(msr, val1, val2) \
do { \
- u64 __val = native_read_msr((msr)); \
+ u64 __val = __rdmsr((msr)); \
(void)((val1) = (u32)__val); \
(void)((val2) = (u32)(__val >> 32)); \
} while (0)
#define native_wrmsr(msr, low, high) \
- native_write_msr(msr, low, high)
+ __wrmsr(msr, low, high)
#define native_wrmsrl(msr, val) \
- native_write_msr((msr), \
- (u32)((u64)(val)), \
- (u32)((u64)(val) >> 32))
+ __wrmsr((msr), (u32)((u64)(val)), \
+ (u32)((u64)(val) >> 32))
struct ucode_patch {
struct list_head plist;
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 04/16] x86/microcode/AMD: Clean up find_equiv_id()
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
` (2 preceding siblings ...)
2017-01-20 20:29 ` [PATCH 03/16] x86/microcode: Convert to bare minimum MSR accessors Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:08 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 05/16] x86/microcode/AMD: Shorten function parameter's name Borislav Petkov
` (11 subsequent siblings)
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
No need to have it marked "inline" - let gcc decide. Also, shorten the
argument name and simplify while-test.
While at it, make it into a proper for-loop and simplify it even more,
as tglx suggests.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 6a31e2691f3a..5c1509a38048 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -97,20 +97,13 @@ static size_t compute_container_size(u8 *data, u32 total_size)
return size;
}
-static inline u16 find_equiv_id(struct equiv_cpu_entry *equiv_cpu_table,
- unsigned int sig)
+static u16 find_equiv_id(struct equiv_cpu_entry *equiv_table, u32 sig)
{
- int i = 0;
-
- if (!equiv_cpu_table)
- return 0;
-
- while (equiv_cpu_table[i].installed_cpu != 0) {
- if (sig == equiv_cpu_table[i].installed_cpu)
- return equiv_cpu_table[i].equiv_cpu;
-
- i++;
+ for (; equiv_table && equiv_table->installed_cpu; equiv_table++) {
+ if (sig == equiv_table->installed_cpu)
+ return equiv_table->equiv_cpu;
}
+
return 0;
}
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 05/16] x86/microcode/AMD: Shorten function parameter's name
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
` (3 preceding siblings ...)
2017-01-20 20:29 ` [PATCH 04/16] x86/microcode/AMD: Clean up find_equiv_id() Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:09 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 06/16] x86/microcode/AMD: Extend the container struct Borislav Petkov
` (10 subsequent siblings)
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
The whole driver calls this "mc", do that here too.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 5c1509a38048..1691f41fcfdb 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -187,15 +187,15 @@ find_proper_container(u8 *ucode, size_t size, struct container *ret_cont)
return eq_id;
}
-static int __apply_microcode_amd(struct microcode_amd *mc_amd)
+static int __apply_microcode_amd(struct microcode_amd *mc)
{
u32 rev, dummy;
- native_wrmsrl(MSR_AMD64_PATCH_LOADER, (u64)(long)&mc_amd->hdr.data_code);
+ native_wrmsrl(MSR_AMD64_PATCH_LOADER, (u64)(long)&mc->hdr.data_code);
/* verify patch application was successful */
native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
- if (rev != mc_amd->hdr.patch_id)
+ if (rev != mc->hdr.patch_id)
return -1;
return 0;
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 06/16] x86/microcode/AMD: Extend the container struct
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
` (4 preceding siblings ...)
2017-01-20 20:29 ` [PATCH 05/16] x86/microcode/AMD: Shorten function parameter's name Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:09 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 07/16] x86/microcode/AMD: Rework container parsing Borislav Petkov
` (9 subsequent siblings)
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
Make it into a container descriptor which is being passed around and
stores important info like the matching container and the patch for the
current CPU. Make it static too.
Later patches will use this and thus get rid of a double container
parsing.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 26 +++++++++++++++-----------
1 file changed, 15 insertions(+), 11 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 1691f41fcfdb..4e2238345308 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -42,11 +42,15 @@ static struct equiv_cpu_entry *equiv_cpu_table;
/*
* This points to the current valid container of microcode patches which we will
- * save from the initrd/builtin before jettisoning its contents.
+ * save from the initrd/builtin before jettisoning its contents. @mc is the
+ * microcode patch we found to match.
*/
-struct container {
- u8 *data;
- size_t size;
+static struct cont_desc {
+ struct microcode_amd *mc;
+ u32 psize;
+ u16 eq_id;
+ u8 *data;
+ size_t size;
} cont;
static u32 ucode_new_rev;
@@ -113,9 +117,9 @@ static u16 find_equiv_id(struct equiv_cpu_entry *equiv_table, u32 sig)
* table or 0 if none found.
*/
static u16
-find_proper_container(u8 *ucode, size_t size, struct container *ret_cont)
+find_proper_container(u8 *ucode, size_t size, struct cont_desc *desc)
{
- struct container ret = { NULL, 0 };
+ struct cont_desc ret = { 0 };
u32 eax, ebx, ecx, edx;
struct equiv_cpu_entry *eq;
int offset, left;
@@ -158,7 +162,7 @@ find_proper_container(u8 *ucode, size_t size, struct container *ret_cont)
*/
left = ret.size - offset;
- *ret_cont = ret;
+ *desc = ret;
return eq_id;
}
@@ -213,11 +217,11 @@ static int __apply_microcode_amd(struct microcode_amd *mc)
* Returns true if container found (sets @ret_cont), false otherwise.
*/
static bool apply_microcode_early_amd(void *ucode, size_t size, bool save_patch,
- struct container *ret_cont)
+ struct cont_desc *desc)
{
u8 (*patch)[PATCH_MAX_SIZE];
u32 rev, *header, *new_rev;
- struct container ret;
+ struct cont_desc ret;
int offset, left;
u16 eq_id = 0;
u8 *data;
@@ -270,8 +274,8 @@ static bool apply_microcode_early_amd(void *ucode, size_t size, bool save_patch,
left -= offset;
}
- if (ret_cont)
- *ret_cont = ret;
+ if (desc)
+ *desc = ret;
return true;
}
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 07/16] x86/microcode/AMD: Rework container parsing
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
` (5 preceding siblings ...)
2017-01-20 20:29 ` [PATCH 06/16] x86/microcode/AMD: Extend the container struct Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:10 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 08/16] x86/microcode: Decrease CPUID use Borislav Petkov
` (8 subsequent siblings)
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
It was pretty clumsy before and the whole work of parsing the microcode
containers was spread around the functions wrongly.
Clean it up so that there's a main scan_containers() function which
iterates over the microcode blob and picks apart the containers glued
together. For each container, it calls a parse_container() helper which
concentrates on one container only: sanity-checking, parsing, counting
microcode patches in there, etc.
It makes much more sense now and it is actually very readable. Oh, and
we luvz a diffstat removing more crap than adding.
Signed-off-by: Borislav Petkov <bp@suse.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 238 ++++++++++++++++--------------------
1 file changed, 105 insertions(+), 133 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 4e2238345308..9d5f4f3626f7 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -64,43 +64,6 @@ static u16 this_equiv_id;
static const char
ucode_path[] __maybe_unused = "kernel/x86/microcode/AuthenticAMD.bin";
-static size_t compute_container_size(u8 *data, u32 total_size)
-{
- size_t size = 0;
- u32 *header = (u32 *)data;
-
- if (header[0] != UCODE_MAGIC ||
- header[1] != UCODE_EQUIV_CPU_TABLE_TYPE || /* type */
- header[2] == 0) /* size */
- return size;
-
- size = header[2] + CONTAINER_HDR_SZ;
- total_size -= size;
- data += size;
-
- while (total_size) {
- u16 patch_size;
-
- header = (u32 *)data;
-
- if (header[0] != UCODE_UCODE_TYPE)
- break;
-
- /*
- * Sanity-check patch size.
- */
- patch_size = header[1];
- if (patch_size > PATCH_MAX_SIZE)
- break;
-
- size += patch_size + SECTION_HDR_SIZE;
- data += patch_size + SECTION_HDR_SIZE;
- total_size -= patch_size + SECTION_HDR_SIZE;
- }
-
- return size;
-}
-
static u16 find_equiv_id(struct equiv_cpu_entry *equiv_table, u32 sig)
{
for (; equiv_table && equiv_table->installed_cpu; equiv_table++) {
@@ -115,80 +78,106 @@ static u16 find_equiv_id(struct equiv_cpu_entry *equiv_table, u32 sig)
* This scans the ucode blob for the proper container as we can have multiple
* containers glued together. Returns the equivalence ID from the equivalence
* table or 0 if none found.
+ * Returns the amount of bytes consumed while scanning. @desc contains all the
+ * data we're going to use in later stages of the application.
*/
-static u16
-find_proper_container(u8 *ucode, size_t size, struct cont_desc *desc)
+static ssize_t parse_container(u8 *ucode, ssize_t size, struct cont_desc *desc)
{
- struct cont_desc ret = { 0 };
- u32 eax, ebx, ecx, edx;
struct equiv_cpu_entry *eq;
- int offset, left;
- u16 eq_id = 0;
- u32 *header;
- u8 *data;
+ ssize_t orig_size = size;
+ u32 *hdr = (u32 *)ucode;
+ u32 eax, ebx, ecx, edx;
+ u16 eq_id;
+ u8 *buf;
- data = ucode;
- left = size;
- header = (u32 *)data;
+ /* Am I looking at an equivalence table header? */
+ if (hdr[0] != UCODE_MAGIC ||
+ hdr[1] != UCODE_EQUIV_CPU_TABLE_TYPE ||
+ hdr[2] == 0) {
+ desc->eq_id = 0;
+ return CONTAINER_HDR_SZ;
+ }
+ buf = ucode;
- /* find equiv cpu table */
- if (header[0] != UCODE_MAGIC ||
- header[1] != UCODE_EQUIV_CPU_TABLE_TYPE || /* type */
- header[2] == 0) /* size */
- return eq_id;
+ eq = (struct equiv_cpu_entry *)(buf + CONTAINER_HDR_SZ);
- eax = 0x00000001;
+ eax = 1;
ecx = 0;
native_cpuid(&eax, &ebx, &ecx, &edx);
- while (left > 0) {
- eq = (struct equiv_cpu_entry *)(data + CONTAINER_HDR_SZ);
-
- ret.data = data;
+ /* Find the equivalence ID of our CPU in this table: */
+ eq_id = find_equiv_id(eq, eax);
- /* Advance past the container header */
- offset = header[2] + CONTAINER_HDR_SZ;
- data += offset;
- left -= offset;
+ buf += hdr[2] + CONTAINER_HDR_SZ;
+ size -= hdr[2] + CONTAINER_HDR_SZ;
- eq_id = find_equiv_id(eq, eax);
- if (eq_id) {
- ret.size = compute_container_size(ret.data, left + offset);
+ /*
+ * Scan through the rest of the container to find where it ends. We do
+ * some basic sanity-checking too.
+ */
+ while (size > 0) {
+ struct microcode_amd *mc;
+ u32 patch_size;
- /*
- * truncate how much we need to iterate over in the
- * ucode update loop below
- */
- left = ret.size - offset;
+ hdr = (u32 *)buf;
- *desc = ret;
- return eq_id;
- }
+ if (hdr[0] != UCODE_UCODE_TYPE)
+ break;
- /*
- * support multiple container files appended together. if this
- * one does not have a matching equivalent cpu entry, we fast
- * forward to the next container file.
- */
- while (left > 0) {
- header = (u32 *)data;
+ /* Sanity-check patch size. */
+ patch_size = hdr[1];
+ if (patch_size > PATCH_MAX_SIZE)
+ break;
- if (header[0] == UCODE_MAGIC &&
- header[1] == UCODE_EQUIV_CPU_TABLE_TYPE)
- break;
+ /* Skip patch section header: */
+ buf += SECTION_HDR_SIZE;
+ size -= SECTION_HDR_SIZE;
- offset = header[1] + SECTION_HDR_SIZE;
- data += offset;
- left -= offset;
+ mc = (struct microcode_amd *)buf;
+ if (eq_id == mc->hdr.processor_rev_id) {
+ desc->psize = patch_size;
+ desc->mc = mc;
}
- /* mark where the next microcode container file starts */
- offset = data - (u8 *)ucode;
- ucode = data;
+ buf += patch_size;
+ size -= patch_size;
}
- return eq_id;
+ /*
+ * If we have found a patch (desc->mc), it means we're looking at the
+ * container which has a patch for this CPU so return 0 to mean, @ucode
+ * already points to the proper container. Otherwise, we return the size
+ * we scanned so that we can advance to the next container in the
+ * buffer.
+ */
+ if (desc->mc) {
+ desc->eq_id = eq_id;
+ desc->data = ucode;
+ desc->size = orig_size - size;
+
+ return 0;
+ }
+
+ return orig_size - size;
+}
+
+/*
+ * Scan the ucode blob for the proper container as we can have multiple
+ * containers glued together.
+ */
+static void scan_containers(u8 *ucode, size_t size, struct cont_desc *desc)
+{
+ ssize_t rem = size;
+
+ while (rem >= 0) {
+ ssize_t s = parse_container(ucode, rem, desc);
+ if (!s)
+ return;
+
+ ucode += s;
+ rem -= s;
+ }
}
static int __apply_microcode_amd(struct microcode_amd *mc)
@@ -214,17 +203,16 @@ static int __apply_microcode_amd(struct microcode_amd *mc)
* load_microcode_amd() to save equivalent cpu table and microcode patches in
* kernel heap memory.
*
- * Returns true if container found (sets @ret_cont), false otherwise.
+ * Returns true if container found (sets @desc), false otherwise.
