On Fri, Jan 27, 2017 at 04:52:37PM -0600, Rob Herring wrote: > On Fri, Jan 27, 2017 at 4:19 PM, Thierry Reding > wrote: > > On Fri, Jan 27, 2017 at 09:39:38AM +0100, Thierry Reding wrote: > >> From: Stephen Warren > >> > >> In Tegra186, the BPMP (Boot and Power Management Processor) owns certain > >> HW devices, such as the I2C controller for the power management I2C bus. > >> Software running on other CPUs must perform IPC to the BPMP in order to > >> execute transactions on that I2C bus. This binding describes an I2C bus > >> that is accessed in such a fashion. > >> > >> Signed-off-by: Stephen Warren > >> Reviewed-by: Simon Glass > >> Signed-off-by: Tom Warren > >> Acked-by: Jon Hunter > >> Signed-off-by: Thierry Reding > >> --- > >> .../bindings/i2c/nvidia,tegra186-bpmp-i2c.txt | 42 ++++++++++++++++++++++ > >> 1 file changed, 42 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt > > > > Rob, sorry for not Cc'ing you earlier on this, but I had thought this > > binding had already been reviewed and acked since it is merged in > > U-Boot. > > Ha! Good one. :( So I went looking for earlier discussion on this patch because I distinctly remembered you being part of it, and found this: https://patchwork.ozlabs.org/patch/650385/ You already gave an Acked-by, but I failed to pick it up for some reason. Given what you said below I'm going to assume that it still applies. Wolfram, do you want me to resend with Rob's Acked-by from back in July or do you want to add it yourself when applying? Thanks, Thierry > > Wolfram was concerned in particular about the nvidia,bpmp-bus-id > > property below. > > > > Can you give this a quick look, please? > > > > Thanks, > > Thierry > > > >> diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt > >> new file mode 100644 > >> index 000000000000..ab240e10debc > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt > >> @@ -0,0 +1,42 @@ > >> +NVIDIA Tegra186 BPMP I2C controller > >> + > >> +In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW > >> +devices, such as the I2C controller for the power management I2C bus. Software > >> +running on other CPUs must perform IPC to the BPMP in order to execute > >> +transactions on that I2C bus. This binding describes an I2C bus that is > >> +accessed in such a fashion. > >> + > >> +The BPMP I2C node must be located directly inside the main BPMP node. See > >> +../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding. > >> + > >> +This node represents an I2C controller. See ../i2c/i2c.txt for details of the > >> +core I2C binding. > >> + > >> +Required properties: > >> +- compatible: > >> + Array of strings. > >> + One of: > >> + - "nvidia,tegra186-bpmp-i2c". > >> +- #address-cells: Address cells for I2C device address. > >> + Single-cell integer. > >> + Must be <1>. > >> +- #size-cells: > >> + Single-cell integer. > >> + Must be <0>. > >> +- nvidia,bpmp-bus-id: > >> + Single-cell integer. > >> + Indicates the I2C bus number this DT node represent, as defined by the > >> + BPMP firmware. > > This seems okay to me given it's a pretty specific use and dictated by > the firmware. If there were multiple, then perhaps we should use reg, > but that may collide with other BPMP child nodes. > > Rob > -- > To unsubscribe from this list: send the line "unsubscribe linux-tegra" in > the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > More majordomo info at http://vger.kernel.org/majordomo-info.html