All of lore.kernel.org
 help / color / mirror / Atom feed
From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
To: linux-bluetooth@vger.kernel.org
Cc: patrik.flykt@linux.intel.com, aar@pengutronix.de,
	linux-wpan@vger.kernel.org
Subject: [PATCH v3 5/5] 6lowpan: Use netdev addr_len to determine lladdr len
Date: Fri, 17 Feb 2017 17:50:03 +0200	[thread overview]
Message-ID: <20170217155003.4594-6-luiz.dentz@gmail.com> (raw)
In-Reply-To: <20170217155003.4594-1-luiz.dentz@gmail.com>

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This allow technologies such as Bluetooth to use its native lladdr which
is eui48 instead of eui64 which was expected by functions like
lowpan_header_decompress and lowpan_header_compress.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 include/net/6lowpan.h   | 19 +++++++++++++++++++
 net/6lowpan/iphc.c      | 49 +++++++++++++++++++++++++++++++++++++------------
 net/bluetooth/6lowpan.c | 42 ++++++------------------------------------
 3 files changed, 62 insertions(+), 48 deletions(-)

diff --git a/include/net/6lowpan.h b/include/net/6lowpan.h
index 5ab4c99..c5792cb 100644
--- a/include/net/6lowpan.h
+++ b/include/net/6lowpan.h
@@ -198,6 +198,25 @@ static inline void lowpan_iphc_uncompress_eui64_lladdr(struct in6_addr *ipaddr,
 	ipaddr->s6_addr[8] ^= 0x02;
 }
 
+static inline void lowpan_iphc_uncompress_eui48_lladdr(struct in6_addr *ipaddr,
+						       const void *lladdr)
+{
+	/* fe:80::XXXX:XXff:feXX:XXXX
+	 *        \_________________/
+	 *              hwaddr
+	 */
+	ipaddr->s6_addr[0] = 0xFE;
+	ipaddr->s6_addr[1] = 0x80;
+	memcpy(&ipaddr->s6_addr[8], lladdr, 3);
+	ipaddr->s6_addr[11] = 0xFF;
+	ipaddr->s6_addr[12] = 0xFE;
+	memcpy(&ipaddr->s6_addr[13], lladdr + 3, 3);
+	/* second bit-flip (Universe/Local)
+	 * is done according RFC2464
+	 */
+	ipaddr->s6_addr[8] ^= 0x02;
+}
+
 #ifdef DEBUG
 /* print data in line */
 static inline void raw_dump_inline(const char *caller, char *msg,
diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
index fb5f6fa..ddbeeb7 100644
--- a/net/6lowpan/iphc.c
+++ b/net/6lowpan/iphc.c
@@ -278,6 +278,22 @@ lowpan_iphc_ctx_get_by_mcast_addr(const struct net_device *dev,
 	return ret;
 }
 
+static void lowpan_iphc_uncompress_lladdr(const struct net_device *dev,
+					  struct in6_addr *ipaddr,
+					  const void *lladdr)
+{
+	switch (dev->addr_len) {
+	case ETH_ALEN:
+		lowpan_iphc_uncompress_eui48_lladdr(ipaddr, lladdr);
+		break;
+	case EUI64_ADDR_LEN:
+		lowpan_iphc_uncompress_eui64_lladdr(ipaddr, lladdr);
+		break;
+	default:
+		WARN_ON_ONCE(1);
+	}
+}
+
 /* Uncompress address function for source and
  * destination address(non-multicast).
  *
@@ -320,8 +336,7 @@ static int lowpan_iphc_uncompress_addr(struct sk_buff *skb,
 			lowpan_iphc_uncompress_802154_lladdr(ipaddr, lladdr);
 			break;
 		default:
-			lowpan_iphc_uncompress_eui64_lladdr(ipaddr, lladdr);
-			break;
+			lowpan_iphc_uncompress_lladdr(dev, ipaddr, lladdr);
 		}
 		break;
 	default:
@@ -381,7 +396,7 @@ static int lowpan_iphc_uncompress_ctx_addr(struct sk_buff *skb,
 			lowpan_iphc_uncompress_802154_lladdr(ipaddr, lladdr);
 			break;
 		default:
-			lowpan_iphc_uncompress_eui64_lladdr(ipaddr, lladdr);
+			lowpan_iphc_uncompress_lladdr(dev, ipaddr, lladdr);
 			break;
 		}
 		ipv6_addr_prefix_copy(ipaddr, &ctx->pfx, ctx->plen);
@@ -810,6 +825,21 @@ lowpan_iphc_compress_ctx_802154_lladdr(const struct in6_addr *ipaddr,
 	return lladdr_compress;
 }
 