*/
static bool apply_microcode_early_amd(void *ucode, size_t size, bool save_patch,
- struct cont_desc *desc)
+ struct cont_desc *ret_desc)
{
+ struct cont_desc desc = { 0 };
u8 (*patch)[PATCH_MAX_SIZE];
- u32 rev, *header, *new_rev;
- struct cont_desc ret;
- int offset, left;
- u16 eq_id = 0;
- u8 *data;
+ struct microcode_amd *mc;
+ u32 rev, *new_rev;
+ bool ret = false;
#ifdef CONFIG_X86_32
new_rev = (u32 *)__pa_nodebug(&ucode_new_rev);
@@ -237,47 +225,31 @@ static bool apply_microcode_early_amd(void *ucode, size_t size, bool save_patch,
if (check_current_patch_level(&rev, true))
return false;
- eq_id = find_proper_container(ucode, size, &ret);
- if (!eq_id)
- return false;
-
- this_equiv_id = eq_id;
- header = (u32 *)ret.data;
-
- /* We're pointing to an equiv table, skip over it. */
- data = ret.data + header[2] + CONTAINER_HDR_SZ;
- left = ret.size - (header[2] + CONTAINER_HDR_SZ);
-
- while (left > 0) {
- struct microcode_amd *mc;
-
- header = (u32 *)data;
- if (header[0] != UCODE_UCODE_TYPE || /* type */
- header[1] == 0) /* size */
- break;
+ scan_containers(ucode, size, &desc);
+ if (!desc.eq_id)
+ return ret;
- mc = (struct microcode_amd *)(data + SECTION_HDR_SIZE);
+ this_equiv_id = desc.eq_id;
- if (eq_id == mc->hdr.processor_rev_id && rev < mc->hdr.patch_id) {
+ mc = desc.mc;
+ if (!mc)
+ return ret;
- if (!__apply_microcode_amd(mc)) {
- rev = mc->hdr.patch_id;
- *new_rev = rev;
+ if (rev >= mc->hdr.patch_id)
+ return ret;
- if (save_patch)
- memcpy(patch, mc, min_t(u32, header[1], PATCH_MAX_SIZE));
- }
- }
+ if (!__apply_microcode_amd(mc)) {
+ *new_rev = mc->hdr.patch_id;
+ ret = true;
- offset = header[1] + SECTION_HDR_SIZE;
- data += offset;
- left -= offset;
+ if (save_patch)
+ memcpy(patch, mc, min_t(u32, desc.psize, PATCH_MAX_SIZE));
}
- if (desc)
- *desc = ret;
+ if (ret_desc)
+ *ret_desc = desc;
- return true;
+ return ret;
}
static bool get_builtin_microcode(struct cpio_data *cp, unsigned int family)
@@ -396,6 +368,7 @@ void load_ucode_amd_ap(unsigned int family)
}
if (!apply_microcode_early_amd(cp.data, cp.size, false, &cont)) {
+ cont.data = NULL;
cont.size = -1;
return;
}
@@ -434,7 +407,6 @@ int __init save_microcode_in_initrd_amd(unsigned int fam)
{
enum ucode_state ret;
int retval = 0;
- u16 eq_id;
if (!cont.data) {
if (IS_ENABLED(CONFIG_X86_32) && (cont.size != -1)) {
@@ -450,8 +422,8 @@ int __init save_microcode_in_initrd_amd(unsigned int fam)
return -EINVAL;
}
- eq_id = find_proper_container(cp.data, cp.size, &cont);
- if (!eq_id) {
+ scan_containers(cp.data, cp.size, &cont);
+ if (!cont.eq_id) {
cont.size = -1;
return -EINVAL;
}
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 08/16] x86/microcode: Decrease CPUID use
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
` (6 preceding siblings ...)
2017-01-20 20:29 ` [PATCH 07/16] x86/microcode/AMD: Rework container parsing Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:10 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 09/16] x86/microcode/AMD: Get rid of global this_equiv_id Borislav Petkov
` (7 subsequent siblings)
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
Get CPUID(1).EAX value once per CPU and propagate value into the callers
instead of conveniently calling it every time.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 52 +++++++++++++++++-------------------
arch/x86/kernel/cpu/microcode/core.c | 38 ++++++++++----------------
2 files changed, 38 insertions(+), 52 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 9d5f4f3626f7..9fb398e64b0a 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -47,6 +47,7 @@ static struct equiv_cpu_entry *equiv_cpu_table;
*/
static struct cont_desc {
struct microcode_amd *mc;
+ u32 cpuid_1_eax;
u32 psize;
u16 eq_id;
u8 *data;
@@ -86,7 +87,6 @@ static ssize_t parse_container(u8 *ucode, ssize_t size, struct cont_desc *desc)
struct equiv_cpu_entry *eq;
ssize_t orig_size = size;
u32 *hdr = (u32 *)ucode;
- u32 eax, ebx, ecx, edx;
u16 eq_id;
u8 *buf;
@@ -102,12 +102,8 @@ static ssize_t parse_container(u8 *ucode, ssize_t size, struct cont_desc *desc)
eq = (struct equiv_cpu_entry *)(buf + CONTAINER_HDR_SZ);
- eax = 1;
- ecx = 0;
- native_cpuid(&eax, &ebx, &ecx, &edx);
-
/* Find the equivalence ID of our CPU in this table: */
- eq_id = find_equiv_id(eq, eax);
+ eq_id = find_equiv_id(eq, desc->cpuid_1_eax);
buf += hdr[2] + CONTAINER_HDR_SZ;
size -= hdr[2] + CONTAINER_HDR_SZ;
@@ -205,8 +201,9 @@ static int __apply_microcode_amd(struct microcode_amd *mc)
*
* Returns true if container found (sets @desc), false otherwise.
*/
-static bool apply_microcode_early_amd(void *ucode, size_t size, bool save_patch,
- struct cont_desc *ret_desc)
+static bool
+apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
+ bool save_patch, struct cont_desc *ret_desc)
{
struct cont_desc desc = { 0 };
u8 (*patch)[PATCH_MAX_SIZE];
@@ -225,6 +222,8 @@ static bool apply_microcode_early_amd(void *ucode, size_t size, bool save_patch,
if (check_current_patch_level(&rev, true))
return false;
+ desc.cpuid_1_eax = cpuid_1_eax;
+
scan_containers(ucode, size, &desc);
if (!desc.eq_id)
return ret;
@@ -267,10 +266,9 @@ static bool get_builtin_microcode(struct cpio_data *cp, unsigned int family)
#endif
}
-void __init load_ucode_amd_bsp(unsigned int family)
+void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax)
{
struct ucode_cpu_info *uci;
- u32 eax, ebx, ecx, edx;
struct cpio_data cp;
const char *path;
bool use_pa;
@@ -285,19 +283,16 @@ void __init load_ucode_amd_bsp(unsigned int family)
use_pa = false;
}
- if (!get_builtin_microcode(&cp, family))
+ if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax)))
cp = find_microcode_in_initrd(path, use_pa);
if (!(cp.data && cp.size))
return;
- /* Get BSP's CPUID.EAX(1), needed in load_microcode_amd() */
- eax = 1;
- ecx = 0;
- native_cpuid(&eax, &ebx, &ecx, &edx);
- uci->cpu_sig.sig = eax;
+ /* Needed in load_microcode_amd() */
+ uci->cpu_sig.sig = cpuid_1_eax;
- apply_microcode_early_amd(cp.data, cp.size, true, NULL);
+ apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true, NULL);
}
#ifdef CONFIG_X86_32
@@ -308,7 +303,7 @@ void __init load_ucode_amd_bsp(unsigned int family)
* In save_microcode_in_initrd_amd() BSP's patch is copied to amd_ucode_patch,
* which is used upon resume from suspend.
*/
-void load_ucode_amd_ap(unsigned int family)
+void load_ucode_amd_ap(unsigned int cpuid_1_eax)
{
struct microcode_amd *mc;
struct cpio_data cp;
@@ -319,7 +314,7 @@ void load_ucode_amd_ap(unsigned int family)
return;
}
- if (!get_builtin_microcode(&cp, family))
+ if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax)))
cp = find_microcode_in_initrd((const char *)__pa_nodebug(ucode_path), true);
if (!(cp.data && cp.size))
@@ -329,14 +324,14 @@ void load_ucode_amd_ap(unsigned int family)
* This would set amd_ucode_patch above so that the following APs can
* use it directly instead of going down this path again.
*/
- apply_microcode_early_amd(cp.data, cp.size, true, NULL);
+ apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true, NULL);
}
#else
-void load_ucode_amd_ap(unsigned int family)
+void load_ucode_amd_ap(unsigned int cpuid_1_eax)
{
struct equiv_cpu_entry *eq;
struct microcode_amd *mc;
- u32 rev, eax;
+ u32 rev;
u16 eq_id;
/* 64-bit runs with paging enabled, thus early==false. */
@@ -351,7 +346,7 @@ void load_ucode_amd_ap(unsigned int family)
return;
reget:
- if (!get_builtin_microcode(&cp, family)) {
+ if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax))) {
#ifdef CONFIG_BLK_DEV_INITRD
cp = find_cpio_data(ucode_path, (void *)initrd_start,
initrd_end - initrd_start, NULL);
@@ -367,17 +362,16 @@ void load_ucode_amd_ap(unsigned int family)
}
}
- if (!apply_microcode_early_amd(cp.data, cp.size, false, &cont)) {
+ if (!apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, false, &cont)) {
cont.data = NULL;
cont.size = -1;
return;
}
}
- eax = cpuid_eax(0x00000001);
eq = (struct equiv_cpu_entry *)(cont.data + CONTAINER_HDR_SZ);
- eq_id = find_equiv_id(eq, eax);
+ eq_id = find_equiv_id(eq, cpuid_1_eax);
if (!eq_id)
return;
@@ -403,7 +397,7 @@ void load_ucode_amd_ap(unsigned int family)
static enum ucode_state
load_microcode_amd(int cpu, u8 family, const u8 *data, size_t size);
-int __init save_microcode_in_initrd_amd(unsigned int fam)
+int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)
{
enum ucode_state ret;
int retval = 0;
@@ -422,6 +416,8 @@ int __init save_microcode_in_initrd_amd(unsigned int fam)
return -EINVAL;
}
+ cont.cpuid_1_eax = cpuid_1_eax;
+
scan_containers(cp.data, cp.size, &cont);
if (!cont.eq_id) {
cont.size = -1;
@@ -432,7 +428,7 @@ int __init save_microcode_in_initrd_amd(unsigned int fam)
return -EINVAL;
}
- ret = load_microcode_amd(smp_processor_id(), fam, cont.data, cont.size);
+ ret = load_microcode_amd(smp_processor_id(), x86_family(cpuid_1_eax), cont.data, cont.size);
if (ret != UCODE_OK)
retval = -EINVAL;
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 2af69d27da62..437996c9be67 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -64,10 +64,6 @@ static DEFINE_MUTEX(microcode_mutex);
struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
-/*
- * Operations that are run on a target cpu:
- */
-
struct cpu_info_ctx {
struct cpu_signature *cpu_sig;
int err;
@@ -76,7 +72,6 @@ struct cpu_info_ctx {
static bool __init check_loader_disabled_bsp(void)
{
static const char *__dis_opt_str = "dis_ucode_ldr";
- u32 a, b, c, d;
#ifdef CONFIG_X86_32
const char *cmdline = (const char *)__pa_nodebug(boot_command_line);
@@ -92,16 +87,12 @@ static bool __init check_loader_disabled_bsp(void)
if (!have_cpuid_p())
return *res;
- a = 1;
- c = 0;
- native_cpuid(&a, &b, &c, &d);
-
/*
* CPUID(1).ECX[31]: reserved for hypervisor use. This is still not
* completely accurate as xen pv guests don't see that CPUID bit set but
* that's good enough as they don't land on the BSP path anyway.
*/
- if (c & BIT(31))
+ if (native_cpuid_ecx(1) & BIT(31))
return *res;
if (cmdline_find_option_bool(cmdline, option) <= 0)
@@ -131,23 +122,22 @@ bool get_builtin_firmware(struct cpio_data *cd, const char *name)
void __init load_ucode_bsp(void)
{
- int vendor;
- unsigned int family;
+ unsigned int vendor, cpuid_1_eax;
if (check_loader_disabled_bsp())
return;
- vendor = x86_cpuid_vendor();
- family = x86_cpuid_family();
+ vendor = x86_cpuid_vendor();
+ cpuid_1_eax = native_cpuid_eax(1);
switch (vendor) {
case X86_VENDOR_INTEL:
- if (family >= 6)
+ if (x86_family(cpuid_1_eax) >= 6)
load_ucode_intel_bsp();
break;
case X86_VENDOR_AMD:
- if (family >= 0x10)
- load_ucode_amd_bsp(family);
+ if (x86_family(cpuid_1_eax) >= 0x10)
+ load_ucode_amd_bsp(cpuid_1_eax);
break;
default:
break;
@@ -165,22 +155,22 @@ static bool check_loader_disabled_ap(void)
void load_ucode_ap(void)
{
- int vendor, family;
+ unsigned int vendor, cpuid_1_eax;
if (check_loader_disabled_ap())
return;
- vendor = x86_cpuid_vendor();
- family = x86_cpuid_family();
+ vendor = x86_cpuid_vendor();
+ cpuid_1_eax = native_cpuid_eax(1);
switch (vendor) {
case X86_VENDOR_INTEL:
- if (family >= 6)
+ if (x86_family(cpuid_1_eax) >= 6)
load_ucode_intel_ap();
break;
case X86_VENDOR_AMD:
- if (family >= 0x10)
- load_ucode_amd_ap(family);
+ if (x86_family(cpuid_1_eax) >= 0x10)
+ load_ucode_amd_ap(cpuid_1_eax);
break;
default:
break;
@@ -198,7 +188,7 @@ static int __init save_microcode_in_initrd(void)
break;
case X86_VENDOR_AMD:
if (c->x86 >= 0x10)
- return save_microcode_in_initrd_amd(c->x86);
+ return save_microcode_in_initrd_amd(cpuid_eax(1));
break;
default:
break;
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 09/16] x86/microcode/AMD: Get rid of global this_equiv_id
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
` (7 preceding siblings ...)
2017-01-20 20:29 ` [PATCH 08/16] x86/microcode: Decrease CPUID use Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:11 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 10/16] x86/microcode/AMD: Use find_microcode_in_initrd() Borislav Petkov
` (6 subsequent siblings)
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
We have a container which we update/prepare each time before applying a
microcode patch instead of using a global.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 9fb398e64b0a..4cbfe70cf458 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -56,7 +56,6 @@ static struct cont_desc {
static u32 ucode_new_rev;
static u8 amd_ucode_patch[PATCH_MAX_SIZE];
-static u16 this_equiv_id;
/*
* Microcode patch container file is prepended to the initrd in cpio
@@ -228,8 +227,6 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
if (!desc.eq_id)
return ret;
- this_equiv_id = desc.eq_id;
-
mc = desc.mc;
if (!mc)
return ret;
@@ -375,7 +372,7 @@ void load_ucode_amd_ap(unsigned int cpuid_1_eax)
if (!eq_id)
return;
- if (eq_id == this_equiv_id) {
+ if (eq_id == cont.eq_id) {
mc = (struct microcode_amd *)amd_ucode_patch;
if (mc && rev < mc->hdr.patch_id) {
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 10/16] x86/microcode/AMD: Use find_microcode_in_initrd()
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
` (8 preceding siblings ...)
2017-01-20 20:29 ` [PATCH 09/16] x86/microcode/AMD: Get rid of global this_equiv_id Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:11 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 11/16] x86/microcode: Remove local vendor variable Borislav Petkov
` (5 subsequent siblings)
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
Use the generic helper instead of semi-open-coding the procedure.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 4cbfe70cf458..7727f278de58 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -337,17 +337,15 @@ void load_ucode_amd_ap(unsigned int cpuid_1_eax)
/* First AP hasn't cached it yet, go through the blob. */
if (!cont.data) {
- struct cpio_data cp = { NULL, 0, "" };
+ struct cpio_data cp;
if (cont.size == -1)
return;
reget:
if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax))) {
-#ifdef CONFIG_BLK_DEV_INITRD
- cp = find_cpio_data(ucode_path, (void *)initrd_start,
- initrd_end - initrd_start, NULL);
-#endif
+ cp = find_microcode_in_initrd(ucode_path, false);
+
if (!(cp.data && cp.size)) {
/*
* Mark it so that other APs do not scan again
@@ -401,13 +399,9 @@ int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)
if (!cont.data) {
if (IS_ENABLED(CONFIG_X86_32) && (cont.size != -1)) {
- struct cpio_data cp = { NULL, 0, "" };
-
-#ifdef CONFIG_BLK_DEV_INITRD
- cp = find_cpio_data(ucode_path, (void *)initrd_start,
- initrd_end - initrd_start, NULL);
-#endif
+ struct cpio_data cp;
+ cp = find_microcode_in_initrd(ucode_path, false);
if (!(cp.data && cp.size)) {
cont.size = -1;
return -EINVAL;
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 11/16] x86/microcode: Remove local vendor variable
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
` (9 preceding siblings ...)
