On Tue, Feb 07, 2017 at 08:50:45PM +0300, lis8215@gmail.com wrote: > From: Siarhei Volkau > > This patch introduce the sun6i PWM driver itself: > - sun6i register operations, > - sun6i prescaler table, > - DT bindings for A31 SoC, > - documentation update. > > Signed-off-by: Siarhei Volkau > --- > .../devicetree/bindings/pwm/pwm-sun4i.txt | 3 +- > drivers/pwm/pwm-sun4i.c | 71 ++++++++++++++++++++++ > 2 files changed, 73 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt > index f1cbeef..b737934 100644 > --- a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt > +++ b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt > @@ -1,10 +1,11 @@ > -Allwinner sun4i and sun7i SoC PWM controller > +Allwinner sun4i, sun6i and sun7i SoC PWM controller > > Required properties: > - compatible: should be one of: > - "allwinner,sun4i-a10-pwm" > - "allwinner,sun5i-a10s-pwm" > - "allwinner,sun5i-a13-pwm" > + - "allwinner,sun6i-a31-pwm" > - "allwinner,sun7i-a20-pwm" > - "allwinner,sun8i-h3-pwm" > - reg: physical base address and length of the controller's registers > diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c > index 39912fc..0c1c372 100644 > --- a/drivers/pwm/pwm-sun4i.c > +++ b/drivers/pwm/pwm-sun4i.c > @@ -47,6 +47,12 @@ > > #define BIT_CH(bit, chan) ((bit) << ((chan) * PWMCH_OFFSET)) > > +#define SUN6I_PWM_RDY_BIT PWM_RDY_BASE > +#define SUN6I_PWM_CTL_OFFS 0x0 > +#define SUN6I_PWM_PRD_OFFS 0x4 > +#define SUN6I_PWM_CH_CTL(ch) (0x10 * (ch) + SUN6I_PWM_CTL_OFFS) > +#define SUN6I_PWM_CH_PRD(ch) (0x10 * (ch) + SUN6I_PWM_PRD_OFFS) > + > struct sun4i_pwm_chip; > > static const u32 sun4i_prescaler_table[] = { > @@ -68,6 +74,25 @@ static const u32 sun4i_prescaler_table[] = { > 0, /* Actually 1 but tested separately */ > }; > > +static const u32 sun6i_prescaler_table[] = { > + 1, > + 2, > + 4, > + 8, > + 16, > + 32, > + 64, > + 0, > + 0, > + 0, > + 0, > + 0, > + 0, > + 0, > + 0, > + 0, > +}; > + > struct sunxi_reg_ops { > int (*ctl_rdy)(struct sun4i_pwm_chip *chip, int npwm); > u32 (*ctl_read)(struct sun4i_pwm_chip *chip, int npwm); > @@ -140,6 +165,33 @@ static void sun4i_reg_prd_write(struct sun4i_pwm_chip *chip, int npwm, u32 val) > sun4i_pwm_writel(chip, val, PWM_CH_PRD(npwm)); > } > > +static int sun6i_reg_ctl_rdy(struct sun4i_pwm_chip *chip, int npwm) > +{ > + u32 val = sun4i_pwm_readl(chip, SUN6I_PWM_CH_CTL(npwm)); > + > + return val & BIT(SUN6I_PWM_RDY_BIT); > +} > + > +static u32 sun6i_reg_ctl_read(struct sun4i_pwm_chip *chip, int npwm) > +{ > + return sun4i_pwm_readl(chip, SUN6I_PWM_CH_CTL(npwm)); > +} > + > +static void sun6i_reg_ctl_write(struct sun4i_pwm_chip *chip, int npwm, u32 val) > +{ > + return sun4i_pwm_writel(chip, val, SUN6I_PWM_CH_CTL(npwm)); > +} > + > +static u32 sun6i_reg_prd_read(struct sun4i_pwm_chip *chip, int npwm) > +{ > + return sun4i_pwm_readl(chip, SUN6I_PWM_CH_PRD(npwm)); > +} > + > +static void sun6i_reg_prd_write(struct sun4i_pwm_chip *chip, int npwm, u32 val) > +{ > + return sun4i_pwm_writel(chip, val, SUN6I_PWM_CH_PRD(npwm)); > +} > + > static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, > int duty_ns, int period_ns) > { > @@ -306,6 +358,14 @@ static const struct sunxi_reg_ops sun4i_reg_ops = { > .prd_write = sun4i_reg_prd_write, > }; > > +static const struct sunxi_reg_ops sun6i_reg_ops = { > + .ctl_rdy = sun6i_reg_ctl_rdy, > + .ctl_read = sun6i_reg_ctl_read, > + .ctl_write = sun6i_reg_ctl_write, > + .prd_read = sun6i_reg_prd_read, > + .prd_write = sun6i_reg_prd_write, > +}; > + ... And use regmap's reg_field to deal with the different offsets in that case ? Looks quite good otherwise, thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com