+static bool lowpan_iphc_addr_equal(const struct net_device *dev,
+				   const struct lowpan_iphc_ctx *ctx,
+				   const struct in6_addr *ipaddr,
+				   const void *lladdr)
+{
+	struct in6_addr tmp = {};
+
+	lowpan_iphc_uncompress_lladdr(dev, &tmp, lladdr);
+
+	if (ctx)
+		ipv6_addr_prefix_copy(&tmp, &ctx->pfx, ctx->plen);
+
+	return ipv6_addr_equal(&tmp, ipaddr);
+}
+
 static u8 lowpan_compress_ctx_addr(u8 **hc_ptr, const struct net_device *dev,
 				   const struct in6_addr *ipaddr,
 				   const struct lowpan_iphc_ctx *ctx,
@@ -827,13 +857,7 @@ static u8 lowpan_compress_ctx_addr(u8 **hc_ptr, const struct net_device *dev,
 		}
 		break;
 	default:
-		/* check for SAM/DAM = 11 */
-		memcpy(&tmp.s6_addr[8], lladdr, EUI64_ADDR_LEN);
-		/* second bit-flip (Universe/Local) is done according RFC2464 */
-		tmp.s6_addr[8] ^= 0x02;
-		/* context information are always used */
-		ipv6_addr_prefix_copy(&tmp, &ctx->pfx, ctx->plen);
-		if (ipv6_addr_equal(&tmp, ipaddr)) {
+		if (lowpan_iphc_addr_equal(dev, ctx, ipaddr, lladdr)) {
 			dam = LOWPAN_IPHC_DAM_11;
 			goto out;
 		}
@@ -929,11 +953,12 @@ static u8 lowpan_compress_addr_64(u8 **hc_ptr, const struct net_device *dev,
 		}
 		break;
 	default:
-		if (is_addr_mac_addr_based(ipaddr, lladdr)) {
-			dam = LOWPAN_IPHC_DAM_11; /* 0-bits */
+		if (lowpan_iphc_addr_equal(dev, NULL, ipaddr, lladdr)) {
+			dam = LOWPAN_IPHC_DAM_11;
 			pr_debug("address compression 0 bits\n");
 			goto out;
 		}
+
 		break;
 	}
 
diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index 1456b01..0b68cfc 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -64,7 +64,7 @@ struct lowpan_peer {
 	struct l2cap_chan *chan;
 
 	/* peer addresses in various formats */
-	unsigned char eui64_addr[EUI64_ADDR_LEN];
+	unsigned char lladdr[ETH_ALEN];
 	struct in6_addr peer_addr;
 };
 
@@ -80,8 +80,6 @@ struct lowpan_btle_dev {
 	struct delayed_work notify_peers;
 };
 
-static void set_addr(u8 *eui, u8 *addr, u8 addr_type);
-
 static inline struct lowpan_btle_dev *
 lowpan_btle_dev(const struct net_device *netdev)
 {
@@ -277,7 +275,6 @@ static int iphc_decompress(struct sk_buff *skb, struct net_device *netdev,
 	const u8 *saddr;
 	struct lowpan_btle_dev *dev;
 	struct lowpan_peer *peer;
-	unsigned char eui64_daddr[EUI64_ADDR_LEN];
 
 	dev = lowpan_btle_dev(netdev);
 
@@ -287,10 +284,9 @@ static int iphc_decompress(struct sk_buff *skb, struct net_device *netdev,
 	if (!peer)
 		return -EINVAL;
 
-	saddr = peer->eui64_addr;
-	set_addr(&eui64_daddr[0], chan->src.b, chan->src_type);
+	saddr = peer->lladdr;
 