2017-01-20 20:29 ` [PATCH 10/16] x86/microcode/AMD: Use find_microcode_in_initrd() Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:12 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 12/16] x86/microcode/AMD: Check patch level only on the BSP Borislav Petkov
` (4 subsequent siblings)
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
Use x86_cpuid_vendor() directly.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
---
arch/x86/kernel/cpu/microcode/core.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 437996c9be67..dc54518299c4 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -122,15 +122,14 @@ bool get_builtin_firmware(struct cpio_data *cd, const char *name)
void __init load_ucode_bsp(void)
{
- unsigned int vendor, cpuid_1_eax;
+ unsigned int cpuid_1_eax;
if (check_loader_disabled_bsp())
return;
- vendor = x86_cpuid_vendor();
cpuid_1_eax = native_cpuid_eax(1);
- switch (vendor) {
+ switch (x86_cpuid_vendor()) {
case X86_VENDOR_INTEL:
if (x86_family(cpuid_1_eax) >= 6)
load_ucode_intel_bsp();
@@ -155,15 +154,14 @@ static bool check_loader_disabled_ap(void)
void load_ucode_ap(void)
{
- unsigned int vendor, cpuid_1_eax;
+ unsigned int cpuid_1_eax;
if (check_loader_disabled_ap())
return;
- vendor = x86_cpuid_vendor();
cpuid_1_eax = native_cpuid_eax(1);
- switch (vendor) {
+ switch (x86_cpuid_vendor()) {
case X86_VENDOR_INTEL:
if (x86_family(cpuid_1_eax) >= 6)
load_ucode_intel_ap();
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 12/16] x86/microcode/AMD: Check patch level only on the BSP
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
` (10 preceding siblings ...)
2017-01-20 20:29 ` [PATCH 11/16] x86/microcode: Remove local vendor variable Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:12 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 13/16] x86/microcode/AMD: Unify load_ucode_amd_ap() Borislav Petkov
` (3 subsequent siblings)
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
Check final patch levels for AMD only on the BSP. This way, we decide
early and only once whether to continue loading or to leave the loader
disabled on such systems.
Simplify a lot.
Signed-off-by: Borislav Petkov <bp@suse.de>
---
arch/x86/include/asm/microcode_amd.h | 2 -
arch/x86/kernel/cpu/microcode/amd.c | 78 +++++-------------------------------
arch/x86/kernel/cpu/microcode/core.c | 41 +++++++++++++++++++
3 files changed, 52 insertions(+), 69 deletions(-)
diff --git a/arch/x86/include/asm/microcode_amd.h b/arch/x86/include/asm/microcode_amd.h
index 3e3e20be829a..3d57009e168b 100644
--- a/arch/x86/include/asm/microcode_amd.h
+++ b/arch/x86/include/asm/microcode_amd.h
@@ -54,6 +54,4 @@ static inline int __init
save_microcode_in_initrd_amd(unsigned int family) { return -EINVAL; }
void reload_ucode_amd(void) {}
#endif
-
-extern bool check_current_patch_level(u32 *rev, bool early);
#endif /* _ASM_X86_MICROCODE_AMD_H */
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 7727f278de58..61743476c25b 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -207,7 +207,7 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
struct cont_desc desc = { 0 };
u8 (*patch)[PATCH_MAX_SIZE];
struct microcode_amd *mc;
- u32 rev, *new_rev;
+ u32 rev, dummy, *new_rev;
bool ret = false;
#ifdef CONFIG_X86_32
@@ -218,9 +218,6 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
patch = &amd_ucode_patch;
#endif
- if (check_current_patch_level(&rev, true))
- return false;
-
desc.cpuid_1_eax = cpuid_1_eax;
scan_containers(ucode, size, &desc);
@@ -231,6 +228,7 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
if (!mc)
return ret;
+ native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
if (rev >= mc->hdr.patch_id)
return ret;
@@ -328,13 +326,8 @@ void load_ucode_amd_ap(unsigned int cpuid_1_eax)
{
struct equiv_cpu_entry *eq;
struct microcode_amd *mc;
- u32 rev;
u16 eq_id;
- /* 64-bit runs with paging enabled, thus early==false. */
- if (check_current_patch_level(&rev, false))
- return;
-
/* First AP hasn't cached it yet, go through the blob. */
if (!cont.data) {
struct cpio_data cp;
@@ -371,6 +364,10 @@ void load_ucode_amd_ap(unsigned int cpuid_1_eax)
return;
if (eq_id == cont.eq_id) {
+ u32 rev, dummy;
+
+ native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
+
mc = (struct microcode_amd *)amd_ucode_patch;
if (mc && rev < mc->hdr.patch_id) {
@@ -436,19 +433,14 @@ int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)
void reload_ucode_amd(void)
{
struct microcode_amd *mc;
- u32 rev;
-
- /*
- * early==false because this is a syscore ->resume path and by
- * that time paging is long enabled.
- */
- if (check_current_patch_level(&rev, false))
- return;
+ u32 rev, dummy;
mc = (struct microcode_amd *)amd_ucode_patch;
if (!mc)
return;
+ rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
+
if (rev < mc->hdr.patch_id) {
if (!__apply_microcode_amd(mc)) {
ucode_new_rev = mc->hdr.patch_id;
@@ -586,60 +578,13 @@ static unsigned int verify_patch_size(u8 family, u32 patch_size,
return patch_size;
}
-/*
- * Those patch levels cannot be updated to newer ones and thus should be final.
- */
-static u32 final_levels[] = {
- 0x01000098,
- 0x0100009f,
- 0x010000af,
- 0, /* T-101 terminator */
-};
-
-/*
- * Check the current patch level on this CPU.
- *
- * @rev: Use it to return the patch level. It is set to 0 in the case of
- * error.
- *
- * Returns:
- * - true: if update should stop
- * - false: otherwise
- */
-bool check_current_patch_level(u32 *rev, bool early)
-{
- u32 lvl, dummy, i;
- bool ret = false;
- u32 *levels;
-
- native_rdmsr(MSR_AMD64_PATCH_LEVEL, lvl, dummy);
-
- if (IS_ENABLED(CONFIG_X86_32) && early)
- levels = (u32 *)__pa_nodebug(&final_levels);
- else
- levels = final_levels;
-
- for (i = 0; levels[i]; i++) {
- if (lvl == levels[i]) {
- lvl = 0;
- ret = true;
- break;
- }
- }
-
- if (rev)
- *rev = lvl;
-
- return ret;
-}
-
static int apply_microcode_amd(int cpu)
{
struct cpuinfo_x86 *c = &cpu_data(cpu);
struct microcode_amd *mc_amd;
struct ucode_cpu_info *uci;
struct ucode_patch *p;
- u32 rev;
+ u32 rev, dummy;
BUG_ON(raw_smp_processor_id() != cpu);
@@ -652,8 +597,7 @@ static int apply_microcode_amd(int cpu)
mc_amd = p->data;
uci->mc = p->data;
- if (check_current_patch_level(&rev, false))
- return -1;
+ rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
/* need to apply patch? */
if (rev >= mc_amd->hdr.patch_id) {
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index dc54518299c4..3b74d2f315d3 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -69,6 +69,42 @@ struct cpu_info_ctx {
int err;
};
+/*
+ * Those patch levels cannot be updated to newer ones and thus should be final.
+ */
+static u32 final_levels[] = {
+ 0x01000098,
+ 0x0100009f,
+ 0x010000af,
+ 0, /* T-101 terminator */
+};
+
+/*
+ * Check the current patch level on this CPU.
+ *
+ * Returns:
+ * - true: if update should stop
+ * - false: otherwise
+ */
+static bool amd_check_current_patch_level(void)
+{
+ u32 lvl, dummy, i;
+ u32 *levels;
+
+ native_rdmsr(MSR_AMD64_PATCH_LEVEL, lvl, dummy);
+
+ if (IS_ENABLED(CONFIG_X86_32))
+ levels = (u32 *)__pa_nodebug(&final_levels);
+ else
+ levels = final_levels;
+
+ for (i = 0; levels[i]; i++) {
+ if (lvl == levels[i])
+ return true;
+ }
+ return false;
+}
+
static bool __init check_loader_disabled_bsp(void)
{
static const char *__dis_opt_str = "dis_ucode_ldr";
@@ -95,6 +131,11 @@ static bool __init check_loader_disabled_bsp(void)
if (native_cpuid_ecx(1) & BIT(31))
return *res;
+ if (x86_cpuid_vendor() == X86_VENDOR_AMD) {
+ if (amd_check_current_patch_level())
+ return *res;
+ }
+
if (cmdline_find_option_bool(cmdline, option) <= 0)
*res = false;
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 13/16] x86/microcode/AMD: Unify load_ucode_amd_ap()
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
` (11 preceding siblings ...)
2017-01-20 20:29 ` [PATCH 12/16] x86/microcode/AMD: Check patch level only on the BSP Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:13 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 14/16] x86/microcode/AMD: Simplify saving from initrd Borislav Petkov
` (2 subsequent siblings)
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
Use a version for both bitness by adding a helper which does the actual
container finding and parsing which can be used on any CPU - BSP or AP.
Streamlines the paths more.
Signed-off-by: Borislav Petkov <bp@suse.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 81 ++++++++++++++-----------------------
1 file changed, 31 insertions(+), 50 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 61743476c25b..fe9e865480af 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -261,7 +261,7 @@ static bool get_builtin_microcode(struct cpio_data *cp, unsigned int family)
#endif
}
-void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax)
+void __load_ucode_amd(unsigned int cpuid_1_eax, struct cpio_data *ret)
{
struct ucode_cpu_info *uci;
struct cpio_data cp;
@@ -281,89 +281,71 @@ void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax)
if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax)))
cp = find_microcode_in_initrd(path, use_pa);
- if (!(cp.data && cp.size))
- return;
-
/* Needed in load_microcode_amd() */
uci->cpu_sig.sig = cpuid_1_eax;
- apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true, NULL);
+ *ret = cp;
}
-#ifdef CONFIG_X86_32
-/*
- * On 32-bit, since AP's early load occurs before paging is turned on, we
- * cannot traverse cpu_equiv_table and microcode_cache in kernel heap memory.
- * So during cold boot, AP will apply_ucode_in_initrd() just like the BSP.
- * In save_microcode_in_initrd_amd() BSP's patch is copied to amd_ucode_patch,
- * which is used upon resume from suspend.
- */
-void load_ucode_amd_ap(unsigned int cpuid_1_eax)
+void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax)
{
- struct microcode_amd *mc;
- struct cpio_data cp;
+ struct cpio_data cp = { };
- mc = (struct microcode_amd *)__pa_nodebug(amd_ucode_patch);
- if (mc->hdr.patch_id && mc->hdr.processor_rev_id) {
- __apply_microcode_amd(mc);
- return;
- }
-
- if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax)))
- cp = find_microcode_in_initrd((const char *)__pa_nodebug(ucode_path), true);
+ __load_ucode_amd(cpuid_1_eax, &cp);
if (!(cp.data && cp.size))
return;
- /*
- * This would set amd_ucode_patch above so that the following APs can
- * use it directly instead of going down this path again.
- */
apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true, NULL);
}
-#else
+
void load_ucode_amd_ap(unsigned int cpuid_1_eax)
{
struct equiv_cpu_entry *eq;
struct microcode_amd *mc;
+ struct cont_desc *desc;
u16 eq_id;
+ if (IS_ENABLED(CONFIG_X86_32)) {
+ mc = (struct microcode_amd *)__pa_nodebug(amd_ucode_patch);
+ desc = (struct cont_desc *)__pa_nodebug(&cont);
+ } else {
+ mc = (struct microcode_amd *)amd_ucode_patch;
+ desc = &cont;
+ }
+
/* First AP hasn't cached it yet, go through the blob. */
- if (!cont.data) {
- struct cpio_data cp;
+ if (!desc->data) {
+ struct cpio_data cp = { };
- if (cont.size == -1)
+ if (desc->size == -1)
return;
reget:
- if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax))) {
- cp = find_microcode_in_initrd(ucode_path, false);
-
- if (!(cp.data && cp.size)) {
- /*
- * Mark it so that other APs do not scan again
- * for no real reason and slow down boot
- * needlessly.
- */
- cont.size = -1;
- return;
- }
+ __load_ucode_amd(cpuid_1_eax, &cp);
+ if (!(cp.data && cp.size)) {
+ /*
+ * Mark it so that other APs do not scan again for no
+ * real reason and slow down boot needlessly.
+ */
+ desc->size = -1;
+ return;
}
- if (!apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, false, &cont)) {
- cont.data = NULL;
- cont.size = -1;
+ if (!apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, false, desc)) {
+ desc->data = NULL;
+ desc->size = -1;
return;
}
}
- eq = (struct equiv_cpu_entry *)(cont.data + CONTAINER_HDR_SZ);
+ eq = (struct equiv_cpu_entry *)(desc->data + CONTAINER_HDR_SZ);
eq_id = find_equiv_id(eq, cpuid_1_eax);
if (!eq_id)
return;
- if (eq_id == cont.eq_id) {
+ if (eq_id == desc->eq_id) {
u32 rev, dummy;
native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
@@ -384,7 +366,6 @@ void load_ucode_amd_ap(unsigned int cpuid_1_eax)
goto reget;
}
}
-#endif /* CONFIG_X86_32 */
static enum ucode_state
load_microcode_amd(int cpu, u8 family, const u8 *data, size_t size);
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 14/16] x86/microcode/AMD: Simplify saving from initrd
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
` (12 preceding siblings ...)
2017-01-20 20:29 ` [PATCH 13/16] x86/microcode/AMD: Unify load_ucode_amd_ap() Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:13 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 15/16] x86/microcode/AMD: Remove AP scanning optimization Borislav Petkov
2017-01-20 20:29 ` [PATCH 16/16] x86/microcode/AMD: Remove struct cont_desc.eq_id Borislav Petkov
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
No need to use the previously stashed info in the container - simply go
ahead and parse the initrd once more. It simplifies and streamlines the
code a whole lot.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 43 +++++++++++--------------------------
1 file changed, 13 insertions(+), 30 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index fe9e865480af..2a194e384207 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -372,43 +372,26 @@ load_microcode_amd(int cpu, u8 family, const u8 *data, size_t size);
int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)
{
+ struct cont_desc desc = { 0 };
enum ucode_state ret;
- int retval = 0;
-
- if (!cont.data) {
- if (IS_ENABLED(CONFIG_X86_32) && (cont.size != -1)) {
- struct cpio_data cp;
-
- cp = find_microcode_in_initrd(ucode_path, false);
- if (!(cp.data && cp.size)) {
- cont.size = -1;
- return -EINVAL;
- }
+ struct cpio_data cp;
- cont.cpuid_1_eax = cpuid_1_eax;
+ cp = find_microcode_in_initrd(ucode_path, false);
+ if (!(cp.data && cp.size))
+ return -EINVAL;
- scan_containers(cp.data, cp.size, &cont);
- if (!cont.eq_id) {
- cont.size = -1;
- return -EINVAL;
- }
+ desc.cpuid_1_eax = cpuid_1_eax;
- } else
- return -EINVAL;
- }
+ scan_containers(cp.data, cp.size, &desc);
+ if (!desc.eq_id)
+ return -EINVAL;
- ret = load_microcode_amd(smp_processor_id(), x86_family(cpuid_1_eax), cont.data, cont.size);
+ ret = load_microcode_amd(smp_processor_id(), x86_family(cpuid_1_eax),
+ desc.data, desc.size);
if (ret != UCODE_OK)
- retval = -EINVAL;
-
- /*
- * This will be freed any msec now, stash patches for the current
- * family and switch to patch cache for cpu hotplug, etc later.
- */
- cont.data = NULL;
- cont.size = 0;
+ return -EINVAL;
- return retval;
+ return 0;
}
void reload_ucode_amd(void)
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 15/16] x86/microcode/AMD: Remove AP scanning optimization
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
` (13 preceding siblings ...)
2017-01-20 20:29 ` [PATCH 14/16] x86/microcode/AMD: Simplify saving from initrd Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:14 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 16/16] x86/microcode/AMD: Remove struct cont_desc.eq_id Borislav Petkov
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
The idea was to not scan the microcode blob on each AP (Application
Processor) during boot and thus save us some milliseconds. However, on
architectures where the microcode engine is shared between threads, this
doesn't work. Here's why:
The microcode on CPU0, i.e., the first thread, gets updated. The second
thread, i.e., CPU1, i.e., the first AP walks into load_ucode_amd_ap(),
sees that there's no container cached and goes and scans for the proper
blob.
It finds it and as a last step of apply_microcode_early_amd(), it tries
to apply the patch but that core has already the updated microcode
revision which it has received through CPU0's update. So it returns
false and we do desc->size = -1 to prevent other APs from scanning.
However, the next AP, CPU2, has a different microcode engine which
hasn't been updated yet. The desc->size == -1 test prevents it from
scanning the blob anew and we fail to update it.
The fix is much more straight-forward than it looks: the BSP
(BootStrapping Processor), i.e., CPU0, caches the microcode patch
in amd_ucode_patch. We use that on the AP and try to apply it.
In the 99.9999% of cases where we have homogeneous cores - *not*
mixed-steppings - the application will be successful and we're good to
go.
In the remaining small set of systems, we will simply rescan the blob
and find (or not, if none present) the proper patch and apply it then.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 78 +++++++++----------------------------
1 file changed, 18 insertions(+), 60 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 2a194e384207..5e1b57747c2f 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -45,14 +45,14 @@ static struct equiv_cpu_entry *equiv_cpu_table;
* save from the initrd/builtin before jettisoning its contents. @mc is the
* microcode patch we found to match.
*/
-static struct cont_desc {
+struct cont_desc {
struct microcode_amd *mc;
u32 cpuid_1_eax;
u32 psize;
u16 eq_id;
u8 *data;
size_t size;
-} cont;
+};
static u32 ucode_new_rev;
static u8 amd_ucode_patch[PATCH_MAX_SIZE];
@@ -201,8 +201,7 @@ static int __apply_microcode_amd(struct microcode_amd *mc)
* Returns true if container found (sets @desc), false otherwise.
*/
static bool
-apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
- bool save_patch, struct cont_desc *ret_desc)
+apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size, bool save_patch)
{
struct cont_desc desc = { 0 };
u8 (*patch)[PATCH_MAX_SIZE];
@@ -240,9 +239,6 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
memcpy(patch, mc, min_t(u32, desc.psize, PATCH_MAX_SIZE));
}
- if (ret_desc)
- *ret_desc = desc;
-
return ret;
}
@@ -292,79 +288,41 @@ void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax)
struct cpio_data cp = { };
__load_ucode_amd(cpuid_1_eax, &cp);
-
if (!(cp.data && cp.size))
return;
- apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true, NULL);
+ apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true);
}
void load_ucode_amd_ap(unsigned int cpuid_1_eax)
{
- struct equiv_cpu_entry *eq;
struct microcode_amd *mc;
- struct cont_desc *desc;
- u16 eq_id;
+ struct cpio_data cp;
+ u32 *new_rev, rev, dummy;
if (IS_ENABLED(CONFIG_X86_32)) {
- mc = (struct microcode_amd *)__pa_nodebug(amd_ucode_patch);
- desc = (struct cont_desc *)__pa_nodebug(&cont);
+ mc = (struct microcode_amd *)__pa_nodebug(amd_ucode_patch);
+ new_rev = (u32 *)__pa_nodebug(&ucode_new_rev);
} else {
- mc = (struct microcode_amd *)amd_ucode_patch;
- desc = &cont;
+ mc = (struct microcode_amd *)amd_ucode_patch;
+ new_rev = &ucode_new_rev;
}
- /* First AP hasn't cached it yet, go through the blob. */
- if (!desc->data) {
- struct cpio_data cp = { };
-
- if (desc->size == -1)
- return;
-
-reget:
- __load_ucode_amd(cpuid_1_eax, &cp);
- if (!(cp.data && cp.size)) {
- /*
- * Mark it so that other APs do not scan again for no
- * real reason and slow down boot needlessly.
- */
- desc->size = -1;
- return;
- }
+ native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
- if (!apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, false, desc)) {
- desc->data = NULL;
- desc->size = -1;
+ /* Check whether we have saved a new patch already: */
+ if (*new_rev && rev < mc->hdr.patch_id) {
+ if (!__apply_microcode_amd(mc)) {
+ *new_rev = mc->hdr.patch_id;
return;
}
}
- eq = (struct equiv_cpu_entry *)(desc->data + CONTAINER_HDR_SZ);
-
- eq_id = find_equiv_id(eq, cpuid_1_eax);
- if (!eq_id)
+ __load_ucode_amd(cpuid_1_eax, &cp);
+ if (!(cp.data && cp.size))
return;
- if (eq_id == desc->eq_id) {
- u32 rev, dummy;
-
- native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
-
- mc = (struct microcode_amd *)amd_ucode_patch;
-
- if (mc && rev < mc->hdr.patch_id) {
- if (!__apply_microcode_amd(mc))
- ucode_new_rev = mc->hdr.patch_id;
- }
-
- } else {
-
- /*
- * AP has a different equivalence ID than BSP, looks like
- * mixed-steppings silicon so go through the ucode blob anew.
- */
- goto reget;
- }
+ apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, false);
}
static enum ucode_state
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 16/16] x86/microcode/AMD: Remove struct cont_desc.eq_id
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
` (14 preceding siblings ...)
2017-01-20 20:29 ` [PATCH 15/16] x86/microcode/AMD: Remove AP scanning optimization Borislav Petkov
@ 2017-01-20 20:29 ` Borislav Petkov
2017-01-23 9:14 ` [tip:x86/mce] " tip-bot for Borislav Petkov
15 siblings, 1 reply; 33+ messages in thread
From: Borislav Petkov @ 2017-01-20 20:29 UTC (permalink / raw)
To: X86 ML; +Cc: LKML
From: Borislav Petkov <bp@suse.de>
The equivalence ID was needed outside of the container scanning logic
but now, after this has been cleaned up, not anymore. Now, cont_desc.mc
is used to denote whether the container we're looking at has the proper
microcode patch for this CPU or not.
Signed-off-by: Borislav Petkov <bp@suse.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 5e1b57747c2f..7889ae492af0 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -49,7 +49,6 @@ struct cont_desc {
struct microcode_amd *mc;
u32 cpuid_1_eax;
u32 psize;
- u16 eq_id;
u8 *data;
size_t size;
};
@@ -92,10 +91,8 @@ static ssize_t parse_container(u8 *ucode, ssize_t size, struct cont_desc *desc)
/* Am I looking at an equivalence table header? */
if (hdr[0] != UCODE_MAGIC ||
hdr[1] != UCODE_EQUIV_CPU_TABLE_TYPE ||
- hdr[2] == 0) {
- desc->eq_id = 0;
+ hdr[2] == 0)
return CONTAINER_HDR_SZ;
- }
buf = ucode;
@@ -147,9 +144,8 @@ static ssize_t parse_container(u8 *ucode, ssize_t size, struct cont_desc *desc)
* buffer.
*/
if (desc->mc) {
- desc->eq_id = eq_id;
- desc->data = ucode;
- desc->size = orig_size - size;
+ desc->data = ucode;
+ desc->size = orig_size - size;
return 0;
}
@@ -220,8 +216,6 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size, bool save_p
desc.cpuid_1_eax = cpuid_1_eax;
scan_containers(ucode, size, &desc);
- if (!desc.eq_id)
- return ret;
mc = desc.mc;
if (!mc)
@@ -341,7 +335,7 @@ int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)
desc.cpuid_1_eax = cpuid_1_eax;
scan_containers(cp.data, cp.size, &desc);
- if (!desc.eq_id)
+ if (!desc.mc)
return -EINVAL;
ret = load_microcode_amd(smp_processor_id(), x86_family(cpuid_1_eax),
--
2.11.0
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode/intel: Drop stashed AP patch pointer optimization
2017-01-20 20:29 ` [PATCH 01/16] x86/microcode/intel: Drop stashed AP patch pointer optimization Borislav Petkov
@ 2017-01-23 9:07 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:07 UTC (permalink / raw)
To: linux-tip-commits; +Cc: hpa, bp, tglx, linux-kernel, mingo
Commit-ID: c26665ab5c49ad3e142e0f054ca3204f259ba09c
Gitweb: http://git.kernel.org/tip/c26665ab5c49ad3e142e0f054ca3204f259ba09c
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:40 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 09:39:55 +0100
x86/microcode/intel: Drop stashed AP patch pointer optimization
This was meant to save us the scanning of the microcode containter in
the initrd since the first AP had already done that but it can also hurt
us:
Imagine a single hyperthreaded CPU (Intel(R) Atom(TM) CPU N270, for
example) which updates the microcode on the BSP but since the microcode
engine is shared between the two threads, the update on CPU1 doesn't
happen because it has already happened on CPU0 and we don't find a newer
microcode revision on CPU1.
Which doesn't set the intel_ucode_patch pointer and at initrd
jettisoning time we don't save the microcode patch for later
application.
Now, when we suspend to RAM, the loaded microcode gets cleared so we
need to reload but there's no patch saved in the cache.
Removing the optimization fixes this issue and all is fine and dandy.
Fixes: 06b8534cb728 ("x86/microcode: Rework microcode loading")
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-2-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/intel.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c
index 3f329b7..8325d8a 100644
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -41,7 +41,7 @@
static const char ucode_path[] = "kernel/x86/microcode/GenuineIntel.bin";
-/* Current microcode patch used in early patching */
+/* Current microcode patch used in early patching on the APs. */
struct microcode_intel *intel_ucode_patch;
static inline bool cpu_signatures_match(unsigned int s1, unsigned int p1,
@@ -607,12 +607,6 @@ int __init save_microcode_in_initrd_intel(void)
struct ucode_cpu_info uci;
struct cpio_data cp;
- /*
- * AP loading didn't find any microcode patch, no need to save anything.
- */
- if (!intel_ucode_patch || IS_ERR(intel_ucode_patch))
- return 0;
-
if (!load_builtin_intel_microcode(&cp))
cp = find_microcode_in_initrd(ucode_path, false);
@@ -628,7 +622,6 @@ int __init save_microcode_in_initrd_intel(void)
return 0;
}
-
/*
* @res_patch, output: a pointer to the patch we found.
*/
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/MSR: Carve out bare minimum accessors
2017-01-20 20:29 ` [PATCH 02/16] x86/MSR: Carve out bare minimum accessors Borislav Petkov
@ 2017-01-23 9:07 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:07 UTC (permalink / raw)
To: linux-tip-commits; +Cc: mingo, hpa, tglx, linux-kernel, bp
Commit-ID: a585df8edabdb47ae25214ebb3a627ca7ce800d3
Gitweb: http://git.kernel.org/tip/a585df8edabdb47ae25214ebb3a627ca7ce800d3
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:41 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:45 +0100
x86/MSR: Carve out bare minimum accessors
Add __rdmsr() and __wrmsr() which *only* read and write an MSR with
exception handling. Those are going to be used in early code, like the
microcode loader, which cannot stomach tracing code piggybacking on the
MSR operation.
While at it, get rid of __native_write_msr_notrace().
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-3-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/include/asm/apic.h | 2 +-
arch/x86/include/asm/msr.h | 51 +++++++++++++++++++++++++++------------------
2 files changed, 32 insertions(+), 21 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 0c5fbc6..eff8e36 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -195,7 +195,7 @@ static inline void native_apic_msr_write(u32 reg, u32 v)
static inline void native_apic_msr_eoi_write(u32 reg, u32 v)
{
- wrmsr_notrace(APIC_BASE_MSR + (APIC_EOI >> 4), APIC_EOI_ACK, 0);
+ __wrmsr(APIC_BASE_MSR + (APIC_EOI >> 4), APIC_EOI_ACK, 0);
}
static inline u32 native_apic_msr_read(u32 reg)
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index db0b90c..898dba2 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -80,7 +80,14 @@ static inline void do_trace_read_msr(unsigned int msr, u64 val, int failed) {}
static inline void do_trace_rdpmc(unsigned int msr, u64 val, int failed) {}
#endif
-static inline unsigned long long native_read_msr(unsigned int msr)
+/*
+ * __rdmsr() and __wrmsr() are the two primitives which are the bare minimum MSR
+ * accessors and should not have any tracing or other functionality piggybacking
+ * on them - those are *purely* for accessing MSRs and nothing more. So don't even
+ * think of extending them - you will be slapped with a stinking trout or a frozen
+ * shark will reach you, wherever you are! You've been warned.
+ */
+static inline unsigned long long notrace __rdmsr(unsigned int msr)
{
DECLARE_ARGS(val, low, high);
@@ -88,11 +95,30 @@ static inline unsigned long long native_read_msr(unsigned int msr)
"2:\n"
_ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_rdmsr_unsafe)
: EAX_EDX_RET(val, low, high) : "c" (msr));
- if (msr_tracepoint_active(__tracepoint_read_msr))
- do_trace_read_msr(msr, EAX_EDX_VAL(val, low, high), 0);
+
return EAX_EDX_VAL(val, low, high);
}
+static inline void notrace __wrmsr(unsigned int msr, u32 low, u32 high)
+{
+ asm volatile("1: wrmsr\n"
+ "2:\n"
+ _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_wrmsr_unsafe)
+ : : "c" (msr), "a"(low), "d" (high) : "memory");
+}
+
+static inline unsigned long long native_read_msr(unsigned int msr)
+{
+ unsigned long long val;
+
+ val = __rdmsr(msr);
+
+ if (msr_tracepoint_active(__tracepoint_read_msr))
+ do_trace_read_msr(msr, val, 0);
+
+ return val;
+}
+
static inline unsigned long long native_read_msr_safe(unsigned int msr,
int *err)
{
@@ -116,29 +142,14 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr,
/* Can be uninlined because referenced by paravirt */
static inline void notrace
-__native_write_msr_notrace(unsigned int msr, u32 low, u32 high)
-{
- asm volatile("1: wrmsr\n"
- "2:\n"
- _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_wrmsr_unsafe)
- : : "c" (msr), "a"(low), "d" (high) : "memory");
-}
-
-/* Can be uninlined because referenced by paravirt */
-static inline void notrace
native_write_msr(unsigned int msr, u32 low, u32 high)
{
- __native_write_msr_notrace(msr, low, high);
+ __wrmsr(msr, low, high);
+
if (msr_tracepoint_active(__tracepoint_write_msr))
do_trace_write_msr(msr, ((u64)high << 32 | low), 0);
}
-static inline void
-wrmsr_notrace(unsigned int msr, u32 low, u32 high)
-{
- __native_write_msr_notrace(msr, low, high);
-}
-
/* Can be uninlined because referenced by paravirt */
static inline int notrace
native_write_msr_safe(unsigned int msr, u32 low, u32 high)
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode: Convert to bare minimum MSR accessors
2017-01-20 20:29 ` [PATCH 03/16] x86/microcode: Convert to bare minimum MSR accessors Borislav Petkov
@ 2017-01-23 9:08 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:08 UTC (permalink / raw)
To: linux-tip-commits; +Cc: tglx, bp, hpa, mingo, linux-kernel
Commit-ID: 0c12d18ab96e4da9f3e963bc242689bdeaaf2330
Gitweb: http://git.kernel.org/tip/0c12d18ab96e4da9f3e963bc242689bdeaaf2330
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:42 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:45 +0100
x86/microcode: Convert to bare minimum MSR accessors
Having tracepoints to the MSR accessors makes them unsuitable for early
microcode loading: think 32-bit before paging is enabled and us chasing
pointers to test whether a tracepoint is enabled or not. Results in a
reliable triple fault.