-	return lowpan_header_decompress(skb, netdev, &eui64_daddr, saddr);
+	return lowpan_header_decompress(skb, netdev, netdev->dev_addr, saddr);
 }
 
 static int recv_pkt(struct sk_buff *skb, struct net_device *dev,
@@ -477,7 +473,7 @@ static int setup_header(struct sk_buff *skb, struct net_device *netdev,
 			}
 		}
 
-		daddr = peer->eui64_addr;
+		daddr = peer->lladdr;
 		*peer_addr = addr;
 		*peer_addr_type = addr_type;
 		lowpan_cb(skb)->chan = peer->chan;
@@ -663,27 +659,6 @@ static struct device_type bt_type = {
 	.name	= "bluetooth",
 };
 
-static void set_addr(u8 *eui, u8 *addr, u8 addr_type)
-{
-	/* addr is the BT address in little-endian format */
-	eui[0] = addr[5];
-	eui[1] = addr[4];
-	eui[2] = addr[3];
-	eui[3] = 0xFF;
-	eui[4] = 0xFE;
-	eui[5] = addr[2];
-	eui[6] = addr[1];
-	eui[7] = addr[0];
-
-	/* Universal/local bit set, BT 6lowpan draft ch. 3.2.1 */
-	if (addr_type == BDADDR_LE_PUBLIC)
-		eui[0] &= ~0x02;
-	else
-		eui[0] |= 0x02;
-
-	BT_DBG("type %d addr %*phC", addr_type, 8, eui);
-}
-
 static void ifup(struct net_device *netdev)
 {
 	int err;
@@ -762,14 +737,9 @@ static struct l2cap_chan *add_peer_chan(struct l2cap_chan *chan,
 	peer->chan = chan;
 	memset(&peer->peer_addr, 0, sizeof(struct in6_addr));
 
-	/* RFC 2464 ch. 5 */
-	peer->peer_addr.s6_addr[0] = 0xFE;
-	peer->peer_addr.s6_addr[1] = 0x80;
-	set_addr((u8 *)&peer->peer_addr.s6_addr + 8, chan->dst.b,
-		 chan->dst_type);
+	baswap((void *)peer->lladdr, &chan->dst);
 
-	memcpy(&peer->eui64_addr, (u8 *)&peer->peer_addr.s6_addr + 8,
-	       EUI64_ADDR_LEN);
+	lowpan_iphc_uncompress_eui48_lladdr(&peer->peer_addr, peer->lladdr);
 
 	/* IPv6 address needs to have the U/L bit set properly so toggle
 	 * it back here.
-- 
2.9.3


  parent reply	other threads:[~2017-02-17 15:50 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-17 15:49 [PATCH v3 0/5] Bluetooth: 6LoWPAN: Fix lladdr length Luiz Augusto von Dentz
2017-02-17 15:49 ` [PATCH v3 1/5] bluetooth: Set 6 byte device addresses Luiz Augusto von Dentz
2017-02-20 21:56   ` Stefan Schmidt
2017-02-17 15:50 ` [PATCH v3 2/5] 6lowpan: Set MAC address lenght according to LOWPAN_LLTYPE Luiz Augusto von Dentz
2017-02-20 21:58   ` Stefan Schmidt
2017-02-17 15:50 ` [PATCH v3 3/5] 6lowpan: iphc: override l2 packet information Luiz Augusto von Dentz
2017-02-20 22:03   ` Stefan Schmidt
2017-02-17 15:50 ` [PATCH v3 4/5] ipv6: addrconf: fix 48 bit 6lowpan autoconfiguration Luiz Augusto von Dentz
     [not found]   ` <20170217155003.4594-5-luiz.dentz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-02-20 22:10     ` Stefan Schmidt
2017-02-20 22:10       ` Stefan Schmidt
2017-02-21  8:49       ` Luiz Augusto von Dentz
2017-02-17 15:50 ` Luiz Augusto von Dentz [this message]
2017-02-20 22:15   ` [PATCH v3 5/5] 6lowpan: Use netdev addr_len to determine lladdr len Stefan Schmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170217155003.4594-6-luiz.dentz@gmail.com \
    --to=luiz.dentz@gmail.com \
    --cc=aar@pengutronix.de \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-wpan@vger.kernel.org \
    --cc=patrik.flykt@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.