Convert to the bare ones.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-4-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/include/asm/microcode.h | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 38711df..90b22bb 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -7,18 +7,17 @@
#define native_rdmsr(msr, val1, val2) \
do { \
- u64 __val = native_read_msr((msr)); \
+ u64 __val = __rdmsr((msr)); \
(void)((val1) = (u32)__val); \
(void)((val2) = (u32)(__val >> 32)); \
} while (0)
#define native_wrmsr(msr, low, high) \
- native_write_msr(msr, low, high)
+ __wrmsr(msr, low, high)
#define native_wrmsrl(msr, val) \
- native_write_msr((msr), \
- (u32)((u64)(val)), \
- (u32)((u64)(val) >> 32))
+ __wrmsr((msr), (u32)((u64)(val)), \
+ (u32)((u64)(val) >> 32))
struct ucode_patch {
struct list_head plist;
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode/AMD: Clean up find_equiv_id()
2017-01-20 20:29 ` [PATCH 04/16] x86/microcode/AMD: Clean up find_equiv_id() Borislav Petkov
@ 2017-01-23 9:08 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:08 UTC (permalink / raw)
To: linux-tip-commits; +Cc: linux-kernel, tglx, mingo, bp, hpa
Commit-ID: 1f02ac0682055418753fe30e6433dcb11fd03e1c
Gitweb: http://git.kernel.org/tip/1f02ac0682055418753fe30e6433dcb11fd03e1c
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:43 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:46 +0100
x86/microcode/AMD: Clean up find_equiv_id()
No need to have it marked "inline" - let gcc decide. Also, shorten the
argument name and simplify while-test.
While at it, make it into a proper for-loop and simplify it even more,
as tglx suggests.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-5-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 6a31e26..5c1509a3 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -97,20 +97,13 @@ static size_t compute_container_size(u8 *data, u32 total_size)
return size;
}
-static inline u16 find_equiv_id(struct equiv_cpu_entry *equiv_cpu_table,
- unsigned int sig)
+static u16 find_equiv_id(struct equiv_cpu_entry *equiv_table, u32 sig)
{
- int i = 0;
-
- if (!equiv_cpu_table)
- return 0;
-
- while (equiv_cpu_table[i].installed_cpu != 0) {
- if (sig == equiv_cpu_table[i].installed_cpu)
- return equiv_cpu_table[i].equiv_cpu;
-
- i++;
+ for (; equiv_table && equiv_table->installed_cpu; equiv_table++) {
+ if (sig == equiv_table->installed_cpu)
+ return equiv_table->equiv_cpu;
}
+
return 0;
}
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode/AMD: Shorten function parameter's name
2017-01-20 20:29 ` [PATCH 05/16] x86/microcode/AMD: Shorten function parameter's name Borislav Petkov
@ 2017-01-23 9:09 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:09 UTC (permalink / raw)
To: linux-tip-commits; +Cc: hpa, linux-kernel, bp, mingo, tglx
Commit-ID: ef901dc33dfa9abffe7d954628b5ec7ba7f62aec
Gitweb: http://git.kernel.org/tip/ef901dc33dfa9abffe7d954628b5ec7ba7f62aec
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:44 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:46 +0100
x86/microcode/AMD: Shorten function parameter's name
The whole driver calls this "mc", do that here too.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-6-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 5c1509a3..1691f41 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -187,15 +187,15 @@ find_proper_container(u8 *ucode, size_t size, struct container *ret_cont)
return eq_id;
}
-static int __apply_microcode_amd(struct microcode_amd *mc_amd)
+static int __apply_microcode_amd(struct microcode_amd *mc)
{
u32 rev, dummy;
- native_wrmsrl(MSR_AMD64_PATCH_LOADER, (u64)(long)&mc_amd->hdr.data_code);
+ native_wrmsrl(MSR_AMD64_PATCH_LOADER, (u64)(long)&mc->hdr.data_code);
/* verify patch application was successful */
native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
- if (rev != mc_amd->hdr.patch_id)
+ if (rev != mc->hdr.patch_id)
return -1;
return 0;
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode/AMD: Extend the container struct
2017-01-20 20:29 ` [PATCH 06/16] x86/microcode/AMD: Extend the container struct Borislav Petkov
@ 2017-01-23 9:09 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:09 UTC (permalink / raw)
To: linux-tip-commits; +Cc: hpa, linux-kernel, mingo, tglx, bp
Commit-ID: f454177f739e92620d84a1f42f91b03007a1cdd0
Gitweb: http://git.kernel.org/tip/f454177f739e92620d84a1f42f91b03007a1cdd0
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:45 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:47 +0100
x86/microcode/AMD: Extend the container struct
Make it into a container descriptor which is being passed around and
stores important info like the matching container and the patch for the
current CPU. Make it static too.
Later patches will use this and thus get rid of a double container
parsing.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-7-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 26 +++++++++++++++-----------
1 file changed, 15 insertions(+), 11 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 1691f41..4e22383 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -42,11 +42,15 @@ static struct equiv_cpu_entry *equiv_cpu_table;
/*
* This points to the current valid container of microcode patches which we will
- * save from the initrd/builtin before jettisoning its contents.
+ * save from the initrd/builtin before jettisoning its contents. @mc is the
+ * microcode patch we found to match.
*/
-struct container {
- u8 *data;
- size_t size;
+static struct cont_desc {
+ struct microcode_amd *mc;
+ u32 psize;
+ u16 eq_id;
+ u8 *data;
+ size_t size;
} cont;
static u32 ucode_new_rev;
@@ -113,9 +117,9 @@ static u16 find_equiv_id(struct equiv_cpu_entry *equiv_table, u32 sig)
* table or 0 if none found.
*/
static u16
-find_proper_container(u8 *ucode, size_t size, struct container *ret_cont)
+find_proper_container(u8 *ucode, size_t size, struct cont_desc *desc)
{
- struct container ret = { NULL, 0 };
+ struct cont_desc ret = { 0 };
u32 eax, ebx, ecx, edx;
struct equiv_cpu_entry *eq;
int offset, left;
@@ -158,7 +162,7 @@ find_proper_container(u8 *ucode, size_t size, struct container *ret_cont)
*/
left = ret.size - offset;
- *ret_cont = ret;
+ *desc = ret;
return eq_id;
}
@@ -213,11 +217,11 @@ static int __apply_microcode_amd(struct microcode_amd *mc)
* Returns true if container found (sets @ret_cont), false otherwise.
*/
static bool apply_microcode_early_amd(void *ucode, size_t size, bool save_patch,
- struct container *ret_cont)
+ struct cont_desc *desc)
{
u8 (*patch)[PATCH_MAX_SIZE];
u32 rev, *header, *new_rev;
- struct container ret;
+ struct cont_desc ret;
int offset, left;
u16 eq_id = 0;
u8 *data;
@@ -270,8 +274,8 @@ static bool apply_microcode_early_amd(void *ucode, size_t size, bool save_patch,
left -= offset;
}
- if (ret_cont)
- *ret_cont = ret;
+ if (desc)
+ *desc = ret;
return true;
}
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode/AMD: Rework container parsing
2017-01-20 20:29 ` [PATCH 07/16] x86/microcode/AMD: Rework container parsing Borislav Petkov
@ 2017-01-23 9:10 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:10 UTC (permalink / raw)
To: linux-tip-commits; +Cc: linux-kernel, hpa, mingo, bp, tglx
Commit-ID: 8801b3fcb5744dc536272ba4ccfd6faca9b46705
Gitweb: http://git.kernel.org/tip/8801b3fcb5744dc536272ba4ccfd6faca9b46705
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:46 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:47 +0100
x86/microcode/AMD: Rework container parsing
It was pretty clumsy before and the whole work of parsing the microcode
containers was spread around the functions wrongly.
Clean it up so that there's a main scan_containers() function which
iterates over the microcode blob and picks apart the containers glued
together. For each container, it calls a parse_container() helper which
concentrates on one container only: sanity-checking, parsing, counting
microcode patches in there, etc.
It makes much more sense now and it is actually very readable. Oh, and
we luvz a diffstat removing more crap than adding.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-8-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 238 ++++++++++++++++--------------------
1 file changed, 105 insertions(+), 133 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 4e22383..9d5f4f3 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -64,43 +64,6 @@ static u16 this_equiv_id;
static const char
ucode_path[] __maybe_unused = "kernel/x86/microcode/AuthenticAMD.bin";
-static size_t compute_container_size(u8 *data, u32 total_size)
-{
- size_t size = 0;
- u32 *header = (u32 *)data;
-
- if (header[0] != UCODE_MAGIC ||
- header[1] != UCODE_EQUIV_CPU_TABLE_TYPE || /* type */
- header[2] == 0) /* size */
- return size;
-
- size = header[2] + CONTAINER_HDR_SZ;
- total_size -= size;
- data += size;
-
- while (total_size) {
- u16 patch_size;
-
- header = (u32 *)data;
-
- if (header[0] != UCODE_UCODE_TYPE)
- break;
-
- /*
- * Sanity-check patch size.
- */
- patch_size = header[1];
- if (patch_size > PATCH_MAX_SIZE)
- break;
-
- size += patch_size + SECTION_HDR_SIZE;
- data += patch_size + SECTION_HDR_SIZE;
- total_size -= patch_size + SECTION_HDR_SIZE;
- }
-
- return size;
-}
-
static u16 find_equiv_id(struct equiv_cpu_entry *equiv_table, u32 sig)
{
for (; equiv_table && equiv_table->installed_cpu; equiv_table++) {
@@ -115,80 +78,106 @@ static u16 find_equiv_id(struct equiv_cpu_entry *equiv_table, u32 sig)
* This scans the ucode blob for the proper container as we can have multiple
* containers glued together. Returns the equivalence ID from the equivalence
* table or 0 if none found.
+ * Returns the amount of bytes consumed while scanning. @desc contains all the
+ * data we're going to use in later stages of the application.
*/
-static u16
-find_proper_container(u8 *ucode, size_t size, struct cont_desc *desc)
+static ssize_t parse_container(u8 *ucode, ssize_t size, struct cont_desc *desc)
{
- struct cont_desc ret = { 0 };
- u32 eax, ebx, ecx, edx;
struct equiv_cpu_entry *eq;
- int offset, left;
- u16 eq_id = 0;
- u32 *header;
- u8 *data;
+ ssize_t orig_size = size;
+ u32 *hdr = (u32 *)ucode;
+ u32 eax, ebx, ecx, edx;
+ u16 eq_id;
+ u8 *buf;
- data = ucode;
- left = size;
- header = (u32 *)data;
+ /* Am I looking at an equivalence table header? */
+ if (hdr[0] != UCODE_MAGIC ||
+ hdr[1] != UCODE_EQUIV_CPU_TABLE_TYPE ||
+ hdr[2] == 0) {
+ desc->eq_id = 0;
+ return CONTAINER_HDR_SZ;
+ }
+ buf = ucode;
- /* find equiv cpu table */
- if (header[0] != UCODE_MAGIC ||
- header[1] != UCODE_EQUIV_CPU_TABLE_TYPE || /* type */
- header[2] == 0) /* size */
- return eq_id;
+ eq = (struct equiv_cpu_entry *)(buf + CONTAINER_HDR_SZ);
- eax = 0x00000001;
+ eax = 1;
ecx = 0;
native_cpuid(&eax, &ebx, &ecx, &edx);
- while (left > 0) {
- eq = (struct equiv_cpu_entry *)(data + CONTAINER_HDR_SZ);
-
- ret.data = data;
+ /* Find the equivalence ID of our CPU in this table: */
+ eq_id = find_equiv_id(eq, eax);
- /* Advance past the container header */
- offset = header[2] + CONTAINER_HDR_SZ;
- data += offset;
- left -= offset;
+ buf += hdr[2] + CONTAINER_HDR_SZ;
+ size -= hdr[2] + CONTAINER_HDR_SZ;
- eq_id = find_equiv_id(eq, eax);
- if (eq_id) {
- ret.size = compute_container_size(ret.data, left + offset);
+ /*
+ * Scan through the rest of the container to find where it ends. We do
+ * some basic sanity-checking too.
+ */
+ while (size > 0) {
+ struct microcode_amd *mc;
+ u32 patch_size;
- /*
- * truncate how much we need to iterate over in the
- * ucode update loop below
- */
- left = ret.size - offset;
+ hdr = (u32 *)buf;
- *desc = ret;
- return eq_id;
- }
+ if (hdr[0] != UCODE_UCODE_TYPE)
+ break;
- /*
- * support multiple container files appended together. if this
- * one does not have a matching equivalent cpu entry, we fast
- * forward to the next container file.
- */
- while (left > 0) {
- header = (u32 *)data;
+ /* Sanity-check patch size. */
+ patch_size = hdr[1];
+ if (patch_size > PATCH_MAX_SIZE)
+ break;
- if (header[0] == UCODE_MAGIC &&
- header[1] == UCODE_EQUIV_CPU_TABLE_TYPE)
- break;
+ /* Skip patch section header: */
+ buf += SECTION_HDR_SIZE;
+ size -= SECTION_HDR_SIZE;
- offset = header[1] + SECTION_HDR_SIZE;
- data += offset;
- left -= offset;
+ mc = (struct microcode_amd *)buf;
+ if (eq_id == mc->hdr.processor_rev_id) {
+ desc->psize = patch_size;
+ desc->mc = mc;
}
- /* mark where the next microcode container file starts */
- offset = data - (u8 *)ucode;
- ucode = data;
+ buf += patch_size;
+ size -= patch_size;
}
- return eq_id;
+ /*
+ * If we have found a patch (desc->mc), it means we're looking at the
+ * container which has a patch for this CPU so return 0 to mean, @ucode
+ * already points to the proper container. Otherwise, we return the size
+ * we scanned so that we can advance to the next container in the
+ * buffer.
+ */
+ if (desc->mc) {
+ desc->eq_id = eq_id;
+ desc->data = ucode;
+ desc->size = orig_size - size;
+
+ return 0;
+ }
+
+ return orig_size - size;
+}
+
+/*
+ * Scan the ucode blob for the proper container as we can have multiple
+ * containers glued together.
+ */
+static void scan_containers(u8 *ucode, size_t size, struct cont_desc *desc)
+{
+ ssize_t rem = size;
+
+ while (rem >= 0) {
+ ssize_t s = parse_container(ucode, rem, desc);
+ if (!s)
+ return;
+
+ ucode += s;
+ rem -= s;
+ }
}
static int __apply_microcode_amd(struct microcode_amd *mc)
@@ -214,17 +203,16 @@ static int __apply_microcode_amd(struct microcode_amd *mc)
* load_microcode_amd() to save equivalent cpu table and microcode patches in
* kernel heap memory.
*
- * Returns true if container found (sets @ret_cont), false otherwise.
+ * Returns true if container found (sets @desc), false otherwise.
*/
static bool apply_microcode_early_amd(void *ucode, size_t size, bool save_patch,
- struct cont_desc *desc)
+ struct cont_desc *ret_desc)
{
+ struct cont_desc desc = { 0 };
u8 (*patch)[PATCH_MAX_SIZE];
- u32 rev, *header, *new_rev;
- struct cont_desc ret;
- int offset, left;
- u16 eq_id = 0;
- u8 *data;
+ struct microcode_amd *mc;
+ u32 rev, *new_rev;
+ bool ret = false;
#ifdef CONFIG_X86_32
new_rev = (u32 *)__pa_nodebug(&ucode_new_rev);
@@ -237,47 +225,31 @@ static bool apply_microcode_early_amd(void *ucode, size_t size, bool save_patch,
if (check_current_patch_level(&rev, true))
return false;
- eq_id = find_proper_container(ucode, size, &ret);
- if (!eq_id)
- return false;
-
- this_equiv_id = eq_id;
- header = (u32 *)ret.data;
-
- /* We're pointing to an equiv table, skip over it. */
- data = ret.data + header[2] + CONTAINER_HDR_SZ;
- left = ret.size - (header[2] + CONTAINER_HDR_SZ);
-
- while (left > 0) {
- struct microcode_amd *mc;
-
- header = (u32 *)data;
- if (header[0] != UCODE_UCODE_TYPE || /* type */
- header[1] == 0) /* size */
- break;
+ scan_containers(ucode, size, &desc);
+ if (!desc.eq_id)
+ return ret;
- mc = (struct microcode_amd *)(data + SECTION_HDR_SIZE);
+ this_equiv_id = desc.eq_id;
- if (eq_id == mc->hdr.processor_rev_id && rev < mc->hdr.patch_id) {
+ mc = desc.mc;
+ if (!mc)
+ return ret;
- if (!__apply_microcode_amd(mc)) {
- rev = mc->hdr.patch_id;
- *new_rev = rev;
+ if (rev >= mc->hdr.patch_id)
+ return ret;
- if (save_patch)
- memcpy(patch, mc, min_t(u32, header[1], PATCH_MAX_SIZE));
- }
- }
+ if (!__apply_microcode_amd(mc)) {
+ *new_rev = mc->hdr.patch_id;
+ ret = true;
- offset = header[1] + SECTION_HDR_SIZE;
- data += offset;
- left -= offset;
+ if (save_patch)
+ memcpy(patch, mc, min_t(u32, desc.psize, PATCH_MAX_SIZE));
}
- if (desc)
- *desc = ret;
+ if (ret_desc)
+ *ret_desc = desc;
- return true;
+ return ret;
}
static bool get_builtin_microcode(struct cpio_data *cp, unsigned int family)
@@ -396,6 +368,7 @@ reget:
}
if (!apply_microcode_early_amd(cp.data, cp.size, false, &cont)) {
+ cont.data = NULL;
cont.size = -1;
return;
}
@@ -434,7 +407,6 @@ int __init save_microcode_in_initrd_amd(unsigned int fam)
{
enum ucode_state ret;
int retval = 0;
- u16 eq_id;
if (!cont.data) {
if (IS_ENABLED(CONFIG_X86_32) && (cont.size != -1)) {
@@ -450,8 +422,8 @@ int __init save_microcode_in_initrd_amd(unsigned int fam)
return -EINVAL;
}
- eq_id = find_proper_container(cp.data, cp.size, &cont);
- if (!eq_id) {
+ scan_containers(cp.data, cp.size, &cont);
+ if (!cont.eq_id) {
cont.size = -1;
return -EINVAL;
}
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode: Decrease CPUID use
2017-01-20 20:29 ` [PATCH 08/16] x86/microcode: Decrease CPUID use Borislav Petkov
@ 2017-01-23 9:10 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:10 UTC (permalink / raw)
To: linux-tip-commits; +Cc: mingo, linux-kernel, bp, hpa, tglx
Commit-ID: 309aac77768c0c689eac4900ca8a6e9ef470035c
Gitweb: http://git.kernel.org/tip/309aac77768c0c689eac4900ca8a6e9ef470035c
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:47 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:47 +0100
x86/microcode: Decrease CPUID use
Get CPUID(1).EAX value once per CPU and propagate value into the callers
instead of conveniently calling it every time.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-9-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 52 +++++++++++++++++-------------------
arch/x86/kernel/cpu/microcode/core.c | 38 ++++++++++----------------
2 files changed, 38 insertions(+), 52 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 9d5f4f3..9fb398e 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -47,6 +47,7 @@ static struct equiv_cpu_entry *equiv_cpu_table;
*/
static struct cont_desc {
struct microcode_amd *mc;
+ u32 cpuid_1_eax;
u32 psize;
u16 eq_id;
u8 *data;
@@ -86,7 +87,6 @@ static ssize_t parse_container(u8 *ucode, ssize_t size, struct cont_desc *desc)
struct equiv_cpu_entry *eq;
ssize_t orig_size = size;
u32 *hdr = (u32 *)ucode;
- u32 eax, ebx, ecx, edx;
u16 eq_id;
u8 *buf;
@@ -102,12 +102,8 @@ static ssize_t parse_container(u8 *ucode, ssize_t size, struct cont_desc *desc)
eq = (struct equiv_cpu_entry *)(buf + CONTAINER_HDR_SZ);
- eax = 1;
- ecx = 0;
- native_cpuid(&eax, &ebx, &ecx, &edx);
-
/* Find the equivalence ID of our CPU in this table: */
- eq_id = find_equiv_id(eq, eax);
+ eq_id = find_equiv_id(eq, desc->cpuid_1_eax);
buf += hdr[2] + CONTAINER_HDR_SZ;
size -= hdr[2] + CONTAINER_HDR_SZ;
@@ -205,8 +201,9 @@ static int __apply_microcode_amd(struct microcode_amd *mc)
*
* Returns true if container found (sets @desc), false otherwise.
*/
-static bool apply_microcode_early_amd(void *ucode, size_t size, bool save_patch,
- struct cont_desc *ret_desc)
+static bool
+apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
+ bool save_patch, struct cont_desc *ret_desc)
{
struct cont_desc desc = { 0 };
u8 (*patch)[PATCH_MAX_SIZE];
@@ -225,6 +222,8 @@ static bool apply_microcode_early_amd(void *ucode, size_t size, bool save_patch,
if (check_current_patch_level(&rev, true))
return false;
+ desc.cpuid_1_eax = cpuid_1_eax;
+
scan_containers(ucode, size, &desc);
if (!desc.eq_id)
return ret;
@@ -267,10 +266,9 @@ static bool get_builtin_microcode(struct cpio_data *cp, unsigned int family)
#endif
}
-void __init load_ucode_amd_bsp(unsigned int family)
+void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax)
{
struct ucode_cpu_info *uci;
- u32 eax, ebx, ecx, edx;
struct cpio_data cp;
const char *path;
bool use_pa;
@@ -285,19 +283,16 @@ void __init load_ucode_amd_bsp(unsigned int family)
use_pa = false;
}
- if (!get_builtin_microcode(&cp, family))
+ if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax)))
cp = find_microcode_in_initrd(path, use_pa);
if (!(cp.data && cp.size))
return;
- /* Get BSP's CPUID.EAX(1), needed in load_microcode_amd() */
- eax = 1;
- ecx = 0;
- native_cpuid(&eax, &ebx, &ecx, &edx);
- uci->cpu_sig.sig = eax;
+ /* Needed in load_microcode_amd() */
+ uci->cpu_sig.sig = cpuid_1_eax;
- apply_microcode_early_amd(cp.data, cp.size, true, NULL);
+ apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true, NULL);
}
#ifdef CONFIG_X86_32
@@ -308,7 +303,7 @@ void __init load_ucode_amd_bsp(unsigned int family)
* In save_microcode_in_initrd_amd() BSP's patch is copied to amd_ucode_patch,
* which is used upon resume from suspend.
*/
-void load_ucode_amd_ap(unsigned int family)
+void load_ucode_amd_ap(unsigned int cpuid_1_eax)
{
struct microcode_amd *mc;
struct cpio_data cp;
@@ -319,7 +314,7 @@ void load_ucode_amd_ap(unsigned int family)
return;
}
- if (!get_builtin_microcode(&cp, family))
+ if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax)))
cp = find_microcode_in_initrd((const char *)__pa_nodebug(ucode_path), true);
if (!(cp.data && cp.size))
@@ -329,14 +324,14 @@ void load_ucode_amd_ap(unsigned int family)
* This would set amd_ucode_patch above so that the following APs can
* use it directly instead of going down this path again.
*/
- apply_microcode_early_amd(cp.data, cp.size, true, NULL);
+ apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true, NULL);
}
#else
-void load_ucode_amd_ap(unsigned int family)
+void load_ucode_amd_ap(unsigned int cpuid_1_eax)
{
struct equiv_cpu_entry *eq;
struct microcode_amd *mc;
- u32 rev, eax;
+ u32 rev;
u16 eq_id;
/* 64-bit runs with paging enabled, thus early==false. */
@@ -351,7 +346,7 @@ void load_ucode_amd_ap(unsigned int family)
return;
reget:
- if (!get_builtin_microcode(&cp, family)) {
+ if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax))) {
#ifdef CONFIG_BLK_DEV_INITRD
cp = find_cpio_data(ucode_path, (void *)initrd_start,
initrd_end - initrd_start, NULL);
@@ -367,17 +362,16 @@ reget:
}
}
- if (!apply_microcode_early_amd(cp.data, cp.size, false, &cont)) {
+ if (!apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, false, &cont)) {
cont.data = NULL;
cont.size = -1;
return;
}
}
- eax = cpuid_eax(0x00000001);
eq = (struct equiv_cpu_entry *)(cont.data + CONTAINER_HDR_SZ);
- eq_id = find_equiv_id(eq, eax);
+ eq_id = find_equiv_id(eq, cpuid_1_eax);
if (!eq_id)
return;
@@ -403,7 +397,7 @@ reget:
static enum ucode_state
load_microcode_amd(int cpu, u8 family, const u8 *data, size_t size);
-int __init save_microcode_in_initrd_amd(unsigned int fam)
+int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)
{
enum ucode_state ret;
int retval = 0;
@@ -422,6 +416,8 @@ int __init save_microcode_in_initrd_amd(unsigned int fam)
return -EINVAL;
}
+ cont.cpuid_1_eax = cpuid_1_eax;
+
scan_containers(cp.data, cp.size, &cont);
if (!cont.eq_id) {
cont.size = -1;
@@ -432,7 +428,7 @@ int __init save_microcode_in_initrd_amd(unsigned int fam)
return -EINVAL;
}
- ret = load_microcode_amd(smp_processor_id(), fam, cont.data, cont.size);
+ ret = load_microcode_amd(smp_processor_id(), x86_family(cpuid_1_eax), cont.data, cont.size);
if (ret != UCODE_OK)
retval = -EINVAL;
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 2af69d2..437996c 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -64,10 +64,6 @@ static DEFINE_MUTEX(microcode_mutex);
struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
-/*
- * Operations that are run on a target cpu:
- */
-
struct cpu_info_ctx {
struct cpu_signature *cpu_sig;
int err;
@@ -76,7 +72,6 @@ struct cpu_info_ctx {
static bool __init check_loader_disabled_bsp(void)
{
static const char *__dis_opt_str = "dis_ucode_ldr";
- u32 a, b, c, d;
#ifdef CONFIG_X86_32
const char *cmdline = (const char *)__pa_nodebug(boot_command_line);
@@ -92,16 +87,12 @@ static bool __init check_loader_disabled_bsp(void)
if (!have_cpuid_p())
return *res;
- a = 1;
- c = 0;
- native_cpuid(&a, &b, &c, &d);
-
/*
* CPUID(1).ECX[31]: reserved for hypervisor use. This is still not
* completely accurate as xen pv guests don't see that CPUID bit set but
* that's good enough as they don't land on the BSP path anyway.
*/
- if (c & BIT(31))
+ if (native_cpuid_ecx(1) & BIT(31))
return *res;
if (cmdline_find_option_bool(cmdline, option) <= 0)
@@ -131,23 +122,22 @@ bool get_builtin_firmware(struct cpio_data *cd, const char *name)
void __init load_ucode_bsp(void)
{
- int vendor;
- unsigned int family;
+ unsigned int vendor, cpuid_1_eax;
if (check_loader_disabled_bsp())
return;
- vendor = x86_cpuid_vendor();
- family = x86_cpuid_family();
+ vendor = x86_cpuid_vendor();
+ cpuid_1_eax = native_cpuid_eax(1);
switch (vendor) {
case X86_VENDOR_INTEL:
- if (family >= 6)
+ if (x86_family(cpuid_1_eax) >= 6)
load_ucode_intel_bsp();
break;
case X86_VENDOR_AMD:
- if (family >= 0x10)
- load_ucode_amd_bsp(family);
+ if (x86_family(cpuid_1_eax) >= 0x10)
+ load_ucode_amd_bsp(cpuid_1_eax);
break;
default:
break;
@@ -165,22 +155,22 @@ static bool check_loader_disabled_ap(void)
void load_ucode_ap(void)
{
- int vendor, family;
+ unsigned int vendor, cpuid_1_eax;
if (check_loader_disabled_ap())
return;
- vendor = x86_cpuid_vendor();
- family = x86_cpuid_family();
+ vendor = x86_cpuid_vendor();
+ cpuid_1_eax = native_cpuid_eax(1);
switch (vendor) {
case X86_VENDOR_INTEL:
- if (family >= 6)
+ if (x86_family(cpuid_1_eax) >= 6)
load_ucode_intel_ap();
break;
case X86_VENDOR_AMD:
- if (family >= 0x10)
- load_ucode_amd_ap(family);
+ if (x86_family(cpuid_1_eax) >= 0x10)
+ load_ucode_amd_ap(cpuid_1_eax);
break;
default:
break;
@@ -198,7 +188,7 @@ static int __init save_microcode_in_initrd(void)
break;
case X86_VENDOR_AMD:
if (c->x86 >= 0x10)
- return save_microcode_in_initrd_amd(c->x86);
+ return save_microcode_in_initrd_amd(cpuid_eax(1));
break;
default:
break;
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode/AMD: Get rid of global this_equiv_id
2017-01-20 20:29 ` [PATCH 09/16] x86/microcode/AMD: Get rid of global this_equiv_id Borislav Petkov
@ 2017-01-23 9:11 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:11 UTC (permalink / raw)
To: linux-tip-commits; +Cc: mingo, linux-kernel, bp, hpa, tglx
Commit-ID: 3da9b41794590022d09caa345aaa7c812ac22971
Gitweb: http://git.kernel.org/tip/3da9b41794590022d09caa345aaa7c812ac22971
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:48 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:48 +0100
x86/microcode/AMD: Get rid of global this_equiv_id
We have a container which we update/prepare each time before applying a
microcode patch instead of using a global.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-10-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 9fb398e..4cbfe70 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -56,7 +56,6 @@ static struct cont_desc {
static u32 ucode_new_rev;
static u8 amd_ucode_patch[PATCH_MAX_SIZE];
-static u16 this_equiv_id;
/*
* Microcode patch container file is prepended to the initrd in cpio
@@ -228,8 +227,6 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
if (!desc.eq_id)
return ret;
- this_equiv_id = desc.eq_id;
-
mc = desc.mc;
if (!mc)
return ret;
@@ -375,7 +372,7 @@ reget:
if (!eq_id)
return;
- if (eq_id == this_equiv_id) {
+ if (eq_id == cont.eq_id) {
mc = (struct microcode_amd *)amd_ucode_patch;
if (mc && rev < mc->hdr.patch_id) {
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode/AMD: Use find_microcode_in_initrd()
2017-01-20 20:29 ` [PATCH 10/16] x86/microcode/AMD: Use find_microcode_in_initrd() Borislav Petkov
@ 2017-01-23 9:11 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:11 UTC (permalink / raw)
To: linux-tip-commits; +Cc: bp, linux-kernel, mingo, tglx, hpa
Commit-ID: 8cc26e0b4c49246564f773edbbefa3d5dc91d56e
Gitweb: http://git.kernel.org/tip/8cc26e0b4c49246564f773edbbefa3d5dc91d56e
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:49 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:48 +0100
x86/microcode/AMD: Use find_microcode_in_initrd()
Use the generic helper instead of semi-open-coding the procedure.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-11-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 4cbfe70..7727f27 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -337,17 +337,15 @@ void load_ucode_amd_ap(unsigned int cpuid_1_eax)
/* First AP hasn't cached it yet, go through the blob. */
if (!cont.data) {
- struct cpio_data cp = { NULL, 0, "" };
+ struct cpio_data cp;
if (cont.size == -1)
return;
reget:
if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax))) {
-#ifdef CONFIG_BLK_DEV_INITRD
- cp = find_cpio_data(ucode_path, (void *)initrd_start,
- initrd_end - initrd_start, NULL);
-#endif
+ cp = find_microcode_in_initrd(ucode_path, false);
+
if (!(cp.data && cp.size)) {
/*
* Mark it so that other APs do not scan again
@@ -401,13 +399,9 @@ int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)
if (!cont.data) {
if (IS_ENABLED(CONFIG_X86_32) && (cont.size != -1)) {
- struct cpio_data cp = { NULL, 0, "" };
-
-#ifdef CONFIG_BLK_DEV_INITRD
- cp = find_cpio_data(ucode_path, (void *)initrd_start,
- initrd_end - initrd_start, NULL);
-#endif
+ struct cpio_data cp;
+ cp = find_microcode_in_initrd(ucode_path, false);
if (!(cp.data && cp.size)) {
cont.size = -1;
return -EINVAL;
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode: Remove local vendor variable
2017-01-20 20:29 ` [PATCH 11/16] x86/microcode: Remove local vendor variable Borislav Petkov
@ 2017-01-23 9:12 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:12 UTC (permalink / raw)
To: linux-tip-commits; +Cc: mingo, hpa, bp, tglx, linux-kernel
Commit-ID: 7a93a40be23e5557934d773cc89b7b3627c08097
Gitweb: http://git.kernel.org/tip/7a93a40be23e5557934d773cc89b7b3627c08097
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:50 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:49 +0100
x86/microcode: Remove local vendor variable
Use x86_cpuid_vendor() directly.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-12-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/core.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 437996c..dc54518 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -122,15 +122,14 @@ bool get_builtin_firmware(struct cpio_data *cd, const char *name)
void __init load_ucode_bsp(void)
{
- unsigned int vendor, cpuid_1_eax;
+ unsigned int cpuid_1_eax;
if (check_loader_disabled_bsp())
return;
- vendor = x86_cpuid_vendor();
cpuid_1_eax = native_cpuid_eax(1);
- switch (vendor) {
+ switch (x86_cpuid_vendor()) {
case X86_VENDOR_INTEL:
if (x86_family(cpuid_1_eax) >= 6)
load_ucode_intel_bsp();
@@ -155,15 +154,14 @@ static bool check_loader_disabled_ap(void)
void load_ucode_ap(void)
{
- unsigned int vendor, cpuid_1_eax;
+ unsigned int cpuid_1_eax;
if (check_loader_disabled_ap())
return;
- vendor = x86_cpuid_vendor();
cpuid_1_eax = native_cpuid_eax(1);
- switch (vendor) {
+ switch (x86_cpuid_vendor()) {
case X86_VENDOR_INTEL:
if (x86_family(cpuid_1_eax) >= 6)
load_ucode_intel_ap();
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode/AMD: Check patch level only on the BSP
2017-01-20 20:29 ` [PATCH 12/16] x86/microcode/AMD: Check patch level only on the BSP Borislav Petkov
@ 2017-01-23 9:12 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:12 UTC (permalink / raw)
To: linux-tip-commits; +Cc: linux-kernel, tglx, bp, hpa, mingo
Commit-ID: f3ad136d6ef966c8ba9090770c2bfe7e85f18471
Gitweb: http://git.kernel.org/tip/f3ad136d6ef966c8ba9090770c2bfe7e85f18471
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:51 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:50 +0100
x86/microcode/AMD: Check patch level only on the BSP
Check final patch levels for AMD only on the BSP. This way, we decide
early and only once whether to continue loading or to leave the loader
disabled on such systems.
Simplify a lot.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-13-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/include/asm/microcode_amd.h | 2 -
arch/x86/kernel/cpu/microcode/amd.c | 78 +++++-------------------------------
arch/x86/kernel/cpu/microcode/core.c | 41 +++++++++++++++++++
3 files changed, 52 insertions(+), 69 deletions(-)
diff --git a/arch/x86/include/asm/microcode_amd.h b/arch/x86/include/asm/microcode_amd.h
index 3e3e20b..3d57009 100644
--- a/arch/x86/include/asm/microcode_amd.h
+++ b/arch/x86/include/asm/microcode_amd.h
@@ -54,6 +54,4 @@ static inline int __init
save_microcode_in_initrd_amd(unsigned int family) { return -EINVAL; }
void reload_ucode_amd(void) {}
#endif
-
-extern bool check_current_patch_level(u32 *rev, bool early);
#endif /* _ASM_X86_MICROCODE_AMD_H */
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 7727f27..6174347 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -207,7 +207,7 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
struct cont_desc desc = { 0 };
u8 (*patch)[PATCH_MAX_SIZE];
struct microcode_amd *mc;
- u32 rev, *new_rev;
+ u32 rev, dummy, *new_rev;
bool ret = false;
#ifdef CONFIG_X86_32
@@ -218,9 +218,6 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
patch = &amd_ucode_patch;
#endif
- if (check_current_patch_level(&rev, true))
- return false;
-
desc.cpuid_1_eax = cpuid_1_eax;
scan_containers(ucode, size, &desc);
@@ -231,6 +228,7 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
if (!mc)
return ret;
+ native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
if (rev >= mc->hdr.patch_id)
return ret;
@@ -328,13 +326,8 @@ void load_ucode_amd_ap(unsigned int cpuid_1_eax)
{
struct equiv_cpu_entry *eq;
struct microcode_amd *mc;
- u32 rev;
u16 eq_id;
- /* 64-bit runs with paging enabled, thus early==false. */
- if (check_current_patch_level(&rev, false))
- return;
-
/* First AP hasn't cached it yet, go through the blob. */
if (!cont.data) {
struct cpio_data cp;
@@ -371,6 +364,10 @@ reget:
return;
if (eq_id == cont.eq_id) {
+ u32 rev, dummy;
+
+ native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
+
mc = (struct microcode_amd *)amd_ucode_patch;
if (mc && rev < mc->hdr.patch_id) {
@@ -436,19 +433,14 @@ int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)
void reload_ucode_amd(void)
{
struct microcode_amd *mc;
- u32 rev;
-
- /*
- * early==false because this is a syscore ->resume path and by
- * that time paging is long enabled.
- */
- if (check_current_patch_level(&rev, false))
- return;
+ u32 rev, dummy;
mc = (struct microcode_amd *)amd_ucode_patch;
if (!mc)
return;
+ rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
+
if (rev < mc->hdr.patch_id) {
if (!__apply_microcode_amd(mc)) {
ucode_new_rev = mc->hdr.patch_id;
@@ -586,60 +578,13 @@ static unsigned int verify_patch_size(u8 family, u32 patch_size,
return patch_size;
}
-/*
- * Those patch levels cannot be updated to newer ones and thus should be final.
- */
-static u32 final_levels[] = {
- 0x01000098,
- 0x0100009f,
- 0x010000af,
- 0, /* T-101 terminator */
-};
-
-/*
- * Check the current patch level on this CPU.
- *
- * @rev: Use it to return the patch level. It is set to 0 in the case of
- * error.
- *
- * Returns:
- * - true: if update should stop
- * - false: otherwise
- */
-bool check_current_patch_level(u32 *rev, bool early)
-{
- u32 lvl, dummy, i;
- bool ret = false;
- u32 *levels;
-
- native_rdmsr(MSR_AMD64_PATCH_LEVEL, lvl, dummy);
-
- if (IS_ENABLED(CONFIG_X86_32) && early)
- levels = (u32 *)__pa_nodebug(&final_levels);
- else
- levels = final_levels;
-
- for (i = 0; levels[i]; i++) {
- if (lvl == levels[i]) {
- lvl = 0;
- ret = true;
- break;
- }
- }
-
- if (rev)
- *rev = lvl;
-
- return ret;
-}
-
static int apply_microcode_amd(int cpu)
{
struct cpuinfo_x86 *c = &cpu_data(cpu);
struct microcode_amd *mc_amd;
struct ucode_cpu_info *uci;
struct ucode_patch *p;
- u32 rev;
+ u32 rev, dummy;
BUG_ON(raw_smp_processor_id() != cpu);
@@ -652,8 +597,7 @@ static int apply_microcode_amd(int cpu)
mc_amd = p->data;
uci->mc = p->data;
- if (check_current_patch_level(&rev, false))
- return -1;
+ rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
/* need to apply patch? */
if (rev >= mc_amd->hdr.patch_id) {
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index dc54518..3b74d2f 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -69,6 +69,42 @@ struct cpu_info_ctx {
int err;
};
+/*
+ * Those patch levels cannot be updated to newer ones and thus should be final.
+ */
+static u32 final_levels[] = {
+ 0x01000098,
+ 0x0100009f,
+ 0x010000af,
+ 0, /* T-101 terminator */
+};
+
+/*
+ * Check the current patch level on this CPU.
+ *
+ * Returns:
+ * - true: if update should stop
+ * - false: otherwise
+ */
+static bool amd_check_current_patch_level(void)
+{
+ u32 lvl, dummy, i;
+ u32 *levels;
+
+ native_rdmsr(MSR_AMD64_PATCH_LEVEL, lvl, dummy);
+
+ if (IS_ENABLED(CONFIG_X86_32))
+ levels = (u32 *)__pa_nodebug(&final_levels);
+ else
+ levels = final_levels;
+
+ for (i = 0; levels[i]; i++) {
+ if (lvl == levels[i])
+ return true;
+ }
+ return false;
+}
+
static bool __init check_loader_disabled_bsp(void)
{
static const char *__dis_opt_str = "dis_ucode_ldr";
@@ -95,6 +131,11 @@ static bool __init check_loader_disabled_bsp(void)
if (native_cpuid_ecx(1) & BIT(31))
return *res;
+ if (x86_cpuid_vendor() == X86_VENDOR_AMD) {
+ if (amd_check_current_patch_level())
+ return *res;
+ }
+
if (cmdline_find_option_bool(cmdline, option) <= 0)
*res = false;
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode/AMD: Unify load_ucode_amd_ap()
2017-01-20 20:29 ` [PATCH 13/16] x86/microcode/AMD: Unify load_ucode_amd_ap() Borislav Petkov
@ 2017-01-23 9:13 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:13 UTC (permalink / raw)
To: linux-tip-commits; +Cc: mingo, tglx, linux-kernel, hpa, bp
Commit-ID: e71bb4ec073901ad50bfa86fed74fce7ac3210fe
Gitweb: http://git.kernel.org/tip/e71bb4ec073901ad50bfa86fed74fce7ac3210fe
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:52 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:50 +0100
x86/microcode/AMD: Unify load_ucode_amd_ap()
Use a version for both bitness by adding a helper which does the actual
container finding and parsing which can be used on any CPU - BSP or AP.
Streamlines the paths more.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-14-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 81 ++++++++++++++-----------------------
1 file changed, 31 insertions(+), 50 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 6174347..fe9e865 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -261,7 +261,7 @@ static bool get_builtin_microcode(struct cpio_data *cp, unsigned int family)
#endif
}
-void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax)
+void __load_ucode_amd(unsigned int cpuid_1_eax, struct cpio_data *ret)
{
struct ucode_cpu_info *uci;
struct cpio_data cp;
@@ -281,89 +281,71 @@ void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax)
if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax)))
cp = find_microcode_in_initrd(path, use_pa);
- if (!(cp.data && cp.size))
- return;
-
/* Needed in load_microcode_amd() */
uci->cpu_sig.sig = cpuid_1_eax;
- apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true, NULL);
+ *ret = cp;
}
-#ifdef CONFIG_X86_32
-/*
- * On 32-bit, since AP's early load occurs before paging is turned on, we
- * cannot traverse cpu_equiv_table and microcode_cache in kernel heap memory.
- * So during cold boot, AP will apply_ucode_in_initrd() just like the BSP.
- * In save_microcode_in_initrd_amd() BSP's patch is copied to amd_ucode_patch,
- * which is used upon resume from suspend.
- */
-void load_ucode_amd_ap(unsigned int cpuid_1_eax)
+void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax)
{
- struct microcode_amd *mc;
- struct cpio_data cp;
+ struct cpio_data cp = { };
- mc = (struct microcode_amd *)__pa_nodebug(amd_ucode_patch);
- if (mc->hdr.patch_id && mc->hdr.processor_rev_id) {
- __apply_microcode_amd(mc);
- return;
- }
-
- if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax)))
- cp = find_microcode_in_initrd((const char *)__pa_nodebug(ucode_path), true);
+ __load_ucode_amd(cpuid_1_eax, &cp);
if (!(cp.data && cp.size))
return;
- /*
- * This would set amd_ucode_patch above so that the following APs can
- * use it directly instead of going down this path again.
- */
apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true, NULL);
}
-#else
+
void load_ucode_amd_ap(unsigned int cpuid_1_eax)
{
struct equiv_cpu_entry *eq;
struct microcode_amd *mc;
+ struct cont_desc *desc;
u16 eq_id;
+ if (IS_ENABLED(CONFIG_X86_32)) {
+ mc = (struct microcode_amd *)__pa_nodebug(amd_ucode_patch);
+ desc = (struct cont_desc *)__pa_nodebug(&cont);
+ } else {
+ mc = (struct microcode_amd *)amd_ucode_patch;
+ desc = &cont;
+ }
+
/* First AP hasn't cached it yet, go through the blob. */
- if (!cont.data) {
- struct cpio_data cp;
+ if (!desc->data) {
+ struct cpio_data cp = { };
- if (cont.size == -1)
+ if (desc->size == -1)
return;
reget:
- if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax))) {
- cp = find_microcode_in_initrd(ucode_path, false);
-
- if (!(cp.data && cp.size)) {
- /*
- * Mark it so that other APs do not scan again
- * for no real reason and slow down boot
- * needlessly.
- */
- cont.size = -1;
- return;
- }
+ __load_ucode_amd(cpuid_1_eax, &cp);
+ if (!(cp.data && cp.size)) {
+ /*
+ * Mark it so that other APs do not scan again for no
+ * real reason and slow down boot needlessly.
+ */
+ desc->size = -1;
+ return;
}
- if (!apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, false, &cont)) {
- cont.data = NULL;
- cont.size = -1;
+ if (!apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, false, desc)) {
+ desc->data = NULL;
+ desc->size = -1;
return;
}
}
- eq = (struct equiv_cpu_entry *)(cont.data + CONTAINER_HDR_SZ);
+ eq = (struct equiv_cpu_entry *)(desc->data + CONTAINER_HDR_SZ);
eq_id = find_equiv_id(eq, cpuid_1_eax);
if (!eq_id)
return;
- if (eq_id == cont.eq_id) {
+ if (eq_id == desc->eq_id) {
u32 rev, dummy;
native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
@@ -384,7 +366,6 @@ reget:
goto reget;
}
}
-#endif /* CONFIG_X86_32 */
static enum ucode_state
load_microcode_amd(int cpu, u8 family, const u8 *data, size_t size);
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode/AMD: Simplify saving from initrd
2017-01-20 20:29 ` [PATCH 14/16] x86/microcode/AMD: Simplify saving from initrd Borislav Petkov
@ 2017-01-23 9:13 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:13 UTC (permalink / raw)
To: linux-tip-commits; +Cc: tglx, linux-kernel, mingo, bp, hpa
Commit-ID: 72edfe950b36308353e27cdc02f334431239938a
Gitweb: http://git.kernel.org/tip/72edfe950b36308353e27cdc02f334431239938a
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:53 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:50 +0100
x86/microcode/AMD: Simplify saving from initrd
No need to use the previously stashed info in the container - simply go
ahead and parse the initrd once more. It simplifies and streamlines the
code a whole lot.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-15-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 43 +++++++++++--------------------------
1 file changed, 13 insertions(+), 30 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index fe9e865..2a194e3 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -372,43 +372,26 @@ load_microcode_amd(int cpu, u8 family, const u8 *data, size_t size);
int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)
{
+ struct cont_desc desc = { 0 };
enum ucode_state ret;
- int retval = 0;
-
- if (!cont.data) {
- if (IS_ENABLED(CONFIG_X86_32) && (cont.size != -1)) {
- struct cpio_data cp;
-
- cp = find_microcode_in_initrd(ucode_path, false);
- if (!(cp.data && cp.size)) {
- cont.size = -1;
- return -EINVAL;
- }
+ struct cpio_data cp;
- cont.cpuid_1_eax = cpuid_1_eax;
+ cp = find_microcode_in_initrd(ucode_path, false);
+ if (!(cp.data && cp.size))
+ return -EINVAL;
- scan_containers(cp.data, cp.size, &cont);
- if (!cont.eq_id) {
- cont.size = -1;
- return -EINVAL;
- }
+ desc.cpuid_1_eax = cpuid_1_eax;
- } else
- return -EINVAL;
- }
+ scan_containers(cp.data, cp.size, &desc);
+ if (!desc.eq_id)
+ return -EINVAL;
- ret = load_microcode_amd(smp_processor_id(), x86_family(cpuid_1_eax), cont.data, cont.size);
+ ret = load_microcode_amd(smp_processor_id(), x86_family(cpuid_1_eax),
+ desc.data, desc.size);
if (ret != UCODE_OK)
- retval = -EINVAL;
-
- /*
- * This will be freed any msec now, stash patches for the current
- * family and switch to patch cache for cpu hotplug, etc later.
- */
- cont.data = NULL;
- cont.size = 0;
+ return -EINVAL;
- return retval;
+ return 0;
}
void reload_ucode_amd(void)
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode/AMD: Remove AP scanning optimization
2017-01-20 20:29 ` [PATCH 15/16] x86/microcode/AMD: Remove AP scanning optimization Borislav Petkov
@ 2017-01-23 9:14 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:14 UTC (permalink / raw)
To: linux-tip-commits; +Cc: tglx, linux-kernel, mingo, bp, hpa
Commit-ID: 69f5f983001f6d097aac774a9e917f44657f3367
Gitweb: http://git.kernel.org/tip/69f5f983001f6d097aac774a9e917f44657f3367
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:54 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:51 +0100
x86/microcode/AMD: Remove AP scanning optimization
The idea was to not scan the microcode blob on each AP (Application
Processor) during boot and thus save us some milliseconds. However, on
architectures where the microcode engine is shared between threads, this
doesn't work. Here's why:
The microcode on CPU0, i.e., the first thread, gets updated. The second
thread, i.e., CPU1, i.e., the first AP walks into load_ucode_amd_ap(),
sees that there's no container cached and goes and scans for the proper
blob.
It finds it and as a last step of apply_microcode_early_amd(), it tries
to apply the patch but that core has already the updated microcode
revision which it has received through CPU0's update. So it returns
false and we do desc->size = -1 to prevent other APs from scanning.
However, the next AP, CPU2, has a different microcode engine which
hasn't been updated yet. The desc->size == -1 test prevents it from
scanning the blob anew and we fail to update it.
The fix is much more straight-forward than it looks: the BSP
(BootStrapping Processor), i.e., CPU0, caches the microcode patch
in amd_ucode_patch. We use that on the AP and try to apply it.
In the 99.9999% of cases where we have homogeneous cores - *not*
mixed-steppings - the application will be successful and we're good to
go.
In the remaining small set of systems, we will simply rescan the blob
and find (or not, if none present) the proper patch and apply it then.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-16-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 78 +++++++++----------------------------
1 file changed, 18 insertions(+), 60 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 2a194e3..5e1b577 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -45,14 +45,14 @@ static struct equiv_cpu_entry *equiv_cpu_table;
* save from the initrd/builtin before jettisoning its contents. @mc is the
* microcode patch we found to match.
*/
-static struct cont_desc {
+struct cont_desc {
struct microcode_amd *mc;
u32 cpuid_1_eax;
u32 psize;
u16 eq_id;
u8 *data;
size_t size;
-} cont;
+};
static u32 ucode_new_rev;
static u8 amd_ucode_patch[PATCH_MAX_SIZE];
@@ -201,8 +201,7 @@ static int __apply_microcode_amd(struct microcode_amd *mc)
* Returns true if container found (sets @desc), false otherwise.
*/
static bool
-apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
- bool save_patch, struct cont_desc *ret_desc)
+apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size, bool save_patch)
{
struct cont_desc desc = { 0 };
u8 (*patch)[PATCH_MAX_SIZE];
@@ -240,9 +239,6 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size,
memcpy(patch, mc, min_t(u32, desc.psize, PATCH_MAX_SIZE));
}
- if (ret_desc)
- *ret_desc = desc;
-
return ret;
}
@@ -292,79 +288,41 @@ void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax)
struct cpio_data cp = { };
__load_ucode_amd(cpuid_1_eax, &cp);
-
if (!(cp.data && cp.size))
return;
- apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true, NULL);
+ apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true);
}
void load_ucode_amd_ap(unsigned int cpuid_1_eax)
{
- struct equiv_cpu_entry *eq;
struct microcode_amd *mc;
- struct cont_desc *desc;
- u16 eq_id;
+ struct cpio_data cp;
+ u32 *new_rev, rev, dummy;
if (IS_ENABLED(CONFIG_X86_32)) {
- mc = (struct microcode_amd *)__pa_nodebug(amd_ucode_patch);
- desc = (struct cont_desc *)__pa_nodebug(&cont);
+ mc = (struct microcode_amd *)__pa_nodebug(amd_ucode_patch);
+ new_rev = (u32 *)__pa_nodebug(&ucode_new_rev);
} else {
- mc = (struct microcode_amd *)amd_ucode_patch;
- desc = &cont;
+ mc = (struct microcode_amd *)amd_ucode_patch;
+ new_rev = &ucode_new_rev;
}
- /* First AP hasn't cached it yet, go through the blob. */
- if (!desc->data) {
- struct cpio_data cp = { };
-
- if (desc->size == -1)
- return;
-
-reget:
- __load_ucode_amd(cpuid_1_eax, &cp);
- if (!(cp.data && cp.size)) {
- /*
- * Mark it so that other APs do not scan again for no
- * real reason and slow down boot needlessly.
- */
- desc->size = -1;
- return;
- }
+ native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
- if (!apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, false, desc)) {
- desc->data = NULL;
- desc->size = -1;
+ /* Check whether we have saved a new patch already: */
+ if (*new_rev && rev < mc->hdr.patch_id) {
+ if (!__apply_microcode_amd(mc)) {
+ *new_rev = mc->hdr.patch_id;
return;
}
}
- eq = (struct equiv_cpu_entry *)(desc->data + CONTAINER_HDR_SZ);
-
- eq_id = find_equiv_id(eq, cpuid_1_eax);
- if (!eq_id)
+ __load_ucode_amd(cpuid_1_eax, &cp);
+ if (!(cp.data && cp.size))
return;
- if (eq_id == desc->eq_id) {
- u32 rev, dummy;
-
- native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
-
- mc = (struct microcode_amd *)amd_ucode_patch;
-
- if (mc && rev < mc->hdr.patch_id) {
- if (!__apply_microcode_amd(mc))
- ucode_new_rev = mc->hdr.patch_id;
- }
-
- } else {
-
- /*
- * AP has a different equivalence ID than BSP, looks like
- * mixed-steppings silicon so go through the ucode blob anew.
- */
- goto reget;
- }
+ apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, false);
}
static enum ucode_state
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [tip:x86/mce] x86/microcode/AMD: Remove struct cont_desc.eq_id
2017-01-20 20:29 ` [PATCH 16/16] x86/microcode/AMD: Remove struct cont_desc.eq_id Borislav Petkov
@ 2017-01-23 9:14 ` tip-bot for Borislav Petkov
0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Borislav Petkov @ 2017-01-23 9:14 UTC (permalink / raw)
To: linux-tip-commits; +Cc: mingo, bp, hpa, linux-kernel, tglx
Commit-ID: da0aa3dde05108e180eecd76534c55f43ea4b9c8
Gitweb: http://git.kernel.org/tip/da0aa3dde05108e180eecd76534c55f43ea4b9c8
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 20 Jan 2017 21:29:55 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 23 Jan 2017 10:02:51 +0100
x86/microcode/AMD: Remove struct cont_desc.eq_id
The equivalence ID was needed outside of the container scanning logic
but now, after this has been cleaned up, not anymore. Now, cont_desc.mc
is used to denote whether the container we're looking at has the proper
microcode patch for this CPU or not.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-17-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/microcode/amd.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 5e1b577..7889ae4 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -49,7 +49,6 @@ struct cont_desc {
struct microcode_amd *mc;
u32 cpuid_1_eax;
u32 psize;
- u16 eq_id;
u8 *data;
size_t size;
};
@@ -92,10 +91,8 @@ static ssize_t parse_container(u8 *ucode, ssize_t size, struct cont_desc *desc)
/* Am I looking at an equivalence table header? */
if (hdr[0] != UCODE_MAGIC ||
hdr[1] != UCODE_EQUIV_CPU_TABLE_TYPE ||
- hdr[2] == 0) {
- desc->eq_id = 0;
+ hdr[2] == 0)
return CONTAINER_HDR_SZ;
- }
buf = ucode;
@@ -147,9 +144,8 @@ static ssize_t parse_container(u8 *ucode, ssize_t size, struct cont_desc *desc)
* buffer.
*/
if (desc->mc) {
- desc->eq_id = eq_id;
- desc->data = ucode;
- desc->size = orig_size - size;
+ desc->data = ucode;
+ desc->size = orig_size - size;
return 0;
}
@@ -220,8 +216,6 @@ apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size, bool save_p
desc.cpuid_1_eax = cpuid_1_eax;
scan_containers(ucode, size, &desc);
- if (!desc.eq_id)
- return ret;
mc = desc.mc;
if (!mc)
@@ -341,7 +335,7 @@ int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)
desc.cpuid_1_eax = cpuid_1_eax;
scan_containers(cp.data, cp.size, &desc);
- if (!desc.eq_id)
+ if (!desc.mc)
return -EINVAL;
ret = load_microcode_amd(smp_processor_id(), x86_family(cpuid_1_eax),
^ permalink raw reply related [flat|nested] 33+ messages in thread
end of thread, other threads:[~2017-01-23 9:43 UTC | newest]
Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-01-20 20:29 [PATCH 00/16 v2] x86/microcode: 4.11 queue Borislav Petkov
2017-01-20 20:29 ` [PATCH 01/16] x86/microcode/intel: Drop stashed AP patch pointer optimization Borislav Petkov
2017-01-23 9:07 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 02/16] x86/MSR: Carve out bare minimum accessors Borislav Petkov
2017-01-23 9:07 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 03/16] x86/microcode: Convert to bare minimum MSR accessors Borislav Petkov
2017-01-23 9:08 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 04/16] x86/microcode/AMD: Clean up find_equiv_id() Borislav Petkov
2017-01-23 9:08 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 05/16] x86/microcode/AMD: Shorten function parameter's name Borislav Petkov
2017-01-23 9:09 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 06/16] x86/microcode/AMD: Extend the container struct Borislav Petkov
2017-01-23 9:09 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 07/16] x86/microcode/AMD: Rework container parsing Borislav Petkov
2017-01-23 9:10 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 08/16] x86/microcode: Decrease CPUID use Borislav Petkov
2017-01-23 9:10 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 09/16] x86/microcode/AMD: Get rid of global this_equiv_id Borislav Petkov
2017-01-23 9:11 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 10/16] x86/microcode/AMD: Use find_microcode_in_initrd() Borislav Petkov
2017-01-23 9:11 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 11/16] x86/microcode: Remove local vendor variable Borislav Petkov
2017-01-23 9:12 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 12/16] x86/microcode/AMD: Check patch level only on the BSP Borislav Petkov
2017-01-23 9:12 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 13/16] x86/microcode/AMD: Unify load_ucode_amd_ap() Borislav Petkov
2017-01-23 9:13 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 14/16] x86/microcode/AMD: Simplify saving from initrd Borislav Petkov
2017-01-23 9:13 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 15/16] x86/microcode/AMD: Remove AP scanning optimization Borislav Petkov
2017-01-23 9:14 ` [tip:x86/mce] " tip-bot for Borislav Petkov
2017-01-20 20:29 ` [PATCH 16/16] x86/microcode/AMD: Remove struct cont_desc.eq_id Borislav Petkov
2017-01-23 9:14 ` [tip:x86/mce] " tip-bot for Borislav Petkov